Chemical engineer jobs near me - 583 jobs

Job Title: Industrial/ Manufacturing Engineer Employment Type: Full-Time We are seeking a highly skilled Industrial/Manufacturing Engineer to support our production operations in Raymond, Ohio. This role focuses on optimizing manufacturing processes, developing tooling and fixture solutions, and supporting welding-related engineering activities across the plant. The ideal candidate will bring strong hands-on engineering expertise, a continuous-improvement mindset, and the ability to work collaboratively with cross-functional teams to enhance quality, safety, and efficiency on the shop floor. Key Responsibilities Process & Manufacturing Engineering Analyze, develop, and improve manufacturing processes to increase productivity, reduce waste, and enhance overall operational efficiency. Perform time studies, workflow analysis, and capacity planning to support production scaling and line balancing. Develop and maintain standardized work instructions, process documentation, and manufacturing guidelines. Tooling & Fixture Development Design, specify, and validate tooling, jigs, and fixtures required for assembly, fabrication, and welding operations. Collaborate with tool shops and suppliers for fabrication, trials, modifications, and implementation of fixtures. Conduct fixture capability studies and ensure tools meet quality, safety, and ergonomic requirements. Welding Engineering Support Provide technical expertise for welding processes (MIG/TIG/spot welding), weld sequence optimization, and weld quality improvement. Support welding equipment setup, parameter development, and troubleshooting. Work with quality teams on weld inspections, defect reduction initiatives, and compliance with welding standards. Continuous Improvement (CI) & Lean Initiatives Implement Lean Manufacturing and Six Sigma methodologies to drive continuous improvement. Lead Kaizen events, root-cause analysis, PFMEA reviews, and corrective action implementation. Identify automation opportunities and support integration of robotics, welding automation, or material-handling improvements. Cross-functional Collaboration Work closely with Production, Quality, Maintenance, and Safety teams to resolve issues and support daily operations. Provide engineering guidance during new product launches, process changes, and equipment commissioning. Support APQP activities, PPAP documentation, and process validation. Qualifications & Experience Required Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or related field. 3-7 years of experience in a manufacturing environment, preferably automotive or heavy industrial. Hands-on experience with tooling, jigs, fixtures, and welding processes. Strong understanding of Lean Manufacturing principles, process flow, and industrial engineering fundamentals. Proficiency in CAD software (SolidWorks, AutoCAD, or similar). Familiarity with PFMEA, control plans, work instructions, and related engineering documentation. Preferred Experience with robotic welding systems or automated welding lines. Knowledge of GD&T and precision fixture design. Working experience with PLC-controlled equipment or automation integration. Certification in welding engineering or Six Sigma (Green Belt or above).

**Must Have Experience in Complex Manufacturing Operations** Continuous Improvement Engineer Responsibilities: Facilitate cross-functional expert teams to drive breakthrough or Best-in-Class performance in People, Quality, Material Flow, and Cost. Identifies key individuals for team membership and secures their approval to become team members. Provides basic Six Sigma training to project team members. Applies Six Sigma tools and techniques to measure, analyze, improve and control project processes. Reports on project progress to Champion and other appropriate leadership levels at least on a monthly basis. Prepares detailed plans to track project performance and assure timely completion and achievement of quality and savings goals. Identifies barriers to project success and solicits help from champions when needed. Attends required training and acquires needed skills. Documents improvement process learning and shares best practices with other Black Belts. Identifies and brings forward to Champion new project opportunities. Accountable to impact on Operational Cost. Complies with all Company Safety policies, procedures and rules. Continuous Improvement Engineer Education and Qualifications: Bachelor's Degree required (Engineering discipline preferred). Must have recent experience in a manufacturing plant preferably in the Automotive industry. Strong communication, presentation, and teamwork skills. Demonstrated high-level performance. Has the initiative to drive change and is motivated to exceed expectations. Possess basic statistical knowledge and the ability to apply statistics to product and process improvement projects. Excellent analytical skills. Six Sigma Green Belt certification is preferred.

Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth. Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process. This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers. Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers. This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH. Responsibilities: Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials. Education and Experience: Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management. Skills and Qualifications: Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word. Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits. Travel: Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%). Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to: Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance Salary Range: $110,000 - $125,000 plus annual company bonus program Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth. Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process. This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers. Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers. This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH. Responsibilities: Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials. Education and Experience: Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management. Skills and Qualifications: Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word. Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits. Travel: Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%). Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to: Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance Salary Range: $110,000 - $125,000 plus annual company bonus program Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

Process Engineer / Specialist (Instrumentation and Controls) Full-Time, Permanent Any state in which Graymont has operations The Process Engineer / Specialist (Instrumentation & Controls) provides technical expertise and ongoing support for process automation, control systems and remote operations systems across Graymont's network of lime manufacturing facilities. This role ensures safe and effective operation of Supervisory Control and Data Acquisition (SCADA) systems, Model Predictive Controls (MPC), High Performance Human Machine Interface (HPHMI), alarm management systems and portable devices. This position also supports continuous improvement initiatives in process performance and reliability. The role involves a high degree of collaboration with a diverse group of cross-functional stakeholders such as: Remote Operations, Facility Operations, Information Systems, HSE, Project Engineering and Maintenance. A high degree of understanding of manufacturing processes & equipment, product quality, control philosophies, and associated Graymont standards and industry best practices are essential. Responsibilities: * Ensure safe work practices and implement safeguards to mitigate hazards and prevent incidents. * Collaborate with relevant teams to ensure compliance with health, safety, environmental regulations, and quality standards. * Serve as a primary interface with Remote Operations and plant facilities, ensuring automation and controls function as designed and support continuous improvement initiatives. * Work closely and in collaboration with controls engineers, process engineers, integrators/contractors, Information Services, and Remote Operations as needed. * Maintain and enhance SCADA systems at Graymont facilities, including graphical HPHMI, alarm management, reporting, and effective communication with Remote Operations and plant facilities. * Test and support MPC systems and HPHMI, ensuring documentation is current and change management processes are followed. * Develop a thorough understanding of plant operations and existing systems (control, network, data management, etc.). * Analyze instrumentation, tune control loops, and optimize advanced and expert control systems (MPC). * Ability to work irregular hours or provide on-call support during project implementation or to address issues at plants or ROC operations. * Travel throughout North America (US & Canada) to provide hands-on support to sites. Qualifications: * Education: Bachelor's degree in a related engineering field: Controls and Instrumentation, Electrical, Mechatronics or a related field with a combination of controls and automation experience. * Professional Experience: Minimum 2 years of experience in controls and/or process engineering within the lime or a comparable industry. * Technology Requirements: Proficiency in control disciplines, including Model Predictive Control (MPC), Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), Supervisory Control and Data Acquisition (SCADA) * Experience with Ignition by Inductive Automation and Rockwell products (PLCs, drives, sensors, networks, etc.) * Additional Assets: Experience with Ignition by Inductive Automation and Rockwell products (PLCs, drives, sensors, networks, etc.). * Travel: This position can require frequent travel based on business and operational needs throughout the U.S. and Canada and can be up to 50%. Who You Are: * Effective Communicator: You are an active listener who can communicate effectively with different audiences in diverse situations. * Collaborative: You thrive in a multi-disciplinary team environment and believe that we can get further, faster by working together. * Strong Work Ethic: You demonstrate reliability, responsibility, and a strong commitment to delivering high-quality results. Who We Are: Founded in 1948, Graymont is a trusted global leader in essential calcium-based solutions. Professionally managed and family-owned, we proudly serve a wide range of markets, customers, and communities in North America and Asia Pacific. Graymont is also the strategic partner of Grupo Calidra, the largest lime producer in Latin America. Graymont's strategy is anchored in its strong commitment to its core values of integrity, respect, teamwork, innovation, excellence, accountability, and long-term perspective. Central to our philosophy is a long-term approach to our business, built on a solid commitment to sustainable growth and focus on decarbonization, all of which is embodied in our mission statement: Contributing to a decarbonized world by providing essential lime and limestone solutions. To learn more about the employment experience at Graymont, click here. If you're interested in exploring our current job opportunities, please visit us at ****************************

At Kovalus Separation Solutions (KSS), we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™. How You'll Add Value… As a Process Engineer for the Food, Dairy and Beverages Markets you will be instrumental in driving our growth in the sanitary industrial markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) Remote position can be considered for the right candidate. Key Responsibilities Develop detailed process design work for commercial membrane separation processes using Spiral wound, Hollow fiber and tubular configurations and MF, UF, NF and RO technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, controls philosophies and control sequences. Participate in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities, and draft pilot reports. What you'll bring… Required Qualifications Minimum of 2 years of experience in process engineering design, with a focus on food, dairy or beverage applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. At least 1 year experience with use of spiral wound membranes in industrial applications, including food & beverage, and life science facilities. Bachelor's degree in chemical engineering, or food technology, or in another related discipline. This position is not eligible for sponsorship Preferred Qualifications 5 or more years of experience working with membrane system design and operation, with primary focus of Food, dairy or beverages filtration. Hands on experience working on the startup and troubleshooting of full-scale commercial membrane filtration systems. Desire to be an innovator and major contributor in delivering cutting edge separation solutions to our customers. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. Compensation: $75k-$92,800K All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description At Kovalus Separation Solutions (KSS), we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™. How You'll Add Value… As a Process Engineer for the Food, Dairy and Beverages Markets you will be instrumental in driving our growth in the sanitary industrial markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) Remote position can be considered for the right candidate. Key Responsibilities Develop detailed process design work for commercial membrane separation processes using Spiral wound, Hollow fiber and tubular configurations and MF, UF, NF and RO technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, controls philosophies and control sequences. Participate in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities, and draft pilot reports. What you'll bring… Required Qualifications Minimum of 2 years of experience in process engineering design, with a focus on food, dairy or beverage applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. At least 1 year experience with use of spiral wound membranes in industrial applications, including food & beverage, and life science facilities. Bachelor's degree in chemical engineering, or food technology, or in another related discipline. This position is not eligible for sponsorship Preferred Qualifications 5 or more years of experience working with membrane system design and operation, with primary focus of Food, dairy or beverages filtration. Hands on experience working on the startup and troubleshooting of full-scale commercial membrane filtration systems. Desire to be an innovator and major contributor in delivering cutting edge separation solutions to our customers. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. Compensation: $75k-$92,800K All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Data Signal Processing Engineer - Physiologic Signal Pipelines (EEG, ECG, SpO₂) We are currently pipelining for a Data Signal Processing Engineer role slated for Q2 2026. The Data Engineer is to support a federally funded Phase I program focused on at-home physiologic monitoring. This role owns the data foundation of the platform, ensuring that all downstream machine learning and analytics are built on clean, synchronized, and clinically meaningful signal data. This is a hands-on, technical role with direct responsibility for meeting NIH Rigor & Reproducibility standards and enabling reliable model development. Contractual Engagement: 450 hours (approx. 2.5-3 months) in the United States (Remote) Why This Opportunity Is Different Tech ownership - Own preprocessing, synchronization, and feature engineering for all physiologic signals Clinically grounded data work - Signals and features aligned with AASM and clinical definitions NIH-backed impact - Your work underpins verification, validation, and reproducibility for a Phase I grant Signal-rich challenges - EEG, ECG, SpO₂, motion data, real-world, noisy, and complex Flexibility- Balance life and work with flexible remote working opportunities that support how you thrive Growth - Potential to extend or convert into longer-term engagement as the program advances What You'll Do Design, build, and maintain robust data pipelines for EEG, ECG, SpO₂, and motion signals Implement signal-processing workflows including: Filtering and denoising, Artifact detection and rejection, Segmentation and time synchronization Develop derived physiologic features aligned with clinical and AASM standards Create and maintain reproducible, version-controlled datasets with clear labeling, metadata, and transformation lineage Partner closely with Machine Learning Scientists to optimize training data quality and model inputs Support technical verification (Aim 1) and data integrity for real-world field data collection (Aim 3) What You Bring Prefer BS or MS in Biomedical Engineering, Signal Processing, Data Engineering, or a related discipline Strong hands-on experience with neurophysiologic and biosensor data (EEG, ECG, PPG/SpO₂, IMU) Proficient in Python scientific computing tools such as NumPy, SciPy, MNE, and similar processing frameworks Comfort working with noisy, real-world clinical or wearable datasets Ability to own data pipelines end-to-end in a research-driven environment Bonus: Experience working with clinical datasets or sleep-medicine signals About: Early-stage medical device company developing a patented, skin-worn wearable that enables sleep-lab-level physiologic monitoring, with a focus on identifying undiagnosed sleep apnea before surgery. Addressing a major perioperative safety gap where a large percentage of patients undergo anesthesia with undetected sleep-related risk. Building tech that directly improves clinical decision making and patient outcomes. Small team, highly technical, mission-driven, working with wearable devices, physiologic signal processing, ML, and clinical research through federally funded programs. By applying for this job, you agree that we can text you (Standard Rates Apply).

Xanadu's mission is to build quantum computers that are useful and available to people everywhere. At Xanadu, we are learners, innovators, researchers, collaborators and problem solvers. We are creating something that has never been built before. What we are doing is extremely hard, the classic moon shot. Few people in their life will be able to be a part of something like this, where if we are successful, the technologies we develop will solve some of the world's most challenging problems, and literally change the world. And that is something to be excited about! Your role and responsibilities: As an industry leader in photonic quantum computing, Xanadu takes hardware very seriously! In this role, you will work within the Fabrication Process Engineering team to deliver Xanadu's photonic quantum computing hardware. With your deep technical expertise and experience developing fabrication processes for integrated photonic devices based on electro-optic materials, you will be responsible for developing and optimizing fabrication processes used to build critical components of Xanadu's quantum computing hardware. Responsibilities include: * Contribute to the development and optimization of process modules used to build integrated photonic devices from crystalline electro-optic materials, such as thin film lithium niobate * Independently own and direct wafer lots processed at Xanadu's foundry partners * Design and execute fabrication process improvement experiments, including defining fabrication splits, gathering and analyzing inline data, etc. * Define and execute metrology and failure analysis plans to identify and mitigate failure modes and assess results of process optimization experiments * Collaborate with internal and external photonics process engineers, process integration engineers and photonics design engineers, including at Xanadu's foundry partners * Challenge the state-of-the-art in key performance metrics associated with integrated photonics fabrication * Stay abreast of new developments in the field of photonics fabrication process development and rapidly implement new learnings and discoveries * Availability for travel required, expected ≤ 20% travel time Basic qualifications and experience: * PhD in physics, materials science, electrical engineering or related field * Experience with integrated photonics and/or semiconductor fabrication process development, including experience with common process modules and optimization pathways * Experience etching waveguides from lithium niobate or similar crystalline electro-optic materials * Familiarity with standard semiconductor and photonics metrology and failure analysis techniques, including at least two of: SEM, TEM, AFM, ellipsometry, XRR/XRD, SIMS, Raman spectroscopy, photoluminescence * Experience with data analysis and related software, such as Python, JMP, MATLAB, etc. * Basic familiarity with passive and active photonic components, such as waveguides, modulators, switches, beamsplitters, resonators, MZIs, etc. * Strong critical thinking skills * Demonstrated ability to tackle challenging problems and develop innovative solutions * Excellent communication skills and strong sense of teamwork Preferred qualifications and experience: * ≥ 5 years of experience with integrated photonics fabrication and fabrication process development using electro-optic materials, such as thin film lithium niobate * Demonstrated track record of achieving low loss in integrated photonic components through fabrication process development * Experience working in a foundry environment for semiconductor and/or integrated photonics products * Experience with full product development cycle, from R&D through volume ramping * Experience in photonic quantum computing hardware development * Experience coordinating with and managing external partners, including major semiconductor and photonics foundries * Experience working in fabless companies * Proficiency in Mandarin This is a new position at Xanadu.

MINIMUM QUALIFICATIONS (Required) Bachelors degree in Engineering or a Technical degree and 4 years of engineering experience or 8 years of engineering experience. KNOWLEDGE, SKILLS AND ABILITIES Highly motivated and technically competent, innovative problem-solver that incorporates the plan, do, check, action methods. Excellent self-management and project management skills (ability to manage numerous projects simultaneously). Ability to work in a team environment. Ability to collect, analyze and effectively use data to drive decision making. Strong analytical, problem-solving, time management and organization skills. Proficient in Microsoft Office Applications. Excellent oral and written communication skills. Ability to negotiate, prioritize, and multitask. Willingness to travel domestically and internationally (TAC group companies, DMTN, DNJP, etc.) Willingness to work overtime when necessary. DUTIES AND RESPONSIBILITIES Expectations of the job and the tasks to be performed (Refer to KSA) Responsibilities include, but are not limited to: Daily production support for assigned areas/lines. Develop kaizen activities driven by Safety, Quality, and Productivity. Process design and equipment/machine procurement for HVAC assembly. Project management (schedule development and budget tracking). Support company and departmental G&O's (safety, quality, efficiency, cost reduction, environmental and delivery). Equipment/jig specification, justification, installation, testing, buyoff, process validation & capability. Process Documentation (Process Flow, PFMEA, Control Plan, QA-Net, etc). Lead planning and equipment/machine install events, support equipment training, line-off, and document buy-off condition incorporating ergo, safety and spare parts. Provide regular updates to management on key projects. Understand machine operation and make suggestions to improve machine operation ratios, net operator time and product flow. Communication between support departments for open items. (Design, Quality, Production Control, Production, Business Planning, Purchasing, etc.). PREFERENCES Experience related to manufacturing and assembly processes, prefer HVAC assembly experience, but not required. Experience justifying and receiving approval of large capital expenditures. Experience leading people. A proactive person who will seek out and implement additional tasks that will add value to DMMI. Knowledge in CAD software (AutoCAD and Solidworks). Knowledge of 3D printing/additive manufacturing technologies. Knowledge of machine vision systems. Ability to read and understand GD&T. Minimum of 3 years experience in project leadership. Minimum of 3 years experience in Production/Process Engineering or related area. PFMEA & CONTROL PLAN Training, TS16949 Standards Training or Experience. Annual Salary: $79,000 -$98,000

Process Engineer Reports To: Engineering Manager Supervises: None Classification: Salaried, exempt, non-union Essential Duties & Responsibilities: The statements below are intended to describe the general nature and level of work being performed by the employee of this position. They are not intended to be an exhaustive list of all responsibilities and activities required of this position. Create and ensure that all part documentation includes drawings, process specifications, process routings, control plans, and operating instructions Ensure Engineering Change Requests (ECRs) are applicable and meet engineering specified standards Complete engineering documentation in a timely manner as determined by the department and related company goals Create new and robust processes with a focus on repeatability and efficiency Contribute to continuous improvement analyses to ensure the product being manufactured will satisfy quality requirements and meet or exceed cost objectives Originate ideas to solve engineering and manufacturing challenges from current and potential customers Assist in shop floor layouts leading to production efficiencies Determine appropriate packaging requirements and processes Design, order and maintain tooling appropriate for part processing Coordinate the efforts of operators to meet technical, safety, quality and cost objectives. Interface with Sales (and customers if required), Quality, and Scheduling during AQP and order review process. Additional duties as assigned Requirements: To perform this position successfully, the employee must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. This position involves access to technical data that is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR), which define a “U.S. person” to include a U.S. citizen, lawful permanent resident (green card holder), or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Employment is contingent upon the applicant's ability to meet these requirements or the Company's ability to obtain an export license on the applicant's behalf. Minimum of a Bachelor's degree or equivalent and at least two years of related experience and/or equivalent education & experience Previous experience in CNC Programming is preferred Previous experience creating fixture tooling/die design is required Previous experience using CAD and/or forging simulation software is highly preferred Proficient in Microsoft Excel, Word, Outlook Prior experience working with an ERP/MRP system is preferred Prior working knowledge of forged non-ferrous materials is preferred Demonstrated problem solving skills and excellent organizational and communication skills Ability to multi-task Position is required to be on-site, occasional work from home with supervisor approval is available Supports and demonstrates the Company's core values Working Conditions: This position is designed to work full-time. Days and hours of work are typically Monday through Friday, 8:00 a.m. to 5:00 p.m. An alternate schedule may be arranged or assigned based on the business demands, nature of duties performed, and other factors. Occasional flexibility to work evenings or weekends may be required as job responsibilities demand. Regular work, after hours and/or weekend work may be performed remotely, if the capability exists. Little to no travel is expected for this position. This position mainly operates in an office environment during work hours, but may be expanded to assist and support employees in other departments within the Company; Occasional exposure to production equipment and machinery. The employee will manage multiple priorities daily and may be interrupted frequently to meet the needs and requests of employees. The environment may be busy and noisy. All required personal protective equipment is provided. Physical Demands: While performing the duties of this job, the employee will spend most of his/her time sitting using computers and standard office equipment such as phones, photocopiers and fax machines. Occasional moving and/or lifting of 10 pounds, stooping, bending and reaching with hands and arms. While performing these job duties, the employee is regularly required to see, talk, and hear. Weldaloy Products Company provides Equal Employment Opportunity (EEO) to all applicants without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, veteran status, height, weight or arrest record in accordance with applicable federal, state and local laws.

Performance Consulting is a dedicated internal consulting group that is highly visible and a critical component of our transformation. The team partners with senior business and functional leaders to re-engineer core components of our business, from diagnostic work and designing innovative, streamlined ways of working, to piloting solutions for further scaled execution. We are the driving force behind transformative business initiatives that propel the entire organization towards unparalleled operational excellence. Our mission is to redefine industry standards by optimizing end-to-end processes, elevating the customer experience, and fostering a vibrant culture of continuous improvement. By enhancing employee engagement, mitigating risks, and delivering substantial financial benefits, we are committed to shaping a future where innovation and empowering excellence are at the heart of everything we do. As a Process Improvement Associate II at JPMorgan Chase, you will be at the forefront of our business transformation journey, playing a crucial role in reshaping organizational strategy and operating models. You will leverage your expertise in business and digital transformation, robotic process automation (RPA), and artificial intelligence tools to promote innovative solutions that redefine our operations. Collaborating with senior leaders, you will map, simplify, and document processes, to reduce manual touchpoints and enhance operational efficiency. Your work will be pivotal in transforming our business, requiring initiative and judgment to resolve short-term challenges and propose strategic improvements. You will analyze data, craft compelling narratives to communicate complex ideas, and build diverse teams to achieve common goals. Your ability to innovate, adapt to change, and manage tasks effectively will be essential in promoting service-delivery improvement and achieving our departmental objectives, ultimately propelling the firm toward a state of operational excellence. Job responsibilities Partner with project team members to interview stakeholders, develop frameworks and insights to address key process improvements, organizational changes, and functional strategic development efforts. Lead one or more work streams while demonstrating leadership through influence and enhancing team / organization culture. Present to senior executives and key stakeholders, emphasizing actionable insights rather than just analyses; respond to questions clearly while fostering trusted advisor relationships with key client stakeholders. Develop team members by serving as a mentor and inspiring a culture of continuous learning. Analyze and map key business processes, identifying inefficiencies and areas for improvement using advanced data analytics and statistical inference techniques. Develop and implement process improvement initiatives, focusing on simplification, manual touch point reduction, and the application of digital process tools. Collaborate with cross-functional teams to ensure alignment of process improvement initiatives with organizational goals, fostering a culture of innovation and continuous learning. Collaborate with LOBs and IT teams to evaluate existing technology ecosystems to identify/optimize platforms and tools that align with business objectives and drive digital transformation. Leverage AI, LLM (Large Language Models), and NLP (Natural Language Processing) tools to aid in providing actionable insights and innovative solutions to complex business challenges Utilize storytelling skills to effectively communicate complex process improvement concepts and data to diverse audiences, fostering understanding and retention of the core message. Analyze large quantities of data, apply a range of analytical tools, synthesize insights, and support the development of strategic solutions Required qualifications, capabilities, and skills 3+ years of experience in developing and implementing process improvement or re-engineering programs in a professional setting. Proven ability to apply advanced analytical and problem-solving skills to address complex operational issues along with strong client management and executive-level communication skills. Demonstrated proficiency in data analytics, with experience in interpreting models and diagrams to communicate data requirements and assets. Experience in relationship building, with a focus on supporting diverse teams with varied experiences, skills, and backgrounds. Proficiency in using digital process tools and AI systems to optimize operational efficiency and service delivery. Experienced in creating presentations, both written and verbal, tailored for senior audiences. Self-motivated and executes deliverables with speed and precision An dedicated learner with a strong commitment to skill development and a genuine curiosity for acquiring new knowledge. Ability to travel up to 10% Preferred qualifications, capabilities, and skills Utilize systems thinking to analyze complex processes and identify areas for optimization and integration Apply customer service principles to ensure process improvements align with customer needs and enhance satisfaction. Foster cross-functional collaboration to identify and implement process improvement opportunities across departments. Leverage digital proficiency to adopt and manage digital tools that support process improvement initiatives. Implement automation to streamline workflows and reduce manual effort, increasing overall productivity. Use agile methodologies to iteratively develop and refine process improvements, ensuring flexibility and responsiveness to change. Proven expertise or certification in Lean Six Sigma, Agile methodologies, Change Management, Organizational Design, or Strategic Consulting Engagements.

OPPORTUNITY For a motivated engineer with a passion for the food & beverage industry to provide design services for clients throughout North America. Join an integrated team of architects, engineers and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will execute a broad set of engineering competencies, food processing knowledge and problem-solving skills as well as provide mentorship to others in an environment that values collaboration. POSITION Reports directly to the VP/Manager of Process Engineering. Participates on design teams with an emphasis on food manufacturing and processing equipment, process equipment layout and sanitation/CIP systems. Projects range from master planning exercises to conceptual & detailed design, and finish with startup & commissioning. This position will proactively interact with the client, vendors, contractors and Hixson's architecture and engineering teams. CANDIDATE 10+ years of experience in process engineering and design in food & beverage, nutraceutical, or related industries B.S. in chemical or food engineering; P.E. a plus Proven ability to develop BFDs, PFDs and P&IDs Experience leading HAZOPs and FMEAs Proficient in design and specification of process systems and equipment Competence in AutoCAD and process simulation software Strong interpersonal skills to work effectively with clients and associates COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit ******************* COMPENSATION Commensurate with experience, plus excellent benefits package: comprehensive health insurance, life insurance, paid time off, paid parental leave, 401K match, profit sharing, end-of-year bonus plan, remote work flexibility, tuition reimbursement, on-site fitness center, free parking and more.

Acute Care TechnologyAt ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Responsible for partnering with the manufacturing, engineering and quality teams in the design, implementation and validation of new processes to manufacture high quality medical devices and associated accessories. Utilizes a variety of tools to continuously improve existing manufacturing while acting as an innovator in the areas of Lean manufacturing processes. Works with in-house personnel to develop test recommendations to ensure that product requirements meet customer expectations and are testable. Works to standardize manufacturing processes and put appropriate controls in place to monitor status. Interacts with product development engineers and is responsible for leading product transfer involving process capability and operator training. Essential Functions Optimize manufacturing processes to provide sustainable gains in gross margin and product performance through capital projects, statistical analysis, designed experiments, procedural changes, simulation and modeling Provide on-going technical support to production line for equipment, process, or design related issues Monitor process and equipment performance; identify and implement process improvement activities to increase/optimize yield, efficiency or throughput Maintain safety, product quality, and manufacturing effectiveness by examining equipment, processes, operations, product components and assembly to determine time or quality revisions and suggests/implements improvements Works with suppliers and participates in multi-functional teams to resolve technical/quality issues and develop new products Participate in new product design and development reviews; suggest ways to enhance DFM; develop process FMEAs; lead transfer of products from design to production; supports product scale-up activities Drive a Lean culture of continuous improvement; lead and participate in Kaizen events; promote 5s activity to standardize work; work with manufacturing manager to establish task time to maximize throughput, reduce cycle time, identify constraints and balance work content; create and update value stream maps Specify, evaluate, select, and implement new equipment and fixtures; develop and execute installation, operation, and performance qualification protocols Design and implement validation protocols for process improvements and material changes including comprehensive engineering reports providing analysis of results Develop efficient, effective systems for capturing critical process metrics for all manufacturing operations; implement automated data collection where possible Required/Preferred Education and Experience BS in industrial engineering required or Other technical degree with equivalent experience required Minimum of 2-4-years' experience in a commercial manufacturing environment driving continuous improvement with demonstrated experience in use of rotary/converting equipment and automation of manufacturing processes. required and Medical device manufacturing experience with exposure to FDA requirements required and Production of electromechanical assemblies required Knowledge, Skills and Abilities Experienced in designing and performing process validations Works well in dynamic, cross-functional team environment Strong analytical skills and common sense with emphasis on a scientific method of problem solving Able to model and simulate manufacturing flows Able to accept and produce timely results on multiple concurrent projects of significant complexity Able to write clear, concise and visual work instructions Possess effective verbal and written communication and interpersonal skills to interact with associates at all levels of the organization Knowledge of design controls, FDA and MDD requirements; able to work within a medical device quality management system Strong project management skills sufficient to take a proposed solution from resource appropriation through project scheduling and execution as well as being able to work as part of a decision-making team to bring about positive change Has a fundamental drive for continuous process improvement. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The annual salary for this position is: $78,000.00 to $96,650.00 This position is eligible for an annual bonus in accordance with the company's bonus plan. Factors which may affect starting salary include geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Radar Signal Processing Engineer We are currently seeking a Radar Signal Processing Engineer for our Dayton, Ohio location. This position requires an applicant be well versed in radar signal processing with strong computer programming skills. Position is ONSITE HOW WILL THIS POSITION CONTRIBUTE? Mission: Develop, model, simulate and analyze advanced radar capabilities and demonstrate these capabilities on fieldable systems How: By using industry best practices and contributing to a team working to expand the state of the art in modern radar technologies WHAT SKILLS ARE NEEDED? Required: Expertise with a history of demonstrated proficiency in the following technical areas: Algorithm development and analysis Common radar modes and data processing techniques Programming in Matlab and/or C++ Modelling and simulation of radar or other radio frequency systems Statistical and probability analysis Highly developed writing and verbal skills for the purpose of generating high quality technical reports and presentations. Familiarity with the software development environment, including compilers, source control, coding standards, and code reviews. Minimum of five years' experience Applicants must be US citizens capable of obtaining and maintaining a US DoD security clearance. Desired: Familiarity with RF electronic protection and electronic attack techniques Ten years or more experience Familiarity with Linux or other Unix based operating systems An active security clearance WHO IS MATRIX RESEARCH? Matrix Research is an employee-owned, small business advancing the state of the art in radar systems, radio frequency, and sensor exploitation technologies. Two thirds of our staff hold advanced degrees in Engineering, Mathematics, or the Physical Sciences. Our programs span basic research through the demonstration, test and evaluation, and low-rate production of advanced sensing systems, subsystems, and components. WHY WORK WITH US? We work with a purpose: To make the world safer through the development and delivery of innovative engineering solutions. We work as a team: We are a collaborative company comprised of highly-educated industry leaders in radar systems, image and signal processing, machine learning, hardware development, and software engineering. We support our employees with industry-leading benefits: As an employee-owned company, we embrace quality benefits, including a 20% no-match-required retirement plan, starting accrual rate of 4 weeks of vacation annually, substantially-subsidized health and dental insurance, discretionary annual bonuses, and many more. We support our employees with work/life flexibility: We offer a hybrid remote work environment for most positions and hourly pay for all positions - ensuring individuals are fairly compensated for hours worked while supporting a flexible work commitment. We transform ideas into reality: Our programs range from groundbreaking research to field deployment of advanced systems developed inhouse. Matrix Research is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, marital status, veteran's status, disability, sexual orientation, gender identity, national origin or any other protected class set forth by federal or state law. Matrix is a Drug-Free Workplace This job description is designed to provide general guidance in job tasks and is not meant to be all-inclusive of the responsibilities, duties, and skills required of this position. As business demands and needs change, the essential functions of this position may be updated to reflect the needs of Matrix Research, Inc. Job Posted by ApplicantPro

Job Title: Manufacturing Engineer Reports To: Manufacturing Project Engineer Department: Manufacturing Compensation: Salary Travel Required: Yes - 15% The Manufacturing Engineer will drive improvements to the manufacturing methods, equipment, and facilities. Duties and responsibilities: Manage individual projects from start to finish including capital investment Serve as a liaison to Engineering as a representative of manufacturing Research new materials and processes with the goal of improving efficiencies and cost Provide technical guidance, training and various support to the manufacturing & maintenance teams Document technical detail, layouts, electrical and mechanical diagrams of plant and equipment Support new equipment selection, utility capability and requirements Develop and implement process monitoring methods with the intent to improve cycle times Design and fabricate tooling, fixtures, and modifications for new or existing processes Any other duties assigned by the Manufacturing Project Engineer Needed experience & technical knowledge: Preferred Bachelor's degree in engineering or technology, Mechanical or Industrial with 2-5 years of experience Hands on experience working with electrical/ mechanical systems, fabrication, multicraft in industrial environment Effective use of PC's, software, CNC, PLC driven equipment Basic use of SolidWorks Comfortable dealing with ambiguity Experience in the use of lean manufacturing principles Exposure to industrial sewing equipment/methods Required Bachelor's degree in technical field 2-5 years working experience in manufacturing Strong interpersonal skills, can interact with non-native English speaking and/or limited English-speaking workforce Knowledge of manufacturing documentation such as wiring diagrams, schematics, and bills of materials. Proven experience in reducing cycle-times Ability to learn technical content and adapt quickly, can deal with ambiguity and shifting priorities Proven experience in project management, time management and meeting deadlines Excellent written and oral skills Good leadership and organization skills and the ability to motivate team members Physical Demands The physical demands described here and above are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions of the position. Must be able to move boxes up to 10lbs Constantly operates a computer and other office equipment Must be able to use power and hand tools Must be able to remain stationary up to 75% of the time Must be able to communicate information and ideas so other will understand Has the ability to observe details at a close range Work Environment The work environment characteristics described here and above are representative of those that an employee encounters while performing the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions of the position. Disclaimer The preceding has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time

This role will be responsible for maintaining and improving production across various products and equipment at our West Union manufacturing facility. Why Work for CaptiveAire? Nation's leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. What I truly admire about CaptiveAire is the company's unwavering commitment to innovation and continuous improvement… Equally impressive is the culture of open communication that exists throughout the organization. From my own experience, upper management never takes the stance that a task is “not their job.” Instead, there's a shared understanding that every role is essential to the company's success. This mindset, combined with the transparent communication across departments and facilities, creates a collaborative environment that truly sets CaptiveAire apart. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: No two days are ever the same in this role. Tasks can include: Training operators in proper process, tool usage, and tool maintenance. Collaborating with other engineering teams on process efficiency, quality, and safety improvement projects. Developing new designs using 3D modeling software like Solidworks for carts or production tools. Then work with the fab shops to complete the fabrication of them in a timely manner. Work closely with contractors to coordinate utility needs such as air and electrical drops, and oversee the installation of new equipment. Coordinate daily, weekly, and monthly preventative maintenance tasks on machinery. Troubleshoot machines whenever the team needs extra support. Provide hands-on support to production lines as needed. Complete hands-on testing for new process changes From a Plant Process Engineer: I enjoy the constant problem solving and the drive toward innovation that keeps things exciting. I have had jobs in the past where the day could not end soon enough because I was ready to be done. This is not one of them. I find the job rewarding and find myself here past scheduled hours often not because I have to but because I want to. Primary Job Responsibilities: 95% of the workday will be on the manufacturing floor working on projects, operating and repair of equipment Involvement with equipment operators to ensure parts are programmed, training and any process related issues Responsible for working with Safety, Quality, and Industrial engineering teams on parts, assembly, and process improvements Implementation of Engineer Change Notices (ECN) and Process Change Instructions (PCI) Support production as needed, capable of building all products to the expected quality standards in the designated area of focus on an as needed basis Assist production staff with product related questions Work with Plant manager on various facility improvement projects Job Requirements: 0-10 yrs experience 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Must be strong in mechanical and electrical engineering. Internship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for 8 - 10 hours at a time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$85k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position. Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire's Drug-Free Workplace policy. #P1

By joining our Cirba Solutions team you will: Be part of a mission-driven organization shaping the future of battery recycling and sustainability. Lead impactful projects with visible results and career growth opportunities. Collaborate with industry experts in a culture of innovation, safety, and continuous improvement. Are you looking to relocate to Ohio? Relocation assistance may be available! General Description Cirba Solutions is the most trusted and complete battery solution partner in the world. For over 30 years, we have led the BATTERY RECYCLING industry through our services, processing, and material upgrading. Contributing to the CIRCULAR ECONOMY model is our core focus. We are seeking a highly detail-oriented and responsible Process Engineer to lead the execution of small capital projects and drive continual improvement initiatives at a manufacturing site. This role is pivotal in advancing operational excellence, optimizing processes, and delivering measurable improvements in safety, quality, and efficiency. The successful candidate will leverage deep technical expertise, data-driven insights, and collaborative leadership to solve complex challenges and influence cross-functional teams. Duties and Responsibilities Lead the design, optimization, and implementation of recovery processes for nickel, cobalt, lithium, and other materials from Li-Ion batteries Develop and execute small capital projects from concept through commissioning, ensuring alignment with site objectives and best practices Champion continuous improvement initiatives, utilizing LEAN, Six Sigma, and other methodologies to enhance process reliability, safety, and performance Provide technical leadership in troubleshooting, root cause analysis, and resolution of process issues Collaborate with Operations, Maintenance, Commercial, and HSE teams to ensure seamless integration of new technologies and products, and compliance with regulatory standards Support Health, Safety, and Environmental (HSE) programs, including Process Safety Management (PSM) and EPA Risk Management Plan (RMP) requirements Facilitate Management of Change (MOC), incident investigations, and corrective action implementation Assist in the development of standard operating procedures (SOP), commissioning protocols, and maintenance plans for new equipment Create and monitor operational KPI dashboards to identify and drive improvement opportunities Mentor and develop junior engineers and cross-functional team members Represent the site in customer-facing discussions regarding technical requirements and new product introductions All other duties as assigned Qualifications Minimum 5 years of engineering experience Minimum 3 years of hands-on experience in a manufacturing environment, leading projects and improvement initiatives Demonstrated success in leading cross-functional teams and delivering results in a fast-paced environment Experience in working with Li-Ion battery processes is highly desirable Exceptional written and verbal communication skills Strong analytical, problem-solving, and project management abilities High level of accountability, resourcefulness, personal drive, and resiliency EDUCATION AND TRAINING REQUIREMENTS Bachelor's Degree in Mechanical, Metallurgical, or Electrical Engineering LEAN / Six Sigma certification preferred but not required TRAVEL REQUIREMENTS

By joining our Cirba Solutions team you will: Be part of a mission-driven organization shaping the future of battery recycling and sustainability. Lead impactful projects with visible results and career growth opportunities. Collaborate with industry experts in a culture of innovation, safety, and continuous improvement. Are you looking to relocate to Ohio? Relocation assistance may be available! General Description Cirba Solutions is the most trusted and complete battery solution partner in the world. For over 30 years, we have led the BATTERY RECYCLING industry through our services, processing, and material upgrading. Contributing to the CIRCULAR ECONOMY model is our core focus. We are seeking a highly detail-oriented and responsible Process Engineer to lead the execution of small capital projects and drive continual improvement initiatives at a manufacturing site. This role is pivotal in advancing operational excellence, optimizing processes, and delivering measurable improvements in safety, quality, and efficiency. The successful candidate will leverage deep technical expertise, data-driven insights, and collaborative leadership to solve complex challenges and influence cross-functional teams. Duties and Responsibilities Lead the design, optimization, and implementation of recovery processes for nickel, cobalt, lithium, and other materials from Li-Ion batteries Develop and execute small capital projects from concept through commissioning, ensuring alignment with site objectives and best practices Champion continuous improvement initiatives, utilizing LEAN, Six Sigma, and other methodologies to enhance process reliability, safety, and performance Provide technical leadership in troubleshooting, root cause analysis, and resolution of process issues Collaborate with Operations, Maintenance, Commercial, and HSE teams to ensure seamless integration of new technologies and products, and compliance with regulatory standards Support Health, Safety, and Environmental (HSE) programs, including Process Safety Management (PSM) and EPA Risk Management Plan (RMP) requirements Facilitate Management of Change (MOC), incident investigations, and corrective action implementation Assist in the development of standard operating procedures (SOP), commissioning protocols, and maintenance plans for new equipment Create and monitor operational KPI dashboards to identify and drive improvement opportunities Mentor and develop junior engineers and cross-functional team members Represent the site in customer-facing discussions regarding technical requirements and new product introductions All other duties as assigned Qualifications Minimum 5 years of engineering experience Minimum 3 years of hands-on experience in a manufacturing environment, leading projects and improvement initiatives Demonstrated success in leading cross-functional teams and delivering results in a fast-paced environment Experience in working with Li-Ion battery processes is highly desirable Exceptional written and verbal communication skills Strong analytical, problem-solving, and project management abilities High level of accountability, resourcefulness, personal drive, and resiliency EDUCATION AND TRAINING REQUIREMENTS Bachelor's Degree in Mechanical, Metallurgical, or Electrical Engineering LEAN / Six Sigma certification preferred but not required TRAVEL REQUIREMENTS