Calspan jobs in Newport News, VA - 12633 jobs

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: Define and develop RF system architectures for radar and advanced sensing applications. Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. Conduct trade studies and system optimization to balance performance, cost, and schedule. Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. Perform root cause analysis of system performance issues and recommend design changes. Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. Demonstrated experience deriving and validating system-level RF budgets. Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: Experience in phased-array architectures and beamforming. Knowledge of military/aerospace standards and environmental testing. Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task-oriented senior professional to manage all day-to-day maintenance aspects of this fixed route and paratransit bus operation. The Fleet Maintenance Manager will ensure that all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for the maintenance program. Qualifications: Talent Requirements: The Maintenance Manager shall have a minimum of five (5) years of experience in managing the maintenance of a heavy-duty bus or truck fleet; two (2) years of experience in maintaining and/or managing the maintenance of vehicles in a fixed route and paratransit fleet. Must possess in-depth knowledge of mechanical maintenance and repair methods and practices, strong knowledge of diesel, CNG and electric vehicle systems, and proficiency with maintenance management software. The qualified candidate will have operational and working knowledge of compressed natural gas fueling systems and demonstrated experience through training and work experience maintenance of major components and vehicle systems (e.g., transmissions, HVAC systems, air systems,11 compressed natural gas (CNG) engines, gasoline engines, CNG fuel tank inspection procedures, and maintenance of electric transit coaches, etc.). The Maintenance Manager shall have experience in supervising the work of other maintenance personnel, ranging from mechanics, parts clerks, fueler/washers, etc.. Previous passenger transportation in the current project or a similar environment preferred. Must be able to manage and interface with the client. Must have the ability to track and control parts inventories, vendors and suppliers. Must be able to properly prioritize, implement and manage work schedules, projects, and assignments. Must be able to manage the financial/accounting aspects of a fleet maintenance operation. Must be able to communicate effectively with all levels of staff in written and oral formats. Must have computer skills, including word processing, spreadsheets and Microsoft outlook. ASE or manufacturer's certifications a plus. Solid knowledge of managing audits, PM schedules. Manager shall be the equivalent of a journeyman mechanic; have an Associate degree or equivalent from a college or accredited technical school. Must display initiative, professionalism, candor and tact at all times. Starting salary range: $120,000 - $140,000 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Master Electrician Shift: 3rd (11pm-7am) Pay: $44- $50.22/hr Position Summary: Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. How you will impact WestRock: Utilize electrical/mechanical skills to maintain machinery Contribute to a collaborative safety culture that drives results Provide rapid response to ensure seamless productivity. What you need to succeed: 2-3 years in trouble shooting industrial electrical control systems down to component level An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems. A good understanding of hydraulic and pneumatic systems. Able to install and set up both A/C and D/C drives PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude. Must be able to read and interpret both electrical and mechanical drawings. Working knowledge of power transmission equipment and bearings. Basic welding skills preferred but not required. Familiar with pumps, both air and electric. Able to install and trouble shoot basic 3 phase motor control circuits Some knowledge of the various types of sensors and limit switches Familiar with computers and Microsoft software. Strong written and verbal communication skills. Ability to work independently in a mature and professional manner. Ability to work flexible hours, overtime High school diploma or equivalent Military training and or Technical School preferred What we offer: Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage. Corporate culture based on integrity, respect, accountability, and excellence Comprehensive training with numerous learning and development opportunities A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work. The starting range is $44/hr - $50.22h r, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 1/19/26. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

The Rental Sales Representative is responsible for acting as the front line sales agent for the rental of vehicles to the Company's current lease and commercial rental accounts, as well as potential commercial rental customers and consumer household needs. This requires the Rental Representative to work cross functionally across Sales, Marketing, Operations and Asset Management while utilizing excellent customer communication skills. Essential Functions Sales & Marketing:Handle sales and sales process for inbound calls as well as outbound solicitation Responsible for executing the business unit's marketing plan Maintain current accurate data within the company's marketing database Maximize rate opportunities within the market place Responsible for generating rental, lease and used vehicle sales leads Maintain and expand relationships with existing customer base Ability to maximize operational effectiveness by coordinating overall inventory levels to meet customer demand Meet overall Ryder market share by successfully executing the sales and marketing initiatives Operations & Asset Management:Responsible for the overall profitably, operations and asset management of a rental location Accountable for coordinating with Maintenance, Asset Management, Sales, and Marketing to ensure customer satisfaction Maintain compliance with company, local, state, federal and other regulatory agencies Complete understanding of marketplace conditions in order to maximize utilization of the rental fleet Customer:Drive profitable revenue growth by maintaining and growing customer relationships Responsible for overall satisfaction for all internal and external customers Reconcile all customer concerns, issues, and disputes in order to maintain the ongoing relationship Communication:Builds constructive and effective relationships with both internal and external customers Maintain composure when addressing stressful situations Clearly articulates Ryder's product and service offerings Additional Responsibilities On a voluntary basis as well as based on scheduling, the Rental Sales Representative will be required to perform the role of On-Call Representative based on work schedules as determined by Supervisor. Performs other duties as assigned. Skills and Abilities Strong verbal and written communication skills Ability to get both verbal and written communication across that has the desired effect Goal oriented, drive for results, assertive, and deal well with ambiguity Possesses a high degree of initiative Must have high level of energy and be a self-motivated and self-directed person Ability to manage multiple assignments and tasks, set priorities, and adapt to changing conditions and work assignments Ability to focus on multiple projects and activities simultaneously Flexibility to operate and self-driven to excel in a fast-paced environment Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors) Demonstrates customer service skills Qualifications H.S. diploma/GED required One (1) year or more sales experience required DOT Regulated: No Job Category: Sales Support Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate's relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Hourly Minimum Pay Range: 22.00 Maximum Pay Range: 25.00 Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through ********************* . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at ***************** or ************. Current Employees : If you are a current employee at Ryder, please click here (*************************************************** to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (********************************************** . \#wd

The Rental Sales Representative is responsible for acting as the front line sales agent for the rental of vehicles to the Company's current lease and commercial rental accounts, as well as potential commercial rental customers and consumer household needs. This requires the Rental Representative to work cross functionally across Sales, Marketing, Operations and Asset Management while utilizing excellent customer communication skills. Essential Functions Sales & Marketing:Handle sales and sales process for inbound calls as well as outbound solicitation Responsible for executing the business unit's marketing plan Maintain current accurate data within the company's marketing database Maximize rate opportunities within the market place Responsible for generating rental, lease and used vehicle sales leads Maintain and expand relationships with existing customer base Ability to maximize operational effectiveness by coordinating overall inventory levels to meet customer demand Meet overall Ryder market share by successfully executing the sales and marketing initiatives Operations & Asset Management:Responsible for the overall profitably, operations and asset management of a rental location Accountable for coordinating with Maintenance, Asset Management, Sales, and Marketing to ensure customer satisfaction Maintain compliance with company, local, state, federal and other regulatory agencies Complete understanding of marketplace conditions in order to maximize utilization of the rental fleet Customer:Drive profitable revenue growth by maintaining and growing customer relationships Responsible for overall satisfaction for all internal and external customers Reconcile all customer concerns, issues, and disputes in order to maintain the ongoing relationship Communication:Builds constructive and effective relationships with both internal and external customers Maintain composure when addressing stressful situations Clearly articulates Ryder's product and service offerings Additional Responsibilities On a voluntary basis as well as based on scheduling, the Rental Sales Representative will be required to perform the role of On-Call Representative based on work schedules as determined by Supervisor. Performs other duties as assigned. Skills and Abilities Strong verbal and written communication skills Ability to get both verbal and written communication across that has the desired effect Goal oriented, drive for results, assertive, and deal well with ambiguity Possesses a high degree of initiative Must have high level of energy and be a self-motivated and self-directed person Ability to manage multiple assignments and tasks, set priorities, and adapt to changing conditions and work assignments Ability to focus on multiple projects and activities simultaneously Flexibility to operate and self-driven to excel in a fast-paced environment Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors) Demonstrates customer service skills Qualifications H.S. diploma/GED required One (1) year or more sales experience required DOT Regulated: No Job Category: Sales Support Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate's relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Hourly Minimum Pay Range: $20 Maximum Pay Range: $20 Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through ********************* . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at ***************** or ************. Current Employees : If you are a current employee at Ryder, please click here (*************************************************** to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (********************************************** . \#wd

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Transit General Manager who will provide support, leadership and direction to assigned operating location to ensure delivery of annual business plans. He/she will control the daily operation of our transportation contract, in compliance with the policies of the contracting agency and in conformance with company procedures. Job Responsibilities: Effectively manage customer relations through both direct contact and outreach programs. Identify, select, train and mentor location staff. Effectively and frequently communicate with location staff and support team members. Oversee vehicle maintenance plan and ensures fleet availability to meet service requirements. Oversee safety and training programs, plans and processes to ensure compliance with company, contract and regulatory requirements. Maintain client contact routinely to meet or exceed expectations. Conduct periodic departmental audits. Daily, weekly and monthly review of key operational metrics. Ensure that all location financial metrics are managed continuously, exceptions are reported and action plans are developed to ensure the location meets it financial, safety and operational expectations. Implement, promote and adhere to company policies and procedures. Interact with bridges committee to effectuate positive changes to policies, procedures and programs. Participate in location(s) labor and employee relations activities. Provide insight and information to support location(s) contract renewals. Create and present location(s) annual budget. Qualifications: Talent Requirements: College degree or equivalent business management experience. Fixed Route Transit Management experience required. Must have a minimum of (5) five years of comprehensive experience in Transit operations management and a combination of (7) seven years of management or supervisory experience in a transit environment with knowledge of scheduling software. Must have labor/union(s) negations/expenses expertise. Must have a full understanding of dispatch, scheduling, driver recruitment, and safety DOT and FTA compliance. MS Office, strong analytical skills, strong written and verbal communication skills and high degree of multi-tasking skills. Additional duties/responsibilities based upon individual contract requirements. Salary range: $160k-205K/annually based on experience MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #AppCAST

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The opportunity: • Support the operation of a fast-paced packaging manufacturing facility. Must be able to conduct, maintain, test and repair electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. Must be able to apply knowledge of electrical/mechanical principles in determining equipment malfunctions and restore in all areas of Manufacturing. • Primary duties include the install, start up and shut down of equipment in accordance with company safety procedures for machine activation and shutdown in line with OSHA requirements; inform appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved and maintain company-required performance and maintenance records for identified equipment. The job also includes performing preventative maintenance functions as directed, assist maintenance personnel with technical troubleshooting and to perform other duties as required. • The ideal candidate will have a strong commitment to working safely and demonstrate the ability to work in a fast-paced environment, possess a strong desire to learn the maintenance of complex machinery, and have a desire to advance within the company. This is a 2nd Shift position - 3p - 11p How you will impact WestRock: • Ensure internal and external customers get the quality, consistency, and responsiveness they deserve • Embrace the WestRock culture, based on values of integrity, respect, accountability, and excellence What you need to succeed: • Ability to maintain various manufacturing equipment, follow specific directions, and perform other duties as assigned • Ability to work safely, maintain a clean and safe work environment, and comply with all safety regulations • A thorough knowledge of electrical components and equipment including the use of special instruments for diagnostic purposes • Computer experience/operation and PLC programming • Flexibility to work any shift and overtime as required • High school diploma or equivalent required; Electrical background, Military training and/or technical school preferred • Offer contingent on passing background check, pre-employment physical and drug screen What we offer: • Corporate culture based on integrity, respect, accountability and excellence • Comprehensive training with numerous learning and development opportunities • An attractive salary reflecting skills, competencies and potential; the range for this position is $28.53 - $40.22 an hour with an attractive benefits package plus $0.50 shift differential for 2nd shift • A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work #NY #militaryjobs The starting range is $28.53-$40.22/hr, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 60 working days , and 10 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 1/19/26. #WorkWithSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Immediately hiring a Permanent Full Time Entry Level Diesel Technician to support our Truck Fleet at Ryder in Farmingdale, New York Call Nick or text "Farm2" to ************ Hear it from a Ryder Technician Employee Here: *********************************************** Hourly Pay: $34.25 per hour Certification Bonus of $100 for each New ASE Certification Obtained up to $700 Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year Schedule: Monday - Friday Hours: First Shift 6:00am - 2:30pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles Call Nick or text "Farm2" to ************ Apply Here with Ryder Today No Experience Needed On the Job Paid Training PPE AND UNIFORMS Issued TOOL and BOOT ALLOWANCE provided State of the Art Equipment Safety is Always the First Priority Call Nick or text "Farm2" to ************ Click Here to See All Ryder Careers:************************************************ We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work, required Two (2) years or more of a combination of classroom training and work experience in required experience, preferred Valid Commercial Driver License (CDL) CLASS A,preferred This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Must be able to obtain CDL within 6 months after hire Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Performs vehicle maintenance and repair duties Performs standard vehicle maintenance Performs standard component inspections and repairs Performs preventive maintenance Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable Identifies root cause of basic failures/conditions and perform repairs as required Replaces defective components as instructed Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task Utilizes key functions of Shop Management System and electronic documentation available Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT) Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 3 weeks ago (12/10/2025 4:25 PM) Requisition ID 2025-192627 Location (Posting Location) : State/Province NY Location (Posting Location) : City FARMINGDALE Location (Posting Location) : Postal Code 11735 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $34.15/Hr. Max Pay USD $34.15/Hr.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: A National Transit Database (NTD) Data Manager is responsible for ensuring the accuracy, integrity, and timely submission of data required for the monthly and annual reports for the Federal Transit Administration (FTA). This includes managing the collection, verification, analysis, and reporting on financial, operating, safety, and asset information according to federal guidelines. Data collection and management Oversee the data collection process from various departments, such as operations, finance, safety, and maintenance. Develop, implement, and maintain procedures for effective and accurate data collection and management. Serve as the primary subject matter expert and agency liaison for NTD reporting. Conduct regular quality control and validation procedures on all data before it is submitted. Reporting and compliance Compile and submit monthly and annual reports, including financial, operating, safety, maintenance, and asset data. Ensure all reporting adheres to federal requirements, including NTD, Americans with Disabilities Act (ADA), and other FTA regulations. Act as the primary contact during the FTA review process and work with agency staff to resolve any issues. Analysis and strategy Analyze agency performance data to identify trends and recommend opportunities for process improvement. Develop performance metrics and dashboards for leadership to track and analyze key indicators. Assist in strategic planning efforts by using NTD data and analysis to inform decision-making. Stay informed of new and changing FTA regulatory and reporting requirements to ensure ongoing compliance. Technology and systems Oversee the use of transit technology systems for data capture, such as GPS tracking, automated fare collection, and maintenance software. Collaborate with IT to maintain and optimize databases and data management tools used for reporting. Support the integration of reporting platforms to streamline the consolidation of data from different departments. Qualifications: Education and experience High School Diploma or equivalent Two (2) years of experience in data management, financial reporting, or a similar applied accounting role. Experience with federal funding and grant reporting requirements is often preferred. Skills and abilities Analytical skills: Strong ability to analyze data, identify issues, and develop appropriate solutions. Technical proficiency: Advanced skills in spreadsheet applications (e.g., Microsoft Excel), database management, and reporting software. Communication: Excellent verbal and written communication skills to effectively liaise with agency staff and federal representatives. Organizational skills: Strong ability to manage complex data, track multiple deadlines, and maintain meticulous records. Leadership: The ability to provide guidance to other staff members involved in the data collection and reporting processes. Starting salary range: $70,354 - $78,171 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Saab, Inc. is seeking experienced Field Service Representatives with technical background and experience in operating, maintaining, troubleshooting, and/or repairing Radars, Air and Missile Defense, Command and Control (C2), or other advanced weapons systems. This hands-on role requires extensive short-notice travel, with some assignments lasting more than two months. Candidates must be able to work effectively in demanding operational environments, both independently and as part of a team. The ideal candidate possesses strong technical problem-solving skills, a desire to help others, and comfort training customers in both formal and on-the-job settings. Experience in a Military Occupational Specialty (MOS) or Air Force Specialty Code (AFSC) supporting advanced weapons systems such as: 14X, 1CX, 1D7, 1Z3, 2171, 2848, 2887, Electronics Technician or Fire Controlman. This position offers the opportunity to work with cutting-edge defense technologies and contribute directly to mission success. Responsibilities include: Diagnosing, troubleshooting, repairing, and debugging complex systems utilizing manuals, schematics, and reach back support for various electro/mechanical issues that may arise. Troubleshooting and resolving complex issues independently or in collaboration with others. Reporting design, reliability, and maintenance problems or bugs to design and software engineering teams. Serving as the primary interface with customers while on site. Supporting other company functional areas such as customer installation and training. Delivering training to customers on the operation and maintenance of Saab products. Compensation Range: $70,200 - $87,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: High School Diploma, or BA/BS degree in an engineering discipline is preferred. 2+ years of experience in a related field OR 4+ years of relevant military service as an Air Defense or Battle Management system operator/maintainer. Must hold, or have previously held, a U.S. DoD SECRET Clearance. Must be capable of lifting and removing/replacing components weighing up to 50 pounds. Desired Qualifications: Experience operating, maintaining, troubleshooting and/or repairing complex weapon and/or command and control components. Ability to perform preventive and corrective maintenance actions in accordance with established procedures. Ability to identify, develop, and execute system troubleshooting or maintenance actions that go beyond the scope of written procedures. Strong problem-solving and analytical skills applied to diagnosing and repairing radar components, hardware, and operating systems. Proficiency with common diagnostic test equipment, including digital multimeters (DMM) and oscilloscopes. Recognizes performance degradation and provides actionable recommendations to restore or enhance system efficiency. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance-and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work-quickly and reliably. Key Responsibilities: Rapidly assess existing antenna and array designs for performance gaps against requirements. Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. Recommend and implement design modifications for immediate performance improvements. Perform accelerated free-space radiation pattern measurements and compare results against simulations. Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. Support urgent production and field troubleshooting, including on-site technical interventions when required. Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field (Master's or PhD preferred). 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. Proven ability to mitigate mutual coupling in dense or phased-array configurations. Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: Experience with low-observable and conformal antenna designs. Familiarity with wideband, multiband, and frequency-agile antenna systems. Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. The Opportunity: Smurfit Westrock Solvay Mill is seeking Team Support Technician (Entry Level Operations Position) at Solvay NY. This position is entry level, and the right candidate will be taught skills needed to be successful. The goal of this role is to grow with the organization and become a technical expert in paper making. Pay Range: $23.02/hour and after probationary period $26.49/hour How you will impact Smurfit Westrock: Knows and follows all safety, warehouse, and ISO policies/procedures Inspects trailers for damage - inside/outside, prior to loading finished rolls of paper Places jack stands and chocks in appropriate positions on parked trailers Sweeps out railcars and trailers thoroughly Makes sure packing material (dunnage) is available to keep rolls of paper in position while traveling Makes sure finished paper rolls have correct placement and tightness of shipping bands to secure roll for traveling Reviews customs and shipping paperwork Outbound scaling / controlling dock activity (live loads, drop loads) Communicates with spotters at beginning of each shift on what trailers are needed Back-up scale admin for each shift Corrects hold tags and reassigns rolls Assists with physical inventory Secures railcar and trailer loads Enters drop loads into CMS Helps with the paper machines during unplanned downtime Starch unloading Utilizes various computer programs Conducts proper shift relief What you need to succeed: High school diploma or equivalent and previous work experience. Ability to successfully train and advance in the pay-for-skills environment. Safety and quality-conscious work habits. Above average written and verbal communication skills. Effective interpersonal and team skills. Must be computer literate with good understanding of Microsoft products and email. Ability to climb stairs, lift 40 pounds unaided, read, respond to Mill signs & information systems, hear/respond to Mill paging systems, alarm, and warning systems Tolerance for heat/humidity (summer months) & cold (winter months) environments What we offer: Corporate culture based on Integrity, Respect, Accountability and Excellence Comprehensive training with numerous learning and development opportunities An attractive salary reflecting skills, competencies and potential A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work The starting rate is $23.02 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 11/03/25. #CareersAtSmurfitWestrock Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Imagine a career that truly takes you places, where you get to travel and meet new people every day along the journey. For 100 years, our Greyhound Drivers have been the heart and soul of our company, serving the transportation needs of communities across the nation. Do you enjoy meeting new people and have a passion for safety and the customer experience? Interested in a job that pays you to travel? Come join us in serving America's passengers as we continue our legacy of putting the wheels in motion. Responsibilities: Operate a bus in a safe and efficient manner, adhering to traffic laws and safety regulations Follow designated routes and schedules, making necessary adjustments when required Ensure the safety and comfort of passengers by providing assistance when needed and maintaining a clean bus Perform pre-trip and post-trip inspections to ensure the bus is in good working condition Maintain a clean and orderly bus, including regular cleaning of the interior and exterior Report any maintenance issues, accidents, or incidents to the appropriate authorities Assist passengers with boarding, exiting, and securing their personal belongings Follow emergency procedures and respond to incidents in accordance with company protocols Keep records of miles driven, fuel usage, and other required documentation Stay updated on company policies and safety procedures Qualifications: Fully Licensed with Class A or B Commercial Driver's License (CDL) Possesses Passenger 16+ endorsement and no air brake restriction 22 years of age or older Able to pass a DOT physical and pre-employment drug screen Full-time employment consideration only Ability to work varied schedule based on regional driver needs Benefits Medical, Dental, and Vision Plans 401K with company-matched contributions Life Insurance Paid Vacation, Holidays, and Sick Days Free Travel Passes Annual Uniform Allowance Driver Union membership & representation Career Advancement Opportunities Compensation Range: USD $29.40 - USD $31.28 /Hr.

The Rental Sales Representative is responsible for acting as the front line sales agent for the rental of vehicles to the Company's current lease and commercial rental accounts, as well as potential commercial rental customers and consumer household needs. This requires the Rental Representative to work cross functionally across Sales, Marketing, Operations and Asset Management while utilizing excellent customer communication skills. Essential Functions Sales & Marketing:Handle sales and sales process for inbound calls as well as outbound solicitation Responsible for executing the business unit's marketing plan Maintain current accurate data within the company's marketing database Maximize rate opportunities within the market place Responsible for generating rental, lease and used vehicle sales leads Maintain and expand relationships with existing customer base Ability to maximize operational effectiveness by coordinating overall inventory levels to meet customer demand Meet overall Ryder market share by successfully executing the sales and marketing initiatives Operations & Asset Management:Responsible for the overall profitably, operations and asset management of a rental location Accountable for coordinating with Maintenance, Asset Management, Sales, and Marketing to ensure customer satisfaction Maintain compliance with company, local, state, federal and other regulatory agencies Complete understanding of marketplace conditions in order to maximize utilization of the rental fleet Customer:Drive profitable revenue growth by maintaining and growing customer relationships Responsible for overall satisfaction for all internal and external customers Reconcile all customer concerns, issues, and disputes in order to maintain the ongoing relationship Communication:Builds constructive and effective relationships with both internal and external customers Maintain composure when addressing stressful situations Clearly articulates Ryder's product and service offerings Additional Responsibilities On a voluntary basis as well as based on scheduling, the Rental Sales Representative will be required to perform the role of On-Call Representative based on work schedules as determined by Supervisor. Performs other duties as assigned. Skills and Abilities Strong verbal and written communication skills Ability to get both verbal and written communication across that has the desired effect Goal oriented, drive for results, assertive, and deal well with ambiguity Possesses a high degree of initiative Must have high level of energy and be a self-motivated and self-directed person Ability to manage multiple assignments and tasks, set priorities, and adapt to changing conditions and work assignments Ability to focus on multiple projects and activities simultaneously Flexibility to operate and self-driven to excel in a fast-paced environment Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors) Demonstrates customer service skills Qualifications H.S. diploma/GED required One (1) year or more sales experience required DOT Regulated: No Job Category: Sales Support Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate's relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Hourly Minimum Pay Range: 22.00 Maximum Pay Range: 26.00 Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through ********************* . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at ***************** or ************. Current Employees : If you are a current employee at Ryder, please click here (*************************************************** to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (********************************************** . \#wd

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking an "A" Level Lead Mechanic/Technician who will perform preventive maintenance inspections on various types of vehicles. He/she will manage a fleet of 56 vehicles, assign work to other Technicians, purchase parts, and process paperwork. The position requires the Technician, must be able to teach, to diagnose, inspect, and change or repair defective coach components, sub-components, and systems on vehicles as time permits, more complex repair techniques. The A Lead Technician must possess a CDL license with airbrakes and a passenger endorsement, a 609 and 608 air conditioning certifications and at least H or T series ASE certifications. This position will report to the General Manager. Duties include, but are not limited to the following: Assign, monitor, and review daily work orders to ensure timely completion of scheduled and unscheduled repairs. Perform advanced diagnostics and repairs on engines, transmissions, electrical systems, HVAC, CNG systems, and other major vehicle components. Lead, coach, and train mechanics of all levels (A/B/C) to maintain high standards of workmanship and safety. Support the Maintenance Manager in planning preventive maintenance schedules and tracking vehicle availability. Inspect and sign off on completed repairs to ensure adherence to company, city, and CHP standards. Maintain communication between maintenance, dispatch, and operations to minimize vehicle downtime. Assist with warranty claims, vendor coordination, and parts inventory oversight. Promote safety awareness by enforcing PPE use, lockout/tagout procedures, and general shop safety compliance. Conduct or assist in root cause analysis of repeat defects, road calls, and failed inspections. Support preparation of vehicles for CHP, TRC, and City audits. Serve as acting supervisor in the absence of the Maintenance Manager. Coordinate between mechanics and utility personnel to ensure vehicle readiness and smooth daily yard operations. Qualifications: Talent Requirements: High School diploma or equivalent. Effectively use and operate the tools and equipment required for the repair and maintenance of large vehicles. Understand the theory, operation, and repair of diesel and CNG powered vehicles, including engines, transmissions, ignitions, and electrical hydraulic/pneumatic cooling, heating, and brake systems. Learn and follow industrial and shop safety rules. Read and interpret technical manuals and schematics. Learn and effectively use personal computers and the company's software programs for inventory and parts. Read maps and locate road-called vehicles. Communicate effectively both orally and in writing. Understand and follow oral and written instructions. Work independently under continual training and close supervision. Establish and maintain effective working relationships with those contacted in the course of work using principles of good customer service. Combination of at least one (1) to two (2) years of journeyman level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Additional Requirements: Must be able to pass a pre-employment drug screen and random drug testing. Have taken basic automotive or heavy duty repair courses or have good understanding of basic automotive/heavy duty systems. Have journeyman level tools. Must be a least 23 years of age. Must possess, or obtain and maintain a valid Class A or B Commercial Driver License with Air Brake and Passenger Endorsements, and a medical certificate by date of appointment. Work well with others. Must be able to work a varied schedule. Willing to learn. Available for training. Able to lift up to 70 lbs Starting pay range: $41 - $43/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized p Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

Responsibilities: MV Transportation is seeking an experienced Transit General Manager who will provide support, leadership and direction to assigned operating location to ensure delivery of annual business plans. He/she will control the daily operation of our transportation contract, in compliance with the policies of the contracting agency and in conformance with company procedures. Job Responsibilities: Effectively manage customer relations through both direct contact and outreach programs. Identify, select, train and mentor location staff. Effectively and frequently communicate with location staff and support team members. Oversee vehicle maintenance plan and ensures fleet availability to meet service requirements. Oversee safety and training programs, plans and processes to ensure compliance with company, contract and regulatory requirements. Maintain client contact routinely to meet or exceed expectations. Conduct periodic departmental audits. Daily, weekly and monthly review of key operational metrics. Ensure that all location financial metrics are managed continuously, exceptions are reported and action plans are developed to ensure the location meets it financial, safety and operational expectations. Implement, promote and adhere to company policies and procedures. Interact with bridges committee to effectuate positive changes to policies, procedures and programs. Participate in location(s) labor and employee relations activities. Provide insight and information to support location(s) contract renewals. Create and present location(s) annual budget. Qualifications: Talent Requirements: College degree or equivalent business management experience. Transit Management experience required. Must have a minimum of (5) five years of comprehensive experience in Transit operations management and a combination of (7) seven years of management or supervisory experience in a Fixed Route or Shuttle bus environment with knowledge of routing/scheduling software. Must have labor/union(s) negations/expenses expertise. Must have a full understanding of dispatch, scheduling, driver recruitment, and safety DOT and FTA compliance. MS Office, strong analytical skills, strong written and verbal communication skills and high degree of multi-tasking skills. Additional duties/responsibilities based upon individual contract requirements. Starting Salary Range: $175,000 - $197,000 During the course of employment, employees may receive and have access to confidential information. All employees are expected to respect and maintain the confidentiality of non-public customer and business records and any other information that MV classifies as confidential. MV Transportation is committed to as policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #APPCAST

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits?! Would you like to work with a company that invests in your growth? Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are: As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary. What's in it for YOU: Competitive Pay Rates! 40 hours a week, not flat rate OT as needed over 40 hours Full Benefits: Medical, Vision, Dental, and 401K plan Paid vacation Company provided uniform Corporate partner discount program Career advancement through a national company Duties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components. Perform scheduled preventative maintenance of vehicles Execute major and minor repairs of defective components. Document all activities in MV's Fleet Management System. Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements: High school diploma or equivalent. Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program. Must be able to pass a pre-employment drug screen and random drug testing. MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. Conduct RF system-level analysis, link budget calculations, and trade-off studies. Select and integrate components such as mixers, amplifiers, oscillators, and filters. Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. Conduct laboratory testing, tuning, and validation of RF modules against specifications. Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. Support troubleshooting and root cause analysis for performance anomalies. Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Qualifications: Bachelor's degree in Electrical Engineering, RF Engineering, or related field. 5-8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. Experience with PCB design for RF and microwave circuits. Familiarity with military or aerospace standards for RF systems is a plus. US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: Knowledge of phased-array radar architectures. Electronics packaging concepts Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Supervisor to supervise the maintenance operation during their shift. This includes preventative maintenance and repair of a large fleet of buses and sedans, supervision of all maintenance staff during their assigned shift, assurance that all contractual requirements are achieved, supervision of the maintenance program and reports as well as tracking work orders and filling appropriately. The Fleet Maintenance Supervisor will work under the Fleet Maintenance Manager in the running of the day-to-day business. Qualified candidates must have technical competence with light/medium-duty vehicle repair and preventive maintenance. Must be available to work overnight. Job Responsibilities: Coordinate with the Maintenance Manager, other Maintenance Supervisors, and assigned Maintenance Leads to schedule and/or resume vehicle maintenance on assigned shift. Maintains close communications with Operations, to respond to road calls in a timely manner. Dispatch mechanics, and schedule repairs in an expedient manner. Reviews work orders for accuracy and ensure production schedules are met. With prioritization, safety, quality, and efficiency foremost, the MS estimates productivity times and establishes or adjusts shift employees' production schedules. Conduct pre-shift meeting with employees to communicate, prioritize, assign, adjust and interpret for vehicle inspection, servicing, repairing, and cleaning. Supervise Maintenance Department employees and productivity to ensure accurate and timely completion of job assignments and cleanup activities with follow-up inspection. Clearly communicates staff expectation in an effective and consistent manner. Responsible for the monitoring and recording of employee work time and attendance, in coordination with the Maintenance Manager, review, approve and schedule employee time off balancing the need for overtime usage. Train and direct employees on shift in all phases of service and repair of vehicles including but not limited to, basic repairs, air conditioning, electrical, major component rebuild and/or vehicle cleaning operations. Consistently and fairly, initiates where necessary, documents and recommends appropriate written and verbal disciplinary action and commendations. Analyze and assist in the resolution of work-related problems and diagnosis of malfunctions with machinery and equipment during shift. Generate, as requested, input and track work orders delegated to staff in the Fleet Focus Maintenance Management System. Updates the daily, weekly, and monthly reports. Assist in the development, monitoring, communicating, interpreting, and enforcing compliance of administrative and department policies, operating procedures, uniform, safety compliance, regulatory standards, clean-up procedures and quality control processes to ensure efficient daily operations and workflow. Responsible for retrieving, issuing, and logging parts and supplies required for use by shift employees. Qualifications: Talent Requirements: High School diploma or equivalent. Five (5) to ten (10) years of experience or training in repair and preventive maintenance of fleet equipment. At least five (5) years of supervisory experience or any combination of training and experience. ASE certified to meet job classification. If not certified, must be willing to get certified. Prior supervisory or lead experience--crews of six (6) or more. Computer skills including word processing, spreadsheets, and MS Outlook. Must possess a California Motor Vehicle Inspection License. Must have a valid California driver's license. Starting Pay Rate: $75,000 - $91,137.49 MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment. #appcast