Quality Technician jobs at BorgWarner - 239 jobs

Job TitleProduct Quality Inspection TechnicianJob DescriptionProduct Quality Inspection Technician (1st Shift) The In-Process Quality Inspection Technician for our Magnetic Resonance Imaging business is responsible for performing a variety of quality inspection and documentation tasks during the manufacturing process to help reduce defects and increase product quality consistency. Your role: Measure parts and tools accurately using appropriate tools and guidelines during the manufacturing process. Conduct quality inspections in SAP to maintain timely and precise inventory tracking. Ensure equipment is calibrated and maintained, addressing any issues promptly. Document and organize inspection results clearly, adhering to Good Documentation Practices. Collaborate with teams and participate in audits, while reporting quality issues and suggesting improvements. You're the right fit if: You've acquired 2+ years of experience in quality inspection (preferred) in a manufacturing facility, preferably in a regulated environment (e.g. automotive, aerospace, medical device). Experience with simple measurement and calibration tools required (micrometers, calipers, etc.). Experience with simple measurements, and document measurements required. Experience with inspections and audits in some capacity is required with training available as needed (Welding inspections, pressure testing, hydro testing, HIPOT testing, etc.). Experience inspecting with Coordinate Measuring Machine's (CMM) preferred but not required. Experience with SAP, Windchill, and MS Office preferred. An ideal candidate will have quality inspection experience or hands on mechanical aptitude skills and be trainable where needed. Your skills include ability to read and interpret engineering drawings and proficiency with Geometric Dimensioning & Tolerancing (GD&T). You are knowledgeable about metrology, materials, calibration, auditing and inspection techniques with demonstrated ability to utilize relevant hand tools for these purposes (micrometers, calipers, and other simple hand tools). You have a High School Diploma, Vocational Education, or equivalent required, Associate's degree or higher preferred. You must be able to successfully perform the following minimum Physical, Cognitive and Environmental job requirements with or without accommodation for this position. You're an excellent communicator with an ability to work well cross functionally, and comfortability leading without expressed authority. You have strong organizational skills and an ability to prioritize in an environment with rapidly changing priorities. How we work together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the company's facilities. Field roles are most effectively done outside of the company's main facilities, generally at the customers' or suppliers' locations. This is an onsite role on 1st shift role (7:20am-3:30pm) Mon-Fri. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help improve the lives of others. Learn more about our business. Discover our rich and exciting history. Learn more about our purpose. Learn more about our culture. Philips Transparency Details The pay range for this position in Menands, NY is $21.27/hr. to $34.04/hr. The actual base pay offered may vary within the posted ranges depending on multiple factors including job-related knowledge/skills, experience, business needs, geographical location, and internal equity. In addition, other compensation, such as an annual incentive bonus, sales commission or long-term incentives may be offered. Employees are eligible to participate in our comprehensive Philips Total Rewards benefits program, which includes a generous PTO, 401k (up to 7% match), HSA (with company contribution), stock purchase plan, education reimbursement and much more. Details about our benefits can be found here. At Philips, it is not typical for an individual to be hired at or near the top end of the range for their role and compensation decisions are dependent upon the facts and circumstances of each case. Additional Information US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa, now or in the future. Company relocation benefits will not be provided for this position. For this position, you must reside in or within commuting distance to Latham, NY. This requisition is expected to stay active for 45 days but may close earlier if a successful candidate is selected or business necessity dictates. Interested candidates are encouraged to apply as soon as possible to ensure consideration. Philips is an Equal Employment and Opportunity Employer including Disability/Vets and maintains a drug-free workplace.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary The qualifying candidate must possess the drive to achieve superior customer satisfaction. They must be goal-oriented, enthusiastic, energetic, self-motivated, with the ability to interact and communicate with all levels of the organization to be effectively successful. The opening is located at our Normal, IL facility and reports directly to the Supervisor in FAME. Responsibilities Operate air, power, and hand tools such as air chisels, prybars, bandsaw, sawzall and angle grinders to destructively test or cut out samples of various types of joining technologies Effectively use hand measuring tools such as calipers, micrometers, and tape measures Complete visual inspections and or destructive testing of components, welds and other joining technologies Use joining inspection sheets to identify weld ID's and other specific critical joints Accurately document and report data in Excel and report results using Jira Standing and working in awkward positions such as but not limited to kneeling, bending, laying and crouched work may be required for extended periods of time to complete inspections and cutting operations Team lifting and moving of large sub-assemblies well over 100 lbs to move them into cutting positions Ability to push pull loads on wheeled dolly over 100 lbs Ability to lift 50 lbs individually Support manufacturing team equipment and process capability analysis Execute product and process validation / inspection plans Assist in performing and teaching all processes and assignments within the department, with the ability to fill in as needed Identify and contain suspect defective material Perform metal cutting and polishing to create measurable lab samples of welded joints Responsible to participate in quality related continuous improvement (Kaizen) projects Develop, maintain, and improve the quality culture within responsible area May perform other duties as assigned Qualifications Welding, fabrication, metal working, or weld inspection experience required Laboratory equipment experience 3+ years of high-volume manufacturing or quality experience (or) An equivalent combination of education, training, and experience Problem solving experience Computer skills: Microsoft Excel, PowerPoint, email - ability to manage files and records effectively Statistical process control / control charts Destructive or non-destructive inspection or testing experience Kaizen / continuous improvement process experience Good oral and written communication skills Geometric dimensioning and tolerancing (GD&T) Ability to stand for 8-12 hours per day. Required to walk; climb or balance; and stoop, kneel, crouch, or crawl. Ability to lift and carry at least 50 pounds. Ability to perform all duties in a working environment that may contain dust, high noise levels, hot and cold weather. Pay Disclosure Hourly Rate for Illinois Based Applicants: $26.00 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Welding, fabrication, metal working, or weld inspection experience required Laboratory equipment experience 3+ years of high-volume manufacturing or quality experience (or) An equivalent combination of education, training, and experience Problem solving experience Computer skills: Microsoft Excel, PowerPoint, email - ability to manage files and records effectively Statistical process control / control charts Destructive or non-destructive inspection or testing experience Kaizen / continuous improvement process experience Good oral and written communication skills Geometric dimensioning and tolerancing (GD&T) Ability to stand for 8-12 hours per day. Required to walk; climb or balance; and stoop, kneel, crouch, or crawl. Ability to lift and carry at least 50 pounds. Ability to perform all duties in a working environment that may contain dust, high noise levels, hot and cold weather. Operate air, power, and hand tools such as air chisels, prybars, bandsaw, sawzall and angle grinders to destructively test or cut out samples of various types of joining technologies Effectively use hand measuring tools such as calipers, micrometers, and tape measures Complete visual inspections and or destructive testing of components, welds and other joining technologies Use joining inspection sheets to identify weld ID's and other specific critical joints Accurately document and report data in Excel and report results using Jira Standing and working in awkward positions such as but not limited to kneeling, bending, laying and crouched work may be required for extended periods of time to complete inspections and cutting operations Team lifting and moving of large sub-assemblies well over 100 lbs to move them into cutting positions Ability to push pull loads on wheeled dolly over 100 lbs Ability to lift 50 lbs individually Support manufacturing team equipment and process capability analysis Execute product and process validation / inspection plans Assist in performing and teaching all processes and assignments within the department, with the ability to fill in as needed Identify and contain suspect defective material Perform metal cutting and polishing to create measurable lab samples of welded joints Responsible to participate in quality related continuous improvement (Kaizen) projects Develop, maintain, and improve the quality culture within responsible area May perform other duties as assigned

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Quality Technician Summary The Quality Technician is responsible for helping to maintain quality standards of produced parts while adhering to the company policies and procedures. Job Description * Regular part inspections on the floor and in the laboratories * Utilizing various gages and measurement techniques to verify dimensions of production parts * Operate computerized gauging in quality labs * Inspection and disposition of gages * Complete weekly LPAs * NCM inventory and organization * Meet time and schedule standards assigned for work * Identify and record any problems relating to product, process, and quality system * Provide input on improving operation efficiencies * Maintains safe operations by adhering to safety procedures and regulations * Operate machines in accordance with process sheets and any other required paperwork (i.e. drawings, specifications, etc.) * All other duties as assigned Required Skills and Education * Blueprint Reading * Basic GD&T Knowledge * Strong Communication Skills * Root Cause Analysis * Gage R&R * Gaging Methods, Application, Evaluation and Calibration * Leadership Qualities * CMM Knowledge About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Job Posting Title Quality Tech The successful Coordinate Measuring Machine (CMM) Programmer is one that is conscientious, detail orientated, and a self-starter able to work from a verbal or written instruction. They are committed to quality, precision, and timeliness in their deliverables. These deliverables are achieved while maintaining a safe and organized working environment. Job Description: * Final and in process inspection of tooling, components, and prototype parts using CMM and various gauges as required * Ability to program and operate Zeiss CMM using Calypso software * Ability to read blueprints and understand product specifications and requirements * Ability to perform measurements of precision components to ensure specifications are met * Ability to perform general shop math * Ability to measure close tolerances * Completion of customer inspection reports per instructions and requirements * Performs preventive maintenance tasks as required Required Skills and Education High School diploma About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Discover how we're Bringing the Future Faster at AAM.com. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Department: Quality Technician Pay Grade: Salaried Non-Exempt Pay Rate: $25.00-$29.00 Reports to: Quality Manager Quality Technician needs to read and understand all customer standardized test method documents. Perform physical property testing within corporate polyurethane quality lab according to the customer standardized documents. Maintain, control, and ensure accuracy of test data. Monitor and ensure testing is performed within Temperature and Humidity control. Update testing matrix daily to note completed testing. Maintain 5S and housekeeping in the lab area daily. Maintain sample and test fixture inventories. Follow all lab safety practices. Participate in ISO 16949 system improvement activities, including but not limited to audits and Proficiency Testing. Participate in Gage R & R studies on lab equipment. Participate in equipment verification. Participate in Quality Planning meetings when required. Be a self starter; to complete all work orders in a timely manner. Abide by all EH&S requirements. Comply with company and departmental rules, policies and practices. Communicate with team members and supervision on all issues, concerns, updates, etc. Perform all roles & responsibilities as defined by the BOS policies & procedures. Perform other duties deemed necessary by the Quality Engineer/Manager or UTC Manager Quality Technician Required Experience Minimum 1 Year of Quality in Manufacturing. Automotive Preferred Strong Formal Problem Solving - 5 whys, 8D Strong Auditing Skills Strong Microsoft Applications: (Word, PowerPoint, Excel) Benefits: Medical, Dental & Vision insurance Disability Life and AD&D Insurance 401k Tuition Reimbursement Paid vacation Paid holidays The job description outlined above is not intended to be a detailed list of job functions or responsibilities. It outlines the essential functions of the job. An individual may be required to perform other duties from time to time. The company reserves the right to amend, change or delete the contents of this description. PRIMARY LOCATION Normal

Department: Quality Technician Pay Grade: Salaried Non-Exempt Pay Rate: $25.00-$29.00 Reports to: Quality Manager Quality Technician needs to read and understand all customer standardized test method documents. Perform physical property testing within corporate polyurethane quality lab according to the customer standardized documents. Maintain, control, and ensure accuracy of test data. Monitor and ensure testing is performed within Temperature and Humidity control. Update testing matrix daily to note completed testing. Maintain 5S and housekeeping in the lab area daily. Maintain sample and test fixture inventories. Follow all lab safety practices. Participate in ISO 16949 system improvement activities, including but not limited to audits and Proficiency Testing. Participate in Gage R & R studies on lab equipment. Participate in equipment verification. Participate in Quality Planning meetings when required. Be a self starter; to complete all work orders in a timely manner. Abide by all EH&S requirements. Comply with company and departmental rules, policies and practices. Communicate with team members and supervision on all issues, concerns, updates, etc. Perform all roles & responsibilities as defined by the BOS policies & procedures. Perform other duties deemed necessary by the Quality Engineer/Manager or UTC Manager Quality Technician Required Experience Minimum 1 Year of Quality in Manufacturing. Automotive Preferred Strong Formal Problem Solving - 5 whys, 8D Strong Auditing Skills Strong Microsoft Applications: (Word, PowerPoint, Excel) Benefits: Medical, Dental & Vision insurance Disability Life and AD&D Insurance 401k Tuition Reimbursement Paid vacation Paid holidays The job description outlined above is not intended to be a detailed list of job functions or responsibilities. It outlines the essential functions of the job. An individual may be required to perform other duties from time to time. The company reserves the right to amend, change or delete the contents of this description. PRIMARY LOCATION Normal

Job DescriptionSalary: Starting $19 per hour Role: Responsible for monitoring the overall quality process in the label production with decisions on a suspect or non-conform product (raw material, semi-finished goods, finished goods) to ensure quality standards are reached, and customer satisfaction is achieved. As a part of this role, you will support the internal audit process by executing product/procedural audits. Assisting the corrective actions process by participating in the root cause analysis as the elaboration and implementation of disciplinary actions. Support the conformity management process by collecting and entering data and, treating customer and supplier complaints and assisting the measuring instruments process by maintaining proper instrument calibrations . Required Skills/Abilities: Good communication skills (written and verbal) Ability to work physically (Standing, lifting, sorting) Familiar with the Microsoft Office suite and able to maneuver with web-based software Good Audit & Investigation skills English Language Detail Orientated Integrity Adaptable/flexible Analytical Spanish good to have but not required Education and Experience: High school diploma or equivalent- Required Experience in label production- Preferred 2+ years of manufacturing experience- an asset Prior QA experience - Preferred Responsibilities: Be available to respond to the production floor's quality demands. Making quality decisions for the proper treatment of a non-conform product. Sort finished or semi-finished goods or supply the information/samples required for production to sort Verify the conformity of raw material/cutting tools at their reception. Execute required audits. Complete the COAs for customers. Assist QC Supervisor in quantifying production non-conformances in the non-conformance report. Support QC Supervisor on customer emails. (Complaints, documentation requests, etc.) Support QC Supervisor on customer relations. (attending to calls, documentation requests, and complaint follow-ups, etc.) Conduct investigations of customer complaints. Data management: Entering customer complaints & corrective actions in our software (X3 Web system). Input/Track all supplier complaints in our software (X3 Web system). Support the Quality Control Supervisor to elaborate corrective actions by working directly on the cause. Support the QC Supervisor in the implementation and verification of corrective actions. Assist with supplier complaints investigations. Work with our QC Supervisor to prepare customer and supplier claims/complaints. Assist Process Manager 10 with the management of measuring instruments and calibration guides. Assist the technical department with quality assurance testing. Assist the QC Supervisor with the maintenance of the documentation system (Elaborating, modifying, applying, and removing documents) Participate in any additional improvement projects defined by the immediate supervisor or IML Labels. IML Labels Chicago Inc. is an equal-opportunity employer. We do not discriminate based on race, color, ethnicity, ancestry, national origin, religion, sex, gender, gender identity, gender expression, sexual orientation, age, disability, veteran status, genetic information, marital status, or any legally protected status. Women, minorities, individuals with disabilities, and protected veterans are encouraged to apply.

The story of Peterson Spring begins in the 1880's with the immigration of a young Norwegian blacksmith to America. August Christian Peterson studied blacksmithing in the early 1900's - the trade of choice for early spring makers. He managed various plants in the Midwest before founding his own company in 1914. August moved his family to Detroit. There, he launched his vision to meet a lion's share of the demand for springs within the railroad and automobile industry. After 8th grade, Alfred (the eldest son of August Peterson) left school to work with his father in the steel mills. As a team, August and his children generated enough income to launch and expand the family business. THE OPPORTUNITY Today, Peterson American Corporation continues to be an industry leader that rewards hard work, integrity, and operational excellence. Thirteen facilities world-wide - including the U.S., U.K., Canada, and Mexico - offer a unique global opportunity for new talent in Metallurgy, Engineering, Quality Control, and Production. Discipline is a requirement to join this team. Every position is highly visible and each team member adds value with every decision. We challenge you to pull from the strength of your personal story in order to create solutions in the highly technological art of spring making. Job Description SUMMARY Perform inspections, checks, tests, and sampling procedures of incoming materials, parts and components used in manufacturing and assemblies. Documents inspections and compiles reports as necessary. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Perform inspections of purchased parts, subassemblies or finished company products according to defined criteria using standard physical, mechanical and/ or optical equipment for measurements. Conduct and document process and system audits using written procedures. Document the results of the inspections and testing. Maintain all controlled document files and test records in a timely and accurate manner. Coordinate calibration of test equipment and fixtures Assist in the writing and updating inspection procedures, protocol and checklists. Evaluate problems and make initial recommendations for possible corrective actions. ions. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent and draw and interpret bar graphs. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Additional Information All your information will be kept confidential according to EEO guidelines.

The Quality Technician is responsible to perform quality audits of the process and material and assist in the analysis and problem solving of quality issues, The Technician acts as a member of production supervision to ensure proper processing of seats, support production schedules and elevation of production concerns as required as well as any deviation to process or policy. Specific Duties: Product and Process Audits Develop a thorough understanding of the Quality Assurance Systems and procedures (Quality Procedures Manual, product line requirement, customer quality manuals, supplier quality system standards, etc.). Perform and document such inspection results as designated by the overall quality plan. Responsible for testing auditing production process (e.g. work instructions, quality alerts, error-proofing, containment verification and control plans) using tools such as red rabbits and poka yoke verification to insure employees and equipment are in compliance with production intent and to ensure employees comply with all company rules/policies/practices relative to quality and delivery. Responsible for conducting product audits (H-point, dock audit, etc.) including appearance, objective measurement, and attribute tests as required with related test equipment set-up and data acquisition. Provide leadership in adherence to and promotion of 5S activities including conducting and reporting 5S audits and leading by example by adhering to facility, safety, and 5S policies particularly with regard to areas related to quality and quality processes. Perform incoming inspection functions on purchased production intent materials. Responsible for evaluating, recording and removing non-conforming material from the line into a controlled area. Production Support Perform production team member duties and attend necessary problem resolution meetings (e.g. white board meeting) as required to support production schedules. Perform Quality Assurance inspection, instrument/ gage calibrations and perform calibration and repair of small tools as needed in support of the overall gage control program. Coordinate containment and establishment of “clean points” as required. Quality Data Gathering, Reporting and Issue Resolution Gather data for periodic reports. Record, assist in the data maintenance and, report-out of the quality visual management boards (bulletin boards, charts, etc.) Disposition, test and provide investigation report-out for non-conforming material being returned from the customer plant and ensure that quality lab is clean and that all tools and equipment are accounted for and in good working order. Develop a practical understanding of Statistical Process Control (SPC) techniques and serve as facilitator in assuring proper use of these techniques throughout manufacturing. Assist BWI staff in technical problem solving activities; analyzing and providing timely resolution of material and/or internal process problems including coordination of cross-functional, multi-tiered investigation teams and interface with the supplier, when appropriate, to ensure immediate containment and continued long-term quality improvement. Qualifications Preferred: 2+ years of experience working with Automotive Quality Experience with QAD system is a plus Must be open to C Crew: Fri and Sat 6 am - 4:30 pm; Sun and Mon 6 pm- 4:30am PRIMARY LOCATION Bridgewater Interiors II

Join the CollisionRight Team as a Detailer / Quality Support Technician! WHY JOIN US COLLISIONRIGHT At CollisionRight, we believe in more than just repairing vehicles we re restoring confidence, pride, and performance for every customer we serve. When you join our team, you become part of a family-driven culture that values expertise, integrity, and care. We celebrate wins, reward hard work, and invest in you . Whether you re growing your career in the collision repair industry or looking for a supportive environment where your contributions truly matter, CollisionRight is a place you can thrive. What You Can Expect Competitive pay & bonus opportunities Paid holidays, floating holidays & PTO Comprehensive medical, dental & vision insurance Company-paid life insurance Supplemental life & disability coverage 401(k) with company match Paid parental leave Paid training & ongoing development opportunities A supportive, team-oriented environment built on respect, collaboration & care POSITION SUMMARY The Detailer / Quality Support Technician plays a critical role in delivering an exceptional final product to our customers. This position is responsible for performing thorough vehicle detailing and quality inspections prior to customer delivery, ensuring all repairs meet CollisionRight s high standards. This role also supports shop operations by assisting with facility maintenance, organization, and cleanliness, helping create a safe, efficient, and professional work environment. ESSENTIAL FUNCTIONS & RESPONSIBILITIES Perform detailed cleaning and final detailing of vehicles prior to customer delivery Conduct visual inspections of repaired areas and promptly report any concerns or defects to the General Manager or assigned technician Support general shop and grounds maintenance to ensure a clean, organized facility Inspect goods and completed work according to quality and safety standards Assist with ensuring test equipment is calibrated and functioning properly Follow all safety procedures, use required PPE, and comply with hazardous waste disposal guidelines Participate in monthly safety meetings Maintain organization and proper function of tools and equipment in the detail department Identify opportunities for improvement in quality control processes Perform daily cleaning duties including sweeping, mopping, dusting, trash removal, and restroom upkeep Make minor repairs as needed (e.g., changing light bulbs) QUALIFICATIONS High School Diploma or equivalent Valid Driver s License with a good driving record Prior automotive industry experience preferred but not required Strong attention to detail with excellent verbal communication skills Mechanical aptitude a plus Ability to work independently in a fast-paced environment Flexibility to assist with various shop needs as they arise Team-oriented mindset with a commitment to customer satisfaction Ready to Take Pride in Your Work? If you re dependable, detail-oriented, and looking to be part of a company that values your contributions and supports your growth, we d love to meet you. Apply today and become part of the CollisionRight family! This position description is intended to be dynamic and subject to change. Position requirements and essential functions may be altered from time to time based upon the needs of the organization and department. This position may be required to execute special projects or other related duties on occasion.

JOB TITLE: Quality Technician (Dimensional) FLSA STATUS: Non Exempt REPORTS TO: Technical Manager, Dimensional Engineering Utilizing the latest PC-DMIS CMM Programming Software, product CAD data, and customer drawings (GD&T) this position is responsible for developing the measurement programs and collecting the measurement data used by engineering and manufacturing to ensure the products we sell meet or exceed our customers' expectations. The Quality Technician (Dimensional) is responsible for creating inspection reports, providing reasoned feedback regarding the products being measured, and maintaining traceability between the inspection reports, CMM Programs, Product CAD, and GD&T Drawings. Coordinates and interfaces with Project, Manufacturing, and Quality Engineers and Program Managers to ensure customer requirements are met. RESPONSIBILITIES AND DUTIES Under general supervision, the Quality Technician (Dimensional) is responsible for the following tasks: Directs, Develops, and Performs Dimensional Inspections to ensure compliance with engineering and customer specifications. Develops Inspection Programs that satisfy the requirements outlined in laboratory requests, supplied GD&T drawings and other customer specifications. Performs multi-piece dimensional inspections that utilize CMM, Optical Comparator and/or other appropriate measurement equipment to ensure the collection of accurate measurement information. Records measurements, reviews, and compiles measurement results into official reports Identifies issues during the inspection process and provides feedback to the requisitioning engineer. Works within the lab schedule to ensure that inspection projects are completed on time and equipment is utilized efficiently. Preforms verification of metrology equipment (ASME B89), maintains equipment performance logs. Performs Gage Certification, CMM Gage R&R and Capability Studies Other duties and tasks as assigned. EDUCATION AND EXPERIENCE A minimum of 6 years CMM experience with at least 4 years of programming experience SKILLS AND ABILITIES: A working knowledge of PC-DMIS CMM Programming Software and Microsoft Excel A working knowledge of Geometric Dimensioning and Tolerancing (GD&T) and the interpretation of engineering drawings. Possesses good spatial reasoning. Fluent in English. Possesses the ability learn quickly and make reasoned decisions based on limited information as demonstrated by a minimum score of 50 on the Wonderlic Select Assessment (Traditional score of 20 on the cognitive portion). Automotive quality control and CAD experience is a plus. Agreement to complete all post-hire required training. TRAVEL REQUIREMENTS This position typically does require less than 5% travel. DISCLAIMER The information contained in this job description is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time.

Job Description - Quality Technician Department: Quality The Quality Engineer is responsible for supporting and improving all aspects of the Quality Management System (QMS) through inspection, auditing, problem-solving, and process improvement activities. This role will focus on ensuring product conformance, reducing scrap, supporting production teams, and maintaining compliance with customer, internal, and regulatory requirements. The Quality Engineer will also collaborate with cross-functional teams to drive corrective actions, prevent recurrence of issues, and continuously improve product and process quality. Key Responsibilities Inspection & Verification Perform receiving inspections on incoming materials to verify conformance to specifications. Utilize FARO CMM equipment for precise dimensional inspections. Conduct hydrostatic testing, weld etching, and other verification tests to ensure product integrity. Quality Systems & Documentation Maintain accurate paperwork screening and documentation per ISO/IATF requirements. Develop, update, and audit work instructions, control plans, and PFMEAs. Ensure calibration of gauges, jigs, and measurement devices is maintained and documented. Support MSA (Measurement System Analysis) to validate accuracy and repeatability of inspection methods. Process & Product Quality Monitor and track scrap to identify trends, drive root cause analysis, and implement corrective actions. Participate in Layered Process Audits (LPA), driving accountability across operations. Support production teams in jig validation, tooling checks, and process capability analysis. Continuous Improvement & Problem-Solving Work cross-functionally with engineering, production, and maintenance teams to address quality issues. Lead audits (internal and external) and follow-up on corrective and preventive actions (CAPA). Use Excel and data analysis tools to generate quality reports and track key performance indicators. Collaborate with team members to implement corrective actions and prevent recurrence of issues.

Fisher Dynamics is the automotive industry's premier supplier of safety - critical seat structures and mechanisms. Steeped in a tradition of excellence, and rooted in automotive innovation, the Fisher story is filled with automotive manufacturing milestones. We bring design, engineering, and manufacturing vehicle seating systems to a new level with innovative thinking. We're about cutting edge ideas. We have created an environment that encourages an uninterrupted flow of revolutionary concepts and unique ideas Fisher is currently seeking a Quality Technician on 1st shift at our Saint Clair Shores, MI facility. This position is responsible for inspecting and monitoring parts to ensure good quality parts are produced. Lead and or support the production area in continuous improvement efforts. Ensure quality products are delivered to customers and address customer concerns and issues. The department is structured as a formal team, and requires the ability to work within the team. Essential Duties & Responsibilities: Set-up and check dimensions on parts, using metrology instruments, to ensure parts meet quality standards and that dimensions are accurate Enter data into the computer from paper documents for record keeping purposes Check, sort, and file paperwork Red tag and create repair orders for non-conforming parts Interface with the Quality Manager to address quality issues Resolve customer issues at the customer level Ability to act as liaison between the company and the customer Perform gage studies and capability studies Problem solving Continuous improvement activities, support Red X / DOE activities Various other duties as required by the department Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience Two to Four years of experience preferred Skills Ability to follow established procedures Strong attention to detail and multi-tasking ability Knowledge of IATF16949 quality standards and Statistical process control (SPC); stamping; GD&T with applications and blueprint reading. Must be able to operate basic metrology instruments, optical comparator, hardness tester and Coordinate Measurement Machine. Calibration of equipment gages Perform sorts, audits or rework products Quality standards - AIAG/ASQC. ASME, ISO Communication skills to communicate and interact with all levels of employees, customers and suppliers Computer skills and math skills sufficient to perform department related tasks are required Ability to work effectively with people Licensure Valid driver's license Safety Safety glasses and hearing protection required. Other safety equipment required on an as needed basis. Work Environment Working environment and physical requirements of this position are those typical of an office setting and manufacturing environment. Physical Demands Working environment and physical requirements of this position are those typical of a manufacturing environment. Job requires very frequent visual effort and concentration, and the ability to move throughout the plant. The ability to lift 40 pounds is required. The work requires regular standing, moving about, and involves a variety of physical activities. Travel to customer locations as needed.

Job Title: Quality Technician Reports to: Supervisor of designated department FLSA Status: Non-Exempt Schedule: (Monday-Thursday) extended hours may be required to support business needs Primary duties and responsibilities: Process documentation associated with HTR's, PPAP, QIP, Data Sheets, PQCT, and PFMEA. Customer support and point of contact for quality-related issues. Confirm and isolate suspected off-quality product and conduct basic root cause analysis. Collect and monitor data for internal and external suppliers. Maintain and update quality documents in Plexus. Support Quality Manager with goals set forth in department business plan. Assist with New Model Group and Research and Development as needed. Update quality documents for manufacturing usage. Other tasks and responsibilities as assigned by Management. Adhere to and maintain the following policies, procedures and guidelines: Safety Quality ISO 9000 and 14001 Associate Handbook 5-S Education, prior work experience and specialized skills and knowledge: High school diploma or GED equivalent. Must be able to follow detailed instructions. Excellent written and verbal communication skills. Strong computer and organizational skills. Good analytical problem solving skills. Able to read and understand drawings and blueprints. Able to maintain confidential information. Self-motivated team player. Successful completion of role-specific testing. Physical environment/work conditions: The position is in the factory and could involve sitting, standing, walking and lifting for long periods of time throughout the day. Other (e.g., customer contact or access to confidential information): This position works in a production environment. The position will report directly to the Production supervisor and will have daily interaction with other team members. This job description describes the general nature, and the level of work performed by the team members assigned to this position. It does not state, or imply that these are the only duties, and responsibilities assigned to the job. The team members may be required to perform other job-related duties as requested by Modineer. All requirements are subject to change over time, and the possibility of modifications to reasonably accommodate individuals with a disability.

Job Description SUMMARY: The Quality Technician is primarily responsible for ensuring product quality by conducting inspections, verifying compliance with quality standards, supporting assembly, molding and paint operations, and maintaining accurate documentation. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. · Perform first-piece inspections on all active molding and assembly presses at the start of the shift including color checks, SPC measurements, and gaging. · Collect parts from molding and assembly for SPC checks once per shift. · Make quality decisions per the proper standards and samples. · Review, create, and sign off on labels, mold/color change logs, and other required documentation for management. · Review and update quality alerts; ensure alerts are properly addressed. · Conduct mid-shift audits via various documents and record findings. · Contain and clearly label any defective parts found during the shift. · Respond to operator-reported issues and ensure defective items are held from production. · Sort parts on hold during downtime and return acceptable parts to production or remove from the system. · Assist in updating Work Instructions (WI) and document changes. · Support color checks, gloss testing, and film build measurements. · Clearly label, contain, and segregate suspect or rejected parts in accordance with company protocols. · Any other project deemed necessary by Department head(s). · Maintain compliance of IATF 16949 / ISO 9001 / ISO 14001. Follows all safety, housekeeping and company policies and procedures. Coordinates and maintains all job responsibilities in a continuous and flexible manner and performs other related duties and job assignments as required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Proven experience in quality inspection within a manufacturing or assembly environment. Ability to perform color evaluations for the Farnsworth-Munsell 100 Hue Test. Comfortable using Microsoft Office Suite (Word, Excel, Outlook, etc.). Strong attention to detail and organizational skills. Ability to work 12-hour shifts and weekends based on production demands. Strong verbal communication skills to engage with diverse teams; people oriented. Ability to interpret and enforce quality standards and work instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, and walk. Occasionally bend, squat, reach, twist/turn and lift up to 10 lbs. Specific vision abilities required by this job include ability to adjust focus. Powered by ExactHire:149476

Job Title: Quality Technician Reports to: Business Unit Leader FLSA Status: Non-exempt Schedule: 5 x 8 hour shifts Summary of duties and responsibilities: A Quality Technician will perform any or all the following tasks in a safe and timely manner: Primary duties and responsibilities: •Conduct hourly audits of all active work centers in your designated area to ensure products meet customer and internal requirements. •Ensure that all Modineer and Plant 6 specific procedures are being adhered to adequately, focusing on quality inspections and conforming material. •Provide immediate support to operators and production leads regarding quality concerns. •Train operators on performing quality checks and ensure their understanding of quality alerts. •Help create or revise Standard Work Instructions, check sheets, and visual aids. •Assist with reworking or sorting of suspect material. •Contribute to general quality team tasks such as maintaining quality items, 5S, & posting quality documentation. •Assist Quality Engineers or Supervisors in documenting non-conformances or recurring issues for further root cause analysis. •Manipulate small objects, such as measuring devices on a routine basis. •Move at a moderate to fast pace across specified terrain for extended periods of time. Education, prior work experience and specialized skills and knowledge: •Ability to understand and follow instructions in English. •Communication skills. •Manual dexterity. •Collaboration within quality team and communication with cross functional teams. •Use a computer, keyboard, and mouse on a regular basis. •Excellent attendance, attitude, and communication skills are critical. Physical environment/working conditions: The position is in the factory and could involve sitting, standing, walking, and lifting for long periods of time throughout the day. Other (e.g., customer contact or access to confidential information): Must be able to work as part of a team as well as independently. Duties, responsibilities, and activities may change at any time with or without notice.

Duties and Requirements of the Job: * Operate standard equipment in test and process environments. * Follows prescribed work methods in accomplishment of assignments including items such as PPAP systems, GR&R methodology/interpretation. Maintains proper laboratory and test records and files. * Gathers, correlates and applies technical information and data to increase production and quality of company products. * Perform functional and material testing (filled tank drops, bursts, fill studies) * Random dock audits & inspections * Wall dimensional checks * RotoZip cutting on welded tanks * Sets up test and performance evaluations on products and components as required. * Compiles data into various chart forms i.e. histogram, capability charts etc. * Inspects, tests, troubleshoots, repairs, modifies and suggests application of standard or non-standard techniques. * Performs such individual assignments as supervisors and superiors may direct. Ensures adequate and continuous controls are exercised over all assigned activities affecting quality. Required Training, Knowledge and Experience: * This position, although technical in scope, assignment and direction, is not typically occupied by an academically trained or registered engineer. * Metrology laboratory and inspection experience preferred. * 3+ years-related work experience preferred. * Must possess excellent computer and communication skills. * Associates Degree or equivalent combined educational and work experience. Physical Requirements to Perform the Duties of the Job: * Must be able to maneuver (lift/carry/push) as required 35-160 lbs on regular basis * Use lift assists and carts, as required, to transport tanks * Nothing that would prohibit overnight or extended travel. * Ability to travel (including air travel and long automobile trips). Working Conditions: * Occasionally lifts up to 50 pounds and frequently push up to 160 pounds. * Maneuvers in, around, under and about factory and / or laboratory equipment on a regular and continuous basis. * Some of work time is spent standing, walking, lifting and bending. * Works at telephone answering equipment, design equipment and at a PC. * Works within an automotive components manufacturing office and laboratory setting and may be exposed to heat, cold and fumes/chemicals. * May be required to travel to plant and/or customer sites worldwide.

Duties and Requirements of the Job: * Operate standard equipment in test and process environments. * Follows prescribed work methods in accomplishment of assignments including items such as PPAP systems, GR&R methodology/interpretation. Maintains proper laboratory and test records and files. * Gathers, correlates and applies technical information and data to increase production and quality of company products. * Perform functional and material testing (filled tank drops, bursts, fill studies) * Random dock audits & inspections * Wall dimensional checks * RotoZip cutting on welded tanks * Sets up test and performance evaluations on products and components as required. * Compiles data into various chart forms i.e. histogram, capability charts etc. * Inspects, tests, troubleshoots, repairs, modifies and suggests application of standard or non-standard techniques. * Performs such individual assignments as supervisors and superiors may direct. Ensures adequate and continuous controls are exercised over all assigned activities affecting quality. Required Training, Knowledge and Experience: * This position, although technical in scope, assignment and direction, is not typically occupied by an academically trained or registered engineer. * Metrology laboratory and inspection experience preferred. * 3+ years-related work experience preferred. * Must possess excellent computer and communication skills. * Associates Degree or equivalent combined educational and work experience. Physical Requirements to Perform the Duties of the Job: * Must be able to maneuver (lift/carry/push) as required 35-160 lbs on regular basis * Use lift assists and carts, as required, to transport tanks * Nothing that would prohibit overnight or extended travel. * Ability to travel (including air travel and long automobile trips). Working Conditions: * Occasionally lifts up to 50 pounds and frequently push up to 160 pounds. * Maneuvers in, around, under and about factory and / or laboratory equipment on a regular and continuous basis. * Some of work time is spent standing, walking, lifting and bending. * Works at telephone answering equipment, design equipment and at a PC. * Works within an automotive components manufacturing office and laboratory setting and may be exposed to heat, cold and fumes/chemicals. * May be required to travel to plant and/or customer sites worldwide.

Quality Engineer (Industrial Solutions) This position will be based at the BorgWarner Arden facility in Western North Carolina and will transition to a new facility in Hendersonville, NC. About us BorgWarner is a global product leader in delivering innovative and sustainable mobility solutions for the vehicle market. We are a company of innovators and independent thinkers that brings together talented employees, meaningful work, and amazing technology in a unique environment. At BorgWarner we constantly work towards our vision of a clean and energy-efficient world. Our Culture We believe the health and safety of our employees are a top priority. We care about our local communities and the global environment. BorgWarner promotes and nurtures a diverse and inclusive environment, honors integrity, strives for excellence, commits to responsibility for our communities and the environment, and builds on the power of collaboration. Career Opportunities We manage talent as seriously as we manage our businesses and encourage you to learn about our proud history, strong culture, technologies, and future vision. We offer a strong local presence and interesting global opportunities. Start your future with BorgWarner now! For a listing of Asheville/Arden openings: BorgWarner Openings Pay & Benefits All positions start at an above market pay rate for that position. Benefits are also above market and include the below for all fulltime employees: * Day 1 Medical Coverage with potential of no monthly premium * Onsite Health Clinic for employees and dependents (age 14 and over) at no cost * Dental, Vision, Life, AD&D, and Disability Coverage * Tuition Reimbursement Program after 18 months * Retirement Savings Plan (401k) with a matching program * Company paid holidays and vacation starting Day 1 Job purpose The BorgWarner Arden campus offers two world class technical centers and a cutting-edge manufacturing facility that designs and produces turbos, fan, and fan drive components for the automotive industry. The Arden campus offers a multitude of career opportunities and is in the beautiful mountains of Western North Carolina. This position will be based at the BorgWarner Arden facility in Western North Carolina and will transition to a new facility in Hendersonville, NC. We are seeking a highly motivated and experienced Quality Engineer to lead and support the implementation of a robust Quality Management System (QMS) for a startup production line. This role is critical to ensuring a "flawless launch" by establishing and maintaining quality processes, procedures, and compliance standards with a "first time right" mindset. The ideal candidate will be a creative problem solver, a collaborative team player, and a subject matter expert in ISO 9001, UL safety requirements, and other applicable standards. Key Responsibilities * Champion and ensure safe working practices are embedded in all processes. * Serve as the Voice of Quality (VOQ) and primary Quality representative. * Own and manage the DFMEA/PFMEA/Control Plan relationship as it pertains to Quality Engineering. * Lead investigations and resolve complex quality issues through cross-functional collaboration. * Conduct reviews of work results at key milestones and product launches. * Act as a recognized expert in specific commodities and/or processes. * Follow and promote established procedures and industry best practices. * Drive a culture of continuous improvement and lead business process enhancements. * Support / implement assembly line improvements and Permanent Corrective Actions (PCA) and process controls aligned with safety and Mfg standards. * Collaborate across all levels of the organization to deliver accountable results. * Perform other duties as assigned. What we are looking for * Strong team player with excellent interpersonal skills. * Comfortable navigating ambiguity and uncertainty. * Passionate about continuous improvement and innovation. * Data-driven problem solver with creative thinking abilities. * Capable of managing a broad range of responsibilities. * Expertise in Lean/Six Sigma methodologies preferred. * Experience with control systems and electrical/electronics preferred * Proficient in GD&T and Metrology. * Understand operations and manufacturing environment / failure modes. * Understand equipment calibration. * Understanding of Statistical Process Control (SPS) * Strong in Root Cause Analysis and Corrective actions. * Ability to implement quality actions that protect the customer that are also viable in a production environment * Strong mechanical aptitude and hands-on technical skills. * Experience in QMS implementation and management per ISO 9001. * Familiarity with UL compliance and registered parts. Required Qualifications * Bachelor's degree in Mechanical, Electrical, Manufacturing, or Industrial Engineering (or related field). * 8 plus years of experience in a manufacturing or industrial production environment. * At least one of the following Problem-Solving methodologies:8D, Five Why, Fishbone, Shanin Red-X * FMEA and Control Plan experience * Proficiency in Microsoft Office Suite. * Experience with MRP/ERP systems. What we believe * Inclusion: Respecting Individuals * Integrity: Honoring truth * Excellence: Focusing on results * Responsibility: Our commitment * Collaboration: Building trust Safety This position will adhere to the BorgWarner Environmental Health and Safety Program by following all safety rules, procedures, practices, training, and safe use of equipment; this includes use of personal protective equipment (PPE) as required. This individual will work in a way that stresses the importance of preventing injury, accidents, or illnesses to themselves or co-workers by correcting or reporting unsafe situations, incidents, or occurrences to their Team Lead immediately. Equal Employment Opportunity BorgWarner is an equal employment opportunity employer such that all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity/expression, national origin, disability or protected veteran status. Career Scam Disclaimer BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide the national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner's website to verify the authenticity of any employment opportunities. Join the company that is creating solutions that support a cleaner, more energy-efficient world. For more information about BorgWarner, please visit ****************** For a listing of Asheville/Arden openings: BorgWarner Openings Salary Range: $90,800 - $124,850 Internal Use Only: Salary Global Terms of Use and Privacy Statement Carefully read the BorgWarner Privacy Policy before using this website. Your ability to access and use this website and apply for a job at BorgWarner are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms. Career Scam Disclaimer: BorgWarner makes no representations or guarantees regarding employment opportunities listed on any third-party website. To protect against career scams, job applicants should take the necessary precautions when interviewing for and accepting employment positions allegedly offered by BorgWarner. Applicants should never provide their national ID numbers, birth dates, credit card numbers, bank account information or other private information when communicating with prospective employers or responding to employment opportunities online. Job applicants are invited to contact BorgWarner through BorgWarner's website to verify the authenticity of any employment opportunities.