Top Building Engineer Skills

Below we've compiled a list of the most important skills for a Building Engineer. We ranked the top skills based on the percentage of Building Engineer resumes they appeared on. For example, 12.3% of Building Engineer resumes contained Hvac as a skill. Let's find out what skills a Building Engineer actually needs in order to be successful in the workplace.

The six most common skills found on Building Engineer resumes in 2020. Read below to see the full list.

1. Hvac

high Demand
Here's how Hvac is used in Building Engineer jobs:
  • Maintained fire control system and provided required mechanical inspections of labs/UPS/PBX/HVAC systems.
  • Provide maintenance and overhaul HVACR systems during their respective non-operating season.
  • Performed start-up and commissioning procedures of various mechanical and HVAC equipment.
  • Monitor building automated HVAC systems and temperature controls.
  • Conducted HVAC inspections and completed masonry assignments.
  • Repair and perform preventive maintenance on general building facilities and electrical, mechanical, HVAC, refrigeration, and communication systems.
  • Performed a variety of repair and maintenance tasks including: carpentry, plumbing, electrical, painting, HVAC and masonry.
  • Perform repairs, building inspections, and diagnostics of all mechanical, electrical, HVAC equipment and operations throughout the complex.
  • Managed the climate control in various downtown Dallas county buildings through the use of HVAC computer application system or manual control.
  • General painting, hanging, and completion of various tenant WO requests for light plumbing, electrical, and HVAC concerns.
  • Performed work associated with the operation and maintenance of Heating Ventilation and Air Conditioning (HVAC) systems and equipment.
  • Monitor and adjust the energy management as well as service the HVAC system(s) and its corresponding components.
  • Performed required duties, including light carpentry, plumbing, grounds maintenance, electrical, HVAC/refrigeration, cable satellite maintenance.
  • Maintained electrical, plumbing and HVAC systems of 500,000 square foot AmeriCredit Operation Center campus in Arlington, Texas.
  • Perform daily inspection of building systems including, but not limited to, fire alarms, HVAC, plumbing.
  • Processed all incoming work orders, Preventive maintenance on HVAC Equipment, Water fountain maintenance and repairs as needed.
  • Maintain the church which included HVAC, the commercial kitchen, and setting up the church for different functions.
  • Work on electrical, mechanical, plumbing, HVAC, and more at the buildings in the office park.
  • Maintain the HVAC, electrical, plumbing, carpentry, flooring, paint, lighting and anything else needed.
  • Make necessary repairs and adjustments to improve the operations of the HVAC, electrical, plumbing equipment and systems.

Show More

2. Boilers

high Demand
Here's how Boilers is used in Building Engineer jobs:
  • Maintain Boilers-Maintain 29 Building Operations-Preventive and Maintenance to all Buildings-Customer Service with Vendors-On Call Maintenance
  • Maintain two Teledyne-Lars continual circulation boilers, perform general plumbing and electrical repairs.
  • Restart steam boilers and equipment after unplanned emergency shutdowns.
  • Maintained firebox low-pressure steam boilers.
  • Operate and maintain chemical levels on two Cleaver Brooks Fire Tube 350 horsepower boilers in a 650 thousand square foot building.
  • Monitored a variety of equipment; such as air handlers and compressors, hot water heaters, boilers, and elevators.
  • Job duties: Operated and maintained high pressure steam boilers, cooling towers, Plant water-treatment and operation of chillers.
  • Maintained all building systems, including HVAC, generators, boilers, CRAC and CRAH units, electrical and plumbing.
  • Performed chemical tests on boilers, chill-water and other related equipment and prepared and documented log sheets and various reports.
  • Operate and maintain two Fulton Electric 300 horsepower boilers in a 750 thousand square foot building, with 692 rooms.
  • Operate a full tier 3 data center including 5, 500 ton chillers, 30 pumps and 3 electric boilers.
  • Worked hands on with building systems including HVAC systems, Water, Fire and Atmospheric Boilers and Steam Distribution systems.
  • Operate and Maintain Boilers, Chillers, Motors and Pumps, VAV's, Gas and Electric Water Heaters.
  • Assist with technical insight in the operation, maintenance, and repair of Boilers, Heat-pumps, and Chillers.
  • Perform repair and maintenance of building systems, including boilers, pumps, chillers, motors, vacuum systems.
  • Worked rotating shift, Checked and took readings on Chillers, Boilers and all equipment pertaining to the hospital.
  • Performed water treatment on boilers, chillers and lab naturalizing systems, handled all tickets for basic plumbing/electrical systems.
  • Document, schedule and perform all necessary preventive maintenance to various equipment including commercial kitchen, laundry and boilers.
  • Performed chemical testing on boiler water to ensure proper oxygen removal and to keep boilers running at optimal level.
  • Operated and maintained high and low-pressure steam boilers, hot water boilers, comfort cooling chiller and refrigeration systems.

Show More

3. Chillers

high Demand
Here's how Chillers is used in Building Engineer jobs:
  • Operated chillers and maintained cooling towers
  • Performed Preventive Maintenance on chillers.
  • Performed preventive and routine maintenance on chillers, rooftop units, package units, storage coolers, and wall-pack units.
  • Work any shift, any building, operating HVAC equipment (roof top units, cooling tower, chillers).
  • Perform daily preventive maintenance on HVAC systems (350 ton chillers), water heaters and domestic water pumps.
  • Operate and maintain hot water boiler and associated pumps, chillers, cooling towers, ventilation and exhaust fans.
  • Operate, log readings and perform maintenance on two 425 ton Carrier Evergreen Screw 23XRV Chillers using R134A.
  • Monitor and maintain central plant operations which include, water chillers, centrifugal pumps, air handling units.
  • Perform annual service work on chillers, cooling towers, and pump systems to optimize operation of systems.
  • Gained hands on experience with HVAC chillers, cooling towers, package, and split system units.
  • Perform daily inspections of all building systems (Cooling Towers, Chillers, AHU, BAS/EMS).
  • Maintain HVAC systems including chillers, pumps, fan motors, and compressors, change filters.
  • Worked on all refrigeration in complex from Chillers, Computer Room Units and Cafeteria Equipment.
  • Troubleshooted AC and packaged units as well as Chillers, Air Handlers and replaced filters.
  • Operated and maintained five Centrifugal Carrier (19C) Chillers, with Hermetic Sealed.
  • Perform preventive maintenance on all equipment including AHU's, CRAH's, & chillers
  • Completed PM'S on four 2500 Ton chillers and monitored all chiller systems.
  • Install, repair and rebuild all motors, pumps, chillers and compressors.
  • Air handlers, chillers, and pumps monitored from building environmental JC85/40 computer.
  • Maintain Heaters, Chillers, Pumps, Fan Coils, AHU and Cooling Towers

Show More

4. Life Safety

high Demand
Here's how Life Safety is used in Building Engineer jobs:
  • Provide security cleared escort and supervision of approved vendors for above building standard repairs and/or life safety testing.
  • Supported timely project fulfillment by maintaining building mechanical, fire/life safety, electrical, and plumbing systems.
  • Monitored computerized building energy and life safety systems.
  • Maintained and operated life safety/fire systems.
  • Fire Life Safety systems are controlled by an addressable fire control system with full interlock to all building HVAC and fans.
  • Have basic understanding of hotel life safety systems (Fire panel, Emergency Generator, Transfer Switch, Sprinkler System).
  • Assist Chief Building Engineer with his operational, supervisory, administrative, financial, training, logistical and life safety tasks.
  • Operated and maintained in cooling, heating, domestic water, plumbing and Life safety systems in a 4.5 mil.
  • Maintain all building systems including HVAC, electrical, plumbing, emergency power system, life safety systems, etc.
  • Possess knowledge of all mechanical, plumbing, electrical, life safety, emergency generators, UPS systems, etc.
  • Schedule and perform preventive maintenance on HVAC, plumbing, electrical, security, and fire and life safety systems.
  • Make repairs to and maintain Life Safety, and Facilities automated systems, including Lighting Control and Design systems.
  • Obtained bids for all vendor contracts including fire/life safety system, building security, parking and tenant improvement construction.
  • Promote a safe working environment for all employees by following the life safety and emergency program as needed.
  • Coordinated work with vendors and customers on fire life safety, plumbing, elevator, roofing and electrical.
  • Coordinate quarterly and Annual Inspections for Fire life safety systems and made necessary repairs to keep compliance.
  • Worked directly with contracted and government safety inspectors to ensure proper and up to date life safety.
  • Account management of safety program, contractor training, SDS records, and life safety program.
  • Performed weekly and monthly testing of buildings life safety systems including fire pump and emergency generators.
  • Utilize fire alarm and life safety systems at assigned property and make adjustments as needed.

Show More

5. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Building Engineer jobs:
  • Developed and implemented preventative maintenance program
  • Provided mechanical, building, and preventative maintenance expertise during shift operations, advancing through a series of increasingly responsible positions.
  • Utilized existing and designed and implemented preventative maintenance systems to cover mechanical equipment and systems associated with properties in my care.
  • Manage preventative maintenance of critical equipment in the Western Region portfolio to abide by contractual obligations.
  • Perform facility preventative maintenance repairs and inspections with commendations from staff management and in house clients.
  • Maximize 6 facilities aesthetically, structurally, & functionally through preventative maintenance and cost effective improvements.
  • Recognized for efficiency in troubleshooting, diagnosing, repairing, and performing preventative maintenance on buildings.
  • Performed preventative maintenance and inspection on general equipment and mission critical systems in data center.
  • Monitor all work order tracking and completion, Purchasing of supplies and Preventative Maintenance scheduling/completion.
  • Implemented preventative maintenance program and inspected guest rooms and public spaces for necessary maintenance.
  • Extended equipment usage by performing preventative maintenance, while sustaining a preventative maintenance program.
  • Helped establish preventative maintenance programs and developed new cost effective strategies in refining systems.
  • General carpentry, plumbing, lighting and electrical preventative maintenance for entire facility.
  • Provided preventative maintenance and kept clear records to prevent breakdowns in hotel accommodations.
  • Perform Preventative Maintenance and Discretionary Work Orders within guidelines for maintenance and documentation.
  • Perform quarterly, semiannual, and annual preventative maintenance on various mechanical equipment.
  • Monitored preventative maintenance of building automation systems and fire and life safety systems.
  • Followed inspection and service procedures outlined in preventative maintenance and loss control programs.
  • Performed preventative maintenance duties throughout the building ensuring proper and efficient equipment operation.
  • Ensured all machinery met or exceeded their life expectancy though proper preventative maintenance.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Building Maintenance

high Demand
Here's how Building Maintenance is used in Building Engineer jobs:
  • Service and maintain air conditioning, heating and refrigeration equipment, plumbing and electrical repair * Responsible for general building maintenance
  • General building maintenance-Oversee capital improvements-Responsible for 18 locations in the Omaha metro area-Maintain fire suppression and HVAC systems
  • Utilized various types of computer software and building intelligence systems for building maintenance and security.
  • General building maintenance which included electrical, plumbing and air conditioning servicing and maintaining.
  • Perform building maintenance and everyday repairs for a retail pharmaceutical customer.
  • General building maintenance, including interior and exterior.
  • Performed minor building maintenance projects for building engineer.
  • Maintained inventory and building maintenance supplies monthly.
  • Handled miscellaneous on-site building maintenance and repairs of plumbing, electrical painting and heating ventilation and air conditioning (HVAC).
  • Assist in all aspects of building maintenance and assist lead engineers in performing duties * Have knowledge of audio/video equipment.
  • Preformed building maintenance; replace building air filter, lighting, Plumbing, office set ups, and painting
  • Ensured property was in excellent condition at all times which included all aspects of building maintenance and upkeep.
  • Perform building maintenance on all facets of plumbing, electrical that deals with operation of the building.
  • Maintained commercial buildings including HVAC, electrical, energy management systems, plumbing, general Building Maintenance.
  • General building maintenance including, but not limited to electrical, plumbing, painting, carpentry.
  • Worked at various buildings in the area, performing routine building maintenance and house calls.
  • Responded to building maintenance calls and prioritize severity of calls using maintenance program 'HOTSOS'.
  • Repair and Install Electrical and Plumbing Equipment and involved in all aspect of Building Maintenance.
  • Performed plumbing, electrical and HVAC, general building maintenance requirements of the building.
  • Crew member in charge of building maintenance in retail stores throughout Puget Sound area.

Show More

7. Customer Service

high Demand
Here's how Customer Service is used in Building Engineer jobs:
  • Gathered data relevant to historical processes, and designed unified approach to release management for new customer service application.
  • Provide excellent customer service by prioritizing customer trouble tickets and guaranteeing quick and professionally made repairs.
  • Delivered high levels of quality and competitiveness to a diverse client base through exemplary customer service.
  • Coordinate contractors for services inside residences to avoid inconvenience and deliver luxury level customer service.
  • Provide excellent customer service and effectively interact with tenants, suppliers and other technicians.
  • Performed general upkeep and maintenance of an 82-condo complex and provided excellent customer service
  • Demonstrated exceptional customer service, received numerous high ratings for customer service.
  • Commended for excellent consultative customer service skills on performance reviews.
  • Provided superior customer service for all personnel and external partners.
  • Position is heavily focused on customer service.
  • Demonstrate a professional customer service approach.
  • Provided tenants with exceptional customer service.
  • Delivered a superior customer service experience.
  • Ensured exceptional customer service is provided.
  • Excelled in customer service by addressing the concerns and maintenance needs of residents in a friendly and professional manner.
  • Establish and promote positive tenant relationships via proactive communication, routine follow-up and a high level of customer service.
  • Received customer service award for being courteous and pleasant to customers within six months of employment.
  • Assist other employees with their assigned duties such as shipping and receiving or customer service.
  • Maintained great customer service with tenant agencies to cultivate rapport and drive long-term relations.
  • Used communication skills while giving highly rated customer service to building tenants and contractors.

Show More

8. ANT

high Demand
Here's how ANT is used in Building Engineer jobs:
  • Responded to tenant requests and maintained understanding of functionality of Data Center environment systems, BMS protocols and procedures.
  • Demonstrated exemplary customer and staff relations while working closely with tenants, vendors and property management staff.
  • Completed tenant work orders and provided information necessary to maintain complete and accurate maintenance records.
  • Involved in tenant improvement Project Management Instrumental in implementing an automated Preventive Maintenance program.
  • Provided assistant to team members in J2EE/.NET build/packaging and coordinating with offshore/onshore.
  • Monitored semi-hermetic refrigerant compressors, centrifugal chillers, and DX carrier units.
  • Maintain efficient operation of all mechanical systems and tenant services.
  • Monitored, maintained chiller and boiler plants for operational readiness.
  • Investigated and resolved tenant complaints with efficiency and courtesy.
  • Maintained proper certifications for boiler and refrigerant equipment.
  • Maintained good business relationship with contractors and tenants.
  • Implemented reporting for action items relevant to CodeFlow.
  • Negotiated all facility service contracts after warranty terms.
  • Coordinated scheduled move-out's with tenants/business owners.
  • Communicate with property management regarding tenants issues.
  • Fulfilled responsibilities related to tenant service calls.
  • Handled all communications between tenants and management.
  • Operated chillers and associated chiller plant equipment.
  • Provided outstanding customer service to tenants.
  • Designed, wrote and built deployment using Ant/ Shell scripting and automate overall process using Subversion, Perforce and Anthill pro.

Show More

9. Continuous Integration

high Demand
Here's how Continuous Integration is used in Building Engineer jobs:
  • Scheduled automated nightly builds using Hudson and maintained Continuous integration effort with Hudson along with scheduled builds.
  • Created continuous integration process using custom scripts to automatically compile and deploy builds on demand.
  • Led Bamboo continuous integration server installation and configuration for all SVN Repositories.
  • Carried Deployments and builds on various environments using continuous integration tool.
  • Configured Continuous Integration and Continuous delivery model for enterprise changes.
  • Experienced in setting up Continuous Integration environment using Bamboo.
  • Automated testing and continuous integration using Jet Brains TeamCity.
  • Installed, Configured and Administered Hudson/Jenkins Continuous Integration Tool.
  • Evaluated build automation and continuous integration products and strategies.
  • Used Jenkins/Hudson to perform single click Continuous Integration Automation.
  • Configured continuous integration build system using Jenkins and Hudson.
  • Introduced and responsible for Jenkins continuous integration environment.
  • Implemented Continuous integration and continuous deployment using Jenkins.
  • Operated and maintained a Jenkins Continuous Integration environment.
  • Implemented Hudson/Jenkins as the continuous integration tool.
  • Installed and Configured Jenkins for Continuous Integration.
  • Installed/Configured/Managed Stash, Bamboo Continuous Integration Automation.
  • Worked on continuous Integration tools Jenkins
  • Configured Hudson for Continuous Integration.
  • Used the continuous Integration tools such as Jenkins for automating the build processes and Configured Jenkins with plugins and created jobs.

Show More

10. Building Automation System

high Demand
Here's how Building Automation System is used in Building Engineer jobs:
  • Operated and monitored the Building Automation System taking corrective action when necessary.
  • Operated Building Automation System to maintain tenant comfort and promote system efficiency.
  • Operate and monitor Automated Logic building automation system.
  • Monitor Electrical and Data on Building Automation System.
  • Operate and maintain building automation system for laboratories, offices, and animal areas (GLP, GMP, GXP).
  • Implemented expert knowledge of Siemens Building Automation System for NIH laboratory research studies to meet AAALAC standards for laboratory animal care.
  • Operated all electrical, mechanical, HVAC and fire alarm control system Monitored and Interpreted data from building automation systems.
  • Operate HVACS system and make adjustments to building automation systems (BAS or EMS or ATC).
  • Monitored building temps and chiller plant equipment and cooling towers on our Building automation system.
  • Use the Angus Anywhere work order system, Niagara and I net Building Automation Systems.
  • Manage all facets of Building Automation Systems (BAS) for a 3-4 million sq.ft.
  • Monitor building automation systems; make program adjustments and set point changes as needed.
  • Maintained Building Automation System (BAS) to ensure energy conservation and occupant comfort.
  • Map all points installed back to the building automation system.
  • Implement expert knowledge of Siemens Building Automation System.
  • Experience with Siemens Insight Building Automation Systems.
  • Set schedule for building automation system.
  • Maintain commercial kitchen appliances Operate and monitor Siemens building automation system.
  • Monitor, maintain and repair Circon integrated building automation systems.
  • Experience with Andover Continuum building automation system.

Show More

11. Air Compressors

high Demand
Here's how Air Compressors is used in Building Engineer jobs:
  • Maintained and repaired air compressors, cooling towers, changing fluorescent lights, replaced air filters chilled water pumps etc.
  • Assisted in maintaining HVAC equipment such as chillers, cooling towers, air handlers, ventilators and air compressors.
  • Maintained and repaired A/C and Heating equipment, Air compressors, Chillers, Boiler, Pumps and motor.
  • Worked on steam vacuums, pumps, motors, condenser return pumps and worked on air compressors.
  • Maintain parking garage - dry fire sprinkler system including air compressors and drip legs.
  • Performed maintenance checks and recorded readings for boilers and air compressors.
  • Worked on pneumatic controls, maintaining VAV and associated air compressors.
  • Repaired air compressors, chillers, ovens and exhaust fans.
  • Maintain two house air compressors for pneumatic systems.
  • Blow down air compressors every shift.
  • Operated and maintained Asurion corporate headquarters power plant to include boilers, chillers, cooling towers and air compressors.
  • Worked on large Air Compressors (Worthington), refrigeration from comfort cooling to cafeteria equipment.
  • Maintain and operated boilers, air compressors,HV equipment, and exhaust fans.
  • Repair exhausted fans, vav boxes, air compressors, and baseboard heating.
  • Clean and maintain the air handlers, air compressors.
  • Sole servicer for air compressors of the building.

Show More

12. Troubleshoot

high Demand
Here's how Troubleshoot is used in Building Engineer jobs:
  • Included implementation of preventive maintenance program (DataStream MP-2), equipment maintenance troubleshooting and electrical repair, installation and maintenance.
  • Provided property preventive maintenance, electrical repair, HVAC maintenance/troubleshooting, construction, plumbing, custom carpentry and renovations.
  • Supported day to day activities by performing troubleshooting, deviation investigations and coordinating maintenance activities.
  • Demonstrated ability to troubleshoot creatively, solve problems effectively, and make informed decisions.
  • Project Management: Integral participant in troubleshooting of complex repair requests.
  • Performed troubleshooting on complex installations and operational issues and provided solutions.
  • Limited production down time by troubleshooting and repairing system complications.
  • Provided troubleshooting for complex mechanical air conditioning and refrigeration equipment.
  • Perform and/or oversee electrical and plumbing repair and troubleshooting.5.
  • Saved company money by troubleshooting and identifying mechanical issues.
  • Facilitate troubleshooting for Network Services and Rapid Response Teams
  • Performed troubleshooting of production line and packaging equipment.
  • Installed Build Forge and performed troubleshooting during installation.
  • Maintained, troubleshoot and repair infrastructure equipment.
  • Performed electrical and plumbing repair troubleshooting.
  • Performed troubleshooting in steam radiators.
  • Perform troubleshooting of high voltage and low voltage equipment, AC/DC drives, PLC controls and Hydraulic, Pneumatic systems, Plumbing
  • Experience includes various installations, troubleshooting, and repairs relating to plumbing, electrical, building structures, and video equipment.
  • Maintain, troubleshoot, and make all necessary repairs from filter changes to replacing compressors to keep units at peak efficiency.
  • Assumed responsibility for all in house HVAC troubleshooting, maintenance and repairs which saved the company over $200,000 per year.

Show More

13. Maven

high Demand
Here's how Maven is used in Building Engineer jobs:
  • Migrated of ant based traditional projects into maven projects and resolved dependencies for ant based projects using maven-ant-tasks.
  • Design Maven build framework for e-commerce applications based on their requirements.
  • Managed Maven project dependencies by creating parent-child relationships between Projects.
  • Used Maven build for packaging the source code and used Cruise Control for automation and CI related build and deploy activities.
  • Implemented the Continuous integration process with Jenkins and integrated tool with Ant and Maven as per the schedule the builds.
  • Worked with MAVEN for building the application, has written MAVEN scripts and shell scripts to automate the build process.
  • Developed build and deployment scripts using Maven as build tools in Jenkins to move from one environment to other environments.
  • Automated Maven, Ant (Java, Flex code) with VisualBuildpro and then fully integrating it in Cruise Control.
  • Researched and implemented code coverage and unit test plug-ins like Find Bugs, Check style and PMD with Maven/Hudson.
  • Used Maven as build tool on Java projects for the development of build artifacts on the source code.
  • Used maven profiles to create different builds so that it can be released early and released often-agile/extreme programming.
  • Used Maven as a build automation tools for downloading and configuring JAR files automatically through maven dependencies.
  • Ported old builds from Ant to Maven for Java builds and documented the process for future reference.
  • Developed build and Deployment Scripts using ANT and MAVEN as build tools in Jenkins to between environments.
  • Build and Release management of Java code developed in various RSA applications using Clear case and Maven.
  • Involved in understanding the various technologies (Tuxedo, Maven) that are used in the project.
  • Converted and automated builds using Maven and Ant and scheduled automated nightly builds using Hudson.
  • Experienced in building Java application using make files (Apache Ant utility), Maven.
  • Set up branching executors in Jenkins for build release team to create maven based branches.
  • Used Maven as a dependency management tool to manage all the dependencies that are required.

Show More

14. VAV

high Demand
Here's how VAV is used in Building Engineer jobs:
  • Conducted adjustments on variable air to volume boxes (VAV), variable frequency drives (VFD), cooling towers.
  • Filter changing, Condenser cleaning, bearings greasing, Coil cleaning, and cooling tower cleaning, VAV boxes maintenance.
  • Changed belts and filters on roof top units, replaced coils in VAV boxes as well as the VAV boxes.
  • Monitor, calibrate VAV/CAV boxes to work with actuators, controllers and sensors via JCI DDC Building Automated System.
  • Perform a daily inspection and log of a CSC, PIU, VAV, and minor service and adjustments.
  • Maintain 15 ton mammoth package units, operate BMS system, fan power box units and VAV's.
  • Operate and maintain VAV s and air handler units as well as change out dampers and water valves.
  • Calibrate VAV box T-Stats and maintaining main air compressor for the VAV box air supply pressure.
  • Upgrade the quality of VAV boxes, fan power boxes making them more efficient operation.
  • Monitored and serviced VAV, PIU, pressure regulators, pneumatic and electronically controlled systems.
  • Replaced malfunctioning pneumatic dampers and controls in variable air volume (VAV) units.
  • Monitor and PM 4 rooftop 100% outside air units and VAV systems.
  • Calibrate Pneumatic T Stats and controllers for VAV's with ReHeat coils.
  • Replaced thermostats, VAV models, heater coils, and wiring.
  • Installed wiring and heaters in VAV units to raise space temperatures.
  • Changed VAV controllers and DDC controllers for heating and air conditioning.
  • Performed repairs and maintenance on VAV's and electrical equipment.
  • Assist in the routine maintenance of the Titus VAV box.
  • Replace burned heat coils that are in VAV boxes.
  • Schedule PM's for VAV system in business suites.

Show More

15. Linux

average Demand
Here's how Linux is used in Building Engineer jobs:
  • Performed Linux system administration in Ubuntu tasks.
  • Decommissioned Windows and Linux Servers.
  • Created release/deploy packages with InstallShield Package for the Web and RedHat Package Manager (RPM) for Linux builds.
  • Loaded Operating systems based on specific customer's needs spanning operating systems including; Linux, Windows and Custom.
  • Key Contributions:* Worked on supporting an application development environment compromised of Red Hat Linux 6/5 servers.
  • Learned how to design and deploy Virtual Machines to the clients which are Windows or Linux based.
  • Reviewed Unix/Linux/Oracle batch job logs and provide solution or escalate to the concerned team.
  • Contributed black box and white box testing of an embedded Linux consumer device.
  • Build Red Hat Linux 6.8 servers which includes installation, testing, tuning.
  • Patch management utilizing SpaceWalk (Linux) and LabTech (Windows).
  • Serve as backup builder for a set of Linux based products.
  • Worked as a partial system administrator for Linux and Windows machines.
  • Automated deployment of software and provisioning of Linux hosts using Chef.
  • Administered LINUX & Windows server environments, modified & executed scripts.
  • Provided support and maintenance to all new build Linux servers.
  • Worked on Unix/Linux Environments and for deploying our environment.
  • Performed Linux kernel upgrades and applying errata updates.
  • Installed Red Hat Linux, tweaked network settings.
  • Enhanced and optimized performance on Linux Kernel Driver.
  • Maintained all the Linux environments for deployments.

Show More

16. Air Handlers

average Demand
Here's how Air Handlers is used in Building Engineer jobs:
  • Monitor building environmental conditions, including adjusting thermostats, air handlers, cooling towers terminal units and mixing boxes.
  • Performed preventive maintenance on air handlers, refrigeration and fan units (exhaust, supply and return).
  • Maintained numerous chilled water air handlers to include cleaning cooling coils, changing air filters and fan belts.
  • Serviced RTU's, Air handlers, VAV's with coordination of building HVAC Company Calvert Controls.
  • Cleaned induction units and replaced filters on air handlers on a quarterly basis.
  • Maintained spray pumps, circulating pumps, cooling tower fans and air handlers.
  • Replaced belts, filters, bearings and motors on air handlers.
  • Monitored and adjusted air handlers with building automaton by Siemens.
  • Saved over $3K on PM schedules on air handlers.
  • Air Handlers- repair and maintenance.
  • Train and McQuay Air Handlers.
  • Maintain Hvac systems including fan coil, air handlers , package units, split systems, and some chiller systems.
  • Performed routine and emergency work order maintenance on various air handlers, heat exchangers and pumping equipment..

Show More

17. Mechanical Equipment

average Demand
Here's how Mechanical Equipment is used in Building Engineer jobs:
  • Controlled the daily operation of mechanical equipment in regularly assigned buildings remotely and locally through BAS/EMS.
  • Developed scheduled maintenance procedures for all HVAC and related mechanical equipment.
  • Maintained operation of all life safety and mechanical equipment.
  • Maintained heating, ventilation systems, other mechanical equipment.
  • Operate and maintain all electrical and mechanical equipment.
  • Performed preventive maintenance by changing belts and filters, adjusting, cleaning, inspecting, oiling and greasing all mechanical equipment.
  • Performed preventive maintenance on all the mechanical equipment that support the building and can read and understand building blue prints.
  • Maintain on-site, daily, weekly and monthly operations logs for all mechanical equipment as they are inspected and tested.
  • Coordinate and observe project system testing for HVAC, mechanical equipment, mechanical piping, electrical panels, and plumbing.
  • Performed all preventive maintenance needs on Mechanical equipment and responded to all work requests in a prompt and timely matter.
  • Conduct morning walk through of building mechanical equipment, cooling towers, booster pumps, valves and Air Handler units.
  • Set up, maintain, and operate mechanical engineering programs for the maintenance and operation of all mechanical equipment.
  • Operate and maintain all mechanical equipment in the facility such as pumps, motor, and fans.
  • Perform Maintenance/Repairs to buildings Motors, Pumps, and Mechanical equipment maintain building and electrical systems.
  • Performed general operation of mechanical equipment HVAC, boilers, compressors vacuum pumps, etc.
  • Assist with rounds routine, record log on boilers and mechanical equipment.
  • Maintain plant logs, files, and appearance of all mechanical equipment.
  • Maintain pools - chemical analysis / maintenance and repair of mechanical equipment.
  • Operate and maintain mechanical equipment at Northern Trust Western Processing Center.
  • Operate and maintain all mechanical equipment in the facility.

Show More

18. Configuration Management

average Demand
Here's how Configuration Management is used in Building Engineer jobs:
  • Interacted with developers and Enterprise Configuration Management Team for changes to best practices and tools to eliminate non-efficient practices and bottlenecks.
  • Performed Change and Configuration Management analysis, design, development, implementation, and administration of client server and web-based applications.
  • Interfaced with software development staff and external customers by functioning as a Configuration Management Administrator for a small project.
  • Utilize industry standards for Engineering design and Construction Process Management, and Infrastructure configuration management and document control.
  • Ensured that customer requirements are implemented and reviews change accounting activity to ensure compliance with configuration management policies.
  • Involved in creating requirements and designs for Configuration Management/Release Engineering systems and implement CM/Release Engineering improvement plans.
  • Support development engineers with Configuration Management issues and assist my seniors and Project Leaders in technical issues.
  • Involved in Software Configuration Management using Subversion for branching source file versions onto committed mainline releases.
  • Provide Build-Deployment and Configuration Management services for multiple, complex application releases across different software products.
  • Developed and implemented an agile SDLC and refinement of the Software Configuration Management infrastructure.
  • Developed standards for Configuration Management including labeling and command line scripts for code extraction.
  • Provide Configuration Management services for 47 mainframe applications of Verizon's Billing system.
  • Provided configuration management support for the customer's software baseline control efforts.
  • Worked with product development teams to develop and enforce configuration management guidelines.
  • Performed in a configuration management and software build scheduling role.
  • Supported System Administration to troubleshoot configuration management and network issues.
  • Released and configuration management and administration using ClearCase and PVCS.
  • Used Microsoft SourceSafe as the software configuration management system.
  • Worked on Configuration management tool Chef for continuous delivery.
  • Served as configuration management representative to the CCB.

Show More

19. Perl

average Demand
Here's how Perl is used in Building Engineer jobs:
  • Developed automated Shell and Perl Scripts, eliminating complicated manual work.
  • Performed Log/Watch/Tour on weekend to ensure building is operating properly.
  • Supervised/monitored the scheduled preventive maintenance works if done properly.
  • Developed Shell/Batch/Perl Scripts for automation purpose.
  • Observed and interpreted readings on gauges and charts, registering various aspects of boiler operations to ensure they are operating properly.
  • Ensured that all the software and hardware components are upgraded properly, and also designed the company's networking policy.
  • Inspected rest rooms, stairwell, and garage for proper lighting, and making sure all doors are working properly.
  • Created and managed Oracle RMAN backup using Bash and Perl scripts to automate jobs and set up and schedule backups.
  • Maintained build scripts and tools (Perl and Visual Basic) under the direction of the Build Engineer.
  • Enforced Software Configuration Management policies through ClearCase triggers written in Perl, in order to meet Audit requirements.
  • Designed and implemented a fully automated Windows build system using DOS batch files, Perl, and MKS.
  • Make periodic inspections to see that all equipment and controls are operating properly and are in good condition.
  • Work with application development teams to ensure that their applications are designed properly for interacting with AWS.
  • Studied the current build and release process and automated the process using Perl script and shell scripts.
  • Generated Ant, Perl&UNIX scripts for build activities in QA, Staging and Production environments.
  • Coordinate with various tradesmen and inspectors to ensure that the project is built properly and to code.
  • Developed numerous Tools in Perl, bash and python to automate the build and release processes.
  • Maintain the multiple buildings I was responsible for, keep maintenance up and equipment working properly.
  • Developed monitoring modules which can act also as a plug-in using Shell, PERL and MySQL.
  • Worked on Ant scripts in building J2EE application and Perl scripts in building C++ application.

Show More

20. Electrical Systems

average Demand
Here's how Electrical Systems is used in Building Engineer jobs:
  • Assisted in performing regular preventive maintenance on all mechanical and electrical systems as directed.
  • Provided campus-wide support and supervision of critical utility electrical systems work.
  • Inspect mechanical and electrical systems routinely.
  • Operate and maintenance and instillation of electrical systems and fixtures up to 460 v. Maintenance installation and repair of mechanical systems.
  • Inspected and performed maintenance and repair on mechanical, security, HVAC, plumbing and electrical systems at multiple commercial properties.
  • Maintained HVAC, plumbing and electrical systems as well as overall appearance of common areas, landscaping and parking lot.
  • Take care of office building's maintenance problems with plumbing, heating, air conditioning and electrical systems.
  • Maintained 125,000sf commercial property including operating and maintaining HVAC, plumbing and electrical systems, and operating EMS.
  • Serviced and maintained the HVAC, plumbing, and electrical systems of commercial buildings throughout the Valley.
  • Perform work orders for tenant maintenance problems with plumbing, heating, air conditioning and electrical systems.
  • Learned the multiple systems for heat and electrical systems and became an expert in the various areas.
  • Service appliances, equipment, K-50, plumbing, electrical systems, etc.
  • Maintain all UPS Equipment & Electrical systems at all facilities.
  • Tested electrical systems to determine voltage, using voltage meter.
  • Analyze electrical systems and implement upgrades to reduce downtime.
  • Maintain all electrical systems to include new construction.
  • Monitored and maintained electrical systems including emergency generators, motors, circuits and switchgears.
  • Repaired and maintained all appliances, mechanical and electrical systems Prepared vacant units for turn over for new tenants.
  • Handle services calls including HVAC, plumbing and electrical systems equipment maintenance.
  • Preform various other repairs on electrical systems (UPS, Switchgear, PDU, lighting.Preform Plumbing system repairs,Employment

Show More

21. SVN

average Demand
Here's how SVN is used in Building Engineer jobs:
  • Managed source control repository in Subversion (SVN) - controlling and monitoring check-in's & create tags for builds.
  • Configure Subversion (SVN) repositories to utilize a post-commit hook which notifies Jenkins that a build needs to start.
  • Configured VPN Tunneling, LDAP authentication for SVN and Certificate Server for secure site and Patches update using binary source.
  • Downloaded open source required and built with archived libraries from SVN to release final tarballs to external vendors.
  • Assisted developers in establishing and applying appropriate branching, labeling/naming conventions using Subversion (SVN) source control.
  • Created Subversion (SVN) post commit hook scripts to generate tickets for naming convention in messages.
  • Trained developers on SVN checkout, adding, editing and committing files following CM best practices.
  • Maintained backups and restore activities for SVN, Hudson using Shell Scripts and scheduled daily.
  • Worked with users to fix the internal errors in SVN repositories that halt the migration.
  • Managed Users and Groups in SVN and trouble shooter client spec issues and user issues.
  • Provided end-user training for all Tortoise SVN, JIRA users to effectively use the tool.
  • Migrated configuration items and artifacts from StarTeam into Subversion (SVN) on Linux.
  • Involved in setting up of Subversion-SVN server, server maintenance, Client machines setup.
  • Perform administrator activities for the SVN and maintain access control smooth and functioning.
  • Assisted in automation of Retail Data Warehouse applications using SVN/PVCS and Quick Build.
  • Managed SVN branching and merging for older projects in multiple simultaneous releases.
  • Administrated & Used SVN for branching, tagging, and merging.
  • Created scripts for Backup and restoring Subversion (SVN) repositories.
  • Created SVN repositories and maintained scripts for creating users with authentication.
  • Configured Apache and SVN to serve source controlled files internally.

Show More

22. Water Treatment

average Demand
Here's how Water Treatment is used in Building Engineer jobs:
  • Supervised and maintained buildings water treatment program.
  • Maintained fan coils, heating and air conditioning units, cooling towers, water treatment system and pneumatic compressors.
  • Performed Generator and Fire pump test run, replaced lighting, plumbing, water treatment, fire extinguisher inspections.
  • Conduct weekly fire pump test, water treatment testing of the close/open loop and low pressure boiler testing.
  • Managed and helped write the site wide water treatment contract to maintain water specifications for different systems.
  • Perform water treatment and testing with Chem-Aqua to open loops, closed loops, and hot loops.
  • Fire Suppression, Electrical, change Ballast, 120, 277, Plumbing and Water Treatment systems.
  • Work with Building BAS System and building Fire Alarm system, emergency generator and water treatment.
  • Help maintain chiller plant (readings, strainer cleaning, water treatment, etc).
  • Test and maintain water treatment for open and closed loop heating and cooling systems.
  • Tested all cooling tower and closed loop water treatment levels and adjusted as required.
  • Conducted water treatment checks on hot loop, cold loop, and cooling towers.
  • Maintained functioning plumbing in building restroom facilities, water treatments, and kitchen appliances.
  • Perform daily building inspections including water treatment tests on cooling tower condenser water.
  • Acquired boiler chiller readings as well as provided water treatment and chemical testing
  • Monitored and maintained water treatment in towers, spas, and pools.
  • Water treatment of closed chilled water system, RO water system.
  • Fire Suppression, Electrical, Plumbing and Water Treatment systems.
  • Water treatment testing on open and close loop system.
  • Oversee construction, elevator repair and water treatment.

Show More

23. Unix

average Demand
Here's how Unix is used in Building Engineer jobs:
  • Created UNIX shell scripts for loading data into Oracle databases using SQL and Oracle load utilities SQL*Loader and Oracle Bulk Loader.
  • Migrated automation of all nightly builds from a collection of Unix-based scripts and schedules to a web service.
  • Created and modified various UNIX scripts for group to assist in the reorganization of the current software environments.
  • Converted the Unix scripts and shell installation to enable the product to be demonstrated on Windows machines.
  • Created and supported the development infrastructure and application build processes of Java code in a UNIX environment.
  • Executed branch locks and unlock through UNIX commands and locked/unlocked the files in the perforce server.
  • Developed and maintained a series of UNIX shell scripts to manage batch order processing.
  • Executed Unix Shell Scripts and validated in UAT for looking right data.
  • Transfigured UNIX scripts to execute automatic builds across heterogeneous UNIX platforms.
  • Managed the installation and release for both Unix and Window platforms.
  • Worked with Unix Build Team to approve VM and Physical builds.
  • Worked extensively on cross-platforms (Windows-UNIX) with Subversion and CVS.
  • Developed UNIX shell scripts to configure and execute software builds.
  • Created software releases for various UNIX and Windows platforms.
  • Involved in the Recovery of the UNIX servers.
  • Developed UNIX shell scripts and auto deployment processes.
  • Build, Microsoft Windows NT, OS/390, and UNIX.
  • Developed UNIX shell scripts, jython scripts for Web sphere server configuration, file cleanup and log rotation.
  • Experience with working on LDAP configuration for Netgroups, SUDO roles, UNIX Groups and users.
  • Used ANT compile tasks like Javac, Depend, Apt tasks in UNIX environment.

Show More

24. Jira

average Demand
Here's how Jira is used in Building Engineer jobs:
  • Acted as an administrator of the JIRA and Confluence instances on a day to day basis including performance tuning/scaling the instances.
  • Integrated the Rally connector so that defects can be tracked in both JIRA and Rally.
  • Coordinated with team leads to determine needs and how best to implement JIRA within department.
  • Configured the Subversion plugin for JIRA to relate code commits to the issues created.
  • Installed and upgraded JIRA and its Plug-ins in production to keep up to date.
  • Integrated the project management features of JIRA with the build and release process.
  • Migrated a second version of JIRA into the main production version of JIRA.
  • Configured JIRA work flows according to the needs to the CM team.
  • Created a step by step guide to create a project in JIRA.
  • Administered JIRA and managed tickets raised by keeping a close eye.
  • Worked with engineering tools team to implement JIRA for agile development.
  • Migrated DBA, Development and Testing teams from VersionOne to JIRA.
  • Mentored several users in the use/functionality of JIRA and Confluence.
  • Integrated with JIRA to capture, organize and prioritize issues.
  • Utilized JIRA to track the software builds and releases.
  • Created JIRA Support Project/Agile board to track support issues.
  • Handled User/Group Administration, configured LDAP directory with JIRA.
  • Worked with JIRA for Issue Tracking and monitoring.
  • Used AtlassianJIRA as issue tracking and ticketing tool.
  • Published JIRA gadgets and dashboards on confluence page.

Show More

25. Building Equipment

average Demand
Here's how Building Equipment is used in Building Engineer jobs:
  • Coordinate maintenance efforts with building manager, outside contractors, assist with installations and modifications of building equipment systems.
  • Conducted periodic general preventative maintenance and aided with installation and modifications of building equipment systems.
  • Logged all building equipment operations and monitored temperatures to keep within desired range.
  • Performed preventative maintenance to building equipment according to engineering principles and safety regulations.
  • Performed preventive maintenance on building equipment and maintain building equipment records.
  • Assist with installation and modification of building equipment systems.3.
  • Performed installations and modifications of building equipment systems.
  • Assist with installation and modification of building equipment/systems.
  • Maintained inventory of building equipment and furniture.
  • Performed maintenance on building equipment.
  • Performed preventive maintenance on various commercial building equipment, pumps, valves, motors and air filters as needed.
  • Completed daily, weekly and monthly checklists on building equipment maintenance procedures and maintains records of scheduled maintenance procedures.
  • Installed, maintained, and replaced Roof Top Unit motors, chiller seals, and other specialized building equipment.
  • Conducted daily visual inspections of building equipment, operation, and cleanliness to ensure conformance to quality standards.
  • Perform preventive maintenance on building equipment for an 800,000 square foot high-rise office building as a temporary employee.
  • Coordinate preventative maintenance programs, tenant improvements, service contracts for building equipment and manage tenant service calls.
  • Performed building equipment rounds on low pressure boilers & chillers systems (York systems).
  • Do complete rounds for building equipment status, including UPS ATS and generator backup system.
  • Work in the preventive maintenance of air conditioner units, exhaust fans and building equipment.
  • Created work order for repairs and did minor repairs and PM's on building equipment.

Show More

26. General Maintenance

average Demand
Here's how General Maintenance is used in Building Engineer jobs:
  • Received trouble tickets dispatched from property management for general maintenance, prioritized and resolved tenant-reported issues on a daily basis.
  • Perform general maintenance duties utilizing multiple methods of general building maintenance skills.
  • Experienced in commercial/industrial general maintenance of the school systems buildings.
  • Performed general maintenance following the preventive maintenance schedule.
  • Performed general maintenance repair to building common areas.
  • Performed general maintenance repairs and monitored equipment operations.
  • Managed maintenance and conducted periodic general maintenance.
  • General maintenance when required to support facility.
  • General maintenance of high-rise commercial office building.
  • General maintenance of tractor and generators.
  • Completed general maintenance work orders.
  • Experienced with all phases of building systems include HVAC, boilers and chillers as well as general maintenance in office buildings.
  • General maintenance on HVAC equipment including but not limited to; replacing filters, greasing motors, and cleaning coils.
  • Monitored building needs and delegated to vendors for services that were beyond general maintenance as directed by property manager.
  • Conducted maintenance on HVAC systems, electrical components, landscaping systems, and general maintenance for three office buildings.
  • General maintenance, repair, troubleshooting, cleaning and installation of HVAC (Heat Ventilation Air Conditioning) equipment.
  • Performed property management, preventive and general maintenance as part of a team in a corporate complex.
  • General maintenance of common areas and all other work necessary to maintain the climate of the building.
  • Performed general maintenance in plumbing, electrical, environmental, safety, lighting, HVAC Equipment.
  • Perform server remediation for out-of-compliance servers, including patching, server moves, and general maintenance.

Show More

27. Source Code

average Demand
Here's how Source Code is used in Building Engineer jobs:
  • Utilized Serena Dimensions Configuration Manager and business manager software for promoting QIP source code baselines to different environments.
  • Performed compiling and tracking application source code into releasable system through variety of environments.
  • Assisted in the responsibility of the development and maintenance of builds and scripts including source code control and issue tracking.
  • Implement and maintain tools and procedures created to support the source code management and build requirements of Java-based software applications.
  • Configured, managed and controlled the source code repository - Clear Case and logged defects to Clear Quest.
  • Performed peer reviews on installing source code using TFS, ClearQuest, & Visual Studio 2010.
  • Manage code review and source code management systems, bug tracking systems and other engineering-related systems.
  • Migrated build system and source code repository from Microsoft VSS to Subversion in 3 months.
  • Monitored and troubleshot Microsoft tools and systems used to compile source code for flagship products.
  • Coordinated with software development engineers to resolve source code branch merge conflicts and code defects.
  • Ensured build systems and source code layout support production of branded and localized releases.
  • Perform all tasks related to source code control, software build and production releases.
  • Defined methodology for TEAM FOUNDATION SERVER Source code migration and branching and merging.
  • Enhanced the quality of the source code tree for the next software release.
  • Designed and implemented source code branching, merging, and promotion strategies.
  • Involved in configuration, setting up, maintaining and managing source code.
  • Implemented ClearCase and Subversion branching and merging operations for Java Source Code.
  • Used Build Forge to automate builds and deployment from updated source code.
  • Created a source code control system to manage all source code.
  • Implemented processes to identify and anticipate source code branch integration risks.

Show More

28. QA

average Demand
Here's how QA is used in Building Engineer jobs:
  • Identify and implement new technologies to enhance effectiveness of development and QA team
  • Configured Jenkins as a common Build engine to build and deploy applications to DEV, QA, UAT and PROD Environments.
  • Coordinated with QA and development teams to expedite defect tracking and resolution, and ensure compliance with strict production release schedules.
  • Experience in Deploying the Build Artifacts into Environments like QA, UAT and Production according to the Build Life Cycle.
  • Work closely with the QA and Release teams to deliver beta and release candidate software CD/DVD media on a deadline.
  • Participated in the release cycle of the product which involves environments like Development, INT, QA and Production.
  • Created scripts, diagnosed build issues, tested product installation, and distributed daily/nightly builds to QA.
  • Worked in creating WebSphere Application Server Clustered Environments and handling Load Balancing for QA UAT and Production.
  • Deployed code on Web Logic servers for Production, QA, and Development environments using WLST scripts.
  • Automated the code deployment process in each environment (development, QA, Staging, Production).
  • Perform software development builds and provide build support for core development, online development, and QA.
  • Engaged with QA Support Staff To Develop Automated Testing Procedures For Dialogue & Dialogue LIVE.
  • Created a scripted process to replicate SQL data from development to QA to production.
  • Experience in Coordinated with software development teams and QA teams and solved the problems.
  • Documented and executed delivery process for fixes and enhancements to QA and to production.
  • Maintained multiple environments for development, QA testing, UAT, training and certification.
  • Performed configuring feature based development code lines with required DEV and QAT environments.
  • Created Gated Check-in builds for development builds and manual builds for QA builds.
  • Performed basic system admin functions on DEV/QA/STG servers and synchronized multiple runways.
  • Administered and enhanced builds for release to QA and Prod environments.

Show More

29. Office Buildings

average Demand
Here's how Office Buildings is used in Building Engineer jobs:
  • Supervised and maintained corporate office buildings including mechanical and custodial needs.
  • Managed commercial office buildings by maintaining, operating, and repairing, HVAC, life-safety, electrical, and plumbing systems.
  • Maintained building's Mechanical, Electrical, Plumbing and HVAC systems for three commercial office buildings (225,000 s.f.).
  • Design and oversee the maintenance and upgrades to office buildings, lab space, data centers, and production facilities.
  • Managed the Maintenance and operations in five Commercial Office buildings and four Medical Buildings totaling about 750,000 square feet.
  • Serviced and maintained HVAC, plumbing, and electrical equipment for commercial and retail office buildings.
  • Provided day to day operations management for 3 commercial office buildings totaling over 200,000 square feet.
  • Installed external and internal CCTV surveillance camera equipment and DVR recorder for office buildings.
  • Maintain electrical, mechanical machinery, HVAC and plumbing for 6 office buildings.
  • Managed operations of three retail/commercial strip malls and three mid-rise office buildings.
  • Tenant Service calls in 2 high rise office buildings totaling 300,000 sq.ft.
  • Maintained HVAC, plumbing and electrical systems in six IBM office buildings
  • Engaged in operating and maintaining facilities and equipment in office buildings.
  • Provided full operations for office buildings consisting of 240,000 sq.
  • Repair and Maintenance on Three office buildings in HVAC Dept.
  • Lead position for one of Omaha's premier office buildings.
  • Maintained two office buildings in the DTC.
  • Oversee operations of 5 medical office buildings.
  • Maintained mid rise office buildings, approx.
  • Provide Engineering Services to six class A office buildings in the Alexandria VA area for a total of 825,335 sq.

Show More

30. Trane

low Demand
Here's how Trane is used in Building Engineer jobs:
  • Learned a lot about a chilled water system along with the TRANE EMS to ensure customers are satisfied on property.
  • Completed the water treatment training program provided by TRANE.
  • Worked on TRANE tracer summit building Management system.
  • Perform preventive Maintenance as required, Monitored Trane Energy Management System.
  • Monitor and operate Trane Tracer Summit building automation system.
  • Experienced with navigating and configuring Trane
  • Operated and maintained a duel BAS with Trane Tracer summit as the main and JC as the 2nd system.
  • Maintain Cooling Towers, Heat Boiler, Chill water and Sump pumps, Air handlers, Trane Chiller.
  • Maintained and operated Trane centrifugal supply/ return fans that supplied anywhere from 12,000 CFM to 75,000 CFM each.
  • Experienced in trouble shooting Trane & Titus variable air volume boxes, providing 18 zones per floor.
  • Operated and maintained Trane Supply/Return Centrifugal Fans that supplied anywhere to 10,000 CFM to 65,000 CFM.
  • Analyze and create daily reports on the status of server backups on intranet and extranet.
  • Communicated with Trane manager through weekly reports, monthly visits, and periodic phone conversations.
  • Established PM programs, maintained and programmed all Trane and Siemens BAS systems.
  • Operate and maintenance 22 (25 ton) and 8 (20 ton) trane AC packages with economizer valve.
  • Inspected, repaired and maintained Trane and Carrier and Liebert air handlers (5-120 tons).
  • Operate and maintain thirteen Trane Roof Top Units with D.X.
  • Performed PM's on Trane rootop units.
  • Experience includes REMS, REALM, 360, SERVICE INSIGHT, NIAGRA and TRIDIUM, and Trane Tracer Summit.
  • Control / monitor building temperature on EMS system (summit by trane) .

Show More

31. Management System

low Demand
Here's how Management System is used in Building Engineer jobs:
  • Provided technical expertise to plumbing, electrical, HVAC, and security systems, including computer-driven energy management systems.
  • Operate computerized building management systems, preventive or predictive maintenance computer systems and computerized data gathering system.
  • Operate Building Energy Management System to facilitate scheduling of equipment and to coordinate modes of operations.
  • Operate and adjust as necessary Building Management system and maintain all related equipment.
  • Finalize work orders by completing necessary documentation in the computerized maintenance management system.
  • Developed a zone wide energy management system upgrade program.
  • Schedule Energy Management System for minimal energy draw level.
  • Utilize Ubiquity Property Management System to monitor building systems.
  • Installed new plumbing and new electrical/sophisticated data management systems.
  • Utilized a Honeywell computerized building management system.
  • Monitor and operating Energy Management System.
  • Commissioned a new energy management system.
  • Maintained HVAC building energy management system.
  • Leverage Building Management System (BMS) to control building systems Use Douglas Lighting Control to control building lighting systems.
  • Run and maintain the district's building management system, which includes diagnosing and repairing all HVAC and pneumatic equipment.
  • Monitor and control Siemens building management system, purchasing agent, contractor management, facilities project leader and hiring manager.
  • Track and complete work orders generated by Computerized Maintenance Management System on equipment throughout a 2 million sq.
  • Organized, installed and operated Energy Management System (Delta) for mechanical, electrical and security systems.
  • Adjust set points, start-up and temperatures using a building energy management system (Tracer Summit).
  • Maintained PM and work order systems and daily operation and programming of Reliable Energy Management System.

Show More

32. Light Fixtures

low Demand
Here's how Light Fixtures is used in Building Engineer jobs:
  • Performed retrofitting of light fixtures and oversee energy conservation program.
  • Inspected/repaired locks/keys, doors, alarms, fire extinguishers and fire hoses, light fixtures and electrical equipment as assigned.
  • Replaced and repaired toilets, sinks, windows, doors, fixtures, outlets, light fixtures, and thermostats.
  • Checked electrical such as wiring, receptacles, light fixtures, and all defective parts.
  • Performed minor plumbing repairs, work on lighting Such as replacing ballast light fixtures.
  • Light electrical repairs: Changing of lamps, complete light fixtures, and ballasts.
  • Install light fixtures, locks, appliances, performed various other duties as needed.
  • Install and maintain all light fixtures, doors, lock hardware and cylinders.
  • Install control panels, electrical conduit, switches, and light fixtures.
  • Clean water fountains, dusts furniture, light fixtures, and equipment.
  • Repair and replace light fixtures, ballast, and ceiling fans.
  • Replace and repair electrical switches, smoke detectors and light fixtures.
  • Maintained and repaired all forklifts, installation of light fixtures.
  • Replace light fixtures, bulbs, electrical repairs as needed.
  • Retrofit T12 light fixtures to T8 light fixtures.
  • Monitor and replace light fixtures as needed.
  • Install light fixtures and small appliances.

Show More

33. GIT

low Demand
Here's how GIT is used in Building Engineer jobs:
  • Monitored and controlled overall operation through DDC (Digital Data Communication Systems).
  • Tracked digital equipment inventory, energy management, and maintenance scheduling.
  • Imported and managed multiple corporate applications into Git.
  • Maintain Subversion/GIT repository giving access and group controls.
  • Worked extensively on Sub-version to GIT repository migrations.
  • Configure SSL and Digital Certificates for requesting, generating and implementation for the communication between Web server and the Application Server.
  • Enable email notification, so that users and owner receives emails about the changes pushed to the GIT repository.
  • Maintain and repair computerized, electronic, pneumatic and digital direct control devises related to HVAC and heat control.
  • Implemented and maintained the branching and merging structure for build/release strategies utilizing Subversion and GIT in Linux and Windows.
  • Engineer coordinates and controls a range of sophisticated, stand-alone electrical, mechanical, and digital building control systems.
  • Worked on creating repositories in Git Stash for multiple applications Configured Git repositories in CI setup in Jenkins.
  • Fuel creates digital brand experiences for famous global companies such as McDonald`s, Mattel and Nokia.
  • Set ACL's using the ADAM group according to the user's request to a GIT repository.
  • Implemented a Git mirror for SVN repository, which enables users to use both SVN and Git.
  • Set up Jenkins server and build jobs to provide continuous automated builds based on polling the GIT.
  • Administered CVS/SVN/Git repositories and managed account administration, branching, merging, patch fixes and snapshots.
  • Created Git repositories and specified branching strategies that best fitted the needs for the client.
  • Managed multiple software release infrastructure planning, creating CM plans and usage based on Git.
  • Analyze and resolve conflicts related to merging of source code for GIT, Stash.
  • Created branches and managed the source code for various applications in SVN and GIT.

Show More

34. EMS

low Demand
Here's how EMS is used in Building Engineer jobs:
  • Operated and maintained building mechanical, electrical, HVAC, Plumbing systems and security/life safety equipment/systems.
  • Performed energy assessment and replacement cost feasibility analysis of building systems for presentation to clients.
  • Controlled all aspects of internal environment including maintenance of heating and air conditioning systems.
  • Examine existing systems, make recommendations for renovation; coordinate activities during system shutdowns.
  • Provide emergency response, critical alarm systems and mobilize additional resources as needed.
  • Make repairs and modification to systems and equipment according to customer requirements.
  • Inspected and documented equipment hazards, systems, and general engineering operation.
  • Perform systems programming tasks associated with installation and customization of program products.
  • Implement baseline/standards/templates around Windows Systems including: assisting setting Host Hardware Standards.
  • Monitor and track established metrics for budget items associated with day-to-day operations.
  • Value Created: Significantly reduced cost by implementing energy management systems.
  • Monitored all building systems using the Honeywell automation computerized system.
  • Assisted with the installation and modification of building automation systems.
  • Identified, diagnosed, and corrected facility operating system problems.
  • Monitor utility usage and responsible for Building Energy Management Systems.
  • Monitored boilers, electric generators and steam distribution systems.
  • Implemented routine maintenance on electrical systems around data center.
  • Monitored data center and life safety systems generators.
  • Performed administration duties in Subversion for multiple systems.
  • Provide technical support and consultation for operating systems.

Show More

35. EAR

low Demand
Here's how EAR is used in Building Engineer jobs:
  • Provided strategies to import All-Fusion Harvest repository configuration items into the Rational ClearCase repository framework.
  • Supervised and assigned tasks as needed to enhance appearance and operational efficiency of buildings.
  • Administered ClearCase MultiSite installation for 24x7 availability and a high degree of geographically-distributed development.
  • Maintained preventive maintenance records to improve guest room functionality and appearance.
  • Supervised janitorial team to ensure overall property appearance and maintain equipment.
  • Automated ClearCase based release management process including monitoring changes between releases.
  • Investigated, researched, recommended and implemented build machine configurations.
  • Research & Development of improvements and modifications on mining facilities.
  • Developed empathetic client relationships & earned reputation for exceptional service.
  • Imported and managed multiple corporate applications into ClearCase UCM/Subversion.
  • Received recognition for outstanding service for five consecutive years.
  • Constructed yearly convention center booth for club advertisement.
  • Researched and installed third-party plug-ins for compatibility.
  • Prepared yearly department budget for Management.
  • Spearheaded energy efficient products and procedures.
  • Prepared yearly budget figures for engineering needs
  • Maintain overall appearance of building facility
  • Used VSO and Product Studio to track bugs, and learned to interact with Source Depot (Perforce) when necessary.
  • Established an excellent attendance record over 12+ years of employment/contracting; only missed time due to a death in the family.
  • Created and configured dynamic/snapshot ClearCase views as per the requirements and writing configuration-spec for views to work with branches and labels.

Show More

36. Production Environment

low Demand
Here's how Production Environment is used in Building Engineer jobs:
  • Analyzed requirements for new development, test or production environments.
  • Automated delivery of software to QA and production environments.
  • Ensured processes are deployed successfully to production environment.
  • Maintained two Jenkins servers and one Bamboo server to deploy into production and non-production environments.
  • Created RPM packages required for deployment into DIT, SIT, Pre-Production and Production environments.
  • Configured Hudson for doing the build in all the non-production and production environments.
  • Worked on Jenkins to deploy code in Staging and Production environments.
  • Build and deploy software releases to staging and production environments.
  • Maintain, monitor test and production environments.
  • Configured software build and automated build process and deployed to nonproduction and production environment.
  • Handled a variety of assignments in a high-production environment, including having a working knowledge of VAV pneumatics systems and technologies.
  • Configured Hudson/Jenkins for doing the poll and scheduled build jobs in all the nonproduction and production environments.
  • Configured the Chef-Repo, Setup multiple Chef Work stations Maintain, monitor test and production environments.
  • Assisted Engineering team with build, deploy and release processes in pre-production & Production environments.
  • Staged all the packages on shared server for SIT, pre-production and production environments.
  • Created Instances in Apache Web Server and JBossApplication server in QA and Production environments.
  • Manage the deployment and implementation of deliverables into QA, UAT and production environments.
  • Performed build and deployment to the development , QAT and production environment.
  • Job Responsibilities Doing the day to day Build and deployments in pre prod and production environments.

Show More

37. Heat Pumps

low Demand
Here's how Heat Pumps is used in Building Engineer jobs:
  • Read and repair manuals to identify mechanical problems and fix, responsibilities included repair/ rebuilding of 1000 water source heat pumps.
  • Perform preventative maintenance on HVAC equipment, RTU'S, Heat pumps, split systems, air and water source.
  • Trouble shoot and fix select problems that may arise with VAV boxes, air handler units or heat pumps.
  • Repaired air compressors, pneumatic lines, cooling towers, heating units, heat pumps and exhaust fans.
  • Perform preventive maintenance on self contained units, variable fan drives, split systems, and heat pumps.
  • Repair and replace domestic hot water heat pumps, chilled water pumps, sump pumps and sewage pumps.
  • Completed special project HVAC work such as compressor and condenser coil replacement on Water Sourced Heat Pumps.
  • Performed daily repairs to water source heat pumps located though out five, 300,000 square foot buildings.
  • Service and repair all water source heat pumps-compressors, belts, pressure switches & air handler motors.
  • Diagnose and repair 5-20 ton split/packaged systems, heat pumps, air handlers, and boilers.
  • Repair or replace heat pumps, stream piping, plumbing, low voltage electric and drywall.
  • Repair range from trouble shooting the electrical circuits to changing out compressors and heat pumps.
  • Service carrier package units, water source heat pumps, cooling towers and condenser pumps.
  • Repair and maintenance of water source heat pumps and large tonnage package units.
  • Job Duties: Managed and operated boilers, heat pumps, chill-water systems.
  • Service and maintain water source heat pumps, RTU and cooling tower.
  • Perform Preventive maintenance on water source heat pumps, cooling towers
  • Repaired heat pumps, electrical and sealed system repair.
  • Certificate - Heat Pumps, Controls and Operation.
  • Heat Pumps- maintenance and repair.

Show More

38. SQL

low Demand
Here's how SQL is used in Building Engineer jobs:
  • Lead development of generic Repository-Installer utility to define, create and populate meta/seed data for Oracle and MSSQL databases.
  • Worked closely with partner teams and internal customers to represent the SQL Build team in scheduling and process planning.
  • Designed database for in-house release management tracking system using SQL 2008 which provided users integrated information for build status.
  • Programmed shopping cart, template engines, message boards and Social Profiles system in PHP using MySQL database.
  • Worked on NLB and SQL Cluster environments, efficiently used to reduce the downtime for the business users.
  • Configured, maintained and managed the automated build system (hardware and software) for SQL Server documentation.
  • Deploy Java web sites on Windows servers with custom content caching applications and SQL Server databases.
  • Designed and implemented SQL Server / VB.NET capital transaction load, control and approval system.
  • Conducted the Data modeling to plan and build a new SQL database schema Design.
  • Develop SQL queries, stored procedures, views, functions using Oracle 11g/SQL Server.
  • Used MySQL and SQL Server database for PL/SQL scripts, and stored procedures.
  • Experienced in configuring and managing web servers and SQL servers on clustered environments.
  • Monitored Build Lab for SQL Team as part of 4 person Build Team.
  • Used SQL queries to check the data integrity on an Oracle data base.
  • Involved in installing, administering, and maintaining the SQL server instances.
  • Administered the SQL and Oracle Database Schema for the different builds.
  • Performed the Tuning for the TFS as an SQL database.
  • Involved in Always on Setup and testing in SQL 20012.
  • Update SQL queries to optimize the database CPU utilization.
  • Build Engineer contractor on the SQL server build team.

Show More

39. Snow Removal

low Demand
Here's how Snow Removal is used in Building Engineer jobs:
  • Operated, maintained and serviced a variety of personnel lifts, bobcat, outdoor and snow removal equipment.
  • Use truck plow and bobcat for snow removal from ramps and sidewalks in downtown Duluth.
  • Maintain the building exterior such as snow removal, lawn care, painting and gardening.
  • Generated $1.2 million cost savings by bringing snow removal and landscaping functions in-house.
  • Facilitated snow removal, maintained lawns and gardens and operated Bobcat Skid-Steer.
  • Maintain exterior grounds, snow removal, parking lot lighting and striping.
  • Snow removal, salting, plowing, landscaping, etc., etc.
  • Performed general grounds maintenance, snow removal, landscaping etc KING SOOPERS
  • Snow removal, and cleaned lobby front walk way when needed.
  • Maintain ground including mowing grass, trim bushes and snow removal.
  • Porter, landscaping, snow removal and training of others.
  • Manage vendor contracts including landscaping, snow removal, janitorial.
  • Completed in house snow removal of parking lots and sidewalks.
  • Ground keeping, snow removal, Supervised equipment usage.
  • Handle all vendors including landscaping and snow removal.
  • Snow removal from sidewalks and tenant parking lot.
  • Snow removal cut grass clean rest rooms.
  • Assisted with snow removal when needed.
  • Perform snow removal on property.
  • Snow removal and lawn care.

Show More

40. Building Operations

low Demand
Here's how Building Operations is used in Building Engineer jobs:
  • Responded to tenant service calls relating to overall building operations, mechanical, electrical and plumbing problems and initiate corrective action.
  • Ensured compliance with all security protocols, cleaning procedures and other maintenance procedures relating to building operations.
  • Recommend and implement energy saving and reliability related projects to for key building operations and sustainability.
  • Order related supplies and provide recommendations for purchases and budget development in building operations.
  • Lead maintenance supervisor of plant and building operations at facility assigned.
  • Maintain tool inventory and coordinate day-to-day building operations.
  • Performed all Building operations including work orders.
  • Managed contracted services for building operations/equipment.
  • Scheduled and directed building operations staff.
  • Provided timely responses to tenant requests and work orders both individually and as part of a five member building operations team.
  • Complied with all applicable safety codes, regulations, governmental agency and company directives as they related to building operations.
  • Support overall building operations for two Class A buildings as well as tenant requests for repairs and maintenance issues.
  • Report to the Building Operations Director to insure he is aware of all building problems and service repairs.
  • Maintain daily records of building operations, vendors and subcontractor services, repair, parts and equipment.
  • Acted in the absence of the current Building Operations Director on numerous occasions during current tenure.
  • Coordinate daily task for associates to accomplish service, maintenance and repairs for building operations.
  • Use of computerized / web based remote to control building operations and energy management systems.
  • Developed daily log sheet for building tours and check list to track building operations.
  • Provide HVAC for building operations of a 470,000 sq ft high-rise complex.
  • Maintain essential building operations systems in professional complex of 80,000 sq.

Show More

41. Python

low Demand
Here's how Python is used in Building Engineer jobs:
  • Used WLST and Python scripts in Web logic that will let us deploy any number of 'wars' with less time.
  • Developed Ant, Shell, Python scripts for WebSphere Application server, WebSphere portal server Installation and configurations builds.
  • Performed unit tests and debugging Python applications Reviewing and enhancing existing code, fix bugs and create system documentation.
  • Developed installer scripts using Ant, Python, Unix for various products to be hosted on Application Servers.
  • Created and maintained custom Python build scripts scheduling nightly builds utilizing Task Manager and per application batch files.
  • Developed utilities in C, Python, and bash shell to automate and improve the build process.
  • Implemented zero downtime deployment process in WebLogic using python and shell script and automated it using Jenkins.
  • Used ANT and Python scripts to automate the Build and deployment process to deploying the web services.
  • Developed automation and deployment utilities using Ruby, Bash, PowerShell and Python.
  • Involved in developing custom scripts using Python & Shell to automate jobs.
  • Worked with scripting language like Python and Ruby.
  • Involved in writing Test scripts using PYTHON.
  • Automated the cloud deployments using chef, python (boto & fabric) and AWS Cloud Formation Templates.
  • Generated Maven, Python& UNIX scripts for build activities in QA, Staging and Production environments.
  • Developed email notification system of nightly build status using Python script and scheduled using Cron.
  • Worked with Scripting languages like Bash, Shell, Python Support developers to resolve issue.
  • Developed CD GUIs using AutoPlay Menu Studio (Windows) and Python (Linux).
  • Maintain the build process and support using in-house and 3rd party Python/C# APIs.
  • Developed the Java applications using Java, JSP, Servlets and Python.
  • Second part of this was to evaluate various unit test tools like Vectorcast, GTest, Python based unit testing.

Show More

42. Tomcat

low Demand
Here's how Tomcat is used in Building Engineer jobs:
  • Performed setup of clustered environment with Apache Tomcat Application Server.
  • Installed and configured Tomcat and involved in deployment activities.
  • Configured Oracle and MySQL database with tomcat, responsible for deployment and application support.
  • Installed and configured apache1.3/2.0 web server with tomcat 5.5 application server.
  • Conducted performance testing of Apache and Tomcat management services.
  • Utilized Tomcat and Apache servers for cloud server management.
  • Used Tomcat as application server for the deployments.
  • Evaluated and rolled out new versions of multiple software such as Apache, Weblogic, MySQL and Tomcat.
  • Support build-deployment for all Jrules Apps and Broker applications and also applications running on Apache Tomcat servers.
  • Configured JDBC and JMX in tomcat to connect with Data base like oracle and mySQL.
  • Installed and configured Microsoft IIS, Apache, and Tomcat Webserver in various environments.
  • Installed Jira and Confluence on Tomcat server.
  • Used Chef to automate the deployment workflow of JAVA applications on Apache Tomcat and JBoss application servers.

Show More

43. Websphere

low Demand
Here's how Websphere is used in Building Engineer jobs:
  • Performed Application-data backup & recovery, local backup/restoration of the WebSphere Environment - configurations and applications.
  • Maintained and updated website for reporting of the listed information utilizing HTML/CSS/WebSphere.
  • Involved in deployment and configuration of WebSphere Application Server.
  • Administered WebSphere/Web logic application Servers at configuration level.
  • Worked in creating WebSphere Application Server Clustered Environments and handling Load Balancing for Quality Analysis, User Acceptance Test and Production.
  • Configured WebSphere MQ with WAS by creating Queue Connection Factories, Queue Destinations, Resource Adapters and Listener Ports.
  • Automated the deployment and server bounce process is by creating the scripts using WebSphere Scripting Tool (WSST).
  • Configured and administered ODBC, JDBC, JMS and JNDI / Data Sources on WebSphere Application Server 6.x/7.x.
  • Integrated build servers with WebSphere Application Server 4.0/5.0 for J2EE application development, deployment, debugging and testing.
  • Created, Configured and Administered Profiles, Clusters, Nodes and Node Groups for WebSphere Application Server.
  • Installed and configured the BuidForge and RAFW for WebSphere App Server and WebSphere Portal server automation.
  • Developed Ant scripts for installation of WAS, WebSphere Portal 6.1/6.0, Build and release.
  • Installed and configured of Web Sphere extended deployment, WebSphere Portal Server 6.1.
  • Work experience on Application Edition Manager (AEM) for WebSphere XD.
  • Support all WebSphere Application Server based applications using JACL script for Deployment.
  • Developed and tested WebSphere - web methods - database build process.
  • Worked as a WebSphere and IIS Administrator for all the environments.
  • Installed and configured WebSphere Application Server 8.5 on multiple platforms.
  • Deployed JAVA/J2EE applications through WebSphere Application server.
  • Deployed artifacts to Websphere application servers.

Show More

44. Square Feet

low Demand
Here's how Square Feet is used in Building Engineer jobs:
  • Participate in tenant improvements, planning, design and implementation/commissioning of approximately 250.000 square feet.
  • Assisted in the operation and maintenance in the following building systems in a hotel containing 358 rooms and 185,000 square feet.
  • Lead maintenance tech for roving maintenance techs maintaining over 1.8 million square feet of retail, industrial, and office space.
  • Performed daily duties of operating and maintaining a LEED Gold certified commercial site of approximately 1.8 million square feet.
  • Provide complete maintenance and vendor management services for a total of 770,000 square feet of commercial office space.
  • Managed maintenance on two properties consisting of 480,000 square feet under the ownership of the companies listed above.
  • Ensured optimum system performance at Stamford Harbor Park's 400,000 square feet of commercial office space.
  • Service over 300,000 square feet of Class A commercial property on 17 acres in Orange County.
  • Maintained effectively and efficiently a combined 1.3 million square feet and 54 floors of office space.
  • Oversee the maintenance and daily operations of two class A buildings totaling 400,000 square feet.
  • Perform all maintenance and repairs for two institutional facilities consisting of over 1,000,000 square feet.
  • Direct the maintenance activity of six buildings totaling 800,000 square feet on 72 acres.
  • Oversee the opening of over 1.2 million square feet of Class A commercial office.
  • Operate and maintain three downtown buildings, totaling 1.1 million square feet.
  • Maintain 500,000 square feet of commercial space with the assistance of EMS.
  • Operate and maintain multiple off-site locations, covering 1 million square feet.
  • Operated and Maintained 166,000 square feet commercial office high rise.
  • Manage 5 commercial buildings over 500,000 square feet combined.
  • Maintained 80,000 square feet of facility grounds.
  • Managed three properties totaling 400,000 square feet.

Show More

45. SCM

low Demand
Here's how SCM is used in Building Engineer jobs:
  • Designed and developed a tool for on-boarding an application in an e-commerce release in the SCM and build/deployment system.
  • Provided end-user support, performed baseline build, merges, software release management, and other SCM activities.
  • Adhere and enforce governing Release, SCM policies and procedures, and contribute to their refinement over time.
  • Created the Deployment notes along with the Local SCM team and released the Deployment instructions to Application Support.
  • Identify new tools/technologies that make Release, SCM process more efficient, reliable, and cost effective.
  • Experience in SCM/Build Engineer using TFS 2013, Subversion, Jenkins and Octopus on Windows environment.
  • Documented SCM process and recommended some process changes, and policies of the company.
  • Administer various development, support, and patch branches and enforce SCM best practices.
  • Performed SCM tasks like branching, merging and tagging the source code in SVN.
  • Help integrate Rational suite of products to come up with complete SCM solution.
  • Implemented all the SCM re-engineering efforts to achieve the CMM Level 3 standards.
  • Coordinated with Project Managers to develop the SCM Plans and Tool Usage Models.
  • Introduced a Source Control Management (SCM) system to the company.
  • Integrate SCM with other CI and CD tools to achieve desired results.
  • Consulted with and/or guided development teams in SCM Fundamentals for build automation.
  • Documented different build/release procedures and implement SCM plan and software deployment plan.
  • Performed enterprise wide analysis of SCM options to replace current SCM processes.
  • Provided Code Branching strategies for the releases in SCM tool Subversion.
  • Automated collection of data from SCM and code analysis tools.
  • Instructed developers on how to use the SCM system.

Show More

46. Exhaust Fans

low Demand
Here's how Exhaust Fans is used in Building Engineer jobs:
  • Conducted daily inspection of building for proper heating and air conditioning to ensure operation of all water heaters and exhaust fans.
  • Conducted PMs on ADC Dryers, ChicagoAir Press, Chicago flat iron, exhaust fans, and walk in cooler.
  • Ice machines, bulk refrigeration/freezer walk in coolers, Fan Coil Units, Exhaust Fans, and Rooftop Heating/AC Units.
  • Perform mechanical repairs and maintenance on HVAC equipment, CO2 equipment for exhaust fans and water filtration system.
  • Performed Routine checks on cooling towers, hot water pumps, and exhaust fans.
  • Replace and repaired outlets, exhaust fans, lighting fixtures, and switches.
  • Perform all other related duties as assigned such as maintenance on Chill Water Systems, Air Handlers, and Exhaust Fans.
  • Performed preventive maintenance on all hvac such as air handler unit, fan coil units, exhaust fans, Cooling tower.
  • Maintain 17 roof top units, exhaust fans and all pneumatic HVAC boxes.Responsible for all plumbing and electrical.
  • Maintain and repair all HVAC equipment including Crac, RTU MAU and exhaust fans up to 120 ton.
  • Maintained Chiller, Air Handler Units; Returned Air & Exhaust Fans; and Maintained Cooling Systems

Show More

47. Solaris

low Demand
Here's how Solaris is used in Building Engineer jobs:
  • Deployed and implemented Perforce across a software development organization developing business-critical applications in mixed Solaris/Windows environment.
  • Integrate, build, debug, confidence test, release, and audit software in UNIX environment (Sun Solaris).
  • Developed Java programs to automate the software installation verification for the VETSNET middle tier Solaris packages.
  • Trained and supported all ClearCase users on Windows, Solaris, Red Hat and AIX platforms.
  • Migrated Jenkins build software from legacy servers to Solaris 11g system.
  • Created virtual machines for running Weblogic, Oracle 11g database, Solaris 10, Red Hat.
  • Designed a Korne shell script that constructs a manifest file for a Solaris install package.
  • Implemented BASH shell scripts to aid in administering of RHEL / Solaris VMs.
  • Construct Puppet Modules/Functions to Support Solaris IPMP (IP Multipathing) on Solaris.

Show More

48. Version Control

low Demand
Here's how Version Control is used in Building Engineer jobs:
  • Involved in installing subversion version control and creating and administering repositories.
  • Provided Configuration Management Version Control Database support to Iridium Software Integration Lab
  • Performed version control administration using CVS.
  • Update DB changes to various environments related to GUI changes, maintain DB scripts in the Version control tool.
  • Integrated source code development branches using Source Depot version control (used within Microsoft and similar to Perforce).
  • Established and maintained version control processes to ensure the integrity of the source code and build quality.
  • Net applications were built by creating and queuing different Build definitions in Team foundation version control.
  • Handled the Java source code in the repositories in the version control system as Subversion.
  • Integrated source code development branches using Microsoft's internal Source Depot version control.
  • Proposed branching strategies for using Version Control Systems like Subversion and P4.
  • Created branches, performed merges in version control systems SVN and Perforce.
  • Supported daily and special builds and CVS version control tools.
  • Used ClearCase Configuration Management (Version Control) System.
  • Experience on using version control package ClearCase.
  • Used Subversion as Version Control System.
  • Used Clear case (Base) as version control to store source code.
  • Administer the version control system -IBM Clear case and IBM Project explorer Software configuration management support with branching and merging strategies.
  • Worked with IBM Rational clearcase for maintaining the source code as up-to date and version controlled.
  • Provided the development source code version control policy by implementing various trigger functionalities in Clear Case.
  • Created Workspace to work on the files that are under the version control.

Show More

49. Service Calls

low Demand
Here's how Service Calls is used in Building Engineer jobs:
  • Prioritized service calls and follow-up upon completion; performed troubleshooting on equipment and evaluated and recommended equipment/service upgrades.
  • Committed to prioritizing emergency situations and service calls.
  • Prioritize service calls and follow-up upon completion* Orders parts and supplies as required, and maintains stock and inventory control.
  • Responded to service calls, monitored HVAC systems, coordinated subcontractor work, and communicated with management on any issues.
  • Inspected tenant lighting, repaired ballasts, replaced HVAC air filters, and completed all property management service calls.
  • Performed service calls, tie-in's, system/panel upgrades and new system installations in a variety of environments.
  • Respond to service Calls and tenant requests for HVAC, plumbing, and control issues.
  • Responded to tenant service calls including all above issues and janitorial and safety.
  • Performed duties assigned by Chief Engineer, along with service calls and PMs.
  • Monitor service calls completion and flow up on all open service tickets.
  • Handled service calls for HVAC, lighting and mechanical room projects.
  • Maintained through control logs for incoming and outgoing service calls.
  • Responded to service calls and building emergencies as needed.
  • Responded to emergency and routine tenant service calls.
  • Remain as on-call engineer for emergency service calls.
  • Prioritized service calls and followed up after completion.
  • Assisted in daily tenant service calls.
  • Respond to trouble service calls.
  • Coordinate all customer service calls and reporting via Mainsaver Facility Management software.
  • Utilized Datastream MP2 & 7i (CMMS) for tracking service calls, work orders & preventive maintenance.

Show More

50. Web Application

low Demand
Here's how Web Application is used in Building Engineer jobs:
  • Created custom single-page, responsive web application to replace a legacy line-of-business web application.
  • Designed web applications that automated CM team functions and maintained process integrity.
  • Experienced with release engineering, configuration management in Tomcat web application environment.
  • Work with developers to integrate their web applications onto standard infrastructure.
  • Web application project/solutions from source code was added to TF source control later performed build and deployment automatically.
  • Managed and improved the deployment process for Ruby on Rails web applications via Capistrano and server less Puppet.
  • Experience of working with the release and deployment of large-scale Java/J2EE Web applications using SVN repository.
  • Compiled and packaged the Spring and Hibernate frameworks for building the web application.
  • Test the client server and web applications in accordance to the requirements.
  • Developed and implemented the software release management for the release of web applications.Wrote MAVEN Scripts to automate the build process.
  • Used Puppet to manage Web Applications, Config Files, Data base, Commands, Users Mount Points, Packages.
  • Provided guidance and assistance to students for developing projects based on web applications, iOS applications and Android applications.
  • Develop NANt scripts to perform builds on web applications and deploy the new code to environment.
  • Created and maintained the Jython deployment scripts for Web Sphere web application server.
  • Converted legacy Visual Studio Web Site Projects into Web Application Projects.
  • Deployed the Java applications into web application servers like JBoss.
  • Used IBM Websphere as web application server for deploying artifacts.
  • Experienced in PHP & Mysql web applications.

Show More

20 Most Common Skill for a Building Engineer

Hvac18.4%
Boilers10.9%
Chillers10.5%
Life Safety9%
Preventative Maintenance7.2%
Building Maintenance3.7%
Customer Service3.5%
ANT3.3%

Typical Skill-Sets Required For A Building Engineer

RankSkillPercentage of ResumesPercentage
1
1
Hvac
Hvac
12.3%
12.3%
2
2
Boilers
Boilers
7.3%
7.3%
3
3
Chillers
Chillers
7%
7%
4
4
Life Safety
Life Safety
6%
6%
5
5
Preventative Maintenance
Preventative Maintenance
4.8%
4.8%
6
6
Building Maintenance
Building Maintenance
2.5%
2.5%
7
7
Customer Service
Customer Service
2.3%
2.3%
8
8
ANT
ANT
2.2%
2.2%
9
9
Continuous Integration
Continuous Integration
2.2%
2.2%
10
10
Building Automation System
Building Automation System
2.2%
2.2%
11
11
Air Compressors
Air Compressors
2.1%
2.1%
12
12
Troubleshoot
Troubleshoot
2%
2%
13
13
Maven
Maven
2%
2%
14
14
VAV
VAV
2%
2%
15
15
Linux
Linux
1.8%
1.8%
16
16
Air Handlers
Air Handlers
1.7%
1.7%
17
17
Mechanical Equipment
Mechanical Equipment
1.6%
1.6%
18
18
Configuration Management
Configuration Management
1.6%
1.6%
19
19
Perl
Perl
1.6%
1.6%
20
20
Electrical Systems
Electrical Systems
1.6%
1.6%
21
21
SVN
SVN
1.5%
1.5%
22
22
Water Treatment
Water Treatment
1.5%
1.5%
23
23
Unix
Unix
1.4%
1.4%
24
24
Jira
Jira
1.4%
1.4%
25
25
Building Equipment
Building Equipment
1.4%
1.4%
26
26
General Maintenance
General Maintenance
1.4%
1.4%
27
27
Source Code
Source Code
1.4%
1.4%
28
28
QA
QA
1.4%
1.4%
29
29
Office Buildings
Office Buildings
1.3%
1.3%
30
30
Trane
Trane
1.3%
1.3%
31
31
Management System
Management System
1.3%
1.3%
32
32
Light Fixtures
Light Fixtures
1.3%
1.3%
33
33
GIT
GIT
1.2%
1.2%
34
34
EMS
EMS
1.2%
1.2%
35
35
EAR
EAR
1.2%
1.2%
36
36
Production Environment
Production Environment
1.1%
1.1%
37
37
Heat Pumps
Heat Pumps
1%
1%
38
38
SQL
SQL
1%
1%
39
39
Snow Removal
Snow Removal
1%
1%
40
40
Building Operations
Building Operations
0.9%
0.9%
41
41
Python
Python
0.9%
0.9%
42
42
Tomcat
Tomcat
0.9%
0.9%
43
43
Websphere
Websphere
0.8%
0.8%
44
44
Square Feet
Square Feet
0.8%
0.8%
45
45
SCM
SCM
0.8%
0.8%
46
46
Exhaust Fans
Exhaust Fans
0.8%
0.8%
47
47
Solaris
Solaris
0.7%
0.7%
48
48
Version Control
Version Control
0.7%
0.7%
49
49
Service Calls
Service Calls
0.7%
0.7%
50
50
Web Application
Web Application
0.7%
0.7%

9,165 Building Engineer Jobs

Where do you want to work?