Capital City Construction jobs in Bismarck, ND - 572 jobs

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

IS ELIGIBLE FOR A SIGN-ON BONUS OF UP TO $6,000+ DEPENDING ON EXPERIENCE** The Advanced Diesel Technician independently performs advanced diagnostics, service repairs and maintenance work on customer and/or dealer-owned agricultural equipment. True North Equipment has been in business since 1949 and has 10 locations with over 200 employees. Our employees are the key to our success and have helped us get to where we are today, operating in two states across the Red River Valley. True to our Values...Driven by You! It takes our entire team to make True North Equipment exceptional. We strongly desire individuals who are self-starters and hard-workers, always willing to dive into a new challenge and who are eager to learn. We strive to provide you with limitless opportunities for growth and education that will challenge you. Most importantly, we want you to have fun working at TNE! You'll focus on: Performs advanced diagnostics and repairs on agricultural equipment and established Ag Management Solutions (AMS) products Participates in Service EDUCATE Training programs required for the development of skills and knowledge Mentors Service Technician Trainees Conducts or supports customer clinics Maintains current knowledge of John Deere and competitive products Maintains condition of vehicles, inventory, tools and equipment Maintains a clean work area and performs work in a neat and orderly fashion Follows all safety rules and regulations in performing work assignments Forklift experience and license preferred. Completes all reports and forms required in conjunction with work assignments Accounts for all time and all material used in performing assigned duties Must be able to work regular Service Department hours, and maintain reliable attendance Normal hours worked are Mon-Fri 8am-5pm in our off season. Seasonal hours worked are Mon-Fri 730am-530pm and every other Saturday 730am-12pm, with extended hours and on call hours seasonally What we are looking for: Associates degree and 5+ years of experience performing service repairs Ability to perform advanced repairs and maintenance using special tools and equipment following Technical Manual procedures on machines of the Technician's specialty Advanced knowledge of mechanical, electrical and hydraulic systems used in the repair of agricultural and turf equipment Excellent skills in operating vehicles and equipment used for diagnostic purposes Ability to use Service Advisor and basic computer functions Advanced Diesel Service Technician education preferred Must be able to retain positive relationships with co-workers Valid driver's license required Candidates must have a valid work authorization and be able to work in the U.S. without company sponsorship Total Rewards Package: $26-$40+/hr depending on years of experience, PLUS a sign-on bonus of up to $5,000 Insurance: Health insurance with 100% single premium paid, 75% SPD or family premium paid; TNE covers 50% of all dental and vision premiums; 100% of short/long-term disability insurance, and life insurance. 401K: TNE offers 401K with company matching for qualified employees because who doesn't want to save for retirement! PTO: Take time off, we encourage it! Holidays: We have 7 paid holidays and a few other specials days for you to spend with your favorite people. Professional Development: Continuous professional training and growth opportunities because we value your growth at TNE. Community Involvement: Give back to your community with our paid time off for you to volunteer. You can also use this time for your doctors' appointments, too! Parental Leave: If you're expecting or looking to start a family, we have paid parental leave because you have waited long enough for your bundle(s) of joy! AND SO MUCH MORE! All new hires must pass a pre-employment background check and drug screening, and based on the job requirements, you may also be subject to DOT drug and alcohol testing requirements True North Equipment is an Affirmative Action and Equal Opportunity Employer. True North Equipment will not discriminate against or harass any employee or applicant for employment because of race, color, creed, religion, national origin, sex, sexual orientation, disability, age, marital status, familial status, membership or activity in a local human rights commission, or status with regard to public assistance.

Were Hiring: Construction Manager At Horwitz, we dont just offer jobswe build careers. For over 100 years, weve been a leader in HVAC, plumbing, electrical services, delivering exceptional service while fostering a supportive and innovative workplace. Joining our team means working with passionate professionals in a culture built on safety, accountability, professionalism, motivation, curiosity, and a can-do attitude. Were committed to your growth with training, mentorship, and advancement opportunities. Along with competitive benefitsyoull be part of a company that values its employees and makes a positive impact in the community. Join Horwitz and become part of a legacy of excellence and opportunity. Position Overview This role leads the construction team to ensure safety, deliver high-quality projects, and drive profitability. Serving as the primary point of contact for clients and partners, the position oversees project execution from scheduling and budgeting to quality control, site logistics, and financial performance. Collaboration with internal teamsestimating, preconstruction, BIM/VDC, procurement, accounting, safety, quality, and commissioningis critical to success. The leader in this role will manage project schedules, forecasting, billing, and cash flow, while also holding the team accountable for performance and safety. With a strong focus on operations and long-term site success, this position is viewed as the heir apparent to lead future work on the site. Key Responsibilities Lead, manage, and hold accountable the construction team to be safe, to exceed customer expectations, and to be profitable Work collaboratively with support teams including estimating, preconstruction & BIM/VDC team, procurement, accounting, safety, quality control, and commissioning Top priority and core value is safety Manage team to meet follow and document all quality control requirements and to set the sight up for success for the commissioning team Develop, track and maintain project schedule with project superintendent and project managers. Work with project controller to ensure timely entry of invoices and timely preparation of all billing materials GMP tracking with margin calculator Responsible for managing fabrication schedule expectations and deliveries along with the superintendent and fabrication manager Must understand all contracts, GMP structure, and plans/specs and drive the schedule and manpower to meet or exceed estimate expectations First point of contact for A&P and AppliedDigital Working with project team to track productivity Monitoring weekly cash flow with project controller. Weekly call with Project Executive, CFO, CEO, VP OPs and Construction GM Schedule tracking to the next level familiarity with P6 Scheduling, Earned Value Management, and Last Planner System Forecasting project financials In charge of all operations on the jobsiteand site logistics Understanding Procurement and logistics (PMs are responsible for tracking material/equipment) Ideally this role is the heir apparent for leading all future work on this site Responsible for reviewing change orders with estimating team and project managers Weekly/daily touch base with team members and support Admin Superintendent Fabrication Plumbing PM Sheet Metal PM Piping PM Labor Coordinator Subcontractors insulation, excavation, sheetmetal fabrication QC Cx Procurement BIM/VDC Fabrication Qualifications Proven leadership experience managing construction teams on complex projects Strong financial and scheduling skills, including GMP tracking and forecasting Proficiency with advanced scheduling tools (P6, Earned Value Management, Last Planner System) Ability to coordinate across multiple functions and subcontractors Strong communication and client relationship skills, with safety as a core value Why Horwitz? Legacy & Leadership: Over a century of industry experience and innovation People-First Culture: Supportive team environment where your growth is a priority Competitive Benefits: Health insurance, 401(k), PTO, and supplemental benefits

Job DescriptionSalary: $30 - $40 At Horwitz, we dont just offer jobswe build careers. For over 100 years, weve been a leader in HVAC, plumbing, electrical services, delivering exceptional service while fostering a supportive and innovative workplace. Joining our team means working with passionate professionals in a culture built on safety, accountability, professionalism, motivation, curiosity, and a can-do attitude. Were committed to your growth with training, mentorship, and advancement opportunities. Along with competitive benefitsyoull be part of a company that values its employees and makes a positive impact in the community. Join Horwitz and become part of a legacy of excellence and opportunity. POSITION OVERVIEW: The Safety Coordinator will provide support to office and field personnel located at the Fargo Polaris Forge project site. This person will also assist the Safety Manager with enforcing the Company Safety policies and procedures. In addition to the project site safety responsibilities, they shall participate in and complete all tasks assigned to them by the Safety Manager. RESPONSIBLITIES/DUTIES: These responsibilities generally describe the nature of the position and may not be all inclusive: Assist in the development and enforce the Safety Program and Site-Specific Safety and Health Plans. Provides technical safety advice, coaching, guidance, and mentoring to all employees regarding Horwitz safety policies and procedures. Responsible to stay updated in all necessary State and Federal rules and regulations relevant to our scope of work. Assists the Safety Manger, with performing in-house training with regard to site safety and safety related regulations. Assists with writing new company safety policies and procedures as needed. Assists with reporting, handling, and monitoring of workers compensation, property, and general liability insurance claims. Assist in conducting new hire orientations for every new employee. Conduct weekly site safety inspections on site. Assist in investigating all accidents, incidents, and near misses. Performs other duties as assigned. Conduct yourself in accordance with Horwitz core values: Safe, Accountable, Professional, Motivated, Can Do and Curious. SKILLS/ABILITES: Entry to intermediate level knowledge of State and Federal environmental, health, and safety standards and regulations. Intermediate knowledge of commonly used computer programs (MS Office Word, Excel, and Outlook). Verbal and written communication skills, including ability to effectively communicate. Ability to work under pressure and meet deadlines, while maintaining a positive attitude. Uses time productively, maximize efficiency and meet challenging work goals. Maintain compliance with all company policies and procedures. Possess and maintain an exceptional work ethic as well as uphold company values and demand the highest standard of conduct from self and others. EDUCATION/EXPERIENCE: EHS related undergraduate degree program Intermediate experience with managing a HVAC Service or Construction safety program preferred but not required. or a combination of both a minor in an EHS field and 2 years of construction safety experience where construction safety was your primary responsibility (75% is the minimum). or board-certified Construction Health and Safety Technician, (CHST) OSHA 30 Certification preferred but not required. Ability to complete within first 10 days of employment.

Rice Companies is looking for an experienced Estimator to join our Fargo, ND team. An Estimator is responsible for assisting in all estimating functions, conceptual budgets, database maintenance and historical cost/ production rates. The estimator works closely with other estimators, assisting in RFP's, hard bids, and other project related activities. Position Responsibilities: * Work closely with estimators, project managers, architects, and others in a design/ build, team environment pursuing projects and responding to RFP's. * Build and maintains effective relationships with customers, owners, subcontractors, suppliers, and other Rice Companies employees. * Subcontractor, vendor, and supplier bid solicitation. * Read and interpret project plans, specifications, and other criteria to provide detailed estimates and back-up. * Utilize company approved costing methodology, data, and systems to present estimate results in a detailed breakdown format suitable for use by the project manager and the project team. * Prepare detailed quantity lists and take-offs. * Maintain knowledge of pricing, construability, schedules, and typical construction details. * Maintain and develop historical cost databases including information on vendors, subcontracts, suppliers, self-performance production rates and other factors that are used in developing conceptual, DD and CD estimates. Qualifications: Qualifications include, but are not limited to: * Three (3) to Five (5) years of relevant experience, ideally within a design/ build commercial construction environment preferred. (drafting, material take offs, measuring/calculating square footage, reading blueprints, etc.) * Experience with Sage/ Timberline estimating, On-Screen takeoff tools and/ or other industry standard estimating software preferred. * Must be able to handle multiple projects concurrently and work independently with minimal supervision. * Must be proactive and skilled in detailed follow-up. * Flexibility to effectively deal with changing priorities and timelines through analytical problem-solving. * A desire for continuous improvement and close collaboration * Outstanding interpersonal skills coupled with strong written and oral communication skills are desired. An ability to interact with Clients on a professional and representative manner is a must. Benefits: With competitive pay, family-forward benefits and a little fun mixed in, Rice Companies works to build a team that's second to none. * Medical and Dental Insurance (Select Employee Only Premiums are 100% Company Paid) * Life Insurance * 401K w/Employer Match * Paid Time Off (PTO) * Paid Holidays * Career Training and Development

We build trust among our communities and our people by cultivating the right team for every job. We are committed to fostering a creative and collaborative culture with a focus on career growth and balance in the workplace. AP has diligently built a strong foundation of expertise, experience and exceptional results. We continually invest in our talented team by providing the latest tools, technologies and training necessary to stay ahead of the curve. We set our employees up for long-term success through mentorship opportunities and professional growth and advancement for every person in every role. We recognize the contributions of our team members with unique experiences and capabilities and strive to establish a work environment that maximizes our collective potential. Going beyond the build for our employees lays a strong foundation for success across AP. We commit to a balanced, value-centered work environment for meaningful projects, careers and talent. Job Description: Estimated Pay: $70,000.00 - $105,000.00 Benefits: Medical, Dental, Vision and Life Insurance Health Savings Account 401(k) Flexible Spending Accounts (Dependent & Medical Reimbursement) Paid Time Off (PTO) and Holidays Tuition Assistance Program Employee Referral Bonus Adolfson & Peterson Construction's (AP) ability to adapt and innovate has driven our success for more than 75 years. We are consistently ranked among the top construction managers and general contractors in the nation while maintaining one of the safest records in the industry. We bring positive and measurable change to the communities where we live, work and build. And we invest in new processes and technology to be operationally excellent and remain at the forefront of the ever-changing industry. We have been committed to quality, innovation, safety and strong relationships since our beginning in 1946. AP offers preconstruction, construction and contracting services to commercial, education, healthcare, hospitality, industrial, multifamily, municipal, data center, and senior living markets with offices across Arizona, Colorado, Minnesota, Texas, and Wyoming. We employ more than 650 team members who strive for excellence and embody loyalty, trust and genuine love for what they do. We go beyond the build for our communities and our people. Adolfson & Peterson Construction is an Equal Employment Opportunity Employer

About Us Brink Constructors, Inc. is an electrical contractor with over 75 years of experience in high-voltage transmission line and substation erection. With a long and industrious history, our experienced team continues to help power the nation now and into the future. At Brink, our success stems from the skilled personnel that we employ and the philosophy we instill to follow and uphold our core fundamental ideals including Safety First. Becoming a member of the Brink team is more than "just a job" or satisfactory employment-at Brink, we build careers, and we invest in the future of our people. Bring your skills to light and power your future with our team. About this Role This job requires a DOT physical and a current DOT medical card. Brink Constructors, Inc. The Barehand Lineman performs highly specialized work on energized high-voltage transmission lines using barehand techniques. This role requires exceptional technical skill, physical conditioning, and strict adherence to safety protocols. You'll work under the supervision of a project foreman and construction manager, executing tasks that demand precision, confidence, and a deep understanding of electrical theory and live-line procedures. This role requires 100% travel throughout the Mid-West. Pay: This is a non-exempt hourly role. The pay range is $50 -$55 / hour What You'll Do Key Responsibilities * Perform barehand work on energized transmission lines, voltages 69 kV and up. * Safely access energized conductors using aerial lifts, ladders, or helicopters as required. * Maintain minimum approach distances and use equipotential bonding techniques. * Install, repair, and maintain transmission structures and hardware while lines remain energized. * Operate specialized tools and equipment such as hot sticks, conductive suits, and aerial platforms. * Conduct pre-job briefings and hazard assessments specific to barehand procedures. * Maintain a clean and organized work area and ensure proper care of tools and equipment. * Demonstrate expert-level safety awareness and compliance with OSHA and Brink safety standards. * Travel to job sites and report punctually as directed. What You'll Bring Required Skills, Experience, and Certifications: * Minimum 4 years of transmission line experience. * Quanta Barehand Certification or willingness to obtain through company. * Proficiency in using conductive suits, bonding techniques, and live-line tools. * Ability to work at heights exceeding 120 feet and in challenging environments. * Strong understanding of electrical theory, transmission systems, and live-line safety. * High school Graduate, Holder of G.E.D., or equivalent studies/ experience * DOL Recognized Journeyman Lineman Certificate * Ability to read and interpret technical drawings, maps, and safety documentation. * Physical fitness and mental focus to perform demanding tasks under pressure. * Class A Commercial Driver's License (CDL) required What You'll Get Benefits * 401(k) with company match (traditional & roth available) * Paid Holidays and PTO * Parental Leave * Medical, Dental, Vision * Additional Voluntary benefits available * Employee Discounts * Company paid: * Health Plan (HDHP 5,000 -other plan options available for cost) * Long Term Disability * 1X Base Salary life Insurance * Employee Assistance Program Brink Constructors, Inc. does not sponsor applicants for work visas. All applicants must be legally authorized to work in the United States. Brink Constructors, Inc. participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Brink Constructors, Inc. will only use E-Verify once you have accepted a job offer and completed the Form I-9. Brink Constructors, Inc. is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all applicants and employees regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, disability, status as a covered veteran, or other military status. Applications for this position will be accepted on an ongoing basis. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Brosz Engineering is seeking a motivated Civil Engineering Intern to join our team and gain hands-on experience in infrastructure design, project management and client interaction. This internship offers exposure to projects including roadway design, stormwater management, site development, and transportation planning. Requirements Design & Technical Work Assist senior engineers with AutoCAD and Civil 3D drafting for roadway and site development projects. Perform basic hydraulic and hydrologic calculations for stormwater management systems. Support preparation of technical drawings, specifications and construction documents. Conduct field measurements and data collection for ongoing projects. Review and check drawings for accuracy and compliance with local standards. Project Support Participate in project team meetings and client presentations. Assist with project scheduling, budget tracking and progress reporting. Prepare materials and documentation for permit applications. Support quality assurance and quality control processes. Maintain organized project files and documentation systems. Conduct site visits to observe construction progress and document conditions through photography and written reports. Equal Opportunity Statement Brosz Engineering, Inc. is an Equal Opportunity Employer. Brosz Engineering, Inc. does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Salary Description $23-28/hour based on qualifications

Twin City Roofing is a commercial roofing company that specializes in the application of single-ply membranes on schools, hospitals, office buildings, shopping centers, power plants, etc. We are seeking the right individual to work in our sheet metal division. Our sheet metal department is responsible for the fabrication/installation of the Prefinished Sheet Metal Flashings and Trim that is installed at the perimeter of the building so attention to detail and taking pride in your work is a must. Our sheet metal division also installs standing seam metal roof systems, wall panels, and soffit panels on various projects. APPLY

Maintain & organize lot & yard by dragging gravel, filling pot-holes, picking up debris & basic lawn maintenance (mowing, weed whipping, spraying.) Pick-up & delivery of customer equipment for repair with truck & trailer Efficiently & effectively clean customer equipment with pressure washer prior to service or delivery Hours: Monday - Friday 7:30 am - 5:30 pm Pay: Depends upon experience, negotiations begin at $16.00 per hour Requirements: Valid drivers license & insurability through our provider Familiarity with lawncare tools use & maintenance Familiarity with pressure washer use & maintenance

Area Operations Manager Vice President, Operations The Director of Operations plans, leads, and oversees all aspects of operations activities in the designated area/division with an unwavering commitment to safety, ethics, quality, people leadership and customer care. Essential Functions Collaborates with senior leadership to develop and meet company goals while supplying expertise and guidance on area/division operations. Implements and communicates the strategic direction of the organization within the designated area/division. Drives exceptional safety performance in the area/division through visible, transparent leadership on work sites. Collaborates with other areas/divisions and groups to carry out the organization's goals and objectives. Leads by example. Always represents Apache favorably. Conducts business in a professional and ethical manner at all times. Upholds all company and customer policies, procedures and guidelines and holds others accountable for doing the same. Identifies, recommends, and implements new processes, technologies, and systems to improve and streamline organizational processes and use of resources and materials. Ensures that departmental decisions and project plans such as those for staffing, development, organization, material efficiency, and facilities are in line with the organizations business plan and vision. Establishes, communicates, and implements operations-related policies, practices, standards, and security measures to ensure effective and consistent support and execution. Reviews and approves cost-control reports, cost estimates, and staffing requirements for the designated area/division. Establishes and manages the area/division's budget. Presents regular performance reports and metrics to the senior leadership team. Maintains knowledge of emerging technologies, industry best practices and trends in operations management. Provides excellent people leadership including delivering constructive and timely feedback on performance, handling disciplinary issues in accordance with company policy and supporting team member development for the betterment of the team member and Apache. Represents Apache in industry-recognized organizations, conferences, and events as an active participant and/or in a leadership role. Other duties as assigned. Education & Experience 7-10 years of leadership experience within the industrial insulation construction/maintenance business. Bachelor's degree in Business Administration, Construction, Engineering, or another industry-related field preferred. Knowledge, Skills, and Abilities Extensive knowledge of the principles, procedures, and best practices in the industry. Established industry network and regular participation/leadership in industry recognized organizations Demonstrated success in creating and articulating complex strategies and plans to both senior management and peers. Demonstrated ability to build collaborative relationships and influence others positively. Proven ability to drive strategic direction. Executive presence, one who possesses the depth of experience to comfortably interact with senior leaders within the company while remaining accessible to everyone. Strong analytical and problem-solving skills. An enterprise-wide thinker, with a lens on how decisions made within one site or unit may affect others across the business Driven self-starter with a strong attention to detail and ability to operate autonomously Working Conditions/Physical Demands Remaining in a stationary position, often standing, or sitting for prolonged periods. Frequent travel to work sites and offices (driving and/or flying). Light work that includes moving objects up to 20 pounds. No adverse environmental conditions expected.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. Please note: Visa sponsorship is not available at this time for this position. The Field Engineer is responsible for managing large and complex construction work at the project site to ensure operations run safely, smoothly, and effectively. This position has a wide range of job responsibilities, depending on the area of specialization. These duties might include working on road, bridge, building, steel structures, or other large projects. This position is classified as "safety-sensitive." Essential Functions * Designs temporary structures used during construction with emphasis on safety considerations * Inspects installed equipment and technologies. Solves issues that may arise. * Directs foremen or workers on-site * Conducts research and accurately reports on project status * Performs quality control inspections and checks work for compliance with contract documents * Verifies proper materials are used, and that the installations meet project timelines and requirements * Affirms safety compliance and enforces proper protocols and PPE on site * May oversee project budget and communications Qualifications * A Bachelor's degree in Engineering or closely related field * A minimum of one (1) year of previous experience as a field engineer or similar role * Well-versed in technical aspects of field projects, including machinery, equipment, and construction processes * Thorough understanding of safety guidelines (OSHA statutes) * Attention to detail * Outstanding communication skills * An analytical mind and strong problem-solving ability * Ability to work in adverse weather and occasional overtime and weekends Working Conditions * Travel - This role will be expected to travel to project locations, sometimes nationally * Construction site environment - physical ability to stand, walk, crawl, bend, reach and climb. May be exposed to high noise levels. * Compensation: $55,000-$75,000 Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description General Steel & Supply Co. is the manufacturing division of Fisher Industries that fabricates innovative and high-quality aggregate processing equipment for its subsidiary Fisher Sand & Gravel Co. and companies worldwide. Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** $1000 Sign-On Bonus! * Bonuses Payable following 90 days of employment We have an immediate need for Welders to work for General Steel and Supply Company in Dickinson, ND. POSITION SCOPE The Welder is a safety sensitive position that will perform various welding duties on the manufacturing of new equipment and the refurbishing of heavy equipment in a climate-controlled shop under the direction of the Shop Foreman. Welders work Monday through Friday, 7:00 A.M. to 5:00 P.M. Occasionally, there may be some overnight travel required with this position. PRIMARY DUTIES Basic welding and fabrication duties Assist with checking accuracy and quality of all phases of fabrication Operate basic shop equipment, including shear, press, iron worker, etc. Practice and enforce company's safety policies Read and follow blueprints Maintain records and paperwork for all jobs Work cooperatively with other employees Follow directions of the supervisor Keep the work area clean and organized Perform other duties as assigned REQUIREMENTS Applicants must be at least 18 years old Welding skills with both stick and wire welders required Must be able to read blueprints Experience with machining a plus Occasional overnight travel required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description Join our talent pipeline and be the first to be notified when we have new projects! We are seeking a skilled and safety-conscious Lineman for a Substation role to join our team. This position involves installing, maintaining, and repairing electrical equipment and systems within substations. The successful candidate will work closely with other linemen, engineers, and technicians to ensure the safe and reliable operation of power transmission and distribution systems. Installation & Maintenance: Install, maintain, and repair electrical lines and equipment such as transformers, circuit breakers, switches, and substations. Inspection: Inspect and test substations and electrical equipment to ensure operational safety and functionality. Troubleshooting: Diagnose faults in electrical systems and perform necessary repairs or replacements. Safety & Compliance: Follow all safety guidelines, protocols, and regulatory requirements (OSHA, NESC) while working in substations and on power lines. Emergency Response: Respond to emergency calls, outages, and other critical issues promptly and efficiently. Collaboration: Work alongside other linemen, electricians, engineers, and operations teams to ensure a continuous flow of power. Record Keeping: Maintain accurate records of work performed, equipment installed, and any system maintenance or repairs. Equipment Use: Operate specialized tools and equipment such as aerial lifts, cranes, power drills, and testing devices. Training: Continuously improve skills through training programs, certifications, and on-the-job learning. Requirements Position Qualifications Required: Previous experience in electrical line work or similar field. Ability to work outdoors in various weather conditions and at elevated heights. Strong understanding of electrical safety protocols and regulations. Ability to work varied shifts, including nights and weekends as required. Willingness to travel Previous experience in a substation environment. Preferred: Completion of an accredited training program or apprenticeship in electrical line work. Knowledge of electrical systems and troubleshooting techniques. High school diploma/GED; additional preference given for degree from Vocational, Technical, or Community Colleges or Apprenticeship programs. Key Responsibilities: Installation & Maintenance: Install, maintain, and repair electrical lines and equipment such as transformers, circuit breakers, switches, and substations. Inspection: Inspect and test substations and electrical equipment to ensure operational safety and functionality. Troubleshooting: Diagnose faults in electrical systems and perform necessary repairs or replacements. Safety & Compliance: Follow all safety guidelines, protocols, and regulatory requirements (OSHA, NESC) while working in substations and on power lines. Emergency Response: Respond to emergency calls, outages, and other critical issues promptly and efficiently. Collaboration: Work alongside other linemen, electricians, engineers, and operations teams to ensure a continuous flow of power. Record Keeping: Maintain accurate records of work performed, equipment installed, and any system maintenance or repairs. Equipment Use: Operate specialized tools and equipment such as aerial lifts, cranes, power drills, and testing devices. Training: Continuously improve skills through training programs, certifications, and on-the-job learning. Working Conditions: Hours: Must be available for shifts, weekends, holidays, and on-call work as required. Environment: Outdoor work in all weather conditions; climbing utility poles, working with heavy electrical equipment, and at high altitudes. Travel: Some travel may be required for installations, repairs, or emergency response.

Objective: Follow directions of farm management and protocols to the best of employee's ability for maximum production, efficiency and profit-ability. ESSENTIAL FUNCTIONS Learn and develop individual skills based on work requirements in the employee's designated work area Follow all production protocols and procedures to maximize sow and gilt production & efficiencies Learn specialized skills necessary for smooth work flow Become a skilled employee in animal husbandry to reduce stress of herd and maximize production Follow daily task sheets in the department to achieve production targets Complete production paperwork accurately and timely Communicate effectively with area employees and farm management Follow task sheets and time frames to stay on task and meet time schedules during the workday Give daily input to lead person in area on production and animal health concerns Learn how individual performance affects the finances of the organization and participate with area employees to maximize production and efficiency in areas the employees affect Complete production paperwork accurately and on time Work with farm management to ensure completion of all work-related injury paperwork and participate as necessary in accident investigation Daily recording of monitored production items Bio-Security Adherence Adhere to all bio-security protocols and give input to lead person in area for items out of compliance Work with other team employees in designated area to ensure bio-security audit deficiencies are corrected and brought into compliance in a timely basis Safe Working Environment Follow all safety procedures and guidelines Make sure all safety equipment is in place and utilize equipment as required Learn and utilize accident prevention measures for designated area Consistently monitor animal welfare procedures in designated area Ventilation Controls Be aware of area ventilation system and if it is in good working order Regularly monitor the environment and provide input to lead person in area to achieve optimum comfort for the animals Facility Maintenance The facility must be maintained and well kept Complete routine maintenance as assigned on a daily basis Communicate non-routine repairs to lead in area Keep gestation area clean and organized MARGINAL FUNCTIONS 1. Other duties and projects as assigned by lead person in area and farm management POSITION SPECIFICATIONS Education: High School Diploma or GED Preferred Experience: No Experience Required 1+ Years Livestock Experience with High School Diploma Preferred Training: My Pipestone New Hire Courses Introduction Animal Welfare Biosecurity Employee Handbook PQA Safety Additional Position Related My Pipestone Assigned Monthly Animal Welfare, Biosecurity and Safety Topics Annual Safety Refresher Training Work Environment: Agricultural swine environment in rural area Noise levels that require hearing protection in some areas Gestation, farrowing, and small swine care processes Physical Requirements: Standing, walking and ability to be on feet 8 to 10 hours per day Frequent bending, reaching, squatting and kneeling Frequent use of one or both hands/arms to grasp or pull Frequent lifting of objects weighing 3-20 pounds Occasional bending while pulling and/or lifting objects weighing up to 50 pounds, or requiring up to 50 pounds of force to move Occasional bending while pulling and/or lifting objects weighing up to 100 pounds or requiring up to 100 pounds of force to move with the assistance of another person as needed Ability to communicate effectively both verbally and in writing Must be able to print and/or write legibly Additional Requirements: Must be able to work weekends Must have reliable method of transportation to get to work

Job Description General Steel & Supply Co. is the manufacturing division of Fisher Industries that fabricates innovative and high-quality aggregate processing equipment for its subsidiary Fisher Sand & Gravel Co. and companies worldwide. Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** $1000 Sign-On Bonus! * Bonuses Payable following 90 days of employment POSITION SCOPE The Machinist will perform various duties in preparing parts for assembly of equipment, including operating various machining equipment. This is an hourly position that reports directly to the Machining Foreman. PRIMARY DUTIES Perform various machining and fabrication duties Assist with checking accuracy and quality of all phases of fabrication Operate basic shop equipment, including shear, press, iron worker, etc. Perform prescribed preventative maintenance on machines as required Maintain accurate records and paperwork for projects Contribute to a positive work environment Demonstrate awareness, engagement, and accountability for work results Communicate effectively and appropriately with others in the work environment Adherent to company policies as dictated in the current employee handbook Take an active role in company programs, meetings, and events Perform other duties as assigned REQUIREMENTS High School Diploma or GED Math skills to take precise measurements and make calculations Demonstrated oral and written communication skills Analytical and problem-solving skills to develop effective manufacturing plans based on specifications Problem-solving skills to troubleshoot issues that arise during the manufacturing process Ability to move roughly 50 to 75 lbs. and remain stationery throughout a shift Understanding of health and safety regulations to reduce the risk of workplace accidents Basic knowledge of cutting and welding Able to operate various machining tools efficiently and effectively Technical Capacity Time Management Problem solving/analysis Results Driven Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Senior Insulation Project Manager Vice President, Operations The Project Manager is the customer's primary point of contact and manages the full project lifecycle, from initial project planning phases through completion of construction. Meets with clients, architects, engineers, and other personnel to establish project plans, budgets, and schedules. Essential Functions Manages and leads all elements of the project execution project from award to completion, including monitoring project schedules, work assignments, budgets, & manpower expenditures. Attend bid meetings/job walk to understand all customer requirements, scope of work, and job site conditions. May estimate work and prepare proposals based on information or work with Estimator. Set up project kickoff meeting and contract review with stakeholders. Communicate project requirements and work with the field leadership to define job schedules, work scope, productivity metrics, etc. Executes the change order, documenting the change in scope, and capturing the appropriate cost differences including revenue. Perform continual project reviews with client, company leadership, internal project staff, contracted parties. Establish and maintain communication with the stakeholders and promptly communicate work scope changes and/or issues that may arise to ensure smooth operations through scope of work changes or any issues that may arise. Own KPIs and ensure projects are progressing according to budget through project controls. Responsible for financial health of the project and providing progress updates. Ensure compliance for quality, safety and job executed per customer contract. Provide oversight on project invoicing, such as payroll and T&M sheets. Other duties as assigned. Education & Experience 10+ years of construction management, insulation industrial services experience preferred Bachelor's degree in engineering, construction management, project management or another related field preferred or equivalent experience in industry. PMP or other certifications preferred (not required) Knowledge, Skills, and Abilities Ability to manage and lead cross-functional teams. Ability to interpret contracts; knowledge and understanding of contract language. Deep knowledge in various crafts and technical knowledge. Understanding of project finance and accounting. Excellent interpersonal and communication skills with craftsmen, leadership, customers. Positive, motivating attitude and strong work ethic. Ability to measure KPIs and drive productivity Strong analytical and problem-solving skills Financial and business acumen. Oral and written communication skills. Ability to build collaborative relationships. Customer/client orientation. Ability to identify and seek needed information/research skills. Project scheduling skills. Project management skills. Work Conditions/Physical Demands Remaining in a stationary position, often standing, or sitting for prolonged periods. Work that includes moving objects up to 40 pounds. No adverse environmental conditions expected. Frequent travel may be required as needed

Job DescriptionDescription: Duties/Responsibilities: Professionally communicate with coworkers, vendors, and residents Must possess positive attitude and desire to lead by example Be able to work both independently and as a member of a team Must be organized and able to prioritize Identify and report to management issues involving the employees, property or residents Installing carpet, plank and vinyl flooring May include some light maintenance work Work overtime when needed Lifting up to 50 lbs. and climbing ladders to various heights is required May be asked to assist Supervisor/Manager/ Area Director with other tasks and duties relative to community operations Benefits: Competitive wages within the industry. Health, dental, and vision benefits. Life insurance and AD&D AFLAC 401(k) and 401(k) Roth Allyhealth Tele-Medicine Flexible Spending Accounts Paid Holidays and PTO Time Training and professional development opportunities. Positive and inclusive work environment. Opportunities for career advancement within the company. Princeton Management is an Equal Opportunity Employer Requirements: Applicants should demonstrate strong attention to detail, the capacity to collaborate effectively within a team and independently, excellent communication skills, adept troubleshooting abilities, sound decision-making skills, and the initiative to undertake responsibilities and tackle challenges.

Job Description Responsibilities of the concrete leadman include, but aren't limited to : Set forms Able to finish concrete We offer: • Competitive weekly pay • Health insurance • Paid vacation • Paid holidays • 401k Submit resumes by e-mail to ***************** , mail to P.O. Box 7337, Bismarck, ND 58507-7337, or in person to 1501 East Calgary Avenue, Bismarck, ND. #hc9394