Bell Incorporated jobs in Sioux Falls, SD - 13969 jobs

As a Construction Site Safety Representative with The Bell Company, you must have a desire for a career in analyzing, implementing, and documenting all aspects of a construction company's safety plan. Candidates must meet the following requirements to be considered: Possesses a current certification in First Aid, CPR, and AED: AND Possesses an OSHA 30 card that was issued within 3 years; AND An academic degree in Safety, CSP, ASP or CHST; or has a minimum of 3 years or prior work history as a designated construction safety manager. Job Specific Requirements: Implement any site-specific safety programs Develop and review work plans Coordinate Job site hazard analysis program Conduct and document all Safety inspections Conduct and document all project safety training Review and finalize all safety submittals Interaction with Subcontractors and the Owner's Representatives. At the Bell Company we believe in rewarding members of our teams with more than just a competitive rate. We also offer: Being part of an EMPLOYEE-OWNED COMPANY with the company contributing stock in the value of 3% to 6% of your gross (ESOP program) as well as an annual bonus program for all employees. Both programs are subject to vesting and/or company performance. Discretionary annual bonus program based on Company performance. Ongoing professional training and development Opportunities for advancement Employer paid $50,000 life insurance. Elective medical with 75% employer contribution, dental and supplemental benefits are available immediately. 401 (k) program with 3% employer grant Paid vacation Paid holidays The Bell Company is an Equal Employment Opportunity Employer. Minorities, Disabled and Veterans are encouraged to apply. Our focus marketplace is the Heavy Construction Industry (Mechanical Piping) and PLUMBING If you have experience in the following disciplines, we want to hear from you!

Assistant Superintendent (Commercial Construction Only) Employment Type: Full-Time Travel: Local travel to job sites required About the Role We are seeking a highly capable Assistant Superintendent to join our commercial construction team in Walterboro, SC. This role is critical to ensuring the successful execution of projects on-site and maintaining high standards of quality, safety, and efficiency. Key Responsibilities Assist in managing daily operations on commercial construction job sites. Coordinate subcontractors, materials, and schedules to ensure timely project delivery. Enforce safety protocols and ensure compliance with building codes and regulations. Monitor progress and report updates to the Superintendent and Project Manager. Resolve on-site issues quickly and effectively to maintain project momentum. Maintain accurate documentation and logs related to site activities. Required Qualifications Minimum of 3 years of commercial construction experience. This is non-negotiable. Strong understanding of construction processes, safety standards, and site coordination. Ability to work independently and take initiative. Excellent communication and organizational skills. Willingness to travel locally to job sites as needed. Ideal Candidate Based in or near Walterboro, SC. A proactive problem-solver who thrives in a fast-paced environment. Detail-oriented and committed to excellence. Comfortable working with minimal supervision and managing multiple tasks.

American Direct Logistics ******************************** is a National Final Mile Delivery and Assembly company. We are currently looking for Independent Contractors with the ability to deliver and install RTA furniture and fitness equipment. We have immediate openings in your geographical area. If you currently provide these services, this is an excellent opportunity to add additional revenue to your weekly earnings. The Opportunity: IC is to deliver and install RTA furniture & fitness equipment in customers' home. Supplemental income (no routed work) Flexibility to schedule jobs based upon your schedule. Growth opportunity Responsibilities: Contact customer to schedule delivery/installation appointment. Picking up freight from your local warehouse Delivering and assembling product to our customers' homes Provide trash removal from installation site Job Requirements: Cargo van, sprinter van, box truck (up to 16') Delivery & Assembly experience required (minimum 2 years) 2 man team (IC's must have their own helper, we do not hire helpers) Valid driver's license, vehicle registration and vehicle insurance Excellent communication skills (must speak fluent English) Smart phone Able to pass a background check Earnings Potential- $500-$1500 Weekly Direct Deposit Flexible Schedule Third Party Insurance Provider Available (commercial auto, general liability, cargo) We will send you our introductory email that will get you started with our hiring process once you submit your application.

About Architectural Resources is an independent agency representing top tier exterior building product manufacturers in the commercial building sector. Our growing company is searching for experienced candidates for the full-time position of architectural sales representative. The architectural sales representative will promote the company and its products to architects, specifiers, designers, engineers, contractors and owners in the Los Angeles, Orange, Riverside & San Bernardino markets. Responsibilities · On the road position, meeting with customers 3-4 days per week. · Project tracking & follow up. · Architectural meetings & presentations. · Contractor meetings. · Job site visits. · Working in a fast-paced environment demanding strong organizational, technical, and problem-solving skills. · Plan review for bid opportunities. · Collaboration with manufacturers to bid opportunities. · Generation of small types and quantities quotes. · Order write ups to manufacturers for new orders. · Project management: Work with manufacturers and contractors to ensure submittal deliverables are on schedule. · Data entry in CRM. Qualifications: · Minimum of 1-year architectural sales experience. · Technical sales background. · Excellent oral and written communication skills. · Strong work ethic. · Service oriented mentality. Compensation in addition to Base Salary + Commission: · Vehicular Mileage reimbursement. · Cell Phone · Monthly Internet Stipend · Health insurance where the company pays a portion. · Paid Holidays & Vacation Time. · Sick leave.

Morrow-Meadows Corporation is accepting applications for a full-time Senior Estimator for its Electrical Division in Poway, CA. Responsibilities: Collaborate with team members on selections of projects to pursue Interface and communicate with clients on bids Build strong relationships with customers and at times attend and coordinate social functions Work closely with the Business Development Manager and frequently visit clients and assist with business promotions Support our preconstruction team as necessary in pursuit of their opportunities Review contracts on potential new jobs won and assure the contracts include our exclusions and clarifications and reflect our bid scope See that estimating documents are properly filed and organized at all times Use technology to assure we are estimating at maximum efficiency and accuracy Train and mentor junior estimating staff as necessary Assist with negotiating prices and purchases as necessary Organize and lead kick off and hand off meeting on projects that are won Work closely with operations on large bids and collaborate to ensure bids are complete and reflect our resource availability Ability to commute to Morrow-Meadows Corporation project sites for Estimating support Consult with clients, vendors, personnel in other departments to discuss and formulate estimates and resolve issues Analyze electrical, mechanical, architectural drawings and other documents to prepare time, cost, materials and labor estimates Prepare and submit bid RFI's and maintain log Identify qualified suppliers/subcontractors and solicit quotes Review quotes for completeness with plans & specs Prepare and maintain bid folder Prepare new construction and remodel electrical estimates using ACCUBID Estimating system Attend job walks and pre-bid meetings Provide electrical budgets and rough order magnitudes as requested Provide value engineering and cost alternatives as necessary Thoroughly read project specifications and general conditions Meet with clients to discuss and review estimates Interface and work closely with Morrow-Meadows Corporation Subcontractors and Vendors Support and attend business development functions after normal work hours Build and maintain lasting relationships with our customers Prepare detailed proposals as required by our customers when necessary Requirements: Minimum 10 years' experience in the electrical construction industry Previous estimating experience required including projects up to $15 million in electrical value Strong electrical knowledge in commercial construction including low voltage systems Proficient in Microsoft Office and Estimating Systems (ACCUBID Preferred) Customer focused Strong leadership and managerial skills Team oriented and able to work well with others Detail oriented and organized Strong communications skills Ability to juggle multiple tasks at the same time Ability to work with tight schedules/deadlines Ability to work late when necessary Engineering familiarity preferred Familiarity with the electric code Benefits: Competitive compensation packages Medical and Dental Benefits Basic Life Insurance Long Term Disability Insurance Flexible Spending Account Wellness Program 401-K Plan that matches up to $6,000 per employee annually 8 paid holidays Your birthday as a paid holiday 3-4 weeks paid vacation/personal time off depending on years of employment Morrow-Meadows Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. The salary range for this position is: $130,000.00- $185,000.00 Compensation offered may vary based on work location, experience, qualifications, specialty, training, and market and business considerations, among other factors.

Gray Construction is looking to add a Japanese Speaking Project Engineer - Food and Beverage to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Visa Sponsorship: This role is not eligible for visa sponsorship. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Join a Team That's Building More Than Projects - We're Building Futures! Join Erickson-Hall Construction Co., a National and Multi-Regional Top Workplace for five consecutive years. We're 100% Employee-Owned - building success through teamwork, innovation, and construction done right by people who care. This position is based in Anaheim, CA. The Director of Business Development (Higher Education) supports Erickson-Hall Construction Co. by driving strategic growth and organizational sustainability through the development and implementation of mission-aligned initiatives. This position plays a central role in translating vision into action by identifying opportunities, building strong relationships and partnerships, and leading the development of high-impact projects that benefit the communities around them. Essential Duties: Leverage, develop and build on current and/or new relationships with higher education institutions. Expand and cultivate a pipeline of growth projects in the higher-education vertical in partnership with the VP of Business Development. Increase our company's visibility and presence amongst key stakeholders through attending and participating in conferences, associations, and other higher-education events. Demonstrate an understanding of higher education facility construction needs, capital plans, campus priorities, and funding methodology. Strategically evaluate potential projects by analyzing project requirements weighed against potential risk and potential profit. Track emerging trends, funding landscapes, and partnership prospects. Other duties as assigned. Knowledge, Skills and Abilities: 7 years of progressive business development and client relationship management experience in the construction market. Ability to represent Erickson-Hall Construction Co. and its services, including conducting presentations and speaking publicly on behalf of the organization. Proven ability to secure construction projects and achieve/exceed revenue goals. Comfortable approaching clients with sales conversations; able to handle impromptu client conversations and unique requests professionally and confidently. Ability to read and interpret construction plans and technical specifications. Adept at working collaboratively with different departments on applicable pursuits (Marketing, Estimating, Pre-con, and Operations). Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Ability to travel (local travel within Southern CA 50%, outside CA 10%) as needed. Have full range of mobility in upper and lower body. Be able to work in various positions, including but not limited to stooping, standing, bending, sitting, kneeling, and squatting for long periods of time. Ability to lift, push, and pull up to 25 pounds occasionally and as needed. While performing the duties of this position, an employee is regularly required to work indoors, but may be subjected to noise that regularly occurs at a construction site. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Be able to use hands to finger, handle, feel or operate objects, office materials or controls and reach with hands and arms. Benefits Employee Stock Ownership Plan (ESOP) Profit-Sharing 100% employer-paid Health/Dental premiums for team members Generous Vacation and Sick Time off Nine (9) Paid Holidays - Including your Birthday! 100% employer-paid Life, AD&D, and Long Term Disability insurance Retirement plans with company contribution Subsidized tuition on Child Care Health/Dependent care FSA's Making a difference in the communities you serve Acknowledgments Erickson-Hall Construction Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any of the following, whether actual or perceived or based upon identification or association: race, color, religious creed, national origin, ancestry, age, medical condition, pregnancy or childbirth (and related medical conditions), physical or mental disability, genetic information, sex, gender (including gender identity and gender expression), sexual orientation, marital status, registered domestic partner status, military status, veteran status, political activity or affiliation or any other basis protected by law.

Senior Project Drafter Would you like to be part of a family who loves to take on exciting challenges? Metromont LLC has been one of the leaders in the construction industry for nearly a century and is currently accepting resumes to be part of our dynamic team! Metromont was founded in 1925 on the principles of faith, honor, and passion, and almost 100 years later, those values are still the foundation of who we are and everything we do. A third-generation company with nearly 1,500 associates across six manufacturing facilities in South Carolina, Georgia, Florida, and Virginia, Metromont is a leader and pioneer in the engineering and manufacturing of precast concrete. Most of all, we're a trusted partner, working side-by-side with our customers from the earliest stages of project design through turnover of the completed structure. In addition to the production of precast concrete, Metromont provides our customers with complementary design and engineering, hauling, erection, and field services to support their full construction needs. Across the eastern seaboard, the southeast, and even as far west as Arizona, our customers rely on us to provide innovative precast solutions and the best quality for their parking structures, data centers, multifamily housing, office buildings, warehouses, schools, and stadiums. And we do, because a trusted partner is who we are - and who we've been for nearly a century. Senior Project Drafter JOB DATA Department Code: 817X Account Code: 702500 Department Name: Drafting Account Name: Clerical Tech/Non-Exempt POSITION PURPOSE The Senior Project Drafter designs and prepares complete and accurate erection drawings, shop tickets, material requisitions and revisions for complex projects, integrating skilled architectural/engineering drafting methods, and procedures with the operation and application of computer-aided design (CAD) equipment and software. RESPONSIBILITIES Provides leadership and direction to project drafters Design and prepare electronic (CAD) erection drawings, shop tickets, and material requisitions from contract drawings and engineering calculations Interface with departmental personnel to obtain details of equipment and materials requirements Prepare plans, elevations, sections, and material requirements from sketches, specifications, contract drawings and responses to requests for information provided by architects, engineers, general contractors, subcontractors, and Metromont's internal project management team Consult with engineers and project managers as needed to resolve questions Revise computer-aided designs and documents to comply with comments and changes to project scope Provide technical guidance to the Project Drafter regarding coordination of details between shop tickets and erection drawings Coordinates drafting work with engineers and architects Serves as a lead in providing direction to drafters SCOPE OF AUTHORITY Assists in supervising 8-10 Project Drafters Reviews work of Project Drafters Report to Drafting Manager CHARACTERISTICS (Knowledge, Skills, and Abilities) Able to read blueprints and drawings Able to create detailed electronic (CAD) working plans from data Able to make basic computations for strength and other features as required Follow pre-established guidelines Follow established technical specifications to prepare drawings Clear and effective written and verbal communication skills EDUCATION AND TECHNOLOGY Associate Degree in Design, Architecture, or related field with coursework in computer-aided design (CAD) Knowledge of Revit preferred Minimum two (2) years drafting experience WORK ENVIRONMENT / SCHEDULE Typically works in an office environment Typically works inside in an open (cubicle) office environment Monday - Friday, 8am - 5pm; schedule flexibility may be required to meet deadlines TRAINING AND DEVELOPMENT General HR Orientation Revit Training PHYSICAL REQUIREMENTS This is an office position which requires sitting, standing, and walking. Disclaimer: This job description is not intended to be all-inclusive. Other duties as assigned may be required. All associates are expected to conduct themselves in a manner that is consistent with Metromont's core values and to actively participate in all company safety, training, and observation programs. Metromont LLC (Company) is an equal opportunity employer. The Company is committed to the spirit and letter of all federal, state and local laws and regulations pertaining to equal opportunity. To this end, the Company does not discriminate against any individual with regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy (including medical needs due to pregnancy, child birth or other medical conditions), national origin, age, disability, genetic information, veteran status, or other protected status. This Policy extends to all terms, conditions and privileges of employment, as well as the use of all Company facilities. The Company is also committed to making reasonable accommodations based on an individual's disability, religion, pregnancy, childbirth and related medical conditions (including, but not limited to, lactation), or any other protected status where a reasonable accommodation is required under the law. No form of unlawful discrimination, unlawful harassment, unlawful refusal to reasonably accommodate or unlawful retaliation will be tolerated. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Job Details Pay Type Hourly PIeaeea97fc5-

Redwood Electric Group is looking for a detail-oriented and technically skilled Electrical PV Designer to support our project teams in the design and drafting of photovoltaic and energy storage systems. This role plays a critical part in ensuring the accuracy, efficiency, and code compliance of our electrical designs while collaborating closely with engineers, project managers, and construction teams. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities Develop electrical single-line diagrams for AC and DC PV systems. Design PV array layouts, considering site conditions, shading, and component options. Perform electrical calculations, including voltage drop, conductor sizing, and inverter loading. Select appropriate PV modules, inverters, combiners boxes, and other system components. Create detailed electrical drawings, including site plans, equipment layouts, and installation details. Ensure compliance with the California Electrical Code (CEC) and other relevant codes and standards. Utilize PV design and Autodesk software and to create accurate and efficient designs. Coordinate with structural engineers on mounting system design and integration. Collaborate with engineers, project managers, and construction teams to integrate electrical designs into overall project plans. Provide technical support during the installation and commissioning phases of PV projects. Stay up-to-date with the latest advancements in PV technology and industry best practices. Required Skills/Abilities Proficiency in AutoCAD, Helioscope, & PVsyst for electrical distribution and PV system layout. Familiarity with California Electrical Code and other relevant codes and standards. Strong problem-solving skills with an analytical approach to electrical system design. Knowledge of PV system components and distribution equipment. Ability to manage multiple projects and deadlines in a dynamic team environment. Effective verbal and written communication skills to collaborate across teams. Contribute to a team environment where your input is valued. Education and Experience Bachelor's degree in Electrical Engineering or a related field (preferred), or equivalent relevant experience. 1-2 years of experience of electrical design for a design-build electrical contractor or engineering firm. Proficiency in AutoCAD MEP. Revit is appreciated. Basic knowledge of Microsoft Office applications. Strong time management, communication, and interpersonal skills. FE (EIT certification) appreciated. LEED project experience appreciated. Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Suffolk is a national enterprise that builds, innovates, and invests. We provide value across the entire project lifecycle through our core construction management services and complementary business lines in real estate investment, design, self-perform construction, and technology start-up investment (Suffolk Technologies). By integrating data, artificial intelligence, and advanced technology through our Seamless Platform, we connect design, construction, and operations to deliver smarter, more predictable results and redefine how America builds. Suffolk - America's Contractor - is a national company with more than $8 billion in annual revenue, 3,000 employees, and 17 offices, including Boston (headquarters), New York City, Miami, West Palm Beach, Tampa, Estero, Dallas, Los Angeles, San Francisco, San Diego, Las Vegas, Herndon, U.S. Virgin Islands, and other key markets. Suffolk manages some of the most complex and transformative projects in the country, serving clients across healthcare, life sciences, education, gaming, aviation, transportation, government, mission critical, and commercial sectors. Suffolk is privately held and is led by founder, chairman and CEO John Fish. Suffolk is ranked #8 on ENR's list of “Top CM-at-Risk Contractors.” For more information, visit *************** and follow Suffolk on Facebook, Twitter, LinkedIn, YouTube, and Instagram. Position: Suffolk is currently seeking an Energy Marshall to implement learning, provide consistency, and drive rigor into energy isolation and electrical safety programs. Responsibilities: Reviewing the Electrical Energization Safety Program with the electrical contractor and commissioning authority Involvement with all stored energy systems - gas, water, steam, air. Organizing and scheduling Pre-Energization meetings Confirming individuals working on energized / de-energized equipment are Qualified Work based on NFPA 70E, OSHA, or an accepted qualified electrical safety training standard. Delivering a project specific Electrical Safety Orientation to employees who will be working on energized or de-energized equipment Reviewing the electrician's LOTO plan and verifying it is accurate and managed properly. Reviewing electrician and vendor AHA's. Confirming receipt of the approved coordination study and all arc flash labels have been applied to the equipment. Tracking and confirming all required QA/QC is complete and documentation has been submitted. Reviewing the daily Pre-Task Plan for energization activities. Implementing adequate communication to the project team that identifies daily high-risk activities, energized equipment and spaces, barriers, and off-limit spaces. Confirming all pre-energization steps have been completed. Conducting pre-energization daily walks with the electrician and project stakeholders. Performing end-of-day walks for electrical equipment to confirm all systems are secure. Confirming adherence to the LOTO plan and isolation requirements. Confirming adequate signage and barriers are installed for electrical rooms and spaces with energized equipment. Confirming an adequate access control plan is in place for electrical rooms and spaces with energized equipment. Qualifications: BA/BS + 5 years of related experience or demonstrated equivalency of experience and/or education Able to understand the safe installation of electrical equipment and various voltages, equipment types, and AC/DC systems Knowledge of pressurized mechanical lines, compressed gas and air. Experience in construction and electrical commissioning standards and practices. Experience communicating complex technical solutions and concepts to engineers and non-engineers. Ensure audit site practices against written standards as part of assurance role. Ability to Interpret line drawings and system redundancies to ensure design of LOTO systems are 100% effective and in compliance with customer standards. While performing the duties of this job, the employee is regularly required to sit for long periods of time; talk or hear; perform fine motor, hand and finger skills in the use of a keyboard, telephone, or writing. The employee is frequently required to stand; walk; and reach with arms and/or hands. Specific vision abilities include close vision, distance vision, depth perception and the ability to adjust focus. The employee will spend their time in an office environment with a quiet to moderate noise level. Job site walking. Suffolk provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, pregnancy or maternity, national origin, citizenship, genetic information, disability, protected veteran, gender identity, age or any other status protected by law. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment. Suffolk will not tolerate any unlawful discrimination toward, or harassment of, applicants or employees by anyone at Suffolk, or anyone working on behalf of Suffolk.

IS FOR LOCAL WORKFORCE IN THE COLUMBUS, OHIO AREA AND DOES NOT PAY PER DIEM. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year, having no signs of slowing down. Our company grew through challenging and interesting opportunities that placed us in ENR's (Engineering News-Record) top 50 electrical contractors nationwide! Join Ace Electric for a chance to work with a highly supportive and proficient team, as well as build your career with Ace University! We value the hard work of our employees, always striving to enhance skills and a positive employee workplace. Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Foreman will support the Superintendent or Project Manager in the oversight of the operations and field personnel responsible for the installation, additions, and/or repairs of electrical systems, conductors, and associated materials/equipment for the assigned job. The Foreman functions as a crew leader or team lead on Job Project tasks or on smaller jobs. Preferred Job Skills: Strong commercial and industrial electrical background. Bilingual in Spanish and English, preferred. Strong troubleshooting skills utilizing sophisticated test equipment (DMM, Megger, PQM, UCT, IR Camera, etc.). Strong knowledge of the National Electric Code (NEC). Ability to safely operate and maintain a specialized electrical service vehicle. Able to maintain professional appearance and conduct at all times. Able to demonstrate necessary computer and keyboard skills. OSHA 30 Hour, CPR, and First Aid trained. Ability to manage customer and company specific information and documentation in an organized manner. Able to maintain high levels of productivity, meeting deadlines while maintaining accuracy. Must be an effective and professional communicator, both written and verbally. Able to be on twenty-four hour call on a rotating basis, as needed. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: Responsible for leading and directing all field personnel involved in the assigned project or task. Responsible for the planning of the project or task in the most efficient and profitable manner. Ensure all materials are ordered and received in a timely manner to ensure compliance. Necessary to have and maintain certain personal tools as directed by leadership. Will read and comply with all guidelines provided in the Employee Handbook, Safety Manual, or Policy and Procedure Manual, and will require any field employees under their leadership to do the same. All other duties as assigned. Position Requirements: License: Valid state driver's license. Certification: OSHA 30, CPR preferred. Education: High School Graduate/GED required. Experience: Minimum of 6 years electrical experience preferred. Working Conditions: Job requires working in all elements, depending on job location, time of year, heat, cold, rain, or snow. Job requires employee to have required personal tools with him at all times (waist tool belt as worn weighs approximately 30 lbs.). Work from all types of ladders and be able to transport/relocate ladders unassisted. Employee's personal weight with tools cannot exceed the rated weight capacity of ladders used. Perform work at various heights, up to 90 feet from ladders, scaffolds, aerial lifts, cat walks and other safe work areas. Work in restricted areas (switch gear-room, manholes, utility tunnels and crawl spaces). Wear personal protective equipment as required. Able to work 40 hours per week plus overtime as required, to include night shifts. Required Physical/Mental Functions: Positively identify colors of wire and other items as required. Comprehend reading of blueprints drawings, and schematics same. Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate company truck with manual and automatic transmission. Read and interpret maps, instructional manuals, work site directions, and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Able to lift objects weighing up to 50 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged standing and movement on foot. Climb ladders (all types). Repetitive use of arms, hands, and fingers AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

Procore is looking for an inspiring and accomplished Sales Development Representativeto join one of the highest-performing sales teams in the software industry. Our Sales Development team is an essential component of our sales model and has helped fuel our incredible growth for the past several years. As aSales Development Representative, you'll develop an understanding of the construction industry and Procore's product to help improve one of the world's largest industries. This role will engage with customers throughout Canada. We pride ourselves on setting challenging goals and having fun achieving them together. We value our culture and are looking for optimistic and motivated people to join our team. Are you up for the challenge? This position will report to the Manager, Sales Development and will be based in our Toronto, Ontario, Canada office. We're looking for someone to start with us immediately! What you'll do: Create new business opportunities to fuel Procore's growth Partner with an Account Executive to achieve mutually aligned sales quotas each month Engage construction professionals through phone, email, and other channels to understand their challenges and identify opportunities to solve them Have the autonomy to operate beyond your role and help the team improve our process, training, use of technology, and any other aspects of our business Work with sales management to develop targeted lists, call strategies, and messaging to create opportunities for new business Conduct daily activities including Pre-call research and planning to make a high volume of calls per day Follow-up with previous contacts (nurturing leads) and maintain Salesforce records What we're looking for: Desire to pursue a career in Sales Will to achieve results-the curiosity and perseverance to push harder when the going gets tough Enjoy working in a collaborative ambitious environment-inspire your team to be better while achieving your goals Commitment to lifelong learning and continuous development Self-aware, reflective, and able to digest feedback critically and adapt to overcome challenges Demonstrate our core values of Ownership, Optimism, and Openness. Friendly, enthusiastic and demonstrate empathy and thoughtfulness in your work Bonus Points For: 1+ years of experience in SaaS, especially software sales Entrepreneurship Construction industry experience, especially with a general contractor or subcontractor Additional Information Base Pay Range: On Target Earning Range: This role may also eligible for Equity Compensation. Procore is committed to offering competitive, fair, and commensurate compensation, and has provided an estimated pay range for this role. Actual compensation will be based on a candidate's job-related skills, experience, education or training, and location.

The Principal Fire Protection and Wildfire Compliance Engineer is a highly specialized senior-level technical expert responsible for managing fire and life safety across the utility's infrastructure, with a specific focus on complex technical occupancies, hazardous environments, and comprehensive regulatory compliance. This role combines advanced fire protection engineering with a hands-on tactical understanding of emergency operations and a deep knowledge of specialized fire codes. The engineer will provide authoritative oversight of fire protection plan review and field inspections, integrating technical requirements into the utility's broader wildfire and property loss control strategies. Key Responsibilities Regulatory Plan Review and Enforcement Lead the fire protection plan review process for all utility facilities and construction projects, including those with special technical occupancies (e.g., generation plants, advanced control centers) and hazardous environments (e.g., fuel storage, chemical treatment facilities). Serve as the primary liaison with fire marshals, regulatory bodies, and other authorities having jurisdiction (AHJ) during plan reviews, inspections, and enforcement actions. Develop and maintain a robust system for tracking regulatory compliance, corrective actions, and documentation across all fire protection activities. Hazardous Environment and Special Occupancy Loss Control Conduct advanced risk assessments and loss control evaluations for special technical occupancies and areas with hazardous materials, identifying potential fire ignition sources, propagation risks, and mitigation measures. Specify and review the design of specialized fire suppression systems, detection systems, and fire-resistant construction for these high-risk areas, ensuring compliance with relevant NFPA standards (e.g., NFPA 30, NFPA 850) and OSHA requirements. Evaluate potential environmental impacts and associated regulatory reporting requirements related to fire and hazardous materials incidents. Utility and Wildfire Fire Operations Provide expert guidance and operational readiness evaluation, drawing on fire operations experience to inform the utility's wildfire response plans and procedures. Collaborate with internal and external fire agencies on pre-incident planning, tactical response strategies, and incident command system integration. Conduct post-incident analysis for fires impacting special occupancies or hazardous environments, using findings to drive improvements in engineering, procedures, and training. Program Evaluation and Risk Modeling Assess the effectiveness of the utility's Fire Prevention Plan (FPP) and Wildfire Mitigation Plan (WMP), particularly as they apply to hazardous environments and special occupancies. Manage and evaluate the use of wildfire risk modeling software and operational tools, incorporating specialized data related to hazardous materials and facility vulnerability. Cross-Functional and Executive Reporting Act as a technical subject matter expert for executive leadership and legal counsel, providing clear and concise report on fire protection compliance, loss control, and risk exposure. Lead cross-functional teams involving engineering, operations, safety, and environmental departments to ensure seamless integration of fire and life safety requirements. Qualifications Experience 10+ years of progressive experience in fire protection engineering, including extensive experience with regulatory plan review, field inspections, and loss control. Proven experience conducting fire and hazardous materials risk assessments in industrial or utility settings, particularly involving special technical occupancies and high-hazard environments. Demonstrated experience in fire operations, with a deep understanding of incident command, emergency response, and firefighting tactics. Expert-level knowledge of NFPA codes and standards applicable to utilities and hazardous environments (e.g., NFPA 30, 70, 850, 101). Education and Certification Bachelor's degree in Fire Protection Engineering, Electrical Engineering, or a related field. Master's degree preferred. Professional Engineer (PE) license is required. Certified Fire Protection Specialist (CFPS) is highly desirable. Skills Expert knowledge of fire science, hazardous materials behavior, electrical systems, and relevant regulatory codes (e.g., NFPA, OSHA, EPA). Advanced proficiency in plan review processes, inspection protocols, and fire investigation techniques. Exceptional written and verbal communication skills, with the ability to convey complex technical and regulatory information to diverse audiences, from field crews to executive leaders. Ability to balance technical requirements, regulatory mandates, and operational realities in a high-risk environment. Working Conditions Regular travel for inspections approximately 25% of the time. The role involves a mix of office-based work and significant fieldwork in diverse and potentially hazardous environments. The position demands flexibility and may require irregular hours during fire events, emergencies, and regulatory deadlines. #J-18808-Ljbffr

FORMA Construction (Formagc.com) is an Establish San Francisco-based High-End Residential General Contracting Firm seeking a full-time Superintendent. For Background: Our team has won multiple national awards and we have multiple selections for the American Institute of Architecture home Tours. We have also been awarded by Professional Builder Magazine and have been published in Habitat Magazine, The Independent, Dwell, Elle Decor, Coda Worx, Interior Design Magazine, and many other respected Publications! We specialize in high-end residential construction with a focus on detail and a commitment to client satisfaction. We have been fortunate to work with some of the area's top architects and designers on published and well-known unique projects. With that said, we are most proud of the team we have built and our track record of putting our people first! Below is a list of personal attributes as well as professional skills we are looking for in employees. Personal Required Attributes: - Pride in your work - Self-motivated individual that can work both in teams and independently. - Willingness to learn from others as well as teach those less knowledgeable. - Punctuality - Professional appearance and demeanor. - The ability to organize and prioritize workload. - Excellent problem solving skills - Quick to respond to emails and client communications - Organized - Belief that it's the details of a project that makes it great Professional Requirements: - At least seven years of hands on experience in high end residential projects ranging from $5M to $15M - Knowledge and understanding of construction processes and practices from foundation to finish. - The ability to read and interpret architectural, structural, mechanical plans. - Proficiency in geometry and other basic mathematical skills. - Understanding and competence of construction vocabulary. - Understanding and competence of building codes. - Excellent practical skills in both framing and finish. I.e. the ability to frame stairs and the ability to construct built-up crown molding. - Proficiency with job related tools. i.e. router, biscuit joiner, coping saw, etc. - Comfortable writing emails and using computers to access time keeping and job related information - Proficient in Microsoft Office - Knowledge of Procore, Sage 100 or Master builder a plus - Work with vendors and design team to assure timely specification and delivery of materials and construction details as-needed - Thorough knowledge of finish schedules, drawing sets, and architectural details - Candidate must show initiative, be pro-active, and take ownership of projects where appropriate - Ability to layout vendors i.e. civil, foundation, all MEP systems, landscape etc. Compensation: - Competitive pay ($135,000-$170,000 annual) based on experience with room to grow and advance within the company - Flexible Time Off - Medical benefits - Bonus - Educational allowance - Matching 401k FORMA has a deep history of investing in our people so anything you need to succeed is a priority for us. To be considered for this position, please attach resume and brief description about yourself to the above email. Responsibilities Oversee daily operations on residential construction sites, ensuring compliance with safety regulations and OSHA standards. Manage project schedules and budgets, utilizing construction management software such as ProCore and Sage. Supervise and coordinate subcontractors, carpenters and laborers, ensuring quality control and adherence to blueprints and schematics. Conduct regular site inspections to monitor progress and address any issues promptly. Facilitate communication between stakeholders, ensuring project milestones are met efficiently. Job Type: Full-time Work Location: In person FORMA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

**We are not interested in working with recruiters on this job posting. Recruiters, please do not reach out to Broadway employees.** Broadway Mechanical-Contractors, Inc. (BMC) is a fourth-generation, family-owned mechanical contractor based in Oakland, specializing in mechanical services for commercial projects in the Greater Bay Area. Since 1949, BMC has delivered comprehensive design, construction, and commissioning services for complex plumbing, piping, and HVAC systems. Renowned for innovative engineering and quality craftsmanship, BMC employs hundreds of union-affiliated and administrative staff, generating over $50 million in annual revenue. Our commitment to efficiency, waste reduction, and exceptional customer service has earned the trust of many reputable building owners, managers, and industry professionals. Role Description This is a full-time on-site role located in Oakland, CA for a Jr Estimator (HVAC, Sheet Metal) at Broadway Mechanical-Contractors, Inc. The Junior Estimator supports the estimating team in preparing accurate, timely bids for commercial HVAC and sheet metal projects. This role involves reading and interpreting plans and specifications, performing quantity take-offs, and preparing cost estimates using AutoBid Mechanical (Trimble/QuickPen) software. The position is ideal for someone with foundational sheet metal knowledge who is eager to grow into a senior estimating role. Major Responsibilities/Activities Review bid drawings, project manuals, and specifications to understand project scope. Attend project job walks and site visits as needed. Prepare quantity take-offs for sheet metal systems using AutoBid Mechanical (Trimble/QuickPen). Set up material specifications, system assemblies, and labor factors in the estimating software. Assist in developing conceptual budgets from Basis of Design (BOD) or preliminary documents. Solicit and track vendor and subcontractor quotes for equipment and services. Analyze quotes to ensure compliance with project requirements and integrate them into estimates. Prepare clear and organized proposal documents in alignment with RFP and bid form requirements. Support the Senior Estimator in bid reviews and post-bid interviews with clients and general contractors. Maintain historical cost data for future estimating reference. Stay informed on relevant building codes, industry standards, and new technologies. Minimum Requirements 3-5 years in relevant “on screen” estimating. Familiarity with AutoBid Mechanical (Trimble/QuickPen) or similar digital estimating software. Proficiency in Microsoft Office (Excel, Word, Outlook, Teams), Bluebeam and Zoom. Ability to read and interpret construction drawings and specifications. Strong attention to detail, accuracy, and organizational skills. Effective verbal and written communication skills. Preferred Qualifications Experience in a commercial HVAC or sheet metal contracting environment. Knowledge of piping or plumbing estimating a plus. Journeyman-level trade experience in sheet metal fabrication/installation is beneficial. Essential Physical Functions and Work Environment Sit for extended periods of time preparing take-offs. Office-based position with occasional site visits. Extended periods of computer work for take-offs and estimate preparation. Featured benefits We offer a comprehensive benefits package: Medical, Dental, Vision, Accident, Critical Illness, LTD, Life Insurance, 401k plan with employer match, vacation, sick leave, and paid holidays. Medical insurance Vision insurance Dental insurance 401(k) Disability insurance Must be legally authorized to work in the United States. Broadway Mechanical is unable to sponsor or take over sponsorship of employment visas. Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. **We are not interested in working with recruiters on this job posting. Recruiters, please do not reach out to Broadway employees.**

Benefits: Flexible schedule American Direct Logistics ******************************** is a National Final Mile Delivery and Assembly company. We are currently looking for Independent Contractors with the ability to deliver and install RTA furniture and fitness equipment. We have immediate openings in your geographical area. If you currently provide these services, this is an excellent opportunity to add additional revenue to your weekly earnings. The Opportunity: IC is to deliver and install RTA furniture & fitness equipment in customers' home. Supplemental income (no routed work) Flexibility to schedule jobs based upon your schedule. Growth opportunity Responsibilities: Contact customer to schedule delivery/installation appointment. Picking up freight from your local warehouse Delivering and assembling product to our customers' homes Provide trash removal from installation site Job Requirements: Cargo van, sprinter van, box truck (up to 16') Delivery & Assembly experience required (minimum 2 years) 2 man team (IC's must have their own helper, we do not hire helpers) Valid driver's license, vehicle registration and vehicle insurance Excellent communication skills (must speak fluent English) Smart phone Able to pass a background check Earnings Potential- $500-$1500 Weekly Direct Deposit Flexible Schedule Third Party Insurance Provider Available (commercial auto, general liability, cargo) We will send you our introductory email that will get you started with our hiring process once you submit your application.

A blockchain-based payment company is looking for an early Product Engineer to help partners move money on-chain. You will work with design partners to build production-ready applications. Responsibilities include delivering customer applications, building fullstack solutions, and collaborating with cross-functional teams. The ideal candidate has strong TypeScript skills, and needs to thrive in a collaborative, high-energy environment. This role is perfect for engineers aspiring to take initiative and deliver impactful solutions. #J-18808-Ljbffr

Assistant Project Manager - Commercial Construction Reports To: Tom Underwood Employment Type: Full-Time About the Role We are seeking a driven, entrepreneurial-minded Assistant Project Manager to support our commercial construction projects across North and South Carolina. This role is ideal for someone who thrives in fast-paced environments, embraces responsibility, and is ready to hit the ground running-no hand-holding required. Key Responsibilities Oversee and support multiple commercial construction projects in the Carolinas. Travel regularly to job sites to ensure project alignment, progress, and quality. Collaborate with project managers, subcontractors, and site teams to meet deadlines and budgets. Monitor schedules, budgets, and documentation to ensure compliance and efficiency. Use construction management software and digital tools to track progress and communicate updates. Identify and resolve issues proactively, maintaining momentum and accountability. Required Qualifications Commercial construction experience is mandatory. No exceptions. Proven ability to manage multiple priorities with grit, tenacity, and efficiency. Technologically savvy-comfortable with project management platforms, digital documentation, and remote collaboration tools. Strong communication and organizational skills. Entrepreneurial mindset with a proactive, solutions-oriented approach. Willingness and ability to travel frequently across the Carolinas. Ideal Candidate A go-getter who thrives on autonomy and responsibility. Someone who sees challenges as opportunities and takes initiative without waiting for direction. A professional who aligns with our culture of excellence, ownership, and forward-thinking execution.

Echo Neurotechnologies is an exciting new startup in the Brain-Computer Interface (BCI) space, driving innovation through advanced hardware engineering and AI solutions. Our mission is to deliver cutting‑edge technologies that restore autonomy to people living with disabilities and improve their quality of life. Team Culture Join a small, dedicated team of knowledgeable and motivated professionals. Our early‑stage environment offers the opportunity to take ownership of broad decisions with significant and long‑lasting impact. We emphasize continuous learning and growth, fostering cross‑functional collaboration where your contributions are vital to our success. Position Overview As the Lead Electrical Test Engineer, you will be responsible for planning, coordinating, and executing system‑level electronics testing that demonstrates Echo's BCI devices are safe, effective, and compliant with FDA and international standards. You will lead electrical testing across Pre‑V&V, V&V, and production, ensuring requirements are testable, designing rigorous test protocols, and delivering FDA‑ready evidence for design controls. In addition to verification and validation, you will establish and maintain production test strategies to ensure reliable device manufacturing. With your expertise in electronic systems and test engineering, you will bridge development and operations to ensure Echo's implantable and wearable systems meet the highest safety, quality, and manufacturability standards. Key Responsibilities Define and lead system‑level test strategies across electrical subsystems, integrated device, and system validation. Translate system and design requirements into test protocols with clear, measurable acceptance criteria. Lead Pre‑V&V electronics efforts: bench bring‑up, early feasibility testing, and design‑for‑testability. Direct system‑level verification and validation testing (bench, hardware‑in‑loop, simulated clinical use, IEC 60601 electrical safety). Develop and maintain production test systems: design test fixtures, sockets, automation scripts, and scalable processes for manufacturing. Collaborate with Electrical, Firmware, Systems, QA, and Regulatory teams to ensure compliance with FDA 21 CFR Part 820, ISO 14971 (risk management), and related standards. Liase with System DVT lead, internal teams, and consultants. Generate Verification and Validation Reports, production test documentation, and FDA submission‑ready documentation. Lead failure investigations at system and production level, ensuring root cause analysis and corrective actions are documented and retested. Provide test engineering leadership in support of design transfer to manufacturing and ongoing production quality. Qualifications Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Biomedical Engineering, or related field. 7+ years of experience in electronics/system testing, verification, and validation for medical devices. Proven experience leading component‑level, subsystem, and system‑level test campaigns for Class II or III medical devices (implantable preferred). Experience in designing and scaling production test systems for medical electronics. Strong knowledge of standards and regulations: 21 CFR Part 820 (Design Controls) IEC 60601 (Electrical Safety & EMC) ISO 14971 (Risk Management) IEC 62366 (Usability Engineering) Familiarity with hardware‑in‑loop and system integration test methods. Experience collaborating across disciplines (EE, FW, ME, QA, RA, Manufacturing, external labs). Skills and Abilities Expertise in electronic system test methods: signal integrity, power analysis, EMI/EMC, environmental stress, and safety compliance. Ability to design, implement, and oversee system‑level verification and validation test plans. Proven experience developing and maintaining production test setups, fixtures, and automation for medical device manufacturing. Proficiency with lab equipment: oscilloscopes, spectrum analyzers, DMMs, logic analyzers, power analyzers. Skilled in writing clear, defensible test protocols and reports for regulatory and manufacturing use. Strong organizational discipline in traceability, version control, and change management. Ability to lead cross‑functional test campaigns and manage external test labs/CROs. Excellent communication skills, able to translate test results for engineers, QA/RA, and regulatory reviewers. What We Offer An opportunity to work on exciting, cutting‑edge projects to transform patients' lives in a highly collaborative work environment. Competitive compensation, including stock options. Comprehensive benefits package. 401(k) program with matching contributions. Equal Opportunity Employer Echo Neurotechnologies is an Equal Opportunity Employer (EOE). We celebrate diversity and are committed to creating an inclusive environment for all employees. Confidentiality All applications will be treated confidentially. Applicants may be asked to sign an NDA after the initial stages of the interview process. #J-18808-Ljbffr