Engineering Technician jobs at Belcan

Job Title - Electrical Build Engineering Technician An Engineering Technician job opportunity is open with our client in Berkeley, CA. In this role you will support the development, testing, and validation of energy storage products. This role is hands-on and critical to building the electrical test infrastructure that enables safe, reliable evaluation of PCBAs, battery cells, modules, and system-level hardware. To be considered for this role you will have 3+ years of hands-on experience as an engineering technician, electrical technician, panel builder, or similar role. Engineering Technician, Electrical Build job opportunities * Detail-oriented, thrives in a lab environment, and has experience with control panel wiring, harness fabrication, and PCBA assembly. * Assemble and wire industrial control panels in accordance with UL508A standards. * Read and interpret electrical schematics, wiring diagrams, and layout drawings. ● Fabricate complex wire harnesses and cable assemblies to support prototypes, test fixtures, and system integration. * Perform crimping, routing, labeling, and continuity verification. * Assemble, rework, and repair PCBAs, including through-hole and surface-mount components. * Execute fine-pitch SMD hand-soldering, hot-air rework, and inspection using microscopes and rework tools. * Support prototypes bring-up and troubleshooting alongside electrical engineers. * Construct and maintain electrical test fixtures, load boxes, wiring assemblies, and custom hardware used to characterize and validate battery cells, modules, and electronic subsystems. * Install instrumentation, sensors, power supplies, data acquisition systems, and safety interlocks as needed. * Support test engineers and product engineers in setting up and executing electrical tests. Knowledge/Skills/Education/Experience * 3+ years of hands-on experience as an engineering technician, electrical technician, panel builder, or similar role. * Strong proficiency in electrical wiring, cable harness fabrication, and panel assembly. * Demonstrated skill in soldering (SMD and through-hole), PCBA assembly, and rework. * Ability to read and interpret electrical schematics, panel layouts, and mechanical drawings. * Familiarity with standard electrical tools, test equipment, and safety practices (DMMs, oscilloscopes, power supplies, etc.). * Experience working with industrial control panels or UL508A-compliant builds. * Strong attention to detail, craftsmanship, and pride in quality builds. * Comfortable in a fast-paced environment with shifting priorities. * Proactive problem-solver who can work independently or as part of a team. * Safety-minded, organized, and committed to continuous improvement. If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

: Crown Equipment Corporation is one of the world's largest material handling companies, with a reputation for award-winning product design, advanced engineering and technology, and superior after-sale service. Crown produces and sells a broad range of forklifts, batteries, chargers, automation and fleet management technologies that are revolutionizing the material-handling industry. Job Posting External Job Duties Lead, organize and coordinate all engineering activities involved in one or more large-scale product development projects from concept to production. Product and Technology Champion - Champion and lead the development of new products. Study competitive products and new emerging technologies. Make recommendations to upgrade, improve, and evolve products and processes. Work directly with customers, sales teams, and development teams to ensure product meets customer requirements. Study customer applications and propose innovative products and features that improve customer processes. Identify customer application issues and propose solutions to improve those issues. Conduct product reviews to ensure that a competitive and innovative product is released for production. Project Planning, Supervision and Technical Review - Design workflow chart, man-hours, material and activities needed to complete projects. Oversee development of project definitions, specifications and guidelines. Ensure project meets objectives. Lead and manage assigned resources to ensure project timeliness and appropriate direction. Delegate workload to assigned personnel involved with project. Establish scope and work priority. Answer questions, give direction, and monitor project activities to ensure deadline requirements are met. Monitor and ensure that integrity of design be maintained through the use of sound engineering practice and conformance to product goals, specifications, company and industry standards. Review test results to ensure compliance with company and industry standards or guidelines. Propose and implement tools and other improvements to the product development process. Resolve engineering design issues. Organizational and Employee Development - Work to build the capability of the individuals within the project teams by providing opportunities for coaching, mentoring, training and developmental assignments. Conduct Talent Development Discussions. Leadership and Communication - Regularly communicate project status to supervisor, management and other departments. Communicate project objectives, expectations and company related information to the project team. Monitor staff quality of work, productivity and review with supervisors. Provide leadership while collaborating with other department managers to coordinate efforts and schedule for the development of components and other deliverables necessary to complete project. Perform other tasks as assigned. Minimum Qualifications Bachelor degree in Engineering or related field Minimum of 5 years of experience in product development engineering environment Good written, verbal, organizational, and interpersonal skills Ability to occasionally travel with occasional overnight stays (0-5%) Reliable transportation to travel locally between company locations during scheduled workday Per 8-hour shift. Sit 8 hours and stand 0 hours. Typical office environment (Low noise level, limited exposure hot/cold temperatures, dust, fumes, and vibrations.) Regular interaction with others and performs a high degree of independent work. Continuously grasp/grip (whole hand) and occasionally pinch grasp (hold item between index finger & thumb). Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking, and climbing stairs. Occasional use of office equipment (copiers, printers, etc.). Preferred Qualifications Working knowledge of lift truck design, vehicle control systems, battery integration, industrial design, and ergonomics. Project management and supervisory experience. Work Authorization: Indefinite U.S. work authorized individuals only. Individuals with temporary visas are ineligible. Sponsorship for work authorization, now or in the future, is unavailable. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

We are Now Hiring a Technician III in Waterford, NJ! Transdev in Waterford, NJ is seeking an experienced Gasoline, Diesel, and / or CNG Mechanics to bolster our team. This role demands expertise in diagnosing, repairing, and maintenance across various vehicles and equipment. As a Technician III, you'll play a crucial role in ensuring safety, efficiency, and longevity for our assets. \ Resume must be submitted with application.\ Transdev is proud to offer: Competitive compensation package of minimum $25.90 - Maximum $35.00 Benefits include: Vacation: minimum of one (1) week Sick days: 5 days Holidays: 13 days: 11 standard and 2 floating Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. Key Responsibilities: Conduct diagnostic tests to identify issues and determine necessary repairs on gasoline, diesel, or CNG engines. Perform routine maintenance tasks to prevent breakdowns and optimize performance. Collaborate with team members to ensure efficient and accurate repairs Complete preventative maintenance (PMs), safety inspections, and annual maintenance inspections. Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for gasoline, diesel, and CNG engines. Perform advanced troubleshooting and repair tasks on gasoline, diesel, and CNG engines, including overhauling and rebuilding components to required specifications. Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge. Other duties as required. Qualifications: 2 years of experience as a Gasoline, Diesel, or CNG Mechanic. ASE certifications preferred; ASE certification program provided. Mechanic's Tool Set Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. Physical Requirements: The essential functions of this position require the ability to: Work outside in varying temperature, weather, and humidity conditions-100% of the job is performed outside, work alone and in remote locations. Sit for extended periods (up to 6-8 hours per day); frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces Push and pull objects, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to files or equipment stored at ground level Withstand heavy traffic areas while performing the duties of the job; tolerate exposure to considerable amounts of dust, vehicle fumes and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact ************************************ Drug-free workplace: Transdev maintains a drug-free workplace. Applicants must: Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.). Successfully pass a pre-employment drug screen. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at ****************** or watch an overview video at ******************* O5cv0G4mQ The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants: PleaseClick Herefor CA Employee Privacy Policy. Job Category: Mechanics/Technicians Job Type: Full Time Req ID: 6026 Pay Group: 1ET Cost Center: 49740 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at http://****************** or watch an overview video.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing is hiring for an Electrophysics Engr-Scien (IR/Electro-Optical-Visual) Experience or Senior Level to work on our team located in Berkeley, MO. The IRMA Electro-physics Engineer/Scientist position provides key expertise to the software development team: developing algorithms, supporting the implementation by the software development team, and performing analysis of laboratory and flight test data. The position requires knowledge and experience with platform signature and survivability modeling, Electro-Optical and Infra-Red (EO/IR) sensors and sensor processing, including impacts of environmental conditions. The IRMA engineer will support integration of IRMA mission systems into platform(s), including the development of enhancements/requirements for new platform types. Position Responsibilities: Assists in developing and documenting requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Performs basic analysis to predict component performance to established requirements. Conducts simple tests to validate performance of designs to requirements. Collects data on supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle. Supports project management by gathering project status data. Gathers information to support development of sections of proposals to support development of new business. Works under close supervision. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an Active U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. (A U.S. Security Clearance that has been active in the past 24 months is considered active) A final U.S. Secret Clearance Pre-Start is required. Basic Qualifications (Required Skill/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement (Level 4) 9+ years of work related engineering experience with a Bachelor's or 7+ years of work related engineering experience with a Master's or 4+ years of work related engineering experience with a PhD Preferred Qualifications (Desired Skills/Experience): (Level 5) 14+ years of work-related experience with a Bachelors degree or 12+ years of work-related experience with a Masters or 9+ years of work-related experience with a PhD 9+ years of experience with electromagnetic systems Typical Education for Lead Level: Level 4: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Level 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 4: $118,150 - $159,850 Level 5: $145,350 - $196,650 Boeing offers the best benefits in Aerospace: Boeing offers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Applications for this position will be accepted until Dec. 31, 2025 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Title: Electrical Technician ll Zip Code: 48101 Pay Rate: up to $25/hr DoE Schedule: M-F ; 645am - 330pm The Electrical Technician II will build, rework, test, repair, and install wiring harnesses on vehicles and the bench. The role will follow instructions from blueprints, bill of materials (BOM), schematics, and piping and instrumentation diagrams (P&ID). The role will follow procedures to set up and run quality checks on various wiring harnesses. The Electrical Technician II will perform independent project tasks and collaborate with customers and team members. Responsibilities include: * Follow provided work instructions (prints, cut sheets, sample harnesses) * Assembly of wiring harnesses using hand tools and proper assembly techniques * Work in small teams to complete daily build requirements * Maintain clean and organized work space * Inventory tracking of project parts and supplies * Quality validation of wire harness assemblies * Teardown and/or rework of donor harnesses * Effectively communicate with cross functional teams on collaborative projects * Provide world class products and services Qualifications: * 1+ years experience in wire harness assembly * Reliable Transportation * Detail oriented * Proficiency in Wire Prep, Crimping, Soldering, De-pinning * Ability to read and interpret wiring prints and cut sheets * Accurate measurement skills * Experienced in use of multimeter * Effective communication skills * Computer skills * Positive and enthusiastic attitude * Flexibility to cross train for expanded opportunities Preferred: * Automotive high voltage experience If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com EOE/F/M/Disability/Veterans

Job Title: Test Technician Pay Rate: $24.24 / hr ZIP Code: 93063 Job Description: The Test Technician completes work according to instructions, specifications and procedures. Conducts a variety of tests and verifications on electro and electromechanical equipment, while providing accuracy, productivity and on-time delivery. Responsibilities: * Performs a range of routine mechanical and/or electromechanical testing of small parts or components in accordance with company instructions and procedures * Reviews shop traveler route card, or schematic drawings to confirm correct sequence of operation * Perform a variety of test to verify circuitry and to test effectiveness of components in amplifiers and electronic equipment. * Receive parts or units from customers and troubleshoots circuits and components using schematic drawings and prints as a verifying check. * Perform test and diagnostics using test equipment such as oscilloscopes, DVM, signal generators, power meters, network analyzers, spectrum analyzers, power meters, frequency counters and other related test equipment * Sets up test equipment and tests per specification * Performs troubleshooting and failure analysis of analog and digital circuitry malfunctions to the micro component level * Provides detailed written failure description with root cause analysis to production and engineering * Follows written and verbal instructions, adheres to all company guidelines, policies and procedures * Maintains a safe and clean work environment, an acceptable safety record and follows company safety rules * Other responsibilities as assigned * Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job Specifications: Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 1-2 years or more of relevant experience Skills and Knowledge: * Strong electrical background with understanding of microelectronics. * Strong knowledge in testing, debugging and troubleshooting of circuits, components, instruments and mechanical assemblies * Good reading and comprehension skills to understand regulations and instructions * Ability to analyze and determine methods and procedures * Good oral and written communication skills and attention to detail * Proficient Microsoft Windows software applications Years of Experience (Required): 1-2 years 3 'Must Haves': Electro-mechanical assembly and knows how to read prints/work instructions, Has used Thermal and vibration testing equipment, Has a good foundation of how to use multi-meters and power supplies 3 'Nice to Haves': Has experience trouble-shooting PCBAs, Has a good foundation of how to read schematics, Self-starter Preferred certifications: IPC-610 certification, J-STD certification

Job Title : Quality Control Technician Pay Rate : $22.25/HR On W2 Shift : 9:00 pm (3rd shift) Responsibilities: Rest raw material and finished good properties of samples that come into QC Lab. Responsible for property testing that is reported to production and to the customer. Sample testing, i.e. viscosity, pH and density and determining adjustments Communicate adjustments and results to other departments Reduction of batch samples for spray-outs Hand spray panels for defect analysis Low-level analytical testing of intermediates Requirements: High school diploma/GED Quality Control experience with chemical or coatings manufacturing environment desired Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the seabed to outer space, you'll learn and grow, contributing to work that shapes the world. Find your future with us! Boeing Test and Evaluation (BT&E) is seeking a Instrumentation Technician C to join our teams in Seattle, WA. In this role, you will work with blueprints, schematics, technical manuals and bulletins, National Bureau of Standards, manufacturers' specifications, oral and written instructions. You will be installing instrumentation, primarily strain gauges and thermocouples on all models of Boeing aircraft civilian, military and space. Position Responsibilities: Receive work assignment from team leader or supervisor and obtain necessary materials and equipment Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work assignment Fabricate wire or fiber optic bundles used to connect various types of test and computer equipment together or test sensing equipment used to monitor and measure, for the purpose of collecting and storing data during test Set up and perform qualification test, bench test, or automatic test as required per work assignment, test document, test equipment manuals, and/or engineering instructions Install fiber optic strain gages, thermocouples, accelerometers, and strain gages by soldering, bonding, spot welding, or using mechanical fastening devices Use a scissor or boom lift to access areas for instrumentation installation this work is performed both inside hangars and outside on airfields Perform modification of test equipment to meet engineering configuration, as required Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander, as required Use shop tools and any test equipment required to complete work assignment Write tie-ins, and maintain records such as work log for areas/equipment as required Devise and/or build shop aids and work around methods as necessary to test/troubleshoot systems Handle and protect components and assemblies such as static sensitive equipment in accordance with shop procedures and drawing requirements Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Safety Data Sheets) using personal protective equipment as required Pack electronic equipment for travel as required per drawing and Boeing applicable specifications Check work after completion of each operation to be sure job is per drawing or other instructions Put completed job or reworked job up for inspection as required Contact team leader/supervisor/engineer/planner when assistance is needed (e.g. if there is questions about drawings or paperwork, if drawings and paperwork do not match, or when any other problem arises) Maintain personal and tool certifications, as required Comply with applicable tool control policies Effectively accomplishing the tasks, duties and responsibilities of this job requires at least these attributes Ability to use precision measuring tools and test equipment and interpret results Knowledge of routing, clamping, tying, connecting and terminating wires and/or wire bundles in electrical systems and assemblies, per the appropriate electrical codes Knowledge of aircraft electrical and mechanical systems Ability to calculate and apply advanced mathematics Know and interpret data from a coordinate system to identify multiple axis and dimensional references (3-D) Ability to set up and operate floor mounted hydraulic and/or mechanical operated equipment Ability to demonstrate entry level competency in operation of PIT (Power Industrial Trucks), in a safe manner as required Ability to safely operate various types of hand tools and/or hand-held power tools as required Effectively communicate information Knowledge of basic electricity and electrical systems Operate various types of test equipment, perform testing and interpret results, as required Knowledge of proper use, handling, and disposal of hazardous materials/chemicals, oils, coolants, and lubricants per government regulations and Boeing procedures Travel up to 10% of the time, both domestically and internationally. The following Physical Demands may be requirements of this job: Frequent (3-6 Hrs.) Carrying less than 10 pounds; Climbing/balancing (stairs, ladders, poles, scaffold); Finger manipulation (keyboarding, other); Flexion/Extension (head bent down, head bent back); Handling (holding, grasping); Lifting less than 10 pounds; Reaching (overhead); Rotation of head/neck; Sitting; Standing; Walking Occasional (1-3 Hrs.) Bending at the waist; Carrying 10-35 pounds; Twisting at the waist; Use of low impact vibratory tools (drilling/sanding); Lying down (back, side, front); Operating of foot controls; Pushing/pulling 10-35 pounds; Pushing/pulling less than 10 pounds; Kneeling; Lifting 10-35 pounds; Crawling; Crouching (squatting) The following Chemicals/Materials may be requirements of this job: Frequent (3-6 Hrs.) Metals (aluminum, brass, iron, Monel, nickel, steel); Plastics (acrylic, fiberglass, graphite, resins); Sealants (latex, polysulfide, silicon); Solvents (acetone, turpentine, MEK, MPK, Isopropho); Adhesives (epoxy, acrylonitrile, organic rubber) Occasional (1-3 Hrs.) Alkalis (acid neutralizers, strong detergents); Liquid Coatings (etching mask, lacquer, penetrant d); Acids (boric, muriatic, nitric, hydrochloric) The following Environmental Conditions may be requirements of this job: Continuous (6-8 Hrs.) Noise (constant or intermittent sounds or pitch) Frequent (3-6 Hrs.) Nonionizing Radiation (sub-radio frequency, radio); Elevated Platforms (wings, lifts, cranes, ladders); Extreme Heat (ovens and furnaces) Occasional (1-3 Hrs.) Atmospheric Conditions (fumes, noxious odors, dust); Confined Spaces; Welding Equipment (Arc/Cutting, Flux-Cored, Gas-Me) The following Personal Protective Equipment may be requirements of this job: Continuous (6-8 Hrs.) Face/Eye Protection (safety glasses, goggles); Fall Protection (safety belts, harnesses, lifeline); Protective Footwear (steel-toed shoes, rubber boot) Frequent (3-6 Hrs.) Protective Headwear (welding helmets, hard hats); Hand/Arm Protection (gloves, arm protectors); Hearing Protection (ear inserts, canal caps, earmuff) This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): 1+ year of experience reading and interpreting wire harness diagrams and installation schematics 1+ year of experience in electrical (wire shop) fabrication and required processes Preferred Qualifications (Desired Skills/Experience): 3+ years of strain gaging experience 3+ years of experience in Aircraft Electrical systems Certification(s) in: Electrical (Crimping, Bond and Ground); Mechanical (Fork lift, Hand truck, Pressure/vacuum); or Safety (Electrical, Egress, Explosives) Shift: This position is for 1st shift. This position may require travel up to 10% of the time, both domestically and internationally. Union: This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $27.32/hour - $57.88/hour Applications for this position will be accepted until Jan. 10, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Electromagnetic Effects (EME) is currently seeking a highly motivated Electromagnetic Effects Engineer (Entry-level or Associate) to join the team in Everett, WA. Position Overview: This position will support one of many Boeing Commercial Airplanes programs from 737 to 787 and beyond. All projects center on the translation of concepts and high-level requirements to specific architectures and operational specifications; Work with systems engineers to validate designs through analysis, laboratory and/or airplane testing; Work with aircraft systems from initial concept through certification, delivery and for continued enhancement as long as they remain in service. Specific job responsibilities may include developing requirements for such systems, developing or reviewing hardware and software designs and interface specifications, system modeling and simulation, testing and validation in the laboratory or airplane, and working with other aerospace system suppliers to ensure effective system integration and customer satisfaction. Additional assignments supporting the development of Design Practices, certification deliverables, test reports, and documents as needed. Position Responsibilities: Assists in developing and documenting requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Performs analysis to predict component performance to established requirements. Conducts tests to validate performance of designs to requirements. Collects data on supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle. Supports project management by gathering project status data. Gathers information to support development of sections of proposals to support development of new business. Provides limited direction and conducts limited oversight of entry level and developing engineers. Works with limited supervision. Work Authorization: This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA. Basic Qualifications (Required Skill/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. Preferred Qualifications (Desired Skills/Experience): 1+ years of related work experience or an equivalent combination of education and experience Experience working in a laboratory test environment Experience in commercial or military airplane maintenance and/or modification Experience or education with electromagnetic theory and advanced mathematics necessary to perform or conduct electromagnetic analysis, design, modeling and testing Experience in computational analysis Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation: This is a union represented position. Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Entry-Level (Level 1): $70,550 - $95,450 Associate (Level 2): $85,850 - $116,150 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Jan. 01, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company has an exciting opportunity, through our IAM/Boeing Joint Apprenticeship Program, for Electronic Maintenance Technician Apprentice in the Puget Sound region in Washington State! This comprehensive 5-year training program consists of 10,000 hours of paid on-the-job training and essential classroom education, designed to equip you with the skills needed to excel. The program begins with a 20% probationary period, allowing you to acclimate to the role while gaining valuable hands-on experience. You will attend school for at least 144 unpaid hours per school year (four hours each week), registered through a local Community and Technical College. Your wages as an apprentice will be defined in Article 17 of the Collective Bargaining Agreement between the International Association of Machinists District 751 and The Boeing Company, with progression to a higher wage step for every 1,000 hours of recorded on-the-job training until completion. Upon graduation, you will be placed in the target job at the maximum rate and receive a journey-worker certificate and card recognized worldwide. Apprentices in this program will develop the skills necessary to become proficient Journey-level Electronic Maintenance Technicians, specializing in Precision Machine Tool Maintenance. They will gain hands-on experience installing, diagnosing, repairing, maintaining, reworking, modifying, testing, and calibrating electronic and electrical systems associated with plant facilities, process support equipment, and production machinery. Training encompasses a broad range of technologies including analog and digital circuits, electrical and electronic test equipment, computer systems, process control systems, robotics, computer numerically controlled (CNC) equipment, motor controllers, AC circuits, and electrical safety. Emphasis is placed on mastering techniques for troubleshooting and analyzing complex electronic circuits to ensure optimal equipment performance. As an apprentice, you will learn to meticulously maintain and troubleshoot precision machine tools, utilizing precision measuring instruments and advanced test equipment to verify system accuracy. Your ability to interpret schematics and technical documentation will guide effective maintenance and repairs, while strict adherence to lockout/tagout and safety protocols ensures a safe working environment. Collaboration with operators, vendors, engineers, and cross-functional teams will be essential for gathering critical information, maintaining detailed records, and ensuring compliance with all regulatory requirements, ultimately reflecting a strong commitment to quality and operational excellence. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Application Instructions: To ensure your application is complete, all required assessments and courses must be finalized before submitting your application. Follow these guidelines: Documentation: At the time of the request, documentation for all course completions, test challenges, certificate and/or degree programs must be provided by the specified due date. Applicant Eligibility: Applicants must not have previously enrolled in or completed an IAM/Boeing Joint Apprenticeship program. Assessment and Course Completion: For English and/or math assessments, please include your assessment score and the corresponding course placement results (course number and title). Proficiency in math and English must be verified through one of the following: Completing Intermediate Algebra or a higher-level math course within the last 5 years. Completion of an English 90 course or assessment with a grade of C or better. Qualification for Blueprint Reading and Precision Measuring Tools: You can meet the qualifications through one of the following methods, which will be verified via your resume, work history, and transcripts: Vocational Courses: Basic Electronic/Electrical precision measuring tools or equivalent Basic Electricity or Basic Electronics or equivalent Vocational Degrees and Certificates: Electronic Equipment Service Technician Mechatronics Advanced Manufacturing Technology Industrial Engineering Relevant Work Experience: A minimum of one year of work experience in a similar field, such as: Aircraft Simulator Technician A & P Mechanic Broadcast Technician Communications Technician Computer Controlled Machine Controls Technician Electrical or Electronics Technician Electrician Fire Control Technician HVAC Technician Industrial Maintenance Electrician or Technician Instrumentation Technician Machine Rebuild Technician Machine Tool Maintenance Mechanic Military Electrician or Technician Postal Equipment Technician Robotics Technician Semiconductor Plant Maintenance Technician Position Responsibilities: Obtain work assignments from the Daily Dispatch List, job board, or dispatcher based on schedule and priority. Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate timely completion. Review schematics, logic ladders, blueprints, wiring diagrams, and technical specifications to understand job requirements and ensure compliance with FAA, accreditation, and regulatory standards. Diagnose malfunctions in electronic and electrical systems, communication protocols, and integrated machine tool and production systems, determining corrective actions to restore optimal operation. Install, maintain, troubleshoot, repair, and rework electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, electrostatic discharge systems, digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Utilize precision measuring instruments and advanced test equipment such as oscilloscopes, meters, laser interferometers, and ballbars to verify component accuracy and system performance. Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required. Write, edit, and develop programs and test loops to support maintenance activities, including alignments and troubleshooting equipment movement for repeatability and accuracy, using knowledge of high-level programming languages (e.g., Boolean, ladder, C+, C++). Operate and adjust equipment for troubleshooting and maintenance, including electronic control devices and sensors. Disassemble and reassemble electronic components or subsystems for inspection and repairs as needed. Install, crimp, terminate, and solder wires, modifying parts as required for proper functionality. Lock out, tag out, and try out equipment to ensure safety during maintenance activities. Conduct follow-up tests to confirm repairs have resolved issues and communicate with operators regarding machine performance. Collaborate with operators, vendors, engineers, management, equipment manufacturers, and other crafts to gather information, assist troubleshooting, and recommend improvements for facility and equipment design. Maintain accurate records of maintenance activities, equipment logs, reports on repairs, system performance, and prepare schedules as necessary. Communicate relevant information to succeeding shifts using management-approved methods. Use various mechanical lifts to access work areas safely and efficiently. Handle and dispose of hazardous materials in accordance with safety regulations and Material Safety Data Sheets (MSDS). Maintain personal certifications, licenses, and consult with supervisors or team leaders when assistance is needed or issues arise. Perform tasks associated with other job classifications when necessary to complete assignments. Ensure system configurations comply with all Federal, State, and Company regulations. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic qualifications/requirements: Experience doing jobs or tasks where you had to apply math skills such as algebra, geometry and/or trigonometry Experience reading engineering blueprints/drawings Experience with using electrical or electronic precision measuring tools and equipment such as multimeters, clamp meters, voltage testers, oscilloscopes Basic understanding Electricity/Electronics Proficiency in reading, writing, and speaking English. Education & Experience: High School Graduate or the equivalent. Proof of successful completion is required. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift Work Statement: This position is for shift 1; however, it may require some training on other shifts Other Relevant Information & Requirements: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $46.60/hour, with potential to earn up to $62.45/hour in accordance with the relevant collective bargaining agreement. Additional information Links: WebSite, Standards of Apprenticeship, Prep Pack. Applications for this position will be accepted until Jan. 08, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician-Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications. Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems. Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions. Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages. Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy. Comply with all Federal, State, and Company regulations while performing duties. Collaborate with other crafts to assist in troubleshooting outside the central control system as needed. Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency. Communicate relevant information to succeeding shifts using management-approved methods. Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems. Maintain equipment records, logs, and updates, preparing reports and schedules as required. Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion. Ensure system configurations comply with FAA and accreditation requirements. Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal). Understand electronic theory, computer and networking architecture, microprocessors, and discrete components. Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems. Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design. Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes. Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required. Perform tasks associated with other job classifications when necessary to complete assignments. Obtain and maintain applicable licenses, certificates, and certifications. Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems. Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance. 1+ years' experience troubleshooting programmable logic controllers (PLC). Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Ability to work overtime based on business requirements. Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment. Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams. Solid understanding of industrial electronic systems including HMIs, motor controls, PID loops, closed loop servo systems and electrical sensors. Experience working around 3 phase, industrial voltages 480v, 277v, 208v. Ability to work around electromagnetic fields as a result of various types of production equipment. Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $47.00 per hour - $56.97 per hour. Applications for this position will be accepted until Dec. 31, 2025 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) organization is seeking an Associate/Experienced Aeroelasticity and Dynamics Engineer to support tactical aircraft programs in Hazelwood, MO. As a member of the BDS Fixed-Wing Loads & Dynamics (L&D) Capability Team, you will be part of a core engineering team directly supporting production and development programs including F-15, F/A-18, T-7A, MQ-25, and proprietary programs. The L&D team is looking for individuals with experience in flutter, divergence, structural mode interaction (SMI) and aeroservoelasticity (ASE). Flight engineers are essential to the development, safety and success of our products and solutions. Each day, they go above and beyond to meet our customers' overall mission requirements-from initial vehicle concept definition through design, test, validation and in-service support. Your expertise in areas such as Aerodynamics; Propulsion; Guidance, Navigation & Control; and Loads & Dynamics will drive the future of aerospace. The Flight Systems Engineering Capability is an exciting organization in Boeing Defense, Space & Security responsible for performing Flight Engineering across a large portfolio of products and development programs. Product areas within the Flight Systems Capability in the St. Louis region include Fighter Aircraft, Unmanned Aircraft, and Missiles/Weapons Systems. The set of specialized capabilities and skills maintained by our teammates are the foundation of what defines the majority of our Boeing products; things that FLY! The St. Louis region is continuing to grow, and Flight Engineering is looking for motivated, talented engineers to join the Boeing team on the exciting programs located in this region. Selected candidates will work a wide range of programs that will require design, analysis and testing in Flight disciplines to meet our customers' requirements. Join our team and become a Flight Engineer with unmatched opportunity and potential; you'll be supported to develop and maintain specialized skills that may be applied across multiple product domains. You'll benefit from exposure to a variety of unique and challenging projects, and collaborate closely with other engineering disciplines and industry experts. Boeing is the world's largest aerospace company. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world. Position Responsibilities: Support the development of air vehicle requirements for aeroelasticity including flutter, divergence, freeplay and rigidity Collaborate with the airframe & subsystems design and analysis engineers to generate integrated aero and structural models for flight vehicle analysis consistent with a Model Based Engineering (MBE) environment Perform and lead analysis for flutter, divergence, aeroservoelasticity, freeplay and rigidity to support air vehicle design and stores integration Define allowable flight envelopes and operational limits Support the development of flight flutter test and ground vibration test plans Create finite element models and correlate to test results Perform ground and/or flight test programs, by the development of test requirements, providing data for pre-test analysis, monitoring testing, data analysis and documenting results, in order to support design and verification of vehicle and components Provide data to support the definition and documentation of structural design requirements for the service life of the product, to ensure company, customer and regulatory requirements are met Present engineering data and results to management and customers during program level reviews and other technical meeting Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 2 or more years' related work experience or an equivalent combination of technical education and experience Course work and/or work experience in one or more of the following technical competencies: Aerodynamics, Stability & Control, Structural Dynamics / Vibrations, Aeroelasticity, and/or Finite Element Analysis (FEA) Experience with programming languages, scripting, and data analysis Preferred Qualifications (Desired Skills/Experience): Active U.S. Security Clearance in the past 24 months Level 3: 5 or more years' related work experience or an equivalent combination of technical education and experience 2+ years of experience in flutter analysis, divergence analysis, aeroservoelastic analysis, structural dynamics, and finite element methods 2+ years of experience working with Laboratory Test, Flight Test and/or Flight Science domains 2+ years of experience with Air Vehicle Systems Strong communication skills and customer focus Experience leading teams on complex projects Experience with one or more of the following programming languages do you have? (C, C++, Fortran, Python, Matlab, etc.) Outstanding written and verbal communication skills, as well as excellent interpersonal and team skills Experience in engineering modeling and/or analysis with computer programming of analytical models, simulations, and/or data processing Engineering experience with tactical fixed wing aircraft Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 2: $76,500 - $103,500 Level 3: $95,200 - $128,800 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Engineer Technician / Draftsman Kane Innovations has been in business for over 100 years, with 3 plants in operation (1 in Erie, PA and 2 in Kane, PA) with over 120 employees. Current product offering includes security screens, detention products and architectural railing. We are currently looking for an Engineering Technician for our Kane, PA office. This position is responsible for completing drawings for customer approval based on architectural drawings and/or customer supplied documents while ensuring that drawings comply with proposal and product design standards. Essential Duties and Responsibilities: Support Engineering Department in planning and monitoring large or highly complex projects from initiation through completion. Utilizes expertise of the project lifecycle to prepare, analyze and maintain detailed project work plans and schedules using project-planning tools and Kane guidelines. Monitors project health and recommends schedule changes, cost adjustments and resource allocations to ensure optimal project performance. Using AutoCAD and standard drafting practices, create accurate conceptual drawings, structural features, and details for buildings and other construction projects. Skills: Ability To Learn And Follow Procedures Ability to Manage Complexity Planning And Organizing Problem Analysis Resourcefulness Experience and Education: One year of design/drafting experience or coursework preferred. Proficiently in AutoCAD Benefits Competitive Hourly Rate and Benefits Equal Employment Opportunity Employer Job Type: Full-time Job Type: Full-time Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible spending account * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Experience: * AutoCAD: 1 year (Required) Ability to Commute: * Kane, PA 16735 (Required) Work Location: In person

We currently have opportunities for Engineering Technologist to join our team in our Jupiter, FL office. This position is ideal for an early-career engineer looking to gain hands-on experience in the aerospace industry while working alongside experience engineers. U.S. Citizenship is required. About PSI: Parametric Solutions Inc. (PSI) is a gas turbine development firm supporting the aircraft and industrial power industries. Founded in 1993, PSI employs engineers, technicians, and staff who expertly design, analyze, procure, instrument, assemble and test gas turbine engines and components for military, commercial and industrial use. PSI Culture: PSI offers a workplace environment promoting success through individual contribution and collaborative teamwork. Our employees enjoy the ability to work on a wide range of projects, with the ability to easily change disciplines and/or job function. PSI offers annual performance evaluations, generous PTO (Paid Time Off) and flexible hours for superior work-life balance. We believe in giving back to our community through employee engagement in various charitable organizations and company-sponsored events. We offer competitive compensation and excellent benefits package including medical, dental, vision, 401K, employer-paid life and disability insurance. Job Summary: The Engineering Technologist will assist in the design, development, and testing of aerospace and turbomachinery components in support of customer programs. Essential Duties & Responsibilities: Support the engineering team in developing design sketches, layouts, schematics, 3D models, and drawings. Assist in the selection of materials and components and help identify product specifications. Support the definition of input boundary conditions (loads, pressures, temperatures, etc.) for analysis. Perform basic hand calculations or assist with finite element analysis (FEA) under the guidance of senior engineers. Help review test data and model results, identify discrepancies, and propose design improvements. Participate in team meetings to establish project objectives, timelines, and deliverables. Prepare technical documentation, reports, and presentations for internal or customer review. Support project activities to meet schedule and budget requirements. Requirements (Education & Experience): Bachelor's degree in mathematics, science, or related technical field. Will consider applicants with an Associate technical degree in Engineering or related field. 0-2 years of relevant experience (internship or co-op experience strongly preferred) Working knowledge of engineering fundamentals. Familiarity with tools such as ANSYS, NASTRAN, Fluent, CFX, etc. is a plus. Basic proficiency with CAD Modeling tools - Unigraphics, ProE, Autocad, Catia, etc. is a plus. Understanding of mechanical drawings, tolerances, materials. Microsoft Office Products - Excel, Power Point, Word, etc. Effective communication skills and teamwork in a fast-paced engineering environment. Interpersonal skills - able to work well with and motivate/teach others. Must be able to multi-task as required. Strong attention to detail and ability to follow technical direction. Location: Jupiter, FL, on-site. Equal Employment Opportunity We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sexual orientation, gender, gender identity, religion, national origin, disability status, protected veteran status or any other characteristic protect by law.

The Airframe/Engine Technician - RRT travels to the customer's location to perform on-wing inspection, troubleshooting, and repairs to engines and APUs on various corporate jets across the United States and internationally. This position interacts with customers and collaborates with Duncan team members to provide exceptional customer service and rapid response 24/7. Duncan Aviation's Rapid Response Team positions are supporting our AOG/RRT Network and typically work out of one of our Additional Fixed Base Locations or remote based on needs. These positions are not considered Entry Level positions as work is performed independently with minimal oversight. Brand new A&P's are encouraged to apply for an Airframe or Powerplant position at one of our 3 MRO locations to gain experience working on Corporate Aircraft prior to applying for the Rapid Response Team. * Applicants must have an A&P certificate * Applicants must have experience working on all/any of these engines: * Honeywell TFE731, CFE738, HTF7000 Series * Pratt & Whitney 300, 500, 600 & JT15 Series * Williams FJ44 Series * GE CF34 Series * Rolls Royce BR700 Series Essential Job Functions: * Efficiently inspects, troubleshoots, repairs, function tests, removes, reinstalls, and returns to service of aircraft engines and APUs using the proper tooling and test equipment in a safe, professional, and clean manner according to manufacturer's specifications, FAA regulations and Duncan Aviation approved procedures. Performs as an RII Inspector. * Oversees, completes and maintains accurate and timely engine and project documentation including reviewing preliminary reports to ensure accuracy of forecasted and billed labor hours; reviewing work orders and invoices, etc. to ensure timely and accurate inventory allocation, appropriate sign-off language, and accurate charges for labor and outside services are applied prior to billing. * Assists with developing and maintaining relationships with area customers, communicating with sales and marketing personnel, and monitors the Company's customer database to seek and solicit engine service opportunities. Contacts and calls on customer for engine, APU, or other service support work to meet established financial goals. Responds to customer requests and issues regarding engine and APU service work. * Manages all aspects of assigned engine projects to ensure safety, quality, and efficiency throughout the projects. Accepts full ownership of assigned projects from pre-planning to delivery of the engine through planning, prioritizing, and communicating with customers, Company personnel, OEM's, outside contractors and vendors, as necessary. Ensures the safety and security of customer's equipment during all maintenance phases. * Assists with managing and maintaining adequate and appropriate parts inventory certification, calibration of assigned tooling, working condition and cleanliness of support vehicles. * Be available to provide a continuation of service and be a point of contact for internal or external customers before or after scheduled hours of work. * Performs other duties as assigned by management. Education and Experience: * High School Diploma/GED or equivalent is required * Must be a fully licensed A&P in good standing with the FAA * Must have a minimum of four years of Corporate Aviation Maintenance focusing on engine/airframe maintenance experience * Must have previous Lead Technician or AOG maintenance experience with a Corporate Flight Department, Business Jet Service Provider, MRO or OEM. Job Specific Requirements: * Licenses/Certificates: Airframe & Powerplant Certificate required; RII Designation eligible. Must have a valid Driver's License and an acceptable driving record * Tools/Equipment: Duncan Aviation does require technicians to have their own basic tools to perform essential functions of the job. Duncan Aviation will provide tool lists for each position to qualifying candidates * Attendance: Regularly scheduled attendance required; multiple overnight and short notice travel * Physical: Routinely lifts up to 50 lbs.; occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with component maintenance; tolerates working in confined spaces and heights above four feet; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting * Environmental: Tolerates working in extreme temperatures and in noisy environments Available Benefits * Moving is expensive and hard work! Relocation Assistance is available for those that qualify. * Geographic Differential for Rapid Response Teams based on location * Rapid Response Team Members receive a Company Phone, Laptop & Vehicle to use for work trips * Duncan Aviation offers Tool Account Programs for technicians who need to purchase additional tools for their work. * Duncan offers a comprehensive Benefits Package (Medical, Dental, Vision, Vacation/Holiday) that is available to team members on day one. * Plan for your medical needs with a Health Savings Account (employer and employee contributions). * Save for your future through our 401(k) program where you can begin contributions within your first 45 days, 50% match on first 6% contributed * Take advantage of a variety of In-House Training opportunities, or use Tuition Assistance to further your education. Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled

Engineer Technician / Draftsman Kane Innovations, has been in business for over 100 years, with 3 plants in operation (1 in Erie, PA and 2 in Kane, PA) with over 120 employees. Current product offering includes security screens, detention products and architectural railing. We are currently looking for an Engineering Technician for our Kane, PA office. This position is responsible for completing drawings for customer approval based on architectural drawings and/or customer supplied documents while ensuring that drawings comply with proposal and product design standards. Essential Duties and Responsibilities: Support Engineering Department in planning and monitoring large or highly complex projects from initiation through completion. Utilizes expertise of the project lifecycle to prepare, analyze and maintain detailed project work plans and schedules using project-planning tools and Kane guidelines. Monitors project health and recommends schedule changes, cost adjustments and resource allocations to ensure optimal project performance. Using AutoCAD and standard drafting practices, create accurate conceptual drawings, structural features, and details for buildings and other construction projects. Skills: Ability To Learn And Follow Procedures Ability to Manage Complexity Planning And Organizing Problem Analysis Resourcefulness Experience and Education: One year of design/drafting experience or coursework preferred. Proficiently in AutoCAD Benefits Competitive Hourly Rate and Benefits Equal Employment Opportunity Employer Job Type: Full-time Job Type: Full-time Pay: $23.27 - $28.03 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Flexible spending account * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Experience: * AutoCAD: 1 year (Required) Ability to Commute: * Kane, PA 16735 (Required) Work Location: In person

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries. With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. PAG supports operators in the Airline, Business and General Aviation (BGA), Military and Rotary Wing markets through its Inventory Supported Maintenance, Repair, and Overhaul (ISMRO ) business model. JOB PURPOSE The Engine Technician will effectively provide maintenance, repair and overhaul services to PT6A engine series. This includes, but is not limited to, disassemble, clean, evaluate, repair and assemble turbine engines. Experience is a plus but not a requirement. JOB DUTIES AND RESPONSIBILITIES Essential function includes: Maintain, repair and overhaul service to PT6A & PT6T engines Read and interpret maintenance and overhaul manuals. Replace or repair worn, defective or damaged components Disassembly, clean, evaluate, repair and assemble turbine engines Ideal candidates offer: 3 years' experience in aviation maintenance environment, preferably on PT6A/PT6T series A&P License preferred but not required Pratt Whitney turbine engine experience a plus Computer skills including electronic mail, Microsoft word and Excel Ability to read and comprehend written and oral instructions in English A valid clear driver's license Must have own hand tools. Special tooling will be supplied by company Department of Homeland Security proof of employment eligibility verification Physical requirements: work in confined workspace, manual dexterity to work with and on small tools and component parts, routinely bend and must be able to lift up to 40 pounds. We offer competitive pay and a wide variety of benefits. Full time associates qualify for health benefits the first of the month following 30 days' employment. Options include 4 medical plans, 2 dental plans, vision, base life (company paid), voluntary life, short and long-term disability, flex spending accounts, and telemedicine. Other benefits include vacation and PTO time accrued with each pay cycle with a vacation carryover/payout option at year end, 9 paid holidays, 401k with company match contributions. Qualified candidates with strong drive, work ethic and commitment to quality are invited to apply at www.precisionaviationgroup.com. EOE/Vets/Disabled

Why Great Northern Established in 1962, Great Northern is a local, privately owned paper-based packaging manufacturer with a long history of providing secure, stable, and meaningful positions. You will experience a collaborative team-first, safe, clean, enjoyable, and predictable workplace where team members support and care for one another. Our team members produce sustainable and Eco-friendly products that are supplied to national brands that impact people's day-to-day lives. Great Northern is committed to making a difference in the lives of our team members, customers, and the communities in which we live and work. Many of our team members were referred by their friends and families who are already a part of the Great Northern team. We are currently looking for a full-time Electromechanical Technician for our Allentown, PA plant. POSITION SUMMARY Responsible for electro-mechanical repairs, maintenance and preventative maintenance to all production and facility equipment in addition to installation of said equipment in the plant, warehouse, and office areas by performing the following duties. Electro-mechanical skill set is required. ESSENTIAL DUTIES AND RESPONSIBILITIES INCLUDE THE FOLLOWING. OTHER DUTIES MAY BE ASSIGNED. Ensure the operational viability of the plant by evaluating and maintaining the proper functioning of all electrical, instrumentation, and control systems. Involvement with process instrumentation and automation equipment specifying and selecting control equipment to maximize automation efforts. Maintain proper documentation of electrical, instrumentation and automation systems and keep files up to date including process instrumentation diagrams, block diagrams, and drawings. Hands on experience with PLC/DCS and HMI architecture to aid in troubleshooting Performs ladder logic programming and troubleshooting for PLC's. Knowledge of AC/DC circuits, motors and drives. Determines the existence of electrical hazards and problems. Safely isolate, ground, and prepare circuits for electrical apparatus for repairs. Perform preventative maintenance such as changing contacts, checking motors, and the operation of automated and robotic systems. Adheres and actively participate in lock out/tag out practices and procedures. Keeps all documentation up to date of lock out/tag out and works with Safety Director to maintain safe practices. Assists Operations Manager, supervisors, and maintenance lead with the operation of the predictive and preventative maintenance program. Inspects and ensures that all operating machines and equipment conform to electrical and mechanical operational quality standards. Requisitions tools, electrical test equipment and maintenance supplies required for plant operation. Confers with plant manager, production manager, supervisors, and other appropriate personnel to resolve maintenance problems and recommends measures to improve operations and conditions of machines, equipment and processes. Keeps maintenance area neat, clean and orderly; cleans up after completing maintenance work throughout the plant. Records and files complete machine histories relating to maintenance problems and cures, troubleshooting methods, services required, spare parts and parts vendors. Regular and reliable attendance. ADDITIONAL RESPONSIBILITIES Knows, understands and follows all plant safety rules, general rules and procedures. Remains current on changes in policies, procedures, and product information, attending authorized training programs and seminars. Be available for monthly safety meetings, on-call and overtime work. Annual, semi- annual, quarterly, monthly, weekly & daily Inspections. Manage & distribute Maintenance PO numbers. Misc. Duties as assigned Opportunities for Growth You will have the opportunity to learn new skills and acquire new knowledge that can be applied to grow into new positions with higher pay. Salary Dependent on prior experience, starting wage between $35.00/hour to $37.00/hour. Expectation To be successful your teammates will depend on you to have pride in your work, be on time, work safely, work effectively with others, be optimistic, take ownership of your responsibilities, and look for continuous improvement opportunities.

The Airframe/Engine Technician - RRT travels to the customer's location to perform on-wing inspection, troubleshooting, and repairs to engines and APUs on various corporate jets across the United States and internationally. This position interacts with customers and collaborates with Duncan team members to provide exceptional customer service and rapid response 24/7. Duncan Aviation's Rapid Response Team positions are supporting our AOG/RRT Network and typically work out of one of our Additional Fixed Base Locations or remote based on needs. These positions are not considered Entry Level positions as work is performed independently with minimal oversight. Brand new A&P's are encouraged to apply for an Airframe or Powerplant position at one of our 3 MRO locations to gain experience working on Corporate Aircraft prior to applying for the Rapid Response Team. * Applicants must have an A&P certificate * Applicants must have experience working on all/any of these engines: * Honeywell TFE731, CFE738, HTF7000 Series * Pratt & Whitney 300, 500, 600 & JT15 Series * Williams FJ44 Series * GE CF34 Series * Rolls Royce BR700 Series Essential Job Functions: * Efficiently inspects, troubleshoots, repairs, function tests, removes, reinstalls, and returns to service of aircraft engines and APUs using the proper tooling and test equipment in a safe, professional, and clean manner according to manufacturer's specifications, FAA regulations and Duncan Aviation approved procedures. Performs as an RII Inspector. * Oversees, completes and maintains accurate and timely engine and project documentation including reviewing preliminary reports to ensure accuracy of forecasted and billed labor hours; reviewing work orders and invoices, etc. to ensure timely and accurate inventory allocation, appropriate sign-off language, and accurate charges for labor and outside services are applied prior to billing. * Assists with developing and maintaining relationships with area customers, communicating with sales and marketing personnel, and monitors the Company's customer database to seek and solicit engine service opportunities. Contacts and calls on customer for engine, APU, or other service support work to meet established financial goals. Responds to customer requests and issues regarding engine and APU service work. * Manages all aspects of assigned engine projects to ensure safety, quality, and efficiency throughout the projects. Accepts full ownership of assigned projects from pre-planning to delivery of the engine through planning, prioritizing, and communicating with customers, Company personnel, OEM's, outside contractors and vendors, as necessary. Ensures the safety and security of customer's equipment during all maintenance phases. * Assists with managing and maintaining adequate and appropriate parts inventory certification, calibration of assigned tooling, working condition and cleanliness of support vehicles. * Be available to provide a continuation of service and be a point of contact for internal or external customers before or after scheduled hours of work. * Performs other duties as assigned by management. Education and Experience: * High School Diploma/GED or equivalent is required * Must be a fully licensed A&P in good standing with the FAA * Must have a minimum of four years of Corporate Aviation Maintenance focusing on engine/airframe maintenance experience * Must have previous Lead Technician or AOG maintenance experience with a Corporate Flight Department, Business Jet Service Provider, MRO or OEM. Job Specific Requirements: * Licenses/Certificates: Airframe & Powerplant Certificate required; RII Designation eligible. Must have a valid Driver's License and an acceptable driving record * Tools/Equipment: Duncan Aviation does require technicians to have their own basic tools to perform essential functions of the job. Duncan Aviation will provide tool lists for each position to qualifying candidates * Attendance: Regularly scheduled attendance required; multiple overnight and short notice travel * Physical: Routinely lifts up to 50 lbs.; occasionally up to 100 lbs.; reads small print; hears sounds associated with mechanical deficiencies; repetitive motion; works with moving parts and vibration; tolerates products, materials and fumes associated with component maintenance; tolerates working in confined spaces and heights above four feet; tolerates standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and sitting * Environmental: Tolerates working in extreme temperatures and in noisy environments Available Benefits * Moving is expensive and hard work! Relocation Assistance is available for those that qualify. * Geographic Differential for Rapid Response Teams based on location * Rapid Response Team Members receive a Company Phone, Laptop & Vehicle to use for work trips * Duncan Aviation offers Tool Account Programs for technicians who need to purchase additional tools for their work. * Duncan offers a comprehensive Benefits Package (Medical, Dental, Vision, Vacation/Holiday) that is available to team members on day one. * Plan for your medical needs with a Health Savings Account (employer and employee contributions). * Save for your future through our 401(k) program where you can begin contributions within your first 45 days, 50% match on first 6% contributed * Take advantage of a variety of In-House Training opportunities, or use Tuition Assistance to further your education. Duncan Aviation is an Equal Opportunity and Affirmative Action Employer. EOE Minorities/Females/Protected Veterans/Disabled