General Cleaner Macys - Strongsville
Bluechip Pros job in Strongsville, OH
PRIMARY PURPOSE To perform a variety of cleaning activities in assigned buildings/facilities, keeping in clean, sanitary and orderly condition and to perform other tasks related to the area of assignment. ESSENTIAL RESPONSIBILITIES: High Dusting Using a treated high duster, begin cleaning in a counter clockwise direction around the room - high dust surfaces above shoulder height, i.e., lights above doors, curtain tips, vents and ledges. Cleaning the High Duster: Gently brush in a downward direction into service cart.
Sanitizing / Spot Cleaning
Using a germicidal solution, work in a counter clockwise direction around room, sanitizing surfaces below shoulder height, i.e., ledges, chairs, telephone, countertops and trashcans.
Using proper solution, remove fingerprints and smudges from doorknobs and walls.
Using proper solution, spot clean windows.
Bathroom Cleaning
Using germicidal solution, wipe down in the following order:
Above and below sink.
Toilet seat and the outside of toilet bowl.
The inside of the toilet should be cleaned with a Johnnie Mop and proper germicidal solution. Be attentive to the rim of the toilet bowl to remove germs. Clean and check soap dispensers and paper dispensers daily. Refill as needed.
Empty Trash Cans
If liquid is inside the can, remove the liner and wipe trash can. Place a clean liner in the trash can.
Floor Dusting or Vacuuming
Using a treated dust mophead, begin at the back of the room using the "S" stroke to catch the dust on the leading edge. Dust under all furniture and in restroom, stopping just inside the door. Using the counter brush, gently clean the mophead with a downward stroke and sweep up the dust onto a dustpan and dispose of it into the service cart.
When vacuuming, start at the back of the room and work toward the door. Be sure to get under chairs and other furniture.
Grounds care
Outside areas: should be cleaned and checked several times during the day Completing the following.
* Empty and clean the ash urns and trash cans.
* Police sidewalks, flower beds and curb line for trash and cigarette butts. - - Spot clean spills on sidewalk. Remove gum with scraper. Wipe benches vending machines. Wipe lower window ledges. Hi dust for dust and cobwebs. Clean public area glass as necessary.
* Police parking lot for trash.
Public Common Areas:
Dust mop and spot mop the main hallways. Also making sure that :
* The glass is cleaned Several times during the day.
* The planters are cleaned and free from bird waste inside and out
* Make sure you check for cob webs/ do high dusting of the window areas at least two times per week. Checking all corners and edges for dirt, cob webs and other foreign debris.
Food Court:
* Clean, remove trash and sanitize tables. Place chairs back under tables. - Spot clean for spills.
* Empty and clean trash cans.
* Remove accumulated dirty trays to wash room and clean using tray power washer. Stack clean trays on shelf for recycled use.
* Police outside eating areas.
Floor Sanitizing
Using the proper germicidal solution, start at the back of the room when sanitizing the floor. Mop under furniture and behind doors as you back out of the room.
Your Inspection
After completing the room, mentally review your cleaning steps and visually check furniture placement. Make corrections as needed in order to prevent problems/complaints.
Hall - lobby - stairs - water fountains - furniture - wall spotting and high dusting is done daily.
Customer Relations and Service
Knock lightly on door before entering, if occupied.
Be friendly and cheerful to customers. Answer questions in a helpful, courteous manner or refer them to someone who can.
Report anything broken or out of order in the room to your supervisor.
Work quietly and speak quietly. Try to reduce or eliminate noise.
Stay in your assigned work area unless requested to go elsewhere by your supervisor.
Loud talking, laughing, etc. is never acceptable.
Always maintain a clean and neat personal appearance while on the job.
If you have not completed your work assignment by the end of your shift, be sure to report to your supervisor.
Always be courteous
Performs other duties as assigned or directed by supervisor and/or Account Manager (this could include, but is not limited to, floor care - stripping and waxing floors, extraction and bonneting of carpets, auto scrub and buffing of floors).
QUALIFICATIONS
Knowledge of:
Basic operations of janitorial work.
Basic methods, materials and equipment used in janitorial work.
Basic safe work practices.
The use of toxic and non-toxic chemicals (per MSDS sheets).
Ability to:
Understand and follow oral and written instructions.
Sufficiently communicate with co-workers and supervisors.
Operate powered and non-powered janitorial equipment.
Interpret written instructions and warning labels on cleaning chemicals.
Maintain physical condition appropriate to the performance of assigned duties and responsibilities which may include the following:
Walking, standing or sitting for extended periods of time
Operating powered and non-powered equipment
Lifting/carrying 1 - 30 lbs. equipment, supplies, trash
Push/pull, using both hands and arms while performing cleaning duties, exerting 5-35 lbs force
Climbing stairs and ladders while cleaning upper areas, drapes
Bending/twisting/balancing at waist, knees, neck throughout shift.
Kneeling/crouching/crawling while cleaning lower areas, retrieving supplies from lower shelves.
Reaching, handling, grasping and fingering while operating equipment, using hand and power tools, wiping and cleaning surfaces and using cleaning equipment. Overhead reaching required throughout shift.
Sight - in performing cleaning tasks and maintaining safety standards. Requires depth perception, hand and eye coordination in operation of equipment and tool use.
#IND123
General Cleaner Cincinnati No Weekends
Bluechip Pros job in Cincinnati, OH
PRIMARY PURPOSE To perform a variety of cleaning activities in assigned buildings/facilities, keeping in clean, sanitary and orderly condition and to perform other tasks related to the area of assignment. ESSENTIAL RESPONSIBILITIES: High Dusting Using a treated high duster, begin cleaning in a counter clockwise direction around the room - high dust surfaces above shoulder height, i.e., lights above doors, curtain tips, vents and ledges. Cleaning the High Duster: Gently brush in a downward direction into service cart.
Sanitizing / Spot Cleaning
Using a germicidal solution, work in a counter clockwise direction around room, sanitizing surfaces below shoulder height, i.e., ledges, chairs, telephone, countertops and trashcans.
Using proper solution, remove fingerprints and smudges from doorknobs and walls.
Using proper solution, spot clean windows.
Bathroom Cleaning
Using germicidal solution, wipe down in the following order:
Above and below sink.
Toilet seat and the outside of toilet bowl.
The inside of the toilet should be cleaned with a Johnnie Mop and proper germicidal solution. Be attentive to the rim of the toilet bowl to remove germs. Clean and check soap dispensers and paper dispensers daily. Refill as needed.
Empty Trash Cans
If liquid is inside the can, remove the liner and wipe trash can. Place a clean liner in the trash can.
Floor Dusting or Vacuuming
Using a treated dust mophead, begin at the back of the room using the "S" stroke to catch the dust on the leading edge. Dust under all furniture and in restroom, stopping just inside the door. Using the counter brush, gently clean the mophead with a downward stroke and sweep up the dust onto a dustpan and dispose of it into the service cart.
When vacuuming, start at the back of the room and work toward the door. Be sure to get under chairs and other furniture.
Grounds care
Outside areas: should be cleaned and checked several times during the day Completing the following.
* Empty and clean the ash urns and trash cans.
* Police sidewalks, flower beds and curb line for trash and cigarette butts. - - Spot clean spills on sidewalk. Remove gum with scraper. Wipe benches vending machines. Wipe lower window ledges. Hi dust for dust and cobwebs. Clean public area glass as necessary.
* Police parking lot for trash.
Public Common Areas:
Dust mop and spot mop the main hallways. Also making sure that :
* The glass is cleaned Several times during the day.
* The planters are cleaned and free from bird waste inside and out
* Make sure you check for cob webs/ do high dusting of the window areas at least two times per week. Checking all corners and edges for dirt, cob webs and other foreign debris.
Food Court:
* Clean, remove trash and sanitize tables. Place chairs back under tables. - Spot clean for spills.
* Empty and clean trash cans.
* Remove accumulated dirty trays to wash room and clean using tray power washer. Stack clean trays on shelf for recycled use.
* Police outside eating areas.
Floor Sanitizing
Using the proper germicidal solution, start at the back of the room when sanitizing the floor. Mop under furniture and behind doors as you back out of the room.
Your Inspection
After completing the room, mentally review your cleaning steps and visually check furniture placement. Make corrections as needed in order to prevent problems/complaints.
Hall - lobby - stairs - water fountains - furniture - wall spotting and high dusting is done daily.
Customer Relations and Service
Knock lightly on door before entering, if occupied.
Be friendly and cheerful to customers. Answer questions in a helpful, courteous manner or refer them to someone who can.
Report anything broken or out of order in the room to your supervisor.
Work quietly and speak quietly. Try to reduce or eliminate noise.
Stay in your assigned work area unless requested to go elsewhere by your supervisor.
Loud talking, laughing, etc. is never acceptable.
Always maintain a clean and neat personal appearance while on the job.
If you have not completed your work assignment by the end of your shift, be sure to report to your supervisor.
Always be courteous
Performs other duties as assigned or directed by supervisor and/or Account Manager (this could include, but is not limited to, floor care - stripping and waxing floors, extraction and bonneting of carpets, auto scrub and buffing of floors).
QUALIFICATIONS
Knowledge of:
Basic operations of janitorial work.
Basic methods, materials and equipment used in janitorial work.
Basic safe work practices.
The use of toxic and non-toxic chemicals (per MSDS sheets).
Ability to:
Understand and follow oral and written instructions.
Sufficiently communicate with co-workers and supervisors.
Operate powered and non-powered janitorial equipment.
Interpret written instructions and warning labels on cleaning chemicals.
Maintain physical condition appropriate to the performance of assigned duties and responsibilities which may include the following:
Walking, standing or sitting for extended periods of time
Operating powered and non-powered equipment
Lifting/carrying 1 - 30 lbs. equipment, supplies, trash
Push/pull, using both hands and arms while performing cleaning duties, exerting 5-35 lbs force
Climbing stairs and ladders while cleaning upper areas, drapes
Bending/twisting/balancing at waist, knees, neck throughout shift.
Kneeling/crouching/crawling while cleaning lower areas, retrieving supplies from lower shelves.
Reaching, handling, grasping and fingering while operating equipment, using hand and power tools, wiping and cleaning surfaces and using cleaning equipment. Overhead reaching required throughout shift.
Sight - in performing cleaning tasks and maintaining safety standards. Requires depth perception, hand and eye coordination in operation of equipment and tool use.
#IND123
Sales Account Manager
Hamilton, OH job
We are seeking a highly motivated and experienced Key Account Manager to join our team to contribute to the continued success of the company. The ideal candidate will be responsible for managing key accounts, developing relations, and growing business opportunities within existing accounts.
Position Responsibilities:
Develop and maintain strategic relationships with C-level executives, directors, and onsite/location managers to drive sales at multiple levels within key accounts
Visit key accounts on a quarterly basis to develop relations, understand customer needs, and identify opportunities for growth
Communicate customer needs, feedback and potential new business development projects to the internal team
Act as the customer advocate within the organization, ensuring that customer needs are met and exceeded
Work closely with the sales team to communicate customer needs without quoting responsibility
Develop and implement strategic account plans to achieve sales targets and goals
Collaborate with cross-functional teams to ensure customer satisfaction and retention
Monitor market trends, competitive activity, and industry develops to identify potential opportunities and threats
Qualifications and Skills:
Bachelor's degree required
Five plus years of experience in key account management, sales, or business development within the manufacturing industry
Strong communication and interpersonal skills
Proven track record of developing and maintaining relationships with key accounts
Ability to analyze data, identify trends, and develop strategic plans
Excellent negation and presentation skills
Ability to travel 50% of time
Client Service Associate - 1st
Columbus, OH job
Location: Columbus, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Client Service Associate for our client. This position is responsible for reviewing and updating client investment plans, processing transactions (cash flows, purchases, sales, and asset transfers), and preparing reports such as cash flow statements, investment performance summaries, and personal financial statements.What's a Typical Day Like?
Reviewing and updating client Investment Plans
Processing transactions (cash flows, purchases and sales, asset transfers)
Preparing for client meetings and responding to client requests
Creating client reports - cash flow, investment performance and activity, Personal Financial Statements, ad hoc
Preparing and/or reviewing documentation to open or update accounts and private investments
Supporting the team with all aspects of providing comprehensive financial advice and servicing clients
What Are the Requirements of the Job?
Bachelor's degree Accounting/Finance or related
The ability to analyze and interpret data to generate insightful questions and thoughtful recommendations
Comfortable working in a team environment
Strong Excel skill-set
Attention to detail
Related internship/job experience
Thrives in a fast-paced work environment
Ability to handle many tasks at once
Ability to work in fast-paced environment.
Ability to move or lift up to 50+ lbs.
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Capability to stand for prolonged periods of time
Communication skills.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Assembler - ALL Shift
Hamilton, OH job
Location: Fairfield, OH Employment Type: 1st ,2nd ,3rd Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring an Assembler for our client. This full-time, temp-to-hire job involves assembling parts and components by following instructions, measurements, and specifications. You'll position and fasten parts, verify accuracy, troubleshoot assembly issues, and complete production and quality forms.What's a Typical Day Like?
Study assembly instructions, specifications, and parts lists; gather parts, subassemblies, tools, and materials
Position parts and subassemblies by using templates or reading measurements
Assemble components by examining connections for correct fit; fasten parts and subassemblies
Verify specifications by measuring the completed component
Resolve assembly problems by altering dimensions to meet specifications; notify supervisor to obtain additional resources
Keep equipment operational by completing preventive maintenance requirements
Follow manufacturer's instructions, troubleshoot malfunctions, and call for repairs
Maintain a safe and clean working environment by complying with procedures, rules, and regulations
Maintain supplies inventory by checking stock to determine inventory level, anticipate needed supplies, place and expediate orders for supplies, and verify receipt of supplies
Conserve resources by using equipment and supplies as needed to accomplish job result
Document actions by completing production and quality forms
Contribute to the team effort by accomplishing related results as needed
Comply with all safety, hazardous material and OSHA training, rules, and reporting, ensuring a safe work environme
What Are the Requirements of the Job?
18 years old
High school diploma or G.E.D.
1 year of manufacturing experience
Work in a repetitive environment that includes 1 or more of the following for up to 12 hours: grasp, grip, reach, pull, push, bend, squat, kneel, twist, or balance
Ability to frequently lift cartons above (up to 8 feet overhead) or below shoulder level
Lift up to 50+ lbs.
Ability to utilize hand/eye coordination and manual dexterity including holding
Maintain flexibility regarding job assignments including mandatory overtime when necessary
Be a team player with the ability to work well with others
Good work history
Pass a background check and drug test
Wear steel-toe boots or shoes
Why Choose Kable Workforce Solutions?
Weekly Pay
Exclusive Access Opportunities to V.I.P. Vault
Day 1 Benefits
Various Bonus Opportunities
Eligibility for Employee of the Month Rewards
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Industrial Painter - 1st
Troy, OH job
Location: Troy, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Industrial Painter for our client. This position involves preparing and painting industrial equipment and parts, ensuring high-quality finishes and adherence to safety and process standards. The ideal candidate will have hands-on experience with airless spray systems, surface preparation, and reading blueprints to identify and protect unpainted surfaces.What's a Typical Day Like?
Prepare surfaces for painting by cleaning, sanding, and applying appropriate primers
Refer to prints to determine surfaces to leave bare. Cover bare surfaces and holes using tape, plugs, bolts etc.
Thin paint with chemical thinner to appropriate consistency
Position parts on racks, pallets and hangers
Apply paint using various methods including airless paint spraying
Operate and maintain painting equipment, tools and booth
Follow safety protocols and maintain a clean work environment
Work on a variety of projects including industrial equipment painting
Assemble and fabricate parts as needed for painting processes
Use precision measuring instruments to ensure accuracy in painting tasks
Monitor levels of filters and consumables in paint area and report for reordering
What Are the Requirements of the Job?
Previous experience in industrial painting
Proficiency in using hand tools and painting equipment
Familiarity with precision measuring instruments for accurate work
Experience with crane operation is a plus
Ability to recognize machined areas in drawings to cover prior to painting.
Ability to use a forklift to move and lift heavy parts for painting
Ability to work in fast-paced environment.
Ability to move or lift up to 50+ lbs.
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Capability to stand for prolonged periods of time
Communication skills.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Senior Auditor
Remote or Hamilton, OH job
Lead audit, review, and assurance engagements across a wide range of industries including privately held companies and nonprofits.
Plan, coordinate, and oversee different phases of client engagements.
Cultivate strong client relationships and serve as a trusted advisor.
Mentor and review the work of staff accountants.
Stay current on accounting standards, audit methodologies, and industry trends.
Drive firm growth and excellence as a stakeholder in an award-winning firm.
Qualifications
2-5 years of public accounting experience in audit.
Bachelor's degree in Accounting or related field.
CPA license preferred (or commitment to obtain).
Strong attention to detail and ability to manage multiple client engagements.
Advanced Excel skills and proficiency in Microsoft Office; QuickBooks Online experience a plus.
THRIVE Program: Our unique career development initiative provides personalized coaching and clear pathways for advancement.
Radical Transparency: Access to company-wide information empowers you to think and act like an owner.
Work- Life Integration: Enjoy flexible schedules, work-from-home options, 53-hour busy seasons, and Summer Fridays with reduced hours.
Location: Troy, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Driver for our client. This position involves safely transporting products and materials, performing vehicle inspections, and assisting with loading and unloading operations. The ideal candidate will have a strong commitment to safety, attention to detail, and experience operating forklifts and handling cargo.What's a Typical Day Like?
Inspects vehicles before and after use to determine vehicle condition, records inspections, and reports requirements.
Ensures safety in loading product or materials onto vehicles.
Deliver products or materials to destinations by identifying destinations, selecting routes, and driving vehicles.
Protects the load by maintaining a safe vehicle and condition and adhering to organizational policies and procedures and highway rules and regulations.
Conserve resources by using equipment and supplies as needed to accomplish ob results.
Maintain records by completing driver logs, obtaining shipper and consignee pprovals, and filing documents.
Contributes to teamwork by achieving relevant results as needed.
What Are the Requirements of the Job?
Valid Ohio license with clean driving record
Must pass a driver's physical test
Experience in loading and securing cargo
Experience operating forklifts
Experience with crane operation is a plus
No CDL required
Ability to work in fast-paced environment.
Ability to move or lift up to 50+ lbs.
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Capability to stand for prolonged periods of time
Communication skills.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Field Service Technician
Cincinnati, OH job
Location: Cincinnati, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Field Service Technician for our client. This job involves supervising the installation and startup of machines at customer sites, performing troubleshooting, fabrication, and maintenance work. You'll travel frequently to customer locations to ensure proper setup, perform repairs, train operators, and maintain equipment in optimal condition.What's a Typical Day Like?
Follow the agreed practices as defined in the quality management system.
Work within the scope of your responsibilities.
Check your work to verify its accuracy in meeting the objectives.
Know how you contribute to the achievement of the objectives.
Supervise installation and startup of machines at the customers' plant and maintain all working components as determined by customers' needs.
Travel to customers' location(s) to supervise installation of our machines at the customer's plant and perform startup of new machine.
Perform field trouble shooting on both warranty and repair orders.
Review jobs in the shop as production is in progress for possible field service problems.
Perform shop fabrication procedures including welding, layout and sheet metal fabrication on customers' machines at their sites.
Perform electrical fault/functions on customer's machinery.
Estimate materials that will be needed to trouble shoot customers machines.
Training of other employees and/or customers on machines.
Prepare service reports on jobs in the fields.
Assist Field Service Supervisor when required.
Assist work with manufacturing department on an as needed basis.
Other functions as directed.
Supervisory Responsibilities: May assist in training of temporary /new employees.
Travel: 65-75% travel.
What Are the Requirements of the Job?
Education and/or Experience: High School Diploma, and/or equivalent.
Minimum of 5-7 years of practical factory experience including welding.
Be able to add, subtract, multiply and divide basic numbers.
Be able to identify work process problems and possible solutions.
Stand for prolonged periods of time on concrete floor.
Will be required to kneel, squat, stoop, recline, climb, crawl, and/or bend on an as needed basis.
Must be able to adjust visual focus.
Must be able to lift up to 50 lbs. unassisted, over 50 lbs with assistance of a lifting device.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Utility - 1st Shift
Jackson Center, OH job
Location: Jackson Center, Ohio Employment Type: 1st Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring an Utility for our client. This position is responsible for packing bottles into containers, folding and inserting dividers, setting up trays, loading box makers, and palletizing finished products. You'll ensure proper stacking, banding, and wrapping of units while maintaining housekeeping and safety standards.What's a Typical Day Like?
Hand pack bottles into containers
Fold and insert dividers into constructed boxes
Fold and set-up corrugated trays
Load box maker
Remove units of finished product from conveyor system, stack properly, and band units
Palletize and stretch wraps bottles
Grind defective bottles in grinding area
Check for proper stacking
Maintain housekeeping standards including sweeping, cleaning, trash removal, and bailing
Adhere to all safety policies and procedures, BOS and SAP standards and activities, and GMP's
Communicate effectively with the Production, Quality, and Group Leaders.
Duties and responsibilities may vary and change due to product specifications.
What Are the Requirements of the Job?
Previous experience in a distribution center environment helpful.
Ability to work in fast-paced environment.
Ability to move or lift up to 50+ l*bs.
Capability to stand for prolonged periods of time
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Communication skills.
Pass background check and drug test.
Wear steel-toed shoes.
Why Choose Kable Workforce Solutions?
Weekly Pay
Exclusive Access Opportunities to V.I.P. Vault
Day 1 Benefits
Various Bonus Opportunities
Eligibility for Employee of the Month Rewards
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Commercial Litigation Attorney
Cincinnati, OH job
Location: Cincinnati, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Litigation Attorney for our client. This job is responsible for contributing to a structured mentorship-focused legal team, collaborating with experienced attorneys, managing an established book of business, and delivering high-level commercial litigation services while maintaining strong client relationships and professional involvement in the legal community.What's a Typical Day Like?
Structured mentorship programs to help you grow your practice and areas of expertise.
Collaborate and learn directly from seasoned attorneys who are passionate about mentorship and guiding the next generation of legal talent.
What Are the Requirements of the Job?
Admission to the Ohio State Bar or eligibility for admission through reciprocity. License to practice law in Commonwealth of Kentucky preferred.
A minimum of 5 years of commercial litigation experience and strong analytical, writing, and communication skills.
Established book of business valued at $200K or more.
Experience with business litigation, insurance defense, employment law, and/or creditors' rights helpful.
Strong client management and relationship-building skills.
Self-starter who takes initiative and works well independently but embraces teamwork.
Detail-oriented with the ability to manage multiple tasks and deadlines.
Willingness to get involved in the legal and civic community.
Ability to move or lift up to 50+ lbs.
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Capability to stand for prolonged periods of time
Communication skills.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Automation Technician - 1st
Miamisburg, OH job
Location: Miamisburg, OH Employment Type: 1st Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring an Automation Technician for our client. This job involves preparing and assembling mechanical and electrical components for industrial robotic systems, ensuring proper setup and operation of automation equipment. You'll maintain a clean and safe workstation, help with system installation and maintenance, monitor performance and troubleshoot issues, and support smooth manufacturing operations.What's a Typical Day Like?
Manufacturing floor doing mechanical and electrical assembly of industrial robotic work cells.
The biggest things we look for are a strong mechanical aptitude, familiarity with tools, blueprint reading skills, forklift or overhead crane experience.
Collaborate with engineering and production teams to optimize automation processes.
Provide training and support to production staff on the operation of automated systems.
Follow all safety protocols and company policies.
Troubleshoot and resolve technical issues with automated equipment.
Perform routine maintenance and repairs on robotic and automation systems.
Install, configure, and program automated systems and equipment.
What Are the Requirements of the Job?
Electrical experience is also good but not required.
Associate degree in Automation Technology, or a related field.
Strong technical skills in programming and configuring automated systems.
Knowledge of safety standards and regulations related to automation.
Ability to work independently and as part of a team.
Good communication and interpersonal skills.
Excellent problem-solving and analytical skills.
Ability to read and interpret technical drawings and schematics.
Ability to work in fast-paced environment.
Ability to move or lift up to 50+ lbs.
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Capability to stand for prolonged periods of time
Why Choose Kable Workforce Solutions?
Weekly Pay
Exclusive Access Opportunities to V.I.P. Vault
Day 1 Benefits
Various Bonus Opportunities
Eligibility for Employee of the Month Rewards
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Business Professional
Cincinnati, OH job
MBS is hiring a Business Professional in Cincinnati, OH. This position is a part-time opportunity. PRINCIPAL DUTIES & RESPONSIBILITIES
Train and mentor executives at the Senior Vice President level or higher, drawing from personal experience in Central functions.
Provide executive coaching to enhance leadership skills and professional development.
Collaborate with cross-functional teams, stakeholders, and vendors to ensure effective communication and coordination.
Utilize analytical skills to perform data analysis and contribute to strategic decision-making.
Demonstrate proactive problem-solving skills and meticulous attention to detail.
REQUIREMENTS
Proven experience as a Senior Vice President or higher within Central functions, preferably with a background in a similar industry.
Track record of successfully training and coaching executives.
Excellent communication and coordination skills.
Analytical mindset with the ability to perform data analysis.
Proactive problem-solving skills and attention to detail.
ABOUT THE KABLE GROUPFor over 50 years, The Kable Group has been committed to connecting candidates looking for reliable work opportunities with companies in need of workforce solutions. We leverage our expertise in core industries to ensure that the needs of our clients and our candidates alike are satisfied. Whether it's a professional position, skilled labor need, or an education opportunity, The Kable Group's suite of solutions caters to finding the right fit, every time.At the Kable Group, we do not just accept diversity - we celebrate it, we support it, and we thrive on it. Read our full diversity statement here.This job description is not intended to be all-inclusive and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Staff Accountant
Hamilton, OH job
Prepare journal entries, worksheets, reconciliation and other documentation to ensure that transactions are recorded in accordance with GAAP.
Ensures accuracy of all general ledger information.
Prepare monthly account reconciliations, journal entries, and proper documentation.
Review transactions and prepare / calculate accruals and deferrals.
Prepares monthly financial reports and adhoc financial requests from various accounting business partners; including but not limited to: Finance, Financial Reporting, Corporate Accounting, Property Management, Leasing, Lease Accounting.
Reviews Balance Sheet and Income Statements per property to verify account balances and reasonable revenue and expense amounts.
Follows all process documentation & procedures to ensure all accounting controls are met.
Assists with the preparation of special projects.
Improves or makes recommendations for process improvements related to above duties and responsibilities.
What we're looking for:
Bachelor's Degree in Accounting or related field required
1-3 years of accounting experience, which can be gained from a relevant internship position or previous employment.
Knowledge of standard and/or fund accounting principles, methods, and applications preferred.
Strong interpersonal skills.
Effective leadership abilities.
Excellent verbal and written communication skills.
Excellent organizational skills.
Meticulous attention to details and accuracy.
Flexible outlook toward task management.
Real estate industry experience preferred, but not required.
Proficient in Microsoft Office (Word, Power Point, especially Excel).
CNC Machinist -1st or 2nd
Lebanon, OH job
Location: Lebanon, OH Employment Type: 1st and 2nd Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a CNC Machinist for our client. This job involves setting up, programming, and operating CNC machines to produce parts to exact specifications. You'll work from blueprints, adjust tools and controls, monitor operations, and maintain equipment for optimal performance. You'll also inspect parts, fine-tune CNC programs, and follow safety and production standards while working independently or in a team.What's a Typical Day Like?
To machine component parts to pre-determined dimensions and tolerances while staying within assigned router hours, all while advancing company mission of being a forward-thinking, collaborative, and ethical business
Machines parts following blueprints and other written and verbal specifications
Sets up, adjusts, and efficiently operates CNC machine tools to perform diversified and difficult operations requiring close/exact tolerances on products with various dimensions and unusual contours and finish specifications
Selects, aligns, and inspects cutting tools for sharpness and usability
Calculates and sets controls and programming to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut
Starts and observe machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required
Basic programming skills
Cleans and maintains machine, tooling, and parts to ensure that equipment is in optimal production condition
Maintains and edits CNC programs to fine tune process for optimum performance
Recommends measures to improve production methods, equipment performance, and quality of products
What Are the Requirements of the Job?
Ability to operates various types of machine tools, to perform progressive machining
Ability to read blueprints and plants
Excellent mathematic and problem-solving skills
Excellent mechanical skills
Excellent organizational skills and attention to detail
Excellent time management skills
Demonstrates company values of personal accountability, discipline, trust, and proactive action
High school diploma or general education degree (GED required)
Vocational training course completion is preferred
Ability to set up, program, and operate CNC equipment, such as CNC VTL, CNC horizontal mill, CNC vertical mill, and CNC horizontal lathes
Ability to read and interpret blueprints, operate forklift and overhead crane, and read measuring instruments and maintain machinery and equipment in the machine trade
Ability to lift and carry up to 50 pounds occasionally; anything over 50 pounds requires two people, or the use of a lifting device
The ability to climb and work from ladders, operate lifting devices, and move around the shop floor without assistance is required
May also be required to work in confined spaces, crawling in, on, and under equipment
Ability to tolerate exposure to a typical shop environment, i.e. extreme heat, cold, dust, noise, fumes, and other elements
Must wear safety glasses, and steel toed shoes, along with additional PPE as required or needed.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Fabricator Welder E Band 2nd Shift
Cincinnati, OH job
Location: Cincinnati, OH Employment Type: 2nd Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Fabrication Welder for our client. This job involves reading blueprints and tape measures accurately, laying out and fabricating sheet metal and structural steel to spec, and performing MIG/TIG welding on mild and stainless steel. You'll grind welds for finish, lay out holes per print, and maintain welding equipment.What's a Typical Day Like?
Reads tape measure easily
Fabricates by welding sheet metal and structural steel to correct dimensions under proper supervision
Uses math functions accurately-multiplication, division, conversion of decimals to fractions
Fabricates welded sheet metal parts and structural steel frames to the correct dimensions per print from a collection of prints in a job work folder
Grinds all outside welds smooth in preparation for a finish paint part
Reads blueprints/mechanical engineering drawings
Lays out holes to proper dimensions per prints
Demonstrates knowledge of MIG welding applications
Maintains welder
Basic fit up and MIG welding of mild steel.
Advanced fit up, MIG and TIG skills with stainless steel.
Advanced blueprint and TIG and MIG welding skills
What Are the Requirements of the Job?
Possession of High School Diploma or GED
History of good attendance
Task oriented
TIG welding fabrication experience on structural steel and sheet metal
Previous experience working in a manufacturing environment
Good math skills with ability to convert decimals to fractions
Demonstrated ability to follow procedures
Accuracy in reading a tape measure
Ability to read, understand parts list and fill out quality check sheets
Ability to read and understand blueprints/mechanical engineering drawings
Frequently lifting up to 25 lbs., occasionally lifting up to 100 lbs. Lifting more than 50 lbs. overhead must be performed by using mechanical aids
Ability to work in fast-paced environment.
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Capability to stand for prolonged periods of time
Communication skills.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Custom Assembler 1st
Cincinnati, OH job
Location: Cincinnati, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Custom Assembler for our client. This job involves support production of control panels, assemblies, and related equipment. This role involves hands-on electrical and mechanical assembly, interpreting technical instructions, and ensuring products meet quality and delivery standards.What's a Typical Day Like?
Perform electrical / mechanical assembly on a variety of components, sub-assemblies, and top-level assemblies by following specified procedures and instructions to produce electrical / mechanical components.
Review and interpret general instructions on routine work and detailed instructions on new assignments; ask clarifying questions when in doubt.
Layout and wiring of industrial control panels (back panels and doors).
Interconnecting industrial control panels with skid mounted equipment.
Testing control systems.
Over-the-phone trouble shooting and customer service.
Meet project completion timelines and shipping schedules.
Maintain a clean and efficient shop & production area.
Has a full understanding of standard products and is able work with and assist assembly aspects of products.
Other duties as assigned
What Are the Requirements of the Job?
Possession of High School Diploma or GED
1-5 years' experience
Able to read advanced standard blueprints, schematics and have consistently proven high efficiencies on assignments with outstanding quality. Capable of doing welding required for the position.
Can perform functions of refrigeration including leak testing and repairs.
Have displayed the ability to be a good communicator and the ability to work in a team environment with success.
Preferred: previous experience working in a manufacturing environment
Preferred: experience and education in refrigeration, including wrapping, piping, soldering, brazing, and mounting of refrigeration components
Demonstrated ability to follow procedures
Familiarity with tools.
Ability to read and interpret blueprints, wiring diagrams, assembly prints, and electronic schematics.
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
Utility - 3rd Shift
Jackson Center, OH job
Location: Jackson Center, Ohio Employment Type: 3rd Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring an Utility for our client. This position is responsible for packing bottles into containers, folding and inserting dividers, setting up trays, loading box makers, and palletizing finished products. You'll ensure proper stacking, banding, and wrapping of units while maintaining housekeeping and safety standards.What's a Typical Day Like?
Hand pack bottles into containers
Fold and insert dividers into constructed boxes
Fold and set-up corrugated trays
Load box maker
Remove units of finished product from conveyor system, stack properly, and band units
Palletize and stretch wraps bottles
Grind defective bottles in grinding area
Check for proper stacking
Maintain housekeeping standards including sweeping, cleaning, trash removal, and bailing
Adhere to all safety policies and procedures, BOS and SAP standards and activities, and GMP's
Communicate effectively with the Production, Quality, and Group Leaders.
Duties and responsibilities may vary and change due to product specifications.
What Are the Requirements of the Job?
Previous experience in a distribution center environment helpful.
Ability to work in fast-paced environment.
Ability to move or lift up to 50+ l*bs.
Capability to stand for prolonged periods of time
Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel.
Ability to utilize hand/eye coordination.
Communication skills.
Pass background check and drug test.
Wear steel-toed shoes.
Why Choose Kable Workforce Solutions?
Weekly Pay
Exclusive Access Opportunities to V.I.P. Vault
Day 1 Benefits
Various Bonus Opportunities
Eligibility for Employee of the Month Rewards
How to Apply And Next Steps?
Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions
For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.
General Cleaner Macys AKRON
Bluechip Pros job in Akron, OH
PRIMARY PURPOSE To perform a variety of cleaning activities in assigned buildings/facilities, keeping in clean, sanitary and orderly condition and to perform other tasks related to the area of assignment. ESSENTIAL RESPONSIBILITIES: High Dusting Using a treated high duster, begin cleaning in a counter clockwise direction around the room - high dust surfaces above shoulder height, i.e., lights above doors, curtain tips, vents and ledges. Cleaning the High Duster: Gently brush in a downward direction into service cart.
Sanitizing / Spot Cleaning
Using a germicidal solution, work in a counter clockwise direction around room, sanitizing surfaces below shoulder height, i.e., ledges, chairs, telephone, countertops and trashcans.
Using proper solution, remove fingerprints and smudges from doorknobs and walls.
Using proper solution, spot clean windows.
Bathroom Cleaning
Using germicidal solution, wipe down in the following order:
Above and below sink.
Toilet seat and the outside of toilet bowl.
The inside of the toilet should be cleaned with a Johnnie Mop and proper germicidal solution. Be attentive to the rim of the toilet bowl to remove germs. Clean and check soap dispensers and paper dispensers daily. Refill as needed.
Empty Trash Cans
If liquid is inside the can, remove the liner and wipe trash can. Place a clean liner in the trash can.
Floor Dusting or Vacuuming
Using a treated dust mophead, begin at the back of the room using the "S" stroke to catch the dust on the leading edge. Dust under all furniture and in restroom, stopping just inside the door. Using the counter brush, gently clean the mophead with a downward stroke and sweep up the dust onto a dustpan and dispose of it into the service cart.
When vacuuming, start at the back of the room and work toward the door. Be sure to get under chairs and other furniture.
Grounds care
Outside areas: should be cleaned and checked several times during the day Completing the following.
* Empty and clean the ash urns and trash cans.
* Police sidewalks, flower beds and curb line for trash and cigarette butts. - - Spot clean spills on sidewalk. Remove gum with scraper. Wipe benches vending machines. Wipe lower window ledges. Hi dust for dust and cobwebs. Clean public area glass as necessary.
* Police parking lot for trash.
Public Common Areas:
Dust mop and spot mop the main hallways. Also making sure that :
* The glass is cleaned Several times during the day.
* The planters are cleaned and free from bird waste inside and out
* Make sure you check for cob webs/ do high dusting of the window areas at least two times per week. Checking all corners and edges for dirt, cob webs and other foreign debris.
Food Court:
* Clean, remove trash and sanitize tables. Place chairs back under tables. - Spot clean for spills.
* Empty and clean trash cans.
* Remove accumulated dirty trays to wash room and clean using tray power washer. Stack clean trays on shelf for recycled use.
* Police outside eating areas.
Floor Sanitizing
Using the proper germicidal solution, start at the back of the room when sanitizing the floor. Mop under furniture and behind doors as you back out of the room.
Your Inspection
After completing the room, mentally review your cleaning steps and visually check furniture placement. Make corrections as needed in order to prevent problems/complaints.
Hall - lobby - stairs - water fountains - furniture - wall spotting and high dusting is done daily.
Customer Relations and Service
Knock lightly on door before entering, if occupied.
Be friendly and cheerful to customers. Answer questions in a helpful, courteous manner or refer them to someone who can.
Report anything broken or out of order in the room to your supervisor.
Work quietly and speak quietly. Try to reduce or eliminate noise.
Stay in your assigned work area unless requested to go elsewhere by your supervisor.
Loud talking, laughing, etc. is never acceptable.
Always maintain a clean and neat personal appearance while on the job.
If you have not completed your work assignment by the end of your shift, be sure to report to your supervisor.
Always be courteous
Performs other duties as assigned or directed by supervisor and/or Account Manager (this could include, but is not limited to, floor care - stripping and waxing floors, extraction and bonneting of carpets, auto scrub and buffing of floors).
QUALIFICATIONS
Knowledge of:
Basic operations of janitorial work.
Basic methods, materials and equipment used in janitorial work.
Basic safe work practices.
The use of toxic and non-toxic chemicals (per MSDS sheets).
Ability to:
Understand and follow oral and written instructions.
Sufficiently communicate with co-workers and supervisors.
Operate powered and non-powered janitorial equipment.
Interpret written instructions and warning labels on cleaning chemicals.
Maintain physical condition appropriate to the performance of assigned duties and responsibilities which may include the following:
Walking, standing or sitting for extended periods of time
Operating powered and non-powered equipment
Lifting/carrying 1 - 30 lbs. equipment, supplies, trash
Push/pull, using both hands and arms while performing cleaning duties, exerting 5-35 lbs force
Climbing stairs and ladders while cleaning upper areas, drapes
Bending/twisting/balancing at waist, knees, neck throughout shift.
Kneeling/crouching/crawling while cleaning lower areas, retrieving supplies from lower shelves.
Reaching, handling, grasping and fingering while operating equipment, using hand and power tools, wiping and cleaning surfaces and using cleaning equipment. Overhead reaching required throughout shift.
Sight - in performing cleaning tasks and maintaining safety standards. Requires depth perception, hand and eye coordination in operation of equipment and tool use.
#IND123
General Cleaner Macys CANTON
Bluechip Pros job in Canton, OH
PRIMARY PURPOSE To perform a variety of cleaning activities in assigned buildings/facilities, keeping in clean, sanitary and orderly condition and to perform other tasks related to the area of assignment. ESSENTIAL RESPONSIBILITIES: High Dusting Using a treated high duster, begin cleaning in a counter clockwise direction around the room - high dust surfaces above shoulder height, i.e., lights above doors, curtain tips, vents and ledges. Cleaning the High Duster: Gently brush in a downward direction into service cart.
Sanitizing / Spot Cleaning
Using a germicidal solution, work in a counter clockwise direction around room, sanitizing surfaces below shoulder height, i.e., ledges, chairs, telephone, countertops and trashcans.
Using proper solution, remove fingerprints and smudges from doorknobs and walls.
Using proper solution, spot clean windows.
Bathroom Cleaning
Using germicidal solution, wipe down in the following order:
Above and below sink.
Toilet seat and the outside of toilet bowl.
The inside of the toilet should be cleaned with a Johnnie Mop and proper germicidal solution. Be attentive to the rim of the toilet bowl to remove germs. Clean and check soap dispensers and paper dispensers daily. Refill as needed.
Empty Trash Cans
If liquid is inside the can, remove the liner and wipe trash can. Place a clean liner in the trash can.
Floor Dusting or Vacuuming
Using a treated dust mophead, begin at the back of the room using the "S" stroke to catch the dust on the leading edge. Dust under all furniture and in restroom, stopping just inside the door. Using the counter brush, gently clean the mophead with a downward stroke and sweep up the dust onto a dustpan and dispose of it into the service cart.
When vacuuming, start at the back of the room and work toward the door. Be sure to get under chairs and other furniture.
Grounds care
Outside areas: should be cleaned and checked several times during the day Completing the following.
* Empty and clean the ash urns and trash cans.
* Police sidewalks, flower beds and curb line for trash and cigarette butts. - - Spot clean spills on sidewalk. Remove gum with scraper. Wipe benches vending machines. Wipe lower window ledges. Hi dust for dust and cobwebs. Clean public area glass as necessary.
* Police parking lot for trash.
Public Common Areas:
Dust mop and spot mop the main hallways. Also making sure that :
* The glass is cleaned Several times during the day.
* The planters are cleaned and free from bird waste inside and out
* Make sure you check for cob webs/ do high dusting of the window areas at least two times per week. Checking all corners and edges for dirt, cob webs and other foreign debris.
Food Court:
* Clean, remove trash and sanitize tables. Place chairs back under tables. - Spot clean for spills.
* Empty and clean trash cans.
* Remove accumulated dirty trays to wash room and clean using tray power washer. Stack clean trays on shelf for recycled use.
* Police outside eating areas.
Floor Sanitizing
Using the proper germicidal solution, start at the back of the room when sanitizing the floor. Mop under furniture and behind doors as you back out of the room.
Your Inspection
After completing the room, mentally review your cleaning steps and visually check furniture placement. Make corrections as needed in order to prevent problems/complaints.
Hall - lobby - stairs - water fountains - furniture - wall spotting and high dusting is done daily.
Customer Relations and Service
Knock lightly on door before entering, if occupied.
Be friendly and cheerful to customers. Answer questions in a helpful, courteous manner or refer them to someone who can.
Report anything broken or out of order in the room to your supervisor.
Work quietly and speak quietly. Try to reduce or eliminate noise.
Stay in your assigned work area unless requested to go elsewhere by your supervisor.
Loud talking, laughing, etc. is never acceptable.
Always maintain a clean and neat personal appearance while on the job.
If you have not completed your work assignment by the end of your shift, be sure to report to your supervisor.
Always be courteous
Performs other duties as assigned or directed by supervisor and/or Account Manager (this could include, but is not limited to, floor care - stripping and waxing floors, extraction and bonneting of carpets, auto scrub and buffing of floors).
QUALIFICATIONS
Knowledge of:
Basic operations of janitorial work.
Basic methods, materials and equipment used in janitorial work.
Basic safe work practices.
The use of toxic and non-toxic chemicals (per MSDS sheets).
Ability to:
Understand and follow oral and written instructions.
Sufficiently communicate with co-workers and supervisors.
Operate powered and non-powered janitorial equipment.
Interpret written instructions and warning labels on cleaning chemicals.
Maintain physical condition appropriate to the performance of assigned duties and responsibilities which may include the following:
Walking, standing or sitting for extended periods of time
Operating powered and non-powered equipment
Lifting/carrying 1 - 30 lbs. equipment, supplies, trash
Push/pull, using both hands and arms while performing cleaning duties, exerting 5-35 lbs force
Climbing stairs and ladders while cleaning upper areas, drapes
Bending/twisting/balancing at waist, knees, neck throughout shift.
Kneeling/crouching/crawling while cleaning lower areas, retrieving supplies from lower shelves.
Reaching, handling, grasping and fingering while operating equipment, using hand and power tools, wiping and cleaning surfaces and using cleaning equipment. Overhead reaching required throughout shift.
Sight - in performing cleaning tasks and maintaining safety standards. Requires depth perception, hand and eye coordination in operation of equipment and tool use.
#IND123