Safety Specialist jobs at CentiMark - 1796 jobs

The EHS manager provides leadership and strategic direction to achieve excellence in Environmental, Health, safety, and security (EHSS) performance. He or she ensures compliance with all Federal, State, and local EHS regulations. Responsibilities: Lead and facilitate all key EHSS programs at the site and ensure plant and applicable regional objectives are met. Influential leader of the site by promoting a strong safety culture supporting the goal of an injury-free workplace where employees take responsibility for their safety as well as that of others Prepare and submit all regulatory reports as required by the permit and regulations. Implement site audit program to promote frequent inspections by site management team to ensure compliance with housekeeping, safe work permitting, energy control (LOTO), job safety analysis, spill prevention, and other EHSS items. Provide training on EHSS issues, maintain records, determine and obtain appropriate materials ensures plant uses training platforms Ensure EHSS events are appropriately logged, recorded, and reported on EHS platform. Provide follow-up for EHSS events to ensure that corrective actions are completed and are not reoccurring. Maintains EHSS reporting platform for site Review and maintain site EHSS documents and ensure that they are complete and follow federal regulations and corporate policies Provide Incident investigation assistance for all accidents, and near misses. Ensure that the incident is appropriately recorded and reported to internal and external entities. Ensure that all corrective actions are completed and that the issue doesn't recur. Conduct plant inspections, and housekeeping events and measures are being performed to help keep the site in compliance with legal requirements and corporate standards Qualifications Bachelor's degree in chemical engineering, industrial safety, environmental science, or related technical field required. At least five years of exempt-level environmental health and safety experience in an industrial setting is required. Safety Knowledge on Hydrogen and Acetylene Systems preferred. Solid knowledge of OSHA standards (Safe Work Permits, Energy Control, Fall Protection, Personal Protective Equipment, and process safety management etc.), root cause analysis and incident investigation. General understanding of Texas, US and Harris County environmental regulations, continuous emissions monitoring systems, spill prevention control and counter measure, storm water pollution prevention, waste management, wastewater, and air compliance programs required. Excellent communication, organization, management, and leadership skills

About the Role Harper Brothers Construction is seeking a highly skilled Safety Specialist to support a major infrastructure project in Downtown Houston. This individual will serve as the on-site safety leader responsible for enforcing safety standards, environmental compliance, DOT/traffic control requirements, and company procedures. The ideal candidate will be well-versed in: Underground utilities safety Stormwater environmental regulations TPDES Construction General Permit compliance Construction Stagegate requirements Revegetation/restoration activities DOT compliance and traffic control plans (TCPs) This position requires a proactive safety mindset, strong field presence, and the ability to work collaboratively with crews, subcontractors, environmental teams, and project management. Key Responsibilities Field Safety Leadership Provide full-time, on-site safety oversight for Downtown Houston civil construction operations. Conduct daily field safety inspections, hazard analyses, and equipment audits. Enforce all HBC safety policies and OSHA 1926 regulations. Underground Utilities Safety Monitor trenching, excavation, manhole access, and utility installation. Ensure proper sloping, benching, shoring, and shielding are in place. Verify JHAs, utility locates, and competent person designations. Environmental & Storm Water Compliance Enforce SWPPP requirements and maintain stormwater records. Inspect and maintain BMPs (silt fencing, inlet protection, rock check dams, etc.). Ensure compliance with TPDES Construction General Permit rules. Conduct environmental walkthroughs and implement corrective actions. Construction Stagegate Compliance Support and document each Stagegate milestone. Verify safety and environmental controls before advancing to the next phase. Collaborate with PMs to ensure compliance gaps are resolved promptly. Revegetation & Restoration Oversight Inspect erosion control, restoration and revegetation activities. Ensure compliance with environmental restoration specifications. DOT COMPLIANCE & TRAFFIC CONTROL This is a critical component of the position. The Safety Specialist will: Ensure DOT compliance for equipment, fleet, and trucking operations. Conduct walk-throughs of haul routes, delivery paths, and access points. Verify driver certifications, logs, inspections, and compliance documentation. Ensure all traffic control plans (TCPs) are implemented correctly. Inspect signage, barricades, lane closures, flagging operations, and detours. Coordinate with city inspectors, traffic engineering, and third-party MOT providers. Ensure TCP modifications are approved and compliant with MUTCD standards. Training, Documentation & Reporting Lead daily safety briefings and weekly toolbox talks. Track training, inspections, and certifications using SiteDocs. Conduct and document incident investigations and root cause analyses. Communicate with regulatory agencies, environmental consultants, and inspectors. Qualifications Required 3-5 years of construction safety experience (underground utilities required). Strong understanding of SWPPP, TPDES permits, BMPs, and stormwater regulations. Experience with TCP implementation, barricades, lane closures, and traffic control safety. Knowledge of DOT compliance programs, regulations, and vehicle inspection requirements. OSHA 30 certification. Strong communication, documentation, and leadership skills. Ability to interpret civil drawings, TCPs, and environmental plans. Preferred CHST, COSS, or other safety certifications. Previous experience working within urban environments or DOT roadway projects. SiteDocs or digital safety software experience. Bilingual English/Spanish.

Our focus is business owners. Is yours? Everything we do at BBSI is in support of business owners. We facilitate conversations around a broad range of organizational areas that allow business owners to run their companies more effectively. With 69 branches across the country, our large footprint and decentralized structure allow us to offer our clients a high-touch, relationship-based experience. We stand shoulder-to-shoulder with them and enable them to view their businesses-and their roles as owners-differently. Every business owner is on a journey. BBSI is with them every step of the way. BBSI (Nasdaq) is experiencing a steady rate of growth and is looking for key employees to complement our existing teams. The Risk Consultant role provides leadership to our business-owner clients and our internal team of experts. The BBSI Risk Consultant primary objective is to help business owners maximize their investment in human capital through establishment of best practices, specifically focusing on enterprise risk management and risk mitigation strategies that jointly and positively impact client and BBSI initiatives and profitability. Additionally, the Risk Consultant will partner with client companies to educate and influence them on matters involving the promotion of a proactive risk management culture, occupational health and safety and behavior based safety. This person must demonstrate strong business acumen, an entrepreneurial spirit with a genuine desire to proactively and consistently deliver results for our clients and internal teams. This position is a full time, exempt position that is accountable to the Director of Risk Management, the Area Manager and respective Business Unit(s). Requirements Solid understanding of occupational health and safety principles and practices Experience working in a dynamic team environment Worker's Compensation Claims management and coordination Multi-client consulting experience a must Experience working directly with business owners a plus Understanding of safety culture and ability to demonstrate how to shift one Demonstrated proficiency in conducting root cause analysis for risk mitigation Demonstrated experience with customer collaboration Process Control and Continuous Improvement experience preferred Ability to benchmark, measure, analyze and articulate the value of risk management initiatives, practices and policies At least 10 years of risk management, occupational health and safety and regulatory experience required. Ideally the candidate will have a professional certification(s) such as CSP (Certified Safety Professional), ARM (Associate in Risk Management), RPIH (Registered Professional Industrial Hygienist), CHMM (Certified Hazardous Materials Manager), CIH (Certified Industrial Hygienist), Six Sigma (Black or Green Belt) or an equivalent certification. Candidate must have operations and/or consulting experience Demonstrated ability to write, develop and deliver successful presentations to individuals and groups at all levels of an organization Bachelor's degree required, advanced degree preferred Risk mitigation from insurance industry preferred, but not required Roughly 70% of time spent with clients at their location - primarily local EHS management or EHS mitigation skills include, but are not limited to: Facility, job site and pre-construction surveys Regulatory compliance, including OSHA consultations Driver safety, fleet safety, loss control Return to work programs and implementation Safety champion identification and development Train-the-trainer occupational safety training programs For individuals with these requirements, this position offers: The stability of working for a publicly traded, growth-oriented company Phenomenal work environment where we work hard, have fun, promote growth and development, and build great relationships with solid business professionals Opportunity to impact the success and growth of client companies and BBSI Knowledge that you are working for a results-oriented organization Experience interacting with professionals in multiple industries Salary and Other Compensation: The starting salary range for this position is $83,000-$105,000 annually. Factors which may affect starting pay within this range may include geography, skills, education, experience, certifications and other qualifications of the candidate. This position is also eligible for incentive pay in accordance with the terms of the Company's plan. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, health savings account, flexible savings account, dental insurance, vision insurance, 401(k) retirement plan, accidental death and dismemberment, life insurance, voluntary life insurance, voluntary disability insurance, voluntary accident, voluntary critical care, voluntary hospital indemnity, legal, identity & fraud protection, commuter benefits, pet insurance, employee stock purchase program, and an employee assistance program. Paid Time Off: 40 hours of paid sick leave annually (additional sick/front loading/accrual, if any, based on state or regional requirements); vacation accrues up to 80 hours in the first year, up to 120 hours in years 2-4, and up to 160 hours in the fifth year; 6 paid holidays annually, 4 paid volunteer days annually. Diversity and Inclusion are critical parts of our corporate culture. BBSI strives to create a workplace where everyone feels included and empowered to bring their full, authentic selves to work, and is treated fairly. BBSI is an equal opportunity employer and makes employment decisions on the basis of merit. If you meet the above requirements, we welcome the opportunity to learn more about you. For more information, visit us at www. bbsi.com Please apply via this posting and not by contacting our local or corporate offices. Click here to review the BBSI Privacy Policy: *********************************** California applicants: to see how we protect your data, visit our website at *********************************************************

🚨 We're Hiring: Safety Supervisor 🚨 📍 Location: Ruther Glen, Virginia - Fredericksburg, VA | Industry: Civil Construction | Type: Full-Time | Exempt 👷 ♂️ Be the reason someone goes home safe every day. Are you a safety champion with a passion for protecting people, projects, and progress? At Total Civil Construction & Engineering, we're looking for a Safety Supervisor who leads from the front, inspires accountability, and transforms safety protocols into everyday habits. 🔧 What You'll Do: As a Safety Supervisor, you'll serve as the critical link between field crews and executive leadership, ensuring we don't just meet safety standards, we lead with them: Enforce corporate and project-specific safety and health programs Conduct detailed jobsite audits, safety walk-throughs, and risk assessments Develop and deliver safety training (fall protection, rigging, silica, confined space, GHS, etc.) Create, maintain, and verify site-specific documentation (AHAs, SDS, permits, etc.) Perform incident and accident investigations, collect evidence, interview, report, follow up Collaborate with foremen, PMs, superintendents, and subcontractors to ensure compliance Design advanced safety solutions for lifts, hazardous materials, excavation, and heavy equipment Track and manage training matrix, inspection forms, and safety schematics Stay up to date on OSHA, federal, and local regulations, and ensure we're ahead of the curve Mentor teams and foster a proactive, solution-oriented safety culture Attend daily briefings, safety stand-downs, and orientations across job sites Support WC/claims reporting, root cause analysis, and continuous improvement initiatives 🎓🧠 What You Bring: We're looking for someone who leads by example, trains with passion, and brings confidence to the chaos. Education & Certifications: Bachelor's degree in occupational health & safety, construction management, or related field OSHA 30-Hour Construction Industry (Required) OSHA 510 (Preferred) ASP and/or CHST (Preferred) First Aid/CPR Certification (Required) Fall Protection, Rigging, Confined Space, and Equipment Safety Training Experience & Skills: 2+ years of experience in field-level safety for construction projects Strong knowledge of underground utilities, buildings, and highway construction risks Bilingual English & Spanish - Preferred Proficiency in MS Office, Procore, and digital documentation systems Strong interpersonal skills, leadership presence, and ability to work independently Valid driver's license and clean driving record Must pass government background check and drug and alcohol test (for federal projects) 💼 Perks & Culture: Health, Vision, Dental, and Life Insurance Work with high-impact teams on major civil projects Vehicle, fuel card, PPE & tech tools provided Ongoing training, support & growth into Safety Manager Inclusive, collaborative, and safety-first company culture Drug-Free Workplace | EEO Employer: Veterans, Minorities, Women encouraged to apply

We are looking for a dedicated and knowledgeable Safety Quality Control Manager to join our team on our Ferguson Project located in El Portal near Yosemite National Park. Myers and Sons received a contract to restore full highway access to State Route 140 on the existing alignment that has been blocked by a rockslide that occurred in 2006. The project will consist of building the Rockshed structure, which will be a reinforced concrete box structure supported on concrete piles and anchored to tie backs into the canyon wall. Responsibilities - Maintain Safety and Health Program that meets or exceeds corporate minimum requirements. - Create, communicate, and identify opportunities for improvements in Corporate Safety Program. - Coordinate, schedule, and facilitate all Subcontractors Pre-Construction Safety Planning Meetings acting as a resource for field operations with compliance on Federal (OSHA) and state as well as local safety and health regulations. - Maintain all administrative tasks related to project specific safety documentation/recordkeeping system, including OSHA reports, management reports, training, etc. - Conduct regularly scheduled site evaluations, follow up and tracking of corrections to deficiencies - Attend superintendent meetings and monitor Toolbox Talks/Discussions to ensure documentation and quality - Perform root cause and accident investigation techniques in the event of a job site accident - including collection of safety and health standard incident reporting forms and documentation working closely with local and Risk Management - Ability to conduct in-house training on various health and safety related topics. - Assist with OSHA inspections, compliance reviews, insurance provider reviews/audits, and other federal, state, or local agency reviews/inquiries. Qualifications: 4-year college degree 5 years+ of experience in heavy construction safety Cal/OSHA 30-hour construction training course Certified as a Safety Professional or Construction Health and Safety Technician Traffic control supervision certification Knowledge in safety procedures for all types of work being performed on Ferguson Slide Project Knowledge of Caltrans specifications and plans, Cal/OSHA policy and procedures, and California Code of Regulations Title 8 safety requirements Benefits: Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. Company provided vehicle or car allowance with fuel card Flexible Spending Account (FSA)/Dependent Care FSA 401K with 8% Match Life insurance Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D Paid time off Professional development assistance Work in a collaborative environment that fosters creativity, support and mutual respect. Myers and Sons Construction is a Heavy Civil Construction Company. We specialize in Bridge Construction, Bridge Restoration, Roadway Rehabilitation, Water/Wastewater Treatment Plants, Concrete Bridge Overlays, Concrete Paving and Alternative Delivery Projects, including Design Build, CMGC, CMAR and Progressive Design Build throughout California and Colorado. For more information on our company please visit ****************** Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status.

*LOCAL CANDIDATES ONLY WILLING TO WORK ONSITE* We are seeking a proactive and experienced Safety Manager to lead our safety and compliance efforts at a heavy manufacturing facility. The ideal candidate will be responsible for developing, implementing, and maintaining safety programs to ensure a safe and compliant workplace for all employees, contractors, and visitors. Key Responsibilities: Develop and enforce safety policies and procedures in compliance with local, state, and federal regulations (e.g., OSHA, EPA). Lead and manage programs such as Lockout/Tagout (LOTO), Confined Space Entry, Hazard Communication, PPE, and Machine Guarding. Conduct regular safety inspections, audits, risk assessments, and job hazard analyses (JHAs). Investigate accidents, incidents, and near misses; perform root cause analysis and implement corrective actions. Maintain records of safety inspections, incidents, and training in accordance with regulatory requirements. Coordinate and deliver safety training programs for new hires, ongoing employee development, and contractors. Monitor and report safety metrics (e.g., TRIR, DART, near-miss trends) to senior leadership. Promote a strong safety culture across all shifts and departments through leadership, visibility, and engagement. Prepare for and manage emergency response situations; coordinate with external agencies as needed. Ensure proper use and maintenance of safety equipment and PPE. Manage workers' compensation cases and coordinate with HR and insurance providers as necessary. Qualifications: Bachelor's degree in Occupational Safety, Industrial Hygiene, Environmental Science, Engineering, or a related field (or equivalent experience). 5+ years of safety management experience in a heavy manufacturing, steel, automotive, or industrial environment. In-depth knowledge of OSHA 1910 regulations and best practices in industrial safety. Strong understanding of environmental health and safety standards, industrial hygiene, and ergonomics. Excellent communication, training, and leadership skills. Proficient in incident investigation and root cause analysis methodologies.

Berkel & Company Contractors, Inc. is looking for a Field Safety Specialist to work within our Atlanta Region. This position works with the Superintendent and Project Manager to administer, direct, and implement compliance with Berkel corporate safety policy and to ensure the achievement of company standard operating practices and safety planning goals. Our Field Safety Specialists are responsible for overall safety procedures on multiple project sites within their regional sectors. Responsibilities: Create, communicate, enforce, and identify opportunities for improvements in Site Specific Safety Program Maintain all administrative tasks related to project specific safety binders and filing systems Coordinate, schedule, and facilitate all subcontractors pre-construction safety planning meetings, acting as a resource for field operations with compliance on federal (OSHA) and state as well as local safety and health regulations including NFPA and JCAHO standards Review all Site-Specific Safety Programs and Job Hazard Analysis prior to mobilization Conduct regularly scheduled site evaluations, follow up and tracking of corrections and deficiencies Periodically attend and monitor Tool Box Talks conducted by employees to assure documentation and quality Perform root cause and accident investigation techniques in the event of a job site accident - including collection of Berkel safety standard incident reporting forms and documentation working closely with our Risk Manager Active coordination with Risk Manager for identification of Claims trends and proactive risk management planning Enforce documentation from all staff on the proper training of their employees as related to their scope of work Conduct training for OSHA 10 or 30 Hour, HAZWOPER, and other Safety related topics Job Requirements: 3 - 5 years of work experience in field of Construction Health and Safety Working knowledge of Federal and State safety and health regulations, as well as local building code issues for safety and health OSHA Outreach Trainer for the Construction Industry CHST preferred OSHA 500 preferred Knowledge of drilling operations and/or sheeting and shoring work preferred Demonstrated knowledge of construction best practices Demonstrated experience in leading, motivating, and coaching a large employee base Strong sense of urgency in completing documentation in a timely fashion Must be able to demonstrate incident/injury management skills Excellent oral and written communication and interpersonal skills Strong planning, problem solving, and troubleshooting skills Individual must be highly collaborative and demonstrate positive results in directing people Demonstrated ability to communicate effectively, both verbally and in writing to all levels of an organization Capacity to coordinate efforts involving staff from different departments and external partners Extensive travel. Travel demands may include, but are not limited to, traveling to various states for multiple projects (flights and driving), sitting in on a project as a full-time site safety supervisor, and traveling to other regions to assist other safety managers EOE/Minorities/Females/Veterans/Disability (Compliant with the new VEVRAA and Section 503 rules)

Safety Department About The Role We are looking for an Assistant Safety Director to join our Safety team on our project in Ashburn, Virginia. This is a full-time, in-person position. Key Responsibilities Lead and manage on-site safety efforts on large-scale mission-critical, aviation, and other complex market types by working collaboratively with project superintendents, project managers, and client safety representatives to execute Holder's “Plan. Execute. Learn” Safety Culture Utilize and implement industry best practices to promote a world-class safety culture focused on preventing SIFs Manage and mentor trade partners to implement robust and effective safety programs on site Share and provide technical knowledge with the project team to proactively manage hazardous energy control, crane lifts, and other high-risk activities by ensuring appropriate safety controls are in place Manage site-specific insurance programs and assist with case/injury management Track and trend safety data to help proactively manage safety efforts Manage safety material and equipment procurement to support project needs and Holder self-perform work Monitor daily construction activities for compliance with OSHA and company rules/policies Manage and coordinate on-site training, wellness, and Holder/client-driven initiatives Qualifications Required: 5-15 years of construction safety experience managing complex, large-scale projects including mission-critical, heavy industrial, oil/gas, etc. Formal safety training and competency in hazardous energy control and LOTO, scaffolding, crane management, steel erection, emergency response, fall management, excavation and confined space, rigging, hazardous waste, and NFPDS/erosion control Ability to identify and correct safety deficiencies in the field Excellent interpersonal skills with the ability to interact effectively with employees at all levels in a construction environment Strong communication skills across all levels of the organization Proficiency with Microsoft Office applications including Word, Excel, PowerPoint, and other technology applications used to support safety efforts Preferred Experience with a general contractor and managing large safety teams Bachelor's degree, preferably in Safety Management Professional safety certifications (e.g., CSP, CHST, SMS)

Job Title: Safety Professional Reports To: Corporate Safety Manager FLSA Status: Exempt The Safety Professional is responsible for a multitude of items ranging from safety, equipment issues, quality of workmanship, technical training and the efficient distribution of tools and equipment. Responsible for promoting exceptional Safety/Quality teamwork with INTREN operations teams at customer work sites. This position assists in resolving process problems and performs safety evaluations and workmanship audits, and promotes improved performance by providing mentoring, coaching, and training. ESSENTIAL FUNCTIONS: INTREN Operational Performance: Field Support Perform regular jobsite inspections of all crews to identify unsafe conditions and unsafe work practices. Consistently and fairly enforce all company safety rules. Work with managers and supervisors to apply the proper company disciplinary procedures for those employees who violate safety rules. Ensure OSHA, EPA and DOT compliance. Ensures Damage Prevention standards are utilized and effective. Responds to events as necessary to manage response, site safety, customer interface and preliminary investigation. Ensure that BASE is contacted per procedure for all applicable events. Resolution of any equipment and vehicle issues which may include: compliance with maintenance programs; recommendations of needed repairs; driver qualifications; ensure accurate registrations; DOT inspections and proof of insurance; monitoring annual inspections of company vehicles. May conduct small tool inventories. Partners with utility companies concerning construction standard issues. May assist other Field Support Coordinators from other areas as needed. Training Performs initial training for all field related new hires. Perform regular safety training sessions and hold toolbox talks with crews at show-ups or on jobsites. Monitors the training needs of the workforce and helps develop, present and keep records for all training. Conduct subcontractor training. Safety Performance Monitors the completion and effectiveness of all safety programs. Responsible for incident and accident investigations. Provide root cause analysis on all incidents and accidents. Evaluate and monitor quality of workmanship. Be knowledgeable in applicable ANSI, EPA, OSHA, and other applicable standards. Ensure compliance with equipment maintenance programs. Loss Prevention Management Responsible for carrying out all loss prevention programs, policies, and procedures, congruent with company objectives and culture. Assist in internal and external investigations, and make recommendations to management as necessary. Conduct safety & quality audits when necessary. Oversee and monitor driver risk management program. May provide loss prevention training. Conducts joint investigations with client security representatives, including but not limited to driver, facility, employee, agent, third party and external investigations. Maintains positive interaction with local, state and federal law enforcement agencies to assist in common loss reduction goals. Actively coordinates and assists management with strategies and solutions for security related matters. Implements and adapts security requirements for sub-contractors. Assists management when security incidents occurred and supervises the execution of agreed corrective actions. Executes security audits. DESIRED MINIMUM QUALIFICATIONS: BA/BS in Risk Management Discipline (Safety, Quality, Environment, Criminal Justice) and 3 years' experience or minimum of 5-10 years of Foreman or General Foreman experience. Prefer a candidate with knowledge of the natural gas, electrical or underground/overhead utilities. Excellent interpersonal & communication skills, able to work and communicate at all levels. Computer skills in most Microsoft programs. INTREN is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

The Safety Specialist reports directly to the Vice President of Safety and Team Development but will maintain and plan daily schedule with the appropriate Project Manager(s). The Safety Specialist must possess a higher level of integrity, discipline, accountability, and professionalism than their peers. They must be a steward of the Buesing Corp Company culture, Inversion and Perspective-Based Safety, and must always display the Company Core Values (Behavioral Excellence, Safety, and Teamwork) . The Safety Specialist must work well unsupervised and have above average written and spoken communication skills. FIELD SAFETY RESPONIBILITES Work closely with project leadership, safety team members, and General Contractor staff to maintain high levels of quality work performed safely Conduct field safety audits of Buesing project sites and provide relevant feedback to appropriate personnel Attend select Toolbox Talks, stand downs, and safety celebrations Provide replacement PPE and necessary safety equipment to field operations Assist with incident investigations and subsequent reports Properly maintain assigned equipment, including company vehicle (if applicable), electronic media, and PPE Facilitate drug and alcohol testing when deemed appropriate by management Assist with post employee injury related matters, including facilitating clinic visits, employee transportation, and follow up appointments Provide fill-in duties for qualifying Team members when necessary ADMINISTRATIVE RESPONSIBILITIES Manage inventory of safety related items, including item procurement and proper invoicing Maintain incident chronology and ensure appropriate corrective/preventative actions are completed Provide applicable safety-related training to employees Work closely with the HR, Recruiting, and Training representatives to ensure Team congruity and proper record keeping COMPENSATION Competitive salary and benefit package Background check and drug screening is required. Must be legally authorized to work in the United States, Buesing Corp does not sponsor employment visas. *This is a safety sensitive position.

The Safety Professional is responsible for a multitude of items ranging from safety, equipment issues, quality of workmanship, technical training and the efficient distribution of tools and equipment. Responsible for promoting exceptional Safety/Quality teamwork with INTREN operations teams at customer work sites. This position assists in resolving process problems and performs safety evaluations and workmanship audits, and promotes improved performance by providing mentoring, coaching, and training. ESSENTIAL FUNCTIONS: INTREN Operational Performance: Field Support Perform regular jobsite inspections of all crews to identify unsafe conditions and unsafe work practices. Consistently and fairly enforce all company safety rules. Work with managers and supervisors to apply the proper company disciplinary procedures for those employees who violate safety rules. Ensure OSHA, EPA and DOT compliance. Ensures Damage Prevention standards are utilized and effective. Responds to events as necessary to manage response, site safety, customer interface and preliminary investigation. Ensure that BASE is contacted per procedure for all applicable events. Resolution of any equipment and vehicle issues which may include: compliance with maintenance programs; recommendations of needed repairs; driver qualifications; ensure accurate registrations; DOT inspections and proof of insurance; monitoring annual inspections of company vehicles. May conduct small tool inventories. Partners with utility companies concerning construction standard issues. May assist other Field Support Coordinators from other areas as needed. Training Performs initial training for all field related new hires. Perform regular safety training sessions and hold toolbox talks with crews at show-ups or on jobsites. Monitors the training needs of the workforce and helps develop, present and keep records for all training. Conduct subcontractor training Safety Performance Monitors the completion and effectiveness of all safety programs. Responsible for incident and accident investigations. Provide root cause analysis on all incidents and accidents. Evaluate and monitor quality of workmanship. Be knowledgeable in applicable ANSI, EPA, OSHA, and other applicable standards. Ensure compliance with equipment maintenance programs. Loss Prevention Management Responsible for carrying out all loss prevention programs, policies, and procedures, congruent with company objectives and culture. Assist in internal and external investigations, and make recommendations to management as necessary. Conduct safety & quality audits when necessary. Oversee and monitor driver risk management program. May provide loss prevention training. Conducts joint investigations with client security representatives, including but not limited to driver, facility, employee, agent, third party and external investigations. Maintains positive interaction with local, state and federal law enforcement agencies to assist in common loss reduction goals. Actively coordinates and assists management with strategies and solutions for security related matters. Implements and adapts security requirements for sub-contractors. Assists management when security incidents occurred and supervises the execution of agreed corrective actions. Executes security audits. DESIRED MINIMUM QUALIFICATIONS: BA/BS in Risk Management Discipline (Safety, Quality, Environment, Criminal Justice) and 3 years experience. OR Minimum of 5-10 years of Foreman or General Foreman experience. Prefer a candidate with knowledge of the natural gas, electrical or underground/overhead utilities. Excellent interpersonal & communication skills, able to work and communicate at all levels. Computer skills in most Microsoft programs. INTREN is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Pay Rate: $55-$65 per hour + $100 per day per diem Schedule & Hours: 5x8s (Monday-Friday, 5:00 a.m. - 1:30 p.m.) Must Haves: OSHA 30 CPR/AED certified CHST or CSHO or SCS (Construction Safety credential) Safety knowledge in: Crane operation Hazcom Excavation Strong field presence and communication with craftsmen and leadership Nice to Have: OSHA 500 or 510 Prior experience in electrical construction safety Spanish-speaking Previous experience at airports or large transportation networks Safety Manager We're seeking a hands-on Safety Manager to support active construction work at Burbank Airport. You'll work directly in the field alongside union electrical crews to ensure safe operations across crane, trenching, confined space, and electrical activities. This role is perfect for someone who enjoys being in the field, interacting with crews, and driving safety culture through daily audits and communication. You'll collaborate with a Site Safety Manager, perform safety inspections, and support site compliance training. What You'll Do: Conduct daily field audits and safety inspections Support electrical and crane operations with proactive hazard prevention Monitor compliance for trenching, confined space, and excavation safety Partner with site management to reinforce safe work practices What We're Looking For: OSHA 30 + CPR/AED CHST or CSHO certification preferred Experience with crane operations, excavation, and HazCom standards Strong communicator with a professional field presence Union site experience a plus but not required Schedule: Monday-Friday, 5:00 a.m.-1:30 p.m. Contract Duration: 12 months

Cherry City Electric is accepting applications for a full time Site Safety Coordinator to oversee safety activities at the project level in Oregon. This position will require a hands-on individual who can meet the job duties listed below and work with project safety management and supervision. The Site Safety Coordinator will manage safety operation activities on a large-scale construction project. We are looking for a dynamic person with good communication and people skills who want to learn and expand their talents. We are looking for the right person who is willing to learn and is compassionate about having an impact on the safety of others. Responsibilities: Conduct onsite safety and orientation for onsite CCE personnel per CCE requirements Leading the daily stretch and flex with the crew Conducting and documenting safety meetings Daily site safety walks Daily documentation of safety audits Attending jobsite safety meetings Safety walks with the general contractor and owner Incident and accident investigations Have the ability to recognize and correct safety hazards Requirements: Understanding of OSHA regulations STSC (Safety Trained Supervisor Construction) certification CHST, CSP certification preferred OSHA 30-hour construction safety class Certifications in CPR and First Aid 5 years of construction experience Able to work in a group setting with multi-parties Good people and customer service skills A can-do attitude with good communication skills Willingness to learn additional safety processes Benefits: Competitive compensation packages Medical and Dental Benefits Basic Life Insurance Long Term Disability Insurance Flexible Spending Account Wellness Program 401-K Plan that matches up to $6,000 per employee annually 8 paid holidays Your birthday as a paid holiday 3-4 weeks paid vacation/personal time off depending on years of employment Cherry City Electric provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

About Us Ventana designs, supplies, and installs high-performing curtain wall facade systems. By working closely with the design team, we can ensure a competitively priced facade that is water and air-tight and allows for optimal thermal control of the interior space. Traditionally, the facade is one of the major risk factors on any building, and the team at Ventana has a proven history of taking the risk and delivering superior facade systems that guarantee long-term performance. The Role We Want You For The Site Safety Supervisor will provide support to the Project Staff and the Ventana safety team in an effort to execute corporate safety and health standards and procedures in compliance with Federal, State, and Local requirements. In addition to your project responsibilities, you shall participate in and complete all assignments designated to you. This will include, but is not limited to, assisting in development of a zero injury safety culture on each project, conducting at least weekly documented jobsite safety inspections, effectively communicate orientations for all new project workers, assist with and review subcontractor daily pre-task safety analysis, actively promote and participate in daily stretch and flex program, identify project trends and execute proactive safety initiatives to eliminate incidents, support corporate goals and initiatives, emphasize and support proactive safety such as near miss/hazard reporting, coach and recognize workers on safe work methods, report all incidents in an effective and timely manner following established protocols and be a champion in motivating workers to perform their jobs safely! Your responsibilities will be all encompassing for each project you will be dedicated to. The Specifics of the Role Assist in development of the project safety program. Establish and conduct jobsite orientation for new project employees. Administer and record their participation in the orientation program and issue identification to those employees completing the orientation program. Attend all initial meetings with the project staff and subcontractor representatives to clearly define their role within the confines of the project safety program. Conduct and document pre-planning safety meetings with each subcontractor representatives to establish safety procedures prior to subcontractor's activity on site. Field tasks solo on a project Up to $80M. Client interfacing. Assist Site Safety Manager. Establish and conduct regular (weekly) safety meetings with subcontractor representatives and with project staff to ensure proper compliance. Facilitate training for site personnel and ensure that standards are per the OSHA\Clayco and in compliance with Federal and State standards. Ensure and maintain a log of each subcontractor toolbox safety meeting. Review each subcontractor's safety program and ensure that it meets or exceeds the project safety program requirements. Ensure that each subcontractor designates a safety representative that is properly trained in subcontractor's scope of work and has the proper authority to correct safety issues. Conduct regular daily and weekly jobsite inspections and complete the safety checklist noting safety violations and corrective actions. Record, notify and prepare written report of any violations or unsafe practices to subcontractors for immediate correction actions. Stop at once any violation or unsafe acts or practices. Assist the Project Superintendent in establishing and implementing proper fire prevention, evacuation, and fire control procedures. Investigate all incidents and generate proper reports. Establish and maintain all required safety records. Conduct a monthly overview safety meeting and attend project staff meetings to brief on safety issues. Perform other duties as necessary. Requirements Bachelor's Degree in Safety, Environmental Health & Safety, Occupational Health and Safety, or equivalent. 0-5 years of safety experience with a working knowledge of safety/environment principles and techniques. 2-3 years of field experience required. OSHA 30-hour construction accreditation. OSHA 500 Outreach Trainer is a plus. Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Occasionally lift and/or move up to 50 pounds. Able to work at heights, able to climb ladders, access/inspect scaffolding and roof areas. Noise level is usually moderate to very loud. Computer skills with familiarity with Microsoft Office. Physical Requirements Must possess the physical ability to safely navigate active construction sites. This may include but is not limited to climbing permanent and temporary stairs or ladders, using construction personnel hoists, ascending and descending ladders, and maneuvering through areas under construction. Use of personal protective equipment (PPE) may be required. Must be able to walk long distances, stand for extended periods without support, and work at various heights as required. Ability to access and inspect elevated areas such as scaffolding, rooftops, and other high structures. Possess sufficient visual acuity to perform essential job functions such as, close vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to occasionally lift and/or move items weighing up to 50 pounds. Exposure to varying noise levels ranging from moderate to high, which may require the use of personal protective equipment (PPE). Must be able to work in a variety of environmental conditions, including extreme heat, cold, rain, snow, and other unpredictable weather. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! Why Ventana and Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Environmental Health Safety Technician Reports To: Director of Environmental Health Safety Department/Location: Burlington, MA FLSA Status: Exempt Job This position requires the ability to work both independently and under the direction of the EHS Lead and EHS Director. The EHS Technician is responsible for ensuring compliance with environmental, health, and safety regulations while supporting project job sites. This role may also temporarily serve as the onsite EHS representative at job sites as needed. Essential Functions & Key Responsibilities Provide EHS support to manufacturing, construction, and services functions. Ensure the proper maintenance and calibration of industrial hygiene equipment. Conduct industrial hygiene assessments and provide written reports of findings. Perform routine inspections of shop locations and project job sites to ensure compliance with regulatory requirements and NELCO policies. Participate in EHS reviews of operations and project pre-mobilization meetings. Track and follow up on action items to ensure the completion of corrective actions. Support project teams in developing site-specific safety plans. Develop Job Hazard Analyses. Manage employee training and certification calendars, ensuring employees remain current with requirements. Assist in the development of EHS training programs and conduct training as needed. Manage the employee safety boot program and the prescription safety glasses program. Oversee the procurement of EHS equipment and supplies. Participate in EHS incident investigations and contribute to corrective actions. Will assist as needed with the upkeep and use of EHS software systems such as Salus and Intelex. This may include data entry, data analysis, corrective action tracking, training employees how to utilize the software, and notifying employees and managers of outstanding tasks. Supervisory Responsibility N/A Qualifications, Skills & Abilities Bachelor of Science degree in EHS or a related field preferred; relevant work experience may be considered in lieu of a degree. Ability to work independently with minimal supervision. Strong interpersonal and written communication skills. Familiarity with industrial hygiene air sampling equipment and methods. Proficiency with computer systems, including web-based applications and Microsoft Office applications (Outlook, Word, Excel and PowerPoint). Ability to operate basic machinery and tools in routine situations; specialized training is not required. Willingness to travel 25-50% of the time. Ability to access and navigate construction job sites to perform industrial hygiene surveys, inspections, and employee training. Required to use or wear personal safety equipment, including job site PPE such as long pants, safety-toed boots, safety glasses, a helmet, a safety vest, and hearing protection. Follows established procedures and guidelines, sets priorities, and organizes work within general parameters. Seeks assistance when faced with difficult or unpredictable situations; work progress is regularly monitored by the EHS Lead and EHS Director. Physical Demands/Work Environment Regularly operates a computer and standard office equipment, including copy machines, phones, fax machines, and printers. Light work, requiring exertion of up to 20 pounds of force frequently to move objects. While some tasks are sedentary, the role requires periods of standing and moving throughout the premises. Must be able to travel 25-50% of the time and navigate construction job sites and manufacturing facilities. Must be able to wear personal protective equipment (PPE) on job sites, including safety-toe work boots, safety glasses, a safety helmet, long pants, and hearing protection. May be periodically exposed to noise and other potential hazards within permissible exposure limits (PEL). Jobsite conditions may involve exposure to outdoor weather conditions. Must be able to interact effectively with employees at all levels and external customers. Operates industrial hygiene monitoring equipment. Must be able to research and interpret federal, state, and local EHS regulations, including OSHA and EPA regulations. Primarily operates in a clerical office setting with a moderate noise level. Compensation Compensation for this position ranges from $50,000 to $60,000, based on the candidate's experience and background. The above statements are intended to describe the general nature and level of work being performed by people assigned to do this job. The above is not intended to be an exhaustive list of all responsibilities and duties required. External and internal applicants, as well as position incumbents who become disabled as defined under the Americans with Disabilities Act, must be able to perform the essential job functions (as listed) either unaided or with the assistance of a reasonable accommodation. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of this job.

Minimize the risk of job-related accidents; monitor operations to eliminate hazardous activities; develop policies to promote occupational health and safety (OSHA) awareness. Associate Safety coordinators should be developing firm understanding of all OSHA dictations; focused on prevention; need to be diligent and analytical; possess a keen eye for detail and a sensitivity for potential dangers. SME Steel Contractors has provided comprehensive structural steel fabrication and erection since 1992 and is one of the largest fabricators/erectors of structural steel in the United States. Driven to be different from all others, SME is a division 5 company with a commitment to safety, value, and innovation. Visit ********************* to learn more. SME Steel Contractors is a division of SME Industries, Inc. Why Join Us? Health and Wellness Benefits including Medical, Dental, Vision, Short Term Disability and Life Insurance. Financial Benefits including competitive compensation and 401(k) plan. Additional Benefits including Paid Holidays and Paid Time Off, Employee Assistance Program, and more. Essential Duties and Responsibilities: Participate with safety coordinator in activities to minimize safety risks on operational processes Learn the process to develop and enforce OSHA policies (e.g. accident reporting process) Participate in accident investigation Keep records of safety-related incidents and propose corrective actions Assist in organizing and developing OSHA training plans Collaborate with managers to monitor compliance and identify safety issues Intervene in unsafe activities or operations Liaise with and report to official regulatory bodies on OSHA matter Organize and conduct OSHA training plans Report on health and safety awareness, issues, and statistics Recommend solutions to issues, improvement opportunities or new prevention measures Monitor compliance to policies and laws by inspecting active worksites with shop safety representatives Other duties as assigned Qualifications: Proven interest in safety efforts and programs Proficient in MS Office Excellent communication and advisory skills Diligent with an analytical mind Valid qualification in occupational health and safety BSc/BA in safety management or relevant field is a plus Certified Safety Professional a plus Exceptional communication and interpersonal abilities Outstanding attention to detail and observation ability Excellent organizational and motivational skills Ability in producing reports and developing relevant policies Knowledge of data analysis and risk assessment PHYSICAL DEMANDS: Must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities. Ability to lift and carry up to 50 pounds regularly and up to 65 pounds occasionally. Must be able to stand, kneel, bend, twist, and reach for extended periods. Physically fit to work in an industrial environment and tolerate exposure to varying physical conditions. Must be able to work extended hours when necessary. Manual dexterity and hand-eye coordination to operate tools, equipment, and safety devices. Tolerance to loud noises, vibrations, dust, heat, and fumes within a fabrication shop environment. Ability to wear required PPE (Personal Protective Equipment) includes safety glasses, gloves, steel-toed boots, high visibility clothing, and hearing protection. WORK ENVIRONMENT: Industrial warehouse and manufacturing environment with heavy machinery, and overhead cranes. Strict adherence to safety procedures and use of PPE is mandatory at all times. Frequent interaction with production staff, supervisors, safety personnel, and quality control teams. Exposure to hot and cold temperatures, depending on seasonal conditions. Position Responsibilities:This job posting reflects the current assignment of essential functions and is not meant to be all-inclusive. Duties and responsibilities may be assigned or reassigned to this position at any time. Equal Employment Opportunity: SME Industries, Inc. and its divisions (SME Steel Contractors, Southwest Steel, CoreBrace, DuraFuse, and SME Logistics) is an Equal Opportunity (EEO) Employer. All qualified applicants will receive consideration without regard to race, color, national origin, sex, sexual orientation, gender identity, religion, age, status as a protected veteran, status as an individual with disability, or any other protected group status or non-job-related characteristic as directed by law. Employment Authorization: Applicants must be legally authorized to work in the United. Proof of eligibility will be required upon hire.

Safety Manager - Civil Site Development Brent Scarbrough & Co. (BSC) is currently seeking an experienced Safety Manager & Trainer to support our ongoing growth as a leading Site Development contractor in the southeast. The Safety Manager & Trainer will provide management, leadership, direction and support to our project teams across multiple sites in providing an exceptional safety culture and workplace where no one gets hurt. Current Locations: HQ Office Location in Newnan, GA with project locations throughout the Southeastern U.S. RESPONSIBILITIES For Safety Management: · Oversee, lead, and manage the implementation of the BSC Safety Program and develop site-specific safety plans across multiple project sites · Plan, lead, and manage safety program elements and initiatives, collaborating with trade partners and joint-venture partners · Conduct and review site hazard assessments, develop safety orientation content, and identify and conduct necessary safety training · Oversee project documentation, tracking, and analysis of safety statistics, trend analyses, and OSHA reports, and lead improvement action plans · Monitor onsite construction activities, document deficiencies and corrective actions, and lead incident reporting, investigation, and analysis · Collaborate with Safety Director and Risk Management, review project work plans, and participate in project planning and hazard analysis · Provide direction and mentorship to Safety staff, act as a resource for safety issues, and maintain knowledge of safety standards and regulations · Support safety performance metrics, assist in incident response, and build relationships with diverse backgrounds and organizational levels For Training: · Develop, customize, and implement safety training programs tailored to site, and client requirements. · Conduct engaging and interactive training sessions, including classroom lectures, on-site demonstrations, and hands-on activities. · Educate employees on safety policies, procedures, OSHA regulations, and best practices for risk prevention. · Perform regular assessments of training effectiveness and make improvements as needed. · Stay updated on local, state, and federal safety regulations, integrating changes into training programs. · Collaborate with project managers and site supervisors to identify specific safety needs and hazards. · Maintain records of employee training and certifications, ensuring documentation is accurate and up-to-date. · Conduct incident reviews to reinforce lessons learned and update safety protocols accordingly. QUALIFICATIONS · Bachelor's degree in safety, occupational health, or related field **OR** · High school diploma with CHST, OSHA 500, and five years of construction experience leading crews and planning work or five years as a dedicated construction safety professional · Proven experience in construction safety training or a related field. · Strong knowledge of OSHA standards, construction safety regulations, and industry best practices. · Excellent presentation and communication skills, with the ability to engage diverse audiences. · Relevant certifications, such as OSHA Outreach Trainer or Construction Health and Safety Technician (CHST), preferred. · Valid driver's license · Detail-oriented with the ability to organize and manage multiple project teams · Proficiency in Microsoft Office and relevant safety software programs · Strong interpersonal skills, positive attitude, professional customer service skills, and effective public speaking and presentation skills · Ability to travel Benefits: 401(k) AD&D insurance Dental insurance Disability insurance Employee stock ownership plan Health insurance Health savings account Life insurance Vision insurance Schedule: Monday to Friday Weekends as needed

Safety Manager Our client is looking to hire a Safety Manager who is primarily responsible for an assigned regional area and may oversee corporate safety programs. This position provides management, coordination, and technical expertise in all areas of safety, health, and environmental compliance. This position assists in the development and administration of safety policies and procedures, initiatives, and training programs to ensure that safety policies and practices are followed consistently. The Safety Manager will assist in establishing reliable methods for improving safety performance and creating a safe and healthy work environment for all employees, fostering a culture of safety, accountability, and compliance. Job Responsibilities: Perform a gap analysis of the client's safety program to correctly identify exactly what the client's needs are Work with clients in developing processes and procedures that effectively accomplish the goal of zero accidents Routinely inspect projects to identify and abate potential hazards on both construction and general industry projects Develop and conduct training programs for existing and new policies and procedures Investigate all accidents and near misses to determine the root causes and make appropriate changes in policies and procedures to prevent reoccurrence of similar hazards Write project specific safety plans and job hazard analysis as required by the client Oversee, monitor, and ensure the completeness and accuracy of accident reports and investigations Act as an advocate for the client by maintaining a value of good corporate ethics and promoting safety, at every opportunity, as a core value of the organization Job Requirements: Bilingual in English and Spanish REQUIRED Professionalism in a corporate function environment Minimum of 5 years of construction safety experience Knowledge of the OSHA Construction Standards CFR 1926, General Industry Standards CFR 1910, and other best management practices Knowledge of typical construction processes Strong background in use of technology and software applications Computer skills using SharePoint and MS Office, including Excel Technical writing capabilities of developing policies and procedures for clients Up to 25% travel required Must be local to Atlanta, GA or willing to permanently relocate to the area Physical Requirements: This is a safety-sensitive position and will require drug screening and a background check The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, employees are frequently required to stand, walk, sit, climb, use hands and arms, reach, and talk or hear. They are regularly required to balance, stoop, kneel, or crouch. They must frequently lift and/or move up to 25 pounds and occasionally lift or move up to 75 pounds. Specific vision abilities include accurate near and distant vision. CORE Safety Group offers competitive pay and benefits, work/life balance, and a fun team environment. AA/EOE. E-Verify employer.

(Commercial/Industrial Roofing) CentiMark Corporation, the nation's leader in commercial and industrial roofing, has an immediate full-time opening for a Branch Safety Inspector to cover our Spec Division office. Job Qualifications: * Must have good working knowledge of roofing procedures and safety * Knowledge and understanding of OSHA Regulations * Excellent communication/ writing skills * Analytical, leadership, interpersonal, problem solving, and organizational/ time management skills * Excellent follow up skills * 5 years roofing/ construction experience preferred * Valid state driver's license in good standing required * Bilingual (English/Spanish) preferred, not required Job Requirements: * Overnight travel * Assist in setting up fall protection, pre-job inspections, and job planning meetings * Sign off on all deck replacement fall protection plans * Perform safety inspections on all crews (including Service) to check compliance * Check Fall Plans, Toolbox Talks, and other safety documents required on site * Address all safety violations in compliance with CentiMark Safety Rules or Policy * Review inspections with crews and cover safety awareness messages * Report inspection results on a weekly basis to the Regional Manager * Serious violations must be reported immediately * Assist in conducting Monthly & Quarterly training meetings CentiMark is an Equal Opportunity & Drug Free Employer offering a great work environment, challenging career opportunities, competitive compensation, and benefits that include: * Medical, Prescription, and Dental insurance * Life Insurance * Paid Holidays and Vacation * Short-term Disability * 401K with Company Match * Employee Stock Ownership Program (ESOP) * Opportunities for Advancement If you are looking for a stable, growth-oriented career, please apply. For more information, please visit us on the web - ***************** Drug Free Workplace - EOE (M/F/V/D) - E-Verify Employer Interested qualified candidates should contact: Robert Wilson @ ************ OR Email: [email protected]