Brooksource jobs in Saint Louis, MO

Full Job Description below, but this role will focus mainly on data entry and verifying information on digital copies of checks are manually entered into the system. Candidate could help in the other area listed below. Perform data entry to log digital check data such as deposit amount, name verification, date, etc into the respective query on the screen. Sort bulk mail deliveries to determine which staging area that the mail will be held in Wholesale group (less volume, higher amount on checks): Candidate will open incoming mail that comes into the location lockbox. Perform 10key data entry to reflect deposit amount into the respective account Retail group (higher volume, lower amount on checks): Use automated mail opening machines to open envelopes Skills & Qualifications What You'll Bring: REQUIRING PREVIOUS 10-KEY DATA ENTRY EXPERIENCE (PREFERABLY IN A FINANCIAL SERVICES ENVIRONMENT) Knowledge of: - Strong oral and written communication skills - Regulations, policies, and procedures - Strong attention to detail in composing, typing and proofing materials, establishing priorities and meetings deadlines Ability to: - Strong oral and written communication skills - Regulations, policies, and procedures - Strong attention to detail in composing, typing and proofing materials, establishing priorities and meetings deadlines Education and Training: - Requires High School diploma or equivalent. - 1 year previous retail banking or lockbox experience preferred. - Requires knowledge of Microsoft Office. Job Type & Location This is a Contract to Hire position based out of Creve Coeur, MO. Pay and Benefits The pay range for this position is $18.50 - $18.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Creve Coeur,MO. Application Deadline This position is anticipated to close on Dec 19, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Summary: We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: - Pull and terminate low voltage cable. - Installing network equipment within commercial settings. - Follow instructions and code when pulling cable. - Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. - Ensuring all cables are neatly tied and bundled according to safety regulations. - Installing of cable support structures such as j-hooks, cable racks, and inner duct. - Conduct tests to ensure all newly installed cable systems and component devices are operational. - Troubleshoot issues with the cable network. - Perform any other duties not specifically stated herein, but which your supervisor may assign. - Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. - Perform any other duties not specifically stated herein, but which your supervisor may assign. Skills low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting Top Skills Details low voltage,installation,wap,install,cctv,cable,cat5,cat6 Additional Skills & Qualifications Requirements: - Experience as a Data Cable Technician. - Available for extensive travel nationwide. - Ability to prioritize tasks. - Able to lift and carry 50 pounds or more multiple times per shift. - Ability to work in cramped spaces. - Hours of project 7 pm - 7 am 5 days a week. - Ability and willingness to travel to Lowell, AR for new hire orientation. - 100% travel of the USA - Ability to operate a scissor lift; and ability to work at heights. - Able to fill out the work order and take care of the tools provided by the office to do the job. - Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. - Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. - Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: - Per-Diem paid $125 a day for food and lodging. - Company vehicle provided (traveling with a partner) Experience Level Intermediate Level Job Type & Location This is a Contract position based out of St. Louis, MO. Pay and Benefits The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in St. Louis,MO. Application Deadline This position is anticipated to close on Dec 22, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

The Customer Experience Specialist I, is an entry level customer service role, operating in a call center environment and supporting Consumer Direct Lending. The individual acts as the primary consumer contact to guide a consumer through the loan origination process after the licensed discussion with a loan officer. The individual is a key contributor to facilitating efficient and effective processes that support business and customer service objectives. Responsibilities may be limited within a specific function/channel or across functions/channels within the Mortgage Fulfillment Division (MFD). Operate in a Call Center environment as a customer success advocate Receive inbound calls and make outbound calls to consumers Receive inbound text messages (where the consumer has provided express consent) and facilitate outbound text messages to consumers Answer high-volume, inbound calls or texts from current customers in a timely manner. Provide exceptional customer service to all customers' mortgage loan inquiries/requests. Effectively manage a pipeline of up to 75 loans - currently 60 loans per week (12 loans per day) - contractors will by the main POC for the customer from loan origination to loan closing, so they could be handling multiple calls a day for the same loan - 30 calls per day currently Performing routine data entry and validation tasks Handling routine calls, emails and/or chat responses with internal employees, consumers &/or authorized 3rd parties Monitoring work queues and intervening as needed Interacting with multiple departments to expedite processing and/or issue resolution Conduct preliminary or basic research in order to accurately resolve and respond to customer inquiries. Must request assistance for escalated and/or more complex issues to department senior associates or supervisors. Meet outlined production and quality standards. Follow established Policy and Procedures Performing other related duties as required and assigned Demonstrating behaviors which are aligned with the organization's desired culture and values Skills Customer service, call center Top Skills Details Customer service,call center Additional Skills & Qualifications An ideal candidate would be one looking to build a career with a key player in the mortgage industry and would have the exhibit the below qualifications: - Minimum or 1 year of experience in the mortgage industry - Must be a team player with strong attention to detail and able to work independently - Strong phone presence / Customer Service presence - Excellent critical thinking, problem solving, mathematical skills and sound judgment - Effective time management skills to deliver work on time - Capable communicator, written and oral - Demonstrated proficiency with computers and mainstream computer applications (Microsoft, Google, etc.) - Assessment score above 50. #priorityeast Job Type & Location This is a Contract to Hire position based out of Saint Louis, MO. Pay and Benefits The pay range for this position is $23.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saint Louis,MO. Application Deadline This position is anticipated to close on Dec 17, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Software Engineer Hourly rate: $68.00 - $73.00 Contractor benefits: Medical, Vision, Dental, 401k This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Position Responsibilities: * Assists with the development and documentation of electronic and electrical system requirements. * Develops or modifies basic hardware and software designs based on defined requirements. * Performs system tests to verify operational and functional requirements. * Supports fabrication technicians and suppliers' questions during build and fabrication process * Supports resolution of product integration issues and production anomalies. * Supports hands-on troubleshooting of test racks * Perform acceptance test procedures to demonstrate conformance to design and document results * Develop and maintain scripts used to run test functions using C and C++ * Researches basic technologies for potential application to company business needs * Potential for infrequent travel domestic or abroad * This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. * An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): * Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. * 2+ years of work-related experience with a Bachelors OR Masters Degree Preferred Qualifications (Desired Skills/Experience): * Strong problem-solving and debugging skills * Experience with laboratory test equipment (oscilloscopes, logic analyzers, etc.) * Excellent written and verbal communication skills * Strong foundation in C, C++, and python * Siemens Capital Experience Must be U.S. Person for purposes of Export Compliance. EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.

Lead AI Engineer Contract to Hire Hybrid (St. Louis or Atlanta) *Must be a USC or GC holder* Our client is looking for someone to come in to be the driving force behind their technical vision and execution as the Lead AI Engineer. If you have experience in Generative AI and deploying AI agents to production environments you should apply! Responsibilities: Implement Sophisticated AI Agents: Design, build, and deploy complex AI agents using LangChain and LangGraph. You will own the core logic that automates intricate decision-making within the claims lifecycle. Master Prompt & Context Engineering: Design, test, and refine complex prompts and contextual data frameworks to ensure our AI agents perform with maximum accuracy, efficiency, and reliability. Lead AI Research & Innovation: Stay at the bleeding edge of AI. You'll be responsible for identifying, prototyping, and integrating the latest foundational models, RAG techniques, and agentic frameworks to solve unique business challenges. Build for Production Scale on GCP: Engineer and operate our AI systems in a scalable, reliable production environment on Google Cloud Platform. Your work will directly impact millions of users. Champion MLOps for Agentic Systems: Establish and lead best practices for the reliability, versioning, monitoring, and observability of our AI agents, using tools like Langfuse to ensure production-grade performance. Requirements: Bachelor's degree or equivalent experience 7+ years in software engineering, with a strong track record of technical leadership and shipping complex, scalable systems. Experience in a dedicated AI/ML role, with hands-on experience in model integration, MLOps, and applying AI to solve business problems. Direct experience architecting and building solutions with LangChain, LangGraph, or similar agentic AI frameworks. In-depth experience with Google Cloud Platform (GCP), specifically its AI/ML services (Vertex AI, etc.). 3+ years of proven experience leveraging Kubernetes workloads. Proficiency in Python, JavaScript/TypeScript and/or Java and working knowledge of a modern front-end framework (Angular, React, or Vue) to collaborate effectively with UI teams. Hands-on experience with LLM observability tools like Langfuse for monitoring and debugging agentic workflows. Cloud-Native Proficiency: Cloud Platforms: Extensive hands-on experience with at least one major cloud provider (AWS, Google Cloud, or Azure). Containerization: Mastery of Docker for containerizing applications and Kubernetes for orchestration. Infrastructure as Code (IaC): Proficiency with tools like Terraform or CloudFormation to manage infrastructure programmatically. CI/CD Tools: Experience with CI/CD tools such as Github Actions, Argo CD, Jenkins Database Knowledge: Strong experience with both SQL (e.g., Spanned DB, Alloy DB, PostgreSQL, MySQL) and NoSQL (e.g., MongoDB, DynamoDB and Firestore) databases. Cloud-Native Proficiency: Cloud Platforms: Extensive hands-on experience with at least one major cloud provider (AWS, Google Cloud, or Azure). Containerization: Mastery of Docker for containerizing applications and Kubernetes for orchestration. Infrastructure as Code (IaC): Proficiency with tools like Terraform or CloudFormation to manage infrastructure programmatically. CI/CD Tools: Experience with CI/CD tools such as Github Actions, Argo CD, Jenkins Database Knowledge: Strong experience with both SQL (e.g., Spanned DB, Alloy DB, PostgreSQL, MySQL) and NoSQL (e.g., MongoDB, DynamoDB and Firestore) databases.

**Our team in St.Louis is looking to add to our sales team!** and TEKsystems Global Services** We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. **Benefits of Joining Our Team:** + Growth potential within the organization including a defined career path for sales professionals + Thorough sales training within the IT Talent Solutions and Services industry that includes working closely with an assigned Account Manager Lead as a Mentor + Dynamic and diverse culture within a strong team environment + Opportunities for continued education and education assistance + Unlimited earning potential, including a competitive base salary and uncapped commission structure **Responsibilities** **Essential Functions:** The Sales Development Rep-2 (SDR-2) is responsible for executing on initial steps associated with the sales process. After successful completion of an extensive 10- week hands on training that includes online learning, business role plays and real time sales scenarios, the SDR will: - Research and build call sheets of targeted customers in the market by leveraging tools like Linked In and resources including Candidates and current Consultants - Document, track and research all leads coming in from Recruiter Lead Program - Build overall customer profiles based on information learned and talk tracks for each customer by using tools like Seismic and Gong - Perform outreach to targeted customer list and document weekly activity - Partner with Director of Business Operations on using the Inward Lens tool to identify lost customers in order to build call sheets to generate new meetings. Success in the SDR-2 Role will lead to promotion to Account Manager where additional responsibilities will include: - Develop and manage new and existing customer relationships by leveraging resources including but not limited to Salesforce and Hoovers - Increase sales and market share through assigned and newly generated accounts - Contact and meet with prospective customers to establish customer needs, hiring cycles, and build a customer intimate relationship - Prepare and present sales information and effective proposals for customers - Partner with Delivery team in identifying top IT Talent to fulfill client needs **Qualifications** **Educational & Experience Requirements:** + Bachelor's Degree OR Military experience OR Associates Degree with 3 years of professional experience OR 4 years of professional experience + Minimum of 1 year of Sales Experience OR Degree in Sales OR Sales Internship Experience OR Active membership in a Collegiate Sales Club/ Organization + A strong desire for a career in B2B Sales + Excellent written and oral communication skills which can be leveraged in areas of negotiations + A sense of urgency, excellent presentation skills and a high standard of professionalism and character are musts + The ability to overcome obstacles without becoming discouraged and readily collaborate with others to accomplish goals + A strong propensity to learn is necessary **Salary:** $60,000 + (COLA where applicable) + weekly commission + performance-based bonuses (quarterly and annually). Once promoted to an Account Manager, you will be eligible for monthly car and cell phone allowance. 10-week training compensation: $21 per hour and eligible for overtime + COLA where applicable Employees also receive a benefits package including a 401(k) company matched retirement savings plan, paid time off and holiday pay. See link below ********************************************** **We are an equal opportunity employers and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law.** **Job Locations** _US-MO-Creve Coeur_ **Job ID** _2025-12846_ TEKsystems is a equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law.

Gathers and supports the evaluation of technical data for specific projects requiring manufacturing engineering practices. Participates or manages projects using approved project management techniques. Initiates changes to supporting processes and related documentation. Provides low-level training on procedures and processes related to engineering and production. Assists in the development of production proposal activities. Provides technical and administrative assistance to meet regulatory, production and process requirements. Communicates with internal stakeholders to ensure products and services compliance. Works under general supervision. Position Responsibilities: Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans. Resolves technical problems and assists in the implementation of new engineering principles, theories, advance technologies and concepts. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience Interacts with engineers and engineering requirements Integrates electrical designs within electrical/mechanical designs using NX software Basic Qualifications: High School Diploma or Equivalent 1+ years working in production environment or supporting production Experience with manufacturing and/or mechanical design and/or electrical design Preferred Qualifications: 2+ years working in production environment or supporting production 2+ years Experience with manufacturing and/or mechanical design and/or 2+ electrical design Experience with integration Must be U.S. Person for purposes of Export Compliance. EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law. #MWL

Are you passionate about solving problems and helping people? Join our team as a Customer Service Representative, where you'll be the first point of contact for our customers. You'll assist with billing inquiries, process payments, provide portal navigation support, and handle general questions-all while delivering exceptional service. Key Responsibilities + Respond to customer inquiries via phone, email, and chat regarding billing, payments, and account navigation. + Deliver accurate information and outstanding service in a fast-paced, high-volume contact center environment. + Take ownership of customer requests and resolve issues efficiently and professionally. + Analyze information to make sound decisions and provide effective solutions. + Perform basic math calculations (percentages, addition, subtraction, division) to address billing concerns. + Navigate multiple systems to research and resolve customer issues. + Maintain productivity, quality, and service standards. + Adhere to corporate policies, regulatory standards (SOX), and security protocols (PCI). + Complete additional tasks and projects as assigned. + Work overtime when required. Qualifications + Education: High school diploma or equivalent required; college coursework or degree is a plus. + Experience: + 1-2 years of customer service experience preferred. + Experience in a high-volume contact center is a plus. + Skills: + Strong verbal and written communication skills. + Ability to make quick, sound decisions in a fast-paced environment. + Proficient in computer applications, including Microsoft 365 (Excel, Word, Outlook, Teams). + Skilled in multitasking and navigating multiple screens. + Professional, reliable, and accountable with a strong sense of ownership. + Ability to manage competing priorities and remain calm under pressure. Why Join Us? + Opportunity to grow in a dynamic and supportive environment. + Training and development programs to enhance your skills. + Be part of a team that values customer satisfaction and excellence. Job Type & Location This is a Contract to Hire position based out of O Fallon, MO. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in O Fallon,MO. Application Deadline This position is anticipated to close on Dec 17, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Power Up Your Career - Join a Data Center Team Driving the Future! Ready to be at the heart of technology innovation? Step into a role where every day brings new challenges, cutting-edge hardware, and the chance to make a real impact. We're searching for passionate Data Center Technicians to join a fast-moving team tackling large-scale GPU deployments and next-gen networking projects. Why This Role Rocks: + High-Voltage Impact: You'll be hands-on with the latest servers, GPUs, and fiber optics-building the backbone of tomorrow's digital world. + Epic Projects: Dive into complex deployments, troubleshoot mission-critical systems, and help launch tech that powers global operations. + Team Energy: Collaborate with driven experts who thrive on solving problems and pushing boundaries. + Growth Unleashed: Lead, learn, and level up your skills in an environment that rewards initiative and innovation. What You'll Tackle: + Diagnose and resolve server, GPU, and network issues-fast. + Deploy, rack, stack, and cable hardware with precision and speed. + Team up to keep operations seamless and projects on track. + Own support tickets and document wins using digital tools. + Mentor teammates and drive project success. + Work with the coolest tech in a large-scale data center. What You Bring: + 3+ years of hands-on data center experience (break/fix, deployment, troubleshooting). + GPU deployment experience? That's a huge plus! + Mastery of hardware installation, cabling (Cat5, Cat6, fiber), and network troubleshooting. + Leadership chops and a drive to manage complex projects. + Stellar communication and documentation skills. + Flexibility for day or night shifts-and a readiness to travel when needed. Shifts That Fit Your Life: + Multiple day and night options-find your groove! Location & Pay: + Mount Pleasant, WI + Competitive pay range of $30/hr to $49.50/hr Ready to supercharge your career and work on projects that matter? Apply now and join a team that's shaping the future of technology! #DC25 Job Type & Location This is a Contract position based out of Saint Louis, MO. Pay and Benefits The pay range for this position is $30.00 - $44.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Saint Louis,MO. Application Deadline This position is anticipated to close on Dec 25, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Electrical Components Engineer Hourly rate: $85.00 - $88.00 Contractor benefits: Medical, Vision, Dental, 401k This position requires an active US Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.) Electrical Component Engineering Standards and Processes: * Applies engineering knowledge of electrical, electronic, and electro-mechanical components in evaluation of components for assembly and subassembly repair/design * Directly supports Sub-contractors and Suppliers to ensure their electronic components are qualified for company usage per the contract and the Parts Management Plan * Significant experience with a harsh environment/high reliability design environment, including previous aerospace, medical device, automotive, or industrial design/application experience. * Experience with connectors, wires, and cables, including the fabrication of cables/bundles, installation of cables/harnesses, etc. Qualifications: * Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience(e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. * Electrical design and/or Test experience with electrical components, wiring harnesses, connectors and cables. * Specific experience in any military aerospace discipline, either as a defense contractor or as former military, especially in the area of Electrical Wiring Interconnection Systems (EWIS) * Specific experience with military electronics. Not necessarily aerospace, as long as its directly related to one of our electrical disciplines (i.e. components, wire/cables, processes, etc.) * Specific and extensive experience with the electrical mil specs and aerospace industry specs that are relevant to our day to day. * Deep experience/insight with wiring design, cables, connectors, etc. Someone who worked in a position where this was a key element of their primary responsibilities for 5+ years. * Understanding of Aircraft and Weapons design/requirements to recommend the correct Alternate electrical components for new product development and legacy programs Nice to Have: * Uses Project Management tools to meet cost, schedule, and technical performance requirements * Incorporates Environmental Health and Safety (EHS), LEAN and Quality principles into (1) materials and processes, (2) research and qualification, (3) work procedures and (4) lab testing and qualification * Supports, establishes work statements, defines strategies, and/or provides consultation with peers while keeping management informed * Significant experience with military and/or industry specifications. Must be U.S. Person for purposes of Export Compliance. EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.

Perform 10-Key data entry to log digital check data such as deposit amount, name verification, date, etc into the respective query on the screen. Sort bulk mail deliveries to determine which staging area that the mail will be held in. Wholesale group (less volume, higher amount on checks): Candidate will open incoming mail that comes into the location lockbox. Retail group (higher volume, lower amount on checks): Use automated mail opening machines to open envelopes Top Skills Details 10 key data entry Lockbox experience #priorityeast Job Type & Location This is a Contract to Hire position based out of Creve Coeur, MO. Pay and Benefits The pay range for this position is $18.50 - $18.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Creve Coeur,MO. Application Deadline This position is anticipated to close on Dec 19, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Top Skills' Details 1. Technical Experience (Computer Science or Engineering Experience) 2. Technical Project Management Experience (At least 2 years of this) 3. Strong communication and organization skills Description + Coordinate with hardware delivery schedules and installation teams + Develop and manage project plans, timelines, and deliverables + Serve as the main liaison between site teams and the central manager + Support onboarding of Software Engineers in early 2026 + Ensure smooth deployment of software and hardware solutions + Maintain documentation and provide regular status updates Additional Skills & Qualifications + 5+ years of experience in technical project management + Experience transitioning from technical roles (e.g., coding) to functional PM roles + Strong communication and stakeholder management skills + Experience in manufacturing or plant environments preferred + Familiarity with hardware/software deployment projects is a plus + PMP or other formal PM certifications are beneficial Job Type & Location This is a Contract position based out of Wentzville, MO. Pay and Benefits The pay range for this position is $45.00 - $58.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Wentzville,MO. Application Deadline This position is anticipated to close on Dec 23, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Requirements Candidates are required to be in Lowell, Arkansas January 1st to start the position. Candidates are responsible for the first week of pay for food and lodging. After first week candidates will be compensated a per diem weekly. Description We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Benefits: + Per-Diem paid $125 a day for food and lodging. + Company vehicle provided (traveling with a partner) + 70 hour weeks (30 hours overtime) Responsibilities: - Pull and terminate low voltage cable. - Installing network equipment within commercial settings. - Follow instructions and code when pulling cable. - Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. - Ensuring all cables are neatly tied and bundled according to safety regulations. - Installing of cable support structures such as j-hooks, cable racks, and inner duct. - Conduct tests to ensure all newly installed cable systems and component devices are operational. - Troubleshoot issues with the cable network. - Perform any other duties not specifically stated herein, but which your supervisor may assign. - Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. - Perform any other duties not specifically stated herein, but which your supervisor may assign. Skills low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting Top Skills Details low voltage,installation,wap,install,cctv,cable,cat5,cat6 Additional Skills & Qualifications Requirements: - Experience as a Data Cable Technician. - Available for extensive travel nationwide. - Ability to prioritize tasks. - Able to lift and carry 50 pounds or more multiple times per shift. - Ability to work in cramped spaces. - Hours of project 7 pm - 7 am 5 days a week. - Ability and willingness to travel to Lowell, AR for new hire orientation. - 100% travel of the USA - Ability to operate a scissor lift; and ability to work at heights. - Able to fill out the work order and take care of the tools provided by the office to do the job. - Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. - Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. - Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Experience Level Intermediate Level Job Type & Location This is a Contract position based out of St. Louis, MO. Pay and Benefits The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in St. Louis,MO. Application Deadline This position is anticipated to close on Dec 17, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Software Engineer Hourly rate: $56.00 - $61.00 Contractor benefits: Medical, Vision, Dental, 401k This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Position Responsibilities: * Assists with the development and documentation of electronic and electrical system requirements. * Develops or modifies basic hardware and software designs based on defined requirements. * Performs system tests to verify operational and functional requirements. * Supports fabrication technicians and suppliers' questions during build and fabrication process * Supports resolution of product integration issues and production anomalies. * Supports hands-on troubleshooting of test racks * Perform acceptance test procedures to demonstrate conformance to design and document results * Develop and maintain scripts used to run test functions using C and C++ * Researches basic technologies for potential application to company business needs * Potential for infrequent travel domestic or abroad * This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. * An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): * Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. * 2+ years of work-related experience with a Bachelors OR Masters Degree Preferred Qualifications (Desired Skills/Experience): * Strong problem-solving and debugging skills * Experience with laboratory test equipment (oscilloscopes, logic analyzers, etc.) * Excellent written and verbal communication skills * Strong foundation in C, C++, and python * Siemens Capital Experience Must be U.S. Person for purposes of Export Compliance. EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.

About the Role We are seeking a detail-oriented Lockbox Data Entry Specialist to join our team. This position primarily focuses on accurate data entry and verification of digital check information within the Busey system. You will play a key role in ensuring financial data integrity while supporting additional operational tasks as needed. What You'll Do + Enter and verify digital check details (deposit amount, name, date, etc.) into the system with precision. + Sort and stage bulk mail deliveries for processing. + Wholesale Group (Lower Volume, Higher Dollar Amount): + Open incoming lockbox mail and perform 10-key data entry for deposits. + Retail Group (Higher Volume, Lower Dollar Amount): + Operate automated mail-opening machines for high-volume processing. What You'll Bring + Required: Previous 10-key data entry experience, ideally in a financial services environment. + Strong attention to detail and accuracy in data entry. + Ability to prioritize tasks and meet deadlines in a fast-paced setting. + Excellent oral and written communication skills. + Familiarity with Microsoft Office applications. Preferred Qualifications + 1 year of retail banking or lockbox experience. + Knowledge of financial regulations, policies, and procedures. Education + High School diploma or equivalent required. Skills + Data Entry + 10-Key Proficiency + Organizational Skills + Time Management Job Type & Location This is a Contract to Hire position based out of Creve Coeur, MO. Pay and Benefits The pay range for this position is $18.50 - $18.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Creve Coeur,MO. Application Deadline This position is anticipated to close on Dec 25, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Electrical Components Engineer Hourly rate: $85.00 - $88.00 Contractor benefits: Medical, Vision, Dental, 401k This position requires an active US Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.) Electrical Component Engineering Standards and Processes: • Applies engineering knowledge of electrical, electronic, and electro-mechanical components in evaluation of components for assembly and subassembly repair/design • Directly supports Sub-contractors and Suppliers to ensure their electronic components are qualified for company usage per the contract and the Parts Management Plan • Significant experience with a harsh environment/high reliability design environment, including previous aerospace, medical device, automotive, or industrial design/application experience. • Experience with connectors, wires, and cables, including the fabrication of cables/bundles, installation of cables/harnesses, etc. Qualifications: • Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience(e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. • Electrical design and/or Test experience with electrical components, wiring harnesses, connectors and cables. • Specific experience in any military aerospace discipline, either as a defense contractor or as former military, especially in the area of Electrical Wiring Interconnection Systems (EWIS) • Specific experience with military electronics. Not necessarily aerospace, as long as its directly related to one of our electrical disciplines (i.e. components, wire/cables, processes, etc.) • Specific and extensive experience with the electrical mil specs and aerospace industry specs that are relevant to our day to day. • Deep experience/insight with wiring design, cables, connectors, etc. Someone who worked in a position where this was a key element of their primary responsibilities for 5+ years. • Understanding of Aircraft and Weapons design/requirements to recommend the correct Alternate electrical components for new product development and legacy programs Nice to Have: • Uses Project Management tools to meet cost, schedule, and technical performance requirements • Incorporates Environmental Health and Safety (EHS), LEAN and Quality principles into (1) materials and processes, (2) research and qualification, (3) work procedures and (4) lab testing and qualification • Supports, establishes work statements, defines strategies, and/or provides consultation with peers while keeping management informed • Significant experience with military and/or industry specifications. Must be U.S. Person for purposes of Export Compliance. EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.

Summary: We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 - 8 months at a time. We are seeking a self-starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. Responsibilities: - Pull and terminate low voltage cable. - Installing network equipment within commercial settings. - Follow instructions and code when pulling cable. - Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work. - Ensuring all cables are neatly tied and bundled according to safety regulations. - Installing of cable support structures such as j-hooks, cable racks, and inner duct. - Conduct tests to ensure all newly installed cable systems and component devices are operational. - Troubleshoot issues with the cable network. - Perform any other duties not specifically stated herein, but which your supervisor may assign. - Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA. - Perform any other duties not specifically stated herein, but which your supervisor may assign. Skills low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting Top Skills Details low voltage,installation,wap,install,cctv,cable,cat5,cat6 Additional Skills & Qualifications Requirements: - Experience as a Data Cable Technician. - Available for extensive travel nationwide. - Ability to prioritize tasks. - Able to lift and carry 50 pounds or more multiple times per shift. - Ability to work in cramped spaces. - Hours of project 7 pm - 7 am 5 days a week. - Ability and willingness to travel to Lowell, AR for new hire orientation. - 100% travel of the USA - Ability to operate a scissor lift; and ability to work at heights. - Able to fill out the work order and take care of the tools provided by the office to do the job. - Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel-toed boots. - Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers. - Valid driver's license with a clean driving record; no DUI or DWI in the last three years. Benefits: - Per-Diem paid $125 a day for food and lodging. - Company vehicle provided (traveling with a partner) Experience Level Intermediate Level Job Type & Location This is a Contract position based out of St. Louis, MO. Pay and Benefits The pay range for this position is $19.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in St. Louis,MO. Application Deadline This position is anticipated to close on Dec 19, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Schedule: Monday-Friday | 7:00 AM - 3:30 PM | Business Casual Dress Pay: $18.50 per hour Contract Duration: 6 Months (Potential for Permanent Hire) About the Role We are seeking a Lockbox Data Entry Processor to join our team! This position is ideal for detail-oriented individuals who thrive in a structured environment and enjoy working independently. You will primarily focus on data entry and verification of digital check information while supporting other lockbox operations as needed. Key Responsibilities + Perform 10-key data entry to accurately log check details such as deposit amounts, names, and dates into the system. + Sort and stage bulk mail deliveries for processing. + Open incoming mail manually or using automated machines, depending on volume. + Verify and process deposits for wholesale (high-value, low-volume) and retail (low-value, high-volume) groups. + Maintain accuracy and attention to detail while meeting productivity standards. Qualifications + Previous 10-key data entry experience required (preferably in a financial services environment). + High School diploma or equivalent required. + 1+ year of retail banking or lockbox experience preferred. + Proficiency in Microsoft Office and ability to learn new systems quickly. + Strong attention to detail and ability to meet deadlines. Why You'll Love This Role + Opportunity to transition to a permanent position with annual performance-based pay increases. + Newly renovated lockbox area with a comfortable work environment. + Ability to listen to music or podcasts during your shift. + Join a supportive team in a secure and professional banking environment. Apply today and start your career in financial operations! Job Type & Location This is a Contract to Hire position based out of Creve Coeur, MO. Pay and Benefits The pay range for this position is $18.50 - $18.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Creve Coeur,MO. Application Deadline This position is anticipated to close on Dec 25, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Design and Analysis Engineer Hourly rate: $105.00 - $109.00 Contractor benefits: Medical, Vision, Dental, 401k This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Seeking a T-7A Mission Systems Senior Technical Lead Engineer (Level 5) to join the T-7A Mission Systems Team located in Berkeley, MO. As a Technical Lead Engineer on the T-7A Mission Systems Hardware team, your role will support the development, qualification, and production of mission computing, communications, navigation, surveillance, datalink and display avionics. You will be responsible for managing the technical performance of critical suppliers to ensure integration and verification of installed system performance. The T-7A Mission Systems includes new development and off-the-shelf hardware integrated in an advanced laboratory and being verified in flight test. The Mission Systems development activities include hardware requirements decomposition, qualification test, laboratory and aircraft integration, formal verification test, and production support. The T-7A Red Hawk Advanced Pilot Training Program is an exciting, dynamic program that is dedicated to breaking the norm. Position Responsibilities: • Develops and maintains relationships and partnerships with customers, stakeholders, and peers • Provide technical guidance and mentorship to junior engineers, fostering a culture of continuous learning and improvement • Provides oversight and approval of technical approaches, products and processes • Leads work with customers to develop and document electronic and electrical system requirements on complex projects • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met • Manages performance of critical suppliers to ensure system integration and compliance with requirements • Assigns responsibility for activities to team members and ensures technical correctness and consistency of products and services • Leads research into technology advances for potential application to company business needs Required Qualifications: (Required Skills/Experience): • Bachelor of Science degree or higher from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science • 9+ years of systems engineering experience involving: system requirements, functional decomposition and allocation, integrated design, analysis and evaluation, verification • 9+ years of experience with Avionics Hardware & Software development, design, production and project management • 9+ years of experience in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues • 9+ years of experience with Hardware and LRU development, test and qualification. Preferred Qualifications: (Desired Skills/Experience): • 10 or more years' related work experience or an equivalent combination of education and experience • Experience with Advanced Cockpit Displays: Heads Up Display (HUD), Up Front Control Display (UFCD), Large Area Displays (LAD), and mission systems avionics equipment • Active U.S. Secret Security Clearance strongly preferred • Previous experience in the defense or aerospace industry • Experience with commercial and military avionics systems • Experience working with suppliers and supply chain management • Proposal development experience Must be U.S. Person for purposes of Export Compliance. EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law.