Burns & McDonnell jobs in Austin, TX - 88 jobs

**Description** Burns & McDonnell's Environmental Services (ENS) Global Practice in Texas is actively seeking a Routing & Siting Project Manager to support, manage, and develop business for electric transmission line routing studies, environmental surveys, National Environmental Policy Act (NEPA) analysis, and land use planning/permitting services. This position provides the opportunity to challenge yourself and grow professionally within one of the leading engineering and environmental firms, including ENR No.1 design firm ranking in Transmission and Distribution. Burns & McDonnell has been voted as a Best Place to Work in cities across the United States. The candidate should have an established and successful history of managing and leading tasks for both small and large-scale projects, including but not limited to assisting with proposals and cost estimates, executing and overseeing every level of project tasks, and assisting with developing strategic marketing plans. The successful candidate should be a subject matter expert, and technical lead and author on environmental studies and analyses to support applications for certificates of convenience and necessity pursuant to authorization from the Public Utilities Commission (PUC) of Texas. Candidates with demonstrated experience providing expert testimony are strongly preferred. Other areas of expertise may include NEPA analysis, resource impact assessment and consultation, and land use planning. This position also includes managing multidisciplinary teams in the development of permit applications and analyzing environmental data supporting the development of environmental documents and studies for various types of projects, including high-voltage transmission lines, renewables, power generation construction activities, and gas transmission. The Environmental Routing & Siting Project Manager will work within our ENS Global Practice to perform the following primary duties: + Project management, team leadership, and mentoring of junior staff. + Prepare routing studies and evaluations pursuant to CCN applications for approval by the Texas PUC. + Prepare routing studies and evaluations pursuant to regulatory requirements for other applicable state applications. + Prepare environmental studies/evaluations, impact analysis, and NEPA documentation for projects serving a variety of markets. + Conduct pre-application meetings with jurisdictions, interact effectively with county and local officials, prepare and submit land use permits, and prepare material for public open houses and public outreach. + Work independently and demonstrate a high level of competence in the area of technical report writing related to NEPA compliance, as well as other types of technical reports and regulatory (Federal, state, local) permitting documents. + Work with clients, resource agencies, and environmental and technical staff to prepare environmental documents and related technical studies. + Develop, cultivate, and strengthen existing and new client relationships. + Other duties as assigned. **Qualifications** + B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management or related field from an accredited program. + Minimum 7 years related professional experience in a wide variety of areas ranging from leading and managing technical teams, project management, business development, and the ability to effectively balance direct and indirect utilization rates. + Specific demonstrated experience supporting and acquiring CCN certificates for electric transmission line projects. + Experience with the resources and regulatory agencies in Texas. Local and regional knowledge and relationships with industry and regulatory agencies is preferred. + Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.). + Solid time management and follow-through skills, with the ability to simultaneously work on and manage multiple tasks/projects with tight deadlines. + Strong analytical and problem-solving skills. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Project Management **Primary Location** US-TX-Houston **Other Locations** US-TX-Fort Worth, US-TX-Austin **Schedule:** Full-time **Travel:** Yes, 50 % of the Time **Req ID:** 254915 **Job Hire Type** Experienced #LI-JJ #ENS N/A

Together, we own our company, our future, and our shared success. As an employee-owned company, our people are Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. Company : Black & Veatch Corporation Req Id : 108222 Opportunity Type : Staff Relocation eligible : Yes Full time/Part time : Full-Time Project Only Hire : No Visa Sponsorship Available: No Why Black and Veatch Black & Veatch allows you to lend your talent and perspective to humanity's biggest challenges in a flexible environment where you are empowered to grow and explore new possibilities. We offer competitive compensation; 401K match and benefits that start day 1. Our hybrid environment allows you to balance your work and personal life. At Black & Veatch, you own your career with purpose and meaning. You are empowered to grow and explore new possibilities at every step of your career journey. Bring your big ideas knowing you are safe to be who you are and speak up with concerns or questions and put your diverse talents and perspectives to use. Our Texas and U.S. Central region water solutions business has seen consistent growth driven by our clients' needs to address challenges stemming from population growth, aging infrastructure, system reliability and resilience concerns, the need to improve operational efficiency, water quality regulations, circular water/one-water initiatives, and the use of "data" to help guide decision making. This position represents a strategic business opportunity to help the company grow its market share by providing best-in-class project management for water and wastewater infrastructure planning and design projects. The Opportunity As the Project Manager, you will have the opportunity to: Lead projects from planning through construction. Present updates to external client stakeholders and support decision-making. Provide oversight of the schedule and budget using Black & Veatch's internal process and manage large inter-discipline teams of internal and subconsultant resources. Manage all aspects of medium to large water, wastewater and stormwater projects, including risk to cost, schedule, quality Be responsible for the day-to-day successful execution of contracted engineering, procurement, and construction scope in the areas of performance, financial metrics, planning, schedule, quality, contractual compliance, safety, and client satisfaction Provide for the successful staffing of the project Manage and lead medium to large teams of multi-discipline professionals Coordinate and integrate the activities associated with the engineering, procurement, construction, and startup elements of the project team, including the activities of all sub consultants. This role will be designated in our business traveler work schedule. We are committed to providing a healthy, safe and flexible work environment for all professionals while helping them remain productive and connected. Our business traveler work schedule includes BV professionals who travel consistently 60% or more of their work schedule and provide flexibility around being in an office location. * Days during travel weeks that are non-travel days, professionals may work in the office or at a remote location. * On non-travel work weeks, professionals may work in a BV office location 3 days a week and in a remote location 2 days a week. The Team Black & Veatch's Governments & Communities focuses on specific infrastructure needs of municipalities, state and local governments, and specialized physical and digital infrastructure solutions for government and federal agencies. By joining our market sector, you will be able to provide infrastructure for community benefit. Check out one of our recent projects: T-Bar Well Field Project Delivers 20 Million Gallons of Water Per Day to 50,000 Homes | Black & Veatch Key Responsibilities Manages medium to large engineering projects involving multiple clients or partners Manages multiple services clients where the project team, client structure and/or project location present challenges Obtains new/repeat business on medium to large size projects; supports contract negotiations with clients Manages risk which may include lump sum, new technology, markets or new clients Acts as a project manager among responsibilities is management of a project team Preferred Qualifications Professional Engineer (PE) license in Texas 12+ years of relevant water engineering experience including but not limited to: water and wastewater infrastructure planning, design-build, asset management, detailed design, and construction Knowledge of local, federal, and state permitting requirements and funding mechanisms Minimum Qualifications * Bachelor's degree or equivalent experience. * All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. Salary Plan PMT: Project Management Job Grade 019 Black & Veatch endeavors to make ****************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our accommodations request form. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here and here. Notice to External Search Firms: Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs.

**Graduate Engineer, Electrical - Substation** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 112653 **Opportunity Type :** College full time **Relocation eligible :** Yes **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **The Opportunity** As an entry-level Electrical Engineer at Black & Veatch, you will help address some of the world's most pressing infrastructure challenges. You will have the opportunity to work on a wide range of projects to meet our clients' needs and contribute to the growth and success of Black & Veatch. You will be assigned to a functional area in our Substation department. In this position, potential office locations include: + Austin, TX + Dallas, TX + Houston, TX **Key Responsibilities** Engineering Standards: + Develops familiarity by reading, understanding and applying departmental design guides, standards, systems, applicable engineering codes and Black and Veatch policies and procedures Quality / Continuous Improvement: + Develops an understanding and complies with the Black and Veatch quality program + Supports continuous improvement and change management efforts Engineering Production: + Contributes to preparation of less complex engineering deliverables such as drawings, reports, specifications, and studies of limited scope + Performs routine research and develops recommendations for equipment and/or materials selection + Collects, assimilates, and manages data for engineering work + Prepares basic engineering calculations following standard methods and principles used in similar engineering analysis + Understands and adheres to budget, schedule, and quality requirements Project Coordination: + Shares information with others as requested + Coordinates with others when directed by supervisor or project leadership Client Focus: + Focuses on the needs of internal clients (project team leadership) while attempting to gain basic understanding of external client's main interests and drivers + May provide support to business development or pursuit activities Knowledge Sharing, Innovation and Technology: + Shares current knowledge of latest technology and processes **Preferred Qualifications** + Coursework and knowledge of Power Systems, Motors, Transformers, Renewable Energy, Power Delivery, or Three Phase Power Calculations + Cumulative GPA of 3.0 or higher + Previous internship experience + Basic knowledge of engineering design principles, design guides and standards + Insights of industry trends and developing technologies + Fundamental knowledge of construction practices and principles + Skilled in Problem Solving, Written Communication, Informing, and Peer Relationships **Minimum Qualifications** Requires a bachelor's degree in Electrical engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Work Environment** Hybrid or flexible work options may be offered after the first 90 days of employment based upon manager discretion, job performance and work assignments. **Salary Plan** ENG: Engineering **Job Grade** 014 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Nearest Major Market:** Austin **Job Segment:** Electrical Engineering, Construction, Engineer, Electrical, Engineering

**Site Crane and Rigging Superintendent 2 - Texas** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 113088 **Opportunity Type :** Staff **Relocation eligible :** No **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Job Summary** By joining our BV Construction group, you will have the ability to develop and enhance your skills in an on-site, hands-on environment. We are committed to providing our construction professionals with expert training, career development, and career advancement to allow for continuous professional development. Our management is committed to the latest advances in technology, above class support and sustainability to bring our clients the best service in safety, quality, and final product. Functions in our group include safety, project field management, construction management, quality control, start up and decommissioning and field engineering. This is a field assignment and requires travel. \#LI-KC1 #riggingsuperintendent #cranesuperintendent #construction The Site Crane and Rigging Superintendent (SCRS) serves as the primary authority responsible for the safe, compliant, and effective execution of crane and rigging operations at the project site. The SCRS acts as the central point of accountability between site teams and corporate Crane and Rigging leadership, ensuring all lifting activities are properly planned, executed, evaluated, and documented in accordance with company procedures and applicable regulatory standards. **Key Responsibilities** **Oversight of Crane Inspections** Ensure all cranes on site receive required annual, monthly, and frequent inspections in accordance with manufacturer requirements, OSHA regulations, and company policy. Verify inspection documentation is accurate, current, and properly maintained. Confirm deficiencies are corrected prior to crane use and remove equipment from service when safety concerns arise. **Lift Director Responsibilities** Serve as the designated Lift Director for critical and complex lifts. Oversee planning, review, and execution of lift plans, lead pre-lift meetings, verify rigging configurations and load calculations, and stop operations if unsafe conditions develop. **Rigging Evaluation Oversight** Oversee the rigging competency and evaluation program. Ensure riggers are evaluated, documented, and assigned tasks consistent with their competency level. Submit rigging evaluations and address gaps through coaching or retraining. **Compliance and Coordination** Coordinate with the Corporate Crane and Rigging Department to submit inspections, lift plans, certifications, and rigging evaluations. Ensure compliance with company policy, OSHA, ASME, and manufacturer requirements. **Central Accountability Role** Serve as the single point of accountability for crane and rigging operations. Act as liaison between project management, site supervision, crane crews, and corporate leadership while promoting a strong safety culture. **Authority** Stop any crane or rigging operation deemed unsafe or non-compliant and require revisions to plans, methods, or assignments. **Preferred Qualifications** Construction Management or Engineering degree. Training on reporting safety, cost, quality, and schedule information. Construction management and contract administration training. Preferred skills: + Knowledge of Company construction guides and manuals + Crane and Rigging Construction experience + Experience with Lift Plans + Knowledge of union agreements and jurisdictional issues + Construction Safety awareness and comprehension + Conflict Management Skills + Multi-tasking Ability (prioritize, organize, schedule work) + Problem-solving Skills (identify, analyze, research, evaluate, resolve) + Project Management Skills + Supervisory Skills + Communication Skills + Constructability Knowledge in Discipline + Constructability Knowledge in other disciplines + Risk Assessment/Management + Cost code labor productivity systems + Time Reporting Policies and Procedures + Construction Guides and Standards + Computer Skills **Minimum Qualifications** 1+ years experience of construction field leadership on equivalent projects. Valid Driver's License. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Certifications** OSHA 10 certification. **Work Environment/Physical Demands** Physical Demands: - Lift and carry heavy items weighing up to 50 pounds. - Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. - See and hear naturally or with correction. - Full range of motion and flexibility consistent with requirements of the job duties. - Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. - Requires repetitive movement. - May require work above 5 feet in height. - Climb and maintain balance on steel framework, stairs, ladders and scaffolds. - Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions. Work Environment: - Typical construction site environment: - Requires working in cramped work spaces and getting into awkward positions. - Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. - Requires working in extremely bright or low lighting conditions - Includes exposure to sounds and noise levels that are distracting or uncomfortable. - Work around hazardous equipment. - Typical office environment. - This position is considered a safety sensitive position. **Salary Plan** CNS: Construction Services **Job Grade** 015 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Job Segment:** Construction, Field Engineer, Engineer, Engineering

**Civil Mechanical Inspector - Water - Dallas** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 112479 **Opportunity Type :** Staff **Relocation eligible :** Yes **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Job Summary** By joining our BV Construction group, you will have the ability to develop and enhance your skills in an on-site, hands-on environment. We are committed to providing our construction professionals with expert training, career development, and career advancement to allow for continuous professional development. Our management is committed to the latest advances in technology, above class support and sustainability to bring our clients the best service in safety, quality, and final product. Functions in our group include safety, project field management, construction management, quality control, start up and decommissioning and field engineering. Be the day-to-day on-site representative of the Owner(s) and look out for their best interest. Be the on-site liaison representing the Owner(s) in day-to-day communications with the general contractor (GC), subs, suppliers and other service people working on the job. Monitor job construction progress. Monitor safety conditions, and report issues to the GC, who has prime responsibility for all job safety matters. Appraise Owner(s) if unsafe working conditions exist and persist, and of potential liability concerns. Monitor, and participate in, the construction QA/QC program. Verify that the QA/QC requirements of the contract are being met. Promote communications between the construction team (GC and subs) and designer team (EOR & subs). \#LI-TM1 **Key Responsibilities** + Participate in Pre-Construction Conference (normally chaired by the EOR's PM) + Prepare project communications plan + Set guidelines for meetings and written communications + Plan for various approvals and documentation. *example provided + Organize and conduct regular job progress status meetings + Prepare and distribute agendas and conference notes. "example provided + Participate with GC personnel in QA/QC activities + Review, certify and file the field testing reports. + Water pipe pressure testing (mostly DIP, SS and PVC) + Hydrostatic testing of tanks and water containing concrete structures + Gas pipe pressure testing + Low-pressure testing of gravity piping + Concrete pre-pour documentation + Review test reports of 3rd party testing lab for spec compliance + Monitor 3rd party testing to assure correct number and types of tests are being conducted + Take and file daily photos of construction activity and progress. Document conditions which will not be viewable later (example - underground piping) + Review status of Building Permits (permits are generally a GC responsibility) + Assure that all Building Permits required are obtained + Make sure all Building Department inspections are happening + Verify permit close-out, and that Certificates of Occupancy are obtained, where applicable + Review and certify GC Pay Applications. *example provided + Review earned value (% complete) for all SOV line items + Make sure the work complete claimed is accurate + Resolve discrepancies with the GC + Verify materials/equipment and associated documentation for any stored materials claims + Verify that all other deliverables have been received and are complete and correct + Perform final check of math associated with the pay application + Sign and certify the final pay application + Review and certify Change Orders (COs) and Potential Change Orders (PCOs) + Evaluate validity of PCO/CO request. (Is there a valid need for a change, and does the proposed change meet the need? Is the proposed change the best and most cost-effective way to meet the need?) + Review PCO and costing backup for completeness and accuracy + Perform a "reasonableness review". Typically, a separate budgetary estimate to make sure the PCO cost is fair and reasonable + When all issues are resolved with the GC, review the PCO with the Owner(s) + When the Owner(s) are in concurrence with the PCO, execute a formal CO. Usually, a CO will include more than one PCOs but not always + Assist in processing and expediting Requests for Information (RFls). EOR has prime responsibility for review and approval + Review status on turn-around of RFls and Submittals from EOR to GC, and vice versa. Normally done in conjunction with the Weekly meetings + Note and document construction issues + Coordinate with GC, Owner(s) and EOR on solutions. Sometimes resulting in PCO/CO **Management Responsibilities** **Preferred Qualifications** + Associate's degree in a construction-related discipline or craft apprenticeship preferred + At least 5-10 years field experience related to construction + OSHA 30-hour Training - Construction Safety and Health **Minimum Qualifications** + 5-10 years field experience. + All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Certifications** **Work Environment/Physical Demands** Physical Demands: - Lift and carry heavy items weighing up to 50 pounds. - Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. - See and hear naturally or with correction. - Full range of motion and flexibility consistent with requirements of the job duties. - Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. - Requires repetitive movement. - May require work above 5 feet in height. - Climb and maintain balance on steel framework, stairs, ladders and scaffolds. - Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions. Work Environment: - Typical construction site environment: - Requires working in cramped work spaces and getting into awkward positions. - Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. - Requires working in extremely bright or low lighting conditions - Includes exposure to sounds and noise levels that are distracting or uncomfortable. - Work around hazardous equipment. - Typical office environment. - This position is considered a safety sensitive position. **Competencies** **Salary Plan** CNS: Construction Services **Job Grade** 016 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. Black & Veatch Holding Company, its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. If you'd like more information on your EEO rights under the law, please clickand. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Nearest Major Market:** Dallas **Nearest Secondary Market:** Fort Worth **Job Segment:** Architecture, Field Engineer, Inspection, Civil Engineer, Engineer, Engineering

**Traveling Heavy Equipment & Diesel Mechanic - Construction** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 112808 **Opportunity Type :** Staff **Relocation eligible :** No **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Job Summary** By joining our BV Construction group, you will have the ability to develop and enhance your skills in an on-site, hands-on environment. We are committed to providing our construction professionals with expert training, career development, and career advancement to allow for continuous professional development. Our management is committed to the latest advances in technology, above class support and sustainability to bring our clients the best service in safety, quality, and final product. Functions in our group include safety, project field management, construction management, quality control, start up and decommissioning and field engineering. \#LI-KC1 #mechanic #construction Assure that all construction equipment works efficiently and safely. Diagnose, adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment, such as cranes, bulldozers, forklifts, graders, and conveyors, used in construction. This is a field-based role and requires travel. **Key Responsibilities** + Use appropriate hand (i.e. screwdriver, drill) and power tools (i.e. air drill, impact wrench) to repair, replace or perform maintenance on equipment. + Receive equipment, document the condition, schedule maintenance, and keep equipment service records. + Operate and inspect machines or heavy equipment to diagnose defects. + Clean, lubricate, and perform other routine maintenance work on equipment and vehicles, and assure the efficient, clean and safe fueling and oiling of equipment. + Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices. + Examine parts for damage or excessive wear, using micrometers and gauges. + Adjust and maintain industrial machinery, using control and regulating devices. + Repair and replace damaged or worn parts, and fabricate needed parts or items from sheet metal. + Safely dismantle and reassemble heavy equipment using hoists and hand tools. + Clean parts by spraying them with grease solvent or immersing them in tanks of solvent. + Weld or solder broken parts and structural members, using electric or gas welders and soldering tools. + Repair, rewire, and troubleshoot electrical systems. + Research, order, and maintain parts inventory for services and repairs. + Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications. + Read and understand operating manuals, blueprints, and technical drawings. + Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment. + As needed, assist equipment operators in completing daily equipment inspections prior to each use; assure safety policies concerning equipment operation. + Assure that equipment leaving the job or warehouse is Job‐ready for the next assignment. + May act as a lead and direct other professionals. + May supervise work of others. + May provide supervision, training development, and performance management of others. + Identify and assess improvement opportunities and participate in continuous improvement efforts. May support, encourage and facilitate others to engage in continuous improvement activities. + Participate in and/or lead all safety related processes and programs as requested. Engage with your work team to ensure we achieve zero injuries. Understand that no job is so important that your safety and that of your crew will be compromised. Watch for hazards and report any concerns to your supervisor or safety professional. If needed, use your stop work authority until the issue is resolved. + Report all accidents and near misses to supervisor; participate in investigation process as needed. + Participate in and/or lead all pre‐job work planning and safety discussions. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate and/or mitigate hazards. + Understand and respond appropriately to all safety hazards and warning devices (i.e. back‐up alarms, smell of smoke, different colored warning tags, warning sirens). + Understand, support, and follow lockout tag out procedures. Attend site specific training and assure you follow all procedures as out lined in training. + Follow established safety rules and regulations and maintain a safe and clean work environment. + Use effective verbal and written communication skills. Add, subtract, multiply and divide whole numbers and fractions rapidly and accurately. + Related duties as assigned. **Management Responsibilities** Acts in capacity of a "lead person." Does not have management responsibility for the people to whom they provide work direction. **Preferred Qualifications** Preferred high school graduate with some college experience. Preferred Skills + Proficient Attention to Detail + Construction equipment experience + Proficient Communication - Written and Oral + Strong Data Entry + Proficient Mathematics + Proficient Organizing Data + Proficient Problem Solving + Forklift certified + Mechanical skills **Minimum Qualifications** + At least 7 years of experience working as a Mechanic that is considered an A level Technician with a strong working knowledge of mechanics. + At least 2 years experience working as a manager or supervisor. + Must have working knowledge of industrial construction equipment, machines and tools, including their designs, uses, repair, and maintenance. + Unristristriced drivers license and clean MVR. + Must have all necessary tools. + Must be at least 18 years of age. + Position will require the possession of or obtaining a Class A CDL (within 6 months of hire). + All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Work Environment/Physical Demands** Work Environment + Travel may be required. + Typically, a mixture of office, warehouse, laydown yard, and construction project site environment. + Requires working in cramped work spaces and getting into awkward positions. + Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. + Requires working in extremely bright or low lighting conditions + Includes exposure to sounds and noise levels that are distracting or uncomfortable. + Work around hazardous equipment. + Requires exposure to high places. Physical Demands + Lift and carry heavy items weighing up to 50 pounds. + Stand, Kneel, Bend, Stoop, move in and around confined and cluttered places, and uneven areas, see and hear naturally or with correction. + Full range of motion and flexibility consistent with requirements of the job duties. + Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. + Requires repetitive movement. + Climb and maintain balance on steel framework, stairs, ladders and scaffolds. + Work up to a 12-hour shift, doing hard physical labor in varying temperature extremes and other outside conditions. **Competencies** Collaborates Communicates effectively Customer focus Decision quality Drives results Manages ambiguity Situational adaptability **Salary Plan** GEN: General Services **Job Grade** 014 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Job Segment:** Construction, Hydraulics, Field Engineer, Engineer, Electrical, Engineering

The Power Market Consultant will utilize knowledge in the electric utilities power generation and transmission industry to perform tasks for client project portfolio generation and transmission planning decisions. The consultant will perform a broad range of studies and other consulting services to help clients make decisions backed by business and engineering analysis. This role will contribute to the execution of technical studies and work with project managers to lead the technical execution for projects. + Perform a broad range of studies and other consulting services to support electric utilities and asset developers to make decisions backed by business and engineering analysis regarding their investments and power supply requirements, such as integrated resource planning, market assessments, valuations and power supply RFP evaluations. + Perform forecasts and evaluations utilizing power supply planning software such as capacity optimization and hourly dispatch software models. + Conduct data analysis and interpretation of engineering, financial, and economic conditions and results, and subsequent technical business implications to client projects. + Analyze life-cycle costs by developing and incorporating technical assumptions regarding capital costs, operation and maintenance costs, performance estimates, and economic assumptions and forecasts. + Conduct technical and business-related risk assessments that evaluate impacts associated with rules implemented by regulatory agencies. + Develop and conducts detailed financial analysis using a variety of computer-based software. + Develop technical reports and presentations summarizing results of analysis. + Develop client presentations, engineering reviews, financial analysis, and contract administration for the design/planning of utility systems. + Assist project managers in business development activities including proposal development and client relationships. + Mentor and train other employees on technical and business aspects of projects and the industry. + Support business lines as required by clients. + Perform other duties as assigned. + Comply with all policies and standards. **Qualifications** + Bachelor Degree in Engineering, Economics, Computer Science, Data Science or similar field from an ABET accredited program and 3 years of related experience or a Master's Degree in Engineering, Economics, Computer Science, Data Science, or Business and 2 years of experience + Prior experience associated with electric utility operations, planning, or consulting is preferred. + Experience with power supply planning software, preferably EnCompass (zonal and nodal) and Capacity Expansion (or familiarity with PROMOD, Plexos, GridView, or others). + Experience and knowledge of general business and financial calculations including discounted cash flow analysis, net present value analysis, and internal rate of return evaluations. + Experience and knowledge of electric power options including generation facility types, capital costs, operating costs, typical dispatch profiles, and general power system operations. Knowledge of power supply purchase agreements regarding costs and terms. + Ability to execute various power markets / power supply planning studies. + Knowledge of electric utility systems, power generation types, power delivery with understanding of power generation portfolio planning. + Knowledge of numerous power market regions of the country and independent system operators such as: PJM, MISO, NEISO, SPP, CAISO, WECC, SERC, ERCOT, NYISO. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to work methodically and analytically in a quantitative problem-solving environment. + Demonstrated leadership skills. + Proven ability to lead, educate, and train a team of consultants and analysts in regard to power market studies. + Ability to independently solve difficult problems that require adaptation and modification of standard techniques, procedures, and criteria. + Excellent written and oral communications skills. + Demonstrated critical thinking skills. + Ability to perform under pressure and tight deadlines and to be effective in on-site work environments. + Ability to manage multiple projects concurrently, including identification of critical path items to ensure deliverable deadlines are met. + Ability to focus on the big picture to effectively and efficiently provide services that meet client needs, while also having the ability to identify and analyze details that are critical to project outcomes. + Willingness to learn new service offerings as client needs and the market requires changes to the service offerings provided by our group + Proficient in Microsoft Office Suite (Word, Excel, PPT). + Ability to travel. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Engineering **Primary Location** US-MO-Kansas City **Other Locations** US-FL-Orlando, US-AZ-Phoenix, US-TX-Austin, US-GA-Atlanta, US-TX-Houston, US-TX-Dallas **Schedule:** Full-time **Travel:** Yes, 15 % of the Time **About 1898 & Co.** 1898 & Co. is a business, technology and security solutions consultancy where experience and foresight come together to unlock lasting advancements. We innovate today to fuel our clients' future growth, catalyzing insights that drive smarter decisions, improve performance and maximize value. As part of Burns & McDonnell, we draw on more than 120 years of deep and broad experience in complex industries as we envision and enable the future for our clients. **Req ID:** 244690 **Job Hire Type** Experienced #LI-EH #E98 N/A

**Description** The Assistant Environmental Scientist will support delivery of environmental assessments, compliance management plans, and permitting tasks for various industries including transmission and distribution, power generation, chemical manufacturing, aviation, utilities, and technology. This position supports the growth of the Environmental Services Global Practice based upon Burns & McDonnell's core values of safety, client satisfaction, commitment, dedication, integrity, and overall outstanding service. Assigned tasks may include the following: + Assist in conducting environmental site inspections and preparation of site inspection reports. + Assist in proper collection of soil and water samples for laboratory analysis. + Assist in conducting Phase I Environmental Site Assessments (ESA) and preparation of Phase I ESA reports. + Assist in conducting Hazardous and Regulated Material Surveys and preparation of the associated reports. + Assist in preparation of compliance plans such as Stormwater Pollution Prevention Plans (SWPPP), Spill Prevention Control and Countermeasure (SPCC) Plans, and Waste Management Plans. + Assist in reviewing regulations and identifying permits applicable to design, construction, and operation of various projects and facilities. + Assist in preparing permit applications. + Assist in the preparation of technical reports. + Ensure compliance with company and site safety policies. + All other duties as assigned. **Qualifications** + Bachelor Degree in Environmental Science or a related natural science degree from an accredited program required. + 40 Hour HAZWOPER Certification preferred. + Prior internship or natural science field experience preferred. + Strong analytical and problem solving skills. + Ability to clearly communicate both verbal and written technical information. + Basic knowledge of environmental site assessment methods. + Basic knowledge of federal environmental regulations. + Basic knowledge of environmental compliance and compliance audits. + Basic knowledge of GPS and working in the ArcGIS desktop environment. + Must be proficient in the use of computer software (i.e., Microsoft Word, Excel, PowerPoint). + Must meet standards to qualify for and maintain the Company's vehicle driving privileges as outlined in the Company's Motor Vehicle Safety Policy. + Valid driver's license required. + Minimum of a 3.0 GPA strongly preferred. + Involvement on campus or in the community preferred. + Candidates must be legally authorized to work permanently (i.e., without time limitations, without restrictions or without need for work sponsorship) in the country where this position is located. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Environmental **Primary Location** US-TX-Austin **Other Locations** US-TX-Fort Worth, US-TX-Houston **Schedule:** Full-time **Travel:** Yes, 50 % of the Time **Req ID:** 254816 **Job Hire Type** New Grad #LI-JF #ENS

Dashiell is a leading national provider of technical services to the electric utility, power generation, industrial, renewable and energy industries. These services include planning and systems studies, design and engineering, maintenance and testing, program management, construction, and turnkey EPC projects. Built on 50 years of experience handling large scale complex projects; Dashiell is unique in that we are a turnkey Engineering, Construction, and Testing company that specializes in medium and high voltage electrical infrastructure. More information about Dashiell can be found at ***************** Job Title: CAD Technician I Job Location: 11501 Burnet Rd BLDG 906 STE 200, Austin, TX 78758 Primary Function: Perform drafting duties using basic drafting skills and techniques for medium/high voltage substation or transmission line drawings. Assignments are closely supervised and are designed to develop the employee's understanding of drafting techniques, corporate/client standards, and procedures. CAD Technician's will either be dedicated to Electrical, Transmission, or Civil/Structural design projects. Duties & Responsibilities Employee may be called upon to perform any or all of the following functions: Revise CADD drawings per engineering markups Perform engineering support tasks under direct supervision (e.g. transmittals) Learn and apply the corporate/client standard of drafting and engineering practices Learn and properly use document management systems Take personal responsibility for the quality and accuracy of his/her work Bring potential project-related problems and possible solutions to the attention of the responsible party Travel out of town for short periods of time as required by projects and assignments Perform other duties as assigned Minimum Qualifications / Experience Associate degree in drafting & design is required. A certificate in CAD drafting & design with relevant work experience may be accepted in lieu of an associate degree. Possess skills in the following areas: Experience with AutoCAD 2010 and newer is required. Experience with Microstation preferred but not required 3D CADD experience preferred but not required Basic drafting including drawing scales, drawing layouts (Paperspace/Modelspace), and accurately reproducing engineering markups CADD, word processing, spreadsheet, and e-mail software College level geometry Ability to work in a team environment Ability to communicate effectively, both written and verbal, with co-workers Physical Requirements: This position requires minimal physical effort. Must be able to endure prolonged periods sitting at a desk and working on a computer for a minimum of 8 hours a day While performing the duties of this job, the employee will primarily work indoors, with occasional outdoor exposure to year around weather conditions and noise. Must be able and willing to travel overnight for trainings and/or meetings as required (10%) Working extended hours, including weekends, may be required periodically. May occasionally lift up to 25 pounds at a time. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy. Equal Employment Opportunity Dashiell is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Dashiell Corporation provides a competitive compensation and benefits package. The Company provides life insurance, accidental death & dismemberment insurance, long term disability insurance, and an employee assistance plan at no cost to the employee. Benefit offerings also include a choice of traditional PPO or one of two HDHPs, with corresponding FSA or HSA, dental, vision, supplemental life insurance, short-term disability insurance, critical illness insurance, group accident insurance, hospital indemnity insurance, a 401(k) with immediate vesting, and more! Must be at least 18 years of age and legally authorized to work in the United States on a permanent basis without visa sponsorship. No third-party recruiters, please.

The Assistant Electrical Engineer (or Energy & Utilities Analyst) will work under the supervision of a consultant or project manager to assist with developing solutions to technical and economic challenges encountered by our energy and utility clients. The Energy & Utilities Analyst will assist with power system studies that evaluate power plants (both fossil fuel and renewable) and delivery systems (transmission and distribution) and include but are not limited to, power supply planning, due diligence, performance and benchmarking evaluations, site assessments, investment planning, condition assessments, financial cost/benefit evaluations, and renewable development. + Analyzes, interprets, and applies engineering, financial, and economic conditions, theories, and principles to complete assigned tasks regarding technical and business implications to client projects. + Applies basic knowledge of commonly used engineering and financial concepts, practices, codes, and procedures within the consulting services industry. + Assists with analyzing life-cycle costs by developing and incorporating technical assumptions regarding capital costs, operation and maintenance costs, performance estimates, and economic assumptions and forecasts. + Assists project team with technical assessments that evaluate impacts associated with rules implemented by regulatory agencies. + Assists with designing, reviewing, and modifying drawings for project requirements that are set forth by the project managers. + Supports power system planning and operations analysis, including power flow, transient, stability, short circuit, electromagnetic transients, reliability, and economic dispatch. + Performs technical, engineering, economic, and financial studies involving planning and operations for utility projects. + Supports transmission/distribution study analysis utilizing power system software. + Supports engineering, technical, and economic assessments for both fossil and/or renewable generation. + Support technical and business-related risk assessments. + Support developing and performing detailed financial analysis using a variety of computer-based software. + Support developing technical reports and presentations summarizing results of analysis. + Support preparation of client presentations, engineering reviews, financial analysis, and contract administration for the design/planning of utility systems. + Support Utility Consulting business lines as required by clients. + Performs other duties as assigned. + Complies with all policies and standards. **Qualifications** + Bachelor Degree in Electrical Engineering, Finance, Accounting, or related degree from an accredited program required. + Bachelor Degree in Electrical Engineering or related degree from an ABET accredited program strongly preferred. + Prior internship and/or related consulting experience preferred. + Excellent written and verbal communication skills. + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Proficient computer skills (e.g. Microsoft Office Suite). + Strong attention to detail, facilitation, team building, collaboration, organization and problem solving skills. + Demonstrated leadership skills. + Minimum of a 3.0 GPA strongly preferred. + Involvement on campus or in the community preferred. + Candidates must be legally authorized to work permanently (i.e., without time limitations, without restrictions or without need for work sponsorship) in the country where this position is located. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans **Job** Electrical Engineering **Primary Location** US-TX-Houston **Other Locations** US-TX-Austin, US-TX-Dallas **Schedule:** Full-time **Travel:** No **About 1898 & Co.** 1898 & Co. is a business, technology and security solutions consultancy where experience and foresight come together to unlock lasting advancements. We innovate today to fuel our clients' future growth, catalyzing insights that drive smarter decisions, improve performance and maximize value. As part of Burns & McDonnell, we draw on more than 120 years of deep and broad experience in complex industries as we envision and enable the future for our clients. **Req ID:** 252347 **Job Hire Type** New Grad #LI-MC #E98 N/A

**Civil Superintendent - Simple Cycle - Texas** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 112213 **Opportunity Type :** Staff **Relocation eligible :** No **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Job Summary** By joining our BV Construction group, you will have the ability to develop and enhance your skills in an on-site, hands-on environment. We are committed to providing our construction professionals with expert training, career development, and career advancement to allow for continuous professional development. Our management is committed to the latest advances in technology, above class support and sustainability to bring our clients the best service in safety, quality, and final product. Functions in our group include safety, project field management, construction management, quality control, start up and decommissioning and field engineering. This is a field assignment and requires travel. \#LI-KC1 #civilsuperintendent #combinecycle #construction Interfacing with and monitoring direct hire supervision and field engineering, direct hire craft productivity and performance. Ensures adherence by all discipline craft to safety, quality, schedule and performance expectations as defined by Black and Veatch. Provides craft supervisors with information and technical direction required to complete project safely, timely and in a quality manner. Ensures schedule and project expectations are clearly defined to craft supervision. Ensures schedule requirements are communicated to all levels of craft discipline. Coordinates interpretation of technical requirements. Provides technical data and information as required to direct hire workforce. Ensures compliance by workforce to all standards, procedures and contractual commitments within the bounds of all applicable policies. **Key Responsibilities** + Monitors, verifies and reports on construction activities for compliance with the CPM schedule; tracks and reports on completion of project schedule activities and commodity installation. + Assists craft in resolving problems and reports on issues related to drawings and information, schedule, quality, quantity tracking, cost reporting, and safety. + Monitors discipline construction productivity, progress, and cost, and reports to Construction Manager and Field Project Controls Manager. + Takes necessary actions to maintain targets. + Conducts foreman meetings to review/assist in daily, weekly, and monthly planning. + Develops and monitors 3 Week Look Ahead Schedule for assigned work scope. + Develops corrective plan to ensure progress and productivity targets are met. + Verifies that all material, manpower and resources needed to support the 3 Week Look Ahead Schedule are available and on site. + Develops, monitors, and reports on completion of craft/subcontractor punch list activities. + Maintains a daily log for site records. + Reviews all craft timesheets, installed quantity reports, and progress payment requests. + Monitors supplier Technical Service Representative (supplier) daily log and reviews/approves their timesheets. + Communicates and coordinates assigned craft daily and weekly work plans with other discipline Superintendents/Facilitators and Construction Manager. + Assists Field Subcontract Administrator in the preparation of all extra work authorization requests (RFMPs/WAs). + Assists the Construction Engineer in the compilation or answering of Contractor Information Requests. + Administers the execution of work packages and equipment installation. + Develops and distributes a Job Hazard Analysis for major erection packages within scope. + Identifies potential back charges and out of scope issues and reports to Construction Manager. + Supports commercial recovery process. + Provides supervision, training, development, and performance management to direct reports. + Adheres to safety and quality standards as applicable to duties and accountabilities. + Acts in capacity of a "supervisor ". Does not have management responsibility for the people to whom they provide work direction. + Supervises general foreman, foreman, and minor subcontractor supervision. **Preferred Qualifications** High School Diploma or equivalent preferred. Engineering or Construction Management degree preferred. Preferred Skills: + Knowledge of Company construction guides and manuals + Civil construction experience + Simple Cycle construction experience + Self-Perform/Direct Hire construction experience + Construction Safety awareness and comprehension + Conflict Management Skills + Multi-tasking Ability (prioritize, organize, schedule work) + Problem-solving Skills (identify, analyze, research, evaluate, resolve) + Project Management Skills + Supervisory Skills + Communication Skills + Constructability Knowledge in Discipline + Constructability Knowledge in other disciplines + Risk Assessment/Management + Cost Code Labor Productivity Systems + Time Reporting Policies and Procedures + Construction Guides and Standards + Computer Skills **Minimum Qualifications** 5+ years experience of construction field leadership on equivalent projects. Valid Driver's License. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. **Certifications** OSHA 10 certification. **Work Environment/Physical Demands** Physical Demands: - Lift and carry heavy items weighing up to 50 pounds. - Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. - See and hear naturally or with correction. - Full range of motion and flexibility consistent with requirements of the job duties. - Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure. - Requires repetitive movement. - May require work above 5 feet in height. - Climb and maintain balance on steel framework, stairs, ladders and scaffolds. - Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions. Work Environment: - Typical construction site environment: - Requires working in cramped work spaces and getting into awkward positions. - Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc. - Requires working in extremely bright or low lighting conditions - Includes exposure to sounds and noise levels that are distracting or uncomfortable. - Work around hazardous equipment. - Typical office environment. - This position is considered a safety sensitive position. **Salary Plan** CNS: Construction Services **Job Grade** 016 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Nearest Major Market:** Olathe **Nearest Secondary Market:** Kansas City **Job Segment:** Construction, Construction Engineer, Field Engineer, Engineer, Civil Engineer, Engineering

**Associate Water Resources Engineer** Company: Black & Veatch Family of Companies **Together, we own our company, our future, and our shared success.** As an employee-owned company, our people _are_ Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. **Company :** Black & Veatch Corporation **Req Id :** 111910 **Opportunity Type :** Staff **Relocation eligible :** Yes **Full time/Part time :** Full-Time **Project Only Hire :** No **Visa Sponsorship Available:** No **Why Black and Veatch** At Black & Veatch, you have the opportunity to contribute your talent and perspective to tackling humanity's greatest challenges in a flexible environment that empowers you to grow and explore new possibilities. We offer competitive compensation, a 401K match, and benefits starting from day one. Our hybrid work environment allows you to balance your professional and personal life seamlessly. At Black & Veatch, you own your career with purpose and meaning, empowered to grow and explore new possibilities at every step of your journey. Bring your innovative ideas, knowing you are safe to be yourself, voice your concerns or questions, and utilize your diverse talents and perspectives. \#LI-KB2 **The Opportunity** Black & Veatch has an exciting opportunity for an early-career **Water Resource Planning position** focused on focused on stormwater planning and design, asset management, water quality and integrated planning. Within our U.S. planning, water resources, and stormwater business, we have seen consistent growth driven by our clients' needs to address challenges stemming from stormwater management, flood control, condition assessment services for conveyance/transmission assets, aging infrastructure, and supply planning to support population growth and resilience. This represents a strategic business initiative for Black & Veatch, and the Water Resource Planning position is structured to help the company grow its market share by providing world-class planning, water resource, and asset management services. **Key Responsibilities** + Support hydrologic and hydraulic planning, modeling, and design of stormwater and wet weather improvements, including open channels, storm sewer systems, stormwater detention/retention facilities, dams, levees, and reservoirs. + Support water supply planning that provides long-term resilient supplies and mitigates climate change, regulatory uncertainty, aging infrastructure, and population growth/demand changes. + Support planning and design of green infrastructure, low impact development, and sustainable watershed measures, including structural BMPs. + Support erosion and sediment control planning and design, including SWPPP development. + Interface with innovative stormwater, water quality, and planning partners to leverage new technologies and approaches for the benefit of our clients. **Preferred Qualifications** + 2-5 years of water resources planning, stormwater design, dam safety, and/or condition assessment experience + Experience developing and executing water resource planning and design projects is preferred + Proficiency with working and collaborating in virtual environments (MS Teams, WebEx, Zoom) + Proficiency with some or all of the following software applications and models + Microsoft Office (Word, Excel, Powerpoint, Project) + ESRI ArcGIS or QGIS + AutoCAD + HEC-RAS + HEC-HMS + EPA/XP-SWMM + InfoWorks + StormWise (formerly ICPR) + Capable of conducting site reconnaissance and remote investigations + Experience with regulatory requirements and procedures (FEMA, USACE, and EPA) preferred + Support client-facing and business development efforts **Minimum Qualifications** + Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. + Minimum of 1 year related work experience. **Certifications** + Engineer-in-Training Certificate (or ability to acquire the same) + CFM (preferred) **Work Environment/Physical Demands** Hybrid or flexible work options may be offered after the first 90 days of employment based upon manager discretion, job performance and work assignments. Majority of work is office based. Some site visits will be required which may necessitate navigating unpaved or natural terrain while carrying equipment. **Salary Plan** ENG: Engineering **Job Grade** 015 Black & Veatch endeavors to makeaccessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click. **Notice to External Search Firms** : Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs. **Nearest Major Market:** Houston **Job Segment:** Construction, Drafting, AutoCAD, CAD, Architecture, Engineering

About Us At 1898 & Co., part of Burns & McDonnell, we partner with clients across industries to redefine how capital projects are planned, executed, and delivered. Our Digital Project Management Office (PMO) solutions combine deep technical expertise with cutting-edge technology to help organizations achieve efficiency, transparency, and smarter outcomes. With decades of consulting experience and a people-first culture, we bring innovation and impact to every engagement. The Role We are looking for a Senior Solution Consultant in our Digital PMO practice who is passionate about helping clients transform their capital project and portfolio management systems. In this role, you'll lead engagements that design, configure, and optimize digital PMO solutions, mentoring teams and helping shape the future of project delivery. You'll be a trusted advisor to clients, leveraging your expertise to solve complex challenges and drive measurable impact. What You'll Do + Lead consulting engagements focused on capital project and portfolio management technology. + Develop and design technical solutions, including cost estimates, project approaches, and schedules. + Provide technical leadership for project and portfolio management system implementations. + Ensure quality assurance and quality control for all deliverables, aligning with client needs and project standards. + Guide the development of improved business processes within project and portfolio management systems. + Maintain and grow client relationships through project delivery and business development support. + Bring domain expertise to cross-functional teams and drive innovation initiatives in project management technology. + Provide leadership and guidance to junior staff, helping develop the next generation of talent. Preferred Experience + Experience working with utilities, infrastructure, or large capital project environments. + Deep knowledge of project management methodologies, portfolio governance, and capital project delivery practices. + Skilled in technology readiness assessments, roadmapping, product selection, assessment, implementation planning and support, and other advisory services that precede PM technology implementations. + Experience supporting business development efforts through contributions to proposals, presentations, and client engagement activities. + Experience with data visualization and reporting tools (e.g., Power BI, Tableau). + Strong facilitation skills with the ability to lead client workshops and executive-level discussions. + Excellent communication, presentation, and stakeholder management skills. + Proven track record of delivering successful digital transformation or enterprise technology projects. + Highly motivated to contribute to industry thought leadership, including presenting at industry and partner conferences, publishing insights, and representing the firm in professional forums. Why Join Us At 1898 & Co., you'll be part of a dynamic team that is reshaping how organizations approach capital project management. We offer opportunities to work with top-tier clients, develop cutting-edge solutions, and grow your career in a collaborative and innovative environment. As part of Burns & McDonnell, you'll benefit from professional development programs, career advancement opportunities, and a culture that values curiosity, collaboration, and impact. Qualifications + Bachelor Degree in Business, Computer Science, Engineering, or related field from an accredited program and 7 years of relevant experience Required + Excellent project and portfolio management system skills. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to work methodically and analytically in a quantitative problem-solving environment. + Ability to independently solve difficult problems that require adaptation and modification of standard techniques, procedures, and criteria. + Excellent written and oral communication skills. + Demonstrated critical thinking skills. + Ability to perform under pressure and tight deadlines and to be effective in on-site work environments. + Ability to manage multiple projects concurrently, including identification of critical path items to ensure deliverable deadlines are met. + Ability to focus on the big picture to effectively and efficiently provide services that meet client needs, while also having the ability to identify and analyze details that are critical to project outcomes. + Proficient in Microsoft Office Suite (Word, Excel, PPT). This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans Job Consulting Primary Location US-TX-Austin Schedule: Full-time Travel: Yes, 50 % of the Time About 1898 & Co. 1898 & Co. is a business, technology and security solutions consultancy where experience and foresight come together to unlock lasting advancements. We innovate today to fuel our clients' future growth, catalyzing insights that drive smarter decisions, improve performance and maximize value. As part of Burns & McDonnell, we draw on more than 120 years of deep and broad experience in complex industries as we envision and enable the future for our clients. Req ID: 253103 Job Hire Type Experienced #LI-MG #E98 N/A

The Senior Architect - Process will lead in the development of pharmaceutical and life science projects teams to create world-class designs for Life Science Clients. The Senior Architect - Process will lead the project team throughout the design and construction process and integrate process systems into the resulting architectural concepts and plans according to budget constraints, environmental factors, or client needs. + Lead design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by clients and project colleagues. + Develop, modify, and review production drawings for Life Science facilities. + Participate in the development of project schedule, scope, budget staffing planning, and construction planning. Responsible for effective management of change orders. + Applies knowledge and understanding of FDA, cGMP, and other concepts, practices, codes, and procedures within the industry. + Demonstrated ability to develop designs in new or renovated facilities which integrate equipment, processes, and people. + Experienced in developing Process Architect deliverables across the Life Sciences industry including but not limited to Animal Health, Biotechnology, and Pharmaceutical facilities. + Demonstrated ability to identify operational efficiency and optimization to reduce facility footprint. + Applies expert knowledge of commonly used architectural concepts, practices, codes, and procedures within the architectural industry. Compiles studies and reports. Writes specifications. + Applies knowledge and experience to complex projects, and find's/develops non-standard design solutions. + Quality review production drawings for a variety of projects and project-related data as required by the project managers to verify design compliance with project, client, and industry standards, including constructability. + Quality review the construction administration including coordination with field personnel to resolve design-related installation issues, calculations, field inspections, and testing of materials. + Leads field inspections, installation, measurements, or calculations for public and private clients. + Prepare and present technical reports for clients and industry publications. + Build effective relationships with existing clients, customers, and contractors and develop new business opportunities. Responsible for ensuring customer satisfaction goals and expectations are met. + Participate in sales and marketing efforts and identify, lead, and manage key pursuits. + Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance. + Prepare, present, and manage project budgets and cost estimates. Report project performance. + Provide leadership, guidance, and instruction to the architectural practice. Mentor and guide less experienced engineers. + Responsible for QA/QC process adherence. + Responsible for effective communication with other architectural teams. + Responsible for compliance with company and site safety policies. + All other duties as assigned. Qualifications + Bachelor of Architecture degree from an accredited program is required. + 8 years of architectural experience, consulting preferred. + Registered Architect preferred. + Expert knowledge in standard architectural techniques and procedures. + Excellent written and verbal communication skills. + Expert computer skills (e.g. Microsoft Office Suite). + Expert computer skills (e.g. BIM (Revit), Adobe Suites, and 3D rendering programs). + Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills. + Expert attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills. + Experience with leading the design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment. + Demonstrated critical thinking skills, and ability to work methodically and analytically in a quantitative problem-solving environment. + Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills. + Ability to perform quality reviews for detailed architectural documents and specifications. + Ability to travel. Compensation $115,000.00-190,000.00 Yearly The expected compensation range for this position is displayed in compliance with all local/state regulations. The expected compensation range for this position is based on a number of factors, including but not limited to: individual education, qualifications, prior work experience and work location. The total annual compensation package will consist of a base salary and eligibility to participate in our discretionary year-end incentive bonus program. Benefits Our extensive benefits package takes care of you so that you can focus on doing great work. From insurance and disability to time off and wellness programs, we provide the tools to meet your needs. As part of being 100% employee-owned, eligible employees participate in our Employee Stock Ownership Plan (ESOP) in addition to our 401(k) retirement program. For more information, please visit the Benefits & Wellness page. This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans Job Architecture Primary Location US-MO-Kansas City Other Locations US-OK-Oklahoma City, US-KS-Wichita, US-ME-Portland, US-AZ-Tucson, US-FL-Orlando, US-TX-Austin, US-NE-Omaha, US-OH-Akron, US-GA-Atlanta, US-MA-Newton, US-AZ-Phoenix, US-TX-Fort Worth, US-TN-Chattanooga, US-VA-Norfolk, US-NC-Charlotte, US-TN-Nashville, US-AR-Springdale, US-VA-Richmond, US-NC-Raleigh, US-FL-Miami, US-AL-Huntsville, US-UT-Salt Lake City, US-MI-Detroit, US-OH-Columbus, US-SC-Greenville, US-MO-Saint Louis, US-NJ-Morristown, US-SC-Aiken, US-TX-Houston, US-VA-Roanoke, US-KY-Lexington, US-TX-Dallas, US-SD-Sioux Falls, US-PA-Conshohocken Schedule: Full-time Travel: Yes, 15 % of the Time Req ID: 242913 Job Hire Type Experienced #LI-KJ #GFS

Dashiell is a leading national provider of technical services to the electric utility, power generation, industrial, renewable and energy industries. These services include planning and systems studies, design and engineering, maintenance and testing, program management, construction, and turnkey EPC projects. Built on 50 years of experience handling large scale complex projects; Dashiell is unique in that we are a turnkey Engineering, Construction, and Testing company that specializes in medium and high voltage electrical infrastructure. More information about Dashiell can be found at ***************** Job Title: Project Manager Job Location: 11501 Burnet Rd BLDG 906 STE 200 Primary Function: Responsible for the development, planning, execution, and monitoring of projects focused on the turnkey construction of high voltage electrical substations, transmission lines and distribution lines. Duties & Responsibilities Employee may be called upon to perform any or all of the following functions: Accountable for the cost, schedule, safety, quality and completion of construction projects Coordinate work with Purchasing to ensure that requested material is expedited and received as needed for the construction of a project. Manage multiple project teams. Responsible for the preparation and maintenance of cash flows, monthly billing, preparing and obtaining change orders for assigned projects. Responsible for the preparation and maintenance of monthly construction progress reports, re-projections, files, etc, required for the construction of a project. Resolve inter-group conflicts, project conflicts and delays as required to meet project construction goals. Travel out of town for short periods of time as required by projects and assignments. Other duties as required. Minimum Qualifications / Experience Bachelor's degree in Electrical, Civil Engineering, or equivalent is required. Professional Registration is preferred. 10 years experience in the design, construction, or operations of substations and/or transmission lines is required. 10 years of experience in the supervision/management of budgets and work groups is strongly preferred. Possess skills in the following areas: Demonstrated understanding of substations, substation control and transmission systems. Understand financial aspects of project control. Interpersonal skills, technical knowledge, organizational ability and leadership talent. Experience with MS Office including Outlook, Excel, and Word. Working in a team environment. Communicating effectively with co-workers. Willing to travel to project sites as necessary. Physical Requirements: This position requires minimal physical effort. Must be able to endure prolonged periods sitting at a desk and working on a computer for a minimum of 8 hours a day While performing the duties of this job, the employee will primarily work indoors, with occasional outdoor exposure to year around weather conditions and noise. Must be able and willing to travel overnight for trainings and/or meetings as required (10%) Working extended hours, including weekends, may be required periodically. May occasionally lift up to 25 pounds at a time. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy. Equal Employment Opportunity Dashiell is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Dashiell Corporation provides a competitive compensation and benefits package. The Company provides life insurance, accidental death & dismemberment insurance, long term disability insurance, and an employee assistance plan at no cost to the employee. Benefit offerings also include a choice of traditional PPO or one of two HDHPs, with corresponding FSA or HSA, dental, vision, supplemental life insurance, short-term disability insurance, critical illness insurance, group accident insurance, hospital indemnity insurance, a 401(k) with immediate vesting, and more! Must be at least 18 years of age and legally authorized to work in the United States on a permanent basis without visa sponsorship. No third-party recruiters, please.

Dashiell is a leading national provider of technical services to the electric utility, power generation, industrial, renewable and energy industries. These services include planning and systems studies, design and engineering, maintenance and testing, program management, construction, and turnkey EPC projects. Built on 50 years of experience handling large scale complex projects; Dashiell is unique in that we are a turnkey Engineering, Construction, and Testing company that specializes in medium and high voltage electrical infrastructure. More information about Dashiell can be found at ***************** Job Title: Structural Designer Job Location: 11501 Burnet Rd BLDG 906 STE 200, Austin, TX 78758 Primary Function: Perform routine design assignments, which require knowledge and skill in structural drafting of steel structures and concrete foundations. Successful candidates may be placed in a Designer I, II or III titles depending on skill and experience level. Duties & Responsibilities Employee may be called upon to perform any or all of the following functions: Produce new drawings from examples of previous projects and/or standards Oversee project-specific activities of drafters and more junior designers Research information in catalogues, specifications, corporate standards, or other reference material Calculate structure heights and weights, concrete volumes, equipment fit-up, or other basic tasks Develop design documents, drawings, and bills of materials Learn and use task-specific software Learn and properly use the document management system Take personal responsibility for the quality and accuracy of his/her work Bring potential project-related problems and possible solutions to the attention of the responsible party Travel out of town for short periods of time as required by projects and assignments; travel will be minimal Other duties as required Minimum Qualifications / Experience Certificate in Drafting and/or Design is required; equivalent experience with AutoCAD may be considered in lieu of certificate. Associate's degree in Drafting/Design is preferred. A minimum of 2 years of civil/structural design is required; substation design experience is preferred. Possess skills in the following areas: Experience with AutoCAD 2010 or newer is required. Experience with Microstation V8 & V8i is preferred Experience in structural drafting of steel structures and concrete foundations Knowledge of the types of drawings required for foundation and steel construction Knowledge of the major components of a substation is preferred Basic knowledge of civil / structural codes and standards (AISC and ACI) Mathematics, including algebra and basic trigonometry Basic oral and written communications Word processing, spread sheet, and e-mail software Working in a team environment Communicating effectively with co-workers Physical Requirements: This position requires minimal physical effort. Must be able to endure prolonged periods sitting at a desk and working on a computer for a minimum of 8 hours a day While performing the duties of this job, the employee will primarily work indoors, with occasional outdoor exposure to year around weather conditions and noise. Must be able and willing to travel overnight for trainings and/or meetings as required (10%) Working extended hours, including weekends, may be required periodically. May occasionally lift up to 25 pounds at a time. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy. Equal Employment Opportunity Dashiell is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Dashiell Corporation provides a competitive compensation and benefits package. The Company provides life insurance, accidental death & dismemberment insurance, long term disability insurance, and an employee assistance plan at no cost to the employee. Benefit offerings also include a choice of traditional PPO or one of two HDHPs, with corresponding FSA or HSA, dental, vision, supplemental life insurance, short-term disability insurance, critical illness insurance, group accident insurance, hospital indemnity insurance, a 401(k) with immediate vesting, and more! Must be at least 18 years of age and legally authorized to work in the United States on a permanent basis without visa sponsorship. No third-party recruiters, please.

Together, we own our company, our future, and our shared success. As an employee-owned company, our people are Black & Veatch. We put them at the center of everything we do and empower them to grow, explore new possibilities and use their diverse talents and perspectives to solve humanity's biggest challenges in an ever-evolving world. With over 100 years of innovation in sustainable infrastructure and our expertise in engineering, procurement, consulting and construction, together we are building a world of difference. Company : Black & Veatch Corporation Req Id : 112032 Opportunity Type : Staff Relocation eligible : Yes Full time/Part time : Full-Time Project Only Hire : No Visa Sponsorship Available: No Why Black and Veatch Black & Veatch allows you to lend your talent and perspective to humanity's biggest challenges in a flexible environment where you are empowered to grow and explore new possibilities. We offer competitive compensation; 401K match and benefits that start day 1. Our hybrid environment allows you to balance your work and personal life. At Black & Veatch, you own your career with purpose and meaning. You are empowered to grow and explore new possibilities at every step of your career journey. Bring your big ideas knowing you are safe to be who you are and speak up with concerns or questions and put your diverse talents and perspectives to use. #LI-MK1 The Opportunity As the Project Engineering Manager for Water & Wastewater, you will manage execution of the engineering component of multiple traditional, design-build, design-bid-build, and collaborative delivery projects including advanced treatment facilities, underground conveyance, and carbon neutral solutions. In this role, you will have the opportunity to: * Lead a multi-discipline team of engineers and technicians on high profile municipal projects. * Supervise and mentor engineering staff, identifying developmental growth opportunities. * Manage budgets, scheduling, and correspondence with clients and project management in support of a project. The Team Black & Veatch's Governments & Community business works to provide innovative solutions and integrated planning, design, and construction support for mission-critical facilities, as well as threat reduction and environmental services worldwide. The Project Engineering Management team is a top-ranked team by ENR for Water Design Firms in Water Supply, Sewer Waste, and other water-related rankings. They partner with clients to align people, processes, technologies, and data analytics to modernize water infrastructure, optimize asset use, meet performance goals, reduce costs, and mitigate risk. Check out a day in the life of a Project Engineering Manager and one of our recent projects | Project Story: Tomahawk Wastewater Treatment Facility Expansion - YouTube Key Responsibilities Project Execution: * Prepare complex engineering deliverables for large or multiple projects * Assist in the research to develop equipment and material recommendations * Prepare complex engineering calculations following standard methods and principles * Develop and manage project budgets, schedules, and quality requirements across multiple disciplines * Lead production teams, coordinate multiple discipline activities, and serve as the responsible charge for a project Client Interface: * Identify key client interests and drivers for moderately complex projects * Communicate client concerns to project team members and develop solutions * Provide support for business development or pursuit activities * Manage project changes directly with the client under Project Manager supervision Technical expertise: * Lead large multi-discipline teams to meet project deliverables * Provide input to technical leadership for complex water and wastewater treatment projects * Drive solutions to achieve project goals Management Responsibilities: * Reviews lower-level engineering work or assignments * Mentoring, and performance management of assigned personnel Preferred Qualifications * PE license. * Previous engineering consulting experience. * Experience executing multi-discipline WTP and WWTP upgrades and expansion projects. Minimum Qualifications * Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing. * Minimum of 5 years related work experience * All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. Work Environment/Physical Demands * Hybrid or flexible work options may be offered after the first 90 days of employment based upon manager discretion, job performance and work assignments * Sitting/standing/computer usage for extended periods of time * Ability to utilize video/audio conferencing software tools for internal/external communication * Travel to client sites Salary Plan ENG: Engineering Job Grade 016 Black & Veatch endeavors to make ****************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process because of a disability, please contact the Employee Relations Department at *************** or via our accommodations request form. This contact information is for disability accommodation requests only; you may not use this contact information to inquire about the status of applications. General inquiries about the status of applications will not be returned. Black & Veatch is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. Our comprehensive benefits portfolio is a key component of this commitment and offers an array of health care benefits including but not limited to medical, dental and vision insurances along with disability and a robust wellness program. To support a healthy work-life balance, we offer flexible work schedules, paid vacation and holiday time, sick time, and dependent sick time. A variety of additional benefits are available to our professionals, including a company-matched 401k plan, adoption reimbursement, tuition reimbursement, vendor discounts, an employment referral program, AD&D insurance, pre-taxed accounts, voluntary legal plan and the B&V Credit Union. Professionals may also be eligible for a performance-based bonus program. We are proud to be a 100 percent ESOP-owned company. As employee-owners, our professionals are empowered to drive not only their personal growth, but the company's long-term achievements - and they share in the financial rewards of the success through stock ownership. By valuing diverse voices and perspectives, we cultivate an authentically inclusive environment for professionals and are able to provide innovative and effective solutions for clients. BVH, Inc., its subsidiaries and its affiliated companies, complies with all Equal Employment Opportunity (EEO) laws and regulations. Black & Veatch does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status or other status protected by law. For our EEO Policy Statement, please click here. Notice to External Search Firms: Black & Veatch does not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Black & Veatch Talent Acquisition engages with search firms directly for hiring needs.

The Transmission Planning Consultant will utilize knowledge in electrical transmission planning and application of grid technologies to assess grid performance and ready the grid for the future challenges represented by plant retirements and renewable integration. The Transmission Planning Consultant will perform a broad range of transmission and operational studies and other consulting services to help clients make decisions backed by business and engineering analysis. This role will contribute to the execution of technical studies and work with project managers to perform the technical execution for projects. + Performs a broad range of studies and other consulting services such as transmission planning and operational studies consisting of power flow, transient stability, transfer capability, short-circuit, voltage analysis, harmonics analysis, electromagnetic, reliability, and economic dispatch associated with congestion management scenarios. + Evaluates regulatory conditions and risks by applying NERC, FERC, and Regional requirements, policies and procedures, production costing, risk assessment techniques, TPL compliance, and generator interconnection principles. + Independently executes transmission system planning studies using industry software such as PSS/E, PSLF, EMTP/ATP, PSCAD, SKM, ETAP, and Promod. + Performs independent evaluation, selection, adaptation, and modification of standard engineering techniques for electric transmission system planning procedures and criteria. + Conducts data analysis and interpretation of engineering, financial, and economic conditions and results, and subsequent technical business implications to client projects. + Analyzes life-cycle costs by developing and incorporating technical assumptions regarding capital costs, operation and maintenance costs, performance estimates, and economic assumptions and forecasts. + Conducts technical and business-related risk assessments that evaluate impacts associated with rules implemented by regulatory agencies. + Develops and conducts detailed financial analysis using a variety of computer-based software. + Develops technical reports and presentations summarizing results of analysis. + Develops client presentations, engineering reviews, financial analysis, and contract administration for the design/planning of utility systems. + Assists project managers in business development activities including proposal development and client relationships. + Support business lines as required by clients. + Performs other duties as assigned + Complies with all policies and standards Qualifications + Bachelor Degree in Engineering or related degree from an ABET accredited program or related degree and 3 years of related experience Required or + Master Degree in Engineering or Business and 2 years of experience Required or + PhD in Engineering and 1 year of experience Required + Prior experience associated with electric utility operations, planning, or consulting. + Experience with power system planning and operations; transient stability, short circuit, and voltage analysis; NERC, FERC, and Regional requirements, policies and procedures; production costing; risk assessment techniques; TPL compliance; generator interconnection; or harmonics analysis. + Experience with electric transmission systems and transmission system planning processes. + Strong computer skills using industry software such as PSS/E, PSLF, EMTP/ATP, PSCAD, SKM, ETAP, and Promod. + Ability to execute various transmission system planning studies. + Knowledge of numerous power regions of the country and independent system operators such as: PJM, MISO, NEISO, SPP, CAISO, WECC, SERC, ERCOT, NYISO + Knowledge of NERC and FERC standards + Ability to provide evaluation, selection, adaptation, and modification of standard engineering techniques for electric transmission system planning procedures and criteria. + Knowledge in standard engineering, construction, and operation techniques, principles, and procedures associated with power transmission facilities. + Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. + Ability to work methodically and analytically in a quantitative problem-solving environment. + Demonstrated leadership skills. + Proven ability to lead, educate, and train a team of consultants and analysts in regards to transmission planning studies. + Ability to independently solve difficult problems that require adaptation and modification of standard techniques, procedures, and criteria. + Excellent written and oral communications skills. + Demonstrated critical thinking skills. + Ability to perform under pressure and tight deadlines and to be effective in on-site work environments. + Ability to manage multiple projects concurrently, including identification of critical path items to ensure deliverable deadlines are met. + Ability to focus on the big picture to effectively and efficiently provide services that meet client needs, while also having the ability to identify and analyze details that are critical to project outcomes. + Willingness to learn new service offerings as client needs and the market requires changes to the service offerings provided by our group + Proficient in Microsoft Office Suite (Word, Excel, PPT). + Ability to travel + Professional Engineer (PE) License Preferred This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled. EEO/Disabled/Veterans Job Engineering Primary Location US-TX-Dallas Other Locations US-TX-Austin, US-TX-Houston Schedule: Full-time Travel: Yes, 5 % of the Time About 1898 & Co. 1898 & Co. is a business, technology and security solutions consultancy where experience and foresight come together to unlock lasting advancements. We innovate today to fuel our clients' future growth, catalyzing insights that drive smarter decisions, improve performance and maximize value. As part of Burns & McDonnell, we draw on more than 120 years of deep and broad experience in complex industries as we envision and enable the future for our clients. Req ID: 251660 Job Hire Type Experienced #LI-EH #E98 N/A

Dashiell is a leading national provider of technical services to the electric utility, power generation, industrial, renewable and energy industries. These services include planning and systems studies, design and engineering, maintenance and testing, program management, construction, and turnkey EPC projects. Built on 50 years of experience handling large scale complex projects; Dashiell is unique in that we are a turnkey Engineering, Construction, and Testing company that specializes in medium and high voltage electrical infrastructure. More information about Dashiell can be found at ***************** Position Title: Substation Engineer Location: 11501 Burnett Rd BLDG 906 STE 200, Austin, TX 78758 Primary Function: Primary Function: Performs engineering work with a focus on substation engineering design including both physical and protection & control practices. Requires knowledge of substation systems from 34.5kV to 500kV with familiarity with basic principles related to the engineering design or high voltage substations. Duties & Responsibilities Employee may be called upon to perform any or all of the following functions: Work within a project team to create all design documents and drawings for a project, including creating wiring diagrams from schematics, generating bills of materials, and applying field mark-ups of project as-built drawings with minimal supervision Perform Engineering support tasks such as relay burden, lighting, load flow, and short circuit calculations with minimal supervision Apply engineering application software to complete engineering tasks such as ground grid design, relay coordination, transformer sizing, and load flow and short circuit studies with minimal supervision Review project Schedules and work with a project engineer to ensure projects remain on schedule Apply engineering standards including NEC, NESC, NEMA, IEEE and ANSI Properly use the document management system Apply corporate standard engineering practices Supervise project activities Communicate and coordinate project activities with project engineer, customer representatives, and others as needed Spend time at job sites to gain hands-on knowledge and additional training in substation construction and design Take personal responsibility for the quality and accuracy of his/her work Bring potential project-related problems and possible solutions to the attention of the responsible party Travel out of town for short periods of time as required by projects and assignments Other duties as assigned Minimum Qualifications / Experience Bachelor degree in Electrical Engineering, or equivalent degrees, from an accredited university. Experience in substation design; successful candidates will have at least 3 years experience in substation engineering design with more senior level positions requiring 7 years or more in hands on engineering design. Senior applicants must be a licensed professional engineer with ability to become licensed in multiple states or must be able to gain license within one year of hire. Familiarity with electrical relays currently utilized in the electric power utility industry Experience in application of relays and metering in an electrical substation at 138kV and above Experience in the design of electrical schematics for relay applications and control systems Experience in the design of connection drawings and cabling Relay coordination experience is a plus Strong knowledge of AC/DC fundamentals Knowledge and understanding of three phase power systems Knowledge and understanding of per-unit mathematics and symmetrical components Knowledge and understanding of substation components and their functions Knowledge of design documents and drawings necessary to complete a projects Knowledge of engineering standards including NEC, NESC, NEMA, IEEE and ANSI Knowledge of common word processing, spreadsheet, and e-mail software Communicating effectively with co-workers, vendors, clients, etc. Ability to work in a team environment. Physical Requirements: This position requires minimal physical effort. Must be able to endure prolonged periods sitting at a desk and working on a computer for a minimum of 8 hours a day While performing the duties of this job, the employee will primarily work indoors, with occasional outdoor exposure to year around weather conditions and noise. Must be able and willing to travel overnight for trainings and/or meetings as required (10%) Working extended hours, including weekends, may be required periodically. May occasionally lift up to 25 pounds at a time. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy. Equal Employment Opportunity Dashiell is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Dashiell Corporation provides a competitive compensation and benefits package. The Company provides life insurance, accidental death & dismemberment insurance, long term disability insurance, and an employee assistance plan at no cost to the employee. Benefit offerings also include a choice of traditional PPO or one of two HDHPs, with corresponding FSA or HSA, dental, vision, supplemental life insurance, short-term disability insurance, critical illness insurance, group accident insurance, hospital indemnity insurance, a 401(k) with immediate vesting, and more! Must be at least 18 years of age and legally authorized to work in the United States on a permanent basis without visa sponsorship. No third-party recruiters, please