Building Controls and Services jobs - 2,616 jobs

Mechanical Service Technician II DEPARTMENT: Operations CLASSIFICATION: Non-exempt General Responsibilities: The Mechanical Service Technician handles job start-up, checkout, and troubleshooting for systems and service installed jobs. This position performs mechanical related duties, including service agreement tasks and handling emergency calls as directed. Reports to: MSD Team Lead Direct reports: None Direction: * Minimal supervision. * Requires self-motivation. * Provides guidance to outside contractors and limited direction to other specialists. MAJOR RESPONSIBILITIES: 60% Performs mechanical system inspections, service, and troubleshooting. * Performs mechanical inspections of boilers, chillers, pumps, etc., * Completes final critical adjustments and calibration on mechanical / control equipment following owners manual instructions. * Informs supervisor of any necessary modifications, changes, or upgrades to mechanical system on basis of own findings during the assignment * Reviews estimated costs and scope on projects and strives to complete scope of work within the estimated costs. * Performs wiring checkout and assists in automation systems start-ups. * Completes and submits written reports covering all aspects of each assignment, including customer, nature of trouble, equipment involved, time and material used, travel, and any other expenses. * Performs service agreement tasks as directed. Handles emergency service calls on-site or on-line as directed. * Responds to customer service calls, checks indicated points of trouble, and analyzes full requirements of system involved and checks and tests systems components. * Diagnoses trouble or defects in sensors, field cabinets, control console, or mechanical systems and determines corrective action. * Disconnects and dismantles instruments as necessary and corrects trouble or defects by adjusting, repairing, or replacing parts or units. * Must be able to recognize safety hazards and understand how to safely overcome them without causing harm to yourself or others. * Understand the safety rules and regulations outlined in the BCS safety manual. 20% Provides customer service by responding to service calls to build and maintain customer relationships. * Always leaves a customer site with a reason to come back by documenting suggestions for repairs and improvements on every service ticket no exceptions. * Presents a professional image of Building Controls and Services when speaking to customers (all levels). 20% Provides technical assistance and training as needed. * Delivers technical support to end users and field labor when applicable. * Trains and develops other Specialists on Systems, equipment, and company policies and procedures. * Trains customers on systems prior to job turnover. QUALIFICATIONS: Education * Associate degree or equivalent from two-year College or technical school or equivalent combination of education and experience. Skills and Experience * Minimum five years of experience in an HVAC capacity. * Minimum five years of experience in a mechanical capacity. * Minimum five years of experience in systems including on-the-job experience as a systems/mechanical specialist. * Exemplifies company core values: Ambitiously Curious, Always Want the Best and Whatever it Takes * Strong knowledge of building automation systems, HVAC, mechanical systems, electrical concepts, and operations. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Excellent oral and written communication skills. * Mathematical abilities to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ration, and percent and create and interpret graphs. * Strong problem-solving ability. * Preventative Maintenance. * Universal Diagnostic. * Parts Changer. * Field Modifications. * Able to lead projects/jobs. * Capable of reading and understanding blueprints. * Unit Startup Knowledge including VAVs. * Split System Knowledge. * VFD Proficient. * RTU Knowledge. * Mini Split Knowledge. * Water Source Heat Pump Knowledge. * Duct System Knowledge. * LG Proficient. * AAON Proficient. * DOAS/MUA Knowledge. * CRAC Knowledge. * Boiler Basic Knowledge. * Chiller Basic Knowledge. Certificates, Licenses, Registrations * Valid driver license * Block journeyman or master mechanical license * EPA universal refrigeration handling certificate Other Requirements * Requires frequent travel through Kansas and the Midwest * Requires occasional overnight stays Training and development: * Completes at minimum, 16 hours of continuing education on an annual basis as required to maintain license.

This role is not open for submissions from outside staffing agencies Plant Manager We are actively seeking a Plant Manager for our New Berlin, WI facility. The Plant Manager will direct and manage plant operations with overall responsibilities for Production, Maintenance, Quality, Safety, Inventory and Cost Control, Logistics, and other production-related activities. We are growing at a tremendous rate which presents a fantastic opportunity to join our company and achieve long-term career goals. WHO YOU ARE: A Change Management Leader, a Team Builder with a focus on Safety, who is Goal Oriented and has a Servant Leadership work style. The Plant Manager is responsible for: Directing and managing plant operations for production, maintenance, quality, and shipping and receiving. Setting production goals, monitoring, and managing all aspects of production. Implementing cost effective systems of control over capital, operating expenditures, workforce, wages, and effective use of labor. Managing capital asset maintenance. Establishing and monitoring overall plant performance for production and quality standards. Controlling and minimizing labor overtime, premium freight, and repair expenses. Maintaining, adjusting, or replacing existing plant facilities and equipment when necessary. Providing leadership and training to accomplish the company goals and objectives. Implementing and maintaining preventative maintenance programs. Incorporating shop floor organization and plant cleanliness processes. Providing direction, development, and leadership to production supervisors. Managing and monitoring branch safety conditions to ensure full OSHA compliance and to reduce the incidence of work-related injury to employees. Communicating regularly with senior management and support functions. SKILLS YOU BRING: 5 years manufacturing experience with minimum 3 years supervisory experience in a GLASS fabrication environment Bachelor's degree or combination of education and experience Business finance acumen and P&L knowledge/experience Background with manufacturing methods, process improvement programs and procedures including Lean manufacturing techniques required Must have excellent follow through and communication skills with the ability to prioritize tasks and manage multiple assignments Production and Capacity Planning Background WHY CHOOSE US: We offer the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. We bear most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you we value you as an employee and how we will help you achieve financial independence. We are one of North America's largest fabricator and distributors in our industry, with many facilities throughout the United States and Canada. With its unmatched product line, we have created a Total System Approach to satisfy virtually any customer requirement. We have the products, equipment, and an experienced team to take projects from design concepts with the architect to final installation by the contractor. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

Coolray Heating and Cooling is an HVAC, Plumbing and Electrical Company in Nashville! We're seeking service-focused HVAC Service Technicians to join our team! BENEFITS WE OFFER Hourly $25 - $33 Plus Commission Weekly Truck Revenue Bonus Program 3% Commission on Equipment Turnovers Paid Time Off (PTO) Health, Vision, and Dental 401K Retirement Plan with company match Life Insurance, Short-Term, and Long-Term Disability Special Program Options: FSA, EAP, Legal Services, and Identity Theft WHY COOLRAY? Coolray is a part of a family of companies have been locally owned and operated since 1966. Our team is comprised of exceptional people who are passionate about their talents and abilities. We challenge and channel team our members' intelligence and ingenuity and provide them with a sense of, purpose & achievement! Qualifications: Do I have What it Takes? 1+ year experience in a residential environment Desire to learn and grow career experience in the HVAC industry Mechanical aptitude Excellent interpersonal and customer service skills with a strong desire to exceed customer expectations Attention to detail Must pass MVR Test, Drug Screening & Background check Responsibilities: What Will I Do? Perform routine maintenance on residential heating and air conditioning systems Operate hand and power tools to inspect repair, and conduct maintenance on furnaces, condensers, and compressors Provide outstanding service through strong communication and customer service skills Educate your customers on their systems and maintenance requirements help customers identify areas to improve their home comfort systems Document services performed and recommendations made by filling in logs and/or records Complete all tasks in accordance with quality and safety standards

AMS Industries, Inc. is a MEP+ contracting firm serving the commercial, industrial, refrigeration and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities. We are seeking a highly organized and detail-oriented Onsite Administrative Assistant to join our construction team. This position reports to the on-site Project Manager. The ideal candidate will be responsible for handling various administrative duties, signing in new hires, help coordinate orientation sessions, and assisting with safety compliance. This role is crucial in ensuring smooth operations and maintaining a safe working environment on the construction site. Responsibilities: Handle correspondence, filing, and documentation. Schedules and coordinates meetings, and appointments. Generates standardized reports as needed. Maintains and updates files, spreadsheets, and logs with current data. Distributes files, and logs as appropriate. Maintains electronic and hard copy filing system. Retrieves documents from the filing system. Communicates with various departments and other third parties to gather and provide information to assemble and prepare reports and documents. Processes entries and statistical information which could include expense reports, timesheets, GL entries, and spreadsheets. Performs general administrative and clerical functions such as copying, printing, scanning, filing, and faxing. Sign in new hires and ensure all necessary paperwork is completed. Verify employment eligibility and ensure all documentation is properly filed. Conduct orientation sessions for new hires, providing them with necessary information about site policies, procedures, and expectations. Coordinate and facilitate safety training sessions, ensuring all personnel are up to date with mandatory safety protocols. Maintain records of all training sessions and certifications. This position has no supervisory responsibilities. Qualifications: High school diploma or equivalent; associate's degree or relevant certification is a plus. Proven experience in an administrative role, preferably in a construction or industrial environment. Intermediate to advanced skills in Microsoft Word, Excel, PowerPoint, and Outlook is required for this position. Must be mature, professional, personable, and have a polished delivery on all assignments. Ability to handle confidential information with the utmost discretion. Must be able to communicate, both written and oral, in a professional manner and represent the company in a professional manner. Must possess good follow-through skills to finalize projects. Must have above-average proofreading skills and have a history of being accurate and thorough. What we offer: Health Insurance and ESOP (Employee owned) package. Health Reimbursement Arrangement (HRA) with Medical PPO FSA and Dependent Care 401K Matching Paid Maternity & Paternity Leave Generous PTO roll-over policy Social events and gatherings throughout the year

Improving America's infrastructure isn't for the weak. It takes grit, determination, and hard work to execute high impact projects. Michels Corporation engages 8,000 people and 18,000 pieces of heavy equipment in our insatiable drive to be the best. Our work improves lives. Find out how a career as an Application Administrator can change yours. As an Application Administrator, you will support the technical planning, deployment, and support of non-enterprise applications including the related licensing administration within Michels Corporation. In addition, you will focus on the server application installation, configuration, and maintenance while ensuring proactive monitoring and application performance. Critical for success are professional management and communication skills. Why Michels? We are consistently ranked among the top 10% of Engineering News-Record's Top 400 Contractors Our steady, strategic growth revolves around a commitment to quality We are family owned and operated We invest an average of $5,000 per employee on training each year We reward hard work and dedication with limitless opportunities We believe it is everyone's responsibility to promote safety, regardless of job titles. We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long-Term Disability Insurance, 401(k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your positions and location you may participate in a different benefit plan. Why you? You thrive in fast-paced environments under tight deadlines You relish new challenges and evolving technology You enjoy collaborating and communicating with your teammates You like to know your efforts are noticed and appreciated You have strong communication skills You deliver exemplary customer service through interactions with others What it takes: Bachelor's or associate degree in computer science or related field and 3-5 years relevant experience, or equivalent combination 1-3 Years Microsoft Server Administration experience Experience with Microsoft System Center/Configuration Manager Familiar with MS SQL and PowerShell Familiar with Citrix Xen Application software deployment (desired)

BELL Construction is looking to hire an Assistant Superintendent for our Building division to oversee commercial construction projects in the Nashville, TN area. The Assistant Superintendent is responsible, in collaboration with the Superintendent, for leading, directing, and coordinating the work of Subcontractors, Field Engineers, Foremen, Interns, and trade labor and includes ensuring safety, schedule delivery, quality of work performed, and adherence to the project budget. On smaller projects, may be solely responsible for all field leadership activities. Job Responsibilities Ensures the safety of the project by adhering to all Bell Policies and OSHA safety standards. Has full ability to stop work if unsafe conditions exist and reports concerns to the project team and Safety department. Effectively mentors and provides training for field employees. Assists in the planning, direction, and prioritization of all trades to keep the project on schedule. Ensures compliance with all codes and company, state, and federal policies and regulations. Efficiently manages material resources with minimal assistance (equipment, facilities, and materials needed to complete work). Assists Project Managers in the development of schedules and Construction Reviews. Keeps daily reports and weather logs current and accurate. Helps to supervise employees effectively (direct, discipline). Communicates effectively with other trades or subcontractors regarding scheduling and coordination of work to meet deadlines. Effectively identifies and resolves potential problems, work interferences, and schedule difficulties with Superintendent. Successfully builds and maintains good working relationships with the project design team and ownership parties and effectively communicates necessary information clearly and timely. Follows all EEO/Affirmative Action guidelines as required for compliance with company, state, and federal policies and regulations, and ensures a harassment-free workplace for all employees. Completes other duties as assigned. Education & Experience Minimum required - Three (3) years of construction experience. OSHA-30 preferred. Knowledge & Skills Prior experience with Viewpoint preferred. Excellent verbal and written communication skills. Uses sound judgment and decision-making to choose appropriate actions with little-to-no supervision. We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All interested candidates are encouraged to apply.

Construction Sales Partner - Entrepreneur Mindset Wanted Have you run your own business? Then you already know what it takes to win: hustle, relationships, and delivering results. Now imagine keeping the freedom and earning potential you love - without the headaches of payroll, rent, or insurance. We're looking for experienced small business owners or independent-minded professionals to join our construction sales team. You'll leverage your business skills to sell high-quality building solutions backed by a proven brand. What We Offer: Six-figure income potential High-quality leads (no cold door-knocking) Training, tools, and marketing support Freedom to manage your own schedule No overhead, no admin headaches You'll Succeed If You: Have owned or managed a business Thrive on building relationships and closing deals Like working independently Want performance-based pay that rewards hustle Compensation: Commission + bonus structure (uncapped) 📩 Apply today and let's talk about how you can own your income - without owning the overhead. Give me a call or shoot me a text today at ************

BELL Construction is hiring for a Project Engineer to join our Heavy Highway/Civil team in Memphis, TN. The Project Engineer (PE) supports the Project Manager (PM) and Project Superintendent to facilitate a well-managed project. The PE works successfully with and responds promptly to requests from the PM to achieve goals and assists with the overall management and administration of projects, including pre-construction services, subcontractor management, RFI's, and the submittal process. Job Responsibilities Develops an understanding of construction safety practices and has the ability to stop work if unsafe conditions exist. Has a good grasp of construction terminology and a solid understanding of construction processes. Estimates CORs and assists in bidding, assembling an estimate, and subcontractor coordination. Understands all costs associated with a change request and aids the PM with change requests, Owner & Subcontractor change orders, and other items as needed. Reviews and tracks schedules to learn project flow. Ensures documentation and compliance by maintaining drawing revision logs, requesting pricing for changes in work, and evaluating/preparing/distributing RFIs. Reviews & processes submittals accurately and identifies key items of coordination for PM & Superintendent to review. Assists Superintendent in subcontract management by distributing drawings to subs and working on the submittal schedule and procurement process. Takes the lead role in the project closeout documentation. Tracks quantities for Self-Performed Work (SPW) productivity for monthly cost reports. Assists in running and completing meeting agendas. Completes contingency and allowance logs, etc. Performs additional responsibilities as assigned. Education & Experience Minimum required - Bachelor's Degree in Construction Management, Engineering, or related field. Knowledge & Skills Proficient in Microsoft Office Suite, including Excel, PowerPoint, Outlook, and Word. Previous experience using Viewpoint, Heavy Job, Heavy Bid, and Hammer Tech preferred. We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All interested candidates are encouraged to apply.

Operations Manager - Nashville TN Join Our Growth! Redi Carpet, the nation's largest multi-family flooring provider, is expanding into Nashville and seeking an Operations Manager to lead our installation operations. What You'll Do Schedule daily installations using Redi Carpet software Communicate installation details to crews Resolve installation issues and reschedule as needed Maintain subcontractor agreements and organized paperwork Ensure billing accuracy and approve installer payments Recruit and evaluate quality flooring contractors Oversee warehouse operations and enforce safety standard What We're Looking For Experience in operations management (flooring or construction preferred) Strong organizational and problem-solving skills Ability to manage multiple priorities in a fast-paced environment Bilingual (English/Spanish) preferred Tech-savvy and detail-oriented Why Redi Carpet? Competitive pay and benefits Career growth opportunities Be part of an exciting market expansion Ready to lead? Apply today and help us bring Redi Carpet's trusted service to Nashville!

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Training & development Basic Functions: Perform as a technician as work flow dictates Responsible for all contents of a home Traveling to residential and commercial housing units Gather, sort, pack affected contents of a damaged home Clean and process affected contents by hand and with industrial cleaning techniques Moving contents into box truck or moving van Moving contents into warehouse for storage Returning and unpacking contents to homeowner Overall Duties Include: Backbone of the contents divisions' field presence Ability to follow directions. Transfer and act on direction from Contents Operations Manager into physical production Work side-by-side with other Restoration Technicians to deliver a quality service on time Communication with property managers/owners Collection of field related documentation Collection of all paperwork required on each job (Authorization forms, sketches, Material forms, labor forms, scope sheets, and any other paperwork that is requested by our direct repair programs) Arrive on time Manage good use of company supplies and minimize waste Maintain company equipment to ensure longevity High Detail Job Accountabilities: Receive the work assignment at beginning of job then interpret instructions and deliver a high-quality end result. Document work completed through photos, job update notes and daily logs. Drive company vehicle in safest and most respectful manner possible Alert Operations Manager of any vehicle disturbances (Oil changes, check engine light, etc.) Maintain cleanliness of each vehicle used that day be the standards set by Paul Davis Relay homeowner or property manager questions to Operations Manager to follow up with when not able to answer yourself. Professionally represent the PD principles of honesty and integrity Work at the direction of the Lead Technician Set up work stations, including assembling boxes Assist in identifying damaged items Gather, sort, pack affected contents Clean and process affected contents Proficient utilization of applicable cleaning equipment Repackage cleaned contents Proactive communication with management and team leaders Show up clean, work clean, leave work area cleaner than it was when you arrived, and clean up after yourself Restock supplies Jobsite security and safety Cleaning of homes and commercial spaces Basic Requirements: A Background Check Background of Hard work Driver's License Personal Vehicle Smart Phone Lift, bend, pull, push repeatedly. Up to 50 lbs. Stand for periods of time up to 8 hours. Evaluated On: All work will be performed according to company policies and up to Paul Davis standards All work will be performed in accordance with safety regulations to this work Customers will be treated in a courteous and professional manner. All communication with customers will be informative and courteous Employees will ALWAYS wear a company uniform in good repair when representing this company Employees will behave in a professional and mature manner when representing this company (NO profanity, NO horseplay, etc.) Company equipment and vehicles will be kept neat, clean and smoke free in working order always. Hours: A typical shift for this position is 7am - 5pm, Monday - Friday. However, the Restoration Technician must be able to contribute to the on-call rotation for weekdays and weekends. Option to earn overtime and double time for on call contributions. Reward:Compensation is evaluated on a yearly basis effective from the start date of employment of each calendar year. An annual reward planner (ARP) is completed at that time. Benefits include; 10 days PTO, 6 paid Holidays, Health Care Options, 401k & great team environment! Compensation: $17.00 - $25.00 per hour Since 1966, Paul Davis has been an industry leader in the areas of property damage mitigation, reconstruction and remodeling. With more than 370 offices in our franchise network, the company serves residential, institutional, and commercial customers and clients across the United States and Canada. We have built our heritage one project at a time, establishing a reputation for performance, integrity and responsibility among customers and carriers alike. Whether property damage is caused by water, fire, smoke, storms or other disasters, we deliver on our promise to deliver excellence, expertise and a customer experience that is second to none. At Paul Davis, our passion for quality drives everything we do. Our Vision: To Provide Extraordinary Care While Serving People In Their Time Of Need. Our Values: Deliver What You Promise Respect The Individual Have Pride In What You Do Practice Continuous Improvement Our Mission: To provide opportunities for great people to deliver Best in Class results

Weather Shield, now a part of the Pella Family of Brands, is seeking an Engineering Specialist to join the team. In this role you will join a cross-functional engineering team focused on the development and implementation of products, processes and tooling to build windows, doors, and related accessories. This is an onsite role that reports to our Medford, WI office. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned Defines overall print and documentation structure for new product lines. Applies advanced computer skills such as Solid Edge and CAD (both 2-D and 3-D systems) in the development and design of product components and or systems. Prepares layout, part, subassembly, and assembly models and drawings. Identifies design issues during model creation and assists engineering to develop creative solutions. Uses Excel to create part dimension tables and calculators for various product configurations. Assigns part numbers per established guidelines. Prepares change orders and manages approval process. Develops matrix bill of materials by understanding the product design, interpreting engineering print structure, and translating to the flat BOM format. Communicates BOM information to IT team for systems loading and manages subsequent communication and updates. Assigns component costs based on input from supply management, manufacturing, and engineering, and creates overall product material cost estimates. Develops / owns / coordinates PIT (Part Information Tracking) data. Communicates and works with external vendors. Tracks the status of quoting, producibility, PPAP, and initial production shipments of new components. Works with supply management, product management, process design, product design and plant teams to determine material inventory attributes such as part lengths, make vs. buy, lead time, inventory location, etc. Participates in systems integration testing to validate BOM and Configuration rules prior to product launch. Works with internal and external testing facilities to evaluate product and component performance. Develops test plans, builds and/or acquires samples needed for testing, and communicates results. Assists with the execution of product certification plans which may include testing, summarizing of information, communication to certification and testing agencies, and updating/validation of internal information systems. Leads and/or participates in continuous improvement efforts and 3P events. Supports Ready-to-Serve product line sustainment activities such as BOM reviews, product re-certifications, answering customer service questions, etc. Develops estimates for time, cost, and quality for projects. Manages project details including task lists, timelines, and milestones. Designs, specifies and/or modifies tooling, fixtures, and machines that may be needed to support product changes. Performs logical reasoning and demonstrates proficiency in problem solving. Proficient in Excel, Word, Oracle, Outlook, etc. and has an aptitude to learn as technology evolves. Promotes safety through design and actions. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate Degree (A. A.) or equivalent from two-year college or technical school; Bachelor's degree (B.A.) from four-year college or university preferred; and six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. COMPUTER SKILLS Word, Excel, Power Point, CAD, 3-D Modeling, Oracle, Agile, and Solid Edge / Solid Works PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The Commissioning Manager will be based on the construction project jobsite. In this role, you will be responsible for overseeing all commissioning activities and processes for assigned projects. The Specifics of the Role Review project documentation, including plans, specifications, and schedules. Review submittals and shop drawings for compliance with project requirements. Develop and implement commissioning plans and documentation, including schedules. Responsible for daily commissioning activities on project site. CX Leader on the project, chair meetings coordinate CX activities. Mentor and coach junior level staff on the CX process. Manage CX schedule and coordinate support needed from Field Superintendents, QA/QC staff, CX Engineers. Coordinate with Operations Team and Project Management team on schedule, budget, training, and issues that arise. Inspect and test all equipment and systems to ensure compliance with safety policies and project requirements. Coordinate any equipment and material deliveries with vendors and subcontractors. Perform pre-commissioning and start-up inspections to confirm project is ready for commissioning activities. Audit CX paperwork for accuracy and completeness. Coordinate CX activities and required team/vendor required onsite days. Provide updates and reports on any commissioning issues in a timely manner to all necessary parties. Prepare for transition to client after final inspections and commissioning processes are complete. Manage Observations/Issue log, update and track through closure. Responsible for integrated system testing and compilation of results. Perform other duties as necessary. Requirements Bachelor's degree in Engineering or related field or equivalent experience. 6-10 years of experience in construction, commissioning, start-up, and operations on large scale projects. ANSI CX certification is a plus. Data Center Commissioning experience a plus. Building Automation Systems (Controls) experience a plus. Proficient in creating, reviewing, and presenting reports regarding commissioning activities. Experience developing plans and processing relating to commissioning for large scale construction projects. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

```html About the Company NAES is seeking a Combustion Turbine Technician to support operations at a Simple Cycle combustion turbine facility in Neenah, Wisconsin. The Technician will be responsible for performing a wide range of duties related to the safe and reliable operation, inspection, and maintenance of combustion turbine systems, with an emphasis on electrical and instrumentation/control (I&C) systems. The ideal candidate will bring a strong electrical background and a collaborative, safety-first mindset to support power generation operations in compliance with regulatory and company standards. About the Role The Combustion Turbine Technician will support operations at a Simple Cycle combustion turbine facilities in Sheboygan & Neenah, Wisconsin. There are TWO DIRECT Hire Positions and relocation assistance is provided to the right candidate Responsibilities Operate and monitor combustion turbines and auxiliary equipment in accordance with safety and environmental regulations. Perform troubleshooting, repairs, and routine maintenance on electrical and I&C systems. Conduct inspections and preventative maintenance using Maximo or similar CMMS systems. Calibrate and maintain instrumentation, control systems, and performance monitoring equipment. Maintain accurate logs of plant operations, equipment conditions, and maintenance activities. Support water treatment operations, including chemical handling and system performance testing. Operate mobile and heavy equipment to assist with maintenance activities. Collaborate with internal teams and contractors during equipment installation and repairs. Perform light welding and mechanical repairs as needed. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain plant cleanliness and adhere to all safety policies and procedures. Provide support to other generating facilities as required. Qualifications Associate Degree in Electrical, Mechanical, or Instrumentation & Control Technology required. 4+ years experience in electrical, mechanical, or I&C trades, OR 2+ years of experience in combustion turbine operations and maintenance. Completed apprenticeship in a related trade is a plus. Demonstrated up-to-date electrical or I&C field experience is required. Required Skills Strong background in electrical or instrumentation and control (I&C) systems. Familiarity with combustion turbine operation and maintenance. Ability to read and interpret blueprints, diagrams, and specifications. Demonstrated mechanical and/or electrical aptitude. High level of personal and technical responsibility. Ability to work independently or as part of a collaborative team. Valid driver's license required. Must reside within 60 minutes of the Neenah Generating facility per company policy. Preferred Skills Completed apprenticeship in a related trade is a plus. Pay range and compensation package Compensation details are not specified in the provided job description. Equal Opportunity Statement NAES is committed to diversity and inclusivity in the workplace. ```

Job Summary for Material Cycle Counter As a Materials Cycle Counter, you will completes cycle counting process, analyze discrepancies to determine problem causes and supports inventory management projects. Shift: 1st shift Opportunity 4am-12:30pm Wage: $19 doe Material Cycle Counter Key Responsibilities: Perform daily cycle counts of materials and update inventory records accordingly. Investigate and resolve any discrepancies between physical counts and system data. Collaborate with the warehouse team to ensure accurate material handling and reporting. Utilize inventory management software to track materials and ensure accurate data entry. Identify and report any potential issues with inventory discrepancies and recommend corrective actions. Use fork trucks and order picker to load or unload. Requirements Qualifications: Previous experience in inventory control or cycle counting preferred. Strong attention to detail and a high level of accuracy. Proficient in using inventory management systems and Microsoft Office Suite (Excel, Word, Outlook). Ability to lift and move products weighing up to 50 pounds. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Ability to work independently and manage time effectively. Parallel Employment is an Equal Opportunity Employer. Benefits To be discussed at time of hire We are an equal opportunity employer #ind456

Territory Sales Representative DEPARTMENT: Sales CLASSIFICATION: Exempt, Full-Time General Responsibilities: The Territory Sales Representative will be responsible for helping grow the Residential and Light Commercial (RLC) customer base in the designated market. This position will build long term relationships with customers, accounts, and manufacturers across all organization levels and functions. The Territory Sales Representative will also educate and promote BCS product lines and offerings to aid the growth of product distribution from BCS Parts to customers. Reports to: Sales Manager Direct Reports: None Direction: * Minimal supervision. MAJOR RESPONSIBILITIES: 80% Build relationships, educate, and promote products by using sales strategy and execution methods * Build and drive demand for Residential and Light Commercial (RLC) products and expand BCS market by collaborating with the sales team to develop a strategy and marketing programs for your territory. * Responsible for outside sales calls to ensure personal and departmental sales goals are achieved. * Continually seek opportunities to nurture relationships by increasing the happiness of client base and identifying target accounts within residential and light commercial HVAC market. * Creatively educates mechanical contractors, dealers, and end-users on the value proposition and benefits of BCS product lines. * Consistent effort toward achievement of Business Activity Metrics that drive sales performance and effectiveness. * Champions effort to move an increasing number of customers into the LG excellence program. * Offer cutting-edge solutions that meet the customer's needs based on their technical specifications and individual requirements. * Manage and coordinate the quotation process and generates proposals. * Engage in Trade Shows, Product Launches, Vendor Activities, and other industry events to maximize connectedness to the market and customer base. * Works with Parts Team in the development of strategic short and long-range sales objectives. * Responsible for achieving sales objectives regarding market share and growth goals. * Responsible for keeping alignment of external market conditions and internal requirements related to the Parts department with the objective of driving top-line revenues. * Logs all customer and sales activity in Sugar (CRM). 20% Training and development * Attend required sales training development. * Is actively engaged in obtaining supplemental industry training and where applicable. * Works with Parts Manager in coordinating and facilitating development and skills. * Studies literature and attends seminars to keep current in products, processes and materials. QUALIFICATIONS: Education * A Bachelors degree in business, engineering, or another technical field of study, or equivalent work experience preferred. Skills and Experience * Minimum 5 years of technical outside sales experience, required. * Knowledge of HVAC equipment, preferred. * Knowledge of the electrical business (industrial/automation) and/or its distribution channels. * Experience working with independent sales rep organizations, preferred. * Skilled at customer needs assessment and development of sales proposals. * Strong interpersonal skills. * Ability to work as part of a team. * Strong math skills * Excellent oral and written communication skills. * Excellent time management and organizational skills. * Strong problem-solving ability. * Proficient in Microsoft Office. Certificates, Licenses, Registrations * Valid driver license for daily responsibilities of calling on customers. Other Requirements * Requires travel up to 50% annually, mostly within the BCS territory. * Requires some evening and weekend work. Training and development: * Completes training as required.

A Day in the Life of a Skilled Tradesman As a Skilled Tradesman, you provide a variety of restoration and disaster recovery services when sub-contractors aren't an option, ensuring quality workmanship on projects for First Onsite clients. You assist with administrative tasks such as daily field reports, crew sheets, and tracking expenses for projects, but you also provide the physical labor to get things done - from painting to installing, taping, and texturing drywall to installing both interior and exterior finishes. You are the muscle for building, construction, and demolition sites and may even participate in mitigation activities, such as water extraction, mold remediation, emergency board-ups, or tarping roofs. Whether loading/unloading materials, machinery, and tools or cleaning and preparing, you maintain safety at all times and adhere to Environmental, Health, and Safety protocols. You don't hesitate to help the team wherever and whenever you're needed, as you are willing to travel and are available for emergency/after-hours/weekend calls. You are providing a positive experience to clients during their time of need, and your hard work provides reassurance that First Onsite is the only restoration partner they'll ever need. You take pride in what you do every day and are thrilled to be part of a team that supports and encourages your professional growth and development. Responsibilities: * Assist with mitigation activities, including water extraction, fire and mold remediation, light demolition, emergency board-ups, and equipment setup * Maintain vehicles, tools, and job sites cleaned, stocked, and ready for rapid response * Support daily project operations by completing documentation, tracking expenses, and communicating updates to leadership * Perform physical labor on restoration, construction, and demolition sites, including loading materials and preparing safe work areas * Utilize basic construction skills such as painting, drywall installation/patching, texturing, and interior finish work * Follow all Environmental, Health, and Safety protocols while working in potentially hazardous environments or disaster sites * Be flexible with overtime, weekend work, 24/7 emergency response, and potential travel as needed Experience & Education: * Possess or willingness to obtain a Water Mitigation Certificate within 1 year * Restoration experience, preferred (will train) * Construction experience, preferred * High school diploma or equivalent First Onsite provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. First Onsite (and its Companies) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer's Form I-9 to confirm work authorization. This is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Third party resume submissions not accepted. Any resume submitted will be considered the property of THE COMPANY, and THE COMPANY will not be held liable to pay a placement fee. First Onsite provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. First Onsite (and its Companies) participates in E-Verify. We will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS) with information from each new employer's Form I-9 to confirm work authorization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Third party resume submissions are not accepted. Any resume submitted will be considered the property of THE COMPANY, and THE COMPANY will not be held liable to pay a placement fee.

Candidates will be responsible for the development of prototype control panels, supply application development input, and support initial design requirements. We are involved in many industries and exciting projects. Duties and Responsibilities: Includes the following. Other duties and responsibilities may be assigned based on experience Works with engineering staff to determine and implement application solutions for control panels Design schematics to UL standards from scratch based off hand sketch provided by engineers Detail-focused and navigates manufacturer manuals to ensure correct functionality Strong electrical schematic understanding Acts as a liaison between the company and customers as it relates to build and design requirements Determines the correct design, components, and wiring instructions for first-time builds and develops the documentation to take into production Identifies improvements and enhancements to improve overall design and/or product performance Ensures all updates and changes are identified and accurately documented for future builds. Complete and maintain all required paperwork, records, documents, etc. Reviews projects to ensure efficiency is maintained Works with QC to maintain and improve on all instructions Ensures all safety, work rules, and regulations are maintained Qualifications: Strong knowledge of the workings of machine controls Should understand AutoCAD or be able to quickly learn A 2-year technical degree is desired with electrical schematics knowledge/experience. An Electrical Engineering degree is a plus. Will be required to study and pass UL test Able to calculate wire sizing, perform heat calculations, circuit protection, etc. Detail-oriented Ability to take an undefined project or concept and develop a controls system to support Machine building or maintenance experience is also a plus

Basic Functions:· Retain and Grow relationships with Key Accounts in the Insurance Agents and Brokers Vertical· Recruit Key Partnered Insurance Agent and Broker Accounts· Onboard and Train Key Partnered Relationships the Paul Davis Way· Be the Face of Paul Davis at Chambers and other Associations while committing to being on committees.· Coordinate Meetings, Lunches, and presentations to educate and probe for win/ win relationships.· Make Face to Face stops on 8 week rotation with agents.· Supports and assists the Relationship Development Team · Schedules, invites and facilitates Continuing Education Courses to Insurance Professionals.· Takes responsibility for communicating to key accounts regarding ongoing projects. · The Agent Marketer will be expected to take on additional responsibility over time based upon their desire, initiative & performance.· This Agent Marketer role is ever evolving, and functions may be added/removed over time. Basic Requirements:· High School Diploma or equivalent· Associates or bachelor's degree is desired especially in area of Marketing or Entrepreneur · Experience in marketing and customer service.· Highly Organized and versed in prioritization of tasks.· High level Communicator· High aptitude in Microsoft office suite· Dependable transportation· Smart Phone· Appropriate Attire· Fun and Outgoing Personality Evaluated On:· Results of Sales over time· Growth of Accounts· Commitment to team· Skill Development versus Annual Skill Development Goals· Performance in alignment with the job description· Behaviors aligned with the Vision, Mission, Values, 10 Serving Basics and Brand Promise Overall Primary Duties:· Retain lasting relationships with key accounts to capture new revenue through new and existing relationships with insurance agents and brokers.· Work directly with Relationship Development Team to ensure a positive client experience. · Grow the Agent and Broker Accounts based on sales from prior years· Set proper expectations with Insurance Agents and Brokers· Recruit new key accounts that align with the Paul Davis way.· Build, create and execute on win/ win business relationships· Teach, Train and Onboard New and Existing Accounts· Brand the Paul Davis name by being involved in Agent Associations and being committed to being on a board. Not limited to MIIAB or Chambers. · Review, Update and Manage RMS and Salesforce software· Create and follow Agent and Brokers Sales Budget monthly and yearly. Secondary Duties: · Maintain a strong relationship field presence, while balancing the necessary desk work required for admin and follow up. · Participate in Relationship Development events · Create and Manage Win/ Win Business relationships· Professionally handle and resolve all complaints in a timely fashion.· Work directly with the Relationship Development Team to build long lasting relationships with accounts. · Provide feedback to Relationship Development Team on observations from the field and the relationship.· Build relationship in the community by branding the Paul Davis name and brand· Plan and Schedule All Continuing Education Courses for Insurance Agents and Brokers· Learn and work with Priority Management principles to create default schedules for your own time that properly allocate slush time.· Attend all Paul Davis events.· Attend Bi-Weekly Relationship Development Team Meetings· Attend Bi-Weekly GS&R· Share your office365 calendar with your supervisor on an ongoing basis. · Follow all other company policies and procedures as communicated in the All-Team Handbook (Employee Handbook) High Level Job Responsibilities Include:· Participate in emergency services when an “All Hands-On Deck” scenario arises.· Participate in ongoing problem solving and practicing continuous improvement of the department and company.· Participate in Paul Davis social events, Goal Setting and Review, All Team Meetings and as many other opportunities as possible to engage with the rest of the team.Hours:· This is a full-time position with some evening activities· Hours required will vary and will often require travel to customer locations typically within a couple hour radius of the home office.Reward:· Compensation is evaluated on annual basis in quarter 1 of each year after a full year is completed. · Promotions and advancement within the position bring progressively greater challenge, learning & responsibility. Physical Requirements:· Able to lift 50 pounds and carry at least 20 feet· Able to climb 2 flights of stairs while carrying 30 pounds.· Able to traverse water, fire, and smoke damaged flooring Compensation: $50,000.00 - $100,000.00 per year Since 1966, Paul Davis has been an industry leader in the areas of property damage mitigation, reconstruction and remodeling. With more than 370 offices in our franchise network, the company serves residential, institutional, and commercial customers and clients across the United States and Canada. We have built our heritage one project at a time, establishing a reputation for performance, integrity and responsibility among customers and carriers alike. Whether property damage is caused by water, fire, smoke, storms or other disasters, we deliver on our promise to deliver excellence, expertise and a customer experience that is second to none. At Paul Davis, our passion for quality drives everything we do. Our Vision: To Provide Extraordinary Care While Serving People In Their Time Of Need. Our Values: Deliver What You Promise Respect The Individual Have Pride In What You Do Practice Continuous Improvement Our Mission: To provide opportunities for great people to deliver Best in Class results

Role: Device Engineer Experience: 8+ Years What candidate will Be Doing: Principal Accountabilities Perform development and verification for avionics products like Display, Air-Ground communication systems. High level requirements, Low Level Requirements creation, development and review. Perform HW/SW integration testing compliance to DO 178B/C. unit testing Agile mode execution, align and participate in Review process. Co-ordination with cross functional team Design, analyze, and develop product solutions using established programming languages, tools, and security baselines. Enhance and maintain development and testing frameworks to ensure reusability, scalability, stability, and optimal performance. Prepare and execute comprehensive test plans; develop automated and manual test scripts to validate new features and improve existing products. Conduct reviews in alignment with standards and perform analysis; troubleshoot and resolve product issues of moderate complexity. Document technical deliverables throughout the project lifecycle, including specifications, design documents, code comments, test cases, test reports, and release notes. Collaborate with other technical leads to develop unit test; ensure thorough documentation. Provide guidance and support to junior team members, fostering technical growth and collaboration. Job Complexity Requires in-depth knowledge and experience Solves complex problems; takes a new perspective using existing solutions Works independently; receives minimal guidance Acts as a resource for colleagues with less experience Represents the level at which career may stabilize for many years or even until retirement Contributes to process improvements Typically resolves problems using existing solutions Provides informal guidance to junior staff Works with minimal guidance Experience / Education Typically requires 5-7 years of related experience with a 4 year degree; or 3 years and an advanced degree; or equivalent work experience. Work Arrangement Fully On-Site: Must be able to travel to an Arrow Client office location as requested by Arrow Client leadership. Location: US-WI-Oak Creek-Wisconsin About eInfochips eInfochips, an Arrow company (Fortune #154), is a leading global provider of product engineering and semiconductor design services. A rich history of over two decades, with over 500+ products developed and 40M deployments in 140 countries, eInfochips continues to fuel technological innovations in multiple verticals. eInfochips has strategic technology partnerships with Qualcomm, NVIDIA, NXP, Analog Devices, Texas Instruments, Amazon, Microsoft and Google to name a few. Along with Arrow's $33B in revenues, 22,000 employees, and 345 locations serving over 80 countries, eInfochips is primed to accelerate connected products innovation for 150,000+ global clients. eInfochips acts as a catalyst to Arrow's Sensor-to-Sunset initiative and offers complete edge-to-cloud capabilities for its clients. Please visit ****************** for our portfolio of product engineering services across various industries C verticals. Arrow's Sensor-to-Sunset initiative and offers complete edge-to-cloud capabilities for its clients. Please visit ****************** for our portfolio of product engineering services across various industries C verticals. EEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. Location:US-WI-Oak Creek-Wisconsin (Astronautics) Time Type:Full time Job Category:Engineering ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.