Concrete Finisher jobs at Brasfield & Gorrie - 881 jobs

Thalle Construction Co. Inc. (“Thalle”) is seeking a Concrete Finisher. The Concrete Finisher will report to the Superintendent and work closely with and support the operations team, interact with a variety of staff at all levels and uphold a high level of professionalism and confidentiality. This position is located in Leonard, Texas. Thalle, established in 1947, is a heavy civil construction company with a corporate office in Hillsborough, NC, and a regional office in Alvarado, Texas. Thalle has construction projects throughout the Southeast, Texas, and New Jersey with growth nationwide. Our diverse and expansive project scope of heavy civil infrastructure projects includes dams, reservoirs, locks, DOT roadway construction and bridges, large diameter utilities, landfills, mass excavation, wastewater, and on-demand emergency services. We are a proud representative of Tully Group (******************* The Tully Group is one of the nation's largest privately held, family-owned construction firms with their corporate office in New York City and long history of heavy civil projects in the Metro New York Area and New Jersey. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify user, and Drug Free Workplace. Essential Duties and Responsibilities: Spread, level, and smooth concrete using hand tools. Set forms that hold concrete in place. Finish concrete surfaces. Mold expansion joints and edges using tool and straightedge. Build the molds that retain wet concrete in the construction of concrete structures. Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers. Assemble / Fastn material to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue. Signal truck driver to position truck to direct pouring concrete and move chut to direct concrete on forms. Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surfaces. Wet concrete surface and rub with stone to smooth surface and obtain specified finish. Fill holes and cracks with grout or slurry and smooth using trowel. Push roller over surface to embed chips. Build wooden molds, and clamp molds around area to be repaired using hand tools. Conduct work with 100% integrity and professionalism. Education and/or Work Experience Requirements: High school diploma or equivalent preferred but not mandatory. Ability to receive written or oral instructions. Establish and maintain effective working relationship with field and office personnel. Must be committed to contributing to a culture of safety, looking out for yourself and others. Experience placing conrete preferred. Rebar work experience preferred. Physical Requirements: Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Work long shifts. Work in a variety of weather conditions with exposure to the elements. Must be able to lift and carry up to 50 lbs. Must have good hand-eye coordination, quick reaction times. Able to wear a hard hat, safety glasses, gloves, and safety-toed boots. Able to walk moderate distances to reach work area up to 1/2 mile. Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Must be able to talk, listen and speak clearly on telephone. Must be able to pass a Pre-Employment drug screen. Thalle is an Equal Employment Opportunity Employer. Employment selection and related decisions are made without regard to race, color, sex, religion, age, national origin, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status or any other characteristic protected under federal, state or local law. Thalle is an Equal Opportunity Employer, E-Verify user, and Drug Free Workplace.

Thalle Construction Co. Inc. ("Thalle") is seeking a Concrete Finisher. The Concrete Finisher will report to the Superintendent and work closely with and support the operations team, interact with a variety of staff at all levels and uphold a high level of professionalism and confidentiality. This position is located in Leonard, Texas. Thalle, established in 1947, is a heavy civil construction company with a corporate office in Hillsborough, NC, and a regional office in Alvarado, Texas. Thalle has construction projects throughout the Southeast, Texas, and New Jersey with growth nationwide. Our diverse and expansive project scope of heavy civil infrastructure projects includes dams, reservoirs, locks, DOT roadway construction and bridges, large diameter utilities, landfills, mass excavation, wastewater, and on-demand emergency services. We are a proud representative of Tully Group (******************* The Tully Group is one of the nation's largest privately held, family-owned construction firms with their corporate office in New York City and long history of heavy civil projects in the Metro New York Area and New Jersey. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify user, and Drug Free Workplace. Essential Duties and Responsibilities: * Spread, level, and smooth concrete using hand tools. * Set forms that hold concrete in place. * Finish concrete surfaces. * Mold expansion joints and edges using tool and straightedge. * Build the molds that retain wet concrete in the construction of concrete structures. * Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers. * Assemble / Fastn material to make framework or props, using hand tools and wood screws, nails, dowel pins, or glue. * Signal truck driver to position truck to direct pouring concrete and move chut to direct concrete on forms. * Apply hardening and sealing compounds to cure surface of concrete, and waterproof or restore surfaces. * Wet concrete surface and rub with stone to smooth surface and obtain specified finish. * Fill holes and cracks with grout or slurry and smooth using trowel. * Push roller over surface to embed chips. * Build wooden molds, and clamp molds around area to be repaired using hand tools. * Conduct work with 100% integrity and professionalism. Education and/or Work Experience Requirements: * High school diploma or equivalent preferred but not mandatory. * Ability to receive written or oral instructions. * Establish and maintain effective working relationship with field and office personnel. * Must be committed to contributing to a culture of safety, looking out for yourself and others. * Experience placing conrete preferred. * Rebar work experience preferred. Physical Requirements: * Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. * Work long shifts. * Work in a variety of weather conditions with exposure to the elements. * Must be able to lift and carry up to 50 lbs. * Must have good hand-eye coordination, quick reaction times. * Able to wear a hard hat, safety glasses, gloves, and safety-toed boots. * Able to walk moderate distances to reach work area up to 1/2 mile. * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. * Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. * Must be able to talk, listen and speak clearly on telephone. * Must be able to pass a Pre-Employment drug screen. Thalle is an Equal Employment Opportunity Employer. Employment selection and related decisions are made without regard to race, color, sex, religion, age, national origin, disability, sexual orientation, gender identity, pregnancy, genetic information, veteran status or any other characteristic protected under federal, state or local law. Thalle is an Equal Opportunity Employer, E-Verify user, and Drug Free Workplace. Apply to this job

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. This position pays $28 an hour Responsibilities * Set up and align forms for concrete according to blueprints or plans. * Mix, pour, and spread concrete in specified proportions. * Smooth, level, and finish freshly poured concrete using trowels, floats, and screeds. * Monitor the effects of weather conditions on concrete curing and make necessary adjustments. * Apply sealing and hardening components to cure surfaces. * Create textured or decorative surfaces by imprinting patterns in fresh concrete. * Cut expansion joints into concrete using saws and cutting tools. * Clean and maintain tools and equipment. * Supervise and train junior workers on proper techniques and tool usage. * Maintain a clean job site; picks up tools and equipment. * Other duties as assigned. Requirements * Knowledgeable in OSHA standards High school diploma or equivalent * Must have a valid Driver's License with reliable transportation * Must be able to pass a background check for SIDA airport badge clearance * Proven experience as a Cement Finisher or similar role * Ability to read and interpret blueprints and plans * Strong knowledge of concrete mixing, pouring, and finishing techniques * Familiarity with power tools and machinery used in concrete finishing * Physical stamina and strength to handle heavy materials and work in various weather conditions * Attention to detail and a commitment to quality workmanship * Good communication and teamwork skills. Working Conditions * Travel - This project is located in the Charlotte, NC area, with the potential of other locations throughout the Eastern Region. * Construction Site Environment - physical ability to stand, walk, crawl, bend, reach and climb. Lifting and carrying material and objects. Exposed to high noise levels. Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionSalary: $22-$26 DOE The Journeyman Concrete Finisher is responsible for performing a wide range of skilled concrete finishing duties on construction projects. This role includes placing, finishing, protecting, and repairing concrete surfaces for sidewalks, driveways, roads, curbs, floors, and foundations. The position requires a high degree of craftsmanship, the ability to read construction drawings, and adherence to safety protocols on active job sites. Supervisory Responsibilities: None Duties/Responsibilities: Set concrete forms and ensure proper alignment, depth, and pitch. Pour, level, and smooth concrete using rakes, screeds, and trowels. Apply curing compounds, waterproofing, and surface hardeners. Use hand and power tools such as floats, troweling machines, and edgers to achieve the desired finish. Create decorative textures, patterns, or colors as required (e.g., broom, exposed aggregate, stamped). Cut joints into concrete to help control cracking. Repair damaged concrete surfaces and perform patchwork. Interpret blueprints and technical drawings to determine material and layout requirements. Maintain a clean and safe work environment and comply with all OSHA safety guidelines. Required Skills/Abilities: Proficiency in using finishing tools and equipment. Ability to work independently with minimal supervision. Excellent attention to detail and quality control. Ability to interpret and follow technical plans and specifications. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: High school diploma or equivalent required. Minimum of 35 years of experience in concrete finishing. Journeyman certification or equivalent work experience strongly preferred. Familiarity with OSHA safety standards and procedures. Physical Requirements: Must be able to stand, kneel, and walk for extended periods. Must be able to lift 50-75 pounds regularly. Must be able to work outdoors in a variety of conditions, including extreme heat, cold, wind, and rain. Must be comfortable working at heights and on uneven terrain. Requires manual dexterity and strength to use tools and materials. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. Compensation Range (Colorado Only) 0.00-0.00 Any Employment Offers are Contingent Upon Successful Completion of the Following: * Verification of Work Authorization and Employment Eligibility * Substance Abuse Screening * Physical Exam (if applicable) * Background Checks for Badging/Security Clearances (if applicable) Position Description: Cement finishers are responsible for placement and surface preparation of concrete in conformance with the project requirements. This is a safety sensitive position Position Qualifications: * High School Diploma or GED. * Valid Driver's License required. * Follow safe work practices in accordance with the Hensel Phelps safety and health program. * Must be able to take initiative * Possess a keen attention to detail and be able to follow instructions. * Workers must provide their own safety footwear. * Must be able to communicate effectively and professionally. * Strong mathematical reasoning and quantitative skills. * Must be reliable and punctual. Preferred Qualifications: * Experienced in construction layout, blueprint reading and shop drawing reading. * OSHA 10 Certification. * CPR & First Aid Certification. Essential Duties: * Positioning themselves on the concrete forms and moving the pump hose or concrete bucket into place for the pouring of the concrete. * Levelling the top surface of freshly poured concrete on floors, walls, ceilings, or sidewalks. Responsible for finishing the concrete surface to meet the tolerances for thickness and flatness before the concrete has cured. Initially, the concrete finisher must strike the concrete with a screed to create a level, smooth surface. * Applies a bull float to the concrete to further smooth the surface and bring the moisture to the top of the concrete area. The float is operated by a concrete finisher applying pressure to the float as it is moved back and forth over the concrete. * Applying hardening and sealing compounds to cure the surface of concrete. This includes waterproofing, damp-proofing, and restoring concrete surfaces. * Installing anchor bolts, steel plates and other fixtures in freshly poured concrete. * Operates a trowel to finish the surface when the concrete has reached a semi-cured status. Moves the machine over the concrete surface to level the concrete and develop the desired finish. Follows up with the finish trowel using the steel trowel. Often, after the mechanical trowel has been used, the final troweling is performed by the concrete finisher using a 14-inch steel trowel. * Promotes a safe work environment and communicates jobsite hazards. Physical Work Classification & Demands: * Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. * The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. * Walking - The person in this position needs to frequently move about the jobsite. * Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. * The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. * Constantly reads written communications and views mail submissions. Will also need to read and understand blueprints, load charts, and take/verify field measurements. * Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. * Working from heights - the person must be comfortable and able to work from heights for extended amounts of time. * Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. * Stooping - Bending the body downward and forward by the spine at the waist. * Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. * Grasping - Needs to apply pressure to an object with fingers and palm regularly. * Visual acuity and ability to operate a vehicle as certified and appropriate. * Occasionally exposed to high and low temperatures. * Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. * Use of hands and wrists with various tools. * Prolonged use of jackhammer and pavement breaker. * Use of wheelbarrows and brooms. * Repetitive use of hands and wrists using power, rotational, and vibration tools including prolonged use of jackhammers and pavement breakers. * Tolerate legally permissible exposure to dusts and chemicals, such as cement dust, solvents, and curing compounds. * The person must be able to safely wear a respirator and is able to pass applicable medical and fit testing examinations. * Must be able to hear commands from supervisors and back-up safety alarms on equipment. Benefits: Hensel Phelps provides generous benefits for our full-time employees. This position is eligible for company-paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). Hensel Phelps also believes in the importance of taking time to recharge. As a result, employees are eligible for paid time off beginning upon hire. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity and affirmative action employer. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. Compensation Range (Colorado Only) 0.00-0.00 Any Employment Offers are Contingent Upon Successful Completion of the Following: - Verification of Work Authorization and Employment Eligibility - Substance Abuse Screening - Physical Exam (if applicable) - Background Checks for Badging/Security Clearances (if applicable) **Position Description:** Cement finishers are responsible for placement and surface preparation of concrete in conformance with the project requirements. This is a safety sensitive position **Position Qualifications:** - High School Diploma or GED. - Valid Driver's License required. - Follow safe work practices in accordance with the Hensel Phelps safety and health program. - Must be able to take initiative - Possess a keen attention to detail and be able to follow instructions. - Workers must provide their own safety footwear. - Must be able to communicate effectively and professionally. - Strong mathematical reasoning and quantitative skills. - Must be reliable and punctual. Preferred Qualifications: - Experienced in construction layout, blueprint reading and shop drawing reading. - OSHA 10 Certification. - CPR & First Aid Certification. Essential Duties: - Positioning themselves on the concrete forms and moving the pump hose or concrete bucket into place for the pouring of the concrete. - Levelling the top surface of freshly poured concrete on floors, walls, ceilings, or sidewalks. Responsible for finishing the concrete surface to meet the tolerances for thickness and flatness before the concrete has cured. Initially, the concrete finisher must strike the concrete with a screed to create a level, smooth surface. - Applies a bull float to the concrete to further smooth the surface and bring the moisture to the top of the concrete area. The float is operated by a concrete finisher applying pressure to the float as it is moved back and forth over the concrete. - Applying hardening and sealing compounds to cure the surface of concrete. This includes waterproofing, damp-proofing, and restoring concrete surfaces. - Installing anchor bolts, steel plates and other fixtures in freshly poured concrete. - Operates a trowel to finish the surface when the concrete has reached a semi-cured status. Moves the machine over the concrete surface to level the concrete and develop the desired finish. Follows up with the finish trowel using the steel trowel. Often, after the mechanical trowel has been used, the final troweling is performed by the concrete finisher using a 14-inch steel trowel. - Promotes a safe work environment and communicates jobsite hazards. **Physical Work Classification & Demands:** - Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. - The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. - Walking - The person in this position needs to frequently move about the jobsite. - Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. - The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. - Constantly reads written communications and views mail submissions. Will also need to read and understand blueprints, load charts, and take/verify field measurements. - Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. - Working from heights - the person must be comfortable and able to work from heights for extended amounts of time. - Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. - Stooping - Bending the body downward and forward by the spine at the waist. - Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. - Grasping - Needs to apply pressure to an object with fingers and palm regularly. - Visual acuity and ability to operate a vehicle as certified and appropriate. - Occasionally exposed to high and low temperatures. - Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. - Use of hands and wrists with various tools. - Prolonged use of jackhammer and pavement breaker. - Use of wheelbarrows and brooms. - Repetitive use of hands and wrists using power, rotational, and vibration tools including prolonged use of jackhammers and pavement breakers. - Tolerate legally permissible exposure to dusts and chemicals, such as cement dust, solvents, and curing compounds. - The person must be able to safely wear a respirator and is able to pass applicable medical and fit testing examinations. - Must be able to hear commands from supervisors and back-up safety alarms on equipment. **Benefits:** Hensel Phelps provides generous benefits for our full-time employees. This position is eligible for company-paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). Hensel Phelps also believes in the importance of taking time to recharge. As a result, employees are eligible for paid time off beginning upon hire. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). **Equal Opportunity and Affirmative Action Employer:** Hensel Phelps is an equal opportunity and affirmative action employer. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The Concrete Finisher must work safely and productively on various sized Concrete Construction and/or Civil and Infrastructure project sites. A successful candidate in this role must be highly motivated and willing to complete any task assigned, along with performing the essential duties of the Concrete Finisher position. All employees are expected to communicate, always build relationships with other team members, and use good judgment. The Concrete Finisher is expected to have the ability to perform all duties of the positions preceding it in its specific career path, while being responsible and accountable to complete any other tasks assigned. ESSENTIAL DUTIES * Uses and monitors quality and production of straight edge and "magic screed" to level/shape freshly poured concrete. * Checks rod floor for flatness. * Assists with truck chute and pump hose to place fresh concrete. * Uses "edger", jointers, and straight edge to edge and joint concrete floors as required. * Finishes slab edges using hand tools. * Operates forklifts (with certification) to convey concrete finishing equipment between trucks and floor slabs and decks during and after the concrete finishing process. * Operates light and advanced equipment (e.g., truss-type hardener spreader, truss screeds, bull floats, and lifting equipment, etc.) to level and treat concrete slab surfaces. * Operates at advanced level trowel machinery and equipment in the concrete finishing process. * QCs and patches defects with cement mortar as necessary or requested. * Applies specified amounts of surface hardeners on concrete to produce special surfaces. * Ensures concrete slab with curing mats or waterproof paper. Wires corners of mats to top edge of forms or stakes, or places weights such as boards, rocks, and/or sandbags to keep covers in place. * Coaches and trains apprentices and Concrete Finisher Technicians. * Cleans and properly maintains all hand and power tools used to place and finish fresh concrete. * Complies with all applicable company, state, and OSHA safety rules, regulations, and guidelines at the job site. * Reports any job site and/or WBC employee related safety violation(s) to appropriate supervisory personnel. * Serves as a safe and productive member of a finishing crew/team. Education and/or Experience * High School Diploma / GED Knowledge, Skills and Abilities Required * Basic level communication (Reading, writing and comprehending technical documents, safety regulations, checklists, responding to managers/coworkers, etc.) * Safety awareness (Ability to recognize and correct safety hazards.) * Detail Orientation (Ability to pay attention to details in order to follow instructions and execute work in accordance with specifications and safety/quality standards. * Basic level reasoning (Ability to comprehend and carry out verbal or written instructions while understanding how to problem-solve and complete task(s) when dealing with one variable. * Report major equipment repair needs to foreman, superintendent, or service center supervisor. * Tag out equipment that needs major mechanical or safety repairs. * Report any safety incidents to appropriate supervisory personnel. * Screed concrete by hand. * Screed concrete with mechanical power tools. * Consolidate concrete with concrete vibrator. * Establish grade pads for screeding elevation. * Check rod concrete * Push/pull concrete to grade using come along/shovel. * Float concrete along penetration and edges using a hand float. * Generate various output file formats (.dwg, .pdf,.icf, etc.) from model as needed * Place dowel baskets during concrete placement * Drive grade pins below grade after concrete grade pads have been established). * Load/unload appropriate tools in/out of company truck. * Drive crew truck/trailer to/from job site * Apply evaporation retarder. * Apply dry shake surface hardener. * Add fibers and admixtures to concrete trucks as required. * Install poly slip sheets. * Perform all assigned roles, responsibilities, and related work processes / tasks in the safest possible manner. Ensure that a safe, accident/incident-free work environment is maintained for all co-workers, customers, clients, suppliers, etc. at all times Working Conditions * Working outdoors, exposed to changing temperature and weather conditions. - frequently. * Exposed to loud noises * Walking and riding on uneven terrain. * Wearing Personal Protection Equipment at all times. * Traveling by land or air and staying out of town overnight - frequently * 40 to 60-hour work week Certificates, Licenses, Registrations * Valid Driver's License * First Aid / CPR - preferred * OSHA 10 Certificate - preferred * WB Rough Terrain Forklift Certification Physical Demands * Standing for long periods of time. * Lifting, carrying, and moving up to 90 lbs. Wayne Brothers, Inc is an Equal Employment Opportunity/ Affirmative Action Employer. Read our EEO/AAE policy.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Plan, lay-out and perform all types of Concrete work in accordance with all applicable plans, specifications, codes, and industry standards. Knowledge of how to use concrete tools such as but not limited to a bull float, trowel, edger, and concrete vibrator. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities Maintain positive working relationships with all members of the crew. Produce high quality work, safely and productively at all times. Provide feedback to ensure all materials, tools, equipment, and information is available for the work. Look for opportunities for improvement in all tasks, means, and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. High proficiency in all related trade mathematics. Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. Eliminate WASTE such as waiting, rework, transporting, material storage and time. Minimum Job Requirements Must have a minimum of one year (level I), two years (level II), three years (level III) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. Must be willing to travel to other states. Must be able to read and understand drawings, specifications, safety and quality standards, and effectively utilize all trade tools and equipment relevant to the work. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. Will lift, push, or pull objects up to 50lbs. on an occasional basis Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply with all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend, on an occasional basis Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) Move in and around confined, cluttered, and uneven areas. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt Inc. is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, religion, sex, sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, or genetic information. We recognize that diversity and inclusion is a driving force in the success of our company. Benefits: Market Competitive Salary (paid weekly) Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting after 60 days of continuous employment Sick Leave and Paid Time Off (PTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Role and Responsibilities Lay and install bricks, blocks, stone, and other masonry materials according to blueprints, drawings, and project specifications. Prepare and clean surfaces, ensuring proper bonding materials and techniques are used for all installations. Measure and cut materials to fit project requirements, ensuring precision and accuracy in all aspects of the work. Mix and apply mortar, grout, and other bonding agents to secure masonry materials in place. Work with a variety of masonry materials, including brick, stone, concrete blocks, and cultured stone, ensuring correct installation and finishing. Ensure that all work complies with safety codes, building codes, and project specifications. Repair and maintain masonry structures, including patching, re-pointing, and replacing damaged materials. Assist in the installation of decorative masonry elements, such as arches, columns, and veneers. Follow safety procedures and guidelines to maintain a safe work environment. Work alongside other trades and contractors to ensure the timely and successful completion of projects. Maintain and care for tools and equipment, ensuring they are in good working order. Maintain a clean and organized work area, disposing of waste materials properly. Keep track of materials used and report inventory needs to supervisors. Perform other duties as required by the foreman or project manager. Qualifications and Education Requirements Completion of an apprenticeship or journeyman program in bricklaying or masonry. 5+ years of experience as a bricklayer or mason in a construction environment. Strong knowledge of masonry techniques, tools, and materials. Ability to read and interpret blueprints, sketches, and project specifications. Proficiency in measuring, cutting, and laying masonry materials with precision. Knowledge of building codes, safety regulations, and best practices in bricklaying. Ability to work independently or as part of a team to complete projects efficiently and on time. Strong attention to detail and quality craftsmanship. Physical stamina to perform heavy lifting, bending, and working in various weather conditions. Excellent problem-solving skills and the ability to troubleshoot on-site issues. Valid driver's license and reliable transportation. Preferred Skills: Certification or additional training in masonry or construction safety (e.g., OSHA). Experience with specialized masonry techniques or decorative bricklaying. Familiarity with construction management software or tools. Physical Requirements Work is primarily performed on construction job sites, exposed to outdoor elements and varying weather conditions. Some physical labor is required, including lifting and carrying materials, as well as climbing and working at heights. Personal protective equipment (PPE) must be worn at all times. The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses/spoggles, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Plant Services, Inc. is on an “at-will” basis. There is no contract of employment between Thorpe Plant Services, Inc. and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves

**Any Employment Offers are Contingent Upon Successful Completion of the Following:** + Verification of Work Authorization and Employment Eligibility + Substance Abuse Screening + Physical Exam (if applicable) + Background Checks for Badging/Security Clearances (if applicable) **About Hensel Phelps:** Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. **Position Description:** Cement finishers are responsible for placement and surface preparation of concrete in conformance with the project requirements. This is a safety sensitive position. **Position Qualifications:** + High School Diploma or GED. + Valid Driver's License required. + Follow safe work practices in accordance with the Hensel Phelps safety and health program. + Must be able to take initiative + Possess a keen attention to detail and be able to follow instructions. + Workers must provide their own safety footwear. + Must be able to communicate effectively and professionally. + Strong mathematical reasoning and quantitative skills. + Must be reliable and punctual. _Preferred Qualifications:_ + Experienced in construction layout, blueprint reading and shop drawing reading. + OSHA 10 Certification. + CPR & First Aid Certification. **Essential Duties:** + Positioning themselves on the concrete forms and moving the pump hose or concrete bucket into place for the pouring of the concrete. + Levelling the top surface of freshly poured concrete on floors, walls, ceilings, or sidewalks. Responsible for finishing the concrete surface to meet the tolerances for thickness and flatness before the concrete has cured. Initially, the concrete finisher must strike the concrete with a screed to create a level, smooth surface. + Applies a bull float to the concrete to further smooth the surface and bring the moisture to the top of the concrete area. The float is operated by a concrete finisher applying pressure to the float as it is moved back and forth over the concrete. + Applying hardening and sealing compounds to cure the surface of concrete. This includes waterproofing, damp-proofing, and restoring concrete surfaces. + Installing anchor bolts, steel plates and other fixtures in freshly poured concrete. + Operates a trowel to finish the surface when the concrete has reached a semi-cured status. Moves the machine over the concrete surface to level the concrete and develop the desired finish. Follows up with the finish trowel using the steel trowel. Often, after the mechanical trowel has been used, the final troweling is performed by the concrete finisher using a 14-inch steel trowel. + Promotes a safe work environment and communicates jobsite hazards. **Physical Work Classification & Demands:** + Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. + The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. + Walking - The person in this position needs to frequently move about the jobsite. + Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. + The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. + Constantly reads written communications and views mail submissions. Will also need to read and understand blueprints, load charts, and take/verify field measurements. + Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. + Working from heights - the person must be comfortable and able to work from heights for extended amounts of time. + Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. + Stooping - Bending the body downward and forward by the spine at the waist. + Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. + Grasping - Needs to apply pressure to an object with fingers and palm regularly. + Visual acuity and ability to operate a vehicle as certified and appropriate. + Occasionally exposed to high and low temperatures. + Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. + Use of hands and wrists with various tools. + Prolonged use of jackhammer and pavement breaker. + Use of wheelbarrows and brooms. + Repetitive use of hands and wrists using power, rotational, and vibration tools including prolonged use of jackhammers and pavement breakers. + Tolerate legally permissible exposure to dusts and chemicals, such as cement dust, solvents, and curing compounds. + The person must be able to safely wear a respirator and is able to pass applicable medical and fit testing examinations. + Must be able to hear commands from supervisors and back-up safety alarms on equipment. **Benefits:** Hensel Phelps provides generous benefits for our full-time employees. This position is eligible for company-paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). Hensel Phelps also believes in the importance of taking time to recharge. As a result, employees are eligible for paid time off beginning upon hire. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). **Equal Opportunity and Affirmative Action Employer:** Hensel Phelps is an equal opportunity and affirmative action employer. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Any Employment Offers are Contingent Upon Successful Completion of the Following: * Verification of Work Authorization and Employment Eligibility * Substance Abuse Screening * Physical Exam (if applicable) * Background Checks for Badging/Security Clearances (if applicable) About Hensel Phelps: Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. Position Description: Cement finishers are responsible for placement and surface preparation of concrete in conformance with the project requirements. This is a safety sensitive position. Position Qualifications: * High School Diploma or GED. * Valid Driver's License required. * Follow safe work practices in accordance with the Hensel Phelps safety and health program. * Must be able to take initiative * Possess a keen attention to detail and be able to follow instructions. * Workers must provide their own safety footwear. * Must be able to communicate effectively and professionally. * Strong mathematical reasoning and quantitative skills. * Must be reliable and punctual. Preferred Qualifications: * Experienced in construction layout, blueprint reading and shop drawing reading. * OSHA 10 Certification. * CPR & First Aid Certification. Essential Duties: * Positioning themselves on the concrete forms and moving the pump hose or concrete bucket into place for the pouring of the concrete. * Levelling the top surface of freshly poured concrete on floors, walls, ceilings, or sidewalks. Responsible for finishing the concrete surface to meet the tolerances for thickness and flatness before the concrete has cured. Initially, the concrete finisher must strike the concrete with a screed to create a level, smooth surface. * Applies a bull float to the concrete to further smooth the surface and bring the moisture to the top of the concrete area. The float is operated by a concrete finisher applying pressure to the float as it is moved back and forth over the concrete. * Applying hardening and sealing compounds to cure the surface of concrete. This includes waterproofing, damp-proofing, and restoring concrete surfaces. * Installing anchor bolts, steel plates and other fixtures in freshly poured concrete. * Operates a trowel to finish the surface when the concrete has reached a semi-cured status. Moves the machine over the concrete surface to level the concrete and develop the desired finish. Follows up with the finish trowel using the steel trowel. Often, after the mechanical trowel has been used, the final troweling is performed by the concrete finisher using a 14-inch steel trowel. * Promotes a safe work environment and communicates jobsite hazards. Physical Work Classification & Demands: * Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. * The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. * Walking - The person in this position needs to frequently move about the jobsite. * Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. * The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. * Constantly reads written communications and views mail submissions. Will also need to read and understand blueprints, load charts, and take/verify field measurements. * Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. * Working from heights - the person must be comfortable and able to work from heights for extended amounts of time. * Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. * Stooping - Bending the body downward and forward by the spine at the waist. * Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. * Grasping - Needs to apply pressure to an object with fingers and palm regularly. * Visual acuity and ability to operate a vehicle as certified and appropriate. * Occasionally exposed to high and low temperatures. * Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. * Use of hands and wrists with various tools. * Prolonged use of jackhammer and pavement breaker. * Use of wheelbarrows and brooms. * Repetitive use of hands and wrists using power, rotational, and vibration tools including prolonged use of jackhammers and pavement breakers. * Tolerate legally permissible exposure to dusts and chemicals, such as cement dust, solvents, and curing compounds. * The person must be able to safely wear a respirator and is able to pass applicable medical and fit testing examinations. * Must be able to hear commands from supervisors and back-up safety alarms on equipment. Benefits: Hensel Phelps provides generous benefits for our full-time employees. This position is eligible for company-paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). Hensel Phelps also believes in the importance of taking time to recharge. As a result, employees are eligible for paid time off beginning upon hire. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity and affirmative action employer. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Austin Bridge & Road is currently seeking experienced Concrete Finishers for our North Texas Concrete Paving projects. We excel at what we do and are looking for talented construction professionals that want to excel with us. The Concrete Finisher is responsible for smoothing and finishing surfaces of poured concrete floors, walls, sidewalks to specified textures, using hand tools or power tools, including floats, trowels and screeds. Signals concrete deliverer to position truck to facilitate pouring concrete moves discharge chute of truck to direct concrete into forms. Spreads concrete into inaccessible sections of forms, using rake or shovel. Levels concrete to specified depth and workable consistency, using hand-held screed and floats to bring water to surface and produce soft topping. Smooth and shapes surfaces of freshly poured concrete, using straightedge and float or power screed. Finishes concrete surfaces using power trowel, or wets and rubs concrete with abrasive stone to impart finish. Removes rough or defective spots from concrete surfaces, using grinder or power chisel and hammer, and parches holes with fresh concrete or epoxy compound. Molds expansion joints and edges, using edging tools, Jointers and straightedge. May sprinkle colored stone chips, powdered steel, or coloring powder on concrete to produce prescribed finish. **Responsibilities** + Perform daily equipment maintenance and inspections + Assist paving crew with site preparation and any other activity as needed + Participate as a vital team member, contributing towards Austin's success + Attend daily safety meetings + Follow safety policies and procedures + Work hours adjusted to meet the project's needs; days, nights and weekends + Able to work in adverse weather conditions, hot or cold temperatures + Other duties as assigned **Qualifications** + 1+ years of experience operating asphalt equipment + Must have a strong commitment to jobsite safety + Diligent in demonstrating safe work practices. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Bridge & Road is unable to sponsor or take over sponsorship of an employment visa for this position **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Bridge & Road is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **About Austin Bridge and Road** A leader in the heavy highway and transportation industry for more than 100 years, Austin Bridge & Road delivers asphalt and concrete services, and builds landmark projects such as complex highway interchanges, tollways, runways, bridges, rail projects, and water/wastewater facilities. To learn more about us, visit ************************************************* . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Anderson Columbia Co., Inc. is accepting resumes for Experienced Bridge Concrete Finishers. Valid Driver's License and reliable transportation required. Must be willing to travel for work. Must maintain reliable attendance. Must meet company safety and performance standards. Ability to adapt to different personalities/self-starter. Must pass a heavy demand pre-employment physical/drug test. The duties can change daily depending on the project and weather. Wage: $17 - $24 *DOE* Benefits: Medical Vision Dental 401K You will receive a confirmation email after you successfully submit your resume. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

The Journeyman Concrete Finisher is responsible for performing a wide range of skilled concrete finishing duties on construction projects. This role includes placing, finishing, protecting, and repairing concrete surfaces for sidewalks, driveways, roads, curbs, floors, and foundations. The position requires a high degree of craftsmanship, the ability to read construction drawings, and adherence to safety protocols on active job sites. Supervisory Responsibilities: None Duties/Responsibilities: * Set concrete forms and ensure proper alignment, depth, and pitch. * Pour, level, and smooth concrete using rakes, screeds, and trowels. * Apply curing compounds, waterproofing, and surface hardeners. * Use hand and power tools such as floats, troweling machines, and edgers to achieve the desired finish. * Create decorative textures, patterns, or colors as required (e.g., broom, exposed aggregate, stamped). * Cut joints into concrete to help control cracking. * Repair damaged concrete surfaces and perform patchwork. * Interpret blueprints and technical drawings to determine material and layout requirements. * Maintain a clean and safe work environment and comply with all OSHA safety guidelines. Required Skills/Abilities: * Proficiency in using finishing tools and equipment. * Ability to work independently with minimal supervision. * Excellent attention to detail and quality control. * Ability to interpret and follow technical plans and specifications. * Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: * High school diploma or equivalent required. * Minimum of 3-5 years of experience in concrete finishing. * Journeyman certification or equivalent work experience strongly preferred. * Familiarity with OSHA safety standards and procedures. Physical Requirements: * Must be able to stand, kneel, and walk for extended periods. * Must be able to lift 50-75 pounds regularly. * Must be able to work outdoors in a variety of conditions, including extreme heat, cold, wind, and rain. * Must be comfortable working at heights and on uneven terrain. * Requires manual dexterity and strength to use tools and materials. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

The Journeyman Concrete Finisher is responsible for performing a wide range of skilled concrete finishing duties on construction projects. This role includes placing, finishing, protecting, and repairing concrete surfaces for sidewalks, driveways, roads, curbs, floors, and foundations. The position requires a high degree of craftsmanship, the ability to read construction drawings, and adherence to safety protocols on active job sites. Supervisory Responsibilities: None Duties/Responsibilities: Set concrete forms and ensure proper alignment, depth, and pitch. Pour, level, and smooth concrete using rakes, screeds, and trowels. Apply curing compounds, waterproofing, and surface hardeners. Use hand and power tools such as floats, troweling machines, and edgers to achieve the desired finish. Create decorative textures, patterns, or colors as required (e.g., broom, exposed aggregate, stamped). Cut joints into concrete to help control cracking. Repair damaged concrete surfaces and perform patchwork. Interpret blueprints and technical drawings to determine material and layout requirements. Maintain a clean and safe work environment and comply with all OSHA safety guidelines. Required Skills/Abilities: Proficiency in using finishing tools and equipment. Ability to work independently with minimal supervision. Excellent attention to detail and quality control. Ability to interpret and follow technical plans and specifications. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Education and Experience: High school diploma or equivalent required. Minimum of 3-5 years of experience in concrete finishing. Journeyman certification or equivalent work experience strongly preferred. Familiarity with OSHA safety standards and procedures. Physical Requirements: Must be able to stand, kneel, and walk for extended periods. Must be able to lift 50-75 pounds regularly. Must be able to work outdoors in a variety of conditions, including extreme heat, cold, wind, and rain. Must be comfortable working at heights and on uneven terrain. Requires manual dexterity and strength to use tools and materials. CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

POSITIONS AVAILABLE: 2+ PRIMARY FUNCTION: Perform a wide variety of technical and physical duties in the placement and finishing of concrete curb, slabs, and structures. May operate machinery, hand and power tools of all types: saws, air hammers, tampers, cement mixers, floats and trowels, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces and forms, as well clean up debris and work area. ESSENTIAL DUTIES: Concrete Finishers Operate a variety of complex equipment including trucks, backhoes, air compressors, hydro hammers, jackhammers, vibrators, brooms, pumps, loaders, concrete saws and mixers, hammer drills, generators and other similar equipment and machinery in repairing and installing concrete. Assist with preparation of concrete base including setting wood forms and positioning steel; measure and pour concrete; finish concrete; remove wooden forms and backfill; clean site; spread loam. Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. Clean and prepare construction sites to eliminate possible hazards. Control traffic passing near, in, and around work zones. Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine. Wet concrete surface and rub with stone to smooth surface and obtain specified finish. Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel. Perform necessary work while complying with all company policies and procedures. Perform additional duties as required or directed by their immediate supervisor or other manager. Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. MINIMUM REQUIREMENTS: Education: High school diploma or GED preferred, but not required Work Experience: Minimum of 3 plus years' experience preferred as a concrete finisher. Previous bridge construction experience a plus. Forming and pouring concrete foundations, walls and slabs. Previous carpentry experience a plus. Must be a minimum of 21 years old. Candidate must have a good work ethic and work as a team player. Must be able to work nights, weekends or overtime as needed. Overnight travel will be required for Asheville, NC job. Meet departmental grooming and performance standards and have a regular and predictable attendance. Other: Must have a valid driver's license with a good MVR. Candidate must have reliable transportation to the job site. Must not be frighten of heights or working near or over water. Heavy physical demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

POSITIONS AVAILABLE: 2+ PRIMARY FUNCTION: Perform a wide variety of technical and physical duties in the placement and finishing of concrete curb, slabs, and structures. May operate machinery, hand and power tools of all types: saws, air hammers, tampers, cement mixers, floats and trowels, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces and forms, as well clean up debris and work area. ESSENTIAL DUTIES: Concrete Finishers * Operate a variety of complex equipment including trucks, backhoes, air compressors, hydro hammers, jackhammers, vibrators, brooms, pumps, loaders, concrete saws and mixers, hammer drills, generators and other similar equipment and machinery in repairing and installing concrete. * Assist with preparation of concrete base including setting wood forms and positioning steel; measure and pour concrete; finish concrete; remove wooden forms and backfill; clean site; spread loam. * Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. * Clean and prepare construction sites to eliminate possible hazards. * Control traffic passing near, in, and around work zones. * Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine. * Wet concrete surface and rub with stone to smooth surface and obtain specified finish. Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth, using trowel. * Perform necessary work while complying with all company policies and procedures. * Perform additional duties as required or directed by their immediate supervisor or other manager. * Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. MINIMUM REQUIREMENTS: Education: * High school diploma or GED preferred, but not required Work Experience: * Minimum of 3 plus years' experience preferred as a concrete finisher. * Previous bridge construction experience a plus. Forming and pouring concrete foundations, walls and slabs. * Previous carpentry experience a plus. * Must be a minimum of 21 years old. * Candidate must have a good work ethic and work as a team player. * Must be able to work nights, weekends or overtime as needed. * Overnight travel will be required for Asheville, NC job. * Meet departmental grooming and performance standards and have a regular and predictable attendance. Other: * Must have a valid driver's license with a good MVR. * Candidate must have reliable transportation to the job site. * Must not be frighten of heights or working near or over water. Heavy physical demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Role and Responsibilities Lay and install bricks, blocks, stone, and other masonry materials according to blueprints, drawings, and project specifications. Prepare and clean surfaces, ensuring proper bonding materials and techniques are used for all installations. Measure and cut materials to fit project requirements, ensuring precision and accuracy in all aspects of the work. Mix and apply mortar, grout, and other bonding agents to secure masonry materials in place. Work with a variety of masonry materials, including brick, stone, concrete blocks, and cultured stone, ensuring correct installation and finishing. Ensure that all work complies with safety codes, building codes, and project specifications. Repair and maintain masonry structures, including patching, re-pointing, and replacing damaged materials. Assist in the installation of decorative masonry elements, such as arches, columns, and veneers. Follow safety procedures and guidelines to maintain a safe work environment. Work alongside other trades and contractors to ensure the timely and successful completion of projects. Maintain and care for tools and equipment, ensuring they are in good working order. Maintain a clean and organized work area, disposing of waste materials properly. Keep track of materials used and report inventory needs to supervisors. Perform other duties as required by the foreman or project manager. Qualifications and Education Requirements Completion of an apprenticeship or journeyman program in bricklaying or masonry. 5+ years of experience as a bricklayer or mason in a construction environment. Strong knowledge of masonry techniques, tools, and materials. Ability to read and interpret blueprints, sketches, and project specifications. Proficiency in measuring, cutting, and laying masonry materials with precision. Knowledge of building codes, safety regulations, and best practices in bricklaying. Ability to work independently or as part of a team to complete projects efficiently and on time. Strong attention to detail and quality craftsmanship. Physical stamina to perform heavy lifting, bending, and working in various weather conditions. Excellent problem-solving skills and the ability to troubleshoot on-site issues. Valid driver's license and reliable transportation. Preferred Skills: Certification or additional training in masonry or construction safety (e.g., OSHA). Experience with specialized masonry techniques or decorative bricklaying. Familiarity with construction management software or tools. Physical Requirements Work is primarily performed on construction job sites, exposed to outdoor elements and varying weather conditions. Some physical labor is required, including lifting and carrying materials, as well as climbing and working at heights. Personal protective equipment (PPE) must be worn at all times. The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses/spoggles, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Plant Services, Inc. is on an “at-will” basis. There is no contract of employment between Thorpe Plant Services, Inc. and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Role and Responsibilities Lay and install bricks, blocks, stone, and other masonry materials according to blueprints, drawings, and project specifications. Prepare and clean surfaces, ensuring proper bonding materials and techniques are used for all installations. Measure and cut materials to fit project requirements, ensuring precision and accuracy in all aspects of the work. Mix and apply mortar, grout, and other bonding agents to secure masonry materials in place. Work with a variety of masonry materials, including brick, stone, concrete blocks, and cultured stone, ensuring correct installation and finishing. Ensure that all work complies with safety codes, building codes, and project specifications. Repair and maintain masonry structures, including patching, re-pointing, and replacing damaged materials. Assist in the installation of decorative masonry elements, such as arches, columns, and veneers. Follow safety procedures and guidelines to maintain a safe work environment. Work alongside other trades and contractors to ensure the timely and successful completion of projects. Maintain and care for tools and equipment, ensuring they are in good working order. Maintain a clean and organized work area, disposing of waste materials properly. Keep track of materials used and report inventory needs to supervisors. Perform other duties as required by the foreman or project manager. Qualifications and Education Requirements Completion of an apprenticeship or journeyman program in bricklaying or masonry. 5+ years of experience as a bricklayer or mason in a construction environment. Strong knowledge of masonry techniques, tools, and materials. Ability to read and interpret blueprints, sketches, and project specifications. Proficiency in measuring, cutting, and laying masonry materials with precision. Knowledge of building codes, safety regulations, and best practices in bricklaying. Ability to work independently or as part of a team to complete projects efficiently and on time. Strong attention to detail and quality craftsmanship. Physical stamina to perform heavy lifting, bending, and working in various weather conditions. Excellent problem-solving skills and the ability to troubleshoot on-site issues. Valid driver's license and reliable transportation. Preferred Skills: Certification or additional training in masonry or construction safety (e.g., OSHA). Experience with specialized masonry techniques or decorative bricklaying. Familiarity with construction management software or tools. Physical Requirements Work is primarily performed on construction job sites, exposed to outdoor elements and varying weather conditions. Some physical labor is required, including lifting and carrying materials, as well as climbing and working at heights. Personal protective equipment (PPE) must be worn at all times. The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses/spoggles, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Plant Services, Inc. is on an “at-will” basis. There is no contract of employment between Thorpe Plant Services, Inc. and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.