Carpenter jobs in Alabama - 82 jobs

Job Duties & Responsibilities: * Perform general Carpentry work as directed by the Superintendent. Job Requirements: * Minimum 3 years experience as a Carpenter. * Able to comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. * Must have a working knowledge of carpenter techniques and methods. BL Harbert International is an EOE/Vets/Disabilities

The Carpenter is responsible for performing standard to moderately complex tasks involving building, installing, and repairing structures, fixtures and other items using different types of materials including wood and steel. Travel to different job sites is required for this role. Responsibilities: Work with materials such as steel, concrete, wood, plastic, fiberglass or drywall. Plans and performs standard to moderately complex carpentry tasks necessary to construct, erect, install, or repair structures such as door and wall frames; hardware, doors, casework and trim; specialty hardware such as handrails, laminates and door handles. Study specifications in blueprints, sketches, or building plans to determine dimensions and materials required to complete a task. Select and use appropriate hand and power tools and materials required for completion of a job such as; tape, saw, drill, level, chalk box, razor knife, nail puller, nail gun and square or other as necessary. Requirements: High School Diploma, GED or equivalent 1-4 years experience working as a general Carpenter on commercial or industrial projects Experience with various manual and power tools such as but not limited to: tape, square, plumb bob, level, hammer, razor knife, chalk box, tool belt, nail puller, and construction calculator Strong reading, written and verbal communication skills in English, verbal communication in Spanish considered an asset but not required Valid Driver's License Physical Demands and Working Environment: The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Environment: Work is performed primarily in an outdoor setting with exposure to all types of weather and temperature conditions, and travel from site to site. Physical: Primary functions require sufficient physical ability and mobility to work in an office setting and field environment; to walk, stand, and sit for prolonged periods of time; to frequently stoop, bend, kneel, crouch, crawl, climb, reach, twist, grasp, and make repetitive hand movement in the performance of daily duties; to lift, carry, push, and/or pull moderate amounts of weight up to 50 lbs without assistance and greater than 50lbs with assistance; to operate assigned equipment and vehicles; and to verbally communicate to exchange information. Vision: See in the normal visual range with or without correction. Hearing: Hear in the normal audio range with or without correction. EOE - Vets/Disabilities Hoar does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Hoar without a prior written search agreement will be considered unsolicited and the property of Hoar. #AlwaysInProcess #craftprofessionals

Responsibilities Brasfield & Gorrie is currently accepting applications for a Carpenter. Below are the main responsibilities for this position. ) * Build rough wooden structures, such as vertical and horizontal concrete forms, gang forms, blocking, Johnny clamp forms, scaffolds, tunnel, bridge, or sewer supports, billboard signs, and temporary frame shelters, according to sketches, blueprints, or oral instructions * Must adhere to safety protocol, and work in a drug-free environment * Must be able to provide own tools including, but not limited to, hammer, speed square, tape measure, chalk box, pliers, and tool pouch. * May be required to work in outside all weather conditions Education - Skills - Knowledge - Qualifications & Experience * 3 years Commercial Construction Carpenter experience preferred. Experience with vertical and horizontal concrete forms, and gang forms preferred * Must be able to work at elevated heights, frequently lift materials weighing up to 50lbs and work in outside all weather conditions EOE/Vets/Disabilities

SUMMARY Helpers (includes helpers 0 months- helper 42 months) - Preferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. Local Chemical facility located in Theodore, AL is currently looking for a Carpenter. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES - Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. - Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. - Selects, loads, and hauls job material to work site. - Prepares layout of form or fixture to be fabricated using lines or grades. - Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. - Verifies accuracy of structure with transit, plumb bob, square and level. - Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. - Nails cleats (braces) across boards to construct concrete-supporting forms. - Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. - Erects frame work for structures and lays sub-flooring. - Cuts and assembles timbers to build trestles and cofferdams. - Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. - Constructs forms, chutes, and aligns form panels for pouring concrete and grout. - Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. - Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. Work Schedule: Mon - Thur 6:30 a.m. - 5:00 p.m. (some overtime will be required) Pay Range: $23.03 - $27.43

Job DescriptionJob Title: Marine Carpenter Job Type: Full-Time Pay Range: $20 - $30 p/h We are seeking a Marine Carpenter to join our Craft Department team. The ideal candidate will have a strong background in refined woodworking and marine carpentry. This role is responsible for a variety of interior and exterior refit and repair projects on vessels up to 120 ft. Responsibilities: • Furniture and cabinet construction and installation • Deck repair and new deck installation • Fitting of interior appliances • Veneer installation and finish • Conduct thorough assessment prior to starting a job including acknowledging the budgeted time • Assign parts and purchases to the appropriate vessel/tickets • Record time worked per job order into timekeeping system • Maintain a clean and organized work environment to promote safety and efficiency • Flexibility in work assignments that may include crossover into areas within crafts such as paint and fiberglass Education and/or Work Experiences Requirements: • High school diploma or GED required • Valid Driver's license • Pass a background check, pre-employment physical and drug screen. • Familiarity with exotic woods such as teak, holly, and mahogany • Strong understanding of marine construction techniques and materials • Ability to read technical drawings and specifications • Proficiency in a wide range of carpentry tools and equipment and must possess own hand tools • Excellent attention to detail and commitment to quality craftsmanship. • Ability to work collaboratively in a team environment. • Must be able to lift heavy materials, stand for extended periods during work hours, and climb up and down stairs and scaffold on land and on a vessel Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: • Industry Leading Pay • Medical Coverage • Dental Coverage • Vision Coverage • Short Term Disability Benefits • Term Life Benefits • Referral Bonuses Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker's compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Champion Window is seeking for a Carpenter / Measure Technician As a Carpenter / Measure Technician, you will responsible for accurately measuring the customer's home for installations and being responsible for completing service jobs to ensure customer satisfaction. Why Champion? Highly competitive pay Robust benefit package- full-time W-2 position, health, dental and disability insurance, flexible spending account, 401K, paid vacation, holidays and much more Culture focused- community involvement, employee incentives/rewards and much more Opportunity to grow in a national 60-year-old company who designs, builds, installs & guarantees it! Company provided truck, tools & gas card Responsibilities Measures for products at customer homes Repairs windows, siding, and sunrooms Order and tracks repair / installation services Assist Management reporting and communication, as requested Interacts with homeowners to service their home-improvement needs Safely performs all aspects of job in compliance with all federal, state & local laws Qualifications High School diploma or GED preferred, construction trade school a plus 3 to 5 years in home improvement / construction involving carpentry, roofing & window installation Experience in the use of a brake, and other hand tools such as a utility knife, hammer, deglazing tools, etc. required Excellent written and verbal communication skills Math skills including using a tape measure and angles Clean driving record and valid driver's license Champion Window is an Equal Employment Opportunity Employer If you need assistance with completing the online application due to a disability, please contact Champion Window. Today & Every Day, CHAMPION Thanks Our Veterans! Now Hiring and Honoring Veterans. Apply today to find your next challenging career. #INDO Also, we offer a competitive compensation package that includes medical/dental/vision/disability coverage, 401(k), flex spending account and more.

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group, LLC has an opening for a Civil Carpenter to join our Team in the Decatur, AL area. The Civil Carpenter will be responsible for constructing, erecting, installing, fabricating, dismantling and repairing structures, formwork and fixtures of wood, metal forms and associated accessories. Essential Qualifications: High school or equivalent One (1) to four (4) years of experience in specified skill (depending on mechanic level) Basic knowledge of hand tools and power tools NCCER certification may be required at some job sites Written pre-employment qualification test Post-offer drug/alcohol screen and physical evaluation Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health and safety of others in the workplace Functional Requirements: Studies blueprints, sketches or structural plans for information pertaining to the type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated, Selects specific types of lumber or other materials, Prepares layouts including lines and grades, Marks cutting and assembly lines on materials, Shapes materials to prescribed measurements, Assembles cut and shaped materials and fastens them together, Erects framework for structures and lays sub-flooring, Builds stairs and lays out and installs partitions and cabinet work, Covers subfloor with building paper to keep out moisture and lays hardwood, parquet, and wood-strip-block floors, Fits and installs prefabricated window frames, doors, door frames, weather stripping, interior and exterior trim, and finishes hardware such as locks, letter drops and kick plates, Constructs forms and chutes for pouring concrete, Erects temporary platforms, steps, and ladders for assembling structures below ground, at ground level or above ground level, Fabricates formwork then loads, hauls, and carries it to the job site and installs per drawings, sketches, or plans, Places and finishes concrete in formwork and sets and aligns form panels, Sets grout forms for epoxy and cement grout, Perform additional assignments per supervisor's direction. Tools/Equipment: Employee may be required to provide the following: tool box, claw hammer, hand saw, framing square, level, tri square, torpedo level, measuring tape, nail pouch, plumb bob, gloves, nail bar, chalk box, tie wire pliers, hack-saw, pliers or vise grips, screw drivers, wood chisels, folding ruler or tape, crescent wrench, scaffold socket wrench and combination wrench, rain suit. Compensation: Final agreed upon compensation is based upon individual qualifications and experience. Benefits: Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing /data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Job Posted by ApplicantPro

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost efficiency. **Civil Carpenter** 3-5 years of industrial or heavy civil carpentry experience. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job DescriptionTo meet the demands of our rapidly growing base of satisfied customers, Handyman Connection of Metro Vancouver, BC is seeking an experienced carpenter. This skilled craftsman would ideally have a variety of home improvement skills to support the growth of our business. Handyman Connection is a locally owned and operated, well established Home Improvement Company dedicated to excellent customer service and quality work. Our customers love us! We have over 50% repeat/referral customer base and our business is growing! What You Will Receive Receiving constant leads that can be scheduled based on your availability Professional Office Support - scheduling, customer support, job tracking Free access to custom mobile application for scheduling and communications Successful marketing campaign that brings us well qualified customers Responsibilities The Carpenter performs and coordinates the cutting, shaping and installation of building materials during the construction, remodeling or repair in a residential and light commercial setting. You must have experience as a residential carpenter, and you must have a positive attitude. Constructing, installing, and repairing structures and fixtures of various types of wood, plywood and wallboard. Ability to determine and clearly identify proper materials and material quantities for new and existing projects. Evaluate customer requests, price projects, troubleshoot customer issues, and present a description of a work order to a customer. Requirements Must have current Driver's License and submit to a background check Must have tools, vehicle and good references Must have experience in the remodeling or home repair trades Must pass screening process Independent Contractors must carry liability insurance and workers comp Must have a smart phone and access to the internet Please complete the short application, and we will contact you for a quick conversation to see if this could be the right match for you. Check out our website at: **************************

Job Description We're a local builder hiring a detail-oriented and skilled carpenter to join our team. The work involves woodworking, framing, decking, reading blueprints, and any other tasks needed or directed by the project manager. Job seekers should take pride in their work, show up every day with a positive attitude, and enjoy working on a construction project. If you're looking for a job with good pay, steady hours, and the ability to work with your hands, start your application today. Compensation: $22 - $25 hourly Responsibilities: Review blueprints and sketches to understand requirements Measure, cut, and install components of decks and patio covers Prefabricate pergolas and pavilion components Dig and install concrete foundations Work safely and maintain a safe environment Cooperate and collaborate with team members Work with attention to detail and speed while following directions Qualifications: A high school diploma or GED is preferred Great physical condition and dexterity Strong measuring and math skills required Candidate must have successfully completed a carpentry apprenticeship Valid driver's license required About Company At Red Branch Outdoor Living, we don't just build decks and patios - we create spaces where people live, connect, and make memories. Joining our team means more than a job; it's a chance to solve challenges , take ownership, and grow with a company that's raising the standard in residential construction . We're looking for problem-solvers with positive attitudes who want to build something real, not sit behind a desk all day. In return, we offer: Paid Holidays PTO Access to Health, Vision, and Dental Insurance Plus Opportunities to Advance As We Grow If you want meaningful work, a supportive team culture, and the satisfaction of seeing craftsmanship come to life, Red Branch Outdoor Living is the place to do it. Let's build something great - together.

A Carpenter Journeyman constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and patent-type form systems using hand tools and power tools within tolerances that conform to drawings and specifications, as well as directing and training Carpenter helpers to do the same. Overview of Primary Duties: Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. Measures boards, timbers, or plywood using a square, measuring tape, and ruler and marks cutting lines on materials using a pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. Operation of electric and pneumatic tools. Selects, loads, and hauls job material to the work site. Measures boards, timbers, or plywood using a square, measuring tape, and ruler and marks cutting lines on materials using a pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes Demonstrate Yates Core Values and Principles Follow Yates Code of Conduct Safety Responsibilities and Expectations Responsible for refusing unsafe work and for carrying out all work by the established Yates Safety Procedures and Work Practices Report all incidents, near hits, and hazards to management. Required to wear and maintain personal PPE. Advise fellow employees of hazardous situations. Participate in workplace inspections. Comply with statutory requirements, including duty of care. Participate in required and assigned training. Provide suggestions to improve Safety. Present a mature approach to working safely. Attend prestart and Safety meetings and contribute. Other related duties as needed and assigned by Field Supervision. This is not an all-inclusive list of tasks an employee may be asked to do. Employees are expected to complete any tasks they are assigned. Qualifications: Level III: Four (4) + years of heavy industrial-related carpenter experience NCCER Carpenter journeyman certification Level II: Four (4) + years of heavy industrial-related carpenter experience NCCER Performance Carpenter journeyman verification Other verified experiences or certifications with carpenter experience Level I: Four (4) + years of heavy industrial-related carpenter experience Requirements: Must have the ability to read and interpret instructions and documentation Personal hand tools required for craft as established on the Yates Industrial Minimum Tool List Successful completion of required Safety training to include, but not limited to, Confined Space, LOTO, and Working at Heights Physical Demands/Essential Job Functions: This job description reflects an assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. This is not an all-inclusive list of functions that an employee may be asked to do. Employees are expected to complete any tasks they are assigned. Physical requirements for this role may include but are not limited to: All weather conditions at varying temperatures Work at varying elevations Will work in windy and dusty environments Moderate to high noise levels The project site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment, and tools Ability to hear bells, whistles, and alarms Required to wear safety-approved body harnesses when working at 4 or above Required to adhere to large amounts of standing, walking, bending, squatting, climbing, and lifting Ability to talk and hear to communicate Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls, and tools Must be able to lift, carry, and move heavy objects up to 25 lbs. Will use vision abilities to focus, see short and long distances, colors, depth perception, and peripheral vision About Yates Construction Ranked among the top commercial and industrial construction companies in the country by Engineering News-Record , Yates Construction is family-owned. It provides a wide range of construction and building services. Incorporated in 1964 by William G. Yates Jr., we have steadily grown to become one of the nation's top commercial and industrial construction companies. We are financially sound, with a significant bonding capacity and vast personnel and equipment resources. Our portfolio includes commercial and industrial projects from various sectors, including arts and culture, civil, commercial, education, entertainment and gaming, federal, healthcare, hospitality, manufacturing, municipal, retail, and technology. We work hard to understand our client's business needs and continually look for opportunities to add value to them and their projects. Our client relationships are the foundation of our success, and our primary goal is to help each client achieve their vision. We do this by carefully managing the details and complexities of each project and communicating constantly with all team members. Yates Construction is a military-friendly employer and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics, in addition to federal and state law requirements. Yates complies with applicable state and local laws governing nondiscrimination in employment in every location where the company has facilities.

Champion Window is seeking for a Carpenter / Measure Technician As a Carpenter / Measure Technician, you will responsible for accurately measuring the customer's home for installations and being responsible for completing service jobs to ensure customer satisfaction. Why Champion? * Highly competitive pay * Robust benefit package- full-time W-2 position, health, dental and disability insurance, flexible spending account, 401K, paid vacation, holidays and much more * Culture focused- community involvement, employee incentives/rewards and much more * Opportunity to grow in a national 60-year-old company who designs, builds, installs & guarantees it! * Company provided truck, tools & gas card Responsibilities * Measures for products at customer homes * Repairs windows, siding, and sunrooms * Order and tracks repair / installation services * Assist Management reporting and communication, as requested * Interacts with homeowners to service their home-improvement needs * Safely performs all aspects of job in compliance with all federal, state & local laws Qualifications * High School diploma or GED preferred, construction trade school a plus * 3 to 5 years in home improvement / construction involving carpentry, roofing & window installation * Experience in the use of a brake, and other hand tools such as a utility knife, hammer, deglazing tools, etc. required * Excellent written and verbal communication skills * Math skills including using a tape measure and angles * Clean driving record and valid driver's license Champion Window is an Equal Employment Opportunity Employer If you need assistance with completing the online application due to a disability, please contact Champion Window. Today & Every Day, CHAMPION Thanks Our Veterans! Now Hiring and Honoring Veterans. Apply today to find your next challenging career. #INDO Also, we offer a competitive compensation package that includes medical/dental/vision/disability coverage, 401(k), flex spending account and more.

Job DescriptionFRAME CARPENTER Installs foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials. Fits and installs window frames, doors, door frames, door hardware, interior and exterior trim using a carpenter's level, plumb bob, and laser levels. Erects scaffolding and ladders for assembling structures above ground levels. Studies specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required. Shapes or cuts materials to specified measurements, using hand tools, machines, or power saws. Follows established safety rules and regulations and maintaining a safe and clean environment. Builds or repairs cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, hand tools, or power tools. Assembles and fastens materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue. Removes damaged or defective parts or sections of structures and repair or replace, using hand tools. Inspects ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures. Moves necessary materials around jobsite as assigned. Cleans up worksite debris. MUST HAVE PREVIOUS CAPENTRY SKILLS!!! TEMP TO PERM HIRING, MUST HAVE OWN PPE AND OWN TRANSPORTATION.

Job Title: Carpenter - commercial and industrial setting Pay: $22-$28 per hour DOE (no per diem) About the Role: We're looking for an experienced Carpenter skilled in commercial and/or industrial settings. The ideal candidate will have strong attention to detail, reliable work habits, and the ability to work safely and efficiently with minimal supervision. Responsibilities: Perform general carpentry duties such as cutting, fitting, assembling, and installing wood structures and fixtures Read and follow basic drawings or instructions Use hand and power tools safely and effectively Maintain a clean and organized work area Work efficiently to complete assigned tasks within the project timeline Requirements: Proven experience as a commercial carpenter Must have basic tools and PPE Reliable transportation to and from the job site Ability to work independently or as part of a small crew Commitment to safety and quality workmanship Compensation: Competitive hourly rate Paid upon project completion If you're dependable, detail-oriented, and available for a quick project, we'd like to hear from you. 👉 To Apply: Send your name, contact info, brief experience summary, and availability to *****************************

The Finish Carpenter is responsible for analyzing shop drawings to fabricate custom woodworking products. The focus of this job is on producing high quality, detailed work based on established standards, guidelines and procedures. Precise, consistent work output is essential requiring patience and a willingness to handle and complete one task at a time. The job environment is stable, based on known relationships with people and well-defined processes. Job knowledge and competency is built through structured step-by-step training and positive, supportive coaching from management and peers. Communication with others is based on knowledge of repetitive job routines and procedures gained from sufficient on the job experience. Consistent, error free work based on defined regulations and standards are key measures of job performance success. The job environment promotes steady, methodical work output so that job routines can be completed on time and error-free. This position is designed to develop a valued technical expert, who, recognized and supported by management and a stable work environment, can deliver quality work on a consistent basis. Job Characteristics Steady, even pace to promote accuracy and quality of work Repetitive routines Complete set of procedures and tasks completed before new ones are begun Technical/analytical focus Work within established systems, standards, and procedures Communication based on job knowledge and expertise Decision-making within clearly defined job scope Based on defined policies and procedures Supported by management Focused on job knowledge and expertise Helpful, supportive communication with management and peers Collaborative approach in structured job environment Leadership focused on consistent, accurate, quality work output Supportive, non-threatening leadership style Delegation to others when appropriate, using training, coaching and on the job experience Job Duties & Responsibilities Fabrication and final assembly of custom products (finished goods) within the woodworking industry. Custom products and specific job duties & responsibilities to include but not limited to: Finish Carpenter 1 Custom countertops Custom plastic laminate items Competent use of production tools & machinery Requires supervision Work productivity at average or below average pace Finish Carpenter 2 Items included in Finish Carpenter 1 Custom desks (reception desks, nurse stations) Custom benches, banquettes, etc. Face frames Other moderately complex custom woodworking products Work productivity is average Work quality is average Finish Carpenter 3 Items included in Finish Carpenter 1 & 2 Advance knowledge of finish carpentry and custom woodwork assembly Other complex custom woodworking products High level of competency for custom work Requires some supervision Work productivity is above average Work quality is above average Finish Carpenter 4 Items included in Finish Carpenter 1, 2, & 3 Expert knowledge of finish carpentry and custom woodwork assembly Advance and complex custom woodworking product Requires minimal supervision Work productivity is excellent Work quality exceeds expectations Individual is reliable and without attendance issues (Occurrences consistently remain below 6) Keeps work area clean and free of debris Keeps work area organized Attention to detail is required Education High School diploma, GED, or higher is required Relevant experience can be considered as an equivalent to a degree Experience Three or more years' experience within the woodworking, manufacturing, or construction industry is preferred Three or more years' experience in Finish Carpentry is preferred Computer Requirements Time tracking software - Innergy Shop drawing software - Innergy Material requisition software - Innergy Language & Mathematical Skills Ability to effectively present information, questions, or discrepancies to Team Leader for resolution Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; mentally, hand-and-paper, and calculator. Monday - Thursday 6:30am - 5:00pm Overtime may be required on Friday and/or Saturday 6:30am - 3:00pm

Responsibilities: Maintain a clean and safe work site by cleaning work areas, machines, and equipment. Perform inspections on tools and equipment to ensure they are in proper, safe working order. Perform maintenance as needed. Construction and installation of concrete forms and bracing materials. Pour and finish concrete. Ability to measure and cut materials to required size for installation. Ability to install framing, wall covering materials including installation and finishing of sheetrock, and finishing trim work. Ability to determine paint types and apply per specifications, including brush and roller applications with minor spraying abilities. Qualifications: At least three (3) years' experience in the construction industry. Familiarity with common construction trade tools, including use, safety standards, and maintenance. Thorough comprehension of construction related mathematical skills, including fractional functions. Ability to read, understand, and interpret blueprints. Heavy Equipment operating experience a plus (Skid, Trackhoe, and Backhoe). Must be able to lift up to 100 pounds unassisted. Light mechanical experience a plus. Proficiency in using finishing tools and equipment. Ability to work independently with minimal supervision. Excellent attention to detail and quality control. Ability to interpret and follow technical plans and specifications. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Medical, Dental & Vision Insurance Available Company Paid Life Insurance Short-Term Disability Paid Time Off Matching 401K Holiday Pay

SUMMARY Helpers (includes helpers 0 months- helper 42 months) - Preferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. Local Chemical facility located in Theodore, AL is currently looking for a Carpenter. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. Work Schedule: Mon - Thur 6:30 a.m. - 5:00 p.m. (some overtime will be required) Pay Range: $23.03 - $27.43 JOB REQUIREMENTS * Work within precise standards of accuracy. * Rate information using standards which can be measured or checked. * Compare and see differences in the size, shape and form of lines, figures and objects. * Observe flat drawings or diagrams and understand how they would look as solid objects. * Apply basic mathematical skills. * Follow oral and written directions. * Work at heights without fear. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 70% Walking 20% Sitting 10% b. Lifting 40 lb. Carrying 40 lb. Pushing NP Pulling NP 2. Climbing F Balancing F 3. Stooping F Kneeling O Crouching F Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group, LLC has an opening for a Civil Carpenter to join our Team in the Decatur, AL area. The Civil Carpenter will be responsible for constructing, erecting, installing, fabricating, dismantling and repairing structures, formwork and fixtures of wood, metal forms and associated accessories. Essential Qualifications: * High school or equivalent * One (1) to four (4) years of experience in specified skill (depending on mechanic level) * Basic knowledge of hand tools and power tools * NCCER certification may be required at some job sites * Written pre-employment qualification test * Post-offer drug/alcohol screen and physical evaluation * Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) * Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) * Applicant/employee must not pose a direct threat to the health and safety of others in the workplace Functional Requirements: Studies blueprints, sketches or structural plans for information pertaining to the type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated, Selects specific types of lumber or other materials, Prepares layouts including lines and grades, Marks cutting and assembly lines on materials, Shapes materials to prescribed measurements, Assembles cut and shaped materials and fastens them together, Erects framework for structures and lays sub-flooring, Builds stairs and lays out and installs partitions and cabinet work, Covers subfloor with building paper to keep out moisture and lays hardwood, parquet, and wood-strip-block floors, Fits and installs prefabricated window frames, doors, door frames, weather stripping, interior and exterior trim, and finishes hardware such as locks, letter drops and kick plates, Constructs forms and chutes for pouring concrete, Erects temporary platforms, steps, and ladders for assembling structures below ground, at ground level or above ground level, Fabricates formwork then loads, hauls, and carries it to the job site and installs per drawings, sketches, or plans, Places and finishes concrete in formwork and sets and aligns form panels, Sets grout forms for epoxy and cement grout, Perform additional assignments per supervisor's direction. Tools/Equipment: Employee may be required to provide the following: tool box, claw hammer, hand saw, framing square, level, tri square, torpedo level, measuring tape, nail pouch, plumb bob, gloves, nail bar, chalk box, tie wire pliers, hack-saw, pliers or vise grips, screw drivers, wood chisels, folding ruler or tape, crescent wrench, scaffold socket wrench and combination wrench, rain suit. Compensation: Final agreed upon compensation is based upon individual qualifications and experience. Benefits: Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; typing /data entry; stepstool use; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

Responsibilities: Maintain a clean and safe work site by cleaning work areas, machines, and equipment. Perform inspections on tools and equipment to ensure they are in proper, safe working order. Perform maintenance as needed. Construction and installation of concrete forms and bracing materials. Pour and finish concrete. Ability to measure and cut materials to required size for installation. Ability to install framing, wall covering materials including installation and finishing of sheetrock, and finishing trim work. Ability to determine paint types and apply per specifications, including brush and roller applications with minor spraying abilities. Qualifications: At least three (3) years experience in the construction industry. Familiarity with common construction trade tools, including use, safety standards, and maintenance. Thorough comprehension of construction related mathematical skills, including fractional functions. Ability to read, understand, and interpret blueprints. Heavy Equipment operating experience a plus (Skid, Trackhoe, and Backhoe). Must be able to lift up to 100 pounds unassisted. Light mechanical experience a plus. Proficiency in using finishing tools and equipment. Ability to work independently with minimal supervision. Excellent attention to detail and quality control. Ability to interpret and follow technical plans and specifications. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Medical, Dental & Vision Insurance Available Company Paid Life Insurance Short-Term Disability Paid Time Off Matching 401K Holiday Pay