Systems Engineer jobs at BWX Technologies - 73 jobs

**Roles and Responsibilities:** + Perform normal test set-up for production engines and complex test set-up for product improvement and engineering investigation. + Perform complete mechanical, electrical, and operational acceptance tests of a complicated nature on all engine models, including all standard and non-standard tests for engineering investigations, acceptance testing, and trouble-shooting and component endurance tests. + Install engine into test cell, all required instrumentation in or out of cell, and replacement parts as necessary. + Adjust engine controls and equipment; make all calculations necessary to comply with test requirements and adjustments to engine controls. + Use diagnostic equipment in trouble-shooting engine malfunctions, correct engine malfunctions, and provide sufficient technical information to other personnel if required, to assure a timely and effective solution to test related problems. + Inspect replacement of parts, accept, or reject engine in accordance with test results. + Diagnose and suggest corrective action on engine or components failing test. + May instruct student engineers on details of general test procedures; instruct lower rated personnel and maintain test records as required. + Maintain records and perform related duties. 2/1/88 Definition for this occupation is for identity only; it does not detail all operations performed or required. **MINIMUM EXPERIENCE: 2 years** + Has jet engine testing or varied jet engine assembly experience. + Must have a High School education or equivalent. DISPLACEMENT: Incumbents of this job have displacement rights to following jobs: + Development Mechanic, E4004, R21 + Production Assembly Mechanic, E4004, R19 + Heat Treat Services, E6603, R17 + Multi Services. E0601, R16 + Facilities Services, E0500, R13 _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Owns/influences budgets and operating plans. The role is guided by operating policy. Works with cross functional teams. The role has autonomy within the operational area or a segment within a larger business unit. The role may have a major impact on a small business unit or Family within a Function or P&L. High levels of evaluative judgment and operational acumen are required to achieve outcomes. **Job Description** **Roles and Responsibilities** + Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations.Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system. + Typically, a 2nd line manager with senior professional direct reports. Has the ability to attract and retain talent. Often manages medium to large teams. Developing expertise in own function. May include roles that are experts in their discipline, providing professional or thought leadership. Influences policy and ensures delivery within area of responsibility, linking with other parts of the organization. + Interprets internal and external business challenges and recommends best practices to improve products, processes or services. Utilizes understanding of industry trends to inform decision making process. + Leads others to find creative solutions within complex manufacturing processes with technical variety and/or interdependent production cycles. Employs sophisticated operational/product management, manufacturing or engineering techniques. Interaction with adjacent functions needed to solve issues. Has the ability to evaluate quality of information received and questions conflicting data for analysis. Uses multiple internal and external resources outside of own function to help arrive at a decision. + May lead functional teams or projects with moderate resource requirements, risk, and/or complexity. Presents business or technical discipline solutions to leaders. Communicates complex messages and negotiates mainly internally with others to adopt a different point of view. Influences peers to take action and may negotiate with external partners, vendors, or customers. **Required Qualifications** + Bachelor's degree in engineering from an accredited university or college + Minimum of 5 years of experience in systems engineering + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening **Desired Characteristics** + Strong oral and written communication skills. + Strong interpersonal and leadership skills. + Demonstrated ability to analyze and resolve problems. + Demonstrated ability to lead programs / projects. + Ability to document, plan, market, and execute programs. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Owns/influences budgets and operating plans. The role is guided by operating policy. Works with cross functional teams. The role has autonomy within the operational area or a segment within a larger business unit. The role may have a major impact on a small business unit or Family within a Function or P&L. High levels of evaluative judgment and operational acumen are required to achieve outcomes. Job Description Roles and Responsibilities * Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations. Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system. * Typically, a 2nd line manager with senior professional direct reports. Has the ability to attract and retain talent. Often manages medium to large teams. Developing expertise in own function. May include roles that are experts in their discipline, providing professional or thought leadership. Influences policy and ensures delivery within area of responsibility, linking with other parts of the organization. * Interprets internal and external business challenges and recommends best practices to improve products, processes or services. Utilizes understanding of industry trends to inform decision making process. * Leads others to find creative solutions within complex manufacturing processes with technical variety and/or interdependent production cycles. Employs sophisticated operational/product management, manufacturing or engineering techniques. Interaction with adjacent functions needed to solve issues. Has the ability to evaluate quality of information received and questions conflicting data for analysis. Uses multiple internal and external resources outside of own function to help arrive at a decision. * May lead functional teams or projects with moderate resource requirements, risk, and/or complexity. Presents business or technical discipline solutions to leaders. Communicates complex messages and negotiates mainly internally with others to adopt a different point of view. Influences peers to take action and may negotiate with external partners, vendors, or customers. Required Qualifications * Bachelor's degree in engineering from an accredited university or college * Minimum of 5 years of experience in systems engineering * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening Desired Characteristics * Strong oral and written communication skills. * Strong interpersonal and leadership skills. * Demonstrated ability to analyze and resolve problems. * Demonstrated ability to lead programs / projects. * Ability to document, plan, market, and execute programs. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryThe Technical Leader leads projects and initiatives with broad scope and high impact to the business or is a recognized expert in a specialized field. In this role you will be responsible for major and complex assignments with long-term business implications, manage complex issues within functional area(s) of expertise, and contribute to the overall business strategy The Technical Leader will, among other things, lead the execution of Systems Tech Review, coordinate with design specialist teams, interface with external customers and partners, and ensure designs and teams meet expected milestones and follow processes.Job Description Roles and Responsibilities: Provide technical leadership for a team of engineers for all product design aspects of the assigned system Assure all component designs meet requirements Support and coordinate with interfacing organizations such as manufacturing, sourcing, services, global engineering, ATO, and systems engineering Support service programs, fulfillment, and New Product Introduction (NPI) Provide strong guidance and contribution to DMP and design to cost projects Communicate progress to all levels of the organization Mentor and develop less experienced personnel Required Qualifications: Bachelor of Science in Engineering, Physics, Chemistry, Mathematics, or Computer Science Minimum of 8 years of engineering experience Desired Characteristics: Master's degree in Engineering Six Sigma training Strong mechanical design and analytical background Familiarity with manufacturing processes Ability to drive projects to completion Strong oral and written communication skills Strong interpersonal and leadership skills Ability to interface effectively with all levels of the organization and external customers This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryThe Engine Systems Integration Leader will provide leadership for initiatives with broad scope & high business impact. They will be a recognized expert in relevant disciplines and communicate across all disciplines. Responsibility includes requirements, guiding new product introduction, and leading implementation of solutions consistent with business & technical objectives. Owns/influences budgets and operating plans. The role is guided by operating policy. Works with cross functional teams. The role has autonomy within the operational area or a segment within a larger business unit. The role may have a major impact on a small business unit or Family within a Function or P&L. High levels of evaluative judgment and operational acumen are required to achieve outcomes.Job Description Roles and Responsibilities Provide technical and program management leadership in the integration across module disciplines with limited guidance. Develop collaborative system level solutions in concert with the Platform and Systems Integration Leaders Formulate and guide teams toward implementation plans to achieve technical requirements, schedules, and contract commitments. Provide leadership defining test plans that meet program objectives. Provide technical guidance to other personnel and assigned teams, mentor others in the organization. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Monitor and communicate project status, business issues and significant developments Lead or participate in organizational efforts in assigned projects and/or tasks Participate as a presenter or reviewer in technical and program reviews Provide leadership to help focus and integrate new technologies smoothly into NPI programs and production Stay cognizant of the GE Aerospace technology roadmap to determine how pipeline technologies can benefit the platform and communicate to the technology council what technologies will be needed to support a future product Support proposals Support the teams in modernizing design and systems engineering processes with lean tools. Lead system level reviews, analyses and initiatives Required Qualifications Bachelor's degree in engineering from an accredited university or college. 5 years of relevant experience in gas turbine engines This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Active “Advanced programs” access 10 years of relevant experience in gas turbine engines Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. Strong ability to work in a team environment with demonstrated leadership and customer interface skills. Demonstrated ability to lead by influence Strong interpersonal and leadership skills Strong oral and written communication skills At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. #LI-TR1 #securityclearance This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Engine Systems Integration Leader will provide leadership for initiatives with broad scope & high business impact. They will be a recognized expert in relevant disciplines and communicate across all disciplines. Responsibility includes requirements, guiding new product introduction, and leading implementation of solutions consistent with business & technical objectives. Owns/influences budgets and operating plans. The role is guided by operating policy. Works with cross functional teams. The role has autonomy within the operational area or a segment within a larger business unit. The role may have a major impact on a small business unit or Family within a Function or P&L. High levels of evaluative judgment and operational acumen are required to achieve outcomes. Job Description Roles and Responsibilities * Provide technical and program management leadership in the integration across module disciplines with limited guidance. * Develop collaborative system level solutions in concert with the Platform and Systems Integration Leaders * Formulate and guide teams toward implementation plans to achieve technical requirements, schedules, and contract commitments. * Provide leadership defining test plans that meet program objectives. * Provide technical guidance to other personnel and assigned teams, mentor others in the organization. * Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. * Monitor and communicate project status, business issues and significant developments * Lead or participate in organizational efforts in assigned projects and/or tasks * Participate as a presenter or reviewer in technical and program reviews * Provide leadership to help focus and integrate new technologies smoothly into NPI programs and production * Stay cognizant of the GE Aerospace technology roadmap to determine how pipeline technologies can benefit the platform and communicate to the technology council what technologies will be needed to support a future product * Support proposals * Support the teams in modernizing design and systems engineering processes with lean tools. * Lead system level reviews, analyses and initiatives Required Qualifications * Bachelor's degree in engineering from an accredited university or college. * 5 years of relevant experience in gas turbine engines * This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance. * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics * Active "Advanced programs" access * 10 years of relevant experience in gas turbine engines * Demonstrated ability to analyze and resolve problems. * Ability to document, plan, market, and execute programs. * Established project management skills. * Strong ability to work in a team environment with demonstrated leadership and customer interface skills. * Demonstrated ability to lead by influence * Strong interpersonal and leadership skills * Strong oral and written communication skills At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. #LI-TR1 #securityclearance This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Engine Systems Integration Leader will provide leadership for initiatives with broad scope & high business impact. They will be a recognized expert in relevant disciplines and communicate across all disciplines. Responsibility includes requirements, guiding new product introduction, and leading implementation of solutions consistent with business & technical objectives. Owns/influences budgets and operating plans. The role is guided by operating policy. Works with cross functional teams. The role has autonomy within the operational area or a segment within a larger business unit. The role may have a major impact on a small business unit or Family within a Function or P&L. High levels of evaluative judgment and operational acumen are required to achieve outcomes. **Job Description** **Roles and Responsibilities** + Provide technical and program management leadership in the integration across module disciplines with limited guidance. + Develop collaborative system level solutions in concert with the Platform and Systems Integration Leaders + Formulate and guide teams toward implementation plans to achieve technical requirements, schedules, and contract commitments. + Provide leadership defining test plans that meet program objectives. + Provide technical guidance to other personnel and assigned teams, mentor others in the organization. + Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. + Monitor and communicate project status, business issues and significant developments + Lead or participate in organizational efforts in assigned projects and/or tasks + Participate as a presenter or reviewer in technical and program reviews + Provide leadership to help focus and integrate new technologies smoothly into NPI programs and production + Stay cognizant of the GE Aerospace technology roadmap to determine how pipeline technologies can benefit the platform and communicate to the technology council what technologies will be needed to support a future product + Support proposals + Support the teams in modernizing design and systems engineering processes with lean tools. + Lead system level reviews, analyses and initiatives **Required Qualifications** + Bachelor's degree in engineering from an accredited university or college. + 5 years of relevant experience in gas turbine engines + This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance. + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** + Active "Advanced programs" access + 10 years of relevant experience in gas turbine engines + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, market, and execute programs. + Established project management skills. + Strong ability to work in a team environment with demonstrated leadership and customer interface skills. + Demonstrated ability to lead by influence + Strong interpersonal and leadership skills + Strong oral and written communication skills At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. \#LI-TR1 \#securityclearance _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Technical Leader leads projects and initiatives with broad scope and high impact to the business or is a recognized expert in a specialized field. In this role you will be responsible for major and complex assignments with long-term business implications, manage complex issues within functional area(s) of expertise, and contribute to the overall business strategy The Technical Leader will, among other things, lead the execution of Systems Tech Review, coordinate with design specialist teams, interface with external customers and partners, and ensure designs and teams meet expected milestones and follow processes. **Job Description** **Roles and Responsibilities:** + Provide technical leadership for a team of engineers for all product design aspects of the assigned system + Assure all component designs meet requirements + Support and coordinate with interfacing organizations such as manufacturing, sourcing, services, global engineering, ATO, and systems engineering + Support service programs, fulfillment, and New Product Introduction (NPI) + Provide strong guidance and contribution to DMP and design to cost projects + Communicate progress to all levels of the organization + Mentor and develop less experienced personnel **Required Qualifications:** + Bachelor of Science in Engineering, Physics, Chemistry, Mathematics, or Computer Science + Minimum of 8 years of engineering experience **Desired Characteristics:** + Master's degree in Engineering + Six Sigma training + Strong mechanical design and analytical background + Familiarity with manufacturing processes + Ability to drive projects to completion + Strong oral and written communication skills + Strong interpersonal and leadership skills + Ability to interface effectively with all levels of the organization and external customers _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryThe NGP3 Lead Systems Engineer - Program Control will report to the Senior Engineering Section Manager - Systems Program Control Engineering within Edison Works' Advanced Product Development (APD) Section. The APD section is responsible for executing NGP3, a large military engine development program. The team will progress an engine concept through design, development, vehicle integration, and testing. Technology upgrades will be introduced across all modules as necessary to meet challenging customer requirements. NGP3 Lead Systems Engineer - Program Control coordinates, prioritizes and plans program team activities to exceed internal and external customer expectations. This is done by delivering superior propulsion systems with excellent technical performance, on-time deliverables, and on-cost execution. The Program Control team oversees definition, execution and improvement of all program management processes, including FLIGHT DECK, Financial Forecasting, Earned Value Management (EVM), Integrated Master Scheduling (IMS), Line of Balance (LoB), Operating Review Bowlers, Product Control Board (PCB), Tech Review, Digital Tools, and CDRL/SDRL Fulfillment. The team also serves as program interface to the Military Engineering division in defining plans, assessing execution, advocating for resources and predicting future needs/performance. Program Control Systems Engineers tightly integrate with multiple Edison Works & GE SLT teams, including Engineering Division, the Project, Program Management Office, Finance, Mfg. Programs, Sourcing, Security, IT, IA, and Facilities. There is some autonomy within the role. Moderate levels of operational judgment are required to achieve outcomes required. Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.Job Description Roles and Responsibilities Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations. Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system. Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy. In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members Required Qualifications Bachelor's degree in engineering from an accredited university or college Minimum of 3 years of experience in systems engineering Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship Due to security requirements this position requires a full-time in the office schedule. This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance. Desired Characteristics Experience working with DoD customers and processes. Experience with financial and program management tools. Existing US Government Security Clearance Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. #LI-TR1 #securityclearance This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

The NGP3 Lead Systems Engineer - Program Control will report to the Senior Engineering Section Manager - Systems Program Control Engineering within Edison Works' Advanced Product Development (APD) Section. The APD section is responsible for executing NGP3, a large military engine development program. The team will progress an engine concept through design, development, vehicle integration, and testing. Technology upgrades will be introduced across all modules as necessary to meet challenging customer requirements. NGP3 Lead Systems Engineer - Program Control coordinates, prioritizes and plans program team activities to exceed internal and external customer expectations. This is done by delivering superior propulsion systems with excellent technical performance, on-time deliverables, and on-cost execution. The Program Control team oversees definition, execution and improvement of all program management processes, including FLIGHT DECK, Financial Forecasting, Earned Value Management (EVM), Integrated Master Scheduling (IMS), Line of Balance (LoB), Operating Review Bowlers, Product Control Board (PCB), Tech Review, Digital Tools, and CDRL/SDRL Fulfillment. The team also serves as program interface to the Military Engineering division in defining plans, assessing execution, advocating for resources and predicting future needs/performance. Program Control Systems Engineers tightly integrate with multiple Edison Works & GE SLT teams, including Engineering Division, the Project, Program Management Office, Finance, Mfg. Programs, Sourcing, Security, IT, IA, and Facilities. There is some autonomy within the role. Moderate levels of operational judgment are required to achieve outcomes required. Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance. **Job Description** **Roles and Responsibilities** + Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations.Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system. + Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy. + In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. + Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions. + A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members **Required Qualifications** + Bachelor's degree in engineering from an accredited university or college + Minimum of 3 years of experience in systems engineering + Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship + Due to security requirements this position requires a full-time in the office schedule. + This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance. **Desired Characteristics** + Experience working with DoD customers and processes. + Experience with financial and program management tools. + Existing US Government Security Clearance + Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. \#LI-TR1 \#securityclearance _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Ready to shape the future of professional tools? In this exciting new role as a Systems Engineer in Elyria, OH, you'll be responsible for shaping and guiding the mechanical and product-level system architecture across new product development (NPD) initiatives in partnership with category engineering teams. This is a hands-on technical leadership role that actively shapes early concepts, evaluates tradeoffs, and influences real design decisions. This role ensures our products are built on sound, scalable, reusable mechanical subsystems and interfaces that enable speed, consistency, cross-category integration, and high-quality outcomes. Working across product categories and with multidisciplinary engineering teams, you'll identify subsystem requirements, define mechanical interfaces, align cross-functional stakeholders, and establish strategies for subsystem reuse and design methodology standardization. You'll collaborate with the Electrical Systems Architect and other shared-service teams, most notably Industrial Design, to enable cohesive, user-centered, technically robust product architectures. Your impact will be immediate and lasting - helping deliver solutions pros trust! **In This Role, Your Responsibilities Will Be:** **System Architecture & Requirements Definition** + Define the initial, critical, and detailed mechanical system architecture for new products. + Establish system-level and subsystem-level mechanical requirements based on product-level requirements that guide design, integration, and verification. + Identify required subsystems (structural, thermal, motion, safety, packaging, sealing, etc.) and specify the performance and interface requirements for each. **Subsystem Strategy & Reuse** + Identify opportunities to leverage common mechanical subsystems, components, and design methodologies across product categories. + Lead efforts to develop and maintain reusable subsystem libraries, best-practice templates, and standard interface definitions. + Evaluate tradeoffs between bespoke design and platform reuse based on performance, cost, manufacturability, and NPD speed. **Cross-Functional Technical Collaboration** + Collaborate closely with the Electrical Systems Architect to develop holistic product-level technical architectures and ensure mechanical-electrical-software coherence. + Partner with Industrial Design to align mechanical architecture with user experience, ergonomics, form factor, aesthetic intent, and brand consistency. + Engage Manufacturing Engineering, Quality, Product Management, and Service to ensure mechanical architecture decisions are viable, scalable, and aligned with business needs. **NPD Process Enablement & Technical Leadership** + Work with Lead/Principal Engineers on category teams to ensure projects start with clear, intentional, and complete product requirements. + Facilitate architectural reviews focused on early alignment, risk identification, and integration readiness. + Provide early identification of technical risks and guide research, prototyping, or analysis activities needed to de-risk architectures in collaboration with the Lead Engineer. + Monitor mechanical architecture implementation across projects and ensure learnings feed continuous improvement. **Technology Evaluation & Innovation** + Evaluate emerging mechanical technologies, materials, and design approaches for potential application in future products. + Drive innovation in mechanical integration, miniaturization, motion systems, sealing strategies, structural solutions, and other domain-relevant areas. **Who You Are:** You create teamwork allowing others across the organization to achieve shared objectives. You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You evaluate pros and cons, risks and benefits of different solution options. You create competitive and breakthrough strategies that show a clear connection between vision and action. You encourage diverse thinking to promote and nurture innovation. **For This Role, You Will Need:** + Bachelor's degree in mechanical engineering or related field + 5+ years of experience in mechanical system design, systems engineering, or architecture roles + Experience developing complex electro-mechanical products **Preferred Qualifications That Set You Apart:** + Experience with consumer or industrial hardware NPD in multidisciplinary environments. + Experience defining mechanical system architectures or leading early-phase concept development. + Proficiency with CAD tools and simulation/analysis methods (FEA, thermal analysis, tolerance analysis). + Familiarity with DFMA, reliability engineering, and design controls. + Experience integrating mechanical designs with embedded electronics. **Our Culture & Commitment to You:** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. \#LI-BC3 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25030236 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Ready to shape the future of professional tools? In this exciting new role as a Systems Engineer in Elyria, OH, you'll be responsible for shaping and guiding the mechanical and product-level system architecture across new product development (NPD) initiatives in partnership with category engineering teams. This is a hands-on technical leadership role that actively shapes early concepts, evaluates tradeoffs, and influences real design decisions. This role ensures our products are built on sound, scalable, reusable mechanical subsystems and interfaces that enable speed, consistency, cross-category integration, and high-quality outcomes. Working across product categories and with multidisciplinary engineering teams, you'll identify subsystem requirements, define mechanical interfaces, align cross-functional stakeholders, and establish strategies for subsystem reuse and design methodology standardization. You'll collaborate with the Electrical Systems Architect and other shared-service teams, most notably Industrial Design, to enable cohesive, user-centered, technically robust product architectures. Your impact will be immediate and lasting - helping deliver solutions pros trust! In This Role, Your Responsibilities Will Be: System Architecture & Requirements Definition Define the initial, critical, and detailed mechanical system architecture for new products. Establish system-level and subsystem-level mechanical requirements based on product-level requirements that guide design, integration, and verification. Identify required subsystems (structural, thermal, motion, safety, packaging, sealing, etc.) and specify the performance and interface requirements for each. Subsystem Strategy & Reuse Identify opportunities to leverage common mechanical subsystems, components, and design methodologies across product categories. Lead efforts to develop and maintain reusable subsystem libraries, best-practice templates, and standard interface definitions. Evaluate tradeoffs between bespoke design and platform reuse based on performance, cost, manufacturability, and NPD speed. Cross-Functional Technical Collaboration Collaborate closely with the Electrical Systems Architect to develop holistic product-level technical architectures and ensure mechanical-electrical-software coherence. Partner with Industrial Design to align mechanical architecture with user experience, ergonomics, form factor, aesthetic intent, and brand consistency. Engage Manufacturing Engineering, Quality, Product Management, and Service to ensure mechanical architecture decisions are viable, scalable, and aligned with business needs. NPD Process Enablement & Technical Leadership Work with Lead/Principal Engineers on category teams to ensure projects start with clear, intentional, and complete product requirements. Facilitate architectural reviews focused on early alignment, risk identification, and integration readiness. Provide early identification of technical risks and guide research, prototyping, or analysis activities needed to de-risk architectures in collaboration with the Lead Engineer. Monitor mechanical architecture implementation across projects and ensure learnings feed continuous improvement. Technology Evaluation & Innovation Evaluate emerging mechanical technologies, materials, and design approaches for potential application in future products. Drive innovation in mechanical integration, miniaturization, motion systems, sealing strategies, structural solutions, and other domain-relevant areas. Who You Are: You create teamwork allowing others across the organization to achieve shared objectives. You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. You evaluate pros and cons, risks and benefits of different solution options. You create competitive and breakthrough strategies that show a clear connection between vision and action. You encourage diverse thinking to promote and nurture innovation. For This Role, You Will Need: Bachelor's degree in mechanical engineering or related field 5+ years of experience in mechanical system design, systems engineering, or architecture roles Experience developing complex electro-mechanical products Preferred Qualifications That Set You Apart: Experience with consumer or industrial hardware NPD in multidisciplinary environments. Experience defining mechanical system architectures or leading early-phase concept development. Proficiency with CAD tools and simulation/analysis methods (FEA, thermal analysis, tolerance analysis). Familiarity with DFMA, reliability engineering, and design controls. Experience integrating mechanical designs with embedded electronics. Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. #LI-BC3

SummaryAre you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world! Activities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.Job Description Roles and Responsibilities Provide onsite supplier support for delivery, engineering, and quality execution. Activities would include on time delivery support, scheduling and capacity assistance, supporting design change requests, tooling design, and quality activities to include first article inspection and non-conformance generation and disposition. This work would include mechanical and/or electrical engineering for all products. Develop in-depth knowledge of technical disciplines to support these activities through training and field experience. Use prior experience and acquired technical expertise to execute policy/strategy. Work with the integrated delivery team to address specific KPI's as determined by various Advanced Programs Ops managers. Will need to work closely with the Integrated Project Team to support these processes, and must be able to work independently as on site support for that team Effectively communicate identified opportunities and challenges to the IPT and senior leadership as required Required Qualifications Bachelor's degree in engineering from an accredited university or college Minimum of 3 years of experience in design engineering This role requires the successful candidate to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship Ability to travel 50% of the time Desired Characteristics Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SummaryEdison Works, the military business unit of GE Aerospace, is on the front line of developing advanced technology to support our nation's defense. If you enjoy a technology-rich environment and developing the next generation of aviation products, this role is for you! The Next Generation Products team is responsible for Edison Works premier New Product Introduction (NPI), and this role is for a Systems engineer with a focus on product qualification & airworthiness.Job Description Roles and Responsibilities Develop the definition, support the creation, & deliver qualification & airworthiness artifacts, including technical reports, testing results, & the Propulsion System Integrity Plan (PSIP) Support the management of requirement specification documents, change processes, and communication to the Engineering teams. Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Provide technical leadership to personnel supporting the assigned project. Document technical data generated by the assigned project consistent with engineering policies and procedures Provide timely communications on significant issues or developments Participate on teams assigned to address organizational initiatives and generic issues. Participate as a presenter or reviewer in technical and program reviews. Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the market Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions. Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field. Required Qualifications Bachelor's Degree in Mechanical or Aeronautical Engineering (or a similar discipline focused on mechanical design or aerothermal sciences) from an accredited college or university Minimum of 6 years of experience in an engineering position. This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance Desired Characteristics Engineering experience in certification, qualification, or airworthiness domains Engineering experience in GE Aerospace systems integration or similar systems engineering role Experience in engine certification or qualification Strong technical aptitude, including applicable engineering tools and systems Strong oral and written communication skills as well as interpersonal and leadership skills High level of computer proficiency Master's Degree in Mechanical or Aeronautical Engineering related to turbomachinery design, testing, or systems engineering Talented, highly motivated with good engineering judgment Effective in contributing in a structured, cross functional team work environment This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Edison Works, the military business unit of GE Aerospace, is on the front line of developing advanced technology to support our nation's defense. If you enjoy a technology-rich environment and developing the next generation of aviation products, this role is for you! The Next Generation Products team is responsible for Edison Works premier New Product Introduction (NPI), and this role is for a Systems engineer with a focus on product qualification & airworthiness. **Job Description** **Roles and Responsibilities** + Develop the definition, support the creation, & deliver qualification & airworthiness artifacts, including technical reports, testing results, & the Propulsion System Integrity Plan (PSIP) + Support the management of requirement specification documents, change processes, and communication to the Engineering teams. + Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. + Provide technical leadership to personnel supporting the assigned project. + Document technical data generated by the assigned project consistent with engineering policies and procedures + Provide timely communications on significant issues or developments + Participate on teams assigned to address organizational initiatives and generic issues. + Participate as a presenter or reviewer in technical and program reviews. + Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the market + Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. + Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions. + Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field. **Required Qualifications** + Bachelor's Degree in Mechanical or Aeronautical Engineering (or a similar discipline focused on mechanical design or aerothermal sciences) from an accredited college or university + Minimum of 6 years of experience in an engineering position. + This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance **Desired Characteristics** + Engineering experience in certification, qualification, or airworthiness domains + Engineering experience in GE Aerospace systems integration or similar systems engineering role + Experience in engine certification or qualification + Strong technical aptitude, including applicable engineering tools and systems + Strong oral and written communication skills as well as interpersonal and leadership skills + High level of computer proficiency + Master's Degree in Mechanical or Aeronautical Engineering related to turbomachinery design, testing, or systems engineering + Talented, highly motivated with good engineering judgment + Effective in contributing in a structured, cross functional team work environment _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Edison Works, the military business unit of GE Aerospace, is on the front line of developing advanced technology to support our nation's defense. If you enjoy a technology-rich environment and developing the next generation of aviation products, this role is for you! The Next Generation Products team is responsible for Edison Works premier New Product Introduction (NPI), and this role is for a Systems Engineer focused on improving product cost & rate of production. **Job Description** **Roles and Responsibilities** + Responsible for coordination between engineering and supply chain to meet program cost and delivery requirements. + Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. + Solves challenging technical and delivery issues and proactively applies learnings across product lines. + Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. + Provide technical leadership to personnel supporting the assigned project. + Document technical data generated by the assigned project consistent with engineering policies and procedures + Provide timely communications on significant issues or developments + Participate on teams assigned to address organizational initiatives and generic issues. + Participate as a presenter or reviewer in technical and program reviews. + Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the market + Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. + Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions. + Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field. **Required Qualifications** + Bachelor's Degree in Mechanical or Aeronautical Engineering (or a similar discipline focused on mechanical design or aerothermal sciences) from an accredited college or university + Minimum of 6 years of experience in an engineering position. + This role requires the successful candidate to maintain a US Government Security Clearance; prerequisite for a security clearance is U.S. Citizenship. Preference will be given to candidates who currently hold US Government Security Clearance **Desired Characteristics** + Engineering experience with the design, manufacture, & assembly of complex hardware + Engineering experience in GE Aerospace systems integration or similar systems engineering role + Experience in engine certification or qualification + Strong technical aptitude, including applicable engineering tools and systems + Strong oral and written communication skills as well as interpersonal and leadership skills + High level of computer proficiency + Master's Degree in Mechanical or Aeronautical Engineering related to turbomachinery design, testing, or systems engineering + Talented, highly motivated with good engineering judgment + Effective in contributing in a structured, cross functional team work environment _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryThe Advanced Programs Systems Engineering and Flight Test team is responsible for the design, development, vehicle integration, and testing of military and derivative commercial gas turbines, integrated propulsion, power, and thermal management systems, as well as leading breakthrough military technology programs. As a Systems Test Staff Engineer, you will plan, execute integrated system and engine tests that validate propulsion, power, and thermal management performance across development phases. You will define test strategies and requirements, develop test methods and instrumentation plans, author procedures, and ensure safe, compliant test execution. You will lead cross-functional coordination with design, analytics, controls, and integration teams to translate requirements into testable configurations, resolve anomalies, and drive root-cause and corrective actions. You will synthesize test data into clear technical findings, verification evidence, and customer-ready reports, while managing configuration control, risk, and schedule to meet program Safety, Quality, Delivery, and Cost objectives. You will also mentor junior engineers, contribute to test capability improvements, and support field/flight test readiness.Job Description Roles and Responsibilities: The Staff Engineer for the Advanced Programs Systems Engineering team will demonstrate accountability for functional, business, and broad company objectives, particularly as related to multiple advanced programs for future military aircraft systems. In this role you will assist with engine integration studies, technology demonstrator tests, and customer support. Key Responsibilities: Manage scope, schedules, coordination, and execution of advanced programs Coordinate with customer on technical and installation requirements Manage interface control documents with the customer. Lead cross functional teams in the execution of programs Lead and provide key technical direction on projects with critical business impact Assure technical quality excellence, timely completion of work and reviews, appropriate use of resources, and responsiveness to customer / program needs Respond to request for proposals and request for information from external customers Facilitate communication of technical and business information between organizations and within the work group Effectively communicate and provide recommendations through the analysis and presentation of technical data to internal and external GE customers Communicate with management on technical, financial and programmatic issues. Ensure proper documentation of technical efforts Required Qualifications: Bachelor degree in Engineering from accredited university or college Minimum of 8 years of experience in engineering and/or technical program management role. Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Knowledge of engine qualification procedures and requirements Experience working with DoD customer and processes Experience working early engine development and integration programs Demonstrated ability to document, plan, market, and manage programs that further the knowledge, understanding and capability of the business Experience with the DoD acquisition process Strong communication skills Demonstrated experience working with and presenting to customers Multiple years of engine test and/or instrumentation experience Knowledge of GE test facilities and strong internal network within Test Services Engineering. Active US Department of Defense Security Clearance. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Advanced Programs Systems Engineering and Flight Test team is responsible for the design, development, vehicle integration, and testing of military and derivative commercial gas turbines, integrated propulsion, power, and thermal management systems, as well as leading breakthrough military technology programs. As a Systems Test Staff Engineer, you will plan, execute integrated system and engine tests that validate propulsion, power, and thermal management performance across development phases. You will define test strategies and requirements, develop test methods and instrumentation plans, author procedures, and ensure safe, compliant test execution. You will lead cross-functional coordination with design, analytics, controls, and integration teams to translate requirements into testable configurations, resolve anomalies, and drive root-cause and corrective actions. You will synthesize test data into clear technical findings, verification evidence, and customer-ready reports, while managing configuration control, risk, and schedule to meet program Safety, Quality, Delivery, and Cost objectives. You will also mentor junior engineers, contribute to test capability improvements, and support field/flight test readiness. **Job Description** **Roles and Responsibilities:** The Staff Engineer for the Advanced Programs Systems Engineering team will demonstrate accountability for functional, business, and broad company objectives, particularly as related to multiple advanced programs for future military aircraft systems. In this role you will assist with engine integration studies, technology demonstrator tests, and customer support. **Key Responsibilities:** + Manage scope, schedules, coordination, and execution of advanced programs + Coordinate with customer on technical and installation requirements + Manage interface control documents with the customer. + Lead cross functional teams in the execution of programs + Lead and provide key technical direction on projects with critical business impact + Assure technical quality excellence, timely completion of work and reviews, appropriate use of resources, and responsiveness to customer / program needs + Respond to request for proposals and request for information from external customers + Facilitate communication of technical and business information between organizations and within the work group + Effectively communicate and provide recommendations through the analysis and presentation of technical data to internal and external GE customers + Communicate with management on technical, financial and programmatic issues. + Ensure proper documentation of technical efforts **Required Qualifications:** + Bachelor degree in Engineering from accredited university or college + Minimum of 8 years of experience in engineering and/or technical program management role. + Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship. + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. **Desired Characteristics** + Knowledge of engine qualification procedures and requirements + Experience working with DoD customer and processes + Experience working early engine development and integration programs + Demonstrated ability to document, plan, market, and manage programs that further the knowledge, understanding and capability of the business + Experience with the DoD acquisition process + Strong communication skills + Demonstrated experience working with and presenting to customers + Multiple years of engine test and/or instrumentation experience + Knowledge of GE test facilities and strong internal network within Test Services Engineering. + Active US Department of Defense Security Clearance. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SummaryAre you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen.Job Description Job Summary: Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op! At GE Aerospace, safety and quality are our top priorities, and you'll be part of a team that upholds these values while working on challenging, real-world problems to design aircraft engines for commercial and military applications & support through service life. You'll build professional and technical skills in an engineering role, with access to mentorship and training programs. Develop relationships with other interns and leaders while preparing for a potential full-time position after graduation, either through one of our fantastic leadership programs or direct hire opportunities. An Aerospace Engineering Engines Computer and Software Engineering intern/co-op may experience work in an area such as the development of engine controls; gas turbine engine sensors; electrical power systems; vehicle health & data management systems; data collection and computing systems; real-time data analytics; embedded controls; engine test systems and integration. Responsibilities may include design, analysis, testing, writing software requirements, software testing, simulation, tool development, and product/program support. Ultimately, you'll be placed taking your preferences into account while also considering your major, year of schooling, and business needs at the time of placement. Qualifications/Requirements: Minimum 3.0 cumulative GPA off a 4.0 scale without rounding. Attending a full time matriculated and nationally accredited baccalaureate or graduate program in computer engineering, computer science, software engineering, or another related major. Willingness and ability to work in the United States; primarily locations are Cincinnati, OH or Lynn, MA. Reliable transportation, many of our sites do not have public transportation available. Graduation date on or after July 2027. Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics: Due to the nature of the work, upperclassmen are preferred Engineering aptitude and passion for aviation technology An analytical approach to problem solving Strong knowledge of computer and Microsoft products Proficiency in at least one programming language Willingness and ability to learn from others Demonstrated leadership and team player Excellent interpersonal skills One who strives for academic excellence and shows great initiative Ability to be agile as business needs change and shift frequently Desire to work in a fast-paced ever-changing environment Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes