Business analyst jobs in Flint, MI - 537 jobs

The Senior NVH & Durability Analyst will perform Finite Element Analysis (FEA) to solve Noise, Vibration & Harshness (NVH) and durability problems to aid engineering in the upfront design of vehicle, aerospace, and amusement park ride structures. The Senior NVH & Durability Analyst will build FEA models and conduct Computer-Aided Engineering (CAE) analysis supported by sound engineering explanation and hand calculations. This position is located in Livonia, MI. Responsibilities: Build FEA models for various applications in the automotive, aerospace, and industrial segments using commercial software (MSC-NASTRAN, ABAQUS, and ANSYS Mechanical). Conduct CAE analysis independently using CAE tools. Support analysis with sound engineering explanation and hand calculations. Review results with lead engineer or supervisor and share with the customer. Recommend alternative analysis approaches and design solutions to meet the functional targets. Interface with customer to complete tasks with a high level of quality while meeting timelines. Contribute to existing and develop new analyses capability as part of continuous improvement. Maintain pertinent information in assigned location and perform data cleanup. Interact confidently and professionally with stakeholders at all levels. Learn different computer-aided engineering software packages quickly. Minimum Requirements: Bachelor of Science in Mechanical Engineering. Minimum 5 years of CAE (Computer-Aided Engineering) experience. Experience in modal, point mobility, and acoustic analysis. Experience in strength, stiffness and stress (including thermal) in linear and nonlinear (material and contact) domains. Experience in size, shape, and other optimization analysis using optimization tools. Strong fundamental knowledge in strength of materials and failure theory for metals and composites and vibration concepts. Strong aptitude in modeling and simulation with ability to solve engineering problems. Good understanding of kinematics, static, and dynamics. Advanced software skills in finite element pre-processors, solvers, and post-processors (Altair Hyperworks, ANSA & META, NASTRAN, ABAQUS, OPTISTRUCT, ANSYS, nCode) and Finite Element Method Fatigue (FEMFAT). Good verbal and written communication skills. Preferred Requirements: Master of Science in Mechanical Engineering specializing in structural dynamics and mechanics, Finite Element Analysis (FEA), or fatigue theory, noise and vibration, and 3 years of Computer-Aided Engineering (CAE) experience. Experience in advanced simulation tools such as Simcenter Amesim, and application in autonomous and electric vehicles. Experience with full vehicle ‘CAE to Test' correlation. Experience with performance optimization and trade-off evaluations for multi-body systems. Experience with suspension and powertrain integration into vehicles using CAE techniques. AI (Artificial Intelligence) and Machining Learning skills. Our Full-Time benefits include medical, dental, vision, life insurance, earned sick time, STD, LTD, 401K, tuition reimbursement, employee referral bonuses, paid vacation, and paid holidays. Roush is an EO employer - Veterans/Disabled and other protected categories. If you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at ************.

OpTech is seeking a skilled (4+ years) Software Developer with hands-on experience in Kofax scanning solutions, Laserfiche DMS, .NET, and VB6 development to design, develop, and maintain secure, scalable applications within a Microsoft-based environment. The ideal candidate will leverage Visual Studio, SQL Server Management Studio (SSMS), and Azure DevOps to build and deploy solutions while collaborating with cross-functional teams via Microsoft Teams. Responsibilities include developing integrations between document management systems, implementing and automating scanning workflows, providing production support, troubleshooting issues with end-users and internal customers, supporting Laserfiche customization and enhancements, and producing technical documentation such as program specifications, data models, and architecture diagrams. Strong problem-solving skills, experience with MS SQL, and a commitment to writing clean, efficient, maintainable code are essential. Minimum 2 days per week is required onsite in Pontiac, MI.

Responsibilities Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive Interior system Thorough knowledge of engineering design & development concepts of automotive Interior system Good Working experience as Design engineer in interior engineering Very good proficiency in CATIA V5. Prepare and execute design release in the 3DExperience PLM system. Experience in design and development of Floor Colsole, and Instrument panel, Ability to resolve design related issues in the manufacturing plant Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Interior assemblies. Knowledge and understanding of Tooling and manufacturing processes Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD&

Akkodis is seeking an Electrified Powertrain Engineer for our Contract Position (12+ Months) role with our client in Auburn Hills, MI. Pay Range: $35/hr. to $42/hr. on w2. The pay may be negotiable based on experience, education, geographic location, and other factors. Role: Electrified Powertrain Engineer Location: Auburn Hills, MI Job Type: Contract (12+ Months) Electrified Powertrain Engineer The Electrified Propulsion System Engineer will work in a diverse lab environment supporting development & durability activities for Electric Drive Motors (EDMs) and Hybrid Propulsion Systems. The test engineer will work with mechanics and product engineers to develop test procedures for electric drive line testing on dynamometers. Required Skills/Abilities: A Bachelor's degree in Mechanical Engineering or Electrical Engineering from an ABET accredited university. Understanding of engine and/or transmission operation, powertrain functions and electrification power flow. Minimum of 3-year experience in test automation systems, and dynamometer test schedule development for various vehicle powertrain configurations. Strong knowledge of test system controls. Must have strong understanding in electric vehicle drive components, energy storage system (E-motors, inverters, Battery, Charger) and interactions between various sub-systems. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at **************************** or ************ Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Location: Lansing, MI (Hybrid - 2 days in office). Candidate must be within 90 minute commute of Lansing MI at time of submittal We are seeking experienced Software Test Analysts to support enterprise software initiatives within a large public sector organization. The ideal candidate will have strong experience in manual and automated testing, a solid understanding of the software development lifecycle, and the ability to work across multiple projects in fast -paced Agile environments. This role requires hands -on testing, analysis, and collaboration with cross -functional teams to ensure high -quality delivery of applications and systems. Key Responsibilities Testing & Quality Assurance Design, develop, and execute manual and automated test cases across web -based and custom applications. Write and maintain reusable test plans, test strategies, and testing scripts. Perform functional, regression, performance, accessibility, integration, and user acceptance testing. Generate and maintain test reports, metrics, and test data. Conduct accessibility and ADA compliance testing using tools such as AccVerify and JAWS. Participate in root -cause analysis and defect triage; document issues clearly in tracking tools such as Azure DevOps. Work in multiple build environments (DEV, UAT, QAT, PRE -PROD) with integrated application lifecycle management. Automation & Technical Skills Write clean, maintainable, and object -oriented Java code for test automation. Automate web applications using frameworks such as Selenium, Playwright, Cypress, or similar. Develop Gherkin scenarios (Given/When/Then) and implement step definitions in Java. Write and execute SQL and P -SQL queries for test data setup, validation, and reporting against Oracle or SQL Server databases. Utilize Git for version control, including branching, merging, and pull requests. Agile & Collaboration Actively participate in Agile/Scrum teams and ceremonies. Collaborate with developers, business analysts, QA, and stakeholders to understand requirements, acceptance criteria, and project priorities. Communicate test results, risks, and issues clearly and effectively. Contribute to continuous improvement of QA processes and team efficiency. Security & Compliance Apply principles of the Secure Application Development Lifecycle (SADLC) in all testing activities. Ensure adherence to organizational and regulatory security standards in testing and reporting. Requirements 5+ years of software testing experience, with proficiency in manual and automated testing. Strong understanding of software testing methodologies and quality assurance processes. Experience designing and executing test plans, test scripts, and test cases. Experience with API testing using tools such as Postman, REST Client, or RESTAssured. SQL/P -SQL query writing experience for test data validation. Experience with Agile/Scrum development processes. Strong written and verbal communication skills. Ability to work independently and collaboratively in a fast -paced, hybrid environment. Nice to Have Experience with Azure DevOps Testing Module. Mobile application testing experience (iOS/Android). Experience with Selenium WebDriver, Playwright (Java), Cypress, or similar automation frameworks. Knowledge of TestNG or other test frameworks. Experience with JMeter, LoadRunner, or other performance/load testing tools. Experience using Eclipse or comparable IDEs Vital Tech Solutions is an Equal Opportunity Affirmative Action employer. We prohibit discrimination in decisions concerning recruitment, hiring, compensation, benefits promotions, training, termination or any other condition of employment or career development. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, marital status, national origin, veteran status, disability status or any other legally protected status.

360 IT Professionals is a Software Development Company based in Fremont, California that offers complete technology services in Mobile development, Web development, Cloud computing and IT staffing. Merging Information Technology skills in all its services and operations, the company caters to its globally positioned clients by providing dynamic feasible IT solutions. 360 IT Professionals work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Our services are vast and we produce software and web products. We specialize in Mobile development, i.e. iPhone and Android apps. We use Objective-C and Swift programming languages to create native applications for iPhone, whereas we use Android Code to develop native applications for Android devices. To create applications that work on cross-platforms, we use a number of frameworks such as Titanium, PhoneGap and Jquery mobile. Furthermore, we build web products and offer services such as web designing, layouts, responsive designing, graphic designing, web application development using frameworks based on model view controller architecture and content management system. Our services also extend to the domain of Cloud Computing, where we provide Salesforce CRM to effectively manage one's business and ease out all the operations by giving an easy platform. Apart from this, we also provide IT Staffing services that can help your organization to a great extent as you can hire highly skilled personnel's through us. We make sure that we deliver performance-driven products that are optimally developed as per your organization's needs. Take a shot at us for your IT requirements and experience a radical change. Reviews analyze and evaluate business systems and user needs. Experienced with business process reengineering and identifying new applications of technology to business problems to make business more effective. Years of Experience: 12+ years of experience in the field or in a related area. Job Description: Relies on experience and judgment to plan and accomplish goals, independently performs a variety of complicated tasks, a wide degree of creativity and latitude is expected. •Reviews analyze and evaluate business systems and user needs. Formulates systems to parallel overall business strategies. Experienced with business process reengineering and identifying new applications of technology to business problems to make business more effective. Familiar with industry standard (including Legacy, Core, and Emerging technologies), business process mapping, and re-engineering. Prepares solution options, risk identification, and financial analyses such as cost/benefit, ROI, buy/build, etc. Writes a detailed description of user needs, program functions, and steps required to develop or modify computer programs. •Prepare and document Functional and Technical Specifications for reporting and data warehouse work. Assist with business warehouse/intelligence support and enhancements. Develops RFPs. Assist in deployment and management of end-user reporting tools and platforms. Work with IT and business project teams to understand reporting and data warehousing requirements and propose solutions. Document and provide knowledge transfer to the rest of the Enterprise Reporting Team for all solutions. •Knowledge of commonly-used concepts, practices, and procedures within a particular field. Familiar with relational database concepts, and client-server concepts. Relies on limited experience and judgment to plan and accomplish goals. Performs a variety of tasks. Works under general supervision; typically reports to a project manager. A certain degree of creativity and latitude is required. Additional Information Thanks and Regards, Ankur Bhatia

Job Description Quality Control: • Review daily, weekly, and monthly manual reports/data extracts produced and Business Analyst Team for accuracy and resolve issues as needed. • Publish the reports/data extracts to customers based on the distribution lists. Scope: • Work with Business Analyst to review customers' requests and determine how to translate the requested report into a physical form, which includes defining the measures, dimensions, and layout of the report/data extract. Customer Support: • Provide ad hoc reports and report development in a timely manner. Work with Business Analyst to assess the correct priority for requested items. • Attend project meetings at a customer's request providing any analysis or other information required by the customer. • Generate SQL reports/ file data extracts for Client Services Department accurately and timely. • Create Design document for reports and data extracts . Reports must be accurate and within scheduled due dates. • Provide formal and informal reporting training for the business users in Client Services department. Ad hoc Reports and Analytical: • Assess customers' requests and provide ad hoc reporting (using BI tools, which includes SQL, and Excel) and analysis based on those requests. Work with Business Analyst to determine priority. • Trouble shoot issues with report and data integrity as needed. • Utilize SQL and business requirements to develop new reports/data extracts and provide ad hoc support. • Resolve production issues for existing reports/data extracts. Support Business Team: • Assist with special initiatives/projects specific to related MBFS initiatives. • Represent project team during participation on key project initiatives. • Work with Business Analyst to identify data gaps and utilize the Data Analyst team to incorporate needed information during quarterly IT updates. Business Analysis and Consulting: • Work with Business Analyst to provide analytical and consulting engagements with in the functional areas of reporting responsibility. • Work with Business Analyst to identify key areas of opportunity through process mapping or data analysis that would reduce or eliminate redundant reporting processes. • Reduce the number of manually generated reports/data extracts through automation

Our Purpose At Vibe, we are driven by our mission to elevate community and create opportunity . We believe in fostering an environment of inclusivity where every team member has the chance to grow professionally. Guided by our core values - be i nclusive, educate, embrace change, and seek opportunities - we are dedicated to making a positive impact in the lives of our members and communities. As we continue to grow and expand our team, we are seeking passionate individuals who share our vision and are eager to join us in our journey. If you are someone who is passionate about making a difference and is committed to creating a brighter future for our communities, we invite you to explore this exciting opportunity at Vibe! Position Purpose This position works as part of the Business Intelligence (BI) Team that supports the Credit Union to utilize data for enhanced member service and decision making. The BI Analyst utilizes data visualization technology and innovation to assist business units with requests for data in the form of reports, dashboards, and analysis to support their business processes and initiatives. This role transforms data into information and knowledge that enables key business processes and strategic decisions while presenting insights to all levels of management. A BI analyst must have an eye for accuracy and desire to provide solutions to improve and maintain the quality of data while proactively recommending insights and turning that knowledge into a story to benefit members and enable better decision making. Essential Duties Uses data to identify trends, patterns, risks and opportunities that may impact the Credit Union and communicates findings to the appropriate business partner with Provides clear, insightful data analysis that tells a story and helps leaders make better decisions, using a variety of communication methods (Power BI, Excel, PowerPoint, ). Creates business intelligence dashboards with data visualizations and a focus on end-user experience that clearly outlines KPIs with visual graphics. Develops and presents standard reports and dashboards that include descriptive statistics, data visualizations, and text extracts that support strategic decision making and business processes to benefit members of the Credit Union. Analyzes how BI and data solutions can be applied to enhance member service, reduce cost, increase revenue, improve efficiency, and provide higher quality data and reporting across the Credit Union. Develops complex queries using SQL and BI data visualization Applies appropriate methodologies for collecting, analyzing and presenting data and information by making use of BI reporting tools (e.g. SQL Server, Power BI, etc.) Identify strategic analytical solutions through research and analysis of data and business Communicates and collaborates with business partners and leaders regarding areas of opportunity to leverage data and analytic solutions to enable data driven decision- Monitors data quality and works with business partners on processes to improve quality of data. Assists with development of data quality processes, defining data elements, and other data governance solutions. Assists in the development of data training programs throughout the Provides documentation, topics, and support for complex questions. Integrates data sources from multiple systems to provide seamless data Partners with BI team members, IT, database and server administrators to improve performance of queries and dashboards. Responsible for investigating and resolving day-to-day data visualization and reporting Performs other duties and assist other employees, as Education/Experience Minimum 2 years of work experience and/or education in business analytics One or more years of similar or related experience preferred Skills/Abilities Demonstrates aptitude/willingness to learn: Discovering and presenting actionable data insights Data analysis of Credit Union data Reporting tools (Jaspersoft, SSRS) Data visualization tools (Power BI, Tableau) How to query data Structure and content of Credit Union data and databases How to improve processes using data Develop and troubleshoot SQL statements Familiar with programming languages such as SQL and DAX Ability to work with business partners and vendors on data This includes interpreting data specification documents, working with IT on file transfers, and delivering automated data solutions. Self-motivated with the ability to prioritize, manage multiple projects concurrently, and meet deadlines. Flexible and adaptable to changing priorities and Highly effective time and project management skills, including ability to coordinate development, testing and implementation. Ability to complete tasks with accuracy and in a timely Excellent verbal and written communications skills. Must be able to communicate effectively and confidently with users, team members, departments and all personnel across the Credit Union. Ability to work independently and in a team Strong problem solving, analytical, logical reasoning, customer service and training Physical Requirements These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the position. Reasonable accommodations can be made to enable people with disabilities to perform the described essential functions of the position. While performing the responsibilities of the job, the employee is required to hear, see, talk, stand, walk, stoop, kneel, lift, push, pull, and grasp.

Lumen connects the world. We are igniting business growth by connecting people, data and applications - quickly, securely, and effortlessly. Together, we are building a culture and company from the people up - committed to teamwork, trust and transparency. People power progress. We're looking for top-tier talent and offer the flexibility you need to thrive and deliver lasting impact. Join us as we digitally connect the world and shape the future. **The Role** Consulting-level, technical professional. We are seeking an individual with a passion for cloud AI/ML initiatives, eager to drive innovation and leverage cutting-edge technologies to solve complex problems. Experience in a specialty or professional field and strong business acumen. Understands advanced principles, theories, and concepts. Works on complex or unique issues and leverages critical thinking skills to resolve problems. Exercises broad latitude in determining and executing objectives and approaches to assignments. Acts independently toward general results. Empowered to modify or adapt standard procedures to meet different situations. Contributes to the establishment of the organization's strategic goals. **The Main Responsibilities** - Enhances the alignment between business processes and information technology - Facilitates broad discussion to align business units to common solutions - Coaches subject matter experts through the program or project lifecycle to ensure execution - Responsible for actively resolving day-to-day technology needs, including system or process analysis - Understands technical problems and solutions in relation to the current, as well as the future business environment - Suggests plans to integrate new and existing processes - Provides input and supports planning and prioritization for business process engineering related activities - Identifies processes for improvement - May need to document existing processes - Identifies and analyzes gaps between current processes and the desired stated - Develop process performance measures and plans the transition to a new process - Provides counsel and leadership on future use of technology and business process improvements **What We Look For in a Candidate** - Bachelors degree or equivalent education and experience. - 5-10 years related experience. **Compensation** This information reflects the anticipated base salary range for this position based on current national data. Minimums and maximums may vary based on location. Individual pay is based on skills, experience and other relevant factors. Location Based Pay Ranges $103,711 - $138,281 in these states: AL AR AZ FL GA IA ID IN KS KY LA ME MO MS MT ND NE NM OH OK PA SC SD TN UT VT WI WV WY $108,896 - $145,195 in these states: CO HI MI MN NC NH NV OR RI $114,082 - $152,109 in these states: AK CA CT DC DE IL MA MD NJ NY TX VA WA Lumen offers a comprehensive package featuring a broad range of Health, Life, Voluntary Lifestyle benefits and other perks that enhance your physical, mental, emotional and financial wellbeing. We're able to answer any additional questions you may have about our bonus structure (short-term incentives, long-term incentives and/or sales compensation) as you move through the selection process. Learn more about Lumen's: Benefits (**************************************************** Bonus Structure \#LI-Remote Requisition #: 340577 **Background Screening** If you are selected for a position, there will be a background screen, which may include checks for criminal records and/or motor vehicle reports and/or drug screening, depending on the position requirements. For more information on these checks, please refer to the Post Offer section of our FAQ page (************************************* . Job-related concerns identified during the background screening may disqualify you from the new position or your current role. Background results will be evaluated on a case-by-case basis. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. **Equal Employment Opportunities** We are committed to providing equal employment opportunities to all persons regardless of race, color, ancestry, citizenship, national origin, religion, veteran status, disability, genetic characteristic or information, age, gender, sexual orientation, gender identity, gender expression, marital status, family status, pregnancy, or other legally protected status (collectively, "protected statuses"). We do not tolerate unlawful discrimination in any employment decisions, including recruiting, hiring, compensation, promotion, benefits, discipline, termination, job assignments or training. **Disclaimer** The job responsibilities described above indicate the general nature and level of work performed by employees within this classification. It is not intended to include a comprehensive inventory of all duties and responsibilities for this job. Job duties and responsibilities are subject to change based on evolving business needs and conditions. In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Please be advised that Lumen does not require any form of payment from job applicants during the recruitment process. All legitimate job openings will be posted on our official website or communicated through official company email addresses. If you encounter any job offers that request payment in exchange for employment at Lumen, they are not for employment with us, but may relate to another company with a similar name.

Why UKG: At UKG, the work you do matters. The code you ship, the decisions you make, and the care you show a customer all add up to real impact. Today, tens of millions of workers start and end their days with our workforce operating platform. Helping people get paid, grow in their careers, and shape the future of their industries. That's what we do. We never stop learning. We never stop challenging the norm. We push for better, and we celebrate the wins along the way. Here, you'll get flexibility that's real, benefits you can count on, and a team that succeeds together. Because at UKG, your work matters-and so do you. Job Summary We are seeking a strategic and results-driven Business Applications Analyst to drive and manage cross-functional transformation initiatives that align with our company's strategic objectives. This role requires a dynamic leader with a proven ability to transform business processes and functions through effective cross-functional teaming, rigorous program management, and exceptional communication. The ideal candidate will serve as a thought leader and change agent, driving innovation and operational excellence across the enterprise. Key Responsibilities - Thought Leadership: Recommend creative and innovative solutions to strategic business problems leveraging industry best practices and insights from the analysis of internal and external data. - Operational Improvements: Identify inefficiencies and lead efforts to streamline operations and improve productivity. - Strategic Initiative Execution: Partner with Business Leads to support the planning, execution, and delivery of enterprise-wide transformation initiatives, ensuring alignment with strategic goals. - Cross-Functional Collaboration: Lead teams across departments (e.g., Sales, Finance, Operations, Product, Technology) to ensure seamless integration and execution of transformation efforts. - Program Management: Create project plans, manage timelines, budgets, risks, and resources, and ensure successful delivery of transformation projects. - Change Management: Design and implement change management strategies to support adoption and sustainability of new processes and technologies. - Stakeholder Engagement: Communicate effectively with stakeholders at all levels to ensure transparency, alignment, and buy-in. - Performance Monitoring: Track metrics that will monitor the success of transformation initiatives; adjust strategies based on performance data. - Communication & Reporting: Prepare and deliver clear, concise updates to stakeholders and leadership. Create visualizations and presentations to communicate project status, risks, and recommendations. Qualifications - 10+ years of experience in program management, business transformation, or strategic operations. - Proven track record for partnering with cross-functional teams and delivering significant business impact (e.g., Finance, Sales, Operations, Product Development, Customer Experience, Customer Success or Cloud), with a strong understanding of their KPIs and operational models. - Exceptional organizational, analytical, and problem-solving skills. - Strong interpersonal and communication skills, with the ability to influence and lead cross-functional teams. - Project Management certification (e.g., PMP, Agile, Lean Six Sigma) strongly preferred. - Experience with enterprise project management tools (e.g., Asana, MS Project, Smartsheet). Service Now SPM a plus. Success Metrics - Measurable improvements in operational efficiency, customer satisfaction, and profitability. - Positive stakeholder feedback and high adoption rates of new processes or systems. - Timely and on-budget delivery of transformation projects. Company Overview: UKG is the Workforce Operating Platform that puts workforce understanding to work. With the world's largest collection of workforce insights, and people-first AI, our ability to reveal unseen ways to build trust, amplify productivity, and empower talent, is unmatched. It's this expertise that equips our customers with the intelligence to solve any challenge in any industry - because great organizations know their workforce is their competitive edge. Learn more at ukg.com. Equal Opportunity Employer UKG is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, disability, religion, sex, age, national origin, veteran status, genetic information, and other legally protected categories. View The EEO Know Your Rights poster (************************************************************************************************** UKG participates in E-Verify. View the E-Verify posters here (******************************************************************************************** . It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Disability Accommodation in the Application and Interview Process For individuals with disabilities that need additional assistance at any point in the application and interview process, please email ****************** . The pay range for this position is $145,600.00 to $200,000.00, however, base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a short-term incentive and a long-term incentive as part of total compensation. Information about UKG's comprehensive benefits can be reviewed on our careers site at ********************************************* It is the policy of Ultimate Software to promote and assure equal employment opportunity for all current and prospective Peeps without regard to race, color, religion, sex, age, disability, marital status, familial status, sexual orientation, pregnancy, genetic information, gender identity, gender expression, national origin, ancestry, citizenship status, veteran status, and any other legally protected status entitled to protection under federal, state, or local anti-discrimination laws. This policy governs all matters related to recruitment, advertising, and initial selection of employment. It shall also apply to all other aspects of employment, including, but not limited to, compensation, promotion, demotion, transfer, lay-offs, terminations, leave of absence, and training opportunities.

Cardinal Health Sonexus Access and Patient Support helps specialty pharmaceutical manufacturers remove barriers to care so that patients can access, afford, and remain on the therapy they need for a better quality of life. Our diverse expertise in pharma, payer, and hub services allows us to deliver best-in-class solutions-driving brand and patient markers of success. We're continuously integrating advanced and emerging technologies to streamline patient onboarding, qualification and adherence. Our non-commercial specialty pharmacy is centralized at our custom-designed facility outside of Dallas, Texas, empowering manufacturers to rethink the reach and impact of their products. Together, we can get life-changing therapies for patients who need them-faster. **Job Summary** Datahub is responsible for sending and receiving PHI data that is generated in the CRM as part of the patient journey while they are seeking and on therapy. This includes integrations with multiple clients, pharmacies, and third-party vendors via file feed or API. We're seeking a proactive, detail-oriented, and process-driven Business Analyst to join our team and establish standards, streamline processes, and enforce consistency. **Responsibilities** + Lead and standardize the project estimation process as it relates to Data Hub to drive efficiencies and meet estimation SLAs + Standardize the User Story process within Data Hub + Document and maintain Data Hub best practices, checklists, playbook, specifications, and other relevant documentation + Collaborate with multiple stakeholders to identify opportunities and translate business needs into data feed and/or migration solutions + Communicate requirements clearly and effectively to both technical and non-technical audiences + Maintain weekly project reports, client request tool, and other reporting channels + Write detailed and consistent User Stories as it relates to the clients' data needs and the project ask at hand + Understand the upstream and downstream impacts of data in the Sonexus technology ecosystem + Work in conjunction with the BA and QA CoE to ensure timely communication, technical accuracy, thorough requirements, and other project necessities + Learn the Sonexus business, its clients, and internal processes + Stay current with emerging data technologies and methodologies **Qualifications** + Bachelor's degree in a relevant field (e.g., Data Science, Computer Science) or equivalent experience preferred. + 5+ years of experience in IT business analysis, preferably in healthcare or pharmacy-related domains preferred. + High proficiency in SQL and cloud-based data environments (GCP preferred). + Strong experience with data visualization tools (e.g., Power BI or Tableau). + Familiarity with healthcare/pharmacy data sources and metrics is a plus. **What is expected of you and others at this level** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $80,900 - $115,500 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 03/08/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Stellantis is on a mission to transform how we manage complexity, innovation, and global collaboration. We're seeking a proactive and skilled Business Analyst/Project Manager to play a pivotal role in reshaping our ICT ecosystem for Embedded Software Release and Distribution process. This is more than a systems role-it's a strategic opportunity to drive the future of business and operational excellence in Stellantis. The selected candidate will hold a strategic position within the ICT department, focusing on providing the solutions that enable the entire embedded software configuration and delivery process. Key Responsibilities: Define and Execute a Strategy: Providing technical advice and strategic support to define and implement the Next Gen Embedded SW configuration and delivering system. Your vision will bridge current capabilities with future needs, ensuring a seamless and scalable transformation. Leverage Industry-Standard PLM Solutions: Lead the integration and deployment of out-of-the-box PLM tools to accelerate implementation, reduce customization overhead, and align with industry best practices. Ensure seamless interoperability with existing Stellantis systems while maximizing the value of vendor-supported capabilities. Global Collaboration: Working closely with development, production, and other international corporate functions to foster effective communication and operational synergy. Innovation and Best Practices: Defining and implementing methodologies and best practices for software configuration management and actively contributing to the innovation of the solution and internal processes. End-to-End Coordination: Managing the solution to enable entire lifecycle of the embedded software, ensuring precise configuration and timely delivery in line with the required quality standards.

Stellantis is on a mission to transform how we manage complexity, innovation, and global collaboration. We're seeking a proactive and skilled Business Analyst/Project Manager to play a pivotal role in reshaping our ICT ecosystem for Embedded Software Release and Distribution process. This is more than a systems role-it's a strategic opportunity to drive the future of business and operational excellence in Stellantis. The selected candidate will hold a strategic position within the ICT department, focusing on providing the solutions that enable the entire embedded software configuration and delivery process. Key Responsibilities: * Define and Execute a Strategy: Providing technical advice and strategic support to define and implement the Next Gen Embedded SW configuration and delivering system. Your vision will bridge current capabilities with future needs, ensuring a seamless and scalable transformation. * Leverage Industry-Standard PLM Solutions: Lead the integration and deployment of out-of-the-box PLM tools to accelerate implementation, reduce customization overhead, and align with industry best practices. Ensure seamless interoperability with existing Stellantis systems while maximizing the value of vendor-supported capabilities. * Global Collaboration: Working closely with development, production, and other international corporate functions to foster effective communication and operational synergy. * Innovation and Best Practices: Defining and implementing methodologies and best practices for software configuration management and actively contributing to the innovation of the solution and internal processes. * End-to-End Coordination: Managing the solution to enable entire lifecycle of the embedded software, ensuring precise configuration and timely delivery in line with the required quality standards. Basic Qualifications: * Bachelor's degree in engineering, Computer Science, or a related field. * 5+ years of working experience with Product Lifecycle Management * Knowledge of main PLM concepts * Experience in ICT environment a plus * Agile practice is a plus. * Automotive Engineering & Embedded Processes: Understanding of automotive engineering and hands-on experience with embedded processes. Familiarity with industry standards and best practices is essential for driving innovation in our ICT-driven solutions. * Proven experience as an ICT Solution Architect, Business Analyst, Subject Matter Expert, or a similar role. * Analytical & Problem-Solving Skills: Good analytical abilities with a track record of identifying and resolving complex technical challenges, ensuring the reliability and efficiency of the software configuration and delivery lifecycle. * Team Collaboration & Communication: Ability to work effectively in a collaborative, team-oriented environment and communicate clearly with stakeholders at all levels, both locally and globally.

Business Systems Analyst Internship - East Lansing, MI This is a paid Internship with an hourly rate of $19.50/hr Duration: May 2026 - August 2026 Location: Based in our East Lansing, MI office, you'll have the opportunity to contribute to the local community while being an integral part of our organization. Are you a driven and detail-oriented student with a passion for technology and business processes? Do you have a knack for organizing information and an eagerness to contribute to a dynamic team? If so, we have the perfect opportunity for you! GreenStone Farm Credit Services is thrilled to offer an exceptional opportunity for a driven individual to join our team as a Business Systems Analyst Intern. In this role, you will have the unique opportunity to work with cutting-edge technology while collaborating with cross-functional teams to enhance our product documentation and knowledge management. What You'll Gain by becoming at GreenStone Intern: * Hands-on experience in the agricultural finance industry. * Networking opportunities with professionals in the field. * The chance to work on meaningful projects that make a difference in rural communities. * Mentorship and guidance from experienced professionals. * A dynamic and supportive work environment. Key Responsibilities of a Business Systems Analyst Intern: * Conduct a comprehensive review of products that have been newly introduced or revamped with Journey+ technology. * Organize and maintain a detailed inventory of these products. * Collaborate with the team to create and update product documentation and knowledge articles. * Ensure that all relevant information is accurately documented for each product. * Collaborate with technical teams to extract detailed technical information and ensure it is well-documented. Requirements: * Must be pursuing a bachelor's degree in computer science, business or accounting preferred. * Sophomore status or above in your academic program. * A minimum GPA of 3.00 is required. * Excellent analytical and problem-solving skills. * Proficient in Microsoft Office Suite, particularly Excel and PowerPoint. * Familiarity with SharePoint, Confluence and Salesforce * Strong communication and teamwork skills. * Self-motivated and eager to learn. About Us... GreenStone Farm Credit Services is over an $15 billion financial services institution with over 600 employees in 35 locations throughout Michigan and northeast Wisconsin. GreenStone provides short term and long-term credit to our customers, as well as a variety of other products and services, such as crop insurance, life and disability insurance, accounting services, tax planning and preparation, and appraisals. Don't miss the chance to kickstart your career with an internship with GreenStone Farm Credit Services. Apply today and be a part of our mission to support agriculture and rural communities! GreenStone Farm Credit Services is an equal opportunity employer. It is our policy to provide equal employment opportunity to all persons regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, genetic information, or any other characteristic protected by law. We comply with all federal, state and local equal employment opportunity regulations. We conduct all personnel decisions and processes relating to our employees and job applicants in an environment free of discrimination and harassment.

About Us Niterra North America, Inc., established in 1936 and formerly known as NGK Spark Plugs(U.S.A.), Inc., is a global leader in spark plug and oxygen sensor technology and quality. With a legacy of innovation and excellence, Niterra is evolving its business portfolio, leveraging core ceramic technologies to venture beyond traditional domains. The company is committed to developing solutions that address social issues and promote sustainability. Why Work for Niterra? * Comprehensive Health Benefits: Medical, dental, vision, and life insurance * Financial Security: Short-term and long-term disability coverage * Retirement Savings: 401(k) plan with a generous company match of up to 6% * Time Off: Generous paid time off, including vacation, sick leave, and holidays * Work-Life Balance: Paid maternity and paternity leave About the Role: The SAP Business Analyst in the manufacturing industry plays a critical role in bridging the gap between business needs and SAP technology solutions. This position is responsible for analyzing, designing, and optimizing SAP processes to enhance operational efficiency and support manufacturing workflows. The analyst collaborates closely with cross-functional teams including production, supply chain, finance, and IT to gather requirements and translate them into effective SAP configurations and enhancements. By leveraging deep knowledge of SAP modules relevant to manufacturing, the role ensures that system implementations and upgrades align with business objectives and compliance standards. Ultimately, the SAP Business Analyst drives continuous improvement initiatives that enable the organization to maintain competitive advantage and operational excellence. Responsibilities: * Act as an internal consultant within the IT Enterprise Systems Group, supporting regional affiliates in the effective use of SAP FICO. (Finance and Controlling) * Analyze and evaluate financial processes to identify areas for improvement and optimization. * Configure and customize SAP FICO modules to align with evolving business needs. * Gather, analyze, and document detailed business requirements for system enhancements and modifications. * Design and propose SAP FICO solutions that address business challenges and align with best practices. * Conduct system testing and support the implementation of new functionalities and enhancements. * Provide ongoing user support, including issue resolution and troubleshooting within the SAP FICO environment. * Create and maintain clear documentation for system configurations, business processes, and user guides. * Collaborate with cross-functional teams including Operations, other SAP functional areas, Internal Audit, and PMO, to drive successful solution deployment. * Ensure SAP solutions support both current operations and future business objectives. * Adhere to all company policies and procedures, including IATF, ISO, ISMS, TISAX, QMS, J-Sox, and safety-related policies. * Gather and document detailed business requirements from stakeholders across manufacturing, supply chain, and finance departments. * Analyze current SAP processes and identify opportunities for system improvements and automation to support manufacturing operations. * Collaborate with SAP technical teams to design, test, and implement SAP solutions that meet business needs. * Provide ongoing support and training to end-users to ensure effective utilization of SAP systems. * Monitor SAP system performance and troubleshoot issues related to manufacturing modules such as PP, MM, and SD. * Coordinate with project managers and business leaders to prioritize SAP enhancement projects and ensure timely delivery. * Develop and maintain comprehensive documentation including process flows, functional specifications, and user manuals. Minimum Qualifications: * Bachelor's degree in Finance, Accounting, Computer Science or a related field required * Minimum 5 years of experience as an SAP Business Analyst or Functional Consultant * Expertise in SAP FICO including configuration and functionality * Strong experience in Controlling (CO), particularly product costing * Solid understanding of FI/CO integration with other SAP modules such as SD(sales distribution) and MM(material management) * Proficiency in SAP ECC and/or SAP S/4HANA in relation to FICO * Knowledge of ABAP debugging and experience collaborating with developers on custom solutions * Understanding of financial accounting principles and core business processes * Strong analytical skills with the ability to interpret data and identify trends * Experience writing and executing test cases across the testing lifecycle (Unit, UAT, Regression), and documenting results * Familiarity with prototyping or developing proofs of concept for enhancements * Experience in enterprise application implementation and maintenance using agile methodology * Participation as a key team member in at least one full implementation cycle * Strong understanding of SAP modules relevant to manufacturing such as Production Planning (PP), Materials Management (MM), and Sales & Distribution (SD). * Proven experience in gathering and translating business requirements into SAP functional specifications.

Job Description About Us Niterra North America, Inc., established in 1936 and formerly known as NGK Spark Plugs(U.S.A.), Inc., is a global leader in spark plug and oxygen sensor technology and quality. With a legacy of innovation and excellence, Niterra is evolving its business portfolio, leveraging core ceramic technologies to venture beyond traditional domains. The company is committed to developing solutions that address social issues and promote sustainability. Why Work for Niterra? Comprehensive Health Benefits: Medical, dental, vision, and life insurance Financial Security: Short-term and long-term disability coverage Retirement Savings: 401(k) plan with a generous company match of up to 6% Time Off: Generous paid time off, including vacation, sick leave, and holidays Work-Life Balance: Paid maternity and paternity leave About the Role: The SAP Business Analyst in the manufacturing industry plays a critical role in bridging the gap between business needs and SAP technology solutions. This position is responsible for analyzing, designing, and optimizing SAP processes to enhance operational efficiency and support manufacturing workflows. The analyst collaborates closely with cross-functional teams including production, supply chain, finance, and IT to gather requirements and translate them into effective SAP configurations and enhancements. By leveraging deep knowledge of SAP modules relevant to manufacturing, the role ensures that system implementations and upgrades align with business objectives and compliance standards. Ultimately, the SAP Business Analyst drives continuous improvement initiatives that enable the organization to maintain competitive advantage and operational excellence. Responsibilities: Act as an internal consultant within the IT Enterprise Systems Group, supporting regional affiliates in the effective use of SAP FICO. (Finance and Controlling) Analyze and evaluate financial processes to identify areas for improvement and optimization. Configure and customize SAP FICO modules to align with evolving business needs. Gather, analyze, and document detailed business requirements for system enhancements and modifications. Design and propose SAP FICO solutions that address business challenges and align with best practices. Conduct system testing and support the implementation of new functionalities and enhancements. Provide ongoing user support, including issue resolution and troubleshooting within the SAP FICO environment. Create and maintain clear documentation for system configurations, business processes, and user guides. Collaborate with cross-functional teams including Operations, other SAP functional areas, Internal Audit, and PMO, to drive successful solution deployment. Ensure SAP solutions support both current operations and future business objectives. Adhere to all company policies and procedures, including IATF, ISO, ISMS, TISAX, QMS, J-Sox, and safety-related policies. Gather and document detailed business requirements from stakeholders across manufacturing, supply chain, and finance departments. Analyze current SAP processes and identify opportunities for system improvements and automation to support manufacturing operations. Collaborate with SAP technical teams to design, test, and implement SAP solutions that meet business needs. Provide ongoing support and training to end-users to ensure effective utilization of SAP systems. Monitor SAP system performance and troubleshoot issues related to manufacturing modules such as PP, MM, and SD. Coordinate with project managers and business leaders to prioritize SAP enhancement projects and ensure timely delivery. Develop and maintain comprehensive documentation including process flows, functional specifications, and user manuals. Minimum Qualifications: Bachelor's degree in Finance, Accounting, Computer Science or a related field required Minimum 5 years of experience as an SAP Business Analyst or Functional Consultant Expertise in SAP FICO including configuration and functionality Strong experience in Controlling (CO), particularly product costing Solid understanding of FI/CO integration with other SAP modules such as SD(sales distribution) and MM(material management) Proficiency in SAP ECC and/or SAP S/4HANA in relation to FICO Knowledge of ABAP debugging and experience collaborating with developers on custom solutions Understanding of financial accounting principles and core business processes Strong analytical skills with the ability to interpret data and identify trends Experience writing and executing test cases across the testing lifecycle (Unit, UAT, Regression), and documenting results Familiarity with prototyping or developing proofs of concept for enhancements Experience in enterprise application implementation and maintenance using agile methodology Participation as a key team member in at least one full implementation cycle Strong understanding of SAP modules relevant to manufacturing such as Production Planning (PP), Materials Management (MM), and Sales & Distribution (SD). Proven experience in gathering and translating business requirements into SAP functional specifications.

AI Demo Engineer Employment Type: Full-Time Compensation: $115,000.00 - $132,500.00 (Range applies to US candidates only) + Benefits/Variable Comp/Equity - Range may vary based on experience. Benefits Offered: Vision, Medical, Life, Dental, 401K Summary As an AI Demo Engineer at OneStream, you'll build and maintain demo applications and content that showcase our AI capabilities and the broader OneStream platform. You'll partner with Sales, Presales, and Platform teams to turn real customer use cases into clear, hands-on demos that highlight business value. Day to day, you'll prepare sample data, script repeatable demo flows, and incorporate new product features as they launch. You'll gather feedback from field teams and customers to refine assets, and contribute lightweight documentation and runbooks so others can reuse your work. Primary Duties and Responsibilities Create and continuously enhance OneStream's AI-focused demo assets to enable shorter, more successful sales cycles and increased deal sizes. Stay current on new OneStream features and incorporate them into demos. Translate complex business challenges into clear, compelling demo content and technical narratives. Build and manage data pipelines using C#, SQL, and Python programming languages. Collaborate with Sales and Presales to tailor demos for partners, prospects, and customers. Contribute documentation, runbooks, and reusable sample content for the field. Required Education and Experience Bachelor's degree in computer science, data science, or relevant combination of education and experience. 0-1 years of industry experience in business intelligence, applied machine learning and analytics. 2-5 years of experience in Application and/or Database Management including being a lead in innovative demo design strategies, and deploying applications. Familiarity with corporate, enterprise, or financial planning, consolidation, and management systems (OneStream, Hyperion Financial Management, SAP, etc.). Proficiency in: SQL. Data Visualization via OneStream, Microsoft Excel, Power BI, Tableau, Qlik Sense, etc. Basic exposure to C# and/or Python. OneStream Knowledge. Preferred Education and Experience 1 year of OneStream implementation consulting experience, with a preference in leading software implementations. Knowledge, Skills, and Abilities Ability to clearly translate complex concepts and apply them to modern business. Ability to clearly define and logically resolve complex problems. Strong organization skills to lead and deliver complex projects on schedule with advising support. Ability to multi-task and prioritize ongoing activities based on importance. Quick learner who can understand and self-teach new technologies. Who We Are OneStream is how today's Finance teams can go beyond just reporting on the past and Take Finance Further by steering the business to the future. It's the only enterprise finance platform that unifies financial and operational data, embeds AI for better decisions and productivity, and empowers the CFO to become a critical driver of business strategy and execution. Our vision is to be the operating system for modern finance, digitizing core financial functions and empowering the CFO to become a critical driver of business strategy. To learn more visit ****************** Why Join The OneStream Team Transparency around corporate structure, salary, and benefits. Core value of customer success. Variety of project work (not industry-specific). Strong culture andcamaraderie. Multiple training opportunities. Benefits at OneStream OneStream employees are passionate, hardworking individuals who go above and beyond to keep our customers happy and follow through on our mission statement. They consistently deliver the best and in turn, we make every effort to keep them cared for and happy. A sample of the benefits we provide are: Excellent Medical Plan. Dental & Vision Insurance. Life Insurance. Short & Long Term Disability. Vacation Time. Paid Holidays. Professional Development. Retirement Plan. All candidates must be legally authorized to work for any company in the country where this position is located without sponsorship. OneStream is an Equal Opportunity Employer. #LI-REMOTE #LI-TO1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Stellantis is transforming how we manage complexity, innovation, and global collaboration within the System Engineering domain. We're looking for a proactive BA Project Manager to play a key role in the transformation of our System Engineering Toolchain. This strategic role goes beyond systems-it's about shaping the future of operational excellence across our global engineering ecosystem. The selected candidate will hold a strategic position within the ICT department, focusing on providing the solutions that enable the entire embedded software configuration and delivery process. Key responsibilities: Strategic Planning & Execution: Support and implement the next-generation System Engineering solution. Provide technical and strategic guidance to align current capabilities with future needs, ensuring a scalable and seamless transformation. PLM Integration & Optimization: Lead the deployment of industry-standard PLM tools with minimal customization. Ensure smooth integration with existing Stellantis systems while maximizing the value of vendor-supported features. Lifecycle Management: Oversee the configuration and deployment of the solution and processes based on the V model of System Engineering perimeters such as requirements management, verification and validation, system architecture design and electrical and electronic architecture design ensuring accuracy, traceability, and adherence to quality standards. Cross-Functional Collaboration: Partner with global teams across development, production, and corporate functions to drive alignment, communication, and operational efficiency. Process Innovation & Best Practices: Define and promote best practices in system engineering, continuously improving internal processes and contributing to innovative solution development.

Stellantis is transforming how we manage complexity, innovation, and global collaboration within the System Engineering domain. We're looking for a proactive BA Project Manager to play a key role in the transformation of our System Engineering Toolchain. This strategic role goes beyond systems-it's about shaping the future of operational excellence across our global engineering ecosystem. The selected candidate will hold a strategic position within the ICT department, focusing on providing the solutions that enable the entire embedded software configuration and delivery process. Key responsibilities: * Strategic Planning & Execution: Support and implement the next-generation System Engineering solution. Provide technical and strategic guidance to align current capabilities with future needs, ensuring a scalable and seamless transformation. * PLM Integration & Optimization: Lead the deployment of industry-standard PLM tools with minimal customization. Ensure smooth integration with existing Stellantis systems while maximizing the value of vendor-supported features. * Lifecycle Management: Oversee the configuration and deployment of the solution and processes based on the V model of System Engineering perimeters such as requirements management, verification and validation, system architecture design and electrical and electronic architecture design ensuring accuracy, traceability, and adherence to quality standards. * Cross-Functional Collaboration: Partner with global teams across development, production, and corporate functions to drive alignment, communication, and operational efficiency. * Process Innovation & Best Practices: Define and promote best practices in system engineering, continuously improving internal processes and contributing to innovative solution development. Basic Qualifications: * Bachelor's degree in Engineering, Computer Science, or a related field. * 5+ years of experience in IT. * Knowledge of automotive engineering toolchains and hands-on experience with system engineering processes preferred. * Familiarity with industry standards and best practices is essential for driving innovation in our ICT-driven solutions. * Proven experience as an ICT Solution Architect, Business Analyst, Subject Matter Expert, or a similar role with project management experience in a complex system migration. * Good analytical abilities with a track record of identifying and resolving complex technical challenges, ensuring the reliability and efficiency of the software configuration and delivery lifecycle. * Ability to work effectively in a collaborative, team-oriented environment, with excellent communication and interpersonal skills to engage and influence clearly with stakeholders at all levels, both locally and globally.