Bernick's jobs - 11,146 jobs

About Us: Bernick's is a 5th generation family-owned provider of beverages, vending and food solutions, representing leading brands such as Pepsi, Dr Pepper, Miller Brewing Company and New England Coffee. We service locations in greater MN and western WI. Job Summary: Vending Warehouse picks and fills customer orders with a variety of vending, snack, candy, and beverage products. Responsibilities: * Meet picking goals and warehouse objectives * Accurately pick and fill customer vending orders * Load and rotate products * Check-in deliveries and returns Hours: Full-time (40 hours per week) * Monday - Friday, 7:00AM - Completion * No weekends or holidays * Regularly lift and move product weighing up to 50 lbs * Repetitively stand, bend, lift, and twist, while moving snack and beverage products * Safely operate warehouse equipment, such as walkie riders, pallet jacks, and forklifts * Effectively communicate both verbally and in writing

This entry-level position is responsible for learning and training on a variety of tasks to process, dry and package whey products that meet customer expectations and support the achievement of the company's vision, mission and values. Essential Functions Provide assistance to operators and learn the basics of each position. Perform preventative operator maintenance (POM) duties and complete additional cleaning tasks as determined by the supervisor. Provide support to Whey Operator during CIP process. Monitor, test and correct CIP concentrations. Assist and support cleaning-related POMs. Assist in CIP on MP RO/POL, Water HTST and all associated lines, tanks and equipment according to SOPs. Provide support to Lactose Operator and Evap Operator during CIP process. Monitor and sample RO/POL/HTST process during shutdown, CIP, and startup at specified control points and correct any deviations from defined analytical set points. Transport finished WPC80 and Lactose to storage. Maintain good communications with lead and/or supervisors to ensure a safe, continuous product flow and proper maintenance of equipment. Complete and maintain appropriate paperwork and documentation to ensure accurate record keeping. Operate and monitor assigned food safety preventative controls including verification activities, equipment operation, records requirements and corrective action database. Safely handle, prepare and use chemicals while wearing proper PPE. Attend and/or complete required safety and quality training sessions by the assigned deadlines. Comply with all company safety rules to achieve no injuries and no lost time accidents. Understand and adhere to all food safety, GMPs, and OSHA policies and procedures. Adhere to all standard GMPs and performs all work in a manner that ensures the highest standard of food safety and quality. Competencies Teamwork Oriented Problem Solving/Analysis Communication Proficiency Initiative Detail Oriented Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This job operates in a food production environment. While performing the duties of this job, the employee is frequently exposed to chemicals, moving mechanical parts and vibration. The noise level in the work environment can be loud. Physical Demands Please refer to the separate functional for this position. Position Type/Expected Hours of Work This is a full-time position, and days of work are on an alternating repeating schedule. Hours of work for training are from 5:00 a.m. - 5:00 p.m., working an alternating schedule. Once trained, anticipated transfer to night shift to fill permanent position, working from 5:00 p.m. - 5:00 a.m. working an alternating schedule. Travel No travel is expected for this position. Required Education and Experience High school diploma or GED is required for this position. Maintain current forklift certification. Preferred Education and Experience Desire two or more years in a manufacturing facility. More specifically, experience with food grade products is preferred. Bilingual in English/Spanish. Additional Eligibility Qualifications Minimum age requirement is 18. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. 5-2-2-5 5:00AM to 5:00 PM or 5:00 PM to 5:00 AM

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Extensive travel required. (Local, National) · Promotes and adheres to the ATS safety culture. · Engages in various work environments and industries to lead reliability centered maintenance efforts. · Mentors, coaches, and provides reliability best practices for applications in customer facilities, by customer personnel · Identifies top potential issues leading to lost production and preventable maintenance spending. Communicates findings with leadership. · Provides solutions to root cause deficiencies and demonstrates economic benefits to their correction. · Actively drives the implementation of equipment improvement projects. · Identifies and implements current and new processes / technologies to increase equipment performance and uptime · Champions systems and best practice procedures towards a proactive manufacturing culture. · Analyzes equipment performance, failure data, and corrective maintenance history to develop and deploy engineering solutions, improved maintenance strategies, preventative maintenance optimization, and other reliability techniques. · Provides technical service to operations and manufacturing personnel on equipment related troubleshooting efforts. · Utilizes predictive, preventative, and precision maintenance technologies and strategies designed to identify or control risks prior to failure and ensure optimum maintenance execution. · Collaborates with the maintenance team to prioritize assets and actions by determining failure probabilities and evaluating the risk of compliance, supply, strategy, and cost. · Provides training and coaching in Root Cause and Reliability Analysis and takes ownership for ongoing corrective action tracking, implementation and follow up to ensure that all Root Cause Analysis projects are documented. · Ensures compliance with regulatory requirements and ATS policies and procedures. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in engineering (ABET accredited) · Eight or more years of reliability experience across 2 or more manufacturing sites · Demonstrates ability to perform full array of reliability tool sets · Strong technical understanding of electrical or mechanical components, tools, and designs · Ability to complete a failure mode effects analysis, cause and effect diagrams, root cause failure analysis, life-cycle costing, and risk analysis · Ability to research and apply new equipment technology / trends · Robust problem solving, mathematical, analytical, and decision making skills · Proficiency with computers, maintenance systems, and applications, including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Strong reporting and technical writing capability · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop into a leadership role · Experience with data trend analysis, vibration analysis, motor current analysis, oil analysis, lubrication and hydraulic testing, laser alignment, nondestructive testing, infrared thermography, ultrasound technology, acoustic reliability technology, Weibull analysis, and Six Sigma or Lean Manufacturing methodologies · Knowledge of various government regulations such as, Current Good Manufacturing Practice (cGMP), National Electrical Testing Association (NETA), Environmental Protection Agency (EPA), and Occupational Safety and Health Administration (OSHA) · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus · Self-awareness · Management & Leadership Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $50.96 - $65.19 USD ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ( ) ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. xevrcyc Revisión de la política de privacidad aquí here. ( )

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Are you passionate about transforming innovative ideas into real-world products? King Technology is seeking a talented Industrial Design Intern to join our dynamic team. In this role, you'll support the development of new consumer packaged goods by contributing your creativity, technical skills, and user-centered design thinking. Key Responsibilities Research & Analysis: Conduct market and consumer research to identify needs, trends, and opportunities. Concept Development: Generate creative and brand-aligned product concepts for our target audience. Sketching & Modeling: Produce detailed sketches and 3D models to visualize product ideas. Prototyping: Assist with prototype fabrication, including 3D printing, for testing and evaluation. User Testing: Collect and analyze consumer feedback to refine product designs and improve functionality. Qualifications Currently pursuing a degree in Industrial Design or a related field (sophomore-senior preferred). Strong skills in sketching, modeling, prototyping, and rendering. Proficiency with design tools such as Adobe Creative Suite and SolidWorks. Excellent problem-solving, communication, and collaboration abilities. A passion for consumer products and a desire to make a meaningful impact. Internship Benefits Full-time Summer 2026 internship (10-12 weeks, 40 hours/week). Hands-on experience in the consumer-packaged goods industry. Opportunity to work closely with experienced designers and engineers. Skill development and portfolio-building opportunities. The chance to contribute to the creation of innovative, real-world products. Compensation Competitive hourly rate: $20-$26, based on experience.

Preco is now hiring for a Full-Time Metrologist in Somerset, WI. The Metrologist is responsible for developing, optimizing, and maintaining precise measurement routines and systems that ensure product quality and conformance to specifications. This role involves creating turnkey CMM (PC-DMIS) and MicroVu measurement programs for production and inspection use, troubleshooting and improving existing routines, and collaborating with engineering. The position also supports critical quality functions such as First Article Inspections (FAIRs), capability studies, Gage R&R, and calibration activities. Preco is a leading designer and manufacturer of precision automated processing systems for high-speed and high-accuracy cutting, perforating, welding, and other specialized industrial processing applications. With our proprietary die cutting and laser-based manufacturing capabilities, Preco has also become one of the largest contract manufacturing service (CMS) providers in North America. Key Responsibilities: Create measurement routines on the CMM (PCDMIS) and MicroVu that are turnkey for production and inspectors. Troubleshoot and correct issues with current measurement routines. Lean out current measurement routines making them as efficient as possible. Eliminate waste of movement or unnecessary measurements on the CMM. Work with engineering to create robust fixturing to stage components and assemblies for measurement on the CMM and MicroVu. Perform First Article Inspections (FAIRs) on components and assemblies. Populate FAIR form along with a bubble numbered print of the current revision. Gather data for Gage R&R's, DOE's, and capability studies. Populate minitab with data for Engineering analysis. Review measurement data to ensure accuracy, consistency, and reliability. Identify and remeasure outlier data points. Author measurement procedures (MP's). Create measurement routines on the CMM for the calibration of production gages. Work with calibration to maintain measurement gages. Complete inspections for production as necessary. Provide technical support and advice to other departments or personnel. Train others on proper measuring equipment and measuring techniques. Collaborate with engineers to resolve measurement challenges. Perform any necessary equipment checks to ensure proper calibration and functionality prior to use. Maintain a clean, organized work area. Culture Development: Strong team player with excellent interpersonal skills; able to collaborate effectively and professionally with individuals across various roles and technical backgrounds. Committed to excellence and to serving others across all levels of the organization and beyond. Ability to work and be effective with minimal direct supervision. Strong analytical and problem-solving skills. Detail-oriented with a commitment to accuracy. Drive a positive and inclusive workplace culture. Adhere to all safety regulations and company policies. Job Qualifications: High School Diploma or equivalent. 5+ years of experience with CMM programming. Experience programming for complex parts. Ability to identify outliers and spot patterns in datasets. Strong computer skills, including proficiency in Microsoft Word and Excel. Preferred Qualifications 2-year Technical Degree in Quality or related field. Real-world application of PC-DMIS (Personal Computer Dimensional Measurement Interface Specification) is strongly desired. 5+ years of experience in machining, blueprint reading, and interpreting GD&T (Geometric Dimensioning and Tolerancing) is preferred Our dedicated staff keeps us at the leading edge of precision automated processing systems in our industry. When you work at Preco, you have the opportunity to apply your skills to create optimal solutions for our customers. We have a collaborative culture and a team united by a passion to provide solutions to our customers. Preco has partnered with Hueman for its recruitment needs. If you are interested in learning more about a career with Preco as a Metrologist, apply today!

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs entry to mid-level break-fix & preventative maintenance. This includes, but is not limited to: adjusting functional parts of devices and control instruments to sustain and improve operations; repairing or replacing defective parts; reconditioning or repairing machine tools. · Identifies needed parts, supplies, and repair items. · Provides support and back up for other members of the department as needed by leadership. · Is aware of Maintenance Industry Standards. · Assures compliance with 5S and housekeeping standards. · Participates in CI activities - processes, results, and cost savings. · May be required to set up and operate simple machining operations, including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform basic welding tasks. · Updates records and reviews CMMS history. · Performs basic troubleshooting of control systems circuitry. · Completes technical self-study programs for career development. · Follows all safety-related policies, rules, regulations, technical instructions, and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understanding of basic electrical and mechanical systems. Can perform repairs. · Must be able to use basic hand tools. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

Project Manager Windings, Inc. New Ulm, MN or Eden Prairie, MN Salary Description: $70,000 - $90,000 annual DOQ If you are interested in becoming an Employee Owner, read on... Windings Inc. is a 100% employee-owned company where every team member shares in our success. Since becoming an ESOP in 1998, we've proudly supported critical industries like Aerospace, Defense, Automotive, and Medical. Our unique ESOP benefits can contribute 10-12% of your annual earnings to your retirement-at no cost to you-helping your savings grow through compound interest. For over 60 years, Windings has provided critical custom motors and components for the harshest applications, including outer space, military, downhole drilling, and motor sports to name a few. If you like to take on the “tough stuff”, join us and be part of a forward-thinking, people-focused company driven by our purpos e: " Making our Customer's Critical Mission Possibl e." ***The Project Coordinator position is onsite and can sit in the New Ulm office or Eden Prairie, MN office. What you will be responsible for: The Project Coordinator is an exciting combination of a cross -functional, multi-project manager and a technical account manager working across all Winding's sites in North America. As a customer focused position, the Program Manager drives key development programs through engineering to production while managing all internal aspects of the customer experience. The Program Manager will be responsible for the following: Lead high complexity custom motor and generator projects across functions using structured program/project management techniques and a phase gate process to achieve quality, schedule/delivery, and cost targets. Act as the liaison between Winding's global customers and Winding's global manufacturing sites (Materials Control, Scheduling, Engineering, Quality, AP/AR, Sales, etc.) with responsibility for handling all sales, engineering and tooling orders, account questions, complaints, returns, and other general queries for assigned accounts. Understand, apply, and disseminate complex or ambiguous customer requirements into actionable project plans. Provide guidance to the organization related to project execution and customer requirements. Mitigate project risks based on knowledge and understanding of the manufacturing process and business acumen. Requirements What you will need: Education / Experience B.S. Degree in an applicable field (business management, engineering, or other) is preferred. Experience in lieu of degree will be considered. Project Management Training is required. PMP certification preferred Minimum of 3-5 years of applicable experience in an engineered product environment in Aerospace, Defense, Automotive, Medical Device, O&G or other technology field Proven track record of delivering project milestones related to cost, timeline, and quality. Knowledge / Skills Excellent interpersonal and communication skills are required for this position, including the ability to positively engage potential customers at any level in their organization in conversation in person and via phone and/or computer. Excellent organizational, decision-making skills and the ability to be self-motivated are required. Working knowledge of English (verbal and written) is required. Experience with one or more project management software tools is preferred. (MS Project, Asana, Monday.com, etc.) Strong financial acumen and the ability to use this knowledge to influence short- and long-term financial decisions of key projects, including capital expenditures is required Ability to document processes, process validations, qualifications, protocols, reports (technical and non-technical), and test methods is required An understanding of continuous improvement principles and methodologies is essential. Six Sigma or other problem-solving tools is preferred. Experience with risk identification, risk mitigation, and risk management related to project success is required. What you will get... An awesome employee-ownership culture Full benefits package (medical, dental, vision, disability, life and more) Paid time off 401k match and ESOP contributions Flexible work environment Education reimbursement This position is eligible to participate in a performance-based bonus program based on company performance goals. Bonus payouts are not guaranteed and are determined at the company's discretion. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; reach with hands and arms and talk or hear. The employee is frequently required to use hands and fingers to handle or feel; frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. The employee is regularly required to stand and walk. Specific vision ability by this job includes close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Other Requirements: Because employees in this position must handle information covered by the International Trade and Arms Regulations (ITAR) and/or Export Administration Regulations (EAR), successful applicants will be: (1) required to verify their identity and their status as a U.S. citizen or national, U.S. lawful permanent resident, or person granted refugee or asylee status (or equivalent) in the U.S.; OR (2) undergo additional steps, including but not limited to licensure from the Directorate of Defense Trade Controls (DDTC) in the Bureau of Political-Military Affairs at the U.S. Department of State and/or the Bureau of Industry and Security (BIS) at the U.S. Department of Commerce. Equal Opportunity Employer: Windings is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to age, sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected Veteran status. We are committed to providing a workplace free of any discrimination or harassment.

The Religious Conference Management Association (RCMA) has retained SearchWide Global to find a dynamic and visionary leader to serve as the new President & CEO to lead the organization to its next era of growth and impact. RCMA unites a diverse global community of faith-based meeting planners, hospitality suppliers, and industry partners, and the President & CEO will serve as the organization's chief ambassador, strategist, and relationship-builder. The successful candidate will be an accomplished executive with a deep appreciation for the faith-based community and a proven record of leadership within non-profit, association, hospitality, or meetings/event sectors. This individual will bring a collaborative style and the ability to work effectively with a dedicated board of directors, a talented team, and a membership representing a rich diversity of traditions and backgrounds. View the full position description HERE . If interested in learning more about this great opportunity, please apply or send your resume to the SearchWide Global Executive listed below. Contact: Kellie Henderson, Global Head of Destinations, ************************* #J-18808-Ljbffr

About the Company Palmer Hamilton, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other status protected by applicable federal, state, or local law. About the Role The Production Supervisor - Weld & Fabrication is responsible for leading and managing welding and fabrication operations to ensure production goals are met safely, efficiently, and within budget. This role oversees day-to-day shop floor activities, focusing on productivity, quality, and team development. The Production Supervisor will drive continuous improvement initiatives, uphold company safety standards, and foster a culture of collaboration and accountability. The ideal candidate will have strong leadership experience in welding and fabrication environments, a deep understanding of lean manufacturing principles, and the ability to motivate teams to achieve excellence in performance and quality. Responsibilities Lead daily operations of the Weld and Fabrication departments to meet or exceed production, quality, and safety goals. Analyze, interpret, and report on production statistics and departmental performance metrics. Develop, implement, and maintain cost reduction and process improvement initiatives to optimize efficiency. Oversee scheduling and staffing to meet production demands while ensuring proper utilization of resources. Ensure compliance with safety standards and participate in safety audits, training, and continuous improvement activities. Collaborate cross-functionally with engineering, maintenance, and quality teams to identify and resolve operational challenges. Supervise and coach production employees, including conducting performance reviews, addressing personnel issues, and fostering professional growth. Implement and sustain lean manufacturing, 5S, and other continuous improvement practices to enhance workflow and minimize waste. Maintain accurate production and labor records in accordance with company and regulatory standards. Conduct regular team meetings to review department goals, communicate updates, and address concerns. Support the implementation and maintenance of robotic welding, flat panel, and tube laser systems, ensuring optimal performance and uptime. Promote and model Palmer Hamilton's core values, including integrity, collaboration, and commitment to quality. Perform other duties as assigned to support plant operations and company objectives. Qualifications Education & Experience: Minimum of 7 to 10 years of manufacturing floor experience in MIG welding and fabrication, with proven success in a high-performance production environment. At least 5 years of supervisory experience in a manufacturing setting. Experience with robotic welding systems, flat panel, and tube laser equipment required. Required Skills Technical Skills: Proficient in Microsoft Office Suite (Word, Excel, Outlook) and experience with computer-integrated manufacturing systems. Strong understanding of lean manufacturing principles, 5S, and continuous improvement methodologies. Ability to analyze production data and implement data-driven solutions. Leadership Skills: Excellent communication, interpersonal, and team-building abilities. Proven capability to motivate, train, and lead diverse teams toward operational goals. Strong organizational and problem-solving skills with the ability to manage multiple priorities. Other Requirements: Demonstrated commitment to workplace safety and quality assurance. Ability to make sound decisions in a fast-paced production environment. Must exhibit integrity, professionalism, and the ability to act as a role model for others. Work Environment This position operates primarily on the manufacturing floor in a fast-paced environment with exposure to machinery, welding operations, heat, and noise. Appropriate personal protective equipment (PPE) must be worn at all times. Occasional office work is required for reporting and meetings. Equal Opportunity Statement Palmer Hamilton, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other status protected by applicable federal, state, or local law.

About Us: Bernick's is a 5th generation family-owned provider of beverages, vending and food solutions, representing leading brands such as Pepsi, Dr Pepper, Miller Brewing Company and New England Coffee. We service locations in greater MN and western WI. Job Summary: Our Account Representatives cover an individualized route of various accounts and are responsible for supporting our customers, managing inventory, placing product orders, and assisting with merchandising. Responsibilities: * Merchandise store shelving, coolers and displays with products in assigned accounts * Display promotional material such as signs and banners in accounts * Placing product orders for customer accounts * Communicate the benefits of our products in order to drive sales Hours: Full-time (40 hours per week) * 5:00AM-7:00AM - completion * Monday-Friday schedule with alternating weekends. Weekend shifts are balanced with weekday time off * Have a valid driver's license; driving record which meets Bernick's standard * Have a reliable, insured form of transportation to be used while working (mileage reimbursement at 59 cents per mile, from the first to the last stop) * Regularly lift and move product weighing 50-100 pounds * Repetitively bend, lift, twist while moving product about

About Us: Bernick's is a 5th generation family-owned provider of beverages, vending and food solutions, representing leading brands such as Pepsi, Dr Pepper, Miller Brewing Company and New England Coffee. We service locations in greater MN and western WI. Job Summary: Delivery Supervisors are responsible for managing a Team of Drivers, while overseeing the transportation and delivery of Bernick's beverage products Responsibilities: * Be the point of contact for assigned Drivers and provide effective communication to teams * Supervise and support daily delivery operations to ensure timely, accurate, and safe deliveries * Monitor driver performance, including on-time delivery, route compliance, and customer feedback * Plan and assign delivery routes, adjusting schedules as needed to meet customer demands and efficiency goals * Lead, train, and mentor delivery drivers to meet performance, safety, and customer service standards * Manage and approve driver timecards, attendance, and compliance documentation * Handle customer concerns related to delivery issues promptly and professionally Requirements: * Have 3-5 years of experience in Transportation and Logistics * Have a valid Class A Driver's License; driving record which meets Bernick's standard (or willing to obtain 1) * Can lift and move product weighing 50-165 pounds * Are able to bend, lift, twist, while moving product off the truck * Previous supervisory experience preferred

Title: District Manager Reports To: Regional Manager Department: Field Salary Exempt About DMG: Divisions Maintenance Group provides facility maintenance services to retail chains and distribution and fulfillment centers across the country. We are leading the way with our technology, creating world-class products that are revolutionizing the industry and fulfilling our brand promise of “Uninterrupted Peace of Mind.” DMG is a Certified Great Place to Work with a strong, inclusive culture and top-notch benefits. Job Summary: In an assigned district, the District Manager works with the National Field Team and National Account Management Teams to manage accounts, ensure continued business, and increase penetration of key accounts. You will be responsible for sourcing, vetting, and managing provider and technician base. You will perform regular inspections and visits to customers in support of maintenance contracts, as well as creating opportunities for additional business. Work in coordination with Regional Manager to maintain and win new business in outlying areas at target revenue goals while maintaining high quality services. The District Manager supports all aspects of the management process to ensure consistent achievement of short and long-term goals in the mission statement based on our core values. This position has budgetary responsibilities. What You'll Do: Work closely with the Regional Manager and National Account Management Teams to establish and maintain corporate accounts in a district. Make regular visits to corporate customers in support of maintenance contracts and perform site inspection property audits, with an eye toward the opportunity to add on services. Work to build relationships with customers, providers, and technicians in an assigned district. Source, vet, and manage provider and technician base, ensuring quality delivery of services. Must respond with a sense of urgency to escalations and customer requests. Manage time to accomplish set KPIs, including an assigned weekly goal of scheduled visits as well as meeting and exceeding the incremental revenue expectations. Provide key market information and contribute to DMG's long and short-term strategies. Own RFP initiatives while negotiating with providers to secure target financial goals. Manage district and travel expenses within or below budget. What You Need: Bachelors degree preferred and/or relative experience; HS Diploma or GED required. Strong working knowledge of Microsoft Office applications - Excel, Word, PowerPoint, and Outlook. Embrace technology - experience using smart applications like an iPad or iPhone is a plus. Preferred experience with CRM software. Valid Driver's License; must provide own vehicle. Possess and demonstrate a proactive, entrepreneurial work style; able to work independently. Strong ability to think strategically and creatively. Enthusiastic, dynamic, and has a positive, extroverted, engaging personality. Prefer to interact with customers and providers, and is unafraid of rejection. Able to meet position demands: Significant on-site activity required (90%), extensive outdoor activity while performing site audits or managing natural disasters, extended hours required during peak workloads or special projects, expectation to be able to adjust travel and schedule frequently to respond to opportunities or customer requests Ability to manage the stress of a fast-paced environment. Ability to meet the in-person requirements of the team and/or business needs. What You'll Get: At DMG, you'll be part of an amazing team that encourages learning, growth, and advancement. Our company has an entrepreneurial spirit that rewards self-starters and encourages employees to take charge of their own careers. Some of our many benefits include: Health, dental and vision coverage on day 1. Dollar-for-dollar 401K match up to 4% of salary with immediate 100% vesting. Paid Primary and Secondary Caregiver leave. Employee Assistance Program to assist with everyday challenges. Paid time off to volunteer. Divisions Maintenance Group is an equal opportunity employer.

What You'll Do: Provides electrical design, development, and programming based on approved P&ID (Piping & Instrumentation Diagram) conferring with Team members and management, as necessary. Provides solid technical knowledge of automation technologies including sensors, controllers, actuators and industrial networks. Supports the design, programming, maintenance, repair and troubleshooting of high-speed centrifuges, as well as automated manufacturing systems and equipment at the GEA Janesville facility or customer sites. Understands the theory and applications of fluid power, electrical and mechanical technologies, and programmable logic controllers.. Use a variety of computer-based and electronically controlled systems in process and manufacturing environments. Learn skills necessary to program, assemble, install, troubleshoot, repair, and modify machine instrumentation and controls. Able to measure voltage, current, resistance for single and three phase alternating current and direct current (AC/DC) sources. Apply math to calculate electrical power equation pertinent to the maintenance field. Understands electrical control panel and machinery safety standards (UL 508A, NEC, NFPA). Able to interpret and modify engineering drawings for electrical control panels as well as P&ID (Piping & Instrumentation Diagram). Responsible for the installation and technical support of PLC based hardware and software. Assist in the supervision/training of in-house technical personnel as well as customer plant personnel in repairing, overhauling, installing, testing, and inspecting mechanical and electromechanical equipment. Reviews reports of production, malfunction, and maintenance to determine or address problems. Provides electrical and controls support to customers and GEA personnel as needed, including troubleshooting, and hardware/software modifications. Maintain and update electrical schematics, engineering drawings for production, and technical documentation for new and existent equipment. Familiarity with process controls, motor controls, instrumentation, automation principles, and industrial networking. Has knowledge of commonly used concepts, practices, and procedures utilized in machine control systems. Familiarity with Programmable Logic Controllers (PLC), Human machine Interfaces (HMI) and Variable Frequency Drives (VFDs). Able to troubleshoots and accomplishes minor program changes with these devices as well. On site customer support/start-up. What you bring: Associate degree or equivalent in Electro-Mechanical Technology Minimum 2 years of relevant hands-on experience Strong analytical and problem-solving skills Comfort working with AC/DC systems and 3-phase power Proficiency in interpreting engineering drawings and schematics Familiarity with control systems, process automation, and industrial networking Experience with PLCs, HMIs, and VFDs Ability to travel up to 40% across the U.S. and Canada The typical base pay range for this position at the start of employment is expected to be between $30 - $35/hour. GEA Group has different base pay ranges for different work locations within the United States. The pay range is not a guarantee of compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. GEA is an equal opportunity employer. Applicants will therefore receive consideration for employment without regard to age, sex, race, color, religion, world view, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities are welcome and will be given special consideration if they are equally qualified. Please note: This position is based in the United States and does not offer visa or work sponsorship. Applicants must be authorized to work in the U.S. without current or future sponsorship.

About Us: Bernick's is a 5th generation family-owned provider of beverages, vending and food solutions, representing leading brands such as Pepsi, Dr Pepper, Miller Brewing Company and New England Coffee. We service locations in greater MN and western WI. Job Summary: Sales Representatives sell in Bernick's top brands and product promotions in customer accounts. For each assigned route, they build and maintain professional business relations and strive to be the preferred beverage provider to our customers. Responsibilities: * Sell and promote Bernick's portfolio of leading brands * Meet individual goals and team sales objectives * Build professional relationships with all customer accounts * Provide exceptional customer service and first class execution * Effectively communicate with Sales Team Members, Distribution, and customers Hours: Full-time * Monday - Friday, 7:00AM - completion * Hours may vary with the benefits and challenges that come with the beverage industry * Demonstrate effective time management skills * Ability to work independently and adapt to changing routes/schedules * Must be 21 years of age * Have a Valid Driver's License and driving record which meet Bernick's standards * Ability to lift and move product weighing up to 50 pounds * Sales or merchandising experience is a plus

Commercial Interiors Manufacturing - Assistant Project Manager We're looking for an Assistant Project Manager to support projects from design through fabrication, delivery and installation of commercial interior products (millwork, casework, fixtures, or custom components). This role coordinates schedules, materials, documentation, and communication between drafting, production, procurement, and our customers. Responsibilities Manage project documentation, drawings, and revisions Prepare and update schedules including tracking critical milestones such as material approvals, fabrication start dates, and delivery deadlines Organize samples, finishes, and customer approvals Maintain accurate project data in our ERP system (Epicor/Innergy) Track revisions and ensure updated information is shared with teammates Support punch list resolution, shipment coordination, and project closeout Communicate project status, risks, and upcoming needs to internal stakeholders and customers Qualifications Bachelor's degree in construction management or related field preferred 3+ years in manufacturing or commercial interiors project coordination Strong organizational and communication skills Proficiency with Excel/Outlook; ERP experience preferred

About Us: Bernick's is a 5th generation family-owned provider of beverages, vending and food solutions, representing leading brands such as Pepsi, Dr Pepper, Miller Brewing Company and New England Coffee. We service locations in greater MN and western WI. Job Summary: In this role, you will be responsible for diagnosing and repairing mechanical, electrical, and other vehicle issues, as well as performing regular maintenance to ensure our fleet operates safely and efficiently. Responsibilities: * Diagnose and repair a variety of vehicles and equipment, including two-wheel carts, sales cars, service vans, and primarily tractors and trailers with liftgates * Work closely with our load crew to ensure sufficient trucks and trailers are available for daily routes * Manage and track parts usage, whether from stocked inventory or outsourced vendors, and accurately charge them to the appropriate work tickets * Maintain accountability for direct and indirect labor hours to track daily and weekly productivity Hours: Full-time (40 hours per week) * Monday-Friday * 9:00AM-5:30PM * Associate's degree or technical certificate in a related field, or 2+ years of relevant work experience * Valid driver's license with a driving record that meets Bernick's standards (CDL preferred, but we're willing to train) * DOT inspection certification preferred (training available if needed) * Availability for on-call responsibilities * Experience with forklifts, material handling, or in a warehouse environment is a plus * Strong time-management and prioritization skills * Ability to work independently with minimal supervision * Basic arithmetic and computer skills * Comfort with reading instructions and completing routine reports

About Us: Bernick's is a 5th generation family-owned provider of beverages, vending and food solutions, representing leading brands such as Pepsi, Dr Pepper, Miller Brewing Company and New England Coffee. We service locations in greater MN and western WI. Job Summary: The Senior Key Account Manager leads key retail customer relationships and drives profitable growth across Bernick's. This role manages a team of Account Managers, owns executive-level customer partnerships, and collaborates cross-functionally to develop strategic account plans, forecasts, pricing, and category growth initiatives aligned with business objectives. Responsibilities: * Manage, coach, and develop a team of Account Managers to ensure consistent execution of account strategies and customer commitments * Align Account Managers with Sales Managers, distribution teams, and cross-functional partners to drive results * Serve as the lead for designated strategic Key Accounts, owning the overall customer relationship, strategy, and financial performance * Lead solution development efforts by coordinating sales, service, supplier, and executive resources * Establish and maintain strong, professional relationships with director- and executive-level customer stakeholders and supplier partners * Lead regular customer business reviews to communicate progress against goals, promotion results, financial performance, and forward-looking strategies * Coordinate the development of monthly and quarterly sales forecasts for retail national account customers * Track, measure, and communicate execution of initiatives and programs, highlighting successes and proactively addressing gaps HOURS: Full-time * Monday-Friday, 8:00AM-5:00PM Requirements: * Bachelor's degree in Business, Marketing, Finance, or a related field preferred * 8+ years of progressive experience in key account management, retail sales, or national account leadership * 3+ years of people leadership experience managing and developing sales or account management teams * Proven success managing complex retail accounts with significant revenue and margin responsibility * Strong working knowledge of sales forecasting and demand planning, with the ability to translate insights into actionable strategies * Advanced proficiency in Excel, sales analytics and reporting tools, CRM systems, and Microsoft Office Suite * Must be at least 21 years old and hold a valid driver's license with required insurance, adhering to Bernick's driving standards