BlackHawk Industrial jobs in Indianapolis, IN

BECOME A US FOODS DRIVER!Ready to build a career with a company that's leading the foodservice industry?Schedule: Monday - Friday 2:30am 6am start time May occasionally have an over night shift Our delivery drivers start at $31.23 hour. After completion of probation period, wage increases to $33.73 hour! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job Safely drive trucks to customers and meet scheduled customer delivery times Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas Verify accuracy of delivery with customers and obtain proper signatures Handle collections and payments from customers when applicable Professionally perform customer service responsibilities to enhance our client experience Perform all pre-trip and post-trip equipment inspection Physical Requirements Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during each shift required Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table Register to the FMCSA Clearinghouse* Must be at least 21 years of age Must have valid CDL Class A issued by the state of legal residence with necessary endorsements and DOT qualifications Minimum of six months commercial driving experience (any industry) OR three months commercial driving experience in the food and/or beverage delivery industry required Ability to operate manual transmission preferred; may be required in specific locations Must be able to read and communicate in the English language - able to hold a conversation, to understand highway traffic signs and signals, to respond to official inquiries, and to enter information on reports and records. Why US Foods US Foods helps our customers Make It , with products and services that shape the communities where we live and work. Opportunities in our company abound for skilled, forward-thinking associates. Great drivers are crucial to the US Foods team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. At US Foods , we are committed to Total Rewards that respect and reward our associates for their dedication and hard work. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $31.23 and $33.73 Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ********************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page.

Troy Center is hiring an in-person MDS Coordinator in Troy, NY. Completing accurate assessments, MDS & care plans as assigned Initiating care plans and supporting activities as assigned Creating and distributing monthly care plan calendars in a timely fashion Maintaining & updating all care plans and assessments as required Monitoring & auditing clinical records, ensuring accuracy & timeliness Informing DON of persistent issues related to non-compliant documentation Protecting the confidentiality of Resident & Facility information at all times REQUIREMENTS: MUST HAVE PRIOR MDS 3.0 EXPERIENCE Valid New York RN License Long Term Care Experience Required! Must be highly organized, professional & motivated Should have solid computer skills Excellent communication skills Should be friendly and a team worker About us: Troy Center for Rehabilitation and Nursing is an 80-bed rehabilitation and skilled nursing facility located in the South Troy section of the city, minutes away from the eastern bank of the Hudson River. It's a homey, welcoming, well-maintained facility, providing a warm and nurturing environment. Our staff is committed to ensuring the highest quality of life for all our residents, helping each to get stronger, healthier, and happier. We want all residents to leave Troy Center with dignity and independence. Troy Center is a proud member of the Centers Health Care Consortium. Equal Opportunity Employer -M/F/D/V

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Professional Sales Person to join our family. As a Team Partner in the Sales Department, you will be developing new business for UniFirst First Aid retail marketing through high-level selling skills. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances their performance and assists them with their career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, we love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Sell and promote First Aid products to new accounts with 75 employees or more and/or multiple locations. Develop new business and penetrate accounts further to sell additional lines with the priority as first aid, facility services, and safety products. Meet new customer needs with products that will help provide a safe, pleasant, and productive workplace. Lead 411 as another tool to grow your prospect hopper. Organize and implement a “work plan' for maximizing daily sales and decreasing mileage between calls. Maintain a call average that is consistent with current company objectives. Promote growth by continuously setting appointments, making cold calls, and gaining referrals for new business. Participate and execute information provided from sales meetings. Submit work orders, paperwork and expense reports as required. Keep paper-flow consistent by ensuring accuracy. Communicate with the local Sales Manager, Territory Manager and the Regional Sales Manager with all pertinent information for any new accounts. Keep abreast of all price changes and sell accordingly. Maintain a prospect database of all accounts being developed. Participate in periodic promotions. Ensure that personal vehicle used for company business is clean, organized, and properly maintained. Adhere to company policies as outlined in the UniFirst Employee handbook and the Green Guard Field Manual. Keep up to date about competitive companies, their products, and prices. Share pertinent information about pricing and products with other employees during sales meetings. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED equivalent is required. Must be 18 years of age or older. Valid driver's license and safe driving record are required. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards. Two years of business to business selling experience is required. High-level selling skill including strong prospecting and closing skills. Knowledge and exceptional sales experience. Ability to be resourceful. Ability to lift up to 30 lbs. Individuals who drive their personal vehicles for business purposes will be required to comply with minimum auto insurance requirements per UniFirst's standards About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

This is a hybrid role with 50% on-site requirement in Wilmington, MA. We are seeking a highly analytical, self-driven Senior Financial Analyst to join our FP&A team. This role provides broad visibility across the business and requires strong ownership, curiosity, and the ability to thrive in a fast-paced environment. The ideal candidate combines financial experience with the ability to turn data into insights and influence decisions. You will partner closely with senior leadership and cross-functional teams to lead budgeting, analyze performance, and communicate key financial and operational trends. Success in this role requires driving deep into business, challenging assumptions, identifying risks and opportunities, and delivering forward-looking insights that drive results. Responsibilities: The selected candidate will be able to perform the following duties with or without a reasonable accommodation: Business & Financial Analysis Analyze monthly financial results, investigate trends and anomalies, and clearly communicate key performance drivers, risks, opportunities, and recommendations to finance and business leadership. Own portions of the annual budgeting, forecasting, and long-range planning processes. Develop and enhance financial reporting and dashboards that drive business decisions. Business Partnership & Decision Support Build strong relationships with regional and functional leaders across operations, sales, service and other areas. Partner with business leaders to support strategic initiatives and business cases with sound financial analysis. Communicate insights clearly and confidently to senior leadership in both written and verbal formats. Reporting & Modeling Participate in the preparation of the timely and accurate P&L and KPI reporting packages. Support ongoing and ad hoc reporting and analysis requests with a continuous improvement mindset. Develop and maintain financial models to support scenario analysis, forecasting, and strategic planning. Ownership & Initiative Learn the drivers of the business to deepen insights into financial results and future performance. Manage multiple priorities efficiently with minimal direction, while maintaining accountability for quality and deadlines. Continuously look for ways to streamline processes, improve reporting, and drive better decision-making. Qualifications Bachelor's Degree in Finance or Accounting, Economics, or related field. Advanced Excel and financial modeling skills. 5+ years of progressive financial analysis or FP&A experience. Strong analytical and problem-solving abilities with a high level of accuracy, attention to detail, and intellectual curiosity. Proven experience working independently, managing projects, and driving results with minimal supervision. Excellent communication and storytelling skills, including the ability to translate complex data into clear insights. Strong interpersonal skills with demonstrated success building relationships across all levels of the organization. Working knowledge of U.S.GAAP or core accounting principles. Preferred Experience with Oracle EPM, Hyperion, Smart View, Essbase, or similar applications. Experience with SQL querying. Experience with Power BI, Tableau, and/or other data visualization tools. MBA,CPA, CFA or similar advanced credential. Experience supporting senior leadership in a fast-paced, matrixed environment. The estimated annual salary for this position ranges from $82,500- $110,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. UniFirst offers a Fleet of Benefits, 50+ to be exact! 401K with Company Match Profit Sharing Health Insurance Employee Assistance Program Life Insurance Supplemental Life Insurance Long Term Disability Vacation Sick Time Paid Holidays Direct Payroll Deposit Tuition Reimbursement 30% Employee Discount Employee Referral Program Where will a UniFirst Career take you? As an industry leader in the rental, lease and sale of uniforms and facility services products, UniFirst Corporation has grown to become one of the largest companies in the garment services industry. UniFirst is recognized on the Forbes “Platinum 400 - Best Big Companies” List. With over 14,000 employee Team Partners and more than 250 facilities throughout the United States, Canada, Mexico and Europe, you are never just a number when you work for UniFirst. What sets us apart from all other companies is that we still function as a family run business. When you work for UniFirst, you're family! UniFirst Corporation has a strong history of promoting from within. In fact, most of UniFirst's Senior Managers have come from within the Company. Opportunities are endless for those individuals who possess a strong work ethic, a commitment to quality, and above all else, a passion for delivering quality customer service, both internally and externally. Our culture is what makes UniFirst an organization that stands out from the rest. Are you interested in loving your job? Find out just how far a career with UniFirst can take you. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26773 Job Responsibilities We are seeking a highly skilled Senior CMM Programmer to join our innovative manufacturing team. In this pivotal role, you will be instrumental in developing and optimizing complex coordinate measuring machine (CMM) programs to ensure precision and quality in our manufacturing processes. You will leverage your extensive expertise in metrology to drive product excellence and contribute to our mission of delivering top-tier solutions. In addition to performing the calibration of the coordinate measuring machine, you will also use precise measurement tools, such as calipers and micrometers, to ensure our products meet our customer and internal standards. Applicants need to be able to read blueprints and interpret GD&T (geometric dimensioning and tolerancing) symbols, so some technical training or professional experience is preferred. What You Will Do Interpret internal and customer engineering drawings to determine inspection requirements. Create and edit CMM programs to support part inspection and validation. Perform CMM setups, including managing multiple setups simultaneously and optimizing table space. Select appropriate measuring instruments based on blueprint specifications. Execute dimensional inspections using CMM programs and manual measurement tools. Apply GD&T principles to conduct detailed part inspections. Ensure inspection programs align with part numbers and revision levels. Complete dimensional reports for PPAP and AS9102 submissions. Conduct first article, in-process, and final inspections using hand gauges and measurement systems. Perform incoming goods inspections as needed. Accurately log and maintain inspection data for traceability and reporting. Support and uphold AS9100 quality objectives and procedures. Identify and segregate non-conforming parts, ensuring proper labeling and documentation. Maintain high standards of workmanship using only approved data, materials, and tools. Problem-Solving & Communication Skills Use analytical skills to identify product issues, determine root causes, and implement corrective actions. Troubleshoot defects and verify the effectiveness of repairs. Proactively address production delays by identifying causes and proposing preventive solutions. Communicate inspection findings clearly to team members and management. Collaborate effectively within cross-functional teams to support continuous improvement. Education and Experience Required High school diploma/GED, prior certification as a PC-DMIS CMM Programmer, OR equivalent work experience. 3+ years of relevant experience. Proven experience in CMM programming (PC-DMIS and/or Verisurf). Strong understanding of metrology and dimensional inspection techniques. Ability to read and interpret blueprints and GD&T symbols. Technical training or equivalent professional experience in a manufacturing or quality control environment. Experience with flight hardware is a must. Working knowledge of AS9100, AS9102, AS13100, ISO 9001, and other relevant quality standards. Must have strong computer skills, including Microsoft Office and databases. Ability to work independently and manage multiple priorities. Job Requirements PHYSICAL DEMANDS The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. EXPORT CONTROL DISCLAIMER This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals as whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status, or disability. HARASSMENT POLICY The Lincoln Electric Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Baker Industries' employees to perform their job duties may result in discipline up to and including discharge. ATTENTION: THIRD-PARTY RECRUITERS Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER This job description may not include all assigned duties, responsibilities, or aspects of the job described, and may be modified at any time at the Employer's sole discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26071 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): • Determine the best method to manage and complete a project by a designated due date. • Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. • Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. • List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. • Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. • Coordinate work assigned through various auxiliary work centers and equipment as required • Occasionally assist operators and maintenance with machine or processing issues. • Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. • Effectively communicate with other personnel and educate apprentices in best practices. • Adhere to all written specifications and ensure compliance with all standards. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: • Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. • Must pass the skilled trades assessment test for this position • Proficiently operate all common machining equipment, mills, lathes, grinders, etc. • Work as a team lead as well as a team member depending on the departmental workload. • Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. • Time management skills and the ability to work to deadlines in a fast-paced environment. • Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. • Work from design prints, sketches, sample parts and oral instructions. • Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. • Personally possess basic inspection and machining tools to effectively perform job. • Available to work second shift, overtime and weekends as required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Employment Status: Hourly Full-Time Function: Maintenance Req ID: 26434 PURPOSE: Move, build, install, and demolish electrical panels, equipment, and power and network services. Primarily 1st shift schedule could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Construction Electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES) Performs all tasks under general supervision. Provides training and assistance to less experienced Electricians. Build electrical panels and test panels for production equipment to print. Performs installations and demolition on buildings, mechanical equipment and utility systems using one or more trade skills (e.g., electrical, mechanical). Maintains current knowledge of all applicable procedures and safety measures. Installs and replaces electrical circuits, equipment and appliances, using hand tools and testing instruments, to supply electrical power for lighting, equipment, and machine operations. Provide power and control wiring for new equipment installations and equipment upgrades. Assist in commissioning of newly installed or upgraded equipment. Responsible for safely demolishing unused equipment and services. Oversee construction contract and service work as assigned. Order construction material as required. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS Must have successfully completed an Electrician Apprentice Program, an Associate degree in Electronics/Electrical Technology or have equivalent job experience. Must pass the skilled trade assessment for this position. Must have a basic level of knowledge and experience reading wiring diagrams and engineering drawings. Must have a basic level of knowledge and experience in panel installation and wiring practices. Must have a basic level of knowledge and experience in proper conduit materials, methods, and installation. Must have a basic level of knowledge in the National Electrical Code (NEC) Ability to use various measuring devices (multi-meter, tape measure, levels, plumb bobs, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $38.00/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Daily Engagement of workforce through direction of work assignments, compensation, communication, recognition, development and coaching, etc... Manage the workflow process associated with electronics and some electromechanical areas of the facility, including the ASRS system Develop preventative maintenance procedures to maintain equipment associated with electronics and limited electromechanical equipment throughout the facility; including the management of parts inventory and corrective actions Manage safety culture through training and observations Liaison to contractors and Utilities department for projects and work orders Develop and update PLC and HMI programs as required based on established guidelines and controls for this type of equipment Ensure compliance of our measuring devices (i.e. Packers and Stockyards and Nebraska Department of Weights and Measures) Responsible for department budget, including labor and operating expenses Required Qualifications Legal to work in the US without the need of a Visa sponsorship Must be 18 years or older 2 year degree or better in electrical or electromechanical technologies or 3 years of experience with industrial process controls and industrial networking Competency in basic electrical 24 and 120 volt AC and DC circuits Basic knowledge of Windows XP/7 operating systems Ability to read, write and speak English Preferred Qualifications Experience in food processing environment Proficient in Allen-Bradley PLC Programming and troubleshooting, RsLogix 500/Control Logix 5000, Factory Talk View Install and trouble shoot Industrial Networks- Ethernet base and components Ability to read and interpret schematics, general machine installation and repairs Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: ($68,300.00 - $109,300.00) Target Bonus: % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

This position will support the Commission Department and report to the Sales Commission Supervisor. The ideal candidate will be very organized with an analytical mindset and attention to detail. Strong Excel knowledge along with the ability to multi-task. This position will research, verify, and validate that all sales credit and commission payout comply with Corporate Policy and Compensation Plans. Review sales commissions for accuracy and compliance to Corporate Policy and Compensation Plans Work directly with Sales Managers and/or Location Managers to resolve any issues Analyze credit and commission data on a weekly basis to provide forecast models and various reports Calculate qualifying sales for monthly commission payout Meet deadlines in timely manner Perform account reconciliations as needed Ensure all supporting backup is verified to accurately payout commissions Utilize multiple databases to ensure accuracy of commissions Respond to sales inquiries in a timely manner Excellent written and verbal communication skills Organized, strong follow up skills Able to work independently and exercise discretion Attention to detail Other duties as needed Qualifications Experience: Strong Microsoft Excel abilities (pivot table, vlookups) Familiarity with the AS/400 system is a plus Accounting background a plus Education: Bachelor's Degree preferred Additional Requirements: Able to multi-task while meeting deadlines. Must be accurate with numbers. Work independently and exercise discretion. The estimated annual salary for this position ranges from $58,000 to $62,000. Actual compensation will vary based on factors including but not limited to the candidate's skills, experience, and qualifications. Geographic differentials may also apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Company: US3090 Sygma Illinois (The Sygma Network, Inc) Sales Territory: None Zip Code: 61834 Travel Percentage: 0 Compensation Range: $10.00 - $48.00 The compensation range provided is in compliance with state specific laws. Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors. You may be eligible to participate in the Company's Incentive Plan. BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* Are you looking for a place to call home? Stability? A Career? Come join the SYGMA Danville, IL Team and get paid what you're worth. Our Delivery Drivers run 2-4 routes per week, and average $94-97K per year. At SYGMA we value our people and take pride in offering our customers the best service in the industry. We place an emphasis on teamwork and are known for developing our top internal talent. Offering Paid Training and Top Earning potential. Our Formula to Success is simple Route Pay + Bonuses = SYGMA Top Dollars. JOB SUMMARY To serve our customers by safely and efficiently transporting products from the warehouse by driving a tractor trailer to various customers and properly delivering and unloading products according to customer invoices and company standards. Top Earners Make Up to $180,000! Highly Maintained Equipment - all automatics 10 Paid Holidays! Medical, Dental and Vision Insurance Benefits active on the 1st of the month after 31 days of employment. 401k and Sysco Stock Purchase Plan Drive both team and single routes Evening Dispatch, Sunday - Friday The More You Drive; The More You Earn! RESPONSIBILITIES: Unloads product from trailer, by hand or using a hand cart down ramps, stairs, or docks, in all weather conditions and places in designated customer storage areas according to customer specifications and company standards (e.g., handling product according to preferred work methods, scanning product as it is delivered into the store). Ensures all paperwork is completed according to established company and governmental guidelines (e.g., DOT electronic or manual logs, inspections, company vehicle maintenance reports and pre- and post-trip reports are completed accurately and submitted on a timely basis, ensures all invoices are accurate and turned in daily and all damages and shortages are reported promptly). Ensures all food safety protocols are met according to established guidelines (e.g., proper temperatures are maintained in the delivery vehicle, product is inspected for visible damages prior to delivery, product is delivered and stored to prevent cross contamination) and maintains sanitary conditions in tractor and trailer; assists with maintaining sanitary conditions in the warehouse and yard. Develops and establishes good relationships with customers by providing excellent and courteous service with clear communication. Other duties as assigned by Management. REQUIRED MINIMUM EDUCATION/EXPERIENCE: High school diploma/GED/equivalent degree, plus 1 year of tractor trailer driving experience preferred. Completion of a tractor trailer driving school will be accepted instead of, or in addition to a high school diploma. CERTIFICATIONS AND/OR TECHNICAL REQUIREMENTS: Valid Class A Commercial Driver's License. Must be insurable to operate a vehicle as a condition of initial and continued employment. KNOWLEDGE, SKILLS, AND ABILITIES: Knowledge of: DOT regulations; Hazmat guidelines; Safe lifting and delivery practices. Skill in: driving over long distances, over a variety of terrains and in varying weather conditions, communicating with customers; solving problems; delivering products. Ability to: drive a tractor-trailer unit both in the day and at night, remain alert and aware of surroundings; meet or exceed minimum productivity levels established by the Company; handle hazardous materials and food and restaurant items that are frozen, dry and refrigerated; operate a 3 axle tractor, 45' - 48' trailer, straight truck, on board computer, key pad and a 2 wheel hand cart Perform basic math functions (e.g. add, subtract, multiply, divide); effectively plan and organize work activities independent of direct supervision; solve problems. Ability to read and speak the English language sufficiently to converse with the general public, to understand highway traffic signs and signals in the English language, to respond to official inquiries, and to make entries on reports and records PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to sit, talk, and hear. The associate is frequently required to lift, push, or move product that weighs up to 50 pounds by hand and push/pull up to 250 pounds of product with a 2-wheeled hand cart down a ramp and into the customer's storage areas; climb in and out of a tractor and trailer; reach to stack and unstack pallets and hand cart; bend and twist while loading and unloading product, and retrieving items from trailer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an associate encounter while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate usually works an overnight schedule, including weekends, holidays, overtime, on-call and starting at various times are required to successfully meet customers' needs. The associate is occasionally exposed to high, precarious places, fumes, or airborne particles. The noise level in the work environment is usually moderate. Overtime hours, working weekends and holidays, and starting at various start times are required to successfully meet customers' needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job-related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This supersedes prior s. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* HOW WE PROTECT OUR ASSOCIATES COVID-19 Precaution(s): Personal protective equipment and masks provided Temperature screenings Social distancing guidelines in place Sanitizing, disinfecting, and cleaning procedures in place OVERVIEW: Sysco is the global leader in foodservice distribution. With over 57,000 associates and a fleet of over 13,000 vehicles, Sysco operates approximately 326 distribution facilities worldwide and serves more than 625,000 customer locations. We offer our associates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates. OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$29.00 Target Bonus: 5.0% Req ID: 26396 Job Responsibilities Take direction from Leader and/or Supervisor Provide training and assistance to new employees. Provide feedback on job status to Electric/Pneumatic Assembly Supervisor. Assist in start-up/de-bug of equipment. Assure good craftsmanship on jobs that are being built. Follow and enforce good housekeeping practices with all department personnel. Know and understand due dates for jobs and schedule work accordingly. Work with Controls Engineers to correct any problems with design of the machine/controls. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Follow-up with supervisor on daily basis to report progress of job(s) being worked on.. Recommend, initiate, or follow-up on engineering changes and document according to procedure(s). Assist in packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with Receiving when required. Must know how to read and interpret build prints. Job Requirements Education: High School Diploma required. Journeyman's card or Journeyman status preferred Experience: 5 years minimum experience as industrial pipefitter Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Planning Manager is responsible for overall site production operations. Creates a work environment which promotes safety, quality, delivery, and cost-effectiveness. Effectively develops teams that can achieve corporate improvement objectives. Accountable for all aspects of plant production performance while ensuring objectives are attained in a cost-effective manner. Drives best practices through the organization and leads process improvement. Why work at MCC: Comp: $85,000-100,000k/yr This is a Dayshift Position Generous benefits package including medical, dental, vision, disability, life insurance and 401(k) Paid Holidays: New Years, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating holidays Responsibilities: Directly, and through delegation, coordinates activities required to assure safety, quality, delivery, and cost meet specified targets. Assures the compliance of behavior-based safety initiatives and continuously improves safety performance. Executes quality control plans for compliance to standards and drives variation reduction within the process. Assesses on-time delivery performance and develops actions to improve and sustain high level of performance. Holds direct responsibility for managing cost by effective management of labor, overtime, and expenditures. Determine staffing requirements weekly and re-deploy resources during the week as needed to address any shifting staffing needs or changes in priorities and scheduling. Reviews and analyzes production reports to determine root causes of variance from budget, and develops and executes corrective actions, using structured root cause analysis, MDI and Policy Deployment methodologies. Using Lean principles, form teams and involve people to improve productivity, decrease lead times, reduce waste and attain customer quality requirements. Reviews and analyzes production reports to determine root causes of variance from budget and develops and executes corrective actions. Recommend and initiate cost reduction programs centered around capital improvements where ROI and pay back criteria are favorable. Promotes, prepares, and participates in kaizen activities. Sustains results. Facilitates the execution of daily Gemba walk by assuring the proper utilization of hour-by-hour, SQDC boards and War Room tools. In conjunction with Human Resource Manager, coordinates appropriate “required to operate” and “required on roles” staffing levels. Directs the efforts of plant supervision to ensure the consistent application of human resource policies, procedures, and plant rules. Assures adherence to safety accountability guidelines. Coaches and mentors team members to assure their ongoing development Stays abreast of new trends and developments in methods, techniques, equipment, tools, materials, and supplies, which might be incorporated into the production process to increase efficiency or better use of resources. Researches and recommends capital equipment purchases. Participates in special projects and performs other duties as assigned. Qualifications: A hands-on leader that is a role model with high integrity, positive influence, and strong business acumen that embraces change, possesses a continuous improvement mindset, and has a passion for exceeding customer and company expectations. Degree in Engineering, Industrial Technology or Business or equivalent 10 years of staff level leadership experience. Minimum of 7 years' experience in Operations and/or Lean Management. Printing industry experience is preferred. Experience in being a change agent in complex transformational activities. Significant experience in implementation of Lean principals as they apply to manufacturing operations. Ability to apply structured problem-solving methodologies to determine root cause of problems and provide effective countermeasures. Excellent communication skills Advanced excel skills Diversity & Inclusion: MCC fosters an inclusive culture that respects and embraces our teammates' diverse backgrounds and experiences, so that everyone can achieve their full potential here. We aspire for our company to truly reflect the diversity of our customers and the markets we serve. We are committed to equal opportunity for everyone, regardless of peoples' gender identity/expression, age, language, sexual orientation, ability, race, socioeconomic status, national origin or other characteristics. #LI-ML1 #appcast For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($39,624.00 - $57,408.00) Target Bonus: % Req ID: 27507 Summary Are you interested in working with custom automotive builds? Do you have mechanical experience you want to put to the test? Are you looking for an exciting & rewarding career with a global industry leader? Vanair, a Lincoln Electric company, has been an industry leader for 52 years, working to bring our customers the very best in Mobile Power Solutions . Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxyfuel cutting equipment, and has a leading global position in brazing and soldering alloys. We are recognized as the Welding Expert™, which advance customers' fabrication capabilities to help them build a better world. What You Will Do As an experienced Truck Upfitter/ Equipment Installer, you will deliver outstanding products to customers who have trusted our brands for decades. If you like being challenged, want to be a part of the company's expansion, and are looking for personal development and growth, then we're looking for you! You will install various types of truck bodies, Mobile Power Systems , lighting packages, graphics, and other equipment to complete new custom builds for the work truck industry. You will work alongside some of the best in the business and will drive business growth. Education & Experience Required Vocational Training and 3+ years relative experience required; or GED with 3+ years in related field (does not require a university degree). Experience in automotive repair or vehicle upfitting is a plus. Must be able to read and interpret prints, electrical schematics and work orders Must be able to perform good mechanical and electrical assembly including troubleshooting any related issues. Must understand the use of all production equipment. Must be familiar with and understand all procedures and specifications relating to assembly, testing. This includes Process Control, Inspection and Testing, Inspection and Test Status, Must have the ability to lift up to 60 pounds; bend and lift containers. Must have the ability to operate cranes and fork trucks safely and responsibly. Must have the ability to properly adjust Volts/WFS, and weld with a MIG welder. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 26250 Employment Status: Salary Full-Time Req ID: 27769 Primary Function Supports sales and estimating activities in the Defense industry segment with a particular emphasis on the U.S. Navy, in particular replacing cast and forged components with additively manufactured components, by fostering key customer relationships, identifying new business opportunities and customers, creating proposals and quotes, negotiating and closing sales, and maintaining knowledge of current market conditions and technologies. Job Duties Interact with customers, sales, estimating and engineering team members to generate quotes, and maintain customer relationships. Assist in reviewing DOD contracts and technical publications/specifications. Use state-of-the-art CAD and additive manufacturing software in support of accurate quote estimates. Actively manage incoming leads and follow-up, maintain digital distribution list. Manage Additive Salesforce relationships, leads, and opportunities. Maintain database of new contacts, accounts and opportunities. Create dashboards and issue periodic reports. Assist in market research and outreach: identifying promising markets and engaging the customer base in those markets, develop sales tools content. Assist Marketing with trade show planning, setup and participation as required, as well as content for brochures, articles, social media, etc. Possess a strong understanding of our value proposition, product offering, our competition in the industry, and positioning. Follow the latest industry developments and stay up to date on competitors. Assumes additional duties as needed or directed in support of the Company's 2025/2030 Strategies. Requirements U.S. citizen. Bachelor's degree required, Engineering preferred. 3+ years proven track record in engineering sales or related market. Previous experience in welding, additive manufacturing or related fields preferred. Demonstrated communication skills - verbal and written. Computer literate with working knowledge of MS Office (i.e. Word, Excel, PowerPoint) and CAD (e.g. Solidworks, Autodesk, etc). Familiarity with CRM tools is a plus Technical skills required to understand and propose products or solutions by focusing on client requirements, including well-versed in welding metallurgy, mechanics of materials, and material/process technical specifications. Ability to communicate information, whether technical or non-technical to staff members and customers, in a clear and concise manner. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Monitor workplace conditions and employee performance enforcing safety policies and procedures. Perform plant and safety evaluations, analysis and audits. Administer OSHA Required Programs and training. Assist with Worker Compensation program. Conduct accident/injury investigations with supervisors. Test the Emergency Protection Systems as necessary and maintain documentation. Participate as a member of the Process Safety Management Program and Risk Management Plan teams. Perform and document Job Safety Analysis (JSA). Work with Supervisors to ensure all On the Job Training emphasizes Safety First. All other relevant duties to the job. Bachelor Degree in an environmental or health related science preferred. Knowledge of OSHA regulations and other general industry safety practices. 3+ years of safety experience within a similar work environment required. OSHA 10 and OSHA 30 certifications preferred. Excellent interpersonal communication skills. Proficient technology and computer skills, including MS Office based programs.