Bunnell Lammons Engineering jobs

As a Senior Geologist for Bunnell Lammons Engineering, Inc. (BLE), you will assume a pivotal role in our organization's dedication to excellence within our Hydrogeological Services Department. You will be charged with leading complex geological projects, analyzing data and communicating your findings to stakeholders. Minimum Job Requirements Bachelors in geology, or civil/environmental engineering, environmental science or related field. 10 years of senior level experience with 5+ years direct experience managing projects, supervising and mentoring staff, preparation and review of technical proposals, regulatory agency interactions and negotiations, and providing QA/QC of deliverables. Professional Geologist (PG) credentials. Ability to design field sampling programs, manage multiple subcontractors, as well as interpret geological, hydrogeological and chemical data from contaminated sites. Proficiency in groundwater statistics. Effective technical writing, strong oral communication, presentation, and time management skills. Excellent leadership and client management skills. Ability to work independently and as part of a team to meet organization and project objectives. Technically adept, flexible, and forward thinking. Exhibits ability to successfully track and meet budgets and schedules. Exhibits attention to detail, and able to work under periodic time constraints. Demonstrated knowledge of Federal, State, and Local solid waste and mining requirements. Willingness to travel regionally for short periods of time. What you will be doing daily Provide leadership, training, mentoring and support to junior staff and serve as a regional soil and groundwater subject matter expert. Manage and analyze groundwater compliance at landfill facilities. Prepare and review Alternative Source Demonstrations (ASD), Assessment of Corrective Measures (ACM), and Corrective Action Plans (CAP) Manage and prepare Hydrogeological Assessment Reports (HAR) for both existing and greenfield landfill and mine sites. Manage and prepare geological economic resource evaluations for both existing and greenfield mine sites. Manage and prepare Environmental Monitoring Plans (EMP) for existing and greenfield landfill sites. Manage subsurface investigation and remediation project's scope, schedule, budget, staff, and subcontractors for existing public and private sector clients. Provide peer review of project deliverables, e.g. reports, proposals, cost estimates and plans for national, regional and local clients. Develop and update proposal, report, plan, and protocol templates for hydrogeological and geologic evaluations, disseminate updates to branch managers and project managers. Conduct internal audits of projects to ensure project managers are in conformance with both industry and company standards. Act as a liaison and advocate for clients with state and federal environmental regulatory agencies. Preferred Qualifications M.S. Degree Experience with groundwater modeling GIS and/or CAD Experience OSHA 40-hour HAZPOWER Certification. Leadership Behaviors STRATEGIC - Take a long-range, broad approach to problem-solving and decision-making through objective analysis, thinking ahead, and disciplined planning and execution. COMMUNICATION - Explaining things clearly and thoroughly; expressing thoughts and ideas readily; keeping others well informed; setting forth viewpoints; being explicit about what is needed and wanted. EXCITEMENT - Getting others enthusiastic and involved; engaging in a high-energy manner; generating excitement; being lively and dynamic; creating a high-activity environment. MANAGEMENT FOCUSED - Making things happen; being influential; taking control of a situation; providing guidance to others; and acting as a facilitator; Always leave or end conversations with clients and co-workers feeling better for having met you. Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Educational re-imbursement programs Vehicle allowance (conditions apply) Visit: *************** and connect with BLE on LinkedIn , Facebook and X (Formally known as Twitter)

Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you!

Bunnell-Lammons Engineering, Inc. (BLE) has an opening for a Code Compliance Inspector to join our team in Greenville, SC. The primary responsibility of this position is to provide Building, Mechanical, Plumbing, and Electrical code compliance inspections. Responsibilities Perform inspections for a wide variety of projects including commercial, institutional, industrial and residential buildings. Inspections should verify construction conforms to all applicable codes and project plans and specifications. The ability to work independently, communicate effectively and maintain professional working relationships with clients and coworkers. Interaction with representatives of Office of School Facilities (OSF) and the Office of State Engineer (OSE). Produce detailed inspection reports. Requirements Valid Driver's License Ability to pass pre-employment Drug screen 5 years of experience in Code Inspections ICC Building, Electrical, Mechanical, and Plumbing Inspector Certifications SCLLR Registration Self-motivation and ability to manage time and priorities. Ability to complete projects and tasks on an individual basis, as well as work collaboratively as part of a project team. Capable of developing and nurturing client relationships and pursuing new project opportunities BLE offers excellent company benefits and a competitive salary. Salary is commensurate with experience and certifications. Job Type: Full-time

Reports to: Branch Manager Status: Full- Time, Exempt Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons Engineering (BLE), our core principles shape everything we do. We put people first, prioritizing our clients, employees, and community in every decision. We believe trust is earned through honesty, dependability, and delivering on our promises. Clear, timely communication keeps our clients and partners informed, while a commitment to excellence drives us to produce work that consistently sets the standard in our industry. Most importantly, we honor every commitment we make and believe that no challenge is too complex when the right people work together. These values define who we are, how we operate, and the kind of team we continue to build. Notice to applicants: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Position Overview We are seeking a qualified Metals Inspector to join our growing engineering consulting team. This position involves performing field and shop inspections of structural steel, welding, bolting, and related components to ensure compliance with applicable codes, standards, and project specifications. The ideal candidate will hold relevant certifications and possess a strong attention to detail, technical knowledge, and a collaborative mindset. Minimum Job Qualifications 3-5 years of relevant experience performing structural steel, bolting, and welding inspections in a field or shop environment. Current Certified Welding Inspector (CWI) and/or ICC Structural Steel and Bolting/Welding Special Inspector certification. The ability to obtain required security clearances for work on military installations, airports, nuclear sites, and power plants. Familiarity with non-destructive testing (NDT) methods such as Magnetic Particle (MT), Dye Penetrant (PT), and Ultrasonic Testing (UT) preferred. Preferred Technical Qualifications ASNT Level II certification in MT, PT, and/or UT. ICC Structural Steel and Bolting and Structural Steel and Welding certifications. Experience in reinforcing steel and post-tensioned concrete inspection. Articulating lift operator certification. Key Responsibilities Leadership and Management Serve as a field representative of the firm, upholding the highest standards of safety, professionalism, and client service. Mentor and assist junior technicians or inspectors on projects as needed. Demonstrate initiative by identifying project challenges or discrepancies and proactively working with project managers or engineers to resolve them. Participate in internal training sessions and contribute to the continuous improvement of field operations and reporting practices. Project Management Coordinate daily inspection activities on assigned projects to ensure work is completed on schedule and in compliance with project specifications. Proctor and observe welder qualification tests, ensuring documentation is properly completed. Prepare accurate, timely, and detailed inspection and test reports for submittal to clients, contractors, and project managers. Assist with additional inspection services as needed to support overall project needs, including: Floor flatness/levelness measurements. Locating reinforcing steel using pacometers (R-meters) and concrete imaging radar. Concrete placement observations and miscellaneous field testing. Technical Expertise Perform inspections of structural steel bolting and welding in accordance with applicable codes and standards, such as AWS D1.1, D1.3, AISC Manual of Steel Construction, and others. Conduct inspections of various welding applications, including structural steel, thin-walled piping, stainless steel, and carbon steel. Maintain working knowledge of additional welding and fabrication codes, such as ASME and API. Utilize proper tools and instruments to perform accurate measurements and inspections in the field and shop environments. Possess essential math and measurement skills, including: Calculating area, volume, torque values, and tensile strength. Performing unit conversions (imperial/metric) and fraction-to-decimal conversions. Reading and interpreting rulers and measurement devices. Why Join Us? Industry-leading reputation with a diverse and growing project portfolio. Collaborative, supportive work environment where your leadership makes a visible impact. Opportunities for professional growth and advancement within a dynamic, expanding organization. Comprehensive benefits package, including medical, dental, vision, 401(k) with company match, and more. Benefits Medical/Vision/Dental 401(K) with partial company matching Life Insurance Short/long term disability Paid vacation Paid sick leave Eight (8) paid holidays Vehicle allowance (conditions apply)

Senior Geotechnical Engineering Consultant Full-Time Overview of Bunnell-Lammons Engineering, Inc. Bunnell-Lammons Engineering, Inc. (BLE), was founded in 1996 by a small group of engineers and is still managed by engineers today. Every member of our team has a personal stake in ensuring the success of our clients. As employee-owners, we are all personally accountable for building lasting relationships and delivering superior results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to work closely alongside clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references, and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and be able to interview on-site where the position is located. Job Description As a Senior Geotechnical Engineering Consultant for Bunnell Lammons Engineering, Inc. (BLE), you will play a crucial role in advancing excellence within our growing Geostructures Group. Your responsibilities include serving our long-term clients, expanding our current geotechnical capabilities, fostering a collaborative and innovative environment, and cultivating enduring professional relationships. This role offers a favorable work-life balance while providing opportunities to contribute to challenging and distinctive engineering projects. Our Geostructure design group focuses on deep foundations, retaining structures, geosynthetics, and soil structure interaction projects. These projects span a multitude of sectors, including transportation infrastructure, campus facilities (laboratory buildings, academic buildings, and athletic facilities), mid to high-rise buildings, civil infrastructure, and geologic hazard mitigation (structural improvements, ground improvements, and slope stabilization). Join us in shaping the future of geotechnical engineering while becoming a part of BLE's next generation of leaders. Minimum Job Requirements Bachelor's degree in Civil Engineering with a geotechnical focus. Masters is preferred. 15 years of relevant professional experience. Licensed Professional Engineer (PE) in South Carolina or North Carolina, with the ability to become licensed in additional Southeastern states within six months. Extensive knowledge of geotechnical design and construction requirements for retaining structures, deep foundations, earthwork construction, and ground improvement technology. Ability to travel up to 10% of the time for site meetings, marketing, technical seminars, regulatory seminars, engineering workshops, and client development within the Southeastern US. What you will be doing daily Perform technical oversight, project management, client management, and business development for the Geostructures Group under the direction of the Geotechnical Department Manager. Provide mentorship and coaching to staff and project-level engineers within the geotechnical group. Cultivate strategic partnerships and relationships with key stakeholders in the public and private sectors, including industry leaders, potential clients, and government entities, to drive business growth and enhance market position. Oversee and contribute to internal training seminars, as requested by the Technical Services Director, to promote continuous learning and knowledge-sharing within the organization. Review proposals and actively participate in business development activities to identify new revenue streams. Review written reports and ensure quality and commitment to BLE's clients. Explore and adopt new technologies to improve project efficiency, quality, and objectives, including electronic field data collection and reporting. Leadership Behaviors STRATEGIC - Take a long-range, broad approach to problem-solving and decision-making through objective analysis, thinking ahead, and disciplined planning and execution. COMMUNICATION - Explaining things clearly and thoroughly; expressing thoughts and ideas readily; keeping others well informed; setting forth viewpoints; being explicit about what is needed and wanted. EXCITEMENT - Getting others enthusiastic and involved; engaging in a high-energy manner; generating excitement; being lively and dynamic; creating a high-activity environment. MANAGEMENT FOCUSED - Making things happen; being influential; taking control of a situation; providing guidance to others; and acting as a facilitator; Always leave or end conversations with clients and co-workers feeling better for having met you. Benefits Vehicle allowance (conditions apply) Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Educational reimbursement programs Visit: *************** and connect with BLE on LinkedIn , Facebook and X (Formally known as Twitter)

Greenville South Carolina Full- Time - Entry level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to work closely alongside clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Job Description As a Construction Materials Laboratory Technician (CMLT) at Bunnell Lammons Engineering, Inc. (BLE), you will assume a pivotal role in our organization's dedication to excellence in our AASHTO and CCRL accredited laboratory. Reporting directly to our Lab manager. An essential aspect of your role is to demonstrate strong leadership skills and contribute to the continuous development of a collaborative team environment. Your expertise and dedication will play a critical role in maintaining the high standards of our laboratory and ensuring the success of our projects. Minimum Job Requirements High School or General Education Equivalent (GED) Familiarity with ASTM, ASSHTO, AMRL, CCRL and USACOE test methods specific to geotechnical and construction materials. Minimum required certifications: ACI Concrete testing Technician ACI Aggregate base testing Ability to attend to detail and work in a time-conscious and time-effective manner. Knowledge of project management, understanding project baseline documentation, costs, and schedules. Intermediate to Advanced level proficiency in MS Office applications (Word & Excel). Must be self-motivated, able to efficiently working independently while completing scheduled tasks, and/or lead a project team. Must be able to effectively communicate both verbally and in writing with team members, BLE leadership, clients, local, state and federal authorities of all levels. Must be self-motivated, able to efficiently work independently while completing scheduled tasks. Daily Functions and Duties Laboratory sample receipt and processing Daily use of EXCEL, Geosystems and eFieldData for recording of test results Calibration of field and laboratory equipment to industry codes and standards. Conducting, reporting, and analyzing the following tests: Soil and Aggregate testing Triaxial compression Direct shear Consolidation Proctors Grain size analysis Atterberg limits Permeability CBR Organic contents Specificity gravity pH Resistivity Concrete strength testing Preferred Qualifications familiarity with ASSHTO R18 Triaxial Compression testing Direct Shear testing Consolidation testing Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Visit: *************** and connect with BLE on LinkedIn , Facebook and X (Formally known as Twitter)

2026 Summer Internship Opportunities Bunnell Lammons Engineering invites applicants of aspiring engineering students to participate in our summer internship program. With Offices in Greenville, SC, Columbia, SC, Spartanburg, SC and Asheville, NC, we offer a dynamic environment for hands-on learning and professional development. Responsibilities: Interns will engage in various aspects of the construction process, including observing and documenting field activities. Additionally, they will contribute to pre-construction civil engineering design, planning, modification, permitting, and analysis for projects of varying sizes and scopes. Interns will tackle complex problems, collaborate across disciplines, and assist project managers in realizing our client's vision for a built environment. Other responsibilities include developing familiarity with federal, state, and local regulations, as well as Bunnell Lammons and client practices, procedures, and standards. Interns will also perform calculations, data reduction of test results, and engage in daily communication with contractors, technicians, and various others. Qualifications: Applicants should be in the process of pursuing an ABET-accredited engineering degree (Bachelors or Master's) in one of the following majors: Civil Engineering (with a focus on Geotechnical, Materials, or construction) Environmental Engineering (with a focus on water and air resources) Geology environmental Science Construction Engineering / Science About Bunnell-Lammons Engineering, Inc. (BLE): Bunnell-Lammons Engineering, Inc. (BLE) provides engineering and environmental solutions for projects in commercial, industrial, institutional, and infrastructure markets. BLE's services include environmental consulting and engineering, geotechnical engineering, construction engineering and inspections, and construction materials testing. The firm maintains a full-service in-house geotechnical and materials testing laboratory. Utilizing a team approach, BLE provides clients with the technical expertise required to successfully complete each project. Founded in 1996, BLE is headquartered in Greenville, SC with offices in Asheville, NC and Columbia, SC. For more information, visit *************** or follow BLE on LinkedIn.

Greenville, South Carolina Fulltime - Mid -Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to work closely alongside clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. As a Project Geotechnical Engineer within our Geostructures department you will be thrusted into a dynamic daily routine that blends fieldwork, analysis, and collaboration with other engineering professionals. You'll deal with the design, analysis and construction of structures like retaining walls, foundations, tunnels, and earth dams. Your daily routine can vary depending on whether you are primarily working in the office or the field. This might look like: team meetings, client meetings, reviewing geotechnical reports, design calculations, site visits, field inspections, monitoring instrumentation, lab analysis, reporting, design work, on-site problem solving, soil and material testing, report writing, design reviews and revisions, coordinating with other disciplines, and project management tasks. Responsibilities and Duties: Geotechnical design and analysis related to foundations, soil improvement, embankments, shoring, and retaining walls such as slope stability, resistance of lateral loads, settlement, bearing capacity, and seepage Supervise related field activities and crews to gather geotechnical site characterization data Project/Task management and proposal preparation support Evaluate routine laboratory and field data for inclusion in analysis, design, and reports Preparation of engineering reports, design calculations, construction drawings, technical specifications, and permit applications Review post-bid construction plans to ensure adherence to project specifications and requirements Collaborate with clients, contractors, and other stakeholders to ensure project requirements are met Demonstrate initiative and leadership in problem-solving and decision-making process Engage in continuous learning and professional development to enhance skills and expertise Utilize remote collaboration tools to effectively manage and communicate with team members and clients Minimum Skill Requirements: Bachelor's degree in civil or Geotechnical Engineering Professional Engineer License (P.E. in SC, NC, TN, GA or able to obtain a P.E. within 6 months) 4+ years of geotechnical experience with an emphasis in design and development of geotechnical deliverables including investigation and design reports, drawings, and specifications Strong analytical and report writing Advanced project management and organizational experience Intermediate experience in geotechnical software and tools (e.g., AutoCAD, GeoStudio, RocScience, LPILE, and MSE retaining wall software). Field experience and familiarity with construction sites Self-motivation and ability to manage time and priorities. Ability to work independently and as part of a team with strong verbal and written communication skills. Preferred Qualifications: Master's or advanced degree in civil or geotechnical engineering Position Type and Expected Hours of Work: This is a full-time position. Days and hours of work are Monday - Friday, 8:00 a.m. to 5:00 p.m. Able to work occasional weekends, holidays, and overtime as needed Travel: Must travel to the Greenville, SC office location on a monthly basis and have the ability to travel to client sites on occasion. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this position. Duties, responsibilities, and activities may change at any time with or without notice.

Do you want to build an impactful career to change the world for the better? Geosyntec has an exciting opportunity for a Senior Environmental Manager to help grow our environmental assessment and regulatory compliance services in our Charleston, SC office, or remotely from Columbia, SC. The experienced environmental consultant will help us grow our environmental management practice, lead client development, direct project teams, and develop our professional staff hand in hand with our other senior practitioners. The position will also support environmental assessment and regulatory compliance related to complex civil and environmental projects across the country. This position is well-suited for a talented, experienced individual who is interested in leading innovative and challenging projects, including the financial and technical evaluation, design, permitting, and construction stages of environmental projects and multimedia compliance programs. Geosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, scientists, technical and project employees serve our clients from offices across the world. Ranked by ENR as one of the top environmental engineering design firms, Geosyntec is internationally known for its technical leadership, broad experience, and exceptional client service. We invest in our people. Each employee is unique, and your career at Geosyntec will be too. We offer competitive pay and benefits, and well-being programs to support you and your family. To Learn More Visit: ********************************** Essential Duties and Responsibilities Collaboration and mentoring are cornerstones of Geosyntec's culture. You should expect to work closely with experienced professionals who will help integrate you into Geosyntec's culture as you advance to this next stage of your career. We operate under a sell-manage-do culture, and so we expect that you'd work on challenging technical projects while leveraging your existing knowledge and experience to help Geosyntec expand its current practices and capabilities through business development and client management. You may also be asked to take on project management responsibilities, along with staff management and development, and mentoring tasks. Some of the key responsibilities for this client-facing position include: Support Geosyntec's corporate clients in their compliance with environmental regulations and standards. This role may involve designing and implementing environmental compliance programs and providing guidance on regulatory requirements to minimize environmental risks as well as developing plans and procedures for managing air, water, and waste; Develop multimedia permit applications, negotiate permit conditions, and help develop strategies to comply with permit conditions; Project management, including planning and implementing investigation and remediation projects, budgeting and budget management, adherence to schedule, quality, client satisfaction, and profitability; Support clients with environmental aspects of transactions, reporting, litigation, and other business decisions; Project management and oversight of technical issues/work products; budgeting and budget management; adherence to schedule, quality, health, and safety protocols; client satisfaction; and profitability; Recruiting, managing, and mentoring junior staff and mid-career engineers and scientists; Reviewing and leading the preparation of technical documents, drawings, specifications, and proposals; Preparing for and participating in meetings with clients, regulatory personnel, and other parties; and At times, the position may also include fieldwork including contractor oversight and process troubleshooting tasks. Drive personal, company, and rental vehicles to client or company project or office sites, and other business locations, as needed. Education and Licensure Bachelor's degree in engineering (civil, chemical, or environmental preferred), geology, or another closely related sciences field. (required) Advanced degree (same as above). (preferred) Professional registration (i.e., P.Eng.). (preferred) Skills, Experience and Qualifications At least 8 years of progressive experience in the consulting industry; or an equivalent combination of education and experience. (required) Demonstrated working knowledge of local regulations. (required) Experience managing multi-disciplinary project teams. (required) Demonstrated success in the development and management of clients and growing a practice that sustains a group of professional junior staff. (preferred) Excellent leadership and detail-orientation skills. (preferred) Ability to succeed in a fast-paced consulting environment, handling multiple project assignments, meeting strict deadlines, and traveling to client facilities as needed. (required) Strong oral and technical writing skills. (preferred) Regular field work and overnight travel. (required) Health & Safety training, medical monitoring, and client-driven drug and background testing. (required) Valid U.S. driver's license and satisfactory driving record for business travel. (required) #LI-JC1 #LI-Onsite #LI-Remote

Report To: Department Manager Status: Full-Time, Exempt Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons Engineering (BLE), our core principles shape everything we do. We put people first, prioritizing our clients, employees, and community in every decision. We believe trust is earned through honesty, dependability, and delivering on our promises. Clear, timely communication keeps our clients and partners informed, while a commitment to excellence drives us to produce work that consistently sets the standard in our industry. Most importantly, we honor every commitment we make and believe that no challenge is too complex when the right people work together. These values define who we are, how we operate, and the kind of team we continue to build. Notice to applicants: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Position Overview We are seeking a highly motivated and experienced Project Engineer to join our dynamic team. This pivotal role will be responsible for the successful planning, execution, and closure of a wide range of environmental, geotechnical, and civil engineering projects. The ideal candidate will possess a strong technical background, demonstrated leadership abilities, and a commitment to delivering high-quality solutions for our diverse client base. This position requires hands-on project engineering experience and a proven track record in managing complex engineering assignments from conception through completion. Our Geotechnical Group focuses on serving projects for our local municipal, industrial, residential, and commercial clients. These projects span a multitude of geotechnical support roles, from geotechnical exploration to geotechnical support during construction. Minimum Job Requirements Bachelor's degree in civil engineering, construction management, or related field Licensed Professional Engineering (PE) in South Carolina or ability to obtain reciprocity where firm operates. Minimum 5-12 years of experience in geotechnical engineering and/or materials testing with 3+ years in a supervisory or management role Knowledge of geotechnical design and construction requirements. Knowledge of geosynthetics Skills & Competencies Apply advanced knowledge of civil and geotechnical engineering principles to project design, analysis, and problem-solving. Conduct technical analyses, calculations, and design for various engineering projects, including but not limited to site development, foundation design, retaining walls, earthwork, and pavements. Prepare detailed engineering reports, specifications, drawings, and other project documentation. Utilize engineering software and tools for design, modeling, and data analysis (e.g., AutoCAD, Civil 3D, GeoStudio, gINT, Tablogs). Perform site investigations, field inspections, and data collection to support project objectives. Interpret and apply relevant local, state, and federal regulations, codes, and industry standards (e.g. ASTM, IBC). Key Responsibilities Team Leadership and Development Mentor and provide technical guidance to junior engineers, designers, and field staff. Delegate tasks effectively and oversee the work of project team members to ensure accuracy and adherence to project requirements. Foster a collaborative and supportive team environment that encourages professional growth and knowledge sharing. Conduct performance feedback sessions and contribute to the professional development of team members. Lead geotechnical investigations including site reconnaissance, drilling oversight, sampling, and field data collection. Assign soils laboratory testing. Client Relationship Management: Serve as a primary point of contact for clients, maintaining strong professional relationships throughout the project lifecycle. Effectively communicate project updates, technical findings, challenges, and solutions to clients in a clear and concise manner. Address client inquiries and concerns promptly and professionally, ensuring high levels of client satisfaction. Identify opportunities for repeat business and cultivate long-term client partnerships. Quality Control and Assurance Implement and enforce quality control procedures to ensure all project deliverables meet technical standards, and client expectations. Conduct thorough reviews of engineering designs, calculations, reports, and drawings. Identify and mitigate potential quality issues proactively. Participate in internal and external audits to ensure compliance with quality management systems. Project Planning and Scheduling Develop comprehensive project plans, including scope definition, objectives, deliverables, timelines, and resource allocation. Create and manage project schedules using appropriate scheduling tools Monitor project progress against established timelines and milestones, making adjustments as needed. Forecast resource needs and ensure optimal utilization of personnel and equipment. Risk Management and Compliance Identify potential project risks (technical, financial, regulatory, safety) and develop mitigation strategies. Stay abreast of changes in regulations and industry best practices. Cross-Functional Collaboration Collaborate effectively with internal departments to ensure integrated project delivery. Coordinate with external stakeholders, such as owners, contractors, subcontractors, and vendors. Participate in interdisciplinary project meetings and contribute to holistic problem-solving. Contracts and Vendor Management Assist in the preparation of proposals, scopes of work, and contract documents. Review and understand project contracts, ensuring compliance with terms and conditions. Manage and oversee the performance of subcontractors and vendors, ensuring adherence to contractual obligations and quality standards. Evaluate vendor proposals and recommend selections based on technical capabilities and cost-effectiveness. Business Development Identify and pursue new project opportunities through existing client relationships and networking. Contribute to the preparation of proposals and presentations to secure new business. Represent the firm at industry events, conferences, and professional organizations. Stay informed about market trends and clients need to identify areas for growth. Performance Analytics Monitor project financial performance, including tracking budgets, expenses, and profitability. Analyze project metrics to identify areas for improvement in efficiency, cost-effectiveness, and quality. Prepare regular project status reports for management, including financial summaries and performance indicators. Conduct post-project reviews to capture lessons learned and apply them to future projects. Why Join Us? Industry-leading reputation with a diverse and growing project portfolio. Collaborative, supportive work environment where your leadership makes a visible impact. Opportunities for professional growth and advancement within a dynamic, expanding organization. Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Educational re-imbursement programs Vehicle allowance (conditions apply)

As a Senior Engineering Technician for BLE, you will work under the immediate supervision of a registered professional engineer. Collaborating with construction site managers and engineers, you will be responsible for leading a team of 10 to 15 junior ET's performing inspections and sampling services crucial to quality assurance in construction projects. Key responsibilities include the collection of concrete, soil, and site materials for testing, continued monitoring of general contractor activities, encompassing onsite testing, and reporting of earthwork, soil construction, foundation/subgrade evaluation, reinforced steel, concrete placements, masonry, and asphalt testing. You will be responsible for writing and reviewing detailed daily reports, including test results summaries of construction site observations. Minimum Job Requirements Must have five (5) plus years of Special Inspections Technician experience and 2 years of supervisory experience, OR more than 10 years' experience in lieu of certifications and exhibits skills appropriate for this technician level. High School Diploma or General Education (GED) Valid Driver's License with Clean Motor Vehicle Driving history (3 years) Ability to work outdoors on a construction site in all seasons and weather conditions for extended periods. You must be self-motivated and efficiently work independently while completing scheduled tasks. Must be able to effectively communicate both verbally and in writing with team members, BLE leadership, clients, local, state, and federal authorities of all levels. Ability to attend to detail and work in a time-conscious and time-effective manner. Must have the following active certifications: ACI 1 ICC Soils Inspector ICC Nuclear Gauge ICC Reinforced Concrete ICC Masonry Special Inspector Basic knowledge in the operation of smartphones and computers for communication and record keeping (MS Office applications Word, Excel, and Outlook). Ability to stand, walk, kneel, stoop, bend, lift (50 pounds), tug, and pull, on unstable, unpaved ground. Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/Long term disability Paid Vacation Paid Sick Leave Eight (8) paid holidays. Company Vehicle / Gas card Time and Half overtime pay. 100% of travel expenses are covered by BLE. Education re-imbursement program(s) Employee referral Program Certification Bonuses

As a Senior Geologist for Bunnell Lammons Engineering, Inc. (BLE), you will assume a pivotal role in our organization's dedication to excellence within our Hydrogeological Services Department. You will be charged with leading complex geological projects, analyzing data and communicating your findings to stakeholders. Minimum Job Requirements Bachelors in geology, or civil/environmental engineering, environmental science or related field. 10 years of senior level experience with 5+ years direct experience managing projects, supervising and mentoring staff, preparation and review of technical proposals, regulatory agency interactions and negotiations, and providing QA/QC of deliverables. Professional Geologist (PG) credentials. Ability to design field sampling programs, manage multiple subcontractors, as well as interpret geological, hydrogeological and chemical data from contaminated sites. Proficiency in groundwater statistics. Effective technical writing, strong oral communication, presentation, and time management skills. Excellent leadership and client management skills. Ability to work independently and as part of a team to meet organization and project objectives. Technically adept, flexible, and forward thinking. Exhibits ability to successfully track and meet budgets and schedules. Exhibits attention to detail, and able to work under periodic time constraints. Demonstrated knowledge of Federal, State, and Local solid waste and mining requirements. Willingness to travel regionally for short periods of time. What you will be doing daily Provide leadership, training, mentoring and support to junior staff and serve as a regional soil and groundwater subject matter expert. Manage and analyze groundwater compliance at landfill facilities. Prepare and review Alternative Source Demonstrations (ASD), Assessment of Corrective Measures (ACM), and Corrective Action Plans (CAP) Manage and prepare Hydrogeological Assessment Reports (HAR) for both existing and greenfield landfill and mine sites. Manage and prepare geological economic resource evaluations for both existing and greenfield mine sites. Manage and prepare Environmental Monitoring Plans (EMP) for existing and greenfield landfill sites. Manage subsurface investigation and remediation project's scope, schedule, budget, staff, and subcontractors for existing public and private sector clients. Provide peer review of project deliverables, e.g. reports, proposals, cost estimates and plans for national, regional and local clients. Develop and update proposal, report, plan, and protocol templates for hydrogeological and geologic evaluations, disseminate updates to branch managers and project managers. Conduct internal audits of projects to ensure project managers are in conformance with both industry and company standards. Act as a liaison and advocate for clients with state and federal environmental regulatory agencies. Preferred Qualifications M.S. Degree Experience with groundwater modeling GIS and/or CAD Experience OSHA 40-hour HAZPOWER Certification. Leadership Behaviors STRATEGIC - Take a long-range, broad approach to problem-solving and decision-making through objective analysis, thinking ahead, and disciplined planning and execution. COMMUNICATION - Explaining things clearly and thoroughly; expressing thoughts and ideas readily; keeping others well informed; setting forth viewpoints; being explicit about what is needed and wanted. EXCITEMENT - Getting others enthusiastic and involved; engaging in a high-energy manner; generating excitement; being lively and dynamic; creating a high-activity environment. MANAGEMENT FOCUSED - Making things happen; being influential; taking control of a situation; providing guidance to others; and acting as a facilitator; Always leave or end conversations with clients and co-workers feeling better for having met you. Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Educational re-imbursement programs Vehicle allowance (conditions apply) Visit: *************** and connect with BLE on LinkedIn , Facebook and X (Formally known as Twitter) Job Posted by ApplicantPro

Bunnell-Lammons Engineering, Inc. (BLE) has an opening for a Code Compliance Inspector to join our team in Greenville, SC. The primary responsibility of this position is to provide Building, Mechanical, Plumbing, and Electrical code compliance inspections. Responsibilities Perform inspections for a wide variety of projects including commercial, institutional, industrial and residential buildings. Inspections should verify construction conforms to all applicable codes and project plans and specifications. The ability to work independently, communicate effectively and maintain professional working relationships with clients and coworkers. Interaction with representatives of Office of School Facilities (OSF) and the Office of State Engineer (OSE). Produce detailed inspection reports. Requirements Valid Driver's License Ability to pass pre-employment Drug screen 5 years of experience in Code Inspections ICC Building, Electrical, Mechanical, and Plumbing Inspector Certifications SCLLR Registration Self-motivation and ability to manage time and priorities. Ability to complete projects and tasks on an individual basis, as well as work collaboratively as part of a project team. Capable of developing and nurturing client relationships and pursuing new project opportunities BLE offers excellent company benefits and a competitive salary. Salary is commensurate with experience and certifications. Job Type: Full-time

Lexington, South Carolina Full- Time - Entry-Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to collaborate closely with clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are conducted as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Job Description As a Project Engineering Technician I for Bunnell-Lammons Engineering, Inc. (BLE), you will be working under the immediate supervision/direction of a registered professional engineer. You will work as a team member alongside site managers and engineers to perform the required inspection or sampling services. Our special Inspections technicians play a critical role in the quality assurance for every construction project no matter how large or small. Special Inspections Technicians actively collect concrete, soil, and other site materials for testing along with the continuous monitoring of general contractor activities, which may include but are not limited to onsite testing and reporting of earthwork and soil construction; foundation/subgrade evaluation; reinforcing steel; concrete placements; masonry as well as asphalt testing. Special Inspections Technicians are also responsible for accurately preparing daily reports for submission to the assigned project engineer. These reports not only include your test results summary, but detailed construction site observations as well. Minimum Job Requirements Must be at least eighteen (18) years of age. High School Diploma or General Education (GED) Valid Driver's License with Clean Motor Vehicle Driving history (3 years) Ability to work outdoors on a construction site in all seasons and weather conditions for extended periods of time. You must be self-motivated, able to efficiently work independently while completing scheduled tasks. Must be able to effectively communicate both verbally and in writing with team members, BLE leadership, clients, local, state, and federal authorities of all levels. Must be detail oriented and work in a time conscious and time effective manner. Basic knowledge in the operation of smartphones and computers for communication and record keeping (MS Office applications Word, Excel, and Outlook). Ability to stand, walk, kneel, stoop, bend, lift (50 pound), tug and pull, on unstable, unpaved ground. Applicant Requirements All newly employed Special Inspection Technicians are mandated to acquire the Special Inspector general Requirements Certification and one of the three (3) additional certifications within three (3) months of beginning the position, and the remaining two (2) certifications within the following eighteen (18) months, such that the technician has acquired, within two (2) years, the following certifications: Special Inspector general Requirements Certification - GR (Within three (3) months of employment)). Reinforced Concrete Codes -47C Plans - 47P Structural Masonry Codes - 84C Plans - 84P Soils Codes - ECC Soils Plans - ECP Preferred Qualifications Two years of previous construction materials inspection Industry certified inspector Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Company Vehicle/gas card Time and a half overtime pay. 100% of travel expenses are covered by BLE. Education re-imbursement program(s) Employee referral program Certification bonuses Visit: *************** and/or connect with BLE on LinkedIn

RESPONSIBILITIES: The primary responsibilities include, but are not limited to: Performing geotechnical evaluations related to new or expanding landfill facilities, including settlement, slope stability, seepage, evaluation of liner systems, leachate collection and closure cap materials, drainage layer and filtration calculations. Managing and directing subsurface explorations by soil test borings, CPT, Geoprobe and geophysical methods of site conditions for use in geotechnical evaluation and analysis. Select, locate and quantify low permeability soils, soils suitable for structural fill, and geotechnical drilling to identify rock and groundwater. Construction Quality Assurance (CQA), responsibilities from pre-construction to monitoring, sampling, and testing completion and reports to state regulatory agencies during landfill construction projects. Implements technical requirements to complete client projects by directing field staff to sample, test, and collect data and/or document on-site activities at various client sites. Evaluates routine laboratory and field data for inclusion in reports. Performs calculations using engineering formulas and skills. Prepares reports and correspondence regarding the direction of assigned projects. A variety of field and office assignments should be expected. POSITION REQUIREMENTS AND BASIC QUALIFICATIONS: Bachelor's degree in Geotechnical Engineering and/or Civil Engineering 0-4 years of working experience in a geotechnical engineering consulting, project management, GeoStructure design, or solid waste landfill CQA position. Salary will be commensurate with experience. EIT certification or ability to obtain within 1 year. Able to work out in the field up to 50% of the time, traveling throughout the southeastern United States (Virginia, North Carolina, Tennessee, South Carolina, Georgia, North Floriday and parts of Alabama). Strong analytical skills and experience with variety of geotechnical analysis, evaluations, and calculations. Working proficiency in AutoCAD and Civil3D Working experience with Coal Combustion Residual (CCR) containment is preferred. Experience providing verbal and written recommendations, producing reports, calculations, technical figures, charts, drawings, and specifications. Field experience and familiarity with construction sites. Self-Motivated and ability to manage time and priorities. Ability to complete projects and tasks on an individual basis, as well as work collaboratively as part of a project team. History and interest in continued involvement in professional / industry associations. ABOUT BUNNELL-LAMMONS ENGINEERING, INC.: Bunnell-Lammons Engineering is an environmental consulting firm providing efficient and cost-effective solutions four our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork, being proactive and responsive to our client's needs. We recognize that achieving our goals and building our legacy requires both hard work and creativity from all team members. When you join our team, we encourage you to see just what you can achieve as part of our great family-oriented team.

Spartanburg South Carolina Full- Time, Mid-Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to work closely alongside clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are carried out as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Job Description As a Geotechnical Engineer at Bunnell Lammons Engineering, Inc. (BLE), you will assume a pivotal role in our organization's dedication to excellence within our Geotechnical Department. Geotechnical Engineers provide engineering and consulting services for a variety of projects and clients. This may include but is not limited to performing and/or leading geotechnical field investigations, computer modeling, engineering calculations, laboratory testing, design consultation, construction observation, and engineering reporting for consultation for landfills, mines, and other large industrial construction projects. Minimum Job Requirements Bachelor's in Geotechnical or Civil Engineering. 2-4 years of experience in geotechnical engineering consulting, project management, or geostructure design. Currently hold your Engineer-in-Training (EIT) certification. Ability to attend to detail and work in a time-conscious and time-effective manner. Knowledge of project management, understanding of project baseline documentation, costs, and schedules. Working proficiency in AutoCAD and Civil3D. Intermediate to Advanced level proficiency in MS Office applications (Word & Excel). Must be self-motivated, able to efficiently work independently while completing scheduled tasks, and/or lead a project team. Must be able to effectively communicate, both verbally and in writing with team members, BLE leadership, clients, peers, and regulatory authorities of all levels. Daily Functions and Duties Performing geotechnical evaluations related to new or expanding environmental facilities including settlement, slope stability, seepage, evaluation of liner systems (Clay & Geosynthetics), and geotechnical stability of mineral and aggregate mines. Managing and executing subsurface explorations by soil test borings, CPT, Geoprobe, and geophysical methods of site conditions for use in geotechnical evaluation and analysis. Select, locate, and quantify low-permeable soils, high-permeability soils, soils suitable for structural fill, and geotechnical drilling to identify rock and groundwater. Directing field staff to sample soils and collect data. Document on-site activities at various project sites. Evaluating routine laboratory and field data for inclusion in reports. Developing spreadsheets for geotechnical monitoring data, including those related to surface movement, and piezometric conditions. Preparing calculation packages, technical reports, letters, memoranda reports, and email correspondence to document the engineering analysis performed on behalf of the client. Preferred Qualifications Master's degree in civil or Geotechnical engineering PE Licensure Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Educational reimbursement programs Vehicle allowance (conditions apply) Visit: *************** and connect with BLE on LinkedIn , Facebook and X (Formally known as Twitter)

Bunnell-Lammons Engineering, Inc. (BLE) has an opening for a Code Compliance Inspector to join our team in Columbia, SC. The primary responsibility of this position is to provide Building, Mechanical, Plumbing, and Electrical code compliance inspections. Responsibilities Perform inspections for a wide variety of projects including commercial, institutional, industrial and residential buildings. Inspections should verify construction conforms to all applicable codes and project plans and specifications. The ability to work independently, communicate effectively and maintain professional working relationships with clients and coworkers. Interaction with representatives of Office of School Facilities (OSF) and the Office of State Engineer (OSE). Produce detailed inspection reports. Requirements Valid Driver's License Ability to pass pre-employment Drug screen 5 years of experience in Code Inspections ICC Building, Electrical, Mechanical, and Plumbing Inspector Certifications SCLLR Registration Self-motivation and ability to manage time and priorities. Ability to complete projects and tasks on an individual basis, as well as work collaboratively as part of a project team. Capable of developing and nurturing client relationships and pursuing new project opportunities BLE offers excellent company benefits and a competitive salary. Salary is commensurate with experience and certifications. Job Type: Full-time

Bunnell-Lammons Engineering, Inc. is seeking to hire a full-time Geotechnical / Construction Materials Testing Technician to visit our solid waste construction sites throughout the southeast to ensure soil, geosynthetics, and concrete are meeting construction standards. This engineering technician position earns a competitive salary, depending on experience and certification and generous benefits. The company provides in-house training, mentorship, a vehicle, and all necessary safety equipment. In addition, allowances for travel living expenses are provided for out-of-town work. Our benefits include medical, dental, vision, life insurance, and a 401(k) option. Our team works hard. We recognize their dedication through 5 year, 10 year, and 15 year service awards. Additionally, we provide fun activities, including Christmas parties, employee appreciation lunches, and more! If this sounds like the opportunity that you've been looking for, apply today! ABOUT BUNNELL-LAMMONS ENGINEERING, INC. We are a geotechnical and environmental consulting firm providing efficient and cost-effective solutions for our clients, resulting in long-term relationships. We service commercial, financial, industrial, municipal, construction, and architectural design engineering clients across the southeast. Our highly qualified staff eagerly turns tough challenges into finished projects. Drawing on the power of combined expertise, we're big believers in teamwork. And, we recognize that achieving our goals and building our legacy requires both hard work and creativity. When you work here, we encourage you to see just what you can achieve as part of a great, family-oriented team. A DAY IN THE LIFE OF A GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN Working under the immediate supervision of a registered professional engineer, you work as a team member alongside site managers, general contractors, and engineers to perform the required inspection or sampling services at various environmentally regulated solid waste landfill construction projects. You monitor general contractor activities, onsite testing, and reporting of earthwork and soil construction as well as geosynthetic baseliner, closure cap, piping, and gas extraction systems. In addition, you actively collect concrete, soil, and other site materials for testing in order to ensure construction standards and specifications are being met. Being safety conscious is at the heart of all you do. As part of BLE's valuable team of engineering technicians, you are proud to be in the construction field providing quality assurance and doing your part to maintain professional and personable client-company relationships. TECHNICIAN QUALIFICATIONS Relevant education and experience Schedule flexibility Ability to work out of town for several weeks at a time Can navigate smartphones and computers for communication and recording time worked Ability to comfortably lift 50 lbs walk on slopes and perform the physical requirements of the position Efficiently work with hand tools and testing apparatuses Able to pass a drug screening Have a valid driver's license and clean driving record Enjoy working outdoors in all types of weather conditions ACI, NICET, and ICC Certifications are a plus! Are you a team player who can work under minimal supervision? Do you have great communication skills, both written and verbal? Do you thrive working outside on construction sites? Are you eager to be mentored by a professional engineer? If so, you may be perfect for this position! GEOTECHNICAL / CONSTRUCTION MATERIALS TESTING TECHNICIAN WORK SCHEDULE Work schedule can vary depending upon the time of year but typically follows normal construction daylight hours. As a Geotechnical / Construction Materials Testing Technician, schedule flexibility is preferred. ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this engineering technician job, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you!

Camden, South Carolina Full- Time - Entry-Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to collaborate closely with clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are conducted as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Job Description As a Project Engineerig Technician I for Bunnell-Lammons Engineering, Inc. (BLE), you will be working under the immediate supervision/direction of a registered professional engineer. You will work as a team member alongside site managers and engineers to perform the required inspection or sampling services. Our special Inspections technicians play a critical role in the quality assurance for every construction project no matter how large or small. Special Inspections Technicians actively collect concrete, soil, and other site materials for testing along with the continuous monitoring of general contractor activities, which may include but are not limited to onsite testing and reporting of earthwork and soil construction; foundation/subgrade evaluation; reinforcing steel; concrete placements; masonry as well as asphalt testing. Special Inspections Technicians are also responsible for accurately preparing daily reports for submission to the assigned project engineer. These reports not only include your test results summary, but detailed construction site observations as well. Minimum Job Requirements Must be at least eighteen (18) years of age. High School Diploma or General Education (GED) Valid Driver's License with Clean Motor Vehicle Driving history (3 years) Ability to work outdoors on a construction site in all seasons and weather conditions for extended periods of time. You must be self-motivated, able to efficiently work independently while completing scheduled tasks. Must be able to effectively communicate both verbally and in writing with team members, BLE leadership, clients, local, state, and federal authorities of all levels. Must be detail oriented and work in a time conscious and time effective manner. Basic knowledge in the operation of smartphones and computers for communication and record keeping (MS Office applications Word, Excel, and Outlook). Ability to stand, walk, kneel, stoop, bend, lift (50 pound), tug and pull, on unstable, unpaved ground. Applicant Requirements All newly employed Special Inspection Technicians are mandated to acquire the Special Inspector general Requirements Certification and one of the three (3) additional certifications within three (3) months of beginning the position, and the remaining two (2) certifications within the following eighteen (18) months, such that the technician has acquired, within two (2) years, the following certifications: Special Inspector general Requirements Certification - GR (Within three (3) months of employment)). Reinforced Concrete Codes -47C Plans - 47P Structural Masonry Codes - 84C Plans - 84P Soils Codes - ECC Soils Plans - ECP Preferred Qualifications Two years of previous construction materials inspection Industry certified inspector Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Company Vehicle/gas card Time and a half overtime pay. 100% of travel expenses are covered by BLE. Education re-imbursement program(s) Employee referral program Certification bonuses Visit: *************** and/or connect with BLE on LinkedIn