Cameron LNG jobs

Primary Purpose: The Process Safety Specialist supports the implementation and sustainment of the site's Process Safety Management (PSM) program, structured around seven core elements: Leadership, Process Hazard Analysis (PHA), Management of Change (MOC), Learning from Experience, Safe Work Practices, Mechanical Integrity, and Operating Practices. This role ensures consistent program execution, documentation accuracy, and field verification of safeguards, contributing to compliance with applicable OSHA, FERC, and PHMSA regulations. Working closely with Operations, Maintenance, and Engineering, the Specialist helps drive process safety ownership and continuous improvement across the LNG facility. This position is located in Hackberry, LA. Employee's primary residence must be located within a one-hour drive from the Hackberry plant site. This measure will assure that response time for callouts is kept to a minimum, which increases the safety of our employees in an unexpected or emergent situation. Transportation Worker Identification Credentials (TWIC) is required. Responsibilities: Support the execution of PSM goals, KPIs, and performance improvement initiatives defined by the HSSE Leadership Team. Maintain PSM documentation, dashboards, and action tracking within Enablon or an equivalent system to ensure traceability and visibility of progress. Assist with PSM awareness training, communications, and engagement activities that reinforce a process safety culture. Coordinate and support PHA and LOPA workshops; maintain up-to-date documentation, recommendations, and close-out tracking. Ensure PHA actions are integrated into the site's risk register and properly documented in Enablon. Conduct field verifications to confirm safeguards and assumptions remain valid. Review MOC packages for completeness and technical accuracy; assist departments with documenting justifications, risk assessments, and required approvals. Participate in Pre-Startup Safety Reviews (PSSR) and verify that safeguards, procedures, and training requirements are complete before startup. Monitor MOC closure timelines and provide performance reports. Support and participate in incident investigations and Root Cause Analysis (RCA) sessions. Document and track corrective actions, ensuring timely completion and communication of lessons learned. Contribute to the development of learning bulletins and integration of lessons into procedures and PHAs. Conduct or participate in field-level verifications of permit-to-work systems, isolation procedures, confined space entries, and hot work controls. Validate that safe work practices align with PSM and risk control expectations. Identify improvement opportunities for procedural clarity and field compliance. Support mechanical integrity program activities. Verify that critical equipment, instrumentation, and protective systems (e.g., relief valves, ESDs, SIFs) maintain required functionality and documentation. Assist in developing and updating operating procedures and job aids. Support operating discipline through field audits, operator interviews, and compliance checks. Facilitate the rollout of revised procedures and ensure training completion is captured in Enablon. Monitor and report PSM Key Performance Indicators (KPIs) to support leadership visibility and continuous improvement. Provide data analysis and summaries for audits, management reviews, and regulatory inspections. Identify gaps or trends and propose risk-based recommendations to improve PSM program maturity. Performs other duties as assigned. Qualifications: Education: Bachelor's degree in engineering, safety, or a related technical field. Experience: 3+ years of relevant experience in process safety or operations in an LNG, petrochemical, refining, or chemical processing facility. Familiarity with PSM regulatory frameworks (OSHA 29 CFR 1910.119, FERC, PHMSA) and their application in an LNG environment. Demonstrated ability to interpret P&IDs, PFDs, and engineering documents. Excellent written and verbal communication skills. Experience using digital compliance management systems (e.g., Enablon, PHA-Pro, or equivalent). Skills/ Knowledge/ Abilities: Experience using digital compliance management systems (e.g., Enablon, PHA-Pro, or equivalent). Understanding of mechanical integrity principles, including fixed equipment inspection, rotating equipment reliability, and protective device testing. Ability to conduct and document field walkdowns, verify installed safeguards, and validate compliance with MOC, PSSR, and action item closures. Strong technical writing and documentation skills, capable of developing procedures, job aids, and summary reports with clarity and regulatory rigor. Effective communication and collaboration skills, with the ability to engage cross-functional teams including Operations, Engineering, Maintenance, and HSE personnel. Detail-oriented with strong organizational skills, capable of managing multiple priorities and maintaining auditable records. Computer skills including, MS Office Suite (Word, Excel, Access, PowerPoint, MS Project, Visio, Adobe Acrobat Professional), SharePoint, etc. The candidate should have a working knowledge of industry and government standards. High level of HSSE knowledge. Strong written, verbal and interpersonal communication skills with the ability to be diplomatic and persuasive. Ability to communicate fluently in English. Organized and able to manage multiple activities timely and with a high degree of accuracy. Self-starter with ability to work strategically with minimal direction. Driven to meet and exceed performance parameters and work deadlines. Strong attention to details. Able to prioritize and execute tasks in a high-pressure environment. Able to remain calm and effective in emergencies. Understands and deals comfortably with a sense of urgency. Demonstrates high ethical standards for honesty, truthfulness and integrity. Ability to maintain confidential information and materials. Ability to interface with a culturally diverse range of personnel with varying disciplines, backgrounds, and experience levels. Ability to establish and maintain effective working relationships with terminal facility employees, vendors, and suppliers. Possesses the personality and ability to relate to and to establish a mutually respectful relationship with 1) management, 2) peers and 3) the various facility level workers whom are all responsible for ensuring good operations. Physical Requirements: Must be able to stand, walk, climb, run, sit, kneel, twist, bend, pull, push, carry, lift, reach overhead and drive. Most activities involve movement of either the upper and lower body extremities or both and the joints associated with these areas of the body. Must be able to enter confined spaces. Must be able to walk on uneven surfaces and climb stairs and ladders that ranges from 4 ft to 200 ft. Must be able to lift equipment needed to perform work. Must be able to wear safety equipment and other protective equipment as needed to perform job. When outdoors, this classification is exposed to extremes of heat, cold, loud noise and dust. Must be able to sit at a desk and operate a computer for extended periods of time. Must be willing to be on call, work outside of normal business hours as required and handle emergency response responsibilities. Must be able and willing to travel for trainings and/or meetings as required. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy.

Apply now Product Line Manager (PLM) Sustainability At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Achieve ~50% auditing utilization within the assigned portfolio; act as Lead/qualified auditor as needed. * Oversee the audit team: onboarding/sourcing, maintaining auditor appointments, and coordinating pre-/post-audit activities with the Operations Manager. * Monitor auditor performance and rejection rates; implement corrective actions, coaching, calibration, and training. * Provide technical training; enhance knowledge management tools with the Training Team and Certification Office. * Own the product portfolio roadmap in the Americas; translate market/customer needs into concrete measures aligned to the global strategy. * Ensure compliance with accreditation/product requirements for the region; support timely product revisions and certification rule adherence. * Coordinate go-to-market with Sales/Marketing; represent TÜV SÜD at associations, trade fairs, and committees; plan rollouts and scaling with BU MSA, PCOM, and Innovation. Your Qualifications * 3rd-party Lead Auditor qualification under APSCA or an equivalent sustainability program (must-have). * 5+ years conducting 3rd-party certification audits for a management systems certification body, including complex multi-site engagements. * 3+ years managing direct reports; proven auditor coaching, calibration, and performance management. * Expert knowledge of audit principles/practices and relevant management system standards & normative documents within the assigned product line. * Practical knowledge of certification-body processes and certification rules; adept with audit management systems and Microsoft Office. * Excellent communication and presentation skills across client levels; strong stakeholder management. * High integrity, strong work ethic, and a collaborative team mindset. What We Offer * Impact and ownership within a recognized global TIC brand. * Collaboration with global stakeholders (BU MSA, PCOM, Innovation) and exposure to industry forums. * Professional development and structured auditor/leadership training pathways. * Inclusive, safety-focused workplace and mission-driven culture. * Competitive compensation and benefits aligned to local market (insert salary token if required by law in SF). Additional Information * Work model (on-site/hybrid/remote) and location to be defined with the hiring team. * Travel is required for client audits, calibration/training, and industry events; frequency varies by portfolio and region. * Employment type and start date per local conditions; visa/work authorization requirements apply where relevant. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now Certification Body Management System Engineer At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Administer core management system programs for the USA Certification Body and Central Certification Body: internal audits, corrective actions (CAPA), document control, complaints, and appeals. * Coordinate ANAB witness and office audits (scheduling, logistics, evidence readiness) and track remediation actions. * Monitor hub KPIs and performance reporting; escalate trends and drive corrective/preventive actions with stakeholders. * Maintain controlled documentation and records in line with certification body rules and accreditation requirements. * Support cross-functional process improvements and projects assigned by Central Certification Body leadership. * Partner with internal teams to standardize workflows and ensure timely, high-quality submissions to accreditation bodies. * Provide clear status updates, summaries, and dashboards for management review. Your Qualifications * High school diploma or equivalent; 2+ years of work experience (quality, compliance, or certification support preferred). * Familiarity with certification body activities and management system auditing (internal or external) is a plus. * Proficient with Microsoft Word and Excel; comfortable with databases/trackers and document control tools. * Strong organization and follow-through; able to manage tasks/projects independently and meet deadlines. * Effective written, verbal, and presentation skills; confident interfacing with internal and external stakeholders. * Demonstrated initiative and problem solving; able to interpret procedures and propose improvements. * Team-oriented with solid interpersonal skills and sound decision-making. What We Offer * Impactful role supporting the integrity of TÜV SÜD's certification programs and accreditations. * Remote work model with collaboration across the USA Certification Body and Central Certification Body. * Opportunities to learn accreditation frameworks and grow in quality/compliance disciplines. * Access to tools, templates, and training that strengthen documentation and audit readiness. * Inclusive culture grounded in safety, integrity, and continuous improvement. Additional Information * Workplace model: Remote. * Travel: Some domestic travel up to 10%; occasional international travel with advance notice. * Work environment: Office/computer-based; frequent communication via phone/Teams/email; occasional lifting up to 35 lbs. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now Field Evaluation Engineer At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Conduct field labeling evaluations in accordance with TÜV SÜD program requirements and interpret/apply applicable test standards. * Schedule and execute assigned evaluations at client sites, ensuring timely and professional completion. * Establish and maintain professional relationships with customers, acting as a key point of contact. * Demonstrate knowledge of US regulatory standards and code requirements (e.g., ANSI/NFPA/UL standards). * Liaise with other staff to ensure consistency and accuracy of methods and interpretations. * Participate in and promote process improvements and the development of new product test requirements and strategies. * Provide travel and expense cost estimates as requested. * Report and track defects found during testing; record test data, technical information, and generate/revise test documents and reports (SOPs, datasheets, methods, etc.). * Review pre-evaluation documents to understand assignment objectives prior to service start. Your Qualifications * Bachelor's degree in electrical or mechanical engineering, or equivalent technical education and directly related experience. * Minimum 2 years of inspection and test experience evaluating products in accordance with ANSI/NFPA/UL standards. * Experience with NEC NFPA 70 and US standards (e.g., NFPA 79, UL508A, UL61010-1, UL61800-5-1, UL2202, ANSI/RIA R15.06, UL 1740); prior work in electrical code inspections is a plus. * Ability to travel frequently to US client sites (75%-90% travel). * Strong analytical, problem-solving, and troubleshooting skills. * Excellent verbal, written, and active listening skills; solid technical writing and interpersonal skills. * Strong engineering knowledge and understanding of testing requirements, manufacturing processes, drawings, and standards. * Ability to organize, prioritize, and perform multiple tasks while meeting or exceeding deadlines. What We Offer * Opportunity to work with a global leader in testing, inspection, and certification. * Collaborative and inclusive work environment. * Professional development and training opportunities. * Exposure to a wide range of client projects and industries. * Competitive compensation and benefits package. * Flexible remote work arrangements. * Commitment to employee well-being and safety. Additional Information * This is a remote, work-from-home position with significant travel in the northeastern United States. * Reasonable accommodations available for individuals with disabilities. * All employees are expected to support a safe and healthy work environment and adhere to TÜV SÜD policies and procedures. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now Aerospace Lead Auditor 1 At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Conduct third-party certification audits for AS9100/AS9120 standards in line with accreditation and internal requirements. * Plan, prepare, and deliver audits (on-site and remote), including opening/closing meetings, audit execution, and audit reporting. * Ensure compliance with aerospace quality management standards, industry regulations, and IAQG requirements. * Provide clear, timely, and accurate audit reports, maintaining professional communication with clients. * Collaborate with technical and certification teams to support audit scheduling, technical review, and certification decisions. * Stay current with aerospace quality standards and contribute to continuous improvement and impartiality in certification activities. Your Qualifications * Bachelor's degree in Engineering, Quality, Aerospace, or a related technical field (or equivalent experience). * At least 4-5 years of professional experience in the aerospace, aviation, or defense industry. * Proven experience conducting AS9100 and/or AS9120 third-party audits under an accredited certification body. * Current Aerospace Auditor certification through an approved scheme (AA, AEA, or equivalent with OASIS recognition). * Strong knowledge of ISO 9001, AS9100, AS9120, and related management system requirements. * Excellent communication skills in English, both written and spoken. * Strong analytical, organizational, and interpersonal skills with a willingness to travel frequently. What We Offer * Competitive annual salary of $100,000-$120,000. * Comprehensive benefits package including health, dental, vision, and retirement plan. * Paid time off and company holidays. * Continuous training and professional development opportunities. * Opportunity to work with a global leader in certification and assurance services. Additional Information * Location: United States (Remote with travel required). * Employment Type: Full-time, permanent position. * Onboarding and training programs are provided to support your success. * You don't meet every requirement? No problem - we encourage you to apply if this role excites you. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Primary Purpose: This position is located in Hackberry, LA. Employees' primary residence must be located within a one-hour drive from the Hackberry plant site. This measure will assure that response time for callouts is kept to a minimum, which increases the safety of our employees in an unexpected or emergent situation. Transportation Worker Identification Credentials (TWIC) is required. Responsibilities/Duties: Performs fixed, fired, marine, and rotating equipment maintenance activities Solves maintenance, and reliability problems as it relates to maintaining the plant equipment, via repairs, modifications, or replacements of equipment Performs preventive maintenance activities Interfaces with supervisor, operations, and engineering, or other departments as needed to ensure safe, reliable, and cost-effective maintenance and facility operation. Provides and records feedback for maintenance records Participates in emergency response activities as job and situation dictate to protect life and property Performs other duties as assigned Qualifications: Education: Minimum of a high school diploma or GED Technical degree and/or an equivalent combination of education and experience Experience: Employee with 4-5 years of Maintenance Experience or 8-10 years of Construction Experience. Millwright experience required. Experience on Static and Rotating equipment maintenance Experience in heavy industrial, petrochemical, or refining preferred Experience in liquefied natural gas or natural gas processing preferred Experience in workshop repairs Skills/ Knowledge/ Abilities: Have good computer skills Possesses strong communication, work ethic and technical skills Able to work with a culturally diverse group of technical individuals whose skills cover the range required to engineer, operate and maintain the LNG facilities Able to read and interpret technical drawings and equipment manuals Experienced in piping systems including flange alignment and bolt-up procedures Knowledgeable in mechanical seals, bearings, and alignment procedures Physical Requirements: Must be able to stand, walk, climb, run, sit, kneel, twist, bend, pull, push, carry, lift, reach overhead and drive. Most activities involve movement of either the upper and lower body extremities or both and the joints associated with these areas of the body. Must be able to enter confined spaces. Must be able to climb stairs and ladders that ranges from 4 ft to 200 ft. Must be able to lift equipment needed to perform work. Must be able to wear safety equipment such as safety harness, respirator and other protective equipment as needed to perform job. Must be willing to be on call, work overtime as required and handle emergency response responsibilities. Must be willing to travel for trainings as required. DOT Requirements: The U.S Department of Transportation (DOT) and the company have adopted regulations governing the control of drug use by persons in certain job classifications. This position is subject to the Federal Pipelines Regulation; and is stipulated in the 49 Code of Federal Regulations (CFR) part 40 that requires drug and alcohol testing and must meet the testing standards. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy.

Apply now Forest Analyst At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Support forest carbon project verification, including site visits in North America and internationally, project modeling analysis, documentation audits, and verification report completion. * Conduct on-site inventory audits, including forest mensuration, harvest/silvicultural method analysis, and boundary verification. * Analyze and audit carbon quantification data, including growth and yield modeling, and evaluate modeling software (e.g., USFS FVS, CBM-CFS3, Remsoft Woodstock). * Perform GIS analysis and cartography, ensuring conformance to forest carbon protocols; utilize online/mobile GIS tools for field data collection. * Build and maintain professional relationships with clients, agencies, and stakeholders; represent the company effectively and professionally. * Stay current on technical and regulatory issues related to forest carbon programs through active participation in industry groups. * Ensure a safe work environment by following and promoting company safety policies and participating in safety programs. Your Qualifications * Bachelor's degree in Forestry or a closely related field (required). * Minimum 5 years of experience in forestry or a related field. * Experience in forest carbon project development, validation/verification, or registry/regulatory oversight (preferred). * High proficiency in forest inventory measurements, sampling protocols, and the use of ESRI GIS software. * Strong skills in Microsoft Excel, database management (e.g., Access, R), and spatial data analysis. * Valid driver's license and clear driving record. * Ability to work safely and effectively in remote, rugged terrain and adverse weather conditions. * Excellent written and oral communication skills. * Professional Forester credential or SAF Certified Forester, or ability to obtain within 1 year (preferred). * Ability to attain forestry verifier credentials with relevant registries within 1 year of hire (preferred). What We Offer * Flexible remote work model. * Opportunities for professional development and certification. * Collaborative and inclusive team environment. * Exposure to innovative forest carbon and sustainability projects. * Support for safety and well-being, including comprehensive safety programs. * Opportunities for travel to diverse project locations. * Commitment to diversity, equity, and inclusion in the workplace. Additional Information * This position may require travel to remote locations, including use of specialized vehicles (e.g., float planes, ATVs). * Physical activities may include walking, hiking, or standing for extended periods in challenging terrain and weather. * The role is exempt and may require occasional lifting/moving of up to 50 pounds. * We welcome applications from people of all backgrounds, experiences, and perspectives. You don't meet every single requirement? No problem - we encourage you to apply if this role excites you. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Primary Purpose:

Apply now Jr Auditor At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Support audit planning, preparation, and documentation for ISO 9001 and related standards. * Participate in audits as an observer or technical assistant under qualified Lead Auditors. * Conduct document and record reviews to verify conformance with client management systems. * Assist in report drafting and follow-up on audit findings. * Maintain knowledge of ISO 9001 requirements and quality management concepts. * Complete TÜV SÜD internal training and qualification modules as part of the development path. * Collaborate with cross-functional audit and certification teams to ensure timely project delivery. * Support clients and internal stakeholders through professional communication and service excellence. Your Qualifications * Bachelor's degree in Engineering, Quality, Industrial, or related field. * Minimum 2 years of experience in quality management, manufacturing, or process improvement. * Basic understanding of ISO 9001 principles and the PDCA approach. * Strong analytical and communication skills (verbal and written). * Proficiency with Microsoft Office and familiarity with audit or quality tools. * Fluent in English; Spanish or Portuguese is a plus. * Willingness to travel across the U.S. and internationally as needed. Preferred: * Experience participating in internal or supplier audits. * Exposure to additional standards such as ISO 14001 or ISO 45001. * Training or coursework in quality management, auditing, or process control. What We Offer * Structured Auditor Development Program including formal ISO 9001 Lead Auditor training (IRCA or Exemplar Global recognized). * Mentored audit participation and progressive responsibility assignments. * Technical and soft-skill development under TÜV SÜD's certification framework. * Opportunity to qualify as a Lead Auditor for ISO 9001 within 2-3 years based on performance and experience. * Be part of a trusted global organization committed to quality, safety, and sustainability. * Hybrid work arrangements and professional development through TÜV SÜD Academy. Additional Information We welcome applications from people of all backgrounds, experiences, and perspectives. Work permit for the U.S. is required. Travel up to 40-60% Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now Product Line Manager (PLM) Sustainability At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Achieve ~50% auditing utilization within the assigned portfolio; act as Lead/qualified auditor as needed. * Oversee the audit team: onboarding/sourcing, maintaining auditor appointments, and coordinating pre-/post-audit activities with the Operations Manager. * Monitor auditor performance and rejection rates; implement corrective actions, coaching, calibration, and training. * Provide technical training; enhance knowledge management tools with the Training Team and Certification Office. * Own the product portfolio roadmap in the Americas; translate market/customer needs into concrete measures aligned to the global strategy. * Ensure compliance with accreditation/product requirements for the region; support timely product revisions and certification rule adherence. * Coordinate go-to-market with Sales/Marketing; represent TÜV SÜD at associations, trade fairs, and committees; plan rollouts and scaling with BU MSA, PCOM, and Innovation. Your Qualifications * 3rd-party Lead Auditor qualification under APSCA or an equivalent sustainability program (must-have). * 5+ years conducting 3rd-party certification audits for a management systems certification body, including complex multi-site engagements. * 3+ years managing direct reports; proven auditor coaching, calibration, and performance management. * Expert knowledge of audit principles/practices and relevant management system standards & normative documents within the assigned product line. * Practical knowledge of certification-body processes and certification rules; adept with audit management systems and Microsoft Office. * Excellent communication and presentation skills across client levels; strong stakeholder management. * High integrity, strong work ethic, and a collaborative team mindset. What We Offer * Impact and ownership within a recognized global TIC brand. * Collaboration with global stakeholders (BU MSA, PCOM, Innovation) and exposure to industry forums. * Professional development and structured auditor/leadership training pathways. * Inclusive, safety-focused workplace and mission-driven culture. * Competitive compensation and benefits aligned to local market (insert salary token if required by law in SF). Additional Information * Work model (on-site/hybrid/remote) and location to be defined with the hiring team. * Travel is required for client audits, calibration/training, and industry events; frequency varies by portfolio and region. * Employment type and start date per local conditions; visa/work authorization requirements apply where relevant. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now Contracts Analyst At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Review and analyze a wide range of commercial agreements (e.g., NDAs, vendor contracts, terms & conditions, service agreements) to align with company policies and risk guidelines. * Maintain contract repositories and tracking tools; monitor milestones, renewals, amendments, and expirations for assigned portfolios. * Partner with Legal, Procurement, Finance, Sales, and Operations to address contracting needs; provide guidance on language and assist in negotiations under supervision. * Identify legal and business risks in contract terms; recommend mitigations and ensure compliance with internal rules and approval matrices. * Support implementation/optimization of contract lifecycle management (CLM) systems and electronic signature workflows. * Prepare summaries, redlines, and playbook-aligned fallback positions to improve velocity and consistency. * Perform other duties as assigned to support the end-to-end contract lifecycle. Your Qualifications * Bachelor's degree (e.g., Business Administration, Legal Studies, Finance) or equivalent education. * 2-4 years of experience in contracts administration, legal support, or a related field; CLM/e-signature experience preferred. * Strong analytical, organizational, and problem-solving skills with exceptional attention to detail. * Proficiency with Microsoft Office; exposure to contract management software is a plus. * Excellent written and verbal communication; ability to manage multiple priorities and deadlines in a fast-paced environment. * High integrity, confidentiality, professionalism, and a strong customer-service orientation. What We Offer The anticipated annual base salary range for this full-time position is $110,000-$130,000. Final base pay depends on experience, training, qualifications, and internal equity. * Comprehensive benefits for eligible employees, including: * 401(k) with employer match * Medical, dental, and vision plans * Life and disability insurance * 12 weeks of paid parental leave * Generous paid time off Additional Information * Work model: Remote; occasional cross-functional meetings may require limited travel. * Role interfaces closely with Legal, Procurement, Sales, Finance, and Operations to support business objectives and compliant contract execution. * Employees are expected to uphold TÜV SÜD's values and foster a culture of quality, integrity, and customer focus. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer. Qualified applicants are considered without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity or expression, age, physical or mental disability, veteran status, or other legally protected characteristics. We participate in the E-Verify Employment Verification Program. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now Field Evaluation Engineer At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Conduct field labeling evaluations in accordance with TÜV SÜD program requirements and interpret/apply applicable test standards. * Schedule and execute assigned evaluations at client sites, ensuring timely and professional completion. * Establish and maintain professional relationships with customers, acting as a key point of contact. * Demonstrate knowledge of US regulatory standards and code requirements (e.g., ANSI/NFPA/UL standards). * Liaise with other staff to ensure consistency and accuracy of methods and interpretations. * Participate in and promote process improvements and the development of new product test requirements and strategies. * Provide travel and expense cost estimates as requested. * Report and track defects found during testing; record test data, technical information, and generate/revise test documents and reports (SOPs, datasheets, methods, etc.). * Review pre-evaluation documents to understand assignment objectives prior to service start. Your Qualifications * Bachelor's degree in electrical or mechanical engineering, or equivalent technical education and directly related experience. * Minimum 2 years of inspection and test experience evaluating products in accordance with ANSI/NFPA/UL standards. * Experience with NEC NFPA 70 and US standards (e.g., NFPA 79, UL508A, UL61010-1, UL61800-5-1, UL2202, ANSI/RIA R15.06, UL 1740); prior work in electrical code inspections is a plus. * Ability to travel frequently to US client sites (75%-90% travel). * Strong analytical, problem-solving, and troubleshooting skills. * Excellent verbal, written, and active listening skills; solid technical writing and interpersonal skills. * Strong engineering knowledge and understanding of testing requirements, manufacturing processes, drawings, and standards. * Ability to organize, prioritize, and perform multiple tasks while meeting or exceeding deadlines. What We Offer * Opportunity to work with a global leader in testing, inspection, and certification. * Collaborative and inclusive work environment. * Professional development and training opportunities. * Exposure to a wide range of client projects and industries. * Competitive compensation and benefits package. * Flexible remote work arrangements. * Commitment to employee well-being and safety. Additional Information * This is a remote, work-from-home position with significant travel in the northeastern United States. * Reasonable accommodations available for individuals with disabilities. * All employees are expected to support a safe and healthy work environment and adhere to TÜV SÜD policies and procedures. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Job Description Primary Purpose: The Process Safety Specialist supports the implementation and sustainment of the site's Process Safety Management (PSM) program, structured around seven core elements: Leadership, Process Hazard Analysis (PHA), Management of Change (MOC), Learning from Experience, Safe Work Practices, Mechanical Integrity, and Operating Practices. This role ensures consistent program execution, documentation accuracy, and field verification of safeguards, contributing to compliance with applicable OSHA, FERC, and PHMSA regulations. Working closely with Operations, Maintenance, and Engineering, the Specialist helps drive process safety ownership and continuous improvement across the LNG facility. This position is located in Hackberry, LA. Employee's primary residence must be located within a one-hour drive from the Hackberry plant site. This measure will assure that response time for callouts is kept to a minimum, which increases the safety of our employees in an unexpected or emergent situation. Transportation Worker Identification Credentials (TWIC) is required. Responsibilities: Support the execution of PSM goals, KPIs, and performance improvement initiatives defined by the HSSE Leadership Team. Maintain PSM documentation, dashboards, and action tracking within Enablon or an equivalent system to ensure traceability and visibility of progress. Assist with PSM awareness training, communications, and engagement activities that reinforce a process safety culture. Coordinate and support PHA and LOPA workshops; maintain up-to-date documentation, recommendations, and close-out tracking. Ensure PHA actions are integrated into the site's risk register and properly documented in Enablon. Conduct field verifications to confirm safeguards and assumptions remain valid. Review MOC packages for completeness and technical accuracy; assist departments with documenting justifications, risk assessments, and required approvals. Participate in Pre-Startup Safety Reviews (PSSR) and verify that safeguards, procedures, and training requirements are complete before startup. Monitor MOC closure timelines and provide performance reports. Support and participate in incident investigations and Root Cause Analysis (RCA) sessions. Document and track corrective actions, ensuring timely completion and communication of lessons learned. Contribute to the development of learning bulletins and integration of lessons into procedures and PHAs. Conduct or participate in field-level verifications of permit-to-work systems, isolation procedures, confined space entries, and hot work controls. Validate that safe work practices align with PSM and risk control expectations. Identify improvement opportunities for procedural clarity and field compliance. Support mechanical integrity program activities. Verify that critical equipment, instrumentation, and protective systems (e.g., relief valves, ESDs, SIFs) maintain required functionality and documentation. Assist in developing and updating operating procedures and job aids. Support operating discipline through field audits, operator interviews, and compliance checks. Facilitate the rollout of revised procedures and ensure training completion is captured in Enablon. Monitor and report PSM Key Performance Indicators (KPIs) to support leadership visibility and continuous improvement. Provide data analysis and summaries for audits, management reviews, and regulatory inspections. Identify gaps or trends and propose risk-based recommendations to improve PSM program maturity. Performs other duties as assigned. Qualifications: Education: Bachelor's degree in engineering, safety, or a related technical field. Experience: 3+ years of relevant experience in process safety or operations in an LNG, petrochemical, refining, or chemical processing facility. Familiarity with PSM regulatory frameworks (OSHA 29 CFR 1910.119, FERC, PHMSA) and their application in an LNG environment. Demonstrated ability to interpret P&IDs, PFDs, and engineering documents. Excellent written and verbal communication skills. Experience using digital compliance management systems (e.g., Enablon, PHA-Pro, or equivalent). Skills/ Knowledge/ Abilities: Experience using digital compliance management systems (e.g., Enablon, PHA-Pro, or equivalent). Understanding of mechanical integrity principles, including fixed equipment inspection, rotating equipment reliability, and protective device testing. Ability to conduct and document field walkdowns, verify installed safeguards, and validate compliance with MOC, PSSR, and action item closures. Strong technical writing and documentation skills, capable of developing procedures, job aids, and summary reports with clarity and regulatory rigor. Effective communication and collaboration skills, with the ability to engage cross-functional teams including Operations, Engineering, Maintenance, and HSE personnel. Detail-oriented with strong organizational skills, capable of managing multiple priorities and maintaining auditable records. Computer skills including, MS Office Suite (Word, Excel, Access, PowerPoint, MS Project, Visio, Adobe Acrobat Professional), SharePoint, etc. The candidate should have a working knowledge of industry and government standards. High level of HSSE knowledge. Strong written, verbal and interpersonal communication skills with the ability to be diplomatic and persuasive. Ability to communicate fluently in English. Organized and able to manage multiple activities timely and with a high degree of accuracy. Self-starter with ability to work strategically with minimal direction. Driven to meet and exceed performance parameters and work deadlines. Strong attention to details. Able to prioritize and execute tasks in a high-pressure environment. Able to remain calm and effective in emergencies. Understands and deals comfortably with a sense of urgency. Demonstrates high ethical standards for honesty, truthfulness and integrity. Ability to maintain confidential information and materials. Ability to interface with a culturally diverse range of personnel with varying disciplines, backgrounds, and experience levels. Ability to establish and maintain effective working relationships with terminal facility employees, vendors, and suppliers. Possesses the personality and ability to relate to and to establish a mutually respectful relationship with 1) management, 2) peers and 3) the various facility level workers whom are all responsible for ensuring good operations. Physical Requirements: Must be able to stand, walk, climb, run, sit, kneel, twist, bend, pull, push, carry, lift, reach overhead and drive. Most activities involve movement of either the upper and lower body extremities or both and the joints associated with these areas of the body. Must be able to enter confined spaces. Must be able to walk on uneven surfaces and climb stairs and ladders that ranges from 4 ft to 200 ft. Must be able to lift equipment needed to perform work. Must be able to wear safety equipment and other protective equipment as needed to perform job. When outdoors, this classification is exposed to extremes of heat, cold, loud noise and dust. Must be able to sit at a desk and operate a computer for extended periods of time. Must be willing to be on call, work outside of normal business hours as required and handle emergency response responsibilities. Must be able and willing to travel for trainings and/or meetings as required. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy.

Apply now Certification Body Management System Engineer At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Administer core management system programs for the USA Certification Body and Central Certification Body: internal audits, corrective actions (CAPA), document control, complaints, and appeals. * Coordinate ANAB witness and office audits (scheduling, logistics, evidence readiness) and track remediation actions. * Monitor hub KPIs and performance reporting; escalate trends and drive corrective/preventive actions with stakeholders. * Maintain controlled documentation and records in line with certification body rules and accreditation requirements. * Support cross-functional process improvements and projects assigned by Central Certification Body leadership. * Partner with internal teams to standardize workflows and ensure timely, high-quality submissions to accreditation bodies. * Provide clear status updates, summaries, and dashboards for management review. Your Qualifications * High school diploma or equivalent; 2+ years of work experience (quality, compliance, or certification support preferred). * Familiarity with certification body activities and management system auditing (internal or external) is a plus. * Proficient with Microsoft Word and Excel; comfortable with databases/trackers and document control tools. * Strong organization and follow-through; able to manage tasks/projects independently and meet deadlines. * Effective written, verbal, and presentation skills; confident interfacing with internal and external stakeholders. * Demonstrated initiative and problem solving; able to interpret procedures and propose improvements. * Team-oriented with solid interpersonal skills and sound decision-making. What We Offer * Impactful role supporting the integrity of TÜV SÜD's certification programs and accreditations. * Remote work model with collaboration across the USA Certification Body and Central Certification Body. * Opportunities to learn accreditation frameworks and grow in quality/compliance disciplines. * Access to tools, templates, and training that strengthen documentation and audit readiness. * Inclusive culture grounded in safety, integrity, and continuous improvement. Additional Information * Workplace model: Remote. * Travel: Some domestic travel up to 10%; occasional international travel with advance notice. * Work environment: Office/computer-based; frequent communication via phone/Teams/email; occasional lifting up to 35 lbs. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Primary Purpose: The Principle DCS Systems Engineer will demonstrate process control system engineering and programming/diagnostics expertise, safety instrumented system and emergency shutdown system expertise, safety integrity level expertise, and control maintenance services capital planning and execution expertise, for the facility. Works closely with other staff to provide control engineering services where needed. This position is located in Hackberry, LA. Transportation Worker Identification Credentials (TWIC) is required. Employees' primary residence must be located within a one-hour drive from the Hackberry plant site. This measure will assure that response time for callouts is kept to a minimum, which increases the safety of our employees in an unexpected or emergent situation. Responsibilities/Duties: Oversees the process controls systems from an engineering perspective and assures all design modifications or additions of the same are performed professionally and in strict accordance with company procedures and code compliances. Assures all planning, scheduling and managing all process control engineering activities, emergency shutdown system (ESD) and safety instrumented system (SIS) activities, and safety integrity level (SIL) activities related to plant facilities are coordinated and performed safely and efficiently. Leads resolution of any alarm flooding, management, and rationalization issues. Provides daily process control, SIS, and ESD supports to the plant to keep the plant systems operational. Improves and ensures the reliability and integrity of the SIS, ESD, and process control systems. Optimizes the SIS, ESD, SIL, and process controls systems for efficiency and equipment reliability. Develops or supports the development of proposals for facility improvements including design basis and preliminary estimates for capital projects as assigned. During development and construction, supports the Program Manager as assigned to minimize overruns in project-related spending. Helps develop process control, SIS, ESD, and SIL maintenance requirements for all operational projects and new developments, from conception to completion in line with budgets and on time scheduling. Ensures that documentation for the process control, SIS, ESD, and SIL systems are maintained properly. Participates in the development of documentation standards including updates to the unit operating manuals. Participates in the Management of Change process. Uses computer assisted engineering and design software to perform engineering tasks and develops documentation. Assists in developing and managing budgets and schedules to meet financial targets with an understanding of the accounting and procurement procedures and guidelines and abides by them. Performs other duties as assigned. Qualifications: Education: Bachelor of Science in Engineering required (Electrical, Electronic or Chemical discipline preferred). Experience: Minimum of 14 years of direct DCS experience required; and a minimum of 4+ years of experience in a similar position of responsibility and expertise in an operating LNG Liquefaction facility preferred. At least 15 years in the chemical, petrochemical, , or oil and gas industry. Has proven track record in troubleshooting and analysis of instrumentation and process control system problems. Prior experience with DeltaV control systems and Rockwell PLC systems preferred. Experience with GE Mark-VI is desired. Prior experience in solving alarm management systems, preferred. Skills/ Knowledge/ Abilities: Have basic computer skills including project management, database, and use of Microsoft Office programs. Possesses good planning and organization skills and meets work deadlines. Provides leadership and discipline expertise to less experienced support staff, engineering design, maintenance, and operation groups. Strong written, verbal and interpersonal communication skills. Ability to communicate fluently in English. Self-starter with ability to work strategically with minimal direction. Driven to meet and exceed performance parameters. Strong attention to details. Able to prioritize and execute tasks in a high-pressure environment. Able to remain calm and effective in emergencies. Understands and deals comfortably with a sense of urgency. Demonstrates high ethical standards for honesty, truthfulness and integrity. Ability to interface with a culturally diverse range of personnel with varying disciplines, backgrounds, and experience levels. Ability to establish and maintain effective working relationships with terminal facility employees, vendors, and suppliers. Possesses the personality and ability to relate to and to establish a mutually respectful relationship with 1) management, 2) peers and 3) the various facility level workers whom are all responsible for ensuring good operations. Physical Requirements: Must be able to stand, walk, climb, run, sit, kneel, twist, bend, pull, push, carry, lift, reach overhead and drive. Most activities involve movement of either the upper and lower body extremities or both and the joints associated with these areas of the body. Must be able to sit at a desk and operate a computer for extended periods of time. Must be willing to be on call, work outside of normal business hours as required and handle emergency response responsibilities. Must be willing to travel for trainings and/or meetings as required. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy.

Apply now Forest Analyst At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Support forest carbon project verification, including site visits in North America and internationally, project modeling analysis, documentation audits, and verification report completion. * Conduct on-site inventory audits, including forest mensuration, harvest/silvicultural method analysis, and boundary verification. * Analyze and audit carbon quantification data, including growth and yield modeling, and evaluate modeling software (e.g., USFS FVS, CBM-CFS3, Remsoft Woodstock). * Perform GIS analysis and cartography, ensuring conformance to forest carbon protocols; utilize online/mobile GIS tools for field data collection. * Build and maintain professional relationships with clients, agencies, and stakeholders; represent the company effectively and professionally. * Stay current on technical and regulatory issues related to forest carbon programs through active participation in industry groups. * Ensure a safe work environment by following and promoting company safety policies and participating in safety programs. Your Qualifications * Bachelor's degree in Forestry or a closely related field (required). * Minimum 5 years of experience in forestry or a related field. * Experience in forest carbon project development, validation/verification, or registry/regulatory oversight (preferred). * High proficiency in forest inventory measurements, sampling protocols, and the use of ESRI GIS software. * Strong skills in Microsoft Excel, database management (e.g., Access, R), and spatial data analysis. * Valid driver's license and clear driving record. * Ability to work safely and effectively in remote, rugged terrain and adverse weather conditions. * Excellent written and oral communication skills. * Professional Forester credential or SAF Certified Forester, or ability to obtain within 1 year (preferred). * Ability to attain forestry verifier credentials with relevant registries within 1 year of hire (preferred). What We Offer * Flexible remote work model. * Opportunities for professional development and certification. * Collaborative and inclusive team environment. * Exposure to innovative forest carbon and sustainability projects. * Support for safety and well-being, including comprehensive safety programs. * Opportunities for travel to diverse project locations. * Commitment to diversity, equity, and inclusion in the workplace. Additional Information * This position may require travel to remote locations, including use of specialized vehicles (e.g., float planes, ATVs). * Physical activities may include walking, hiking, or standing for extended periods in challenging terrain and weather. * The role is exempt and may require occasional lifting/moving of up to 50 pounds. * We welcome applications from people of all backgrounds, experiences, and perspectives. You don't meet every single requirement? No problem - we encourage you to apply if this role excites you. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.

Apply now ISO 9001 Lead Auditor Your Tasks * Conduct third-party certification audits for AS9100/AS9120 standards in line with accreditation and internal requirements. * Plan, prepare, and deliver audits (on-site and remote), including opening/closing meetings, audit execution, and audit reporting. * Ensure compliance with aerospace quality management standards, industry regulations, and IAQG requirements. * Provide clear, timely, and accurate audit reports, maintaining professional communication with clients. * Collaborate with technical and certification teams to support audit scheduling, technical review, and certification decisions. * Stay current with aerospace quality standards and contribute to continuous improvement and impartiality in certification activities. Your Qualifications * Bachelor's degree in Engineering, Quality, Aerospace, or a related technical field (or equivalent experience). * At least 4-5 years of professional experience in the aerospace, aviation, or defense industry. * Proven experience conducting AS9100 and/or AS9120 third-party audits under an accredited certification body. * Current Aerospace Auditor certification through an approved scheme (AA, AEA, or equivalent with OASIS recognition). * Strong knowledge of ISO 9001, AS9100, AS9120, and related management system requirements. * Excellent communication skills in English, both written and spoken. * Strong analytical, organizational, and interpersonal skills with a willingness to travel frequently. What We Offer * Competitive annual salary of $100,000-$120,000. * Comprehensive benefits package including health, dental, vision, and retirement plan. * Paid time off and company holidays. * Continuous training and professional development opportunities. * Opportunity to work with a global leader in certification and assurance services. Additional Information * Location: United States (Remote with travel required). * Employment Type: Full-time, permanent position. * Onboarding and training programs are provided to support your success. * You don't meet every requirement? No problem - we encourage you to apply if this role excites you.

Primary Purpose: The Process Safety Specialist supports the implementation and sustainment of the site's Process Safety Management (PSM) program, structured around seven core elements: Leadership, Process Hazard Analysis (PHA), Management of Change (MOC), Learning from Experience, Safe Work Practices, Mechanical Integrity, and Operating Practices. This role ensures consistent program execution, documentation accuracy, and field verification of safeguards, contributing to compliance with applicable OSHA, FERC, and PHMSA regulations. Working closely with Operations, Maintenance, and Engineering, the Specialist helps drive process safety ownership and continuous improvement across the LNG facility. This position is located in Hackberry, LA. Employee's primary residence must be located within a one-hour drive from the Hackberry plant site. This measure will assure that response time for callouts is kept to a minimum, which increases the safety of our employees in an unexpected or emergent situation. Transportation Worker Identification Credentials (TWIC) is required. Responsibilities: Support the execution of PSM goals, KPIs, and performance improvement initiatives defined by the HSSE Leadership Team. Maintain PSM documentation, dashboards, and action tracking within Enablon or an equivalent system to ensure traceability and visibility of progress. Assist with PSM awareness training, communications, and engagement activities that reinforce a process safety culture. Coordinate and support PHA and LOPA workshops; maintain up-to-date documentation, recommendations, and close-out tracking. Ensure PHA actions are integrated into the site's risk register and properly documented in Enablon. Conduct field verifications to confirm safeguards and assumptions remain valid. Review MOC packages for completeness and technical accuracy; assist departments with documenting justifications, risk assessments, and required approvals. Participate in Pre-Startup Safety Reviews (PSSR) and verify that safeguards, procedures, and training requirements are complete before startup. Monitor MOC closure timelines and provide performance reports. Support and participate in incident investigations and Root Cause Analysis (RCA) sessions. Document and track corrective actions, ensuring timely completion and communication of lessons learned. Contribute to the development of learning bulletins and integration of lessons into procedures and PHAs. Conduct or participate in field-level verifications of permit-to-work systems, isolation procedures, confined space entries, and hot work controls. Validate that safe work practices align with PSM and risk control expectations. Identify improvement opportunities for procedural clarity and field compliance. Support mechanical integrity program activities. Verify that critical equipment, instrumentation, and protective systems (e.g., relief valves, ESDs, SIFs) maintain required functionality and documentation. Assist in developing and updating operating procedures and job aids. Support operating discipline through field audits, operator interviews, and compliance checks. Facilitate the rollout of revised procedures and ensure training completion is captured in Enablon. Monitor and report PSM Key Performance Indicators (KPIs) to support leadership visibility and continuous improvement. Provide data analysis and summaries for audits, management reviews, and regulatory inspections. Identify gaps or trends and propose risk-based recommendations to improve PSM program maturity. Performs other duties as assigned. Qualifications: Education: Bachelor's degree in engineering, safety, or a related technical field. Experience: 3+ years of relevant experience in process safety or operations in an LNG, petrochemical, refining, or chemical processing facility. Familiarity with PSM regulatory frameworks (OSHA 29 CFR 1910.119, FERC, PHMSA) and their application in an LNG environment. Demonstrated ability to interpret P&IDs, PFDs, and engineering documents. Excellent written and verbal communication skills. Experience using digital compliance management systems (e.g., Enablon, PHA-Pro, or equivalent). Skills/ Knowledge/ Abilities: Experience using digital compliance management systems (e.g., Enablon, PHA-Pro, or equivalent). Understanding of mechanical integrity principles, including fixed equipment inspection, rotating equipment reliability, and protective device testing. Ability to conduct and document field walkdowns, verify installed safeguards, and validate compliance with MOC, PSSR, and action item closures. Strong technical writing and documentation skills, capable of developing procedures, job aids, and summary reports with clarity and regulatory rigor. Effective communication and collaboration skills, with the ability to engage cross-functional teams including Operations, Engineering, Maintenance, and HSE personnel. Detail-oriented with strong organizational skills, capable of managing multiple priorities and maintaining auditable records. Computer skills including, MS Office Suite (Word, Excel, Access, PowerPoint, MS Project, Visio, Adobe Acrobat Professional), SharePoint, etc. The candidate should have a working knowledge of industry and government standards. High level of HSSE knowledge. Strong written, verbal and interpersonal communication skills with the ability to be diplomatic and persuasive. Ability to communicate fluently in English. Organized and able to manage multiple activities timely and with a high degree of accuracy. Self-starter with ability to work strategically with minimal direction. Driven to meet and exceed performance parameters and work deadlines. Strong attention to details. Able to prioritize and execute tasks in a high-pressure environment. Able to remain calm and effective in emergencies. Understands and deals comfortably with a sense of urgency. Demonstrates high ethical standards for honesty, truthfulness and integrity. Ability to maintain confidential information and materials. Ability to interface with a culturally diverse range of personnel with varying disciplines, backgrounds, and experience levels. Ability to establish and maintain effective working relationships with terminal facility employees, vendors, and suppliers. Possesses the personality and ability to relate to and to establish a mutually respectful relationship with 1) management, 2) peers and 3) the various facility level workers whom are all responsible for ensuring good operations. Physical Requirements: Must be able to stand, walk, climb, run, sit, kneel, twist, bend, pull, push, carry, lift, reach overhead and drive. Most activities involve movement of either the upper and lower body extremities or both and the joints associated with these areas of the body. Must be able to enter confined spaces. Must be able to walk on uneven surfaces and climb stairs and ladders that ranges from 4 ft to 200 ft. Must be able to lift equipment needed to perform work. Must be able to wear safety equipment and other protective equipment as needed to perform job. When outdoors, this classification is exposed to extremes of heat, cold, loud noise and dust. Must be able to sit at a desk and operate a computer for extended periods of time. Must be willing to be on call, work outside of normal business hours as required and handle emergency response responsibilities. Must be able and willing to travel for trainings and/or meetings as required. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions as defined per Company policy.

Apply now Contracts Analyst At TÜV SÜD we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD. Your Tasks * Review and analyze a wide range of commercial agreements (e.g., NDAs, vendor contracts, terms & conditions, service agreements) to align with company policies and risk guidelines. * Maintain contract repositories and tracking tools; monitor milestones, renewals, amendments, and expirations for assigned portfolios. * Partner with Legal, Procurement, Finance, Sales, and Operations to address contracting needs; provide guidance on language and assist in negotiations under supervision. * Identify legal and business risks in contract terms; recommend mitigations and ensure compliance with internal rules and approval matrices. * Support implementation/optimization of contract lifecycle management (CLM) systems and electronic signature workflows. * Prepare summaries, redlines, and playbook-aligned fallback positions to improve velocity and consistency. * Perform other duties as assigned to support the end-to-end contract lifecycle. Your Qualifications * Bachelor's degree (e.g., Business Administration, Legal Studies, Finance) or equivalent education. * 2-4 years of experience in contracts administration, legal support, or a related field; CLM/e-signature experience preferred. * Strong analytical, organizational, and problem-solving skills with exceptional attention to detail. * Proficiency with Microsoft Office; exposure to contract management software is a plus. * Excellent written and verbal communication; ability to manage multiple priorities and deadlines in a fast-paced environment. * High integrity, confidentiality, professionalism, and a strong customer-service orientation. What We Offer The anticipated annual base salary range for this full-time position is $110,000-$130,000. Final base pay depends on experience, training, qualifications, and internal equity. * Comprehensive benefits for eligible employees, including: * 401(k) with employer match * Medical, dental, and vision plans * Life and disability insurance * 12 weeks of paid parental leave * Generous paid time off Additional Information * Work model: Remote; occasional cross-functional meetings may require limited travel. * Role interfaces closely with Legal, Procurement, Sales, Finance, and Operations to support business objectives and compliant contract execution. * Employees are expected to uphold TÜV SÜD's values and foster a culture of quality, integrity, and customer focus. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer. Qualified applicants are considered without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity or expression, age, physical or mental disability, veteran status, or other legally protected characteristics. We participate in the E-Verify Employment Verification Program. Equal Opportunity Employer - Disability and Veteran TÜV SÜD America, Inc. is an equal opportunity, affirmative action employer and considers qualified applicants for employment without regard to race, color, creed, religion, ancestry, marital status, genetics, national origin, sex, sexual orientation, gender identity and expression, age, physical or mental disability, veteran status and those laws, directives, and regulations of Federal, State, and Local governing bodies or agencies. We participate in the E-Verify Employment Verification Program.