Boilermaker mechanic job description
Updated March 14, 2024
7 min read
Find better candidates in less time
Post a job on Zippia and take the best from over 7 million monthly job seekers.
Example boilermaker mechanic requirements on a job description
Boilermaker mechanic requirements can be divided into technical requirements and required soft skills. The lists below show the most common requirements included in boilermaker mechanic job postings.
Sample boilermaker mechanic requirements
- Must have a valid Boilermaker Mechanic license.
- Must have a valid driver’s license.
- Must have a valid first-aid and CPR certification.
- Must have a minimum of three years of experience in Boilermaker Mechanic.
- Must be able to lift and carry heavy loads.
Sample required boilermaker mechanic soft skills
- Ability to work independently and as part of a team.
- Strong problem-solving skills.
- Good communication and interpersonal skills.
- Ability to work under pressure and meet deadlines.
- Excellent attention to detail.
Boilermaker mechanic job description example 1
BAE Systems boilermaker mechanic job description
Job Description BAE Systems - Norfolk Ship Repair is seeking a mechanic with boilermaker background. The successful candidate will experience a non-routine environment. There is always something new to learn and see here. In the facilities department, our task is to maintain all rolling equipment, centrifugal, turbine, injector, diaphragm, and closed coupled pumps, boilers, air compressors, generators and associated piping and equipment.Required Education, Experience, & Skills High School Diploma/GED
5-10 years experience in maintaining equipment
General knowledge of small engines
General knowledge of diesel engines
Great communication skills Preferred Education, Experience, & Skills Blueprint reading
Diesel Mechanic
Boilermaker Experience
About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. At BAE Systems, we celebrate the array of skills, experiences, and perspectives our employees bring to the table. For us, differences are a source of strength. We're laser-focused on high performance, and we work hard every day to nurture an inclusive culture where all employees can innovate and thrive. Here, you will not only build your career, but you will also enjoy work-life balance, uncover new experiences, and collaborate with passionate colleagues.
5-10 years experience in maintaining equipment
General knowledge of small engines
General knowledge of diesel engines
Great communication skills Preferred Education, Experience, & Skills Blueprint reading
Diesel Mechanic
Boilermaker Experience
About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. At BAE Systems, we celebrate the array of skills, experiences, and perspectives our employees bring to the table. For us, differences are a source of strength. We're laser-focused on high performance, and we work hard every day to nurture an inclusive culture where all employees can innovate and thrive. Here, you will not only build your career, but you will also enjoy work-life balance, uncover new experiences, and collaborate with passionate colleagues.
Post a job for free, promote it for a fee
Boilermaker mechanic job description example 2
Matrix Service boilermaker mechanic job description
* Receives and understands instructions regarding work assignment in shop and field.
* Interprets drawings and sketches, plans details of working procedure for tool and material requirements.
* Selects materials according to suitability for job engineering standards.
* Makes layout for structural members, plate work, pressure vessels, and miscellaneous fabrication.
* Uses straightedges, trammels, dividers, squares, tapes, shop formulae and elementary geometry to locate lines, centers, angles, bends and radii, make allowances for shrinkage, expansion, load and stress as identified by design engineer.
* Makes field sketches and measurements on repair and construction jobs.
* Operates shop machines such as pantograph, bending rolls, plate shear, punch press, to fabricate parts.
* Uses wrenches, air hammer, dolly, portable drills, reamers, grinders and burning torch for fitting and bolting assemblies.
* Performs bolting or otherwise connects or fastens beams, plates, channels, angles and shapes.
* Uses block and tackle, hoist, and winches, for handling heavy assemblies.
* Dismantles, installs, repairs and erects fabricated steel structures in connection with any type of boiler and pressure vessel work.
* Checks and performs hydrostatic or pneumatic tests on boiler tubes and pressure vessels.
* Performs all aspects of heat exchanger services.
* Hand signals cranes as required.
* Familiar with shop equipment such as rolls, sheers, drill presses, band saws, etc.
* Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
* Perform all other job related duties as requested by supervision.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of three (3) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to complete the NCCER certification for your craft. Completed the Matrix Service Safety Orientation Plus Safety training, Process Safety Management training and Client / Site specific training. To obtain and maintain an active status within the drug testing program.
EEO/M/F/D/V/Affirmative Action Employer
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex or national origin.
* Interprets drawings and sketches, plans details of working procedure for tool and material requirements.
* Selects materials according to suitability for job engineering standards.
* Makes layout for structural members, plate work, pressure vessels, and miscellaneous fabrication.
* Uses straightedges, trammels, dividers, squares, tapes, shop formulae and elementary geometry to locate lines, centers, angles, bends and radii, make allowances for shrinkage, expansion, load and stress as identified by design engineer.
* Makes field sketches and measurements on repair and construction jobs.
* Operates shop machines such as pantograph, bending rolls, plate shear, punch press, to fabricate parts.
* Uses wrenches, air hammer, dolly, portable drills, reamers, grinders and burning torch for fitting and bolting assemblies.
* Performs bolting or otherwise connects or fastens beams, plates, channels, angles and shapes.
* Uses block and tackle, hoist, and winches, for handling heavy assemblies.
* Dismantles, installs, repairs and erects fabricated steel structures in connection with any type of boiler and pressure vessel work.
* Checks and performs hydrostatic or pneumatic tests on boiler tubes and pressure vessels.
* Performs all aspects of heat exchanger services.
* Hand signals cranes as required.
* Familiar with shop equipment such as rolls, sheers, drill presses, band saws, etc.
* Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
* Perform all other job related duties as requested by supervision.
SKILLS, KNOWLEDGE, QUALIFICATIONS & EXPERIENCE:
Minimum of three (3) years or more in refinery maintenance/turnaround/or construction experience. A general knowledge of basic hand tools. Must be able to complete the NCCER certification for your craft. Completed the Matrix Service Safety Orientation Plus Safety training, Process Safety Management training and Client / Site specific training. To obtain and maintain an active status within the drug testing program.
EEO/M/F/D/V/Affirmative Action Employer
All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex or national origin.
Dealing with hard-to-fill positions? Let us help.
Boilermaker mechanic job description example 3
Zachry Construction boilermaker mechanic job description
Position Summary: Zachry is currently accepting applications for Industrial Boilermaker Journeyman for upcoming work at OG&E River Valley in Panama, OK.
This position will consist of but not limited to repair and/or demolition to boiler components.
Position Responsibilities:
* Repair or replace defective pressure vessel parts, such as safety valves or regulator.
* Demolition and Structural Fitting
* Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place
* Study Blue prints to determine locations, relationships or dimensions of parts
* Follows direction from supervisor
* Other duties as assigned
* Minimum 4-5 years industrial Maintenance
* Must be familiar with industrial power and hand tools
Essential Skills, Knowledge, and Abilities:
* Proficient mechanical skills
* Knowledge of machines and tools, including their designs, uses, repair, and maintenance
* Able to communicate items of concern found during inspections and walk downs
* Knowledge of industrial machinery and equipment
* Organization and time management
* Must have good aptitude and manual dexterity
* Good reading comprehension
* Ability to work with others - team player
* Good communication skills with co-workers and supervisors
* Commitment to Zachry values and safety rules and regulations
* Must have experience using industrial hand tools and power tools
* Must have reliable transportation
* Knowledge of safety practices to operated equipment
Valued but not required skills, knowledge, and abilities:
* Former Zachry employee
* Training in vocational schools or related on the job experience.
Physical demands and work environment:
Physical Demands - Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. Give full attention to what other people are saying, taking time to understand directions. May be required to lift, carry and move objects safely. Will work at heights, climb ladders and stairways and work off of platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
Work Environment - Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools.
Required Tools
* Metal Tool Box with Lock
* Spud Crescent Wrench with Carrier
* Center Punch
* 12"x24" Framing Square
* 50' to 100' Tape
* 8" Side Cutters
* Sliding T-Bevel
* Hacksaw
* Set of Allen Wrenches
* 3" C-Clamps(3)
* Bolt Bag
* 6 lb. Hammer, Double Faced with carrier
* 6" x 12" Framing Square
* Spud Bar/Sleever Bar
* Bull Pin with Carrier
* 25' Tape
* Vice Grips (2)
* Chalk Box Line
* 8" C-Clamps (2)
* Torpedo Magnetic Level
* 16 oz. Plumb Bop
* Large Wedges (2)
* 12 lb. Beater
* Small Wedges (2): 1 7/16 & 1 5/16
* 1 - Rain Coat
* 1 - Rubber boots
ZACHRY is dedicated in providing a Safe and Drug Free work environment and is an Equal Opportunity Employer
This position will consist of but not limited to repair and/or demolition to boiler components.
Position Responsibilities:
* Repair or replace defective pressure vessel parts, such as safety valves or regulator.
* Demolition and Structural Fitting
* Attach rigging and signal crane or hoist operators to lift heavy frame and plate sections or other parts into place
* Study Blue prints to determine locations, relationships or dimensions of parts
* Follows direction from supervisor
* Other duties as assigned
* Minimum 4-5 years industrial Maintenance
* Must be familiar with industrial power and hand tools
Essential Skills, Knowledge, and Abilities:
* Proficient mechanical skills
* Knowledge of machines and tools, including their designs, uses, repair, and maintenance
* Able to communicate items of concern found during inspections and walk downs
* Knowledge of industrial machinery and equipment
* Organization and time management
* Must have good aptitude and manual dexterity
* Good reading comprehension
* Ability to work with others - team player
* Good communication skills with co-workers and supervisors
* Commitment to Zachry values and safety rules and regulations
* Must have experience using industrial hand tools and power tools
* Must have reliable transportation
* Knowledge of safety practices to operated equipment
Valued but not required skills, knowledge, and abilities:
* Former Zachry employee
* Training in vocational schools or related on the job experience.
Physical demands and work environment:
Physical Demands - Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. Give full attention to what other people are saying, taking time to understand directions. May be required to lift, carry and move objects safely. Will work at heights, climb ladders and stairways and work off of platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
Work Environment - Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools.
Required Tools
* Metal Tool Box with Lock
* Spud Crescent Wrench with Carrier
* Center Punch
* 12"x24" Framing Square
* 50' to 100' Tape
* 8" Side Cutters
* Sliding T-Bevel
* Hacksaw
* Set of Allen Wrenches
* 3" C-Clamps(3)
* Bolt Bag
* 6 lb. Hammer, Double Faced with carrier
* 6" x 12" Framing Square
* Spud Bar/Sleever Bar
* Bull Pin with Carrier
* 25' Tape
* Vice Grips (2)
* Chalk Box Line
* 8" C-Clamps (2)
* Torpedo Magnetic Level
* 16 oz. Plumb Bop
* Large Wedges (2)
* 12 lb. Beater
* Small Wedges (2): 1 7/16 & 1 5/16
* 1 - Rain Coat
* 1 - Rubber boots
ZACHRY is dedicated in providing a Safe and Drug Free work environment and is an Equal Opportunity Employer
Start connecting with qualified job seekers
Resources for employers posting boilermaker mechanic jobs
Average cost of hiring
Recruitment statistics
How to write a job description
Examples of work conditions
Boilermaker mechanic job description FAQs
Ready to start hiring?
Updated March 14, 2024
Updated March 14, 2024