Tower Technician jobs at Centerline Communications - 66 jobs

Job Description Title: Low Voltage Structured Cable Technician Level 2 Coranet Corp. is seeking a Low Voltage Structured Cable Technician Level 2 to join their Field Service teams. The Technician will work under our Lead Cable Technicians and supervise Level 1 Technicians on Coranet's IT infrastructure technician teams to entirely and successfully install low-voltage projects, including structured cabling, access control, physical security, wireless, AV projects, and programming Security, AV, and WiFi systems throughout Long Island with work extending into New Jersey and Metro NY region. Candidates should be based on Long Island. Responsibilities: Installation and Testing: Install, terminate, label, and test copper (CAT5e/CAT6) and fiber (single mode/multi mode) cables. Dress-in, terminate, label, and test copper patch panels. Perform patching according to customer-provided switch matrices. Use Fluke Networks or equivalent copper/fiber cable testers/analyzers. Coordination and Inventory: Work with General Contractors and other project trades such as electrical, furniture, carpet, etc. Receive and inventory drop-shipped project materials. Assemble LAN racks, grounding, cable runways, cable trays, etc. Circuit Extension: Extend carrier POTS, T1, and cable TV circuits. Supervision and Guidance: Provide moderate supervision and guidance to Level 1 Technicians. Assist in training and developing Level 1 Technicians. Troubleshooting: Troubleshoot telecommunication connectivity systems. Programming: Program and configure Security, AV, and WiFi systems. Qualifications: Must have demonstrated experience: with copper and fiber [single mode/multi mode] cable: rough-in, labeling, terminations, and testing. with copper patch panel: dress-in; terminations; labeling; and, testing. with Fluke Networks [or equivalent] copper/fiber cable tester/analyzer. in working with General Contractors and other project trades, e.g., electrical, furniture, carpet, etc. with the receipt and inventory of drop-shipped project materials. with LAN rack: assembly; grounding; cable runways; cable tray; etc. in programming and configuring Security, AV, and WiFi Systems Required: Valid driver's license Access to a motor vehicle and willingness to travel across NJ, PA, etc. Finger and wrist dexterity, hand/eye coordination. Ability to work from heights using proper fall protection. Proficiency with small hand tools and power tools. Ability to climb stairs, ladders, and/or scaffolds. Physical ability to walk, stand, bend, lift up to 50 lbs., and drive a vehicle. Valid OSHA 30 + SST Card Preferred Optional Qualifications: Available for off-hour assignments - weekends and nights. Certifications, e.g., CommScope, Corning, etc. Capable of operating with minimal supervision. Willing to travel, work on remote teams while onsite performing project-driven initiatives Strong administrative skills and the ability to turn around deliverables in a timely fashion Working Conditions: Job is usually performed in indoor/outdoor environments under multiple environmental conditions. Ability to accept periodic assignments that involve travel away from the immediate district office area based on client needs, business needs, and project scope. Exposure to noisy or dusty conditions; chemicals & solvents; mechanical, electrical, and/or other hazards. Must be able to work in the United States.

PLEASE READ BEFORE APPLYING: This is a 1099 contractor position for Spectrum Charter Cable Technician Applicants will be tested in the field with another technician before being approved to start. Do not apply if you do not meet the requirements listed below. Job Overview: We are hiring experienced and in Experienced Fiber Optic/ Cable Technicians The role involves fiber installation and splicing, and may include some coaxial work. This position is ideal for techs who are self-motivated, detail-oriented, and capable of working independently with minimal supervision. Requirements: Proven Fiber Optic/ Cable experience (e. g. , splicing, installation, troubleshooting) Willingness to perform both fiber and coax work, as needed Must pass a field test with another tech prior to onboarding Pass a panel drug screening have valid us work creds Truck Van or Suv to carry both 28ft ladder and 6ft ladder and all cable equipment safetly. Must own Work vehicle (van, SUV, or truck - white color not required in this market) 28 ft. fiberglass ladder & 6 ft. step ladder Full tool set for fiber work (splicing tools, OTDR, etc. ) Valid driver's license Ability to work outdoors and in various environments (attics, rooftops, etc. ) 1099 contract role Paid per job (piece-rate basis) Ongoing work available based on performance and availability Application Process: You will be asked to confirm the above requirements during the application. If you meet all the qualifications and are ready, we encourage you to apply. What We're Looking For: • Must have: Your own reliable vehicle and industry-standard tools. • Must pass: Background check and drug screening. • Familiarity with safety protocols and best practices in cable installation. • Strong work ethic, attention to detail, and ability to thrive outdoors in all conditions. • Valid driver's license. • Excellent communication skills and a team-oriented mindset. Why Join Us? • Top pay with performance-based bonuses. • Comprehensive benefits (health, dental, vision, and more!). • Fast-track growth opportunities in the booming telecom industry. • Supportive team environment with cutting-edge projects. • Make a real difference by powering connectivity for thousands!

Job DescriptionWe are seeking dependable and safety-focused Cell Tower Climbers to join our team at Phoenix Telecom, Inc. In this role, you will be responsible for climbing and working on cell towers to perform installations, maintenance, upgrades, and troubleshooting of wireless communication equipment. This position requires a strong work ethic, a commitment to safety, and the ability to work at heights in various weather conditions. responsibilities: Climb towers and safely perform work at heights up to 500 feet Install, maintain, and repair antennas, lines, radios, and related wireless infrastructure Perform tower inspections and document findings with detailed reports and photos Troubleshoot and test communication equipment and cables using appropriate tools Follow safety procedures and use personal protective equipment (PPE) at all times Work closely with the field crew and project managers to complete assignments on schedule Accurately complete daily reports, time sheets, and safety documentation Travel to job sites as required, sometimes for extended periods Qualifications: Previous experience as a tower climber or in a similar field preferred Must be able to pass a pre-employment drug screen and background check Valid drivers license with a clean driving record Must be comfortable working at heights and in outdoor environments Strong understanding of safety standards (OSHA, RF awareness, etc.) Certifications such as OSHA 10/30, Competent Climber, First Aid/CPR, and RF Awareness are a plus (or willingness to obtain) Strong communication, teamwork, and problem-solving skills Physical Requirements: Ability to lift up to 50 lbs Capable of climbing towers and working at elevation for extended periods Able to work in a physically demanding environment, including extreme temperatures and weather conditions This is a remote position.

Job Description Title: Low Voltage Structured Cable Technician Level 2 (with Access Control Programming Experience) Coranet Corp. is seeking a Low Voltage Structured Cable Technician Level 2 with Access Control Programming Experience to join their Field Service teams. The Technician will work under our Lead Cable Technicians and supervise Level 1 Technicians on Coranet's IT infrastructure technician teams to entirely and successfully install low-voltage projects, including structured cabling, access control, physical security, wireless, AV projects, and programming Security, AV, and WiFi systems throughout the Florida Tri-County region. Responsibilities: Installation and Testing: Install, terminate, label, and test copper (CAT5e/CAT6) and fiber (single mode/multi mode) cables. Dress-in, terminate, label, and test copper patch panels. Perform patching according to customer-provided switch matrices. Use Fluke Networks or equivalent copper/fiber cable testers/analyzers. Coordination and Inventory: Work with General Contractors and other project trades such as electrical, furniture, carpet, etc. Receive and inventory drop-shipped project materials. Assemble LAN racks, grounding, cable runways, cable trays, etc. Circuit Extension: Extend carrier POTS, T1, and cable TV circuits. Supervision and Guidance: Provide moderate supervision and guidance to Level 1 Technicians. Assist in training and developing Level 1 Technicians. Troubleshooting: Troubleshoot telecommunication connectivity systems. Programming: Program and configure Access Control, Security Cameras, AV, and WiFi systems. MUST HAVE: experience programming access control and / or cameras Qualifications: Must have demonstrated experience: with copper and fiber [single mode/multi mode] cable: rough-in, labeling, terminations, and testing. with copper patch panel: dress-in; terminations; labeling; and, testing. with Fluke Networks [or equivalent] copper/fiber cable tester/analyzer. in working with General Contractors and other project trades, e.g., electrical, furniture, carpet, etc. with the receipt and inventory of drop-shipped project materials. with LAN rack: assembly; grounding; cable runways; cable tray; etc. in programming and configuring Security, AV, and WiFi Systems Required: Valid driver's license Access to a motor vehicle Finger and wrist dexterity, hand/eye coordination. Ability to work from heights using proper fall protection. Proficiency with small hand tools and power tools. Ability to climb stairs, ladders, and/or scaffolds. Physical ability to walk, stand, bend, lift up to 50 lbs., and drive a vehicle. Preferred Optional Qualifications: Available for off-hour assignments - weekends and nights. Certifications, e.g., CommScope, Corning, etc. OSHA 30 Certification. Capable of operating with minimal supervision. Willing to travel, work on remote teams while onsite performing project-driven initiatives Strong administrative skills and the ability to turn around deliverables in a timely fashion Working Conditions: Job is usually performed in indoor/outdoor environments under multiple environmental conditions. Ability to accept periodic assignments that involve travel away from the immediate district office area based on client needs, business needs, and project scope. Exposure to noisy or dusty conditions; chemicals & solvents; mechanical, electrical, and/or other hazards. Must be able to work in the United States.

Title: Low Voltage Structured Cable Technician Level 2 (with Access Control Programming Experience) Coranet Corp. is seeking a Low Voltage Structured Cable Technician Level 2 with Access Control Programming Experience to join their Field Service teams. The Technician will work under our Lead Cable Technicians and supervise Level 1 Technicians on Coranet's IT infrastructure technician teams to entirely and successfully install low-voltage projects, including structured cabling, access control, physical security, wireless, AV projects, and programming Security, AV, and WiFi systems throughout the Florida Tri-County region. Responsibilities: Installation and Testing: Install, terminate, label, and test copper (CAT5e/CAT6) and fiber (single mode/multi mode) cables. Dress-in, terminate, label, and test copper patch panels. Perform patching according to customer-provided switch matrices. Use Fluke Networks or equivalent copper/fiber cable testers/analyzers. Coordination and Inventory: Work with General Contractors and other project trades such as electrical, furniture, carpet, etc. Receive and inventory drop-shipped project materials. Assemble LAN racks, grounding, cable runways, cable trays, etc. Circuit Extension: Extend carrier POTS, T1, and cable TV circuits. Supervision and Guidance: Provide moderate supervision and guidance to Level 1 Technicians. Assist in training and developing Level 1 Technicians. Troubleshooting: Troubleshoot telecommunication connectivity systems. Programming: Program and configure Access Control, Security Cameras, AV, and WiFi systems. MUST HAVE: experience programming access control and / or cameras Qualifications: Must have demonstrated experience: with copper and fiber [single mode/multi mode] cable: rough-in, labeling, terminations, and testing. with copper patch panel: dress-in; terminations; labeling; and, testing. with Fluke Networks [or equivalent] copper/fiber cable tester/analyzer. in working with General Contractors and other project trades, e.g., electrical, furniture, carpet, etc. with the receipt and inventory of drop-shipped project materials. with LAN rack: assembly; grounding; cable runways; cable tray; etc. in programming and configuring Security, AV, and WiFi Systems Required: Valid driver's license Access to a motor vehicle Finger and wrist dexterity, hand/eye coordination. Ability to work from heights using proper fall protection. Proficiency with small hand tools and power tools. Ability to climb stairs, ladders, and/or scaffolds. Physical ability to walk, stand, bend, lift up to 50 lbs., and drive a vehicle. Preferred Optional Qualifications: Available for off-hour assignments - weekends and nights. Certifications, e.g., CommScope, Corning, etc. OSHA 30 Certification. Capable of operating with minimal supervision. Willing to travel, work on remote teams while onsite performing project-driven initiatives Strong administrative skills and the ability to turn around deliverables in a timely fashion Working Conditions: Job is usually performed in indoor/outdoor environments under multiple environmental conditions. Ability to accept periodic assignments that involve travel away from the immediate district office area based on client needs, business needs, and project scope. Exposure to noisy or dusty conditions; chemicals & solvents; mechanical, electrical, and/or other hazards. Must be able to work in the United States.

Job Description The Fiber Splicer is experienced in installing, prepping, and splicing Fiber Optic Cabling in ISP and OSP environments. They must also be able to read and interpret construction diagrams and blueprints. ESSENTIAL JOB FUNCTIONS Install, prep and splice Fiber Optic Cabling in ISP and OSP environments Splice fiber optic cables including both loose tube and ribbon cables Operate technical equipment, including but not limited to a laptop computer, OTDR and fusion splicing equipment for single and ribbon fiber Read and interpret existing fiber records, on maps or in the field Complete daily production reports to document work performed; track and communicate daily production and materials Construct proper splice case, including but not limited to grounding, bonding, isolation, slack storage, and sealing. Able to troubleshoot and resolve problems discovered on the job Follow design engineer instructions Recognize and repair route issues Must wear personal protective equipment (PPE) while working including but not limited to hard hat, DOT compliant reflective shirts and vests, work boots, and safety goggles Maintain and promote a safe working environment for yourself and the other members of your team Flexibility to travel as needed for assigned projects Other duties as assigned SKILLS AND ABILITIES Regularly lift and/or move up to 100lbs Ability to work in remote or congested traffic areas Willingness to work outdoors in every type of weather Ability to work alone with minimal supervision Ability to work safely MINIMUM REQUIREMENTS The ability and experience in operating various hand tools, and basic computer equipment Possess a valid driver's license with a good driving record Splicing experience Must be able to pass a pre-employment drug test High School Diploma or GED PREFERRED REQUIREMENTS 21 years of age or older Aerial cable installation experience Certified Pole Climber **Benefits** Competitive salary. Health benefits, including medical, dental, and vision coverage. Retirement savings plan with company matching. Paid time off Opportunities for professional development and career advancement.

Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer. #LI-DNI

Job Description TITLE: Fiber Splicer DEPARTMENT (S): Wireline (Cable/Fiber) DIRECT REPORTs: N/A REPORTS TO: Construction Manager The Fiber Splicer is experienced in installing, prepping, and splicing Fiber Optic Cabling in ISP and OSP environments. They must also be able to read and interpret construction diagrams and blueprints. ESSENTIAL JOB FUNCTIONS Install, prep and splice Fiber Optic Cabling in ISP and OSP environments Splice fiber optic cables including both loose tube and ribbon cables Operate technical equipment, including but not limited to a laptop computer, OTDR and fusion splicing equipment for single and ribbon fiber Read and interpret existing fiber records, on maps or in the field Complete daily production reports to document work performed; track and communicate daily production and materials Construct proper splice case, including but not limited to grounding, bonding, isolation, slack storage, and sealing. Able to troubleshoot and resolve problems discovered on the job Follow design engineer instructions Recognize and repair route issues Must wear personal protective equipment (PPE) while working including but not limited to hard hat, DOT compliant reflective shirts and vests, work boots, and safety goggles Maintain and promote a safe working environment for yourself and the other members of your team Flexibility to travel as needed for assigned projects Other duties as assigned SKILLS AND ABILITIES Regularly lift and/or move up to 100lbs Ability to work in remote or congested traffic areas Willingness to work outdoors in every type of weather Ability to work alone with minimal supervision Ability to work safely MINIMUM REQUIREMENTS The ability and experience in operating various hand tools, and basic computer equipment Possess a valid driver's license with a good driving record Splicing experience Must be able to pass a pre-employment drug test High School Diploma or GED PREFERRED REQUIREMENTS 21 years of age or older Aerial cable installation experience Certified Pole Climber

AFL provides industry-leading fiber optic products, conductor accessories and fittings, and related services across the globe. Our company was founded in 1984 with a single fiber optic cable and has grown to include every facet of the passive optical network, employing over 5,000 associates worldwide and consistently generating annual sales in excess of a billion dollars. In April of 2019, AFL made a major investment in ITC Service Group, a Sacramento-based company providing broadband installation, design and staffing services to the telecommunications and IT industries. ITC Service Group was founded in 1999 and provides managed services and workforce solutions for the nationwide planning design, construction, installation and maintenance of voice, data and video networks. AFL and ITC were built and are operated on similar core values and philosophies. This will prove extremely beneficial to our customers and our employees. With our commitment to professional growth and employee development, let AFL "Connect" you to your next career opportunity! You need to have: The ability and drive to work well with others to achieve common goals and to foster a cooperative climate, as well as to work independently in the field with little supervision. MUST HAVE YOUR OWN VEHICLE AND TOOLS! A service order may require the following skills: * Ability to communicate with customers effectively and professionally * Ability to read a mainframe/cross-connect/control point layout to run jumpers * Ability to read, understand and follow the instruction on dispatched Jobs, trouble tickets, project prints, throw and sequence sheets and associated record updates * Ability to utilize test equipment and interpret test results for all workstreams * Necessary computer skills and Android platform mobile device application usage * Basic electricity * Basic transmission of "xDSL" installation - xDSL means variations of Digital Subscriber Lines. * Completion requirements for each Unit * Configuration of Customer-owned computers * Connecting fiber optic jumpers and drops (aerial, buried, and plenum). * Educating Customer in video, voice and data * Experience in video voice and data (Voice could be VOIP or copper) * Experience with routers and home networking * Experience with test sets as required. * General computer skills * Installation may include running or reusing COAX or CAT 5 wiring * Installation may consist of utilizing MOCA or Wi-Fi technology * Installation of aerial drop * Installation of internet hubs and routers * Installation of ONT and power supplies * Knowledge of COAX cable sizes and types and installing connectors * Knowledge of working with fiber and copper facilities * Ladder safety * May include burying CAT5/coax up to 50 ft. * May require running of temporary fiber drop but so as not to cause a safety hazard to the public, e.g., over roads, sidewalks, or driveways. * OSHA safety requirements * Pole climbing * Splicing of fiber drop connectors * Station installation and repair (Cat 3, Cat 5e, Cat6, RJ11, RJ45 jacks, drop, and NID) * Technical understanding of loss, attenuation, and tiling. * The telephony color code and to be able to identify assigned cable pairs * Verification of service * When required, placing wires between walls * Work zone requirements * Working knowledge of workforce management system: Including but not limited to: Mobile Tech Portal and associated task clearing codes. * Working within attics or crawl spaces ITC Service Group ("ITC"), is an Equal Opportunity Employer. We do not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition (including breastfeeding), or any other basis protected by law.

AFL provides industry-leading fiber optic products, conductor accessories and fittings, and related services across the globe. Our company was founded in 1984 with a single fiber optic cable and has grown to include every facet of the passive optical network, employing over 5,000 associates worldwide and consistently generating annual sales in excess of a billion dollars. In April of 2019, AFL made a major investment in ITC Service Group, a Sacramento-based company providing broadband installation, design and staffing services to the telecommunications and IT industries. ITC Service Group was founded in 1999 and provides managed services and workforce solutions for the nationwide planning design, construction, installation and maintenance of voice, data and video networks. AFL and ITC were built and are operated on similar core values and philosophies. This will prove extremely beneficial to our customers and our employees. With our commitment to professional growth and employee development, let AFL “Connect” you to your next career opportunity! You need to have: The ability and drive to work well with others to achieve common goals and to foster a cooperative climate, as well as to work independently in the field with little supervision. MUST HAVE YOUR OWN VEHICLE AND TOOLS! A service order may require the following skills: Ability to communicate with customers effectively and professionally Ability to read a mainframe/cross-connect/control point layout to run jumpers Ability to read, understand and follow the instruction on dispatched Jobs, trouble tickets, project prints, throw and sequence sheets and associated record updates Ability to utilize test equipment and interpret test results for all workstreams Necessary computer skills and Android platform mobile device application usage Basic electricity Basic transmission of "xDSL" installation - xDSL means variations of Digital Subscriber Lines. Completion requirements for each Unit Configuration of Customer-owned computers Connecting fiber optic jumpers and drops (aerial, buried, and plenum). Educating Customer in video, voice and data Experience in video voice and data (Voice could be VOIP or copper) Experience with routers and home networking Experience with test sets as required. General computer skills Installation may include running or reusing COAX or CAT 5 wiring Installation may consist of utilizing MOCA or Wi-Fi technology Installation of aerial drop Installation of internet hubs and routers Installation of ONT and power supplies Knowledge of COAX cable sizes and types and installing connectors Knowledge of working with fiber and copper facilities Ladder safety May include burying CAT5/coax up to 50 ft. May require running of temporary fiber drop but so as not to cause a safety hazard to the public, e.g., over roads, sidewalks, or driveways. OSHA safety requirements Pole climbing Splicing of fiber drop connectors Station installation and repair (Cat 3, Cat 5e, Cat6, RJ11, RJ45 jacks, drop, and NID) Technical understanding of loss, attenuation, and tiling. The telephony color code and to be able to identify assigned cable pairs Verification of service When required, placing wires between walls Work zone requirements Working knowledge of workforce management system: Including but not limited to: Mobile Tech Portal and associated task clearing codes. Working within attics or crawl spaces ITC Service Group (“ITC”), is an Equal Opportunity Employer. We do not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition (including breastfeeding), or any other basis protected by law.

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer. #LI-DNI

At Motorola Solutions, we believe that everything starts with our people. We're a global close-knit community, united by the relentless pursuit to help keep people safer everywhere. Our critical communications, video security and command center technologies support public safety agencies and enterprises alike, enabling the coordination that's critical for safer communities, safer schools, safer hospitals and safer businesses. Connect with a career that matters, and help us build a safer future. Department OverviewIt's not just about having the right technology, it's about achieving peak performance. Motorola Solutions has served as a trusted partner to government agencies and enterprises worldwide for more than 95 years. Our years of leadership, innovation and experience managing and supporting hundreds of networks in more than 100 countries help answer the challenges of mission critical operations - ensure continuity, enhance productivity and reduce risk - helping achieve peak performance. When every second counts and performance reliability is a must - we are ready and able to serve today, tomorrow and into the future. Job Description Technical System Support and Maintenance: Assist with the provisioning and re-provisioning of LMR (Land Mobile Radio) assets, including non-first responder radios and APX Next feature sets, for public safety operations. Support the current ASTRO 2024.HS system, including system optimization, and technical support for warranty efforts related to technology refresh and upgrades. Perform programming of ASTRO radios and possess a detailed understanding of Motorola RSS/CPS software to program both subscriber and infrastructure equipment. Provide technical support for specialized systems and product applications, including troubleshooting software-driven electronics, provisioning communication system infrastructure, and performance optimization of RF and Broadband architecture (e.g., legacy analog, advanced digital P25, and data infrastructure). Program, configure, optimize, test, and document complex communications systems. Deliver everyday maintenance, troubleshooting, and repair of Motorola Land Mobile Radio Products, specifically state-of-the-art Astro 25 trunking equipment. Assist with backhaul and ethernet interfaces. Collaborate with cross-departmental technicians on the Astro System. Deliver working knowledge of Infrastructure Technologies, including Motorola Astro 25 cores, MCC console line, and third-party networking equipment. Customer Interaction and Reporting: Provide customer training on Motorola Land Mobile Radio Products. Communicate concepts, recommendations, and strategies clearly to customers and internal Motorola teams. Possess a detailed understanding of Motorola systems to assist in the design, troubleshooting, and maintenance of Motorola's product lines. Assist indirectly with warranty reporting efforts. Provide weekly reports on activities and accomplishments. Candidate Requirements: Strong networking skills is a plus Understanding of IA systems and group policies in a network administrative position. Proficient with Microsoft Office products and Motorola Radio Service Software products. Must have excellent communications skills and always present a professional image. Must be a U.S. Citizen and able to obtain background clearance as required by government customer Travel/Location/Hours: LMR Technicians will be available M-F for an 8-hour day with the schedule to be determined by the customer's Radio Services Manager. Technicians will perform work following the Government and Motorola Solutions holiday calendar. Non-government holidays and PTO will be notified to the customers Radio Services Manager with reasonable notice. Candidates must be based within 1 hour from a major international airport and 29 Palms. MUST be willing to travel by air up to 25% of the time and be a self motivator. #LI-CC1 Target Base Salary Range: $65,000 - $75,000 USD Consistent with Motorola Solutions values and applicable law, we provide the following information to promote pay transparency and equity. Pay within this range varies and depends on job-related knowledge, skills, and experience. The actual offer will be based on the individual candidate. Basic Requirements 3+ years experience in one of the following: LMR, RF Systems, Radio Frequency, Radio Communications, Wired/Wireless Communication Systems, Networking Equipment, IT Systems, ASTRO, or Military experience Must be a U.S. citizen with the ability to obtain necessary security clearance as required by government contract. Travel Requirements25-50% Relocation ProvidedNone Position TypeExperienced Referral Payment PlanYes Our U.S. Benefits include: Incentive Bonus Plans Medical, Dental, Vision benefits 401K with Company Match 10 Paid Holidays Generous Paid Time Off Packages Employee Stock Purchase Plan Paid Parental & Family Leave and more! EEO Statement Motorola Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or belief, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other legally-protected characteristic. We are proud of our people-first and community-focused culture, empowering every Motorolan to be their most authentic self and to do their best work to deliver on the promise of a safer world. If you'd like to join our team but feel that you don't quite meet all of the preferred skills, we'd still love to hear why you think you'd be a great addition to our team. We're committed to providing an inclusive and accessible recruiting experience for candidates with disabilities, or other physical or mental health conditions. To request an accommodation, please complete this Reasonable Accommodations Form so we can assist you.

Tyto Athene is searching for multiple Telephony Technicians with expertise in DoD telephony infrastructure to assist in completing site surveys at 11 Naval Bases throughout the continental United States. Responsibilities: Documentation and Reporting: Maintain detailed records of system configurations, network diagrams, cabling, testing, changes made, and resolution steps for survey report. Collaboration and Support: Work closely with cross-functional teams to support project related tasks and initiatives. Compliance and Standards: Stay current with industry trends, best practices, and new technologies. Qualifications Required: Minimum of 5 years of experience in in low-voltage cabling, telecommunications, or a related field. Strong understanding of telecommunications principles, equipment, and protocols (e.g., TCP/IP, VoIP, SIP). Familiarity with cabling standards and network configurations is essential. Strong knowledge of PBX systems (e.g., Avaya, Cisco, Mitel), VoIP protocols (SIP, TCP/IP), and network fundamentals (LAN/WAN). Use specialized testing equipment, including cable analyzers and continuity testers, to verify cable functionality. Strong understanding of different cable types, telecommunications protocols, network topology, and electrical safety standards Strong analytical and problem-solving abilities. Excellent communication and collaboration skills. Ability to work effectively under pressure and in emergency situations. A high school diploma or equivalent is required, with an associate's degree or technical certification in electronics, telecommunications, or IT being highly valued Certifications: Industry certifications like CompTIA Network+, Cisco CCNA, or manufacturer-specific certifications (Avaya, Mitel, etc.) can enhance career prospects Physical Stamina: The role may require physical exertion, including climbing ladders or towers, lifting heavy equipment, and working in confined or awkward spaces. Security: Active Secret clearance required Travel: This position will require 85% travel About Tyto Athene Compensation: Compensation is unique to each candidate and relative to the skills and experience they bring to the position. The salary range for this position is typically between $75,000 - $85,000 This does not guarantee a specific salary as compensation is based upon multiple factors such as education, experience, certifications, and other requirements, and may fall outside of the above-stated range. Benefits: Highlights of our benefits include Health/Dental/Vision, 401(k) match, Paid Time Off, STD/LTD/Life Insurance, Referral Bonuses, professional development reimbursement, and parental leave. Tyto Athene is a trusted leader in IT services and solutions, delivering mission-focused digital transformation that drives measurable success. Our expertise spans four core technology domains-Network Modernization, Hybrid Cloud, Cybersecurity, and Enterprise IT-empowering our clients with cutting-edge solutions tailored to their evolving needs. With over 50 years of experience, Tyto Athene proudly support Defense, Intelligence, Space, National Security, Civilian, Health, and Public Safety clients across the United States and worldwide. At Tyto Athene, we believe that success starts with our people. We foster a collaborative, innovative, and mission-driven environment where every team member plays a critical role in shaping the future of technology. Are you ready to join #TeamTyto? Tyto Athene, LLC is an Equal Opportunity Employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, [sexual orientation, gender identity,] national origin, disability, status as a protected veteran, or any characteristic protected by applicable law.

About the Role: As a Kinetic Buried Drop Technician working on the buried drop team, you will perform the physical installation of buried copper, fiber, and coaxial cable from the network hub to the customers' residence. Our team of Buried Drop Technicians care about technology and connecting customers to products they value. This is a safety sensitive position. What You'll Do: Perform the physical installation of buried copper, fiber & coaxial drop cable to connect Uniti's network to the customers' residence. Use your technical expertise and customer focus to create meaningful connections with customers. Interpret work drawings and instructions and complete necessary paperwork. Sell and promote Uniti products and services. Train new employees on daily job functions. Operate a hand-held computer for retrieving and clearing job tasks. Operate machinery including trenching and boring equipment for burying cables. Do You Have: The ability to walk ½ mile + while operating following a drop plow that places service cable. Ability to work the schedule including overtime, callouts, and standby as needed. Basic technology and math skills. Ability to distinguish colors present in color-coded cable. Ability to lift and carry up to 70 pounds. Ability to successfully complete the required training, including overnight travel out-of-state. Ability to travel overnight, including out of state based on business needs. A valid driver's license and safe driving record. Ability to pass pre-employment DOT physical. Obtain DOT certification and remain DOT certified. * This Position Follows a Union Bidding Process* Physical Tasks- Standing Continuously: 67-100% | Walking Continuously: 67 - 100% | Sitting Occasionally: 0-33% Driving- Car: Occasionally: 0-33% | Van: Continuously: 67-100% | CMV: Occasionally: 0-33% | Climbing: Continuously: 67-100% | Bending: Continuously: 67-100% | Crouching: Continuously: 67-100%| Pushing-Pulling: Continuously: 67-100% |Carrying: Continuously: 67-100% | Reaching Above Head: Continuously: 67-100% | Lifting-Lowering >1-15 lbs: Continuously: 67-100% | >15-30 lbs: Continuously: 67-100% | >30+ lbs: Continuously: 67-100% Repetitive Hand Action: >Medium Dexterity: Continuously: 67-100% | >Fine Manipulating: Continuously: 67-100% |Operate Foot Control: Occasionally: 0-33% Audio Visual Needs- Hearing: Continuously: 67-100%| Near Vision: Continuously: 67-100%| Far Vision: Continuously: 67-100% |Peripheral Vision: Continuously: 67-100% | Depth Perception: Occasionally: 0-33% | Color Discrimination: 34 - 66% Exposures to: Cold: Frequently: 34-66%, Heat: Frequently: 34-66%, Dampness: Occasionally: 0-33%, Heights: Occasionally: 0-33%, Vibration: Occasionally: 0-33%, Skin Irritants: Occasionally: 0-33%, Lung Irritants: Dust: Occasionally: 0-33%, Fumes/Gases: Occasionally: 0-33% Equipment Used in Job Performance/Working Environment: Test Equipment, Hand and Power Tools, Van Types of Driver's License Required: Driver's License

About the Role: As a Kinetic Buried Drop Technician working on the buried drop team, you will perform the physical installation of buried copper, fiber, and coaxial cable from the network hub to the customers' residence. Our team of Buried Drop Technicians care about technology and connecting customers to products they value. This is a safety sensitive position. What You'll Do: Perform the physical installation of buried copper, fiber & coaxial drop cable to connect Uniti's network to the customers' residence. Use your technical expertise and customer focus to create meaningful connections with customers. Interpret work drawings and instructions and complete necessary paperwork. Sell and promote Uniti products and services. Train new employees on daily job functions. Operate a hand-held computer for retrieving and clearing job tasks. Operate machinery including trenching and boring equipment for burying cables. Do You Have: The ability to walk ½ mile + while operating following a drop plow that places service cable. Ability to work the schedule including overtime, callouts, and standby as needed. Basic technology and math skills. Ability to distinguish colors present in color-coded cable. Ability to lift and carry up to 70 pounds. Ability to successfully complete the required training, including overnight travel out-of-state. Ability to travel overnight, including out of state based on business needs. A valid driver's license and safe driving record. Ability to pass pre-employment DOT physical. Obtain DOT certification and remain DOT certified. * This Position Follows a Union Bidding Process* Physical Tasks - Standing Continuously: 67-100% | Walking Continuously: 67 - 100% | Sitting Occasionally: 0-33% Driving - Car: Occasionally: 0-33% | Van: Continuously: 67-100% | CMV: Occasionally: 0-33% | Climbing: Continuously: 67-100% | Bending: Continuously: 67-100% | Crouching: Continuously: 67-100%| Pushing-Pulling: Continuously: 67-100% |Carrying: Continuously: 67-100% | Reaching Above Head: Continuously: 67-100% | Lifting-Lowering >1-15 lbs: Continuously: 67-100% | >15-30 lbs: Continuously: 67-100% | >30+ lbs: Continuously: 67-100% Repetitive Hand Action: >Medium Dexterity: Continuously: 67-100% | >Fine Manipulating: Continuously: 67-100% |Operate Foot Control: Occasionally: 0-33% Audio Visual Needs - Hearing: Continuously: 67-100%| Near Vision: Continuously: 67-100%| Far Vision: Continuously: 67-100% |Peripheral Vision: Continuously: 67-100% | Depth Perception: Occasionally: 0-33% | Color Discrimination: 34 - 66% Exposures to: Cold: Frequently: 34-66%, Heat: Frequently: 34-66%, Dampness: Occasionally: 0-33%, Heights: Occasionally: 0-33%, Vibration: Occasionally: 0-33%, Skin Irritants: Occasionally: 0-33%, Lung Irritants: Dust: Occasionally: 0-33%, Fumes/Gases: Occasionally: 0-33% Equipment Used in Job Performance/Working Environment: Test Equipment, Hand and Power Tools, Van Types of Driver's License Required: Driver's License

Kinetic provides high-speed broadband Internet, phone service, and Digital TV packages to residential customers as well as products and services for small, medium, and large businesses, and government agencies. ***************** **_________________________________________________________** **About the Role:** As a Kinetic Buried Drop Technician working on the buried drop team, you will perform the physical installation of buried copper, fiber, and coaxial cable from the network hub to the customers' residence. Our team of Buried Drop Technicians care about technology and connecting customers to products they value. This is a safety sensitive position. **What You'll Do:** + Perform the physical installation of buried copper, fiber & coaxial drop cable to connect Uniti's network to the customers' residence. + Use your technical expertise and customer focus to create meaningful connections with customers. + Interpret work drawings and instructions and complete necessary paperwork. + Sell and promote Uniti products and services. + Train new employees on daily job functions. + Operate a hand-held computer for retrieving and clearing job tasks. + Operate machinery including trenching and boring equipment for burying cables. **Do You Have:** + The ability to walk ½ mile + while operating following a drop plow that places service cable. + Ability to work the schedule including overtime, callouts, and standby as needed. + Basic technology and math skills. + Ability to distinguish colors present in color-coded cable. + Ability to lift and carry up to 70 pounds. + Ability to successfully complete the required training, including overnight travel out-of-state. + Ability to travel overnight, including out of state based on business needs. + A valid driver's license and safe driving record. + Ability to pass pre-employment DOT physical. + Obtain DOT certification and remain DOT certified. *****This Position Follows a Union Bidding Process***** **Physical Tasks** - Standing Continuously: 67-100% | Walking Continuously: 67 - 100% | Sitting Occasionally: 0-33% **Driving** - Car: Occasionally: 0-33% | Van: Continuously: 67-100% | CMV: Occasionally: 0-33% | Climbing: Continuously: 67-100% | Bending: Continuously: 67-100% | Crouching: Continuously: 67-100%| Pushing-Pulling: Continuously: 67-100% |Carrying: Continuously: 67-100% | Reaching Above Head: Continuously: 67-100% | Lifting-Lowering >1-15 lbs: Continuously: 67-100% | >15-30 lbs: Continuously: 67-100% | >30+ lbs: Continuously: 67-100% **Repetitive Hand Action** : >Medium Dexterity: Continuously: 67-100% | >Fine Manipulating: Continuously: 67-100% |Operate Foot Control: Occasionally: 0-33% **Audio Visual Needs** - Hearing: Continuously: 67-100%| Near Vision: Continuously: 67-100%| Far Vision: Continuously: 67-100% |Peripheral Vision: Continuously: 67-100% | Depth Perception: Occasionally: 0-33% | Color Discrimination: 34 - 66% **Exposures to** : Cold: Frequently: 34-66%, Heat: Frequently: 34-66%, Dampness: Occasionally: 0-33%, Heights: Occasionally: 0-33%, Vibration: Occasionally: 0-33%, Skin Irritants: Occasionally: 0-33%, Lung Irritants: Dust: Occasionally: 0-33%, Fumes/Gases: Occasionally: 0-33% **Equipment Used in Job Performance/Working Environment** : Test Equipment, Hand and Power Tools, Van **Types of Driver's License Required** : Driver's License **_________________________________________________________** **Our Benefits:** + Medical, Dental, Vision Insurance Plans + 401K Plan + Health & Flexible Savings Account + Life and AD&D, Spousal Life, Child Life Insurance Plans + Educational Assistance Plan Uniti is an equal opportunity employer. At Uniti, we celebrate the authenticity and uniqueness of our people and their ideas. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, genetic information, protected veteran status, current military status, disability, sexual orientation, marital status, creed, citizenship status, or any other status protected by law, and to give full consideration to qualified disabled individuals and protected veterans. Actual base pay for this job will depend on the candidate's primary work location and other factors, such as relevant skills and experience. **Notice to Non-U.S. Citizens:** Uniti, as a holder of licenses granted by the Federal Communications Commission, is required to notify and to obtain approval from federal regulatory agencies prior to granting certain system/network access to any non-U.S. citizen personnel. Offers of employment extended to non-U.S. citizens are contingent upon receiving the requisite approval from agencies overseeing compliance. Non-U.S. citizens are required to provide Uniti with the personal identifying information required to obtain the necessary approval prior to accessing certain systems and/or Uniti's network. _If you are not a U.S. citizen, please notify your recruiter or email ********************** as soon as possible for information on Uniti's foreign personnel disclosure and approval requirements._ **Notice to Applicants:** Depending on the position and its job functions, offers of employment may be contingent upon successful completion of certain pre-employment screenings, including but not limited to drug-screen, motor vehicle records check, or other pre-employment screening. All such screenings will be conducted by an external third-party with the Candidate's written consent and in accordance with federal and state law. Refusal to authorize or submit to a required pre-employment screening may disqualify the candidate from employment. Any misrepresentation during the application or interview process may result in denial of employment, withdrawal of offer, or termination. **Job Details** **Job Family** **Bargaining** **Job Function** **Bargaining** **Pay Type** **Hourly**

About the Role: As a Kinetic Buried Drop Technician working on the buried drop team, you will perform the physical installation of buried copper, fiber, and coaxial cable from the network hub to the customers' residence. Our team of Buried Drop Technicians care about technology and connecting customers to products they value. This is a safety sensitive position. What You'll Do: Perform the physical installation of buried copper, fiber & coaxial drop cable to connect Uniti's network to the customers' residence. Use your technical expertise and customer focus to create meaningful connections with customers. Interpret work drawings and instructions and complete necessary paperwork. Sell and promote Uniti products and services. Train new employees on daily job functions. Operate a hand-held computer for retrieving and clearing job tasks. Operate machinery including trenching and boring equipment for burying cables. Do You Have: The ability to walk ½ mile + while operating following a drop plow that places service cable. Ability to work the schedule including overtime, callouts, and standby as needed. Basic technology and math skills. Ability to distinguish colors present in color-coded cable. Ability to lift and carry up to 70 pounds. Ability to successfully complete the required training, including overnight travel out-of-state. Ability to travel overnight, including out of state based on business needs. A valid driver's license and safe driving record. Ability to pass pre-employment DOT physical. Obtain DOT certification and remain DOT certified. ***This Position Follows a Union Bidding Process*** Physical Tasks- Standing Continuously: 67-100% | Walking Continuously: 67 - 100% | Sitting Occasionally: 0-33% Driving- Car: Occasionally: 0-33% | Van: Continuously: 67-100% | CMV: Occasionally: 0-33% | Climbing: Continuously: 67-100% | Bending: Continuously: 67-100% | Crouching: Continuously: 67-100%| Pushing-Pulling: Continuously: 67-100% |Carrying: Continuously: 67-100% | Reaching Above Head: Continuously: 67-100% | Lifting-Lowering >1-15 lbs: Continuously: 67-100% | >15-30 lbs: Continuously: 67-100% | >30+ lbs: Continuously: 67-100% Repetitive Hand Action: >Medium Dexterity: Continuously: 67-100% | >Fine Manipulating: Continuously: 67-100% |Operate Foot Control: Occasionally: 0-33% Audio Visual Needs- Hearing: Continuously: 67-100%| Near Vision: Continuously: 67-100%| Far Vision: Continuously: 67-100% |Peripheral Vision: Continuously: 67-100% | Depth Perception: Occasionally: 0-33% | Color Discrimination: 34 - 66% Exposures to: Cold: Frequently: 34-66%, Heat: Frequently: 34-66%, Dampness: Occasionally: 0-33%, Heights: Occasionally: 0-33%, Vibration: Occasionally: 0-33%, Skin Irritants: Occasionally: 0-33%, Lung Irritants: Dust: Occasionally: 0-33%, Fumes/Gases: Occasionally: 0-33% Equipment Used in Job Performance/Working Environment: Test Equipment, Hand and Power Tools, Van Types of Driver's License Required: Driver's License

Kinetic provides high-speed broadband Internet, phone service, and Digital TV packages to residential customers as well as products and services for small, medium, and large businesses, and government agencies. ***************** **_________________________________________________________** **About the Role:** As a Kinetic Buried Drop Technician working on the buried drop team, you will perform the physical installation of buried copper, fiber, and coaxial cable from the network hub to the customers' residence. Our team of Buried Drop Technicians care about technology and connecting customers to products they value. This is a safety sensitive position. **What You'll Do:** + Perform the physical installation of buried copper, fiber & coaxial drop cable to connect Uniti's network to the customers' residence. + Use your technical expertise and customer focus to create meaningful connections with customers. + Interpret work drawings and instructions and complete necessary paperwork. + Sell and promote Uniti products and services. + Train new employees on daily job functions. + Operate a hand-held computer for retrieving and clearing job tasks. + Operate machinery including trenching and boring equipment for burying cables. **Do You Have:** + The ability to walk ½ mile + while operating following a drop plow that places service cable. + Ability to work the schedule including overtime, callouts, and standby as needed. + Basic technology and math skills. + Ability to distinguish colors present in color-coded cable. + Ability to lift and carry up to 70 pounds. + Ability to successfully complete the required training, including overnight travel out-of-state. + Ability to travel overnight, including out of state based on business needs. + A valid driver's license and safe driving record. + Ability to pass pre-employment DOT physical. + Obtain DOT certification and remain DOT certified. *****This Position Follows a Union Bidding Process***** **Physical Tasks** - Standing Continuously: 67-100% | Walking Continuously: 67 - 100% | Sitting Occasionally: 0-33% **Driving** - Car: Occasionally: 0-33% | Van: Continuously: 67-100% | CMV: Occasionally: 0-33% | Climbing: Continuously: 67-100% | Bending: Continuously: 67-100% | Crouching: Continuously: 67-100%| Pushing-Pulling: Continuously: 67-100% |Carrying: Continuously: 67-100% | Reaching Above Head: Continuously: 67-100% | Lifting-Lowering >1-15 lbs: Continuously: 67-100% | >15-30 lbs: Continuously: 67-100% | >30+ lbs: Continuously: 67-100% **Repetitive Hand Action** : >Medium Dexterity: Continuously: 67-100% | >Fine Manipulating: Continuously: 67-100% |Operate Foot Control: Occasionally: 0-33% **Audio Visual Needs** - Hearing: Continuously: 67-100%| Near Vision: Continuously: 67-100%| Far Vision: Continuously: 67-100% |Peripheral Vision: Continuously: 67-100% | Depth Perception: Occasionally: 0-33% | Color Discrimination: 34 - 66% **Exposures to** : Cold: Frequently: 34-66%, Heat: Frequently: 34-66%, Dampness: Occasionally: 0-33%, Heights: Occasionally: 0-33%, Vibration: Occasionally: 0-33%, Skin Irritants: Occasionally: 0-33%, Lung Irritants: Dust: Occasionally: 0-33%, Fumes/Gases: Occasionally: 0-33% **Equipment Used in Job Performance/Working Environment** : Test Equipment, Hand and Power Tools, Van **Types of Driver's License Required** : Driver's License **_________________________________________________________** **Our Benefits:** + Medical, Dental, Vision Insurance Plans + 401K Plan + Health & Flexible Savings Account + Life and AD&D, Spousal Life, Child Life Insurance Plans + Educational Assistance Plan Uniti is an equal opportunity employer. At Uniti, we celebrate the authenticity and uniqueness of our people and their ideas. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, genetic information, protected veteran status, current military status, disability, sexual orientation, marital status, creed, citizenship status, or any other status protected by law, and to give full consideration to qualified disabled individuals and protected veterans. Actual base pay for this job will depend on the candidate's primary work location and other factors, such as relevant skills and experience. **Notice to Non-U.S. Citizens:** Uniti, as a holder of licenses granted by the Federal Communications Commission, is required to notify and to obtain approval from federal regulatory agencies prior to granting certain system/network access to any non-U.S. citizen personnel. Offers of employment extended to non-U.S. citizens are contingent upon receiving the requisite approval from agencies overseeing compliance. Non-U.S. citizens are required to provide Uniti with the personal identifying information required to obtain the necessary approval prior to accessing certain systems and/or Uniti's network. _If you are not a U.S. citizen, please notify your recruiter or email ********************** as soon as possible for information on Uniti's foreign personnel disclosure and approval requirements._ **Notice to Applicants:** Depending on the position and its job functions, offers of employment may be contingent upon successful completion of certain pre-employment screenings, including but not limited to drug-screen, motor vehicle records check, or other pre-employment screening. All such screenings will be conducted by an external third-party with the Candidate's written consent and in accordance with federal and state law. Refusal to authorize or submit to a required pre-employment screening may disqualify the candidate from employment. Any misrepresentation during the application or interview process may result in denial of employment, withdrawal of offer, or termination. **Job Details** **Job Family** **Bargaining** **Job Function** **Bargaining** **Pay Type** **Hourly**

About the Role: As a Kinetic Buried Drop Technician working on the buried drop team, you will perform the physical installation of buried copper, fiber, and coaxial cable from the network hub to the customers' residence. Our team of Buried Drop Technicians care about technology and connecting customers to products they value. This is a safety sensitive position. What You'll Do: Perform the physical installation of buried copper, fiber & coaxial drop cable to connect Uniti's network to the customers' residence. Use your technical expertise and customer focus to create meaningful connections with customers. Interpret work drawings and instructions and complete necessary paperwork. Sell and promote Uniti products and services. Train new employees on daily job functions. Operate a hand-held computer for retrieving and clearing job tasks. Operate machinery including trenching and boring equipment for burying cables. Do You Have: The ability to walk ½ mile + while operating following a drop plow that places service cable. Ability to work the schedule including overtime, callouts, and standby as needed. Basic technology and math skills. Ability to distinguish colors present in color-coded cable. Ability to lift and carry up to 70 pounds. Ability to successfully complete the required training, including overnight travel out-of-state. Ability to travel overnight, including out of state based on business needs. A valid driver's license and safe driving record. Ability to pass pre-employment DOT physical. Obtain DOT certification and remain DOT certified. ***This Position Follows a Union Bidding Process*** Physical Tasks - Standing Continuously: 67-100% | Walking Continuously: 67 - 100% | Sitting Occasionally: 0-33% Driving - Car: Occasionally: 0-33% | Van: Continuously: 67-100% | CMV: Occasionally: 0-33% | Climbing: Continuously: 67-100% | Bending: Continuously: 67-100% | Crouching: Continuously: 67-100%| Pushing-Pulling: Continuously: 67-100% |Carrying: Continuously: 67-100% | Reaching Above Head: Continuously: 67-100% | Lifting-Lowering >1-15 lbs: Continuously: 67-100% | >15-30 lbs: Continuously: 67-100% | >30+ lbs: Continuously: 67-100% Repetitive Hand Action: >Medium Dexterity: Continuously: 67-100% | >Fine Manipulating: Continuously: 67-100% |Operate Foot Control: Occasionally: 0-33% Audio Visual Needs - Hearing: Continuously: 67-100%| Near Vision: Continuously: 67-100%| Far Vision: Continuously: 67-100% |Peripheral Vision: Continuously: 67-100% | Depth Perception: Occasionally: 0-33% | Color Discrimination: 34 - 66% Exposures to: Cold: Frequently: 34-66%, Heat: Frequently: 34-66%, Dampness: Occasionally: 0-33%, Heights: Occasionally: 0-33%, Vibration: Occasionally: 0-33%, Skin Irritants: Occasionally: 0-33%, Lung Irritants: Dust: Occasionally: 0-33%, Fumes/Gases: Occasionally: 0-33% Equipment Used in Job Performance/Working Environment: Test Equipment, Hand and Power Tools, Van Types of Driver's License Required: Driver's License