Bore mill operator jobs near me

Directional Bore Operator/ Locator Summary/Objective This position performs tasks required for the operation of directional drill including set-up and bore path completion for the construction/upgrade of communications conduit, gas, water, sewer, etc. Essential Functions and Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Load and unload directional bore equipment in a manner that is secure and damage free Transport associated tools, materials and/or equipment in a safe manner Complete a daily inspection on bore equipment prior to commencing work Prepare the drill fluid based on site conditions prior to boring commencing In conjunction with bore crew, locate/operate the directional drill using the selected bore heads and back reamers to place cables Operate horizontal directional drill equipment in accordance with company and industry standards Responsible for locating cables and verification in accordance with blueprints Identifies utilities in the construction area and bore path Connect/stub-up conduit and wire Dig pits, trenches or potholes as required including windows when crossing utilities Restores and/or landscapes disturbed areas of the jobsite Accurately complete all required company documentation for each assignment according to established company standards and procedures (i. e. timesheet, vehicle log, expense report) Adhere to all established company safety policies and perform work in a safe manner. Perform other duties and tasks as assigned in order to help team complete a project Knowledge, Skills and Abilities Ability to read and interpret engineering/construction prints, plans and specifications Knowledge of utility depths and placements Possess general knowledge of construction practices Ability to work in various environments/settings with moderate to loud noise levels Ability to work in trenches, manholes and tunnels Must have attention to detail and be thorough in completing work tasks Ability to work efficiently, independently and collaboratively within a team environment Excellent interpersonal, communication and organizational skills Ability to move materials/equipment weighing up to 80 pounds Ability to manage multiple tasks with changing priorities to meet deadlines in a fast paced environment with constant interruptions Ability to work efficiently, independently and collaboratively within a team environment Able to work 10+ hours in a day when necessary Willing to work outside in varying weather conditions Travel Weekly travel is required for this position. Company will pay hotel expenses (shared room) and per diem Preferred Education and Experience One year of experience operating a directional borer preferably in the telecommunications field Previous rock boring experience Class A CDL Requirements Please note that only applications from individuals residing in the United States will be considered for this position. We appreciate your understanding and thank all applicants for their interest.

Job Description IronRoad is conducting a confidential search for a 2nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

Set up and operate CNC 5 axis Mill / Turn Machines. Operate the Machines to perform a series of operations such as turning, boring, threading, facing, grinding, drilling and tapering on round bars. Machining functions will include integrated gaging, redundant tooling with RFID chip reader and optical prestter. Works directly with offline programmers that utilize CAM software, simulation software and 3D Models generated in Solidworks to support machining and process development. Work from complex blueprints, engineering drawings, and specifications, job orders, tooling instructions and standard charts to obtain such specifications as dimensions, tolerances, and tooling instructions. Make required adjustments to machinery to compensate for material tooling, machine or program conditions. Troubleshoot and resolve various types of operating difficulties, recommend corrective action on process failures within the department. Be able to provide feedback to the programming department on programs and correct cutting tools to use to achieve required dimensions and finish tolerances; be able to measure using micrometers and other associated tools; be able to hold tight tolerances within .001”; be able to maintain proper and accurate records, including inspection reports. ESSENTIAL RESPONSIBILITIES Follows all environmental health and safety (EHS) policies, practices, protocols, and regulations. Proactively addresses any potential EHS issues and reports any unsafe conditions. Sets a positive example regarding EHS and a safety-first culture. Maintains a clean and orderly (6S) work area and equipment to ensure a safe and productive work environment and quality products. Set up and operate CNC Mill / Turn equipment Operate hand tools as needed in a safe and efficient manner May need to operate overhead crane, forklift, and/or hand trucks as necessary Choose correct tools to achieve desired product finish, based on material and other specifications Read and understand drawings, and be able to hold tolerances to .001” Be able to properly utilize measuring tools such as a tape measure, micrometer, vernier or caliper General Responsibilities: Performs other responsibilities as assigned and/or as needed to support company objectives. Meets on-site attendance requirements. Pursues continuous improvement by suggesting, implementing, and supporting solutions/strategies to increase productivity, reduce scrap, and improve the operation, and decrease downtime; participates in continuous improvement activities and projects, including root cause analysis and corrective action implementation. Requirements Work Experience 8 - 10 years experience running vertical and horizontal CNC mills / CNC lathes / CNC Mill/Turn Machines or 5 Axis machining (Mill / Turn Experience preferred) Experienced in cutting a variety of metals and welds preferred Education and Skills High School Diploma, GED, or equivalent Ability to read and edit CNC programs required Ability and experience in using G and M Code required Experienced in 4 Jaw chuck setup preferred Experience using integrated gaging routines and redundant tooling preferred Ability to calculate using fractions and decimals as well as identify radii required Ability to read, understand and interpret blueprints, schematics, etc. required Ability to properly use micrometers, verniers and calipers and tape measures to determine tolerances required Familiarity with cutting tools; their applications and uses; and other tools associated with Metal cutting equipment Familiarity with required hand tools; their applications and uses; and safe handling requirements Physical Requirements Position may require person to be on their feet to 8-10 hours standing or walking in a heavy manufacturing environment, constantly performing regularly scheduled maintenance duties Ability to lift objects weighing more than 50 pounds infrequently Ability to safely operate forklift, overhead cranes, and other material handling equipment Ability to see and hear in order to perform the functions of this position Ability to speak, write and understand English fluently\ Sitting - I, Standing - F, Walking - F, Lifting up to 50 lbs - I, Bending - F, Climbing - I, Fine Motor Skills - F Based on an 8-hour Day Infrequently (I) 1-5% Occasionally (O) 6-33% Frequently (F) 34-66% Constantly (C) 67-100% The above statements are intended to describe the general nature and level of work required by the position. They are not to be construed as an all-inclusive list of responsibilities, duties, and skills required. All employees holding this position may be required to perform responsibilities outside of those listed from time-to-time based on business circumstances.

The Mill Machinist has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on Multi-Axis Mill and Lathe machines, including loading and unloading of parts, part inspection, tool holder preparation and insert changing; cleans and performs preventive maintenance and minor adjustments of assigned equipment; prepares various logs and records to document machine operation and daily production; enters required data into computer; moves/transports parts to appropriate location as needed; handles parts in a manner to prevent damage; maintains safe, clean and orderly work areas; receives, reviews, and /or refers to various records or reports including travelers, shift reports, SOPs, safety sheets, etc.; prepares labor sheets and non-conformance forms; interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, engineering, and other shop personnel; operates height gage, micrometers, scooter gauges, various power tools, computers, etc.; performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Produce effectively and efficiently within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective action when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Function effectively within a team environment * Perform miscellaneous duties and projects as assigned and required * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability in the area of machining * Must have High School Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Must have an understanding of the machining process * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers, dial calipers, height gage, scooter gages, computers and indicators accurately * Must be able to calculate dimensions and tolerances using knowledge of mathematics * Must be able to follow verbal and written instructions in English * Must be able to clearly communicate information to others verbally and in writing in English * Perform any other task management deems necessary or needed by the company * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: 3 - 5 years' experience in Lathe machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. The employee must frequently lift/or move up to 35 pounds, occasionally up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required personal protective equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast-paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit resume noting job inquiry ID#605200325 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Job Description TUBE MILL ENTRY LEVEL PACKAGER - 2nd Shift Cleveland-Cliffs Tubular Components has an immediate opportunity for a Tube Mill Entry Level Operator at our Walbridge, Ohio Tubular Components location. This position is responsible for monitoring, maintaining, and operating the off loader and packaging section of the tube mill on 2nd shift. This role is responsible for ensuring the tubing is off loaded and packaged per the customer requirements. Summary of Responsibilities: Offload, hand stack, and package steel tubing manually. Assemble bundles correctly to protect product from damage. Monitor auto off loaders to ensure tubes are off loading correctly. Inspect finished goods and reject non-conforming product Visually inspect tubing for quality defects. Ability to use measuring devices to measure tubing. Repacking and banding - repack tubing into bundles, pack, and / or band bundles according to customer requirements. Technical skill set to perform changeovers and set up. Other duties as assigned. Requirements Minimum Qualifications: High School Diploma Prior automotive manufacturing experience preferred Must be able to lift up to 40 lbs Must be able to work overtime as needed to support customer requirements Ability to read and comprehend safety and position procedures Excellent attendance record Excellent safety record Pre-Employment hair drug screen required Preferred Qualifications: · Prior automotive manufacturing experience · Experience working in a production or manufacturing facility Applicants for this position must be currently legally authorized to work in the United States on a full-time basis. Benefits Company provide 401K with company matching Vacation Holiday Medical, Rx, and Dental Insurance Benefits - Effective Date of Hire Company Provided Life and AD&D Insurance Operational Performance Incentive Plan - Quarterly payout opportunities Employee Referral Incentive of $1,500 per successful referral Excellent growth and advancement opportunitiess Cleveland-Cliffs Inc. is the largest flat-rolled steel company and the largest iron ore pellet producer in North America. The Company is vertically integrated from mined raw materials, direct reduced iron, and ferrous scrap to primary steelmaking and downstream finishing, stamping, tooling, and tubing. We offer an excellent total compensation package including top pay with variable compensation opportunity, health insurance, retirement plan, paid time off and more! Cleveland-Cliffs Inc. is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability. you need a reasonable accommodation for any part of the employment process, please send an e-mail to *************************** or call **************** and let us know the nature of your request and your contact information. Do not email your application materials to this email address. Application materials sent to this email address will not be considered Cleveland-Cliffs Inc. is an equal opportunity employer - M/F/Veteran/Disability. We are a drug-free workplace and conduct pre-employment screening as a condition of employment

TempToFT Job Title: CNC Mill/Lathe Operator/Set-up Pay Rate: $20-24 PER HOUR BOE Hours: Monday through Thursday 6AM-430PM Occasional OT on Friday 6am-430pm Job Description: Job Summary: Set up & operate CNC Mill/Lathe to change, load/unload & produce parts Responsibilities: • Monitor & maintain equipment such as lubricant & cooling levels • Apply basic concepts of Alegra & Geometry • Avidly interpret Blueprints Physical Requirements: LIFTING: ENVIRONMENT: 1-20LBS STANDING, PUSHING PULLING Work Environment: o PACE OF ENVIRONMENT: MED o LEVEL OF SUPERVISION: HIGH o LEVEL OF INTERACTION WITH OTHERS: MED o ABILITY TO HANDLE MULTIPLE TASKS: MED o LEVEL OF EXPERIENCE REQUIRED: HIGH o TRAINING PROVIDED: LIMITED Location: Akron Dress Code: STEEL TOED SHOE/BOOTS CNC Mill & Lathe Operations. $20- $24 per hour BOE Essential Duties and Responsibilities include, but are not limited to, the following: • Operate programmed machinery to change, load/unload, and produce parts to specified design. • Monitor the feed and speed of machines during the machining process. • Inspect items as instructed and provide feedback to management to ensure any quality defects can be avoided in the future. • Inspect parts per blueprint as instructed. • Ability to apply concepts of basic algebra and geometry. • Monitor and maintain lubrication and coolant levels / points. • Clean up job site after work and return equipment and tools. • Supply own basic hand and measuring tools. Requirements / Competencies Expected: • Ability to read blueprints • Must demonstrate job responsibility consistency • Requires the ability to read and follow detailed written and/or verbal instructions • Demonstrate eagerness to learn different part/machine setups and operations. • Must demonstrate regular attendance 20.00 Qualifications High School Minimum 2 YEARS

Description: Summary : Responsible for running lathe machines. This involves tasks related to set-up, machine operation, and disposing of chips as required. Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape measure, and brooms. This list is not all inclusive. Job Functions and Functional Job Task Elements Task 1: Lathe Operation Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc. An overhead crane is used on these machines to set rolls and take out chip boxes. The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook. Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others. They weigh between 10-40#s and are handled on an infrequent basis per hour. Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands. When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour. Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position. Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms. Some lathes do not have hydraulics to move the rolls on the machine. The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc. This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools. To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month. Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool. There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task. Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour. Need to be able to push chips that are approximately 12 feet away. Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends. The parts are mounted sideways from the right and the left. On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side. Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour. Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application! Requirements: Shift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch. . Flooring: Cement, wooden platforms, grates, rubber mats. Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity. Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes. Strength Range: Medium-Heavy strength range.

Sets up and operates conventional, special purpose, and numerical control (NC) machines and machining centers to fabricate metallic and nonmetallic parts by performing the following duties. Has capability and flexibility to setup and operate CNC Lathes, Mills, and Wire EDM. Perks of being a Parker Team Member * Quarterly Bonus Program * Pension * $200 Perfect Attendance Bonus * 3 Weeks of Paid Time Off Your First Full Year * 13 Paid Holidays per Year * Environmentally Controlled 70° Work Environment 365 Days a Year * 401(k) Company Match of 100% on Your First 5% * Day One Medical, Dental, and Vision Insurance Options * On-Site Clinic * Gym Membership, Education, Safety Shoe, and Prescription Safety Glasses Reimbursement * Internal Advancement Opportunities * Recognition Programs Responsibilities * Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work-piece, sequence of operations, and setup requirements. * Measures, marks, and scribes dimensions and reference points on material or work-piece as guides for subsequent machining. * Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. * Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. * Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. * Verifies conformance of finished work-piece to specifications. * Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data. * Perform routine daily operator preventative maintenance. * Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems. * Must follow written standard work procedures including all safety and 5S procedures. Qualifications * Demonstrate proficiency and understanding of M & G code. * Ability to understand correlation of block fittings and block blanks. * Ability to understand inspection techniques or equipment, including comparator, square/45/etc. gauge. * Understand and apply cutter compensation adjustments. * Demonstrate thorough problem solving skills, be able to effectively communicate to escalate issues, and work independently to troubleshoot issues * Must have working understanding of the operation and setup of CNC machines. * Able to perform set-ups in order to minimize lost time. Closing Statement The essential functions have been provided as examples of the type of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions. The physical and mental demands described above are representative of those required to successfully perform the essential functions of this job. The job description is not intended to be an all-inclusive list of duties and responsibilities. It is intended to describe the general nature of the positions. Parker Hannifin Parker Hannifin is a Fortune 250 global leader in motion and control technologies and systems. For more than a century the company has been enabling engineering breakthroughs that lead to a better tomorrow. Learn more at ************** or @parkerhannifin. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) and Genetic Information Discrimination

Job type: Full time About Us: Founded in 2012 Faxon Firearms is a leading manufacturer of high-performance firearms and components, known for quality, innovation and service. We are passionate about craftsmanship and continuously improving our products to meet the needs of both professional shooters and enthusiasts. Our company values collaboration, growth, and excellence, offering a dynamic environment for employees to thrive. Join us in shaping the future of the firearms industry! General Description: The CNC Lathe operator is responsible for operating horizontal computer numerical control and/or manual machines to machine parts. The machine operator loads parts in the machine, cycle's machine, and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position runs production lots, communicates with co-workers regarding productions runs, and maintains a safe, organized and clean work environment. This position covers all CNC Lathe operators at Faxon Firearms. Reports to: Manufacturing Supervisor Responsibilities: Performs all assigned machine shop operations Detects and reports defective materials or questionable conditions to management or designee Follows tag system, quality procedures and completes all relevant in-process inspection forms Maintains the work area and equipment in a clean, orderly condition and follows prescribed Safety procedures Performs inspection of machined products, and documents results Completes and maintains paperwork for parts Understand all blueprint/operation drawing features before cutting chips Understands job quotas established in router or as instructed Ensure all gages used are calibrated and in good working order Use of overhead crane for loading and unloading parts into machine Perform general maintenance on machine such as changing coolant, oils and other lubricants Carry out all other duties as assigned Minimum Educational Qualifications: High school diploma or equivalent Minimum Previous Experience: 6 months experience in a similar position, interested in personal development in trade Mechanical aptitude Familiarity using micrometers and calipers Ability to read and understand blueprints Other Skills: Willing to learn to become proficient in operating applicable equipment Good attitude Quality and detail oriented G Code and M Code familiarity is a plus Specific vision abilities required by this job include close vision, distance vision, depth perception and the ability to adjust focus and distinguish color. Physical Effort: While performing the duties of this job the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, sit and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. The employee will regularly lift weights above 50 pounds from the ground and potentially above the shoulders.

Superior Forge & Steel Corporation is currently hiring a 3rd shift Milling Operator for our operation in Lima, Ohio. The Milling Operator is a member of our Machining Department responsible for operating a milling machine to mill our forged rolls to customer specifications. Competitive starting wage is $22.20 per hour, benefit/insurance package, 8 paid holidays, 401K, PTO, Vacation, Paid Relief Days, $1,000 SIGN ON BONUS, and this position is eligible for the Production Incentive Program. Responsibilities: Set up and operate mills and controller Milling rolls to customer blueprint specification Inspect milled dimension(s) to customer blueprint Reporting all deviations from customer blueprint specifications Perform other department duties, as assigned Physical Requirements & Environmental Conditions: Must be capable of lifting up to 50 lbs Exposed to seasonal temperature changes Manufacturing environment with noise, dust, and vibration Qualifications: High School Diploma or GED required Previous milling experience required Previous experience operating manufacturing equipment and/or heavy machinery required Strong math skills Strong attention to detail Ability to read and interpret blueprints Basic problem solving and troubleshooting skills Previous CNC machining experience preferred Must be able to work any shift Must be able to pass criminal background check and drug screen Classification: Hourly Benefits: Eligible upon hire: Company paid/reimbursed safety shoes and prescription safety glasses. Eligible after 30 days; medical/prescription drug coverage, dental, vision insurances, company provided Basic Life and AD&D insurance, additional voluntary benefits including hospital indemnity, accident and critical illness insurance, paid holidays. Eligible at 60 days (520 working hours): Participation in the production incentive pay program (potential to add $1-$2 per hour to base pay, based on production) Eligible after 90 days; paid relief days, PTO, employee referral program Eligible after 6 months; 401K program Superior Forge & Steel Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Equal Employment Opportunity Posters | U.S. Department of Labor (dol.gov) No calls or agencies please. Superior Forge & Steel Corporation will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Superior Forge & Steel Corporation is a manufacturer of forged hardened steel rolls for hot and cold rolling of ferrous and non-ferrous materials. We also provide other products and services such as commercial ingots, specialty forging, heat treatment, and machining. We're committed to working with and providing reasonable accommodation to individuals with disabilities. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to complete the application process, please contact us by email, ***************, or by phone, ************ ext. 241

As a Reversing Mill Operator at Steel Technologies, you will plan machines to mill steel, align parts and pieces for production equipment, set equipment controls, and monitors equipment. It's important for you to be detailed and consistent in order to ensure only the best result for our customers. We rely on this position to continuously meet quality and customers standards. How you'll contribute to our company: Make mill set-up including work roll changes to ensure compliance with production instructions Reconcile coil identity to production and load coil Set-up Automatic Gauge Control (AGC) system Thread coil through mill, cropping non-compliance material Assure material compliance with all order instructions Document all inspection data Monitor coil for shape, finish, gauge (using AGC) running at maximum line speed to assure with order compliance Check gauge and surface when coil is finished Band/secure coil and identify coil in compliance with production Attach histogram to production as required from AGC Remove finished coil from recoiler Organize complete production documentation at order end and record production information, ensure accuracy Remove scrap from machine Clean machine and entire area Here's what we can offer: Medical, Dental, and Vision after 60 days of employment Competitive Wellness Program, providing up to 100% discount on medical premiums Short-Term and Long-Term Disability Supplemental Accident Insurance through Allstate for additional coverage on accidents + cancer Employer-Paid Life Insurance 401(k) after 60 days of employment + competitive match after one year Paid Time Off starting after 90 days of employment Paid Holidays starting day one! Health Savings Account and Flexible Spending Account Great discount programs in automotive, technology, and more Boot and Glasses Allowance after 60 days of employment Free uniforms after 60 days of employment Monthly Incentive Bonus after one full month of employment Education Assistance is available for job related courses to further your education, with up to 100% paid tuition for maintenance-related coursework and certifications Career Advancement Opportunities Teammate Assistance Program (TAP) which offers professional assistance for Counseling, Financial, Legal, and Family services Here's what is needed to be successful: Ability to perform complete set-up and operational tasks of rolling to ensure compliance with customer specifications and production requirements Ability to use tape measures and micrometers Ability to comply with safety rules and requirements Ability to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds Steel Technologies is an equal opportunity employer and considers all qualified applicants without regard to any classification protected by federal, state and/or local law.

About Us: At Xccelerated Construction Unlimited (XCU), we're not just in the business of building pipelines-we're building a reputation for doing the job right. Our projects rely on precision, safety, and experienced operators who know how to get the work done efficiently and effectively. We're growing our team and looking for professionals who take pride in their craft and are ready to step up when it counts. Job Summary: We are currently hiring an experienced Bore Operator to lead and execute horizontal boring operations in the field. This role is critical to the success of our underground utility and pipeline installations. The ideal candidate will be highly skilled in bore rig operations, able to create pre-bore profiles, and comfortable leading a small field crew. When not boring, we expect this team member to assist with other activities on the ROW (right-of-way), reinforcing our all-hands-on-deck culture. Key Responsibilities: Operate horizontal directional drilling (HDD) equipment to complete bore operations per project specifications. Create and submit accurate pre-bore profiles and bore logs. Hire and manage a qualified line locator/helper to support bore activities. Conduct job site evaluations and work with supervisors to plan safe and efficient bore paths. Maintain, inspect, and troubleshoot bore equipment to ensure safe operation. Work with inspectors and project managers to ensure alignment with utility locate information and bore plans. Perform general ROW duties when not actively boring (e.g., hand digging, spotting, cleanup, assisting crews). Follow all safety procedures and contribute to a safety-first job site culture. Ensure proper documentation and communication of bore completion and daily activities. Qualifications: Experience: 3+ years operating bore machines in pipeline, utility, or civil construction environments. Skills: Must be able to read and interpret bore plans, utility locates, and site drawings. Proficient in creating and using pre-bore profiles. Leadership: Ability to hire, lead, and manage a helper or line locator in the field. Certifications: CDL preferred but not required. OSHA 10/30 or relevant safety credentials a plus. Work Ethic: Team-oriented and willing to contribute outside of primary role when needed. Physical Requirements: Ability to lift up to 80 lbs, work in rugged outdoor conditions, and safely operate equipment near utilities and active construction. What We Offer: Competitive hourly pay with overtime potential. Daily per diem for travel or remote job sites. (When Applicable.) Company Vehicle (When Applicable.) A results-driven and team-oriented environment. Opportunity to grow into leadership or equipment-specific roles. Support from a safety-first operations team that values boots-on-the-ground experience. Why Join XCU? At XCU, we value the operators who make things happen underground. Whether you're behind the controls of a bore machine or jumping in to lend a hand on the ROW, you're part of a team that gets the job done right-and takes pride in doing it together. If you're ready to bring your expertise to a company that sees your value, we're ready to talk.

Full-time Description Our Company's Mission is Steel Tube Solutions. Our Purpose is Making our Employees' and Customers' Lives Better. We would like to invite you to join a team where we believe that sound Safety practices and a dedication to Quality solutions will lead to successful Production. We are looking for skilled machine operators who are willing to grow with us to join our team! Requirements Responsible for all operations related to the production of steel tubes on a tube mill. Responsible for the quality and leadership of other mill employees. Must work self-directed to keep equipment operating at its optimal level. Expected to maintain compliance with all company policies, procedures and OSHA guidelines. Must, without supervision and according to standards, assemble all dimensions, make tube mill adjustments, perform troubleshooting. lead tooling changeovers and know all other operations related to the tube mill. Responsible for product quality and ensure that products being produced are compliant to ASTM Standards and customer specifications. Highschool Diploma or GED required. One (1) year experience as a tube mill operator required. Salary Description $20-25 per hour

Job DescriptionCrucial LinkManual Mill Operator1st & 2nd Shift Needed$16-24/hr The Manual Mill Operator will observe milling and plaining machine operation and adjust controls to ensureconformance with specified tolerances. This position reports directly to the designated shift supervisor. Job Duties• Position and secure workpieces on machines, using holding devices, measuring instruments, hand toolsand hoists.• Remove workpieces from machines, and check to ensure that they conform to specifications, usingmeasuring instruments such as microscopes, gauges, calipers, and micrometers.• Verify alignment of workpieces on machines, using measuring instruments such as r ules, gauges, orcalipers.• Move cutters or material manually or by turning handwheels or engage automatic feeding mechanisms tomill workpieces to specifications.• Watching gauges, dials, or other indicators to make sure a machine is working properly.• Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvementsor take corrective action.• Controlling operations of equipment or systems.• Align parts or workpieces to ensure proper assembly.• Monitor equipment operation to ensure that products are not flawed.• Verify conformance of machined work to specifications, using measuring instruments, such as calipers,micrometers, or fixed or telescoping gauges.• Study machining instructions, job orders, or blueprints to determine dimensional or finish specifications,sequences of operations, setups, or tooling requirements.• Change worn cutting tools, using wrenches.• Select and set cutting speeds, feed rates, depths of cuts, and cutting tools, according to machininginstructions or knowledge of metal properties.• Install tools in spindles. Requirements• Experience using hand tools• Ability to follow oral and written work orders• Active listening skills• Strong written and verbal communication skills• Desire to be proactive while creating a positive work environment• Ability to multi task effectively and prioritize as needed• Ability to adapt to changes adequately• Strong organizational skills• Attention to detail• Critical Thinking Skills• High school diploma or equivalent Physical Requirements:o The ability to respond quickly to sounds.o The ability to see and respond to dangerous situation.o The ability to wear personal protective gear correctly.o The ability to stand continuously throughout the duration of the shift.o The ability to lift 70 lbso The ability to withstand working in varying temperatures. #talroo #zr

Job Details Undisclosed Cleveland Gear Co - Cleveland, OH Undisclosed N/A Full Time Undisclosed $25.00 - $35.00 Hourly Undisclosed Undisclosed Manufacturing CLEVELAND GEAR COMPANY Join a Legacy of Innovation and Precision! Are you the type who never settles for “good enough”? Do you constantly look for smarter, more efficient ways to get the job done? At Cleveland Gear Company, a trusted leader in high-quality worm gearing, industrial speed reducers, and custom gear drives, we're searching for a 3rd Shift Milling Machinist who thrives on solving problems and driving results. We want self-starters-individuals who are energetic, innovative, and ready to take ownership of meaningful work in a well-established, profitable, and growing organization. What's in it for you? Comprehensive benefits package 401(k) with company match Family-oriented culture Genuine opportunities for professional growth and advancement Here's how you'll make an impact: POSITION SUMMARY: The individual in this position will be charged with setup and operation responsibilities in a Horizontal Machining Center. Completing tasks based on customer demands, production requirements and quality with respect to Cleveland Gear policy and procedure Successful candidates are expected to maintain a performance level in accordance with work center productivity and quality goals. Qualifications PREFERRED QUALIFICATIONS: Two (2) years experience in setting-up and operating precision machinery including Computer Numerical Control (CNC) Aptitude in applied mathematics and blueprint interpretation Experience process inspection and measurement systems MINIMUM QUALIFICATIONS: 1 year experience in the set-up and operation in setting-up and operating precision machinery including Computer Numerical Controls (CNC) Basic understanding of mathematical concepts and blueprint interpretation. High School Diploma.

2nd shift 2pm-10pm $3.00 2nd shift premium BUSINESS UNIT: Crane Pumps & Systems DEPARTMENT: Operations SEGMENT: Process Flow Technologies REPORTS TO: Machine Shop Supervisor BASIC FUNCTION: Sets up and operates conventional machine tools such as lathes, milling machines, and grinders to machine metallic and nonmetallic work pieces in a low volume/high mix environment. Sets up and operates either CNC lathes or CNC milling centers to machine metallic and nonmetallic work pieces. RESPONSIBILITIES AND DUTIES: * Reads blueprint or job order for product specifications such as dimensions and tolerances, tooling instructions such as fixtures, feed rates, cutting speeds, depth of cut and determines sequence of operations * Selects, positions and secures tool in tool holder (chuck, collet, or tool post). * Positions and secures work piece in holding device, machine table, chuck, centers, or fixtures. * Moves controls to position tool and work piece in relation to each other and to set specified feeds, speeds and depth of cut. * Edits and updates CNC programs by working with programmers and engineering for continuous improvement. * Sets up fixture and jaws. Establish start up dimensions for machine multiple times a day. * Observes operation of machine. * Verifies quality of machined work piece to specifications using a variety of different calibrated gauges. * Operates bench tools to de-burr parts. * Other duties as assigned. QUALIFICATIONS AND SKILLS: * Six months to one-year related experience and/or training; or equivalent combination of education and experience. * Associate's degree or equivalent from two-year college or technical school (preferred). * Must be able to lift up to 30 pounds. WHAT WE OFFER: Competitive medical, dental, and vision benefits, tuition reimbursement program 401(k) match Paid time off including vacation, personal holidays & paid holidays Opportunity for advancement Competitive starting pay Crane Pumps & Systems will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas (Examples: E, F-1 with OPT or CPT, H-1, H-2, L-1, B, J or TN), or those who need sponsorship for work authorization now or in the future, are not eligible for hire at this time. $24-26 This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

We are seeking a Machinist to operate Manual Mills and Lathes. Work hours are Monday through Friday from 7 a.m. to 3:30 p.m.

Job Title: Machinist / Mechanical Assembler Shift: Monday-Friday, 7:00 AM - 3:30 PM Type: Contract-to-Hire Pay & Benefits Starting pay: $25-$29/hour, depending on experience Contract-to-hire with permanent hire opportunity after evaluation period Annual performance-based pay increases Medical (75/25 cost split), dental and vision (50/50), life insurance ($50k policy) 401(k) plan (no match yet) Paid holidays Vacation: 2 weeks after 1 year, 3 weeks after 5 years Clean and organized work environment Smaller company culture with strong team dynamics Long-term career opportunity-many employees have 10+ years of tenure Hours & Location Schedule: Monday through Friday, 7:00 AM to 3:30 PM Location: Cleveland, OH - Richmond Rd area Free parking on site Job Responsibilities This is a hands-on, mechanically-inclined role for someone who enjoys working on equipment and machinery in a clean, well-organized environment. As a Machinist / Mechanical Assembler, you will: Assemble small to medium components of vibration testing systems Align, position, and fit components using hand and power tools (pliers, wrenches, screwdrivers, drills, etc.) Perform basic wiring of cables and connectors Read and interpret blueprints and schematics Adjust parts for proper fit and functionality Perform basic machining: operate drill presses, mills, and lathes Work to tight tolerances, selecting correct feeds and speeds Safely operate tow motors, lift trucks, and pallet jacks for moving materials Lift up to 60 lbs when needed This role combines mechanical assembly, light machining, and equipment operation-ideal for those with a passion for hands-on mechanical work. Required Qualifications Strong mechanical aptitude-especially from backgrounds like automotive, HVAC, or industrial assembly Ability to read and work from technical schematics Excellent attention to detail and willingness to learn Strong attendance and ability to eventually work independently Solid work history and reliability Must be fluent in English Able to follow safety and shop procedures Steel toe boots required ?Why You'll Want This Job This is a high-growth, high-demand company with a stable workload and excellent long-term potential. They manufacture custom-built vibration testing machines used across the automotive and aerospace industries. If you enjoy mechanical work and want to grow with a company that invests in its employees, this is a fantastic opportunity. You'll be trained by experienced professionals, and have access to long-term advancement in a specialized, niche industry. #TalrooIndependence

Job Description Directional Bore Operator/ Locator Summary/Objective This position performs tasks required for the operation of directional drill including set-up and bore path completion for the construction/upgrade of communications conduit, gas, water, sewer, etc. Essential Functions and Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Load and unload directional bore equipment in a manner that is secure and damage free Transport associated tools, materials and/or equipment in a safe manner Complete a daily inspection on bore equipment prior to commencing work Prepare the drill fluid based on site conditions prior to boring commencing In conjunction with bore crew, locate/operate the directional drill using the selected bore heads and back reamers to place cables Operate horizontal directional drill equipment in accordance with company and industry standards Responsible for locating cables and verification in accordance with blueprints Identifies utilities in the construction area and bore path Connect/stub-up conduit and wire Dig pits, trenches or potholes as required including windows when crossing utilities Restores and/or landscapes disturbed areas of the jobsite Accurately complete all required company documentation for each assignment according to established company standards and procedures (i.e. timesheet, vehicle log, expense report) Adhere to all established company safety policies and perform work in a safe manner. Perform other duties and tasks as assigned in order to help team complete a project Knowledge, Skills and Abilities Ability to read and interpret engineering/construction prints, plans and specifications Knowledge of utility depths and placements Possess general knowledge of construction practices Ability to work in various environments/settings with moderate to loud noise levels Ability to work in trenches, manholes and tunnels Must have attention to detail and be thorough in completing work tasks Ability to work efficiently, independently and collaboratively within a team environment Excellent interpersonal, communication and organizational skills Ability to move materials/equipment weighing up to 80 pounds Ability to manage multiple tasks with changing priorities to meet deadlines in a fast paced environment with constant interruptions Ability to work efficiently, independently and collaboratively within a team environment Able to work 10+ hours in a day when necessary Willing to work outside in varying weather conditions Travel Weekly travel is required for this position. Company will pay hotel expenses (shared room) and per diem Preferred Education and Experience One year of experience operating a directional borer preferably in the telecommunications field Previous rock boring experience Class A CDL RequirementsPlease note that only applications from individuals residing in the United States will be considered for this position. We appreciate your understanding and thank all applicants for their interest.