Board operator jobs near me - 28 jobs

Strong process improvement & safety mentality Ability to multitask and handle multiple simultaneous assignments Self-motivated Demonstrated problem solving and organizational skills Demonstrated troubleshooting/Root Cause Analysis skills Ability to work a 12-hour rotating shift (including evenings, weekends and holidays) and/or respond to callouts as necessary The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions Intermediate computer skills such as: opening, creating and updating content in MS Word documents and Excel spreadsheets and using CMMS system for plant PM's is required Minimum 3 years' experience operating Siemens DCS Control System or compatible control system Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., work in adverse weather conditions A minimum of a high school diploma and 6 years operations experience as a process field operator or 3 years' experience in similar role The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required Safely monitor, maintain, and operate all process equipment to efficiently meet the requirements stated in the Daily Operating Instructions, Key Operating Parameters, and Standard Operating Procedures Maintain unit Safety and housekeeping standards Evaluate process variables, sample results, and equipment diagnostic information to identify and initiate changes and/or corrections to maintain safety, efficiency and optimum control of the unit and equipment Monitor unit operation and take appropriate action to ensure compliance with all applicable policies, procedures, laws, regulations, and Company standards as they pertain to Environmental, Health and Safety Start-up/Shutdown of plant equipment Adjust controls to operate equipment in the recommended or prescribed operating ranges De-pressure equipment, lines and vessels as need for maintenance and daily operations Read, monitor and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. Ensure regulatory compliance and record keeping requirements are met and continually monitored Visually inspect equipment and controls at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication Follow procedures at all times according to all Standard Operating Procedures and plant procedures Implement and carryout LO/TO procedures to accommodate operations daily needs Adhere to all OSHA and plant mandated HSE (Health, Safety, and Environmental) policies Safety Awareness: Ability to recognize and identify potential hazards. Evaluates changes in work environment with respect to impact on safety of self and others. Understands potential threats created by deviation from safety procedures and improper use of tools and equipment. Uses personal protection equipment. Uses tools and equipment in compliance with manuals and training. Calls attention to potential and actual hazardous conditions as they arise. Demonstrates knowledge of lockout/tag out procedures. Stops work if there are unsafe working conditions.

Duration: 10 Weeks Breakthroughs that would help to greatly improve wireless communications are critically important for the success of 6G. We are devoted to establishing fundamentals and proposing game-changing, high-impact technology solutions and disruptive radio connectivity concepts. We are seeking highly self-motivated talents with strong machine learning, signal processing, and wireless communication backgrounds to work on various challenges in communication systems, including but not limited to new algorithms and concepts for the physical layer, compression, (de)coding, (de)modulation, wireless channel modelling, feedback, radio resource management, and radio sensing. EDUCATIONAL RECOMMENDATIONS Ideal candidate will be pursuing a PhD degree in electrical/electronic engineering, computer science, applied mathematics, or related fields, with experience in wireless communication, signal processing, and machine learning. Minimum GPA 3.0. Excellent background in wireless communication and signal processing Strong troubleshooting skills Work independently as well as inside a collaborating team Good programming skills Good track record in scientific publication As part of a team, you will Identify the state-of-the-art of the proposed project Apply relevant analysis and propose potential solutions Compare against legacy benchmarks, and provide performance evaluation and recommendations Document all the technical details, make internal presentations Write an internal technical report for potential conference/journal publications. It is desirable that the internship work to be of sufficient quality to warrant publication.

Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. *************** Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. Wood is currently recruiting for a Process Board Operator for a position in Hebron, OH. The Process Board Operator will be responsible for safely monitoring, maintaining, and operating process equipment and optimizing product recoveries in an active Waste Plastics Pyrolysis Facility. Authorization to work permanently in the U.S. without sponsorship required.

We're looking for a Service technician to service their existing customers. Looking for an experienced 5+ year installer that wants to get into service or someone that is already doing service work. The major brands of equipment they will need is Crestron and AMX systems. They must have their own basic hand tools, know how to use a multimeter and trace connection issues. Must be professional and have the ability to interface with enterprise customers. Customer job description below. Ability to troubleshoot and resolve complex technical issues related the following types of equipment and/or systems: y- Custom Control systems: Crestron DM and NVX / AMX - Complex audio video systems found in executive board rooms and conference centers - Video teleconferencing equipment and systems - Audio Visual over IP (AVoIP) networks for the use of audio-visual data over LAN, WAN and internet. - Audio DSP based systems to include amplifiers, speakers and microphones - Projection display devices and systems - Video wall equipment and systems. - Digital signage equipment and systems - To a lesser degree: RF Systems (analog and digital) Other Responsibilities - Ability to conduct Preventative Maintenance testing - Site surveys related to service agreement quotes - Ability to write concise service reports and or system site surveys - Excellent verbal and written skills - Ability to successfully manage multiple service projects - Ability to lead and mentor junior/intermediate level field service techs Education - A two-year diploma from a college of technical school, or equivalent experience - CTS certification highly preferred, or equivalent experience Experience: 3 years minimum field service experience Other: - Must maintain a valid driver's license with clean driving record - Must be able to stand, kneel and/or crouch for long periods of time - Must be able to climb ladders and scaffolding - Must be able to lift in excess of 50 pounds - Must be able to work in high places, as well as small, cramped places - Must be able to work in hot humid places, as well as cold places Skills Audiovisual, Cat6, Audio, Service, Video conferencing, Installation, Qsys, Crestron, BiAmp, AMX Top Skills Details Audiovisual,Cat6,Audio,Service,Video conferencing,Installation Experience Level Expert Level Job Type & Location This is a Contract position based out of San Francisco, CA. Pay and Benefits The pay range for this position is $45.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Jan 22, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

TEAM is seeking an entry level Remote Visual Inspection Technician to join our Remote Visual Inspection team. This position entails the skilled use of robotic camera systems at power generation, process chemical and refining facilities. Once properly trained, the RVI Technician will travel to clients' sites and utilize a wide array of video borescopes and robotic camera systems to inspect critical assets. The Technician will be responsible for the completion of inspection services using RVI proprietary technology, including the report writing at the conclusion of each job. Services to be carried out with unyielding integrity in addition to keeping safety a top priority at all times. Position located in our Hackettstown, New Jersey facility. DUTIES AND RESPONSIBILITIES: * Successfully communicate service offering and value proposition, perform job walk-downs, complete pre-job questionnaires, effectively articulate critical to quality/safety challenges. * Make travel arrangements to job site, package equipment and communicate with other crew member's specifics of inspection criteria and job duties. * Select, accessorize, setup, test and operate a wide array of RVI equipment specific to site and inspection requirements. * Develop inspection reports at the conclusion of each shift/inspection/job as required by client and RVI Team Leader. * Be knowledgeable of RVI practices, equipment, industry, competition, complimentary services. * Clean and maintain equipment, vehicle and facility. * Make safety a top priority at all times. * Performance of other duties as assigned. KNOWLEDGE AND REQUIREMENTS: * Post-secondary education in technical construction, or survey, disciplines recommended. In-house technical training from equivalent industry or companies may also be considered. * Must possess strong mechanical aptitude and mathematical skills. * Requires excellent communication skills, both written and oral. * Must be able to qualify for TWIC (Transportation Worker Identification Credential) card - candidate must be a U.S. citizen or fall into an eligible immigration category as defined by the Transportation Security Administration and be able to comply with the TWIC background check requirements. * Must be able to gain and maintain unescorted access to nuclear power facilities. * Requires excellent ability to represent the company in a professional manner with regard to communicating and interfacing with clients and capable of maintaining confidentiality. * Must have the ability to travel upwards of 80% of the time during peak periods. * Must be customer focused, have an excellent attention to detail and a strong ability to work in a team environment. * In order to comply with customer requirements for the use of respirators while on site performing inspections, the technician must be willing to remove facial hair. * Must possess intermediate working knowledge of Microsoft Word, Excel and Outlook.

We are the movers of the world and the makers of the future. We get up every day, roll up our sleeves and build a better world -- together. At Ford, we're all a part of something bigger than ourselves. Are you ready to change the way the world moves? Enterprise Technology plays a critical part in shaping the future of mobility. If you're looking for the chance to leverage advanced technology to redefine the transportation landscape, enhance the customer experience and improve people's lives, this is the opportunity for you. Join us and challenge your IT expertise and analytical skills to help create vehicles that are as smart as you are. Seeking a **Technical Anchor** to: + Design, develop, and maintain secure and scalable cloud infrastructure platforms using the latest DevSecOps and Platform Engineering methodologies + Create and implement best practices and processes for code quality, security, performance, and scalability using Sonarqube, Cycode, DAST, SAST & FOSSA + Possess strong experience using GCP specific services like Compute Engine, CloudRun, GKE, Cloud operations suite, Service Mesh, Anthos, Pub/Sub, Dataflow, Cloud Scheduler, Bigtable, AlloyDB and other managed services. + Possess experience with Google Cloud infrastructure provisioning including VPC, Subnet, Gateway, Security groups, managed services, Kubernetes Cluster etc. + Possess expertise with automating Infrastructure as Code using Terraform, Packer, Ansible, Shell Scripting and ArgoCD + Lead cross-functional teams to drive the adoption of DevSecOps and Platform Engineering best practices across the organization + Possess experience in implementing Auto scaling, Disaster Recovery, High Availability, Multi-region Active/Active & Active/Passive configurations & best practices is added advantage. + Evaluate and select appropriate technologies and tools to support the development and deployment of products on the eCommerce foundation layer + Collaborate with stakeholders to understand business needs and requirements, and translate them into technical and non-functional specifications + Work with Product teams to understand their pain points and increase the Developer Experience through Platform Engineering Capabilities + Possess experience with Internal Developer Platform (IDP) like Backstage and address developer productivity + Strategize & work with leaders across Ford's Enterprise Architecture, IT Operations to make significant, measurable impact on the eCommerce Platform + Possess expertise with patch management, APM tools like Dynatrace/AppDynamics, Prometheus, Grafana, ELK for monitoring and alerting. + Possess experience in Elastic Search service offerings in K8s. + Possess experience in Cloud FinOps to optimize Cloud Infrastructure Consumption Cost **What you'll do...** + Responsible for overall Infrastructure Architecture and evolution of next gen platforms. Ideal candidates will research the existing products and recommend solutions to run workloads in futuristic Infrastructure Architecture landscape + Conduct and perform Infrastructure as Code reviews, automate and deploy Cloud Infrastructure + Experience with implementing AIOps in the Platform Engineering space and increase Developer Experience + Identify code vulnerabilities and performance bottlenecks at the Infrastructure Layer, and recommend solutions to improve the overall quality and performance of the sub systems + Create and maintain technical documentation, including architecture diagrams, design documents, and operational procedures for High Availability, Disaster Recovery scenarios + Analyze kernel logs, network stats, APM metrics, application logs to troubleshoot CPU/Memory/Resource hot spots, API latency and application/platform health + Analyze and identify root-cause and fix complex performance problems involving multiple teams, networks, and software in GCP that relate to scaling and performance + Build Automation for repeatable DevSecOps tasks and help with improving Software Engineers' productivity + Mentoring Team members to scale and perform at their next level + Thought Leadership around Shift Left (Quality, Security, OSS use) & Shift Right (Platform Engineering) and increasing adoption in the eCommerce Platform **You'll have...** + Bachelor's degree in Computer Science, Engineering, Information Technology or related + 5+ years of experience in the Software Development and Platform Engineering domain + Experience with the following: Microservices architectures, Micro Front-end Cloud-Native architectures, Event-driven architectures, APIs, Domain-Driven Design, Public Cloud (Google Cloud), Serverless, Elastic Search, Kubernetes, Docker, DevSecOps, building scalable, reliable, available solutions, and/or performance testing. + Strong technical background with the capability of being hands-on and earn the respect and ability to mentor top individual technical talent. + Experience in Cloud Native systems, Transactional Systems, Multi-Tenancy, five-nines availability and Containerization technologies. + Experience in collaborating and partnering with other technical domain experts such as cloud, security, SRE and Release Mgmt. processes + Proven facilitation skills - able to effectively drive discussion among diverse perspectives and reach a decision or recommendation + Proven ability to work closely with architect and leadership teams. + Effectively work with cross-functional teams across the organization - inside and outside of the technology and software organization + Excellent communication and interpersonal skills + Ability to work effectively in a remote/virtual work setting with other global team members **Even better, you may have...** + Master's degree in Computer Science, Engineering Information Technology or related + GCP Cloud Architect and/or CKA Certifications You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder...or all of the above? No matter what you choose, we offer a work life that works for you, including: - Immediate medical, dental, vision and prescription drug coverage - Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more - Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more - Vehicle discount program for employees and family members and management leases - Tuition assistance - Established and active employee resource groups - Paid time off for individual and team community service - A generous schedule of paid holidays, including the week between Christmas and New Year's Day - Paid time off and the option to purchase additional vacation time. For a detailed look at our benefits, click here: ******************************* This position is a range of salary grade 8. SOUTHEAST MI RESIDENTS: This role is posted as remote unless you reside within 50 miles of Dearborn, MI-in which case we request on-site presence up to 4 days a week. Visa sponsorship is available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. \#LI-Remote **Requisition ID** : 51212

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Light Medium Tech II - DOT (Flag) Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Job Description *** If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS3 to ************ *** Cox Fleet keeps your fleet moving. Headquartered in Indianapolis, Cox Fleet has grown to become one of the largest fleet maintenance companies in the country. Cox Fleet is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Cox Fleet also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. JOB SUMMARY Cox Fleet is currently hiring a Light/Medium Duty Automotive Technician to join our recently acquired company, Corcoran Fleet Services, to support our combined future growth. If you're looking for a new place to call home, we would love to talk with you. The Light/Medium Duty Automotive Technician will be responsible for performing Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, licensed DOT inspections, and other duties as assigned at our customer locations. Light/Medium Duty Automotive Technician continues to learn additional advanced mechanical skills and diagnostic Techniques. A successful Light/Medium Duty Automotive Technician complies with all company policies and achieves high level performance metrics. You will work on various light/medium duty vehicles such as F150, F250, and F350, including some specialty equipment etc. Travel is required 100% of the time. This position will service multiple customers in your area and around the state, depending on customer concentration. A rotating schedule of Mon-Fri the first week and Mon-Sat the second week (Home every day) This is a Flat Rate Position with abundance of work available. DUTIES Always follow and comply with safe operating practices and procedures. Travel to and perform work at customer location, with most of the work performed outside. Perform scheduled preventative maintenance (“PM”), DOT Inspections and follow up repairs on light and medium vehicles in the field. Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment. Use hand tools, precision instruments, as well as some Diesel tools, lifts, and jacks. Perform minor adjustment and repairs on various types of customer vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Engines (gas only), Transmissions (manual and automatic) etc. Diagnose, adjust, and repair various types of vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas only), Transmissions (manual and automatic), Clutches, Differentials, etc. Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as scanners and pressure gauges. Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives. Independently determining parts required for each job, ordering, and picking up the parts for installation. Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT. Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders (“RO”) using company provided cellphone and on paper. Accurately complete DOT forms and all other forms of documentation in a timely fashion, as applicable. Maintain a clean and safe work environment. Assist in cleanup at the end of each day for tools, parts, and equipment. Apply knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job. Work with support team to assess customer needs, provide information or assistance, resolving their problems, or satisfying their expectations. Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations. Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards. Maintain a high level of productivity and be able to work within or close to most Standard Repair Times. Communicate with support team in corporate offices to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes. Participate and complete all-in company required safety training. Maintain assigned service vehicle, conduct safety checks and daily pre/post trip inspections. Adhere to company policies, processes, and procedures. REQUIREMENTS High School Diploma or GED preferred. Safe drivers needed; valid driver's license required. Possess and supply a set of hand tools necessary to perform required job duties. Minimum of one (1) year of experience as an Automotive Technician on light/medium vehicle repair or equivalent combination of technical education/certifications/skill/experiences. 2 years of equivalent experience in a similar capacity Technician role. Participate in and complete all-in company required training. SKILLS & ABILITIES Understand the implications of new information for both current and future problem-solving and decision-making. Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. Ability to determine the type of tools and equipment needed. Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. WHY Cox Fleet? Flat Rate. $25.00 to $30.00+ per hour based on experience and location. (Paid weekly) Technical training provided to advance your career. Dedicated career path - ‘Over 50% of our front-line managers are promoted from within'. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

We are: Accenture Song accelerates growth and value for our clients through sustained customer relevance. Our capabilities span ideation to execution: growth, product and experience design; technology and experience platforms; creative, media and marketing strategy; and campaign, content and channel orchestration. With strong client relationships and deep industry expertise, we help our clients operate at the speed of life through the unlimited potential of imagination, technology and intelligence. Visit us at: ********************** Our Digital Commerce services create new, innovative customer journeys through bleeding-edge, end-to-end solutions that unify the digital and physical. Leveraging deep industry knowledge and expertise, we build connected and personalized customer experiences that catalyze customer buying decisions-at speed and at scale. We strategize, design, develop and implement omni-channel B2C and B2B commerce capabilities, platforms and systems. By improving digital channel maturity and delivering integrated experiences, we boost customer interaction and engagement, delivering tangible results and a better bottom line. You are: You have proven work experience in the CPQ space. You are a problem solver with extensive consulting and industry experience. You have a mind for both technology and business, and you know the ins and outs of sales team functions and operations. You are a clear and effective communicator, and you have an open, relatable manner with clients and colleagues. You perform well in an agile, fast-paced working environment. You know how to balance being a leader with contributing to the collective efforts of the team. The work: While there will never be a typical day at Accenture Song, we've highlighted a few of your exciting responsibilities: + Help clients transform and optimize their CRM, sales, quoting experience, and pricing strategies + Lead delivery teams that help clients build and manage customer relationships and maximize sales + Advise clients on ways to measure and improve their customer satisfaction and other business metrics + Establish long-term client relationships and identify opportunities to help build the Accenture Consulting practice + Manage and coach junior team members, and continue to grow your own expertise to help Accenture maintain its thought-leadership position + Help delivery large-scale CPQ solution implementations, providing hands-on contributions to the software design, development, and implementation. + Resolve integration and interfacing issues between various back-end systems. + Optimize application performance and scalability. Here's what you'll need: + 4+ years of experience architecting CPQ solutions including capabilities such as: + Product modeling, configuration, and rules (CTO and ETO) + Guided configuration and selling + Pricing and discounting + Workflow and approvals + Quoting, document generation, and e-signature + Contracts, subscriptions, and renewals + Quote to order conversion + 2 years of experience using CPQ platform technologies such as Conga, SAP CPQ (formerly Callidus), Oracle CPQ Cloud (formerly Big Machines), PROS, and Salesforce Revenue Cloud (formerly Steelbrick) + A minimum of 2 years of hands on experience with development in order to support the dev team & validate code and/or scripts. + 1+ years of experience in the CPQ space within the Comms, Media, or Tech industries. Bonus points if: + Bachelor's degree in engineering, computer science, information systems, or business + You have certifications in any of the following: + Oracle CPQ Cloud Certified Implementation Specialist + Salesforce CPQ Specialist + Salesforce Admin + Salesforce Developer + Conga CPQ Product Certification + Experience with cloud application architectures, data models, configuration, and customization + Experience with application integration methods including: Web service standards (WSDL, REST, SOAP, XML), Middleware/ETL, and bulk extract/load + Experience with several of the following languages or standards: SQL, SOQL, SOSL, Java, JavaScript, JQuery, JSON, HTML/XHTML, CSS, XML/XSL, BML, Apex, Visualforce + Experience in application architecture / enterprise architecture, systems integration and development, and package implementation with knowledge of interactive design + Expertise in working with other relevant CPQ packaged solutions + Firm understanding of web application design and analysis, design patterns, and object-oriented design + Strong leadership skills, including the ability to facilitate team and client meetings effectively and to deliver constructive feedback + Experience with web application design and analysis, design patterns, and object-oriented design Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below.We accept applications on an on-going basis and there is no fixed deadline to apply. Information on benefits is here. (************************************************************ Role Location Annual Salary Range California $63,800 to $205,800 Cleveland $59,100 to $164,600 Colorado $63,800 to $177,800 District of Columbia $68,000 to $189,300 Illinois $59,100 to $177,800 Maryland $63,800 to $177,800 Massachusetts $63,800 to $189,300 Minnesota $63,800 to $177,800 New York/New Jersey $59,100 to $205,800 Washington $68,000 to $189,300 #LI-NA-FY25 Requesting an Accommodation Accenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with Accenture and have accommodation needs such as for a disability or religious observance, please call us toll free at **************** or send us an email or speak with your recruiter. Equal Employment Opportunity Statement We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity Statement (******************************************************************************************************************************************** Accenture is an EEO and Affirmative Action Employer of Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women. Other Employment Statements Applicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States. Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration. Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process. Further, at Accenture a criminal conviction history is not an absolute bar to employment. The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information. California requires additional notifications for applicants and employees. If you are a California resident, live in or plan to work from Los Angeles County upon being hired for this position, please click here for additional important information. Please read Accenture's Recruiting and Hiring Statement for more information on how we process your data during the Recruiting and Hiring process.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Light Medium Tech II - DOT (Flag) Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Job Description *** If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS3 to ************ *** Cox Fleet keeps your fleet moving. Headquartered in Indianapolis, Cox Fleet has grown to become one of the largest fleet maintenance companies in the country. Cox Fleet is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. Cox Fleet also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. JOB SUMMARY Cox Fleet is currently hiring a Light/Medium Duty Automotive Technician to join our recently acquired company, Corcoran Fleet Services, to support our combined future growth. If you're looking for a new place to call home, we would love to talk with you. The Light/Medium Duty Automotive Technician will be responsible for performing Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, licensed DOT inspections, and other duties as assigned at our customer locations. Light/Medium Duty Automotive Technician continues to learn additional advanced mechanical skills and diagnostic Techniques. A successful Light/Medium Duty Automotive Technician complies with all company policies and achieves high level performance metrics. You will work on various light/medium duty vehicles such as F150, F250, and F350, including some specialty equipment etc. Travel is 100% of the time. This position will service multiple customers in your area and around the state, depending on customer concentration. A rotating schedule of Mon-Fri the first week and Mon-Sat the second week (Home every day) This is a Flat Rate Position with abundance of work available. DUTIES Always follow and comply with safe operating practices and procedures. Travel to and perform work at customer location, with most of the work performed outside. Perform scheduled preventative maintenance (“PM”), DOT Inspections and follow up repairs on light and medium vehicles in the field. Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment. Use hand tools, precision instruments, as well as some Diesel tools, lifts, and jacks. Perform minor adjustment and repairs on various types of customer vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Engines (gas only), Transmissions (manual and automatic) etc. Diagnose, adjust, and repair various types of vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas only), Transmissions (manual and automatic), Clutches, Differentials, etc. Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as scanners and pressure gauges. Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives. Independently determining parts required for each job, ordering, and picking up the parts for installation. Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT. Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders (“RO”) using company provided cellphone and on paper. Accurately complete DOT forms and all other forms of documentation in a timely fashion, as applicable. Maintain a clean and safe work environment. Assist in cleanup at the end of each day for tools, parts, and equipment. Apply knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job. Work with support team to assess customer needs, provide information or assistance, resolving their problems, or satisfying their expectations. Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations. Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards. Maintain a high level of productivity and be able to work within or close to most Standard Repair Times. Communicate with support team in corporate offices to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes. Participate and complete all-in company safety training. Maintain assigned service vehicle, conduct safety checks and daily pre/post trip inspections. Adhere to company policies, processes, and procedures. REQUIREMENTS High School Diploma or GED preferred. Safe drivers needed; valid driver's license . Possess and supply a set of hand tools necessary to perform required job duties. Minimum of one (1) year of experience as an Automotive Technician on light/medium vehicle repair or equivalent combination of technical education/certifications/skill/experiences. 2 years of equivalent experience in a similar capacity Technician role. Participate in and complete all-in company required training. SKILLS & ABILITIES Understand the implications of new information for both current and future problem-solving and decision-making. Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. Ability to determine the type of tools and equipment needed. Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. WHY Cox Fleet? Flat Rate. $25.00 to $30.00+ per hour based on experience and location. (Paid weekly) Technical training provided to advance your career. Dedicated career path - ‘Over 50% of our front-line managers are promoted from within'. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Light Medium Tech II - Non-DOT Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Compensation Hourly base pay rate is $24.23 - $36.35/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description * If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS2 to ************ * Fleet Services by Cox Automotive keeps your fleet moving. Headquartered in Indianapolis, Fleet Services by Cox Automotive (FSCA) has grown to become one of the largest fleet maintenance companies in the country. FCSA is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. FCSA also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. JOB SUMMARY FCSA is currently hiring a Light/Medium Duty Automotive Technician to join our recently acquired company, Corcoran Fleet Services, to support our combined future growth. If you're looking for a new place to call home, we would love to talk with you. The Light/Medium Duty Automotive Technician will be responsible for performing Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, licensed DOT inspections, and other duties as assigned at our customer locations. Light/Medium Duty Automotive Technician continues to learn additional advanced mechanical skills and diagnostic Techniques. A successful Light/Medium Duty Automotive Technician complies with all company policies and achieves high level performance metrics. * You will work on various light/medium duty vehicles such as F150, F250, and F350, including some specialty equipment etc. * Travel is required 100% of the time. This position will service multiple customers in your area and around the state, depending on customer concentration. * A rotating schedule of Mon-Fri the first week and Mon-Sat the second week (Home every day) * This is a Flat Rate Position with abundance of work available. DUTIES * Always follow and comply with safe operating practices and procedures. * Travel to and perform work at customer location, with most of the work performed outside. * Perform scheduled preventative maintenance ("PM"), DOT Inspections and follow up repairs on light and medium vehicles in the field. * Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment. * Use hand tools, precision instruments, as well as some Diesel tools, lifts, and jacks. * Perform minor adjustment and repairs on various types of customer vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Engines (gas only), Transmissions (manual and automatic) etc. * Diagnose, adjust, and repair various types of vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas only), Transmissions (manual and automatic), Clutches, Differentials, etc. * Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as scanners and pressure gauges. * Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives. * Independently determining parts required for each job, ordering, and picking up the parts for installation. * Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT. * Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders ("RO") using company provided cellphone and on paper. * Accurately complete DOT forms and all other forms of documentation in a timely fashion, as applicable. * Maintain a clean and safe work environment. Assist in cleanup at the end of each day for tools, parts, and equipment. * Apply knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job. * Work with support team to assess customer needs, provide information or assistance, resolving their problems, or satisfying their expectations. * Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations. * Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards. * Maintain a high level of productivity and be able to work within or close to most Standard Repair Times. * Communicate with support team in corporate offices to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes. * Participate and complete all-in company required safety training. * Maintain assigned service vehicle, conduct safety checks and daily pre/post trip inspections. * Adhere to company policies, processes, and procedures. REQUIREMENTS * High School Diploma or GED preferred. * Safe drivers needed; valid driver's license required. * Possess and supply a set of hand tools necessary to perform required job duties. * Minimum of one (1) year of experience as an Automotive Technician on light/medium vehicle repair or equivalent combination of technical education/certifications/skill/experiences. * 2 years of equivalent experience in a similar capacity Technician role. * Participate in and complete all-in company required training. SKILLS & ABILITIES * Understand the implications of new information for both current and future problem-solving and decision-making. * Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work * Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. * Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. * Ability to determine the type of tools and equipment needed. * Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. * Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. WHY Fleet Services by Cox Automotive? * Flat Rate. $25.00 to $30.00+ per hour based on experience and location. (Paid weekly) * Technical training provided to advance your career. * Dedicated career path - 'Over 50% of our front-line managers are promoted from within'. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Audiovisual Integration Technician CTI has been a leading AV provider for over 36 years. Since we began in 1988, our mission has been simple: to provide a fantastic customer experience. At CTI, our biggest asset is our people, and we know that sometimes the most awesome employees don't fit the typical mold. If you are hardworking, friendly, and know the importance of fantastic customer service, you could be a good fit at CTI. We have developed a collaborative and lively working environment, where the best and the brightest show up to work each day ready to have fun and employ their passion for and knowledge of technology in everything they do. This creative atmosphere helps us apply and share our skills with our clients, who seek quality, high-end AV and Conference Solutions. So, what are we looking for? We are looking for an AV Integration Technician for our Columbus branch whose attitude, skills, and work ethic will embody our mission “to provide a fantastic customer experience”. Somebody who is passionate about AV, whether you are the go-to expert in your home, school, or church, and can always find a solution to any AV problem, or you are interested in working towards becoming that person, we will provide the necessary training, support, and work environment to help you succeed. We take pride in our employees, who are known in the industry as customer-focused problem-solvers who can get the job done. What are your responsibilities? - Install audio, video, control systems, video conferencing equipment, etc. - Rack fabrication - Pull and terminate a variety of cables - Read drawings/blueprints - Service and system maintenance - Other tasks as assigned Will you fit in? -Our employees fearlessly embrace the company culture and applicants who merely want to punch in their timecards every day are not what we are looking for. -You can work independently with minimal guidance but aren't afraid to ask the right questions when you need help. -You have strong verbal and written communication skills and can be the face of our company to our clients. Does experience count? - Education: Associates degree is preferred, but not required. We will take into account your experience/skill level and what you bring to the table as an individual. -Customer Service Experience: A must! As you can see our customers are #1 and we need someone who can take care of them and treat them as such. -Attitude and Aptitude: Are key! We need someone who is eager to learn and comes to work ready to tackle any situation. -AV/IT Networking: 2+ years of audio-visual installation experience preferred, but not required. - Must be able to lift over 50 pounds over your head, have a valid driver's license, and the ability to pass a Motor Vehicle Check and a Criminal Background Check What's in it for you? At CTI, we know our company's success is directly correlated to the success of our employees. So, it's fitting that we thrive on and encourage employee growth, both professionally and personally. Our competitive compensation package includes: -A competitive base salary (DOE) -Employer-matched medical and dental insurance. We also offer Vision Insurance and Prescription Drug Coverage (available after 60 days of employment). -Employer matched 401K up to 3% (after 6 months of employment). -Bonus eligibility based on a results-oriented incentive plan (after 3 months of employment). -A graduated PTO program, all major holidays off, and three “floating” holidays, available upon the first day of employment. -Special gifts for significant life events, such as marriage, childbirth, and house buying. -Cell phone reimbursement plan. -Long and Short Term Disability, and Life Insurance 100% paid by CTI. -And more! CTI is an equal-opportunity employer. We do not and shall not discriminate based on race, color, religion, gender, age, national origin, disability, marital status, sexual orientation, or military status in any of its activities or operations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire.

OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Tier 2 Audio Visual Field Technician, you will play a key role in supporting our project delivery teams by installing and maintaining a wide variety of AV technologies across client sites. You will be responsible for ensuring high-quality installations, troubleshooting technical issues, and maintaining strong communication with project stakeholders. **THIS POSITION REQUIRES UP TO 70% TRAVEL. KEY RESPONSIBILITIES: Provide daily reporting to the Project Management team. Install a wide variety of AV technology in both existing and new build project sites. Perform cable management and layout planning for 1st fix hardware, including bracketry and ceiling speaker hardware. Ensure compliance with general contract requirements during installations. Apply knowledge of low voltage electrical concepts. Utilize basic carpentry and installation skills. Operate power tools safely and effectively. Diagnose, troubleshoot, and resolve technical problems. Travel to other sites as needed to support projects and installations. ESSENTIAL CRITERIA: Experience with AV systems such as Crestron, Extron, QSYS, or Cisco. Understanding of signal flow and AV rack building to AVIXA standards. Familiarity with AV industry cabling and connector termination. Strong sense of urgency and agility in dynamic environments. Excellent customer interaction skills and professionalism. Ability to work independently in high-pressure, fast-paced settings. Commitment to ongoing technical development. Willingness and eligibility to travel and work globally. Strong organizational and time management skills. Effective written and verbal communication. Critical thinking and problem-solving abilities. Flexibility and adaptability to changing work hours and customer needs. Team-oriented mindset. Valid driver's license. DESIRABLE CRITERIA: 1-3 years of experience in the AV/VC industry. Deeper knowledge of signal flow and AV installation. Familiarity with Cisco, Extron, Crestron, or QSYS systems. AVIXA CTS or CTS-I certification. OSHA 10/30 or SST certification. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. Pay Range$32-$41 USD

Job Description About the Role: The Audio Visual Event Technician plays a critical role in the successful execution of live events by managing and operating audio and visual equipment to ensure high-quality sound and visual experiences. This position requires the technician to collaborate closely with event planners, clients, and other technical staff to set up, test, and troubleshoot AV systems before and during events. The technician is responsible for maintaining equipment, ensuring compliance with safety standards, and adapting quickly to any technical challenges that arise in dynamic event environments. By delivering seamless AV support, the technician enhances audience engagement and contributes to the overall success and professionalism of each event. This role demands a proactive approach, technical expertise, and excellent communication skills to meet the diverse needs of events across various venues and formats. Minimum Qualifications: High school diploma or equivalent. Proven experience in operating and troubleshooting audio and visual equipment in a live event setting. Basic understanding of sound engineering principles and video projection systems. Ability to lift and move heavy equipment and work flexible hours including evenings and weekends. Strong problem-solving skills and attention to detail. Preferred Qualifications: Associate degree or certification in audio engineering, broadcast technology, or a related field. Experience with digital mixing consoles, lighting control systems, and video editing software. Familiarity with networked AV systems and wireless microphone technology. Previous experience working in diverse event environments such as conferences, concerts, and corporate meetings. Responsibilities: Set up, operate, and dismantle audio and visual equipment including microphones, speakers, projectors, lighting, and video displays for live events. Conduct thorough testing and troubleshooting of AV systems prior to event start times to ensure optimal performance. Collaborate with event coordinators and clients to understand specific AV requirements and customize setups accordingly. Monitor and adjust audio and visual equipment during events to maintain quality and address any technical issues promptly. Maintain and inventory AV equipment, performing routine maintenance and reporting any malfunctions or needs for repair. Ensure compliance with all safety regulations and best practices related to electrical and AV equipment handling. Provide technical support and training to other staff or clients as needed to facilitate smooth event operations. Skills: The required skills enable the technician to efficiently set up and operate complex AV systems, ensuring clear sound and crisp visuals that meet client expectations. Troubleshooting skills are essential for quickly diagnosing and resolving technical issues during live events, minimizing disruptions. Communication skills facilitate effective collaboration with event teams and clients to tailor AV solutions to specific event needs. Preferred skills such as knowledge of digital consoles and networked systems allow the technician to work with advanced technology, enhancing event production quality. Additionally, organizational skills help in managing equipment inventory and maintenance schedules, ensuring reliability and readiness for every event.

Sinclair's content technology is at the core of our operational excellence. We thrive on innovation and a passion for connecting people with the best local news and sports content. As we grow our content offerings and expand our broadcast, cable, and digital distribution channels, we are embracing modern technologies to fuel that growth. We are excited by the promise of cloud-first approaches and artificial intelligence in media systems. Sinclair believes that flexibility and agility will address rapidly changing media environments and we are confident that great people and great technology equal great solutions. The role of Master Control Operator is responsible for operating the multi-channel and multi-brand control point for Sinclair Television Stations located in Columbus, OH. Duties include, but are not limited to, Live event operations, graphics insertion, playlist manipulation, and monitoring on-air quality of the TV Station to ensure all content airs accurately and reflects the traffic and programming schedules. Additional responsibilities include but are not limited to: Understand and follow standard operating procedures for various networks, including high profile live events and disaster recovery. Modification and verification of playlists for current and future broadcast times. Manipulate playlist for the different “join in progress” scenarios. Consistently monitor on-air material and communicate any discrepancies to Managers. Consistently ensure that playlist information and media content are accurate, which may include but is not limited to: SOM/EOM of segments Database Information Audio specifications Video specifications Secondary events (GPI,SCTE104 and Graphic Insertion) Content Closed Captioning Active Format Descriptor. Ensure proper video routing. Record, Ingest and Prepare content for playout. Monitor equipment for performance / device failures. Capture and document network processes such as timing of log elements, program run times and on air discrepancies. Setup and review content prior to scheduled airtime. Communicate effectively with Managers and Operators to ensure a smooth transition between shifts. Performs other duties as assigned. Understand and follow departmental policies. Qualifications: Minimum 1 Year experience in Master Control Operations functions. Experience in Local TV Station Operations. (A PLUS) Experience in Switching Live Local News and Sporting Events. (A PLUS) Must have great attention to detail and ability to multitask, monitoring multiple playlists and video monitors simultaneously. General understanding of industry regulations and standards for video, audio, captioning and loudness. Understanding of broadcast technology such as switchers, server playout, automation systems, waveform monitors and rasterizers. Ability to communicate effectively, work under stress and perform as part of a team. Aptitude for operating electronic equipment and the capability to learn specialized applications. Experience with Systems and Hardware for Content Ingest, Playout and Distribution. Knowledge of Amagi CLOUDPORT Automation system. (A PLUS) Available to work any shift in a 24/7 Operation as well as holidays and weekends. Knowledge of Microsoft Office Suite. Sinclair is proud to be an equal opportunity employer and a drug free workplace. Employment practices will not be influenced or affected by virtue of an applicant's or employee's race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, military or veteran status or any other characteristic protected by law. About Us Sinclair, Inc. (Nasdaq: SBGI) is a diversified media company and a leading provider of local news and sports. The Company owns, operates and/or provides services to 178 television stations in 81 markets affiliated with all major broadcast networks; owns Tennis Channel, the premium destination for tennis enthusiasts; multicast networks CHARGE, Comet, ROAR and The Nest. Sinclair's AMP Media produces a growing portfolio of digital content and original podcasts. Additional information about Sinclair can be found at ************* About the Team The life-blood of our organization is our people. We have a compelling story, a goal-oriented culture, and we take really good care of people. How good? Here is a glimpse: great benefits, open door policy, upward mobility and a strong desire to see you succeed. Ready to be part of a winning team? Let's talk.

Working at Moraine Park Technical College is much more than a job. It's an opportunity to help influence the future of higher education. At MPTC, we are in a unique position to impact our district communities, and we work diligently to hire candidates with aligned values and extensive skillsets to help move the mission of Moraine Park forward. Position Summary: Moraine Park Technical College is seeking a full time Audio Video Technician on the West Bend Campus. This position is responsible for the administration, design, engineering, programming, troubleshooting, and support of all College classroom and event audio/video systems, including video conferencing technologies. This position ensures reliable operation and user support for faculty and staff across instructional and event environments. The successful candidate will have an associate degree in Information Technology, a related field, or equivalent combination of education and experience in an AV-related field and one year of experience to include any of the following, video conferencing/collaboration technologies, audio/video, and presentation systems. Responsibilities: Design and engineer AV systems for new or renovated instructional and event spaces. Collaborate with Faculty and staff to assess AV needs and recommend annual upgrades. Lead the engineering, procurement, and installation of approved AV solutions. Administer AV endpoints including monitoring, software and firmware updates, and troubleshooting. Maintain overall system health and ensure optimal performance of AV infrastructure. Assist faculty, staff, and external groups with Classroom and Event AV Systems. Provide advanced support for AV -related issues. Ensure reliable AV setup and support for college events. Develop and maintain code for AV control systems. Program new systems and modify existing systems to meet evolving instructional and event needs. Conduct orientation and training for employees on video conferencing, collaboration technologies, and college audio/video systems. Provide support to the college's desktop computing environment as needed. Experience & Qualifications (in addition to those listed in the summary above) : Strong working knowledge of video conference, audio, video, and event presentation systems. Strong troubleshooting skills, complex problem solving, and ability to work under pressure. Knowledge of general and AV software applications, including Microsoft Office 365, with emphasis on Microsoft Teams, Microsoft Teams Rooms, QSYS Designer, and Extron PCS. Excellent written and verbal communication skills to communicate clearly and effectively with end users, colleagues, and management to provide a complete and timely explanation of issues and decisions to ensure customer satisfaction. Strong organizational and time management skills, including the ability to prioritize special projects with routine assignments. Ability to establish and maintain effective working relationships with internal and external customers. Ability to collaborate and work effectively as part of a team. Demonstrated ability to work effectively with diverse populations by promoting and maintaining an inclusive work environment and culture that is respectful and accepting of diversity. Other Position Requirements: Ability to climb ladders. Ability to lift up to 50 pounds. Ability to operate a variety of hand tools. Must possess a valid driver's license. Ability to travel to College and external partner locations. Hiring Range: $26.95-$31.25 Starting: Immediately Workplace Flexibility: Limited work from home upon approval Hours/Schedule/Travel: Academic: Monday - Thursday, 11:00 a.m. - 7:00 p.m., Friday, 8:00 a.m. - 4:00 p.m. (37.5 hrs) Summer: Monday - Thursday, 10:00 a.m. - 7:00 p.m. (34hrs) Benefits information: Please click here for a summary of our benefits.

ICS is hiring A/V Service Technicians! Industrial Communication & Sound (ICS) (*************** is an award-winning, full-service Audio Visual and Security Integration firm with locations in Columbus and Cincinnati. ICS is a subsidiary of CTL Engineering (*************** - a full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC and VA with a rich history over our (97) years in business. We provide civil/site design and land surveying, environmental, geotechnical, construction administration & inspection, accident reconstruction, bridge/roadway design, roofing/building envelope, A/V system design, troubleshooting and installation , and specialized testing services to the construction industry. We are looking for skilled Audio/Video Service Technicians (low voltage) who will play a key role in the planning and installation of cutting-edge AV and low voltage system solutions for our regional clients. You'll leverage your expertise in AV technology and creative problem-solving skills while collaborating closely with institutions/municipal agencies, Architects, Engineers, and project teams to deliver customized AV designs that exceed expectations. From involvement in the concept development and/or troubleshooting to final installation, this role will guide projects through every stage of the process, ensuring seamless integration, installation, and optimal performance. If you are passionate about staying ahead of industry trends, enjoy problem-solving, and have a creative approach to designing audio/video solutions, we want to hear from you! This is more than a job posting … it's an invitation to bring your expertise to a company where innovation and passion converge seamlessly. Highlights: ** No extensive travel - our clients are regional, typically within a 90 minute radius, but primarily within 30-60 min travel time.** * A company truck will be provided. Our new Corporate Headquarters is located in New Albany, OH. Responsibilities: The Service Technician will be responsible for running day to day operations on the job site as well as programming CCTV, Access Control and Security Systems for Corporations, Educational Facilities, Museums, Municipalities, and Houses of Worship. You will work independently under the direction of a Department Manager. Troubleshoot systems that are not working correctly and provide necessary repairs needed to correct the deficiency. Terminate and install devices, headend and program various access control, CCTV, and security systems. Knowledge, Skills and Abilities: Strong Knowledge/Experience servicing surveillance systems-Ip and analog is required. Knowledge/Experience with Software House, AMAG and other access control systems is strongly preferred. Strong customer service skills and past customer service experience. Good communication skills, both verbally and in writing. Experience/skills in sales. Ability to problem solve. Must be reliable, on time, a team player, quality minded, and detail oriented. Qualifications: 5+ years of experience in the Low voltage, AV, Security, Access Control, Intrusion, Surveillance industries. 2-4-year technical degree or vocational certification is preferred. Benefits: CTL Engineering offers a competitive compensation and benefits package including medical, life, and disability insurance, paid time off, an award-winning ESOP ( Employee Stock Ownership Plan ), and a 401K plan. CTL Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Strong process improvement & safety mentality Ability to multitask and handle multiple simultaneous assignments Self-motivated Demonstrated problem solving and organizational skills Demonstrated troubleshooting/Root Cause Analysis skills Ability to work a 12-hour rotating shift (including evenings, weekends and holidays) and/or respond to callouts as necessary The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions Intermediate computer skills such as: opening, creating and updating content in MS Word documents and Excel spreadsheets and using CMMS system for plant PM's is required Minimum 3 years' experience operating Siemens DCS Control System or compatible control system Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., work in adverse weather conditions A minimum of a high school diploma and 6 years operations experience as a process field operator or 3 years' experience in similar role The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required Safely monitor, maintain, and operate all process equipment to efficiently meet the requirements stated in the Daily Operating Instructions, Key Operating Parameters, and Standard Operating Procedures Maintain unit Safety and housekeeping standards Evaluate process variables, sample results, and equipment diagnostic information to identify and initiate changes and/or corrections to maintain safety, efficiency and optimum control of the unit and equipment Monitor unit operation and take appropriate action to ensure compliance with all applicable policies, procedures, laws, regulations, and Company standards as they pertain to Environmental, Health and Safety Start-up/Shutdown of plant equipment Adjust controls to operate equipment in the recommended or prescribed operating ranges De-pressure equipment, lines and vessels as need for maintenance and daily operations Read, monitor and record various operating conditions such as pressure, temperature, hours of operations, fuel consumed, water levels, etc. Ensure regulatory compliance and record keeping requirements are met and continually monitored Visually inspect equipment and controls at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication Follow procedures at all times according to all Standard Operating Procedures and plant procedures Implement and carryout LO/TO procedures to accommodate operations daily needs Adhere to all OSHA and plant mandated HSE (Health, Safety, and Environmental) policies Safety Awareness: Ability to recognize and identify potential hazards. Evaluates changes in work environment with respect to impact on safety of self and others. Understands potential threats created by deviation from safety procedures and improper use of tools and equipment. Uses personal protection equipment. Uses tools and equipment in compliance with manuals and training. Calls attention to potential and actual hazardous conditions as they arise. Demonstrates knowledge of lockout/tag out procedures. Stops work if there are unsafe working conditions.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Light Medium Tech II - Non-DOT Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Compensation Hourly base pay rate is $24.23 - $36.35/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description *** If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS2 to ************ *** Fleet Services by Cox Automotive keeps your fleet moving. Headquartered in Indianapolis, Fleet Services by Cox Automotive (FSCA) has grown to become one of the largest fleet maintenance companies in the country. FCSA is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. FCSA also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. JOB SUMMARY FCSA is currently hiring a Light/Medium Duty Automotive Technician to join our recently acquired company, Corcoran Fleet Services, to support our combined future growth. If you're looking for a new place to call home, we would love to talk with you. The Light/Medium Duty Automotive Technician will be responsible for performing Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, licensed DOT inspections, and other duties as assigned at our customer locations. Light/Medium Duty Automotive Technician continues to learn additional advanced mechanical skills and diagnostic Techniques. A successful Light/Medium Duty Automotive Technician complies with all company policies and achieves high level performance metrics. You will work on various light/medium duty vehicles such as F150, F250, and F350, including some specialty equipment etc. Travel is required 100% of the time. This position will service multiple customers in your area and around the state, depending on customer concentration. A rotating schedule of Mon-Fri the first week and Mon-Sat the second week (Home every day) This is a Flat Rate Position with abundance of work available. DUTIES Always follow and comply with safe operating practices and procedures. Travel to and perform work at customer location, with most of the work performed outside. Perform scheduled preventative maintenance (“PM”), DOT Inspections and follow up repairs on light and medium vehicles in the field. Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment. Use hand tools, precision instruments, as well as some Diesel tools, lifts, and jacks. Perform minor adjustment and repairs on various types of customer vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Engines (gas only), Transmissions (manual and automatic) etc. Diagnose, adjust, and repair various types of vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas only), Transmissions (manual and automatic), Clutches, Differentials, etc. Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as scanners and pressure gauges. Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives. Independently determining parts required for each job, ordering, and picking up the parts for installation. Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT. Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders (“RO”) using company provided cellphone and on paper. Accurately complete DOT forms and all other forms of documentation in a timely fashion, as applicable. Maintain a clean and safe work environment. Assist in cleanup at the end of each day for tools, parts, and equipment. Apply knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job. Work with support team to assess customer needs, provide information or assistance, resolving their problems, or satisfying their expectations. Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations. Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards. Maintain a high level of productivity and be able to work within or close to most Standard Repair Times. Communicate with support team in corporate offices to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes. Participate and complete all-in company required safety training. Maintain assigned service vehicle, conduct safety checks and daily pre/post trip inspections. Adhere to company policies, processes, and procedures. REQUIREMENTS High School Diploma or GED preferred. Safe drivers needed; valid driver's license required. Possess and supply a set of hand tools necessary to perform required job duties. Minimum of one (1) year of experience as an Automotive Technician on light/medium vehicle repair or equivalent combination of technical education/certifications/skill/experiences. 2 years of equivalent experience in a similar capacity Technician role. Participate in and complete all-in company required training. SKILLS & ABILITIES Understand the implications of new information for both current and future problem-solving and decision-making. Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. Ability to determine the type of tools and equipment needed. Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. WHY Fleet Services by Cox Automotive? Flat Rate. $25.00 to $30.00+ per hour based on experience and location. (Paid weekly) Technical training provided to advance your career. Dedicated career path - ‘Over 50% of our front-line managers are promoted from within'. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship.Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.

Company Cox Automotive - USA Job Family Group Vehicle Operations Job Profile Mobile Light Medium Tech II - Non-DOT Management Level Individual Contributor Flexible Work Option Can work remotely but need to live in the specified city, state, or region Travel % Yes 100% of the time Work Shift Variable Compensation Hourly base pay rate is $24.23 - $36.35/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Job Description * If you have any questions or to connect with a recruiter while your application is being reviewed, please Text DFS2 to ************ * Fleet Services by Cox Automotive keeps your fleet moving. Headquartered in Indianapolis, Fleet Services by Cox Automotive (FSCA) has grown to become one of the largest fleet maintenance companies in the country. FCSA is the leading provider of on-site mobile maintenance and repair services nationwide, offering mobile on-site fleet service for light medium, and heavy-duty trucks and trailers. FCSA also services customers utilizing its 50+ nationwide service centers; each offering accident repair, painting, refurbishment, and heavy mechanical repair. We are supported by a 24/7 in-house call-center and provide scheduled maintenance services and unscheduled services to fleets anywhere, anytime. JOB SUMMARY FCSA is currently hiring a Light/Medium Duty Automotive Technician to join our recently acquired company, Corcoran Fleet Services, to support our combined future growth. If you're looking for a new place to call home, we would love to talk with you. The Light/Medium Duty Automotive Technician will be responsible for performing Preventative Maintenance inspections, light and follow-up repairs, light mechanical/hydraulic/electrical and electronic diagnostics, licensed DOT inspections, and other duties as assigned at our customer locations. Light/Medium Duty Automotive Technician continues to learn additional advanced mechanical skills and diagnostic Techniques. A successful Light/Medium Duty Automotive Technician complies with all company policies and achieves high level performance metrics. * You will work on various light/medium duty vehicles such as F150, F250, and F350, including some specialty equipment etc. * Travel is required 100% of the time. This position will service multiple customers in your area and around the state, depending on customer concentration. * A rotating schedule of Mon-Fri the first week and Mon-Sat the second week (Home every day) * This is a Flat Rate Position with abundance of work available. DUTIES * Always follow and comply with safe operating practices and procedures. * Travel to and perform work at customer location, with most of the work performed outside. * Perform scheduled preventative maintenance ("PM"), DOT Inspections and follow up repairs on light and medium vehicles in the field. * Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment. * Use hand tools, precision instruments, as well as some Diesel tools, lifts, and jacks. * Perform minor adjustment and repairs on various types of customer vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Engines (gas only), Transmissions (manual and automatic) etc. * Diagnose, adjust, and repair various types of vehicles, trucks, and equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas only), Transmissions (manual and automatic), Clutches, Differentials, etc. * Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as scanners and pressure gauges. * Identify problems, determine accuracy and relevance of information, using sound judgment to generate and evaluate alternatives. * Independently determining parts required for each job, ordering, and picking up the parts for installation. * Perform all work in compliance with organizational safety, health and environmental policies, and federal regulations, to include OSHA, EPA, and DOT. * Document according to company standards and upload pictures of work performed, parts used, and all findings observed on Repair Orders ("RO") using company provided cellphone and on paper. * Accurately complete DOT forms and all other forms of documentation in a timely fashion, as applicable. * Maintain a clean and safe work environment. Assist in cleanup at the end of each day for tools, parts, and equipment. * Apply knowledge that is acquired through formal training or on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job. * Work with support team to assess customer needs, provide information or assistance, resolving their problems, or satisfying their expectations. * Manage concurrent assigned tasks, making effective judgments as to prioritizing work related activities and time allocations. * Act with integrity, demonstrate honesty and keep commitments. Behave in a consistent manner, keeping sensitive information confidential and adhering to ethical and professional standards. * Maintain a high level of productivity and be able to work within or close to most Standard Repair Times. * Communicate with support team in corporate offices to obtain approvals on repair estimates, retrieve purchase order numbers and/or discuss RO findings notes. * Participate and complete all-in company required safety training. * Maintain assigned service vehicle, conduct safety checks and daily pre/post trip inspections. * Adhere to company policies, processes, and procedures. REQUIREMENTS * High School Diploma or GED preferred. * Safe drivers needed; valid driver's license required. * Possess and supply a set of hand tools necessary to perform required job duties. * Minimum of one (1) year of experience as an Automotive Technician on light/medium vehicle repair or equivalent combination of technical education/certifications/skill/experiences. * 2 years of equivalent experience in a similar capacity Technician role. * Participate in and complete all-in company required training. SKILLS & ABILITIES * Understand the implications of new information for both current and future problem-solving and decision-making. * Ability to lift, bend, climb, stand, and walk for long periods of time; ability to perform moderately heavy laboring work * Ability to exert oneself physically over long periods of time without tiring, which may include performing repetitive tasks. * Communicates information (for example, facts, ideas, or messages) in a succinct and organized manner. Engages in effective two-way communication with individuals and groups. * Ability to determine the type of tools and equipment needed. * Ability to accurately judge which of several objects is closer or farther away from the observer, or the distance between an object and the observer. * Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. WHY Fleet Services by Cox Automotive? * Flat Rate. $25.00 to $30.00+ per hour based on experience and location. (Paid weekly) * Technical training provided to advance your career. * Dedicated career path - 'Over 50% of our front-line managers are promoted from within'. Benefits Employees are eligible to receive a minimum of 6.67 hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. About Us Through groundbreaking technology and a commitment to stellar experiences for drivers and dealers alike, Cox Automotive employees are transforming the way the world buys, owns, sells - or simply uses - cars. Cox Automotive employees get to work on iconic consumer brands like Autotrader and Kelley Blue Book and industry-leading dealer-facing companies like vAuto and Manheim, all while enjoying the people-centered atmosphere that is central to our life at Cox. Benefits of working at Cox may include health care insurance (medical, dental, vision), retirement planning (401(k)), and paid days off (sick leave, parental leave, flexible vacation/wellness days, and/or PTO). For more details on what benefits you may be offered, visit our benefits page. Cox is an Equal Employment Opportunity employer - All qualified applicants/employees will receive consideration for employment without regard to that individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. Cox provides reasonable accommodations when requested by a qualified applicant or employee with disability, unless such accommodations would cause an undue hardship. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. No OPT, CPT, STEM/OPT or visa sponsorship now or in future.