Bench shear operator jobs near me

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Job Duties * Set-up, adjust, and operate brake press and hydraulic press to from (bend angles), rework, and straighten parts to print specifications. * Inspect parts per print specifications. * Change tooling as needed. * Use a hoist or lift truck to move parts as needed. Minimum Qualifications * High school diploma or equivalent is required. * Must be able to read blueprints, understand some complex math computations (finding angles, degrees, and measurements, converting fractions), understand basic math, (including fractions and decimals), be able to convert between metric and standard units, knowledge of CNC programming, remember, observe, and problem solving. * Per 8 hr. shift (stand 6 hrs., walk 2 hrs.) frequently (balance, torque, push/pull), occasionally (bend, squat, reach above shoulder level, reach below knee level, work with arms outstretched). Infrequently work above chest level. Frequent lifting and carrying (frequently from 0 to 50 lbs.). Must be able to see, hear, use a foot pedal, and do simple and firm grasping with both hands on a repetitive basis. Must be able to work in a noisy environment that includes exposure to vibration, dust, shavings, solvents, grease, and oil. Must be able to work safely in areas of lift truck traffic. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; visual inspection involving small defects, small parts, and/or operation of machines; using measurement devices; and/or assembly or fabrication of parts at distances close to the eyes. Preferred Qualifications * Experience with reading inspection measuring tools including micrometers, calipers, square arms is recommended. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Lima Nearest Secondary Market: Findlay Job Segment: CNC, Fabrication, Forklift, Warehouse, Equipment Operator, Manufacturing

Job DescriptionCrucial Link is hiring in Seville, OH for a 3rd Shift Stamping Press Operator Must be willing to submit to a nationwide background check and a pre-employment drug screen. . Job Title: Stamping Press Operator - 3rd Shift Location: Seville, OH Shift: 3rd Shift (Monday - Friday, 10PM - 6:30AM) Pay: $24-30/hr based on skills, abilities, and experience. Position Overview:We are seeking a reliable and detail-oriented Stamping Press Operator to join our team on 3rd shift. The Stamping Press Operator will be responsible for setting up, operating, and monitoring stamping press machines to produce quality metal parts according to specifications. The ideal candidate will have experience in a manufacturing environment, strong mechanical aptitude, and the ability to work effectively in a fast-paced production setting. Key Responsibilities: Set up, operate, and monitor stamping press machines in accordance with production requirements. Load materials into the press and unload finished parts safely and efficiently. Inspect parts for accuracy and quality, using calipers, micrometers, and other inspection tools. Perform routine maintenance, cleaning, and adjustments on machines to ensure optimal performance. Follow all safety procedures, including the use of proper PPE. Maintain accurate production records and documentation. Work collaboratively with team members and supervisors to meet daily production goals. Identify and report any equipment malfunctions or quality issues immediately. Qualifications: Previous experience operating stamping presses or other metal forming machinery preferred. Ability to read and interpret blueprints, work instructions, and measurement tools. Strong attention to detail and commitment to producing quality parts. Basic mechanical aptitude and troubleshooting skills. Ability to lift up to 50 lbs. and stand for long periods. Willingness to work overtime as needed. Benefits (upon hire): Competitive pay with opportunities for raises. Health, dental, and vision insurance. 401(k) with company match. Paid time off and holidays. Advancement opportunities in a growing company.

Job Description IronRoad is conducting a confidential search for a 2nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

A precision machining company in the Cincinnati area is seeking a skilled ProtoTRAK Lathe Operator to join its first-shift team. This position involves full setup and operation of ProtoTRAK lathes in both manual and CNC modes, including conversational programming, tooling changes, and producing high-quality parts to print. The ideal candidate will have strong machining experience, attention to detail, and the ability to work with minimal supervision in a clean, organized shop environment. **Key Responsibilities** + Perform complete setup and operation of ProtoTRAK lathes, both manual and CNC. + Use conversational programming to write simple programs directly at the machine. + Select appropriate tooling for drilling, tapping, cut-off, and turning operations. + Control feeds and speeds to produce accurate parts while minimizing secondary operations. + Produce parts from raw material to print or company specifications, ensuring clean and burr-free finishes. + Read and interpret blueprints and engineering drawings. + Inspect parts using precision measuring devices such as micrometers, calipers, and optical comparators. + Perform routine cleaning and maintenance; follow lockout/tagout procedures. + Adhere to all safety regulations and company policies related to attendance, labor reporting, and housekeeping. + Operate additional machines as required by the Supervisor. **Qualifications** + Experience operating and programming ProtoTRAK lathes (manual and CNC). + Ability to write conversational programs at the machine. + Strong blueprint reading and inspection skills. + Knowledge of tooling selection and machining fundamentals. + Ability to work independently and maintain accuracy with minimal oversight. + Physical ability to bend, stoop, stand, walk, and lift light materials throughout the shift. **Benefits:** + **Medical insurance** + **401(k):** Offered + **Paid holidays** + **Standard PTO package** + Stable, long-tenured shop with low turnover **Equal Employment Opportunity** This employer is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected characteristic. **Pay Details:** $20.00 to $25.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As a Bench Operator (Blender) you'll set up and operate a variety of hand tools such as hammers, files, dremel's, drills, presses, pedestal grinders and belt grinders, low temperature ovens and hand grinders to perform various operations such as blending, blasting & stripping, chasing threads, deburring, angle checking, coldworking metals, masking. **Entry level position, no experience needed. We will train qualified candidates. What you'll do: Conduct airfoil blending on a variety of Turbine Engine Blades utilizing a belt sander and pedestal grinders, using the correct blending materials and techniques to restore the correct profile and contour of the Turbine Engine Blades per the Engine Manuals. Ensure maintenance operations are performed in the appropriate sequence. Ensure that all test equipment or tools used to make airworthiness determinations is labeled in accordance with the RSQM before use. Complete the appropriate paperwork. Complete all maintenance or alteration processes IAW established standard work processes. Support cell personnel with the performance and appropriate documentation of maintenance or alterations performed. Confirm quality of work performed through routine in-process checks. Track and communicate status of assigned work orders to ensure on time delivery is met. Cover for absent team members to avoid interrupting the flow. Perform start-up and shut down activities of the production facility as assigned. Requirements: Previous experience reading/interpreting manuals, technical drawings, and/or blueprints. Lift up to 25lbs without assistance. Able to stand for extended periods of time during the blending process. Preferred Qualifications: You must be (or become) thoroughly familiar with the use of all tooling, equipment, technical data and inspection aids for their overhauling of the Blades. Ability to follow both written and verbal instructions. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities

About Us: Founded in 2012 Faxon Firearms is a leading manufacturer of high-performance firearms and components, known for quality, innovation and service. We are passionate about craftsmanship and continuously improving our products to meet the needs of both professional shooters and enthusiasts. Our company values collaboration, growth, and excellence, offering a dynamic environment for employees to thrive. Join us in shaping the future of the firearms industry! General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). Monitor machine performance and adjust machining parameters for efficiency and tool life. Ensure parts meet quality and dimensional standards throughout production runs. Complete required documentation including job travelers, inspection sheets, and production logs. Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. High school diploma or equivalent required; technical training or machining certificate preferred. Proficiency in blueprint reading and using standard inspection tools. Familiarity with G-code programming and ability to make minor edits and offsets at the machine. Strong understanding of speeds, feeds, cutting tools, and basic machining principles. Ability to work independently with minimal supervision on second shift. Preferred Qualifications Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. Experience operating lathes with sub-spindles and Y-axis features. Background in high-mix, low-volume production environments. Familiarity with ISO 9001 or AS9100 standards and quality control procedures. Forklift or overhead crane experience/certification a plus. Physical Requirements Ability to stand for long periods, lift up to 50 lbs, and handle repetitive tasks. Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation Second Shift: Shift differential may apply Competitive hourly wage based on experience Overtime opportunities available Benefits Health, dental, and vision insurance 401(k) with company match Paid holidays and PTO Training and advancement opportunities

Requirements QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE No prior experience or training. GED/High School diploma LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Forklift operator certification preferred. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to talk or hear. The employee is occasionally required to walk. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually loud.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. * Reads and understands job ticket. * Sets up arbor (calculated). * Sets all controls, dials, and gauges. * Uses inspection, measurement, and test equipment. * Performs camber check. * Sets up according to the job ticket. * Assist in handling when necessary to maintain maximum level of productivity. Requirements QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE No prior experience or training. GED/High School diploma LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS Forklift operator certification preferred. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to talk or hear. The employee is occasionally required to walk. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually loud.

Pixelle Specialty Solutions™ is the largest specialty paper company in North America, with fully integrated pulp and paper operations in Chillicothe, Ohio, Spring Grove, Pennsylvania, and a coating operation in Fremont, Ohio. Supported by an experienced product development team, Pixelle excels in designing customized solutions that help customers bring new products to market. With a long history of leadership in the paper industry, Pixelle delivers the most comprehensive portfolio of specialty papers to help you meet today's challenging demands. Job Description The Slitter Operator is responsible for operating machinery that converts paper rolls into finished products meeting customer specifications. DUTIES & RESPONSIBILITIES: Operate at maximum productive speed allowable to achieve and maintain consistent high standards of quality for the finished product Maintain consistent high standards Stock with essential supplies Make-ready reduction participation Prepare finished rolls and provide the Auto Wrapper with ready-to-wrap product Make all size changes, mount rolls, handle cores, and cut down bad product Provide information to Maintenance and supervision via work orders on known equipment problems Lift and move butt rolls, carry cores, cut paper with knife, bend, stoop, lift and step up and down Keep the surrounding work area clean and neat at all times Keep waste at a minimum Other duties as assigned REQUIREMENTS: Learn and understand all products and procedures Must be trained in Optivision and Proficy Good communication and organizational skills with fellow workers, leadership and support groups Basic addition, subtraction, multiplication, and division skills including how to read a ruler to +1/64” Ensure that QMS document training is complete, current, and followed Follow and adhere to all work practices, operating, standard, and make-ready procedures as set for this operation Comply with all safety rules and regulations, report any problems or unsafe conditions and wear all safety equipment as required Must be able to work independently and as a team member Be able to problem solve in order to know what steps to take for production and quality needs Maintain and troubleshoot equipment which includes participation in the Preventative Maintenance Programs FLEXIBILITY: Incumbent will be expected to train in additional roles and perform satisfactorily any qualified job assignments within the Fremont facility. Additional Information

TekWissen provides a unique portfolio of innovative capabilities that seamlessly combines clients insights, strategy, design, software engineering and systems integration. Our tightly integrated offerings are tailored to each clients requirements and span the services spectrum from Application Development/Maintenance, testing, IT Consulting & staffing for IT Infrastructure Management through strategic consulting and industry oriented Business Process. Our end-to-end Business Process as a Service (BPaaS) solutions support complex, high-value, knowledge based work. Combining applications, platforms, infrastructure, knowledge processes, and domain expertise allows us to deliver greater efficiencies and innovative business capabilities. Job Description Position Title: Press Operator - Stamping FLSA Status: Non-exempt Level 2 Position Summary: Performs duties required to efficiently operate the stamping press to manufacture quality parts. Position Responsibilities: · Performs press operations in accordance with Operation Standards and Work Instructions. · Detects and reports defective materials to supervisor. · Conducts press operation safety checks on prescribed intervals. · May perform minor maintenance and machine adjustments. · Operates overhead crane to stage steel coils at the press. · Records production data in the system. · Performs general clean-up and organization of work area (SCORE- Safety, Cleanliness, Organization, Responsiveness, and Efficiency). · Other duties as assigned to maintain production. Qualifications: · High School diploma. · Follows all safety requirements of the company - PPE, (hat, glasses, steel-toed boots, uniform, hearing protection, gloves, etc.) safe job behaviors, etc. · Able to safely and efficiently operate a forklift by passing forklift training class and obtaining license. · Regularly required to lift up to 50 lbs. · Able to read and understand operation standards, job instructions and product labels. · Able to handle multiple tasks and meet production quotas. · Overhead crane training. Work Environment: · Plant environment. · Must be able to stand for long periods of time. · Regularly exposed to dust, odors, noise, smoke, etc. Additional Information If you are available, interested, planning to make a change, or know of a friend who might have the required qualifications and interest, please call me ASAP at ************ Thanks & Regards, Raju

Excited to grow your career? We value our talented employees, and whenever possible strive to help one of our associates grow professionally before recruiting new talent to our open positions. If you think this open position is right for you, we encourage you to apply! Join our team of exceptional employees at Regal Rexnord Cleveland Division. Our people make all the difference in our success. We have one opening for an off shift Cut Off Operator The Cut-Off Operator is responsible for cutting materials for sales orders/ work orders. Performs general labor and distributes material to the appropriate location. This position will train on first shift but can remain on first or transition to off shift. As a Cut-Off Operator at Regal Rexnord your focus will be to: Operate centerless grinder machinery upholding and adhering to production standards and ISO 9001 regulations and guidelines. Inspect product to print, looking for any flaws and defect of material, including deburring if necessary. Move completed material to next workstation. Maintain clean and safe work environment. Required Skills Education: High School Diploma or GED Experience: entry level willing to train Specific Skills & Knowledge: Ability to interpret and understand verbal and written directions. Mechanically inclined with strong math skills. Ability to read basic measuring devices, including micrometers, and calipers. Working knowledge of surface footage and feed rates and experienced in calculating feeds and speeds. Must successfully complete a blueprint reading course. This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position. Physical Demand and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus. About Regal Rexnord Regal Rexnord Corporation (“Regal Rexnord”) is a leading manufacturer of electric motors, electrical motion controls, power generation and mechanical power transmission products and sub-systems, serving customers around the world in the general industrial, consumer, commercial construction, food & beverage, and alternative energy end markets, among others. Regal Rexnord sells its products and solutions to OEMs, through distributors, and directly to end-users. Regal Rexnord is a $7.2B company with 36,000 associates globally. You may not know it, but Regal Rexnord impacts your life every day. The company's products enable the fans in HVAC systems that keep us comfortable; the power source that keeps smart buildings running; the agricultural and food service equipment that keeps us fed; and the conveyer systems that keep e-commerce flowing, to name a few of the applications where our products are used. Regal Rexnord's business purpose is to create a better tomorrow by energy-efficiently converting power into motion. This means creating innovative solutions while focusing on both customer needs and the company's commitment to sustainability. The company's industrial powertrain and automation solutions offerings are an important part of the company's growth strategy. The company's strategy includes leveraging 80/20 to prioritize all activities, including product excellence, operational excellence and commercial excellence (i) driving organic sales growth through the introduction of innovative new products, with a particular focus on improving energy efficiency, (ii) establishing and maintaining new customers, as well as developing new opportunities with existing customers, (iii) participating in higher growth end markets and geographies, and (iv) identifying and consummating strategic, value creating acquisitions. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third parties for hires made. Please note that you must be in your current position for a minimum of 6 months to be eligible to apply for other internal positions. This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position. Benefits Medical, Dental, Vision and Prescription Drug Coverage Spending accounts (HSA, Health Care FSA and Dependent Care FSA) Paid Time Off and Holidays 401k Retirement Plan with Matching Employer Contributions Life and Accidental Death & Dismemberment (AD&D) Insurance Paid Leaves Tuition Assistance About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email ***************************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ***************************. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

TempToFT Job Title: CNC Mill/Lathe Operator/Set-up Pay Rate: $20-24 PER HOUR BOE Hours: Monday through Thursday 6AM-430PM Occasional OT on Friday 6am-430pm Job Description: Job Summary: Set up & operate CNC Mill/Lathe to change, load/unload & produce parts Responsibilities: • Monitor & maintain equipment such as lubricant & cooling levels • Apply basic concepts of Alegra & Geometry • Avidly interpret Blueprints Physical Requirements: LIFTING: ENVIRONMENT: 1-20LBS STANDING, PUSHING PULLING Work Environment: o PACE OF ENVIRONMENT: MED o LEVEL OF SUPERVISION: HIGH o LEVEL OF INTERACTION WITH OTHERS: MED o ABILITY TO HANDLE MULTIPLE TASKS: MED o LEVEL OF EXPERIENCE REQUIRED: HIGH o TRAINING PROVIDED: LIMITED Location: Akron Dress Code: STEEL TOED SHOE/BOOTS CNC Mill & Lathe Operations. $20- $24 per hour BOE Essential Duties and Responsibilities include, but are not limited to, the following: • Operate programmed machinery to change, load/unload, and produce parts to specified design. • Monitor the feed and speed of machines during the machining process. • Inspect items as instructed and provide feedback to management to ensure any quality defects can be avoided in the future. • Inspect parts per blueprint as instructed. • Ability to apply concepts of basic algebra and geometry. • Monitor and maintain lubrication and coolant levels / points. • Clean up job site after work and return equipment and tools. • Supply own basic hand and measuring tools. Requirements / Competencies Expected: • Ability to read blueprints • Must demonstrate job responsibility consistency • Requires the ability to read and follow detailed written and/or verbal instructions • Demonstrate eagerness to learn different part/machine setups and operations. • Must demonstrate regular attendance 20.00 Qualifications High School Minimum 2 YEARS

Summary : Responsible for running lathe machines. This involves tasks related to set-up, machine operation, and disposing of chips as required. Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape measure, and brooms. This list is not all inclusive. Job Functions and Functional Job Task Elements Task 1: Lathe Operation Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc. An overhead crane is used on these machines to set rolls and take out chip boxes. The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook. Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others. They weigh between 10-40#s and are handled on an infrequent basis per hour. Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands. When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour. Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position. Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms. Some lathes do not have hydraulics to move the rolls on the machine. The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc. This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools. To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month. Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool. There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task. Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour. Need to be able to push chips that are approximately 12 feet away. Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends. The parts are mounted sideways from the right and the left. On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side. Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour. Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application! Requirements Shift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch. . Flooring: Cement, wooden platforms, grates, rubber mats. Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity. Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes. Strength Range: Medium-Heavy strength range.

A manufacturing company is seeking a Press Operator for stamping machines, inspection of parts, update data sheets, packaging of smaller containers, lifting up to 35 pounds, and performing other duties. You will work Monday through Friday from 7:30 a.m. to 4 p.m. with overtime available.

AMG is a metal stamping and fabricating business that supplies mostly into the automotive industry. We manufacture a variety of structural parts for vehicles as well as specializing is decorative exhaust components. Job Description Opportunities will rotate around various machines and assembly needs on a daily basis We can teach anyone who has a desire to learn and be part of a team This position offers a fast paced working environment High quality and safety performance is expected Qualifications A desire to learn A helpful and positive attitude A teamwork mentality This position requires the ability to stand for extended periods of time and lift up to 25 pounds. The ability to work 2nd (3pm - 11pm) & 3rd (11pm - 7am) shifts Additional Information Benefits we offer: 11 paid holidays Vacation Employer matching contributions to your 401(k), Life insurance (the first $35,000 of which is at no cost to you) Medical /dental /vision insurance, Eligible on the first of the month after you complete 60 days. Short term disability coverage Prescription safety glasses reimbursement Steel toe shoe reimbursement

Slitter OperatorFull-Time Regular Hebron, OH, US$19/hr +50 cent shift differential The primary responsibility of this position is to set up and operate slitting machines; to cut film to specified widths, lengths and diameters in a way that meets or exceeds standards for safety, quality and productivity. Job Duties: Maintains a clean and orderly work area/warehouse Maintains a safe working environment by following all company safety policies and procedures and reports unsafe conditions and incidents, while maintaining quality standards Maintains company's quality standards and follows computer procedures to handle damaged material and quarantine material Transport materials to designated areas with forklifts Installs and aligns razor blades for slitting feedstock materials Starts machine, adjusts blade and controls, using wrenches, rulers, gauges, templates or other tools, and monitors operation Tests and adjusts settings as required for producing according to specification Selects, cleans, and installs spacers, lay-on bars, sleeves, and blades to set machine up to run in conformance to specifications Reads production schedule, customer specification, and other documents to determine set up or adjustment of equipment Threads feedstock from reel through slitter and secures on rewinder Observes machine operation and examines rolls for flatness, holes, surface and other defects Measures dimensions of rolls using tape measure, gauge, template, ruler and square, for conformance to specification Interacts with PLC computer to operate machine and possibly adjust parameters Uses computer to enter production times, enter weights, generate tickets, etc. Other duties as assigned Job Qualifications: High school diploma or general education degree (GED), one to three years of experience preferred Ability to work at a fast pace Ability to multi task and read production tickets Ability to perform math calculations including fractions Must be able to read tape measure, including micrometers Must be able to successfully obtain and maintain forklift certification in accordance with internal company and OSHA standards Must be computer literate Must be dedicated to continuous improvement Must be able to lift 50 pounds, bend, stretch, or stand for extended periods of time Must have organizational skills with an ability to prioritize and multi-task Ability to maintain confidentiality, exceptional attention to detail and good follow-up skills Must possess good problem solving skills. Ability to interact in a professional manner with employees and vendors Ability to communicate effectively both verbally and in writing Willingness to work as team member or independently

Full-time Description Duties/ Responsibilities: Simultaneously runs a minimum of two primary machines; responsible for quality and quantity of products being manufactured; demonstrates ability to proficiently operate multiple primary machines. Performs all material handling duties required to keep a job productive; safely retrieves materials and returns the unused coil/wire stock to the storage areas using an electric hand-cart or fork truck. Operates stamping press and other machinery in a safe manner. Maintains excellent housekeeping practices. Maintains 6S (sort, set, shine, standardize, sustain, safety) standards in all work stations. Completes other duties as assigned by supervisor. Skills: Must have 1-5 YEARS of prior Stamp Press Operator experience Knowledge of blueprint reading. Basic computer skills. Basic math skills (ex. addition, subtraction, multiplication, fraction/decimal equivalents). Mechanical inclination. Organizational skills and attention to detail. Time management skills with a proven ability to meet deadlines. Interpersonal and written communication. Abilities: Function well in a high-paced and at times stressful environment. Work well with others on a team. Solve problems quickly and efficiently. Willingness to have performance measured daily. High school diploma or equivalent. Physical Requirements: Uncontrolled environmental conditions: noise, dust, dirt, and mobile equipment. Routine, repetitive lifting up to 35 lbs., occasional, heavy lifting, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day. Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, feeling, and walking 8 to 10 hours per day. Ability to work up to 8-10 hour shifts and overtime as required by the work. Use of all limbs, dexterous and steady use of hands and arms for long periods of time. Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area. Monti, Inc. is proud to be an Equal Opportunity Employer.

At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees in our climate-controlled plants. Ready to cut with precision? We're Hiring Experienced Cutter Operators! Join a team that values your skills with Polar or Saber machines and offers consistent work and great teammates. Summary : The Cutter Operator I is responsible for the setup, adjustment, and safe operation of all cutting equipment to prepare product to be packed, collated, or bound, ensuring the meeting of customer specifications, in accordance with company policies and procedures. Schedule : 1st Shift, Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 6:00 AM - 2:00 PM, or similar. This is an in-person position. Training may occur at other times. 2nd shift, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 2:00 PM - 10:00 PM, Monday - Friday, or similar. This is an on-site position requiring the employee to be present physically. 3rd shift, Monday-Friday, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 10:00 PM - 6:00 AM, or similar. This is an in-person position. Training may occur at other times. Salary Range: $16.00 To 18.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: Maintain and operate batching system to ensure the completion of assignments Identify priority jobs to be completed Review job tickets and strategically plan work processes to meet customer specifications for custom jobs Collaborate with side cutter operators by communicating inspecting and identifying order types Troubleshoot machines, if possible, to resolve any problems and/or notify production management Replace worn cutting blades with hand tools, as required Set up job assignment specifications, obtain approval and run product once authorized by supervisor or Plant Manager Monitor apparatus during run, adjust as needed to ensure adherence to specification including operating speed Ensure completion of assignments by meeting quality/quantity specifications and requirements Complete and process all required paperwork, records, documents, etc. Regularly perform general housekeeping duties in your work area(s) Adhere to all safety policies and protocols and maintain a safe working environment Assist in cultivating an interdependent safety culture by reporting workplace hazards, related injuries, illnesses and or/near misses to management immediately Attend all department/company meetings Other duties as assigned For an extensive list of responsibilities, duties and physical demands/work environment please refer to the attached Job Description. EDUCATION, LICENSES, CERTIFICATIONS, EXPERIENCES: High School Diploma or GED equivalency One-year related experience with Polar or Saber cutting machines in a manufacturing environment CRITICAL KNOWLEDGE, SKILLS, AND ABILITIES REQUIREMENTS: Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes. Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness. Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately. Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance. Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division. Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4over LLC Company History: 4over LLC was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care 4over pays 100% of the employee's premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000 Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan New employees are eligible to enroll the first of the month, following 1 month of employment Semi-annual open enrollment (January 1st and July 1st) Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation Immediate Vesting Holidays and PTO 9 Paid Holidays Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Job Title: Slitter Operator Job Status/ Grade: Hourly Location: Lancaster, Ohio Department: Manufacturing, Coating Reporting To: Plant Supervisor Direct Reports: None Starting Pay: 20.50/Hour ** 1st Shift 7:00am - 3:00 pm Monday - Friday ** Job Summary: The Slitter Operator is responsible for operating machine to edit non-conforming material and/or to slit continuous lengths of material such as cardboard, felt, metallic foil, paper, plastic, rubberized sheeting, or textile fabrics into strips of specified width by performing the following job functions. Essential Job Functions: Mounts roll of material on machine supports and threads material over tension bar, and between feed rollers. Tapes material onto cores. Starts machine and observes flow of material through machine to detect irregular winding. Moves levers to stop, start, and regulate speed of machine and to align material. Sets anvils and blades, cuts cores and spacers. Checks cuts for correct size and ensure edges of cuts are smooth. If edges are rough, make necessary adjustments to knife blades. Watches material to ensure patterns stay in spec. Disengages winding shaft and removes rolls of material. Check materials pre, in process and postproduction using calipers and rulers. Maintain neat and accurate machine reports. Accurately pick raw material, return raw material, enter labor tracking and complete rolls into the ERP system. Accurately label rolls for shipment, inventory or next process in line. Operates slitter at maximum speed while slitting materials for maximum performance while maintaining quality. Other duties may be assigned. Qualifications: Required: High school diploma or general education degree (GED) required. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Attendance/Punctuality - Is consistently at work and on time. Preferred: Basic knowledge of bar-coding software, label printing software and the ability to enter data via keyboarding and/or by using scanning guns. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is required to stand; walk; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment: The Slitter Operator work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Other: This Slitter Operator in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Acknowledgement: I understand that I may be called upon to perform additional duties if the work is similar, related, or a logical assignment to the position. I have read and understand this job description, and I agree to perform such duties to the best of my ability.