Senior Electrical Engineer jobs at Carrier - 9083 jobs

Under direction, perform varied professional and electrical engineering work at an advanced level of difficulty in the field and office. Perform assessments of and prepare written reports documenting the existing electrical systems and loads at existing facilities. Work with other engineers and technicians on design of new facilities and rehabilitation/retrofit of existing facilities. May supervise subordinate engineering personnel engaged in design and construction work. May act as resident engineer on major capital improvement projects and as oversight engineer on in-house maintenance and repair projects. Interpret, explain and carry out electrical engineering design, inspection and construction methods and procedures. Responsibilities include regular contact with other professional engineering personnel, as well as contractors and their representatives, and the general public, obtaining and providing technical electrical engineering data and information, preparing, checking and reviewing detailed and complex electrical engineering plans, specifications and related reports. Perform related duties as required. Essential Responsibilities Performs assessments of electrical systems and prepare written reports documenting the capacity and limitations of the systems Performs detailed engineering calculations and analysis in connection with electrical design of utility systems for transportation facilities Prepares and supervises the preparation of detailed electrical engineering designs, drawings, specifications, cost estimates and quantity estimates for a wide range of electrical construction and maintenance projects Works with other in-house and consultant engineering professionals and technicians to develop, prepare and finalize complete sets of construction bid documents for capital improvement and other construction projects Reviews consultants submittals and work products to ensure compliance with required scope of work and deliverables Reviews contractors' work to ensure compliance with plans and specifications Plans, schedules and coordinates detailed phases of engineering work either as part of a major project or for an entire project of smaller scope Makes investigations of contractual and construction problems that may arise on construction projects Inspects and supervises a wide variety of ordinary and complex construction projects to ensure compliance with contract plans and specifications Assists in the preparation of complex contract documents Conducts correspondence and prepare technical engineering reports in connection with a wide variety of projects Knows and follows the safety and health rules and safe working practices applicable to their job Ensures that employees under their supervision follow established safe work practices and obey all safety rules Meets and consults with department officials, engineers and contractors on technical engineering matters Regular and reliable performance and attendance are required Senior Electrical Engineer | Job Details tab | Career Pages #J-18808-Ljbffr

Site Supervisor (MEP) Location: Data Center and Commercial sites - United States - Travel will be required across all states. Employment Type: Full-time / Contract Salary: $55,000 - $95,000 + package A leading data center construction and engineering organization is seeking a skilled and motivated Site Supervisor to oversee building or mechanical/electrical (MEP) activities within critical data center environments. The successful candidate will ensure that all on-site construction, maintenance, and repair operations are executed safely, efficiently, and in full compliance with established procedures and industry standards. This position requires a strong understanding of data center systems, excellent organizational skills, and the ability to lead diverse teams in high-performance environments. Key Responsibilities Supervise and coordinate all on-site activities related to building construction or MEP systems, depending on area of specialization. Enforce adherence to safety, security, and operational protocols within live data center environments. Manage and oversee subcontractors, ensuring quality work, safety compliance, and schedule adherence. Conduct regular site inspections to identify and mitigate potential hazards, risks, or compliance issues. Maintain detailed records and documentation, including permits, inspections, and safety logs. Collaborate closely with data center operations teams to minimize downtime and avoid disruption to critical infrastructure. Communicate effectively with project managers, engineers, and stakeholders to align on project goals and deliverables. Diagnose and resolve technical issues promptly to maintain project continuity. Ensure all work complies with relevant building codes, regulations, and industry best practices (e.g., NFPA, OSHA). Participate in pre-construction planning, offering insights on constructability, risk, and scheduling. Skills & Qualifications Proven experience supervising building construction or MEP projects; data center experience is a plus. Strong understanding of data center operations and critical infrastructure systems. Excellent knowledge of safety regulations, building codes, and industry standards. Demonstrated ability to lead subcontractors, manage resources, and maintain timelines. Strong communication, leadership, and problem-solving abilities. Proficiency in reading and interpreting technical drawings, blueprints, and schematics. Competent in Microsoft Office Suite and project management software. OSHA certification preferred.

Cannon Corp Description: You'll Come for a Job But You'll Stay for an Exciting Career! Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a CIVIL SENIOR PRINCIPAL ENGINEER to grow and shape Cannon's Water Resource operations in Orange County, based in our IRVINE office . Irvine offers warm weather, beautiful scenery, and is a top bicycling city with miles of on-road bicycle lanes and mountain bike trails. It is one of the safest communities and the public schools have consistently ranked among the best in California. PROJECTS INCLUDE Wastewater Treatment Facilities, Collection Facilities, Water Distribution Systems, Water Treatment Plants, Storm Drainage Collection Systems and Facilities, Water Main Replacements, Potable Water Pump Stations and Reservoirs. CIVIL SENIOR PRINCIPAL ENGINEER JOB SUMMARY The Civil Senior Principal Engineer role is a leadership opportunity to grow and Cannon's Water Resources operations in Orange County. Reporting to the Director of Water Resources, this role will conduct and drive business development efforts with Orange County agencies and clients; oversee and manage a diverse portfolio of wastewater, water treatment, and other water resource projects; mentor engineers; and provide excellent client service and delivery. CIVIL SENIOR PRINCIPAL ENGINEER JOB DUTIES Responsible for securing new work by establishing and fostering client relations and developing proposals (scope, schedule, and fee estimates). Develops and maintains strong relationships with ongoing clients and actively seeks to expand services to them. Concurrently manages a variety of civil engineering Public Works-Water Resources projects. Tracks project scope, budgets, and schedules to ensure fulfillment of contract commitments and profitability. Primary interface with clients on project coordination and design and follow-up to ensure quality standards are met, efficiency levels are maintained, and client satisfaction, respect, and confidence are assured. Effectively manages quality assurance and quality control. Uses technical knowledge to prepare PSandE for water resources projects, including water, sewer, and storm drains (pipelines, pump stations, lift stations, storage reservoirs, etc.). Grows, leads, and mentors an Orange County Water Resources team. Directs and mentors project engineers and design engineers on technical matters and procedures and acts as a technical resource to staff. Regularly engages in professional/community activities that promote the Cannon brand (writing, speaking, etc.). Requirements: Requires a Bachelor's degree in Civil Engineering from an accredited college. Requires a minimum of 15 years' experience in Civil Engineering specifically pertaining to Public Works/Water Resources projects. Requires minimum 8 years of project management experience pertaining to Public Works/Water Resources projects. Requires a California P.E. license. Working knowledge of typical computer software programs used in civil engineering design (AutoCAD, Civil3D, Hydrology and Hydraulic, AES, WSPG, Flowmaster, etc.) Must be proficient with MS Office Suite. A proven track record and strong desire to provide superior client service and delivery. Proven ability to manage multiple projects and deliver on time within budget. Experience in staff management, mentoring and resource management a plus. WE OFFER competitive salaries, excellent benefits package, remote work flexibility, and an active and positive team building, work environment. Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Compensation details: 00 Yearly Salary PIaa1ed-1949

A professional engineering organization is looking for a Senior Electrical Engineer in San Francisco to perform advanced electrical engineering work, including assessments, design, and compliance reviews for various projects. The candidate will lead projects, supervise engineering personnel, and ensure adherence to safety standards and best practices. This role requires a licensed Professional Engineer and entails significant collaboration with contractors and other engineering professionals. Relevant experience in utility systems and project management is essential. #J-18808-Ljbffr

At I.C. Thomasson Associates, Inc, A Salas O'Brien Company we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: The ideal candidate to fill this position is an Electrical Engineer that is competent and confident in his/her abilities as an electrical engineer, especially with experience in commercial work. This person would be a Project Manager of multiple projects, work with an internal MEP/FP team to deliver projects that meet the objectives of the architect/owner. Business Development acumen is important, so understanding business development is a plus and opens many avenues for advancement. These activities may include developing an action plan to solicit and secure new work, implementation of goals, objectives, and priorities for the Nashville office, identifying prospective markets and clients, etc. Responsibilities: Knowledge of electrical engineering principles in the field of building construction. Capable of increasing technical competency with experience and work ethic. Ability to effectively communicate with architects, owners and contractors. Ability to work well independently and as part of a strong team. Excellent organization and time management skills . ICT encourages the growth of all our engineers to take a more responsible and leadership role based on experience. Qualifications: B.S. in Electrical Engineering 7+ years of work experience with complex building electrical systems in the commercial and institutional sector. Registered Professional Engineer, with Tennessee P.E. license, or ability to obtain a Tennessee P.E. license. Experience with Revit Excellent written and oral communication skills essential for team-based projects. Excellent planning and organizational skills required for simultaneous project schedules. Highly motivated, proactive and willing to take on new challenges. Willing to travel. Benefits: Gain invaluable industry experience and practical engineering skills. Work with a diverse team of professionals, fostering networking opportunities. Access to mentorship and guidance from experienced engineers. Competitive compensation package. Location: Nashville, TN Travel: Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

A leading engineering firm in San Francisco seeks an Electrical Engineering New Grad. This entry-level role offers experience in designing electrical systems and collaborating with clients. You will use tools like AutoCAD and Revit under mentorship from experienced engineers. Ideal candidates will have a BS in Electrical Engineering and strong analytical skills. The position offers a competitive salary range of $81,000 - $85,000 and comprehensive benefits, promoting career growth and development in a supportive environment. #J-18808-Ljbffr

Altera .Design Verification page is loaded## Design Verificationlocations: San Jose, California, United Statestime type: Full timeposted on: Posted Yesterdayjob requisition id: R01697# **Job Details:**### ## **Job Description:**Altera is a leading FPGA (Field-Programmable Gate Array) company that delivers programmable hardware, software, and development tools to drive innovation from cloud to edge. With over four decades of experience in programmable logic, our broad portfolio includes FPGAs, CPLDs, IP, SmartNICs, IPUs, and System on Modules-supported by industry-leading tools like the Quartus development suite.Recently re-established as an independent business (with Intel retaining a minority interest), Altera is focused on accelerating programmable compute in AI, networking, communications, industrial, automotive, aerospace/military, and edge-computing domains.Our mission is to provide leadership programmable solutions that are easy to design and deploy, and our vision is to pioneer innovation that unlocks extraordinary possibilities.We are seeking a Sr Silicon Design Verification Engineer (on-site) who can perform the following functions* Performs functional logic verification at multiple levels ( block, subsystem and full chip )* Defines and develops scalable and reusable block, subsystem, and SoC verification plans, test benches, and the verification environment to meet the required level of coverage and confirm to microarchitecture specifications.* Executes verification plans and defines and runs emulation and system simulation models to verify the design, analyze power and performance, and uncover bugs.* Replicates, root causes, and debugs issues in the pre-silicon environment. Finds and implements corrective measures to resolve failing tests.* Collaborates and communicates with Architects, micro architects, full chip architects, RTL developers, post silicon, and physical design teams to improve verification of complex architectural and microarchitectural features.* Documents test plans and drives technical reviews of plans and proofs with design and architecture teams.* Incorporates and executes security activities within test plans, including regression and debug tests, to ensure security coverage.* Maintains and improves existing functional verification infrastructure and methodology.* Absorbs learning from post-silicon on the quality of validation done during pre-silicon development, updates test plan for missing coverages, and proliferates to future products### ## **Qualifications:**Minimal Qualification:* Candidate should have a BS, MS or PhD in Electrical or Computer Science Engineering or related field with 3-5+ years of technical experience.* Validation/Verification. Related technical experience should be in/with: Pre Silicon* OVM/UVM, System Verilog, constrained random verification methodologies. Preferred Qualification* Design Verification with developing, maintaining, and executing complex IPs and/or SOCs.* The complete verification life cycle (verification architecture, test plan, execution, debug, coverage closure).* Developing validation test suites and driving continuous improvement into existing validation test suites and methodologies.* Scripting experience with TCL/PERL/Python etc.,* Formal verification experience,* Experience in either Ethernet / PCIe / MACSEC / IPSEC protocols & FPGA architecture or FPGA prototyping### ## **Job Type:**Regular### ## **Shift:**Shift 1 (United States of America)### ## **Primary Location:**San Jose, California, United States### ## **Additional Locations:**### ## **Posting Statement:**All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. #J-18808-Ljbffr

We are seeking a highly skilled and innovative Electrical Engineer to join our dynamic team. In this role, you will be responsible for designing, developing, and testing electrical systems that meet project specifications. The ideal candidate will possess a strong foundation in electrical engineering principles, complemented by expertise software such as AutoCAD, MEP, Navisworks and Revit. This position offers an opportunity to work with a collaborative team in a company with outstanding benefits. Duties Design and develop electrical systems, schematics, and PCB layouts using AutoCAD, Revit, and CAD software to meet project requirements. Conduct root cause analysis on electrical failures or system malfunctions to identify issues and develop corrective actions. Collaborate with architects, structural, and MEP trades t identify and resolve spatial conflicts using clash detection tools. Develop project schedules ensuring timely delivery of milestones while managing resource allocation effectively. Create detailed schematics and documentation for manufacturing using NEC standards and industry best practices. Apply knowledge of electrical codes such as NEC to ensure compliance during design and installation phases. Participate in coordination meetings to review progress and resolve design and construction issues. Qualifications Bachelor's degree in Electrical Engineering PE required. Strong proficiency in CAD tools including AutoCAD, Revit, SolidWorks, MicroStation, and schematic capture software. Experience in the commercial construction industry. Strong understanding of electrical systems and construction documentation. Ability to interpret drawings, specifications and construction documents. Excellent problem-solving skills complemented by effective communication abilities across diverse teams. Strong organizational skills with experience managing project scheduling in fast-paced environments. Join our team as an Electrical Engineer to contribute your expertise toward shaping future projects.

The Senior Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Senior Project Engineer will be reporting to the Project Manager and/or Superintendent. The Senior Project Engineer will supervise a team of skilled Project Engineer professionals who support departmental and organizational goals through their efforts. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs.Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 4+ years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities. Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Corporate Electrical Engineer At The Intersect Group, we connect engineering professionals with organizations that are shaping the future of industrial manufacturing and infrastructure. Our client is a leading producer in the building materials industry, known for its commitment to operational excellence, safety, and innovation. With a diverse portfolio spanning cement, wallboard, and paper production, they offer a collaborative environment where engineers can lead impactful projects and drive technical advancement. Role Summary We are seeking a Corporate Electrical Engineer to lead the design, execution, and oversight of electrical engineering projects across multiple business units. Reporting directly to the VP of Engineering and Technology, this role is responsible for developing project scopes, managing contractors, and ensuring compliance with safety and performance standards. You will serve as a technical expert and project manager, supporting capital planning, commissioning, and operational improvements. The ideal candidate brings deep experience in heavy industrial environments, strong leadership capabilities, and a hands-on approach to electrical design and execution. Key Responsibilities Define project scope and objectives in collaboration with internal stakeholders. Develop specifications, drawings, cable schedules, loop sheets, and material take-offs. Manage contractors performing power studies and oversee OEM relationships. Lead contract negotiations and ensure timely execution, including FAT coordination. Execute electrical projects on time and within budget, managing third-party resources. Conduct FEED studies and contribute to cost estimates and design reviews. Design duct banks, grounding systems, electrical rooms, and cable tray layouts. Specify and procure electrical components including transformers, switchgear, VFDs, and motors. Lead inspections, arc flash studies, and commissioning activities. Mentor plant engineers and technical professionals across business units. Key Requirements Accredited bachelor's degree in Electrical Engineering. 5-10 years of experience in heavy industrial environments, preferably within engineering consulting and construction services. Strong project management skills with experience leading electrical scope-only projects. Expertise in electrical design including single line diagrams, loop sheets, and grounding systems. Familiarity with manufacturing processes for cement, wallboard, and paper. Ability to manage budgets, schedules, and reporting metrics (KPIs). Excellent communication and organizational skills. Willingness to travel 3-5 days per month to support project activities. Preferred Software Knowledge Microsoft Excel (Advanced), PowerPoint, Word EasyPower, ETAP, SKM Autodesk Revit & Navisworks Manage ElumTools Ready to Lead Industrial Innovation? If you're a seasoned electrical engineer ready to take ownership of high-impact projects and drive technical excellence across a national footprint, we encourage you to apply today. Submit your resume and contact information to The Intersect Group to be considered for this opportunity.

Altera .# **Job Details:**### ## **Job Description:****About the Role:**For decades, Altera has been at the forefront of programmable logic technology. Our commitment to innovation has empowered countless customers to create groundbreaking solutions that have transformed industries.Join us in our journey to becoming the world's #1 FPGA company!Altera is seeking a **Senior Design Automation Engineer** to join our Design Methodology Automation and Infrastructure Team.The Design Methodology Automation and Infrastructure Team is responsible for building and maintaining the core automation infrastructure that supports Altera's FPGA design flows-from RTL to GDSII. In this senior role, you will drive the architecture, development, and optimization of highly automated, reliable, and scalable flow systems that enhance design productivity and accelerate development cycles for next-generation FPGA products. You will influence technical direction, mentor junior engineers, and collaborate closely with cross-functional teams to deliver world-class automation solutions.**Key Responsibilities:*** Architect next-generation unified FPGA/SoC design methodologies spanning Front-End, handoff to Backend, Design Verification, Design-For-Test (DFT), Design Data Management/Release flows, and FPGA-specific flows such as Design Intent and Configuration Management.* Develop and integrate state-of-the-art EDA solutions, including ML/AI-enhanced tools, flows, and methodologies-sourced externally or developed internally-to create sustainable, scalable automation solutions for multiple chip design programs.* Collaborate with design automation technical leads, design domain leads, and domain managers to define and drive new design automation architectures from concept through full production deployment across upcoming product programs.* Partner with EDA vendors to evaluate, explore, and extend tool capabilities that improve design quality, shorten turn-around time, and enhance design optimization.* Architect, develop, deploy, and maintain advanced design automation flows and methodologies for digital and/or analog design at scale.* Lead evaluation, integration, and enhancement of EDA tools, driving improvements in design productivity, efficiency, and quality across multiple design teams.* Design and implement robust automation frameworks that reduce manual effort, increase reproducibility, and improve overall design throughput.* Identify workflow bottlenecks across design, verification, CAD, and methodology teams and lead cross-functional initiatives to streamline FPGA design execution.* Provide deep technical expertise in scripting, tool customization, and flow development for advanced semiconductor design needs.* Drive continuous innovation in design automation infrastructure through adoption of new methodologies, technologies, and optimizations.* Collaborate with internal and external EDA vendors, owning issue resolution, feature requests, and deployment of next-generation capabilities.* Mentor and provide technical leadership to junior engineers within the Design Automation organization.#LI-MD1**Salary Range**The pay range below is for Bay Area California only. Actual salary may vary based on a number of factors including job location, job-related knowledge, skills, experiences, trainings, etc. We also offer incentive opportunities that reward employees based on individual and company performance.$142,600 - $206,500 USDWe use artificial intelligence to screen, assess, or select applicants for the position.### ## **Qualifications:****Minimum Qualifications:**Bachelor's or Master's in Computer Science, Electrical Engineering, or equivalent, with a minimum of 10 years of experience in IC Design or Design Automation and experience in the following:* Extensive experience with industry-standard EDA tools and hands-on expertise in design methodologies across multiple domains, such as Front-End Logic Design flows, Design Intent and FPGA-specific flows, Design Verification flows, and Design-for-Test (DFT) flows (with Back-End flow knowledge considered a plus).* Strong programming skills in Python, Tcl, C-shell, C, C++, or similar languages.* Familiarity with ML/AI applications and algorithms and their use in EDA or design methodology optimizations.* Proven leadership skills for driving collaborative, cross-functional projects, with strong communication and influencing abilities### ## **Job Type:**Regular### ## **Shift:**Shift 1 (United States of America)### ## **Primary Location:**San Jose, California, United States### ## **Additional Locations:**### ## **Posting Statement:**All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. #J-18808-Ljbffr

A multidisciplinary design firm in Denver is seeking an experienced MEP Engineer to lead design and project management across various sectors. The role requires a Bachelor's in Electrical or Architectural Engineering, a PE license, and over 10 years of experience in MEP engineering with proficiency in Revit. Join a collaborative team dedicated to innovative design solutions while enjoying hybrid work options and comprehensive benefits, including flexible hours and a minimum of 15 days PTO. #J-18808-Ljbffr

Job - Senior Instrumentation and Controls Engineer Salary - $110,000 - $130,000 per annum. Job Type - Full-time Our client is seeking a Senior Instrumentation & Controls Engineer to support and help lead their growing I&C team. This is a senior-level role ideal for someone looking to combine technical project execution with mentorship and leadership. The successful candidate will collaborate closely with the I&C Manager, overseeing controls design, programming, and commissioning across a variety of advanced industrial and process-related projects. The Senior I&C Engineer will ideally have the following attributes: Bachelor's Degree (or equivalent) in Electrical Engineering. 8+ years of experience in PLC-based controls system design, programming, and commissioning. Proficiency in AutoCAD Electrical and electrical schematic design. Extensive hands-on experience programming PLCs (Allen Bradley, Siemens, GE, Wago, etc.) and configuring HMIs. Proven ability to interpret and develop P&IDs, wiring schematics, control panel layouts, and system architecture. Experience in field commissioning, including I/O checkout, instrumentation calibration, and PID tuning. Strong communication skills with prior leadership or mentorship experience preferred. Experience with engine test cell instrumentation and controls is highly desirable. Capable of balancing multiple projects and delivering responsive, client-focused service. Willingness to travel (25-40%) for design reviews, equipment installation, and system start-up. The Senior I&C Engineer duties will involve: Supporting and mentoring a Michigan-based I&C team under the direction of the I&C Manager. Designing and reviewing system architectures, P&IDs, and control sequences. Programming PLCs and HMIs, and integrating controls across custom-engineered systems. Developing bills of material (BOMs), instrument indexes, panel layouts, and wiring diagrams. Preparing technical documentation such as scope of work packages and contractor tools. Leading system testing and validation activities in-house and at customer sites. Executing field commissioning, I/O checkout, and instrumentation tuning. Ensuring systems operate according to design intent and delivering high-performance results. For more information about this Senior Instrumentation & Controls Engineer position, please apply or contact Jack Smillie at *******************, who will be happy to provide further details on this opportunity. Many thanks, Premier Group

A leading technology company in San Jose, California is seeking a Physical Design Engineer to play a critical role in backend implementation for FPGA/SoC devices. You will be responsible for tasks such as floorplanning, PPA optimization, and collaboration with diverse teams. The ideal candidate will have a Bachelor's degree in Electrical Engineering and over 6 years of hands-on experience. Join us to help develop innovative technology solutions. #J-18808-Ljbffr

Senior Project Engineer | Allied Resources Technical Consultants Allied Resources is seeking a Senior Project Engineer to support a major public-works construction project in the Philadelphia area. The position offers a competitive compensation and benefits package including medical, dental, vision, 401k with company match, paid time off, disability coverage, parental leave, volunteer days, and more. Job Responsibilities: Support day-to-day project coordination on a large public-works or commercial construction project, working closely with project managers, superintendents, subcontractors, and design teams. Assist with developing and maintaining project schedules, tracking progress, and preparing updates for project leadership. Manage and organize project documentation including submittals, RFIs, change orders, meeting minutes, and daily reports. Perform quantity takeoffs, track material usage, and support cost control and forecasting efforts. Review drawings, specifications, and contract documents to identify issues, inconsistencies, or potential conflicts. Support procurement activities including scope reviews, vendor coordination, material tracking, and delivery schedules. Provide technical assistance to field teams, helping troubleshoot constructability concerns and support quality control efforts. Participate in site walks, coordination meetings, and inspections; assist with punch lists, project closeout, and turnover documentation. Collaborate with internal and external stakeholders to keep communication clear, accurate, and organized throughout all phases of the project. Contribute to the implementation of safety, quality, and operational best practices across the project. Qualifications: Bachelor's degree in Construction Management, Civil Engineering, Mechanical Engineering, Architecture, or a related field preferred; equivalent experience welcomed. 2+ years of experience working as a Project Engineer, Senior Project Engineer, or similar construction engineering role. Experience supporting commercial, institutional, industrial, or public-works construction projects. Ability to read and understand construction drawings, technical specifications, and contract documents. Strong organizational and communication skills with the ability to manage multiple tasks in a fast-paced environment. Familiarity with construction or project management software (such as Procore, Bluebeam, P6, or equivalent). Strong problem-solving abilities and attention to detail. Valid driver's license and reliable transportation required. EEO Policy: Allied Resources complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Allied Resources does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender identity and expression, disability, veteran status, or any other status protected by law.

Cannon Corp Description: You'll Come for a Job But You'll Stay for an Exciting Career! Engineering and Designing Reliable, Responsive, Solutions. SINCE 1976, CANNON has provided creative solutions to clients in the energy industry, water resources, public infrastructure, and commercial and residential development. We work hard. We play hard. We have fun. JOIN CANNON as a CIVIL SENIOR PRINCIPAL ENGINEER in WEST LOS ANGELES. West Los Angeles is known for its many popular recreational opportunities, and our office is conveniently located adjacent to the Expo MetroLink Commuter line. CIVIL SENIOR PRINCIPAL ENGINEER JOB SUMMARY Provides daily supervision, coordination, technical support, and training to engineers and designers. Responsible for project management, budgeting oversight, mentoring, leading, and managing talented staff, preparing engineering reports and analyses, design and preparation of plans, specifications, and cost estimates for a variety of clients and great projects (residential / commercial and mixed use development) for land development projects in the Inland Empire. This position offers a clear path to leadership within the Development Business Unit, with a trajectory toward a Regional Manager role. The ideal candidate will gain hands-on experience in high-impact projects, preparing them for greater responsibilities and strategic decision-making. As a key player in the team, this role provides opportunities to develop leadership skills, drive business growth, and contribute to the long-term success of the organization. Candidates who excel in this position will be well-positioned for future advancement into a senior leadership role. CIVIL SENIOR PRINCIPAL ENGINEER JOB DUTIES Concurrently manages a variety of civil engineering land development projects. Establishes and fosters client relations and develops proposals and budgets. Participates in professional and/or technical organizations. Uses technical knowledge to design plans for grading, drainage, water quality (SUSMPs, LIDs, WQMPs and /or SWPPPs), utility, street, off-site improvements, sanitary sewers, and water lines and provide construction assistance / support services. Analyzes and recommends solutions to complex drainage problems. Communicates effectively with various departments, clients, and agencies. Mentors, directs, manages, and supervises the design associates on technical matters and procedures and acts as a technical and management resource to staff. Effectively manages quality assurance and quality control. Ensures projects are delivered on schedule and within scope and budget. Manages and coordinates with various jurisdictional agencies to obtain approvals of improvement plans. Is actively involved in business development and expanding opportunities in the Inland Empire area. Requirements: Requires a Bachelor's degree in Civil engineering from an accredited college. Requires 15+ years' experience in civil engineering specifically pertaining to land development projects. 5+ years demonstrated experience supervising and successfully managing projects within the constraints of scope, schedule, budget, and performance requirements, providing technical oversight for projects and all related project phases and tasks, to include quality assurance reviews. Participates in Land Development organizations like BIA, HBA, etc. is a plus. Proven ability to lead teams to success, including past experience directly reviewing and managing employee performance, and mentoring a team of three or more direct reports. Requires a California P.E. license. Proven expertise in land development design. Proven experience in processing improvement plans with jurisdictional agencies in the Inland Empire. Highly proficient with code principles and able to convey them to others. Experience with business development and client management. Experience in hydrologic / hydraulic analyses a plus. Working knowledge of computer software programs used for civil engineering design (AutoCAD, Civil3D, AES, WSPG, Flowmaster, etc.). Experience in business development (obtaining new and repeat business). WE OFFER competitive salaries, excellent benefits package, a hybrid work schedule, and an active and positive team building, work environment. Cannon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, age. Compensation details: 00 Yearly Salary PI0eefe5-

Are you ready to embark on an extraordinary career journey? Look no further than The Austin Company, where greatness is not just a goal, but a way of life. As a leading design, engineering, and construction firm with a rich legacy dating back to 1878, Austin offers unparalleled opportunities for growth, innovation, and professional development. Join our dynamic team and be part of a company that is at the forefront of shaping the future of industries worldwide. With a commitment to excellence, a collaborative work environment, and a passion for delivering exceptional results, Austin empowers its employees to reach their full potential and make a lasting impact. Discover the limitless possibilities that await you at ***************** and embark on a rewarding career journey with Austin. Summary/Objective The Austin Company performs design-build work for industrial and specialized commercial markets. The Electrical Intern actively works with in-house engineers, architects, and construction departments to assist with ongoing functions. Additionally, each intern participates in an interactive intern-specific project requiring coordination amongst the various engineering and architectural design disciplines. Throughout the summer, the interns choose a project, decide a site location, and bring their project idea to life with engineering design and collaboration efforts. Finally, a proposal and presentation are assembled, in which the interns pitch their design proposal to the architectural, engineering, construction and marketing professionals in the office. By the end of the summer internship, students gain an understanding for the project cycle. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions Utilization of Revit, Revizto, Visual Lighting, Bluebeam and Procore to aid in project support. Assists in electrical equipment and device selection and layout, life safety equipment selection and layout, and develops equipment schedules. Performs calculations for specific tasks defined by a discipline mentor. Provides Revit design drawings of sketches prepared by other team members. Participates in departmental and design review meetings. With the assistance of discipline mentor, reads and understands drawings and specifications. For the Intern Project, The Electrical Intern duties are: Coordinates with other construction, architectural and engineering disciplines. Selects appropriate power distribution equipment for the project. Selects appropriate lighting for the project. Provides load, voltage drop, conduit fill and photometric calculations; design and layout for power distribution equipment and lighting. Creates Revit drawings, including one-line diagram, area plans, equipment details. Circuits equipment in Revit to create panel schedules. Conducts quantity take-offs and compiles an estimate of all related electrical components in the project. Aids with the project proposal and presents final design to architectural, engineering, construction and marketing professionals in the office. Required Education and Experience Actively enrolled in a 4 or 5-year degree program in Engineering. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The pay for this position in California is $25.00 per hour. The Austin Company is an EEO and DFWP Employer Austin is wholly owned subsidiary of Kajima.

NOVA Engineering is hiring Staff Engineers to work on Construction Materials Testing & Special Inspection projects throughout the Pensacola, FL region. This opportunity will allow you to work on some of the most prestigious projects in the southeastern U.S. with much room for career advancement. Primary responsibilities will include: Staff/project engineering duties including data reduction, analysis & fieldwork for commercial, industrial, retail, government, office and residential projects (both Geotechnical Engineering and Construction Materials Testing/Inspection) Assisting with project management & reporting Field inspection, sampling & testing of soils/foundations, concrete, masonry, reinforcing steel, etc. Report preparation Client consultation and maintenance Qualifications: B.S. degree in Civil Engineering is required E.I.T. is required Recent Graduates Encouraged to Apply 0 - 2 years relative experience Strong communication skills Position entails approximately 80% fieldwork and 20% office with occasional travel Check out our Perks: In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: Use of take-home Company Vehicle and gas card for daily travel to work sites Comprehensive group medical insurance, including health, dental and vision Opportunity for professional growth and advancement Certification reimbursement Paid time off Company-observed paid holidays Company paid life insurance for employee, spouse and children Company paid short term disability coverage Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection 401K retirement with company matching of 50% on the first 6% of employee contributions Wellness program with incentives Employee Assistance Program NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

Senior MEP Engineer License Required: Active Professional Engineer (PE) We are seeking a Senior MEP Engineer (PE) with 10+ years of experience to lead HVAC retrofit and design-build projects in existing buildings. This is a hands-on technical role for an engineer who wants full project involvement-from assessment through implementation-without moving in Key Qualifications 10+ years of MEP engineering experience (design-build preferred) Strong HVAC/mechanical background; electrical coordination experience a plus Active PE license Experience with retrofit projects and existing buildings Comfortable with both office design work and site visits AutoCAD LT experience (2D drafting; no BIM required) Experience with K-12, municipal, or institutional facilities preferred Technical Skills HVAC load calculations, system sizing, and code-compliant design Energy modeling experience (Carrier HAP preferred; Trane Trace, eQUEST a plus) Ability to produce construction drawings and specifications RFI and submittal review; construction support Working knowledge of ASHRAE, IMC, IECC, and NEC Familiarity with BAS/controls systems in retrofit environments preferred Responsibilities Perform facility assessments and site walk-throughs Design HVAC retrofit and replacement solutions Develop scopes of work, pricing support, and bid packages Coordinate with contractors, vendors, internal teams, and clients Support projects through construction with RFIs and site reviews Manage multiple projects while maintaining quality and deadlines Work Environment 25% field / 75% office or remote Focus on existing buildings (often with limited or no drawings) Collaborative, low-bureaucracy culture Emphasis on practical, maintainable, real-world solutions Why Join Stay deeply technical-no management track required End-to-end project ownership High-impact retrofit work with strong work-life balance