Test Technician jobs at Building & Earth - 1239 jobs

This role supports acceptance testing for production and development/prototype products in a fast ‐ paced manufacturing and engineering environment. The Test Technician will perform hands ‐ on testing, troubleshooting, and data analysis while working directly with engineering teams. Responsibilities: Apply strong problem ‐ solving skills to identify alternate solutions to technical challenges. Fault ‐ isolate issues between test environments (test stations, interface adapters, test cables, etc.) and devices under test. Observe, analyze, and report on test data in accordance with test requirements. Select and set up appropriate test equipment based on specifications. Interpret test data (plots, graphs, tabulated parameters) to determine pass/fail conditions and escalate when needed. Use hand tools, torque tools, analyzers, and power tools as required. Support production testing and troubleshooting activities in collaboration with engineering. Requirements: Minimum 2 years of relevant testing experience (STEM education may substitute). Experience with VM, CMES, SAP, or other manufacturing automation tools. Proficiency in Microsoft Excel, MATLAB, basic programming, and general computer literacy. Ability to perform testing using procedures, schematics, engineering drawings, and written/verbal instructions with limited supervision. Qualifications We Prefer Experience with oscilloscopes, pulse generators, network analyzers, signal generators, multimeters, and similar test equipment. Hands ‐ on experience in manufacturing, assembly, aviation, naval, or similar technical environments. Experience with RF and high ‐ voltage testing. Experience working in structured, regulated, or security ‐ sensitive production environments. Physical Requirements / Working Conditions: Candidates must be able to meet the physical demands of a defense production test environment, including: Standing or sitting for extended periods (8-10 hours). Lifting and carrying 35-50 lbs. Frequent bending, reaching, twisting, kneeling, or climbing ladders. Working near electronic equipment, high ‐ voltage devices, and RF systems. Wearing required PPE (safety glasses, ESD straps, hearing protection). Working in environments with noise, temperature changes, or vibration. Moving test racks, carts, and large cable bundles as needed. Handling small components, wiring, and precision tools with strong manual dexterity and visual acuity. Education: Must Have High school diploma or AA/AS degree (or equivalent 2 ‐ year technical training). We offer attractive, competitive compensation and benefits including, medical, dental, 401k, short-term disability, AD&D, tuition reimbursement, and more. If you take pride in your work and are committed to personal and professional success, let's talk. Please visit **************** to learn more. Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Adecco is hiring immediately for Engineering Techs with a local client in Austin, TX. Weekly pay starting at $23.00-$26.00 per hour and competitive benefits with options such as medical, dental, vision, and 401(k). We have openings on multiple shifts and can help you find the best shift to fit your schedule. This position requires a High School Diploma or GED, 1-2 years of previous experience, the ability to work independently or with a team and the ability to multitask. In this role, you will be performing complex testing, troubleshooting, and repair tasks on electro/mechanical systems, working with intricate schematics, diagrams, and verbal/written instructions, often with minimal documentation. The role involves performing mechanical, soldering, and repair duties, writing detailed technical reports and test procedures, conducting operational tests and fault isolation, diagnosing and resolving system malfunctions, collaborating with other teams to address undefined issues, and assisting or mentoring junior technicians with complex tasks. Click on Apply Now to be considered for this Engineering Tech job in Austin, TX. **Pay Details:** $23.00 to $26.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

We are seeking a Controls Technician to provide 2nd-level technical support for PLC-based controls systems in support of new production line installations within a manufacturing environment. Key Responsibilities Troubleshoot and support PLCs, HMIs, drives, and safety systems (Allen-Bradley / Rockwell preferred) Support controls hardware, panel wiring, and system integration Participate in all project phases including design support, fabrication, off-line testing, installation, start-up, and training Provide production start-up support and assist with technology transfer to plant personnel Contribute ideas to enhance manufacturing capability and reliability Qualifications 4+ years of experience with PLCs, HMIs, drives, and safety systems Experience in a manufacturing environment Strong troubleshooting, structured programming, and communication skills Ability to execute assignments independently in a team-based environment AAS degree preferred or equivalent experience

The Silkscreen Technician is responsible for setting up, operating, and maintaining screen printing equipment to produce high quality printed graphics on a variety of substrates (metal, fiberglass, carbon fiber, etc.). The role blends technical skill, attention to detail, and an eye for color and registration to ensure each run meets customer specifications, quality standards, and production schedules. Key Responsibilities Pre-Production & Setup • Review job orders, artwork files, and client specifications (colors, size, placement, substrate). • Prepare screens: coat with emulsion, expose using UV light, wash out images, and inspect for pinholes. • Select and stretch appropriate mesh count for each job. • Register screens accurately using registration marks or alignment tools. Ink & Material Management • Mix custom inks to match client-specified colors, maintaining consistent viscosity. • Store inks, solvents, and cleaning chemicals safely and label them per OSHA/site standards. • Track inventory of screens, squeegees, substrates, and consumables; request re-orders as needed. Printing Operations • Load substrates onto the press (manual). • Adjust squeegee pressure, angle, and speed for optimal ink transfer. • Perform multi-color prints, ensuring precise registration for each pass. • Conduct test prints, make adjustments, and obtain approval before full run. Quality Control • Inspect prints for color fidelity, registration, ink density, and defects (smudges, streaks, ghosting). Post-Production • Cure or dry prints using ovens or air-dry methods as required. • Clean screens, squeegees, and press components after each job. Safety & Housekeeping • Follow all safety protocols (PPE, ventilation, proper chemical handling). • Maintain a clean, organized work area; dispose of waste according to environmental regulations. Skills Required Technical Skills • Proficient in screen preparation (emulsion coating, exposure, washing). • Ability to mix and match epoxy inks (solvent-based). • Knowledge of color theory and registration techniques. • 1-3?years of hands-on screen-printing experience (commercial, apparel, or fine-art). • Familiarity with manual screen-printing presses is preferred. Experience Required • 1-3?years of hands-on screen-printing experience (commercial, apparel, or fine-art). • Familiarity with manual screen-printing presses is preferred. Technical Skills • Proficient in screen preparation (emulsion coating, exposure, washing). • Ability to mix and match epoxy inks (solvent-based). • Knowledge of color theory and registration techniques. Physical Requirements • Ability to stand for long periods, lift up to 50?lb, and perform repetitive motions. • Good hand-eye coordination and visual acuity for detailed inspection. • No known sensitivity or allergy to thinners, solvents, or epoxy-ink fumes. Software • Basic proficiency with graphic-design file formats (AI, EPS, PDF) and RIP software is advantageous. • Basic proficiency with MS office suite (Outlook, Word, Excel) is required. Safety Awareness • Understanding of OSHA regulations, MSDS, and proper PPE usage. Education Required • High school diploma or GED required. • Associate's degree or certification in graphic arts, printing technology, or related field is a plus.

BB&E is a full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering and Program/Project Management Services to Federal and private sectors. Position Summary BB&E is currently looking for a Construction Surveillance Engineering Technician to support the NAVFAC Southeast (SE) Headquarters, Public Works Departments (PWD) and Resident Officer in Charge of Construction (ROICC). This position is at NS Panama City, FL. Job Duties & Responsibilities Provide overall coordination of the construction quality management program for assigned projects In conjunction with the Construction Manager (CM), review and provide recommendations toward approval of contractor quality control plan Attend selective quality control (QC), preparatory and initial meetings, and monitor three-phase checklists for accuracy and thoroughness Provide relevant remarks on Government Quality Assurance (QA) reports (or in identified section of Contractor's QC reports), particularly on critical, definable features of work included Take/file/distribute progress photos Validate quantity, condition, and approval of materials on site prior to Government issuing invoice payments Coordinate support to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC, electrical -pad mounted transformers/high-voltage systems/switchgear/automatic transfer switches/frequency converters, fire and life safety/fire protection systems, roofing systems, and underwater structures). Assure quality workmanship in accordance with specifications and industry standards on concrete/masonry/stucco/ building, envelope/structural steel/bolting/welding, and other building materials/structural systems, as required Attend/witness selected tests and review all applicable test reports and results Keep the Government sponsor advised as to the status of projects under his/her administrative and technical control, but the responsibility to plan and carry out the assignment is accomplished independently Requirements It is expected that the minimum education and professional experience requirements have been met, as listed below. Experience & Education A minimum of 5 years of verified experience as a Quality Control Manager working for General Contractors on NAVFAC or US Army Corps of Engineers (USACE) projects OR 10 years of verified foreman experience in one or more of following trades: Concrete; Mechanical; Electrical; Masonry; or Carpentry on commercial/industrial/military projects; residential experience does not qualify Must complete the USACE Construction CQM Certification Physical Requirements: To successfully perform the essential duties of this position, an individual must be able to perform the following: Must be able to stand, walk, bend, stoop, crouch, crawl, navigate across uneven ground that is common at construction sites and climb for extended periods as well as when traveling to and from job sites Must be able to lift, carry, push, and pull materials and equipment weighing up to 50 pounds regularly * Must be able to work both indoor/outdoor (with exposure to the elements) Must be able to work in confined spaces and under varying environmental conditions, including heat, cold, humidity, rain, wind, dust, and noise Must be able to wear and use required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, hearing protection, steel-toed boots, fall protection safety vests and high-visibility reflective safety vests Must have sufficient visual and auditory acuity to perform tasks safely and effectively, including reading instruments, recognizing hazards, and communicating on active construction sites Must be able to drive company or personal vehicles to and from field locations, sometimes multiple times per day, and may be required to work variable shifts depending on project needs Work Environment: Primarily operates in an outdoor environment where various weather conditions could be encountered, depending on the location and season. May encounter extreme temperatures, airborne particles, fumes, chemicals, or loud noise. Worksites might contain high-voltage equipment, exposed wires, and other electrical hazards that will require strict adherence to safety protocols. LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits Competitive compensation packages Participation in the Employee Stock Ownership Plan - BB&E is 100% employee-owned! Discretionary bonus *Medical, Dental, and Vision Insurance with health care concierge *Employer provided Short-Term & Long-Term disability *Employer provided Life insurance *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits *Generous PTO plus 11 paid holidays Traditional & Roth 401(k) options with fully vested employer match Tuition reimbursement & professional development Employee referral program Employee discounts Employee Assistance Program (EAP) Pet insurance discount *Applies only to full-time employees *BB&E is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

BB&E is a full-service civil and environmental engineering and consulting firm, headquartered in Northville, Michigan, which services both the Federal and Industrial sectors throughout the United States. BB&E team members provide Environmental Consulting, Facilities Engineering and Program/Project Management Services to Federal and private sectors. Position Summary BB&E is currently looking for a Construction Surveillance Engineering Technician to support the NAVFAC Southeast (SE) Headquarters, Public Works Departments (PWD) and Resident Officer in Charge of Construction (ROICC). This position is at Naval Station Mayport in Jacksonville, FL. Job Duties & Responsibilities Provide overall coordination of the construction quality management program for assigned projects In conjunction with the Construction Manager (CM), review and provide recommendations toward approval of contractor quality control plan Attend selective quality control (QC), preparatory and initial meetings, and monitor three-phase checklists for accuracy and thoroughness Provide relevant remarks on Government Quality Assurance (QA) reports (or in identified section of Contractor's QC reports), particularly on critical, definable features of work included Take/file/distribute progress photos Validate quantity, condition, and approval of materials on site prior to Government issuing invoice payments Coordinate support to review and witness successful testing and commissioning/certification of critical systems (i.e., mechanical - HVAC/TABS/DALTS/DDC, electrical -pad mounted transformers/high-voltage systems/switchgear/automatic transfer switches/frequency converters, fire and life safety/fire protection systems, roofing systems, and underwater structures). Assure quality workmanship in accordance with specifications and industry standards on concrete/masonry/stucco/ building, envelope/structural steel/bolting/welding, and other building materials/structural systems, as required Attend/witness selected tests and review all applicable test reports and results Keep the Government sponsor advised as to the status of projects under his/her administrative and technical control, but the responsibility to plan and carry out the assignment is accomplished independently Requirements It is expected that the minimum professional experience requirements have been met, as listed below: Experience & Education A minimum of 5 years of verified experience as a Quality Control Manager working for General Contractors on NAVFAC or US Army Corps of Engineers (USACE) projects OR 10 years of verified foreman experience in one or more of following trades: Concrete; Mechanical; Electrical; Masonry; or Carpentry on commercial/industrial/military projects; residential experience does not qualify Must complete the USACE Construction CQM Certification Physical Requirements: To successfully perform the essential duties of this position, an individual must be able to perform the following: Must be able to stand, walk, bend, stoop, crouch, crawl, navigate across uneven ground that is common at construction sites and climb for extended periods as well as when traveling to and from job sites Must be able to lift, carry, push, and pull materials and equipment weighing up to 50 pounds regularly Must be able to work both indoor/outdoor (with exposure to the elements) Must be able to work in confined spaces and under varying environmental conditions, including heat, cold, humidity, rain, wind, dust, and noise Must be able to wear and use required personal protective equipment (PPE) such as hard hats, safety glasses, gloves, hearing protection, steel-toed boots, fall protection safety vests and high-visibility reflective safety vests Must have sufficient visual and auditory acuity to perform tasks safely and effectively, including reading instruments, recognizing hazards, and communicating on active construction sites Must be able to drive company or personal vehicles to and from field locations, sometimes multiple times per day, and may be required to work variable shifts depending on project needs Work Environment: Primarily operates in an outdoor environment where various weather conditions could be encountered, depending on the location and season. May encounter extreme temperatures, airborne particles, fumes, chemicals, or loud noise. Worksites might contain high-voltage equipment, exposed wires, and other electrical hazards that will require strict adherence to safety protocols. LIMITATIONS AND DISCLAIMER: The above job description is meant to describe the general nature and level of work being performed; it is not intended as an exhaustive list of all duties, responsibilities and required skills for the position. Employees will be required to follow any other job-related instructions and to perform other duties requested by their supervisor in compliance with Federal and State Laws. Required are representative of minimum levels of knowledge, skills and/or abilities necessary to perform each duty proficiently. Continued employment remains on an "at-will" basis. Benefits Participation in the Employee Stock Ownership Plan - BB&E is 100% employee-owned! Discretionary bonus *Medical, Dental, and Vision Insurance with health care concierge *Employer provided Short-Term & Long-Term disability *Employer-provided Life insurance *Employee options for supplemental life, supplemental accident, critical illness, hospital indemnity, and Identity theft protection benefits *Generous PTO plus 11 paid holidays Traditional & Roth 401(k) options with fully vested employer match Tuition reimbursement & professional development Employee referral program Employee discounts Employee Assistance Program (EAP) Pet insurance discount *Applies only to full-time employees *BB&E is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.

NOVA Engineering & Environmental is seeking a highly organized and detail-oriented Permit Technician in the Westlake, FL area. This role serves as a critical point of contact for the public, city staff, inspectors, plans examiners, and the Building Official. The ideal candidate will demonstrate exceptional customer service skills, strong organizational abilities, and the capacity to manage multiple priorities in a fast-paced environment. Key Responsibilities: Permit Processing: Review and process permit applications, collect and record payments/fees, and conduct permit audits to ensure compliance. Documentation & Records Management: Maintain accurate and organized files, including permits, inspection reports, blueprints, and reference materials. Customer Service: Provide professional assistance to contractors, homeowners, and the public regarding permitting requirements and building department services. Inspection Coordination: Schedule inspections for building code compliance and assist inspectors with administrative support. Contractor Registration: Maintain and update contractor registration records. Data Management: Perform data entry tasks, manage fee details, and maintain Excel spreadsheets (e.g., tax logs). Communication: Answer phones, respond to inquiries, and ensure timely resolution of customer needs. Additional Duties: Support the Building Official and department staff with related tasks as assigned. Minimum Qualifications High School diploma or equivalent; Associate's or Bachelor's degree preferred. Previous experience in permitting with a municipality or building department highly preferred. Strong understanding of construction permitting processes and building codes. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Valid State Driver's License. Preferred Qualifications: International Code Council (ICC) Permit Technician Certification (not required but strongly preferred). Experience with permitting software systems and electronic document management. Familiarity with Florida Building Code and related regulations. Core Competencies: Exceptional customer service and interpersonal skills. Strong attention to detail and organizational abilities. Ability to multi-task and prioritize in a deadline-driven environment. Effective written and verbal communication skills. NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law. About Nova: Established in 1996, NOVA was originally founded to provide Environmental Consulting, Geotechnical Engineering, and Construction Materials Testing and Inspection services to the design and construction community, largely in the southeastern United States. Since our founding, NOVA has added additional service lines such as Facilities and Building Envelope, Forensics, Municipal and more. We are dedicated to providing a wide variety of projects and services with an emphasis on collaboration and safety. We offer a stimulating and inspiring work environment where our employees are recognized for their efforts and achievements and are mentored for professional growth. Currently, NOVA employs 650+ personnel in 20 offices serving clients throughout the southeastern United States and beyond. Our firm has professional and administrative support staff that includes registered professional engineers, registered professional geologists, environmental scientists, registered roof observers, LEED accredited professionals, soil/foundation engineers, laboratory specialists, materials technicians, ICC-certified inspectors, NICET-certified technicians, and AWS-certified welding inspectors. NOVA's facilities include AASHTO-accredited laboratories in soils, concrete, aggregate and hot-mix asphalt testing/inspection. We also have CCRL-inspected laboratories for concrete sampling, curing, and testing. NOVA will continue to expand its reach and reputation as a leader in the testing, inspection, and consulting fields with a strong legacy of quality and integrity by promoting our best internal resources and recruiting a diverse culture of valued and exceptional talent.

Alliance is the largest exclusive air emissions stack testing services company in the United States. Alliance Emissions Monitoring (AEM) is our Leak Detection and Repair (LDAR) division. Alliance Technical Group is filling a Leak Detection Technician position. As a Leak Detection Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. This job will be a combined local day and some overnight travel reporting to our clients in areas in AL and GA, but potentially TN and MS as well.. We offer a pay range of $50K to $60K with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! Summary/Objective The Compliance Specialist will be responsible for routine LDAR and SPCC inspections, client interaction, routine reports, updating plans and drawings, communications with manager, COMs calibration, COMs technical assistance, and special projects as assigned. Essential Functions Conduct routine OVA and Method 21 LDAR inspections at a variety of industrial facilities. Conducting routine SPCC inspections at a variety of industrial facilities. Writing reports using Microsoft word and excel, generating power point presentation, utilizing Vizio to update facility schematics. Assisting in the peer review process with other team members. Conducting inventories for SPCC. Assists with communications between Alliance team members and clients. Conduct COMs monitor calibrations. Responds to COMs client needs for afterhours over the phone assistance and possible emergency call out nights and weekends. Attends safety training and incorporates safety into all job performance areas. Maintain knowledge and fluency with current and changing regulatory laws for the projects managed. Performs other job-related duties as assigned. Supervisor Responsibilities No supervisory responsibilities; may provide guidance to other team members/individuals. Required Qualifications EDUCATION REQUIREMENT - High School Diploma or GED; bachelor's degree or college background in environmental science recommended/preferred. 5+ years of testing experience, including auditing experience. Previous LDAR and LDAR database experience is preferred. Use of MS Office (Word, Excel, Outlook, Vizio), Adobe Products, and tools or equipment requiring a high degree of dexterity. Industry knowledge, with strong mechanical aptitude. Use of basic office equipment: scanner, copier, and PC. Valid driver's license. The ability to obtain a Transportation Workers Identification Credential (TWIC) card may be required. Knowledge, Skills & Abilities Good written and vocal communication skills (Internally and with Clients and Regulators) Professional appearance and behavior. Maintain a positive attitude with the ability to multi-task and work well in groups or as part of a team. Ability to work safely in an industrial environment and office environment. Work Environment While performing the duties of this job, the team member may travel extensively to industrial work sites and be required to deliver results on strict deadlines. Overnight travel may be required based on the location the position is filled. Work may be performed in hazardous or extreme working conditions, and work from heights. Physical Demands Position requires constant work whether directly working on a project or behind the scenes preparing for one. Entails physical demands of testing, along with the mental stress of balancing personal issues with the amount of travel required. Regular use of the telephone and e-mail for communication is essential. Sitting for extended periods. Hearing and vision within normal ranges is helpful for normal conversations, to receive ordinary information and to prepare or inspect documents. While performing the duties of this job, good manual dexterity for the use of common office equipment such as computer terminals, calculators, smart devices, and copiers is needed. When traveling and on job sites, employees may occasionally be exposed to extreme environmental conditions or industrial hazards, including extreme temperatures, humidity, noise, vibration, atmospheric conditions, etc. Position involves physical activity up to and including moderately heavy work. Position constantly involves walking, standing, and lifting up to 30 pounds. Position frequently involves carrying, crouching, kneeling, pushing, pulling, climbing, handling, grasping, feeling, and other repetitive motions. The position involves frequent exposure to heights and requires climbing stairs and ladder. Position requires ability to hear, talk, and communicate regularly. Travel Varies based on project scope but may require travel up to 50% of the time. Depending on the assignment and the remoteness of the site, may require a greater level of travel and travel on weekends. Other Duties Please note this job description is intended to describe the general nature and level of work performed by team members assigned to this position. It is not designed to contain or be interpreted as a comprehensive list of all duties, responsibilities, and qualifications. Additional job-related duties may be assigned. Alliance reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Alliance is the largest exclusive air emissions stack testing services company in the United States. Alliance Emissions Monitoring (AEM) is our Leak Detection and Repair (LDAR) division. Alliance Technical Group is filling a Leak Detection Technician position. As a Leak Detection Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. This job will be a combined local day and some overnight travel reporting to our clients in areas in AL and GA, but potentially TN and MS as well.. We offer a pay range of $50K to $60K with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! Summary/Objective The Compliance Specialist will be responsible for routine LDAR and SPCC inspections, client interaction, routine reports, updating plans and drawings, communications with manager, COMs calibration, COMs technical assistance, and special projects as assigned. Essential Functions Conduct routine OVA and Method 21 LDAR inspections at a variety of industrial facilities. Conducting routine SPCC inspections at a variety of industrial facilities. Writing reports using Microsoft word and excel, generating power point presentation, utilizing Vizio to update facility schematics. Assisting in the peer review process with other team members. Conducting inventories for SPCC. Assists with communications between Alliance team members and clients. Conduct COMs monitor calibrations. Responds to COMs client needs for afterhours over the phone assistance and possible emergency call out nights and weekends. Attends safety training and incorporates safety into all job performance areas. Maintain knowledge and fluency with current and changing regulatory laws for the projects managed. Performs other job-related duties as assigned. Supervisor Responsibilities No supervisory responsibilities; may provide guidance to other team members/individuals. Required Qualifications EDUCATION REQUIREMENT - High School Diploma or GED; bachelor's degree or college background in environmental science recommended/preferred. 5+ years of testing experience, including auditing experience. Previous LDAR and LDAR database experience is preferred. Use of MS Office (Word, Excel, Outlook, Vizio), Adobe Products, and tools or equipment requiring a high degree of dexterity. Industry knowledge, with strong mechanical aptitude. Use of basic office equipment: scanner, copier, and PC. Valid driver's license. The ability to obtain a Transportation Workers Identification Credential (TWIC) card may be required. Knowledge, Skills & Abilities Good written and vocal communication skills (Internally and with Clients and Regulators) Professional appearance and behavior. Maintain a positive attitude with the ability to multi-task and work well in groups or as part of a team. Ability to work safely in an industrial environment and office environment. Work Environment While performing the duties of this job, the team member may travel extensively to industrial work sites and be required to deliver results on strict deadlines. Overnight travel may be required based on the location the position is filled. Work may be performed in hazardous or extreme working conditions, and work from heights. Physical Demands Position requires constant work whether directly working on a project or behind the scenes preparing for one. Entails physical demands of testing, along with the mental stress of balancing personal issues with the amount of travel required. Regular use of the telephone and e-mail for communication is essential. Sitting for extended periods. Hearing and vision within normal ranges is helpful for normal conversations, to receive ordinary information and to prepare or inspect documents. While performing the duties of this job, good manual dexterity for the use of common office equipment such as computer terminals, calculators, smart devices, and copiers is needed. When traveling and on job sites, employees may occasionally be exposed to extreme environmental conditions or industrial hazards, including extreme temperatures, humidity, noise, vibration, atmospheric conditions, etc. Position involves physical activity up to and including moderately heavy work. Position constantly involves walking, standing, and lifting up to 30 pounds. Position frequently involves carrying, crouching, kneeling, pushing, pulling, climbing, handling, grasping, feeling, and other repetitive motions. The position involves frequent exposure to heights and requires climbing stairs and ladder. Position requires ability to hear, talk, and communicate regularly. Travel Varies based on project scope but may require travel up to 50% of the time. Depending on the assignment and the remoteness of the site, may require a greater level of travel and travel on weekends. Other Duties Please note this job description is intended to describe the general nature and level of work performed by team members assigned to this position. It is not designed to contain or be interpreted as a comprehensive list of all duties, responsibilities, and qualifications. Additional job-related duties may be assigned. Alliance reserves the right to amend and change responsibilities to meet business and organizational needs as necessary with or without notice. Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Are you tired of technician or maintenance jobs that don't offer you the career growth you are looking for? Do you want a job that offers more stability than turnaround work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $20.00/hr with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Test Stand Operator will be responsible for testing Sun Hydraulics' high-performance cartridge valves through documented test procedures ensuring functionality of valves and adherence to engineering specification. Duties/Responsibilities: * Understanding how to retrieve and interpret a blueprint drawing * Understanding of 5S principles * Issuing repair slips for valves that fail testing * Identifying non-conforming parts * Perform basic testing and setup procedure of different products * Daily preventative maintenance of test stand such as checking oil levels, changing filters, checking connections for leaks, and housekeeping of working are * Developing knowledge of Sun product lines and learning how to test and setup more complex valve models * Communicating progress of incomplete work orders and issues to next shift Required Skills/Abilities: * Willingness to learn and grow through Sun Hydraulics * Ability to diagnose minor mechanical issues * Team player mentality * Excellent attention to detail * Positive attitude * Ability to function in a fast-paced manufacturing environment * Ability to prioritize work orders Education and Experience: * High school diploma or equivalent is preferred * Car maintenance experience is a plus * Manufacturing experience is a plus Physical Requirements: * Prolonged periods of standing * Prolonged period of sitting * Ability to lift 50 pounds at times

The Test Stand Operator will be responsible for testing Sun Hydraulics' high-performance cartridge valves through documented test procedures ensuring functionality of valves and adherence to engineering specification. Duties/Responsibilities: * Understanding how to retrieve and interpret a blueprint drawing * Understanding of 5S principles * Issuing repair slips for valves that fail testing * Identifying non-conforming parts * Perform basic testing and setup procedure of different products * Daily preventative maintenance of test stand such as checking oil levels, changing filters, checking connections for leaks, and housekeeping of working are * Developing knowledge of Sun product lines and learning how to test and setup more complex valve models * Communicating progress of incomplete work orders and issues to next shift Required Skills/Abilities: * Willingness to learn and grow through Sun Hydraulics * Ability to diagnose minor mechanical issues * Team player mentality * Excellent attention to detail * Positive attitude * Ability to function in a fast-paced manufacturing environment * Ability to prioritize work orders Education and Experience: * High school diploma or equivalent is preferred * Car maintenance experience is a plus * Manufacturing experience is a plus Physical Requirements: * Prolonged periods of standing * Prolonged period of sitting * Ability to lift 50 pounds at times

The Test Stand Operator will be responsible for testing Sun Hydraulics' high-performance cartridge valves through documented test procedures ensuring functionality of valves and adherence to engineering specification. Duties/Responsibilities: * Understanding how to retrieve and interpret a blueprint drawing * Understanding of 5S principles * Issuing repair slips for valves that fail testing * Identifying non-conforming parts * Perform basic testing and setup procedure of different products * Daily preventative maintenance of test stand such as checking oil levels, changing filters, checking connections for leaks, and housekeeping of working are * Developing knowledge of Sun product lines and learning how to test and setup more complex valve models * Communicating progress of incomplete work orders and issues to next shift Required Skills/Abilities: * Willingness to learn and grow through Sun Hydraulics * Ability to diagnose minor mechanical issues * Team player mentality * Excellent attention to detail * Positive attitude * Ability to function in a fast-paced manufacturing environment * Ability to prioritize work orders Education and Experience: * High school diploma or equivalent is preferred * Car maintenance experience is a plus * Manufacturing experience is a plus Physical Requirements: * Prolonged periods of standing * Prolonged period of sitting * Ability to lift 50 pounds at times

Test Operator - Weekend Shift (Durham, NC) Shift: Saturday & Sunday, flexible 8-12 hours per day (day or night) Pay: $17-$19/hour DOE Position OverviewGraham Personnel Services is assisting a client in Durham, NC fill a Weekend?Shift Test Operator to support testing and quality assurance on semiconductor products. This role involves running test equipment, performing inspections, communicating with team members, and ensuring accurate documentation. The ideal candidate is dependable, detail?focused, and able to work independently over weekend shifts. Key Responsibilities• Test product primarily using established procedures and quality standards.• Operate and monitor semiconductor test equipment and handlers.• Perform hand?testing and support engineering activities as needed.• Document test results, equipment status, and production activity accurately.• Communicate via cell phone, email, and Microsoft Teams.• Maintain a clean, safe, and organized work area. Required Qualifications• Ability to communicate effectively across phone, email, and Teams.• Basic MS Office skills; Excel knowledge is a plus.• Strong attention to detail and accuracy.• Must be reliable and available for weekend?only shifts. #PROF26

Mayvin is seeking a highly skilled Electronic Warfare (EW) Radar Subject Matter Expert (SME) to provide technical expertise and operational insight in support of U.S. Special Operations Command (USSOCOM) at Ft. Bragg, NC. The position applies in-depth knowledge of radar systems, radar signal processing, and electronic warfare tactics to advance mission-critical programs. This position requires extensive hands-on experience with radar systems, electronic countermeasures (ECM), and counter-radar operations to ensure survivability and mission success across multi-domain environments. Must be a U.S. Citizen. Must have an active Top Secret clearance. Responsibilities: Lead and oversee all aspects of COMINT and EW mission planning and execution Direct advanced operations to disrupt and exploit enemy communications and electronic systems Manage tactical deployment of airborne EW assets to deny and degrade adversary C2 and air defense networks Execute detailed mission planning integrating intelligence, EW effects, and multi-domain coordination Synchronize electronic attacks with joint air, ground, and maritime operations, including SEAD missions Prepare intelligence-driven mission plans, configure EW systems, and deliver comprehensive crew briefings Provide clear, actionable communication across leadership channels and external command networks Supervise and mentor EW teams in executing offensive electronic attack and counter-information operations Develop, test, and implement new TTPs to enhance EW effectiveness against evolving radar and datalink threats Conduct in-depth signal analysis to identify, track, and counter electronic threats in the battlespace Advise leadership on EW capability gaps, material requirements, and DoW acquisition processes Qualifications Bachelor's degree in engineering, Physics, Mathematics, or a related technical field; Master's preferred Minimum of 16 years of experience in Electronic Warfare with specific emphasis on radar systems Experience with DoW and SOF requirements development processes (JCIDS and SOFCIDS) Familiarity with Program and Project Management methodologies and best practices Experience with EW modeling and simulation tools, threat radar analysis, and countermeasure development Familiarity with U.S. and foreign radar/EW systems, doctrine, and operational employment Strong technical writing and presentation skills for senior-level decision makers About Mayvin Mayvin offers our employees an innovative culture, excellent benefits and amenities, an inclusive work environment, ongoing career development, and recognition and rewards to honor hard work. Most importantly, our employees have a voice and are heard; we treat our employees with unwavering dignity and respect. Mayvin is dedicated to protecting the interests of the United States. We made a commitment to deliver unparalleled service to serve the interests of national security. Come join us in tackling our nation's hardest problems in a place where #PeopleMatter #ReimagineYourMission.

The Technical Engineer JNY provides engineering and technical execution support to the design, integration, testing, fielding, and sustainment of Training Aids, Devices, Simulators, and Simulations (TADSS). The individual applies technical expertise to ensure systems meet operational training requirements, technical specifications, and lifecycle performance objectives. Responsibilities include supporting engineering analyses of TADSS capabilities; assisting with development and review of technical requirements, specifications, interface control documents, and system documentation; and supporting system integration activities across hardware, software, networks, and training enablers. The Technical Engineer participates in technical interchange meetings, design reviews, and working groups to identify risks, resolve issues, and ensure technical alignment with objectives. Additional duties include supporting test and evaluation activities; assisting with data collection, analysis, and reporting; supporting configuration and change management activities; and contributing to development of technical reports, briefings, and acquisition artifacts. The role collaborates closely with systems engineers, test engineers, military doctrine analysts, acquisition analysts, logisticians, and leadership to ensure technical solutions effectively support Army training outcomes. The Technical Engineer provides practical, hands-on engineering insight and recommendations to improve system performance, interoperability, maintainability, and training effectiveness across portfolios. Required Education * Bachelor's degree in Engineering, Systems Engineering, Computer Science, Information Technology, or a related technical discipline Required Experience * Minimum of 3 years of experience supporting engineering or technical activities within a DoD, Federal, or defense training environment * Demonstrated experience with: * Technical analysis and system support * Integration or test support for training systems or TADSS * Technical documentation and reporting * Coordination with engineering, acquisition, and program teams * Active Secret Clearance Preferred Qualifications * Familiarity with: * TADSS development, integration, or sustainment * Systems engineering lifecycle processes * Test & Evaluation support for training systems * Prior military or Army training systems experience

Hussey Copper has an opening for an Electromechanical at its Eminence Kentucky facility. The Electromechanical will Plan and perform a range of duties to maintain, service, and repair plant machinery, electrical, and facilities, including a normal range of gas and arc welding, flame cutting and fabrication operations. Duties: Interpret wiring diagrams, manufacturer's installation or service manuals, blueprints, product drawings, plant layouts, order flow and all commonly used documents in the facility Install, maintain, and repair equipment and machines as necessary (such as automatic controls and control panels, power or lighting service lines) with necessary fixtures and components to ensure proper operation Measure, cut, align, thread, and assemble pipe, conduit, PVC (and similar items) for gas, electric, pneumatic, hydraulic, and water process systems Test and inspect fire pumps and associated devices Determine and trace cause of malfunctioning or improper equipment Provide effective service repair and maintenance to electrical and mechanical equipment including rolling mills, furnaces, machine tools, and auxiliary equipment Perform routine maintenance and service duties such as repair and maintain portable power equipment, pumps, compressors, air and hydraulic devices, and other apparatus Change rolls in all types of rolling mills and record rotation procedure Perform routine prescribed duties in lubricating plant machinery and equipment Routinely use a variety of measuring devices including calipers, height gauge, micrometer, chamfer gauge, versa gauge, depth gauge, go/no go gauges, pin gauges, thread gauges, protractor, and tape measure Identify correct tooling needed to produce each component and change out tools as necessary and use standard tools including, but not limited to, deburring tools, power tools and hard tools (regarding preventative maintenance and/or quality issues) Modify machine speed tooling and cutting style to ensure precision accuracy of parts. Oversee process, adjust, and catch errors as they happen and correct as necessary. Operate crane and forklift as needed Experience: High School Diploma/GED Experience with quality measuring devices such as calipers, height gauge, micrometer, chamfer gauge, depth gauge, go/no go gauges, pin gauges, thread gauges, protractor, and tape measures is preferred Where the future is bright! Libertas Copper, LLC, dba Hussey Copper is at the forefront of the electrification of the economy, making life more efficient, safe, enjoyable, and healthy for everyone. As a producer of a critical component of electrical transmission and control equipment, Hussey Copper contributes to powering people's lives today for a better tomorrow. Libertas Copper, LLC, dba Hussey Copper is committed to providing Equal Employment Opportunities (EEO) without regard to race, color, religion, age, sex, national origin, disability, marital status, veteran status, sexual orientation, genetic information, gender identity and/or expression or any other protected characteristic under the applicable law. Libertas Copper, LLC, dba Hussey Copper exudes the utmost respect to the environment and safety of all individuals, inside and outside of the workplace, by promoting environmental sustainability and regulatory compliance, in regard to all local, state, and federal guidelines.

Hussey Copper has an opening for an Electromechanical at its Eminence Kentucky facility. The Electromechanical will Plan and perform a range of duties to maintain, service, and repair plant machinery, electrical, and facilities, including a normal range of gas and arc welding, flame cutting and fabrication operations. Duties: Interpret wiring diagrams, manufacturer's installation or service manuals, blueprints, product drawings, plant layouts, order flow and all commonly used documents in the facility Install, maintain, and repair equipment and machines as necessary (such as automatic controls and control panels, power or lighting service lines) with necessary fixtures and components to ensure proper operation Measure, cut, align, thread, and assemble pipe, conduit, PVC (and similar items) for gas, electric, pneumatic, hydraulic, and water process systems Test and inspect fire pumps and associated devices Determine and trace cause of malfunctioning or improper equipment Provide effective service repair and maintenance to electrical and mechanical equipment including rolling mills, furnaces, machine tools, and auxiliary equipment Perform routine maintenance and service duties such as repair and maintain portable power equipment, pumps, compressors, air and hydraulic devices, and other apparatus Change rolls in all types of rolling mills and record rotation procedure Perform routine prescribed duties in lubricating plant machinery and equipment Routinely use a variety of measuring devices including calipers, height gauge, micrometer, chamfer gauge, versa gauge, depth gauge, go/no go gauges, pin gauges, thread gauges, protractor, and tape measure Identify correct tooling needed to produce each component and change out tools as necessary and use standard tools including, but not limited to, deburring tools, power tools and hard tools (regarding preventative maintenance and/or quality issues) Modify machine speed tooling and cutting style to ensure precision accuracy of parts. Oversee process, adjust, and catch errors as they happen and correct as necessary. Operate crane and forklift as needed Experience: High School Diploma/GED Experience with quality measuring devices such as calipers, height gauge, micrometer, chamfer gauge, depth gauge, go/no go gauges, pin gauges, thread gauges, protractor, and tape measures is preferred Where the future is bright! Libertas Copper, LLC, dba Hussey Copper is at the forefront of the electrification of the economy, making life more efficient, safe, enjoyable, and healthy for everyone. As a producer of a critical component of electrical transmission and control equipment, Hussey Copper contributes to powering people's lives today for a better tomorrow. Libertas Copper, LLC, dba Hussey Copper is committed to providing Equal Employment Opportunities (EEO) without regard to race, color, religion, age, sex, national origin, disability, marital status, veteran status, sexual orientation, genetic information, gender identity and/or expression or any other protected characteristic under the applicable law. Libertas Copper, LLC, dba Hussey Copper exudes the utmost respect to the environment and safety of all individuals, inside and outside of the workplace, by promoting environmental sustainability and regulatory compliance, in regard to all local, state, and federal guidelines.