Chemical mixer entry level jobs - 39 jobs

- A Day in the Life The Mixer Operator assembles ingredients, portions, weighs, and formulates according to customer specifications. This position operates a computer-controlled mixing system producing dough products. Daily tasks include recording of ingredient lot numbers, weighing and combining product ingredients using a scale, physically putting ingredients into a 1,000-pound-capacity mixer, recording mix times, dough temperatures, moisture percentages and other data on paperwork, programming mixer settings using a function-key-style computer terminal, washing/rinsing/sanitizing equipment, mixing water and dry yeast to produce yeast slurry used in dough production, shoveling ice into large bins for use in dough mixing. Job duties and responsibilities * Control the flow of allergens in the Sheeter room. * Control accurate formulations, document lot numbers, raw dough temperatures, and dough moisture percentages. * Make ice formula adjustments as necessary, communicating to the bakery lead if a product is not meeting its specification. * Understands the Personal Protective Equipment (PPE) requirements. * Takes a macro approach to the overall operation of the dough room. * Controls amount of scrap in batches and lines * Is the first line of defense for people entering the bakery without proper PPE or washing hands improperly. * Maintains a clean work area by using brooms, mops, and dustpans. * Performs other duties as assigned. Quality and Food Safety requirements * Comply with all USDA, FDA, ODA regulations * Understand and perform all Standard Operating Procedures (SOPs), Good Manufacturing Practices (GMPs), and Sanitation Standard Operating Procedures (SSOPs) * Report all Food Safety concerns immediately to your Team Leader * Be aware of all safety guidelines (including by not limited to: LO/TO, HazCom Chemical Handling, Confined Spaces, PPE), and maintain a safe working environment. * Report to the Team Leader and or Supervisor any issues or suggestions to improve quality performance or the working environment. Minimum requirements Education * Basic Math and Reading Skills necessary. Work Experience * Food manufacturing experience is a plus. * Experience working in a fast-paced team atmosphere is preferred. * Internal candidates should be considered expert level by the Bakery Lead at the mixer position, indicating ability to operate and troubleshoot the position for an entire shift with consistent success. * External candidates should have equivalent expertise and experience on similar or identical equipment. Physical Requirements * Able to stand and walk on concrete for up to 12 hours. * Able to lift 50 pounds repeatedly (typically 150 times) throughout the workday. * Body agility is emphasized, including ascending or descending stairs, using feet and legs and/or hands and arms. * Hazard including proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, and exposure to chemicals. * Able to perform repetitive tasks for up to 12 hours with constant hand and wrist movement. Donatos is just as dedicated to our Associates as we are to our guests. After all, delivering the best food and service starts with attracting (and keeping) the very best team members. Whether you're looking for your first job or want to advance your career, you'll love being part of a work environment that's not just rewarding and fun, but supportive too. We're committed to hiring associates who we feel will be a great fit with the Donatos family - and then empowering them to become leaders who bring out the full potential of everyone around them.

- A Day in the Life The Mixer Operator assembles ingredients, portions, weighs, and formulates according to customer specifications. This position operates a computer-controlled mixing system producing dough products. Daily tasks include recording of ingredient lot numbers, weighing and combining product ingredients using a scale, physically putting ingredients into a 1,000-pound-capacity mixer, recording mix times, dough temperatures, moisture percentages and other data on paperwork, programming mixer settings using a function-key-style computer terminal, washing/rinsing/sanitizing equipment, mixing water and dry yeast to produce yeast slurry used in dough production, shoveling ice into large bins for use in dough mixing. Job duties and responsibilities Control the flow of allergens in the Sheeter room. Control accurate formulations, document lot numbers, raw dough temperatures, and dough moisture percentages. Make ice formula adjustments as necessary, communicating to the bakery lead if a product is not meeting its specification. Understands the Personal Protective Equipment (PPE) requirements. Takes a macro approach to the overall operation of the dough room. Controls amount of scrap in batches and lines Is the first line of defense for people entering the bakery without proper PPE or washing hands improperly. Maintains a clean work area by using brooms, mops, and dustpans. Performs other duties as assigned. Quality and Food Safety requirements Comply with all USDA, FDA, ODA regulations Understand and perform all Standard Operating Procedures (SOPs), Good Manufacturing Practices (GMPs), and Sanitation Standard Operating Procedures (SSOPs) Report all Food Safety concerns immediately to your Team Leader Be aware of all safety guidelines (including by not limited to: LO/TO, HazCom Chemical Handling, Confined Spaces, PPE), and maintain a safe working environment. Report to the Team Leader and or Supervisor any issues or suggestions to improve quality performance or the working environment. Minimum requirements Education Basic Math and Reading Skills necessary. Work Experience Food manufacturing experience is a plus. Experience working in a fast-paced team atmosphere is preferred. Internal candidates should be considered expert level by the Bakery Lead at the mixer position, indicating ability to operate and troubleshoot the position for an entire shift with consistent success. External candidates should have equivalent expertise and experience on similar or identical equipment. Physical Requirements Able to stand and walk on concrete for up to 12 hours. Able to lift 50 pounds repeatedly (typically 150 times) throughout the workday. Body agility is emphasized, including ascending or descending stairs, using feet and legs and/or hands and arms. Hazard including proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, and exposure to chemicals. Able to perform repetitive tasks for up to 12 hours with constant hand and wrist movement. Benefits Paid time off Health insurance Dental insurance Vision insurance Life insurance Disability insurance 401(k) Referral program Employee discount

Job Description Mixing Operator 1st shift - 7:00am - 5:00pm The Mixer Operator role is focused on the mixing of 300 gal. batches of various formulations. Responsibilities: Operates an industrial mixer, vacuum pump, dust collector, scales, and tank press to convert raw materials into finished sealants and adhesives. Read and follow a batch sheet Locate, weigh, and add the proper raw materials to mixing vessels Clean the mixer, all parts, and mixing cans according to training procedures. Properly label the containers, record what has been produced on a daily production sheet. Collect lab samples of each batch for QC purposes. Requirements: Requires ability to read, write, and perform basic math calculations (addition, subtraction, multiplication, division) Ability to comprehend and follow verbal and written instructions, such as SOP's, Batch Records, policies, procedures, etc. Please Note: As part of our typical recruiting process, from time to time, we may contact you regarding positions that we feel are a good fit for you via SMS text message. Message and data rates may apply, depending on your mobile phone service plan. At any time, you can opt-out completely by replying STOP. By applying to this position, you are giving consent to this.

Job Description Ready to Turn Chemistry into Craft? Western Enterprises-part of the Marmon family-has been engineering trusted compressed gas solutions for over six decades. Our Ohio-designed and -built products, from fittings to manifold systems, reach customers around the world. If you thrive on precision and teamwork, Avon Lake is where your skills shine. What Will You Do? Ask yourself: Do you enjoy hands-on work with measurable results? Are you comfortable working around acids and plating chemicals while wearing PPE at all times? Can you follow detailed methods and keep meticulous records? If so, here's how you'll contribute: Execute cleaning and plating operations that protect and enhance metal parts. Handle and mix chemicals safely with proper PPE 100% of the time. Follow step-by-step procedures and document per methods (e.g., WEPM6001, WEPM8006). Run titrations; maintain correct bath chemistry and temperatures; monitor tank health. Load parts into baskets/racks; move them through chemical and rinse solutions. Dry and inspect parts; identify nonconformances and perform rework. Carry out preventative maintenance and clean tanks as needed. Collaborate with teammates to meet quality and efficiency targets. Report chemical reorder points and urgent issues to your supervisor promptly. Keep your area clean and organized; arrive on time and ready for every shift. What Do You Need? Experience in plating, chemical processing, or related manufacturing. Knowledge of safe chemical handling practices. Commitment to accuracy, quality, and detailed documentation. Physical ability to lift, push, and carry materials. A team-oriented approach and comfort with a fast-paced environment. Join Western Enterprises in Avon Lake and shape high-performance products from the ground up-where precision meets purpose.

At INEOS Pigments, we value the contribution of our people in making us one of the largest producers of titanium dioxide in North America. Providing numerous products and services to industries around the globe, from coatings to plastics to paper and other end-uses, we invest in employee development and offer a wide range of career opportunities, offering everyone the chance to broaden their experience and build a professionally rewarding career. As a Chemical Process Operator, you will work a rotating shift in our chemical manufacturing plant and will perform operating activities as part of the manufacturing team to ensure the safe and efficient production and packing of titanium dioxide pigment and associated products. The Chemical Operator is responsible for safe and proper operation of equipment in his/her area in accordance with the standard operating instructions, company policies and shift supervisor's instructions. This is a safety critical role. Key activities include: Adherence to all SHE policies and procedures and INEOS Pigments' 20 principles of process and Behavioral Safety and Life Saving Rules Makes appropriate adjustments to meet safety, quality, and environmental requirements. Tends equipment or semi-automatic systems that processes chemical substances into industrial intermediate and finished products. Reports and/or resolves conditions affecting safety, efficiency or product quality with peers, technical or supervisory personnel. Troubleshoots equipment problems and process upsets. Monitors in-process quality results for slurry production and packaging quality for dry production. Monitors maintenance activity in the area, including signing of work permits. Perform Job Tasks as outlined in SOPs. Perform quality-related jobs as indicated in the Quality Procedures Documents of the Unit. Completes all documentation accurately Reviews, comprehends and follows all company rules, policies and guidelines Adhere to current Collective Bargaining Agreement. Other duties as assigned You will ideally have: Completed High School education Experience with shift work The highest regard for safety processes and Personal Protective Equipment requirements Demonstrated ability to work in an adaptable team environment Ability to problem solve and make decisions Ability to write legibly and read decimals Good verbal and written communication skills Good computing skills in basic Office software plus an ability to comprehend other data presented electronically Previous work in a chemical plant or similar industrial environment is a plus A Chemical Operators Certificate or a recognized trade qualification is a plus Schedule/Hours This is a 12-hour day and night rotating shift position. EOE M/F/Vet/Disabled Our Ashtabula, Ohio Complex, consisting of two plants just south of Lake Erie, is a state of the art manufacturing complex with leading technology and more than 45 years of manufacturing excellence. INEOS Pigments offers a competitive salary with an annual bonus and a comprehensive benefits package, including paid time off, medical, dental, vision, short-term disability, long-term disability with the buy-up option, basic life & AD&D insurance with a buy-up option for self and dependents, 401(k) with company match. EOE M/F/Vet/Disabled Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Summary: The primary function of the Butyl Mixing - Op II is to weigh raw materials and add them to the mixer according to the specifications of the recipe that is pre-loaded into the computer. What We Offer You! Competitive Salary Medical, Dental & Vision Plans Tuition Assistance Training and Development 401 Match w/2yr. vesting period PTO & Holidays immediately Wellness/Fitness Resources Onsite Employee Stock Purchase Plan What's attractive about the Operator II position? Growth Potential Team-Oriented Environment Dynamic Culture and People What Success Looks Like: Obtain/Maintain Forklift and Aerial Certification Follow batch card and JQTL instructions as written Properly collect, package, and clearly label raw materials, production, components, and other representative samples to be tested or retained Properly document batch records Correctly label secondary containers and finished goods Input/Scan raw materials for batching Always use proper PPE Properly operate, maintain, and calibrate all equipment according to the instrument manuals and test methods so that test data is accurate and reliable. Perform changeovers and end of run cleanouts Cross train on multiple mixers in the butyl work cell Work Independently and as a team Complete BBS Audits monthly Communicate with all co-workers, leads, manager in an effective/timely manner Maintain and uphold the work area in compliance with 6S Standards Participate in continuous learning/training events Able to troubleshoot mechanical and formulation issues Follow all Cardinal Safety Rules and policies; notify supervisor/lead of any existing or potential safety issues. What you Bring: Must be able to lift a minimum of 55 lbs. on an infrequent basis Withstand extended periods of standing, walking, bending, pulling, pushing, climbing, use of stairs and ladders Work hours established by department management including 8-12-hour shifts, holidays, and weekends as needed to meet customer demands $21.20/hr. + $1/hr. Shift premium About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

Vector's partner in Painesville, Ohio manufactures protein based ingredients and private label products. They have an open Chemical Distillation Operator position. This is an ideal position for someone who works well autonomously. Available Shifts: on Nights - 6p-6a $20/hr. to start Upon Hire-In, workers on Nights (6p-6a) will receive a shift diff of $2.00/hr. Responsibilities: Understand still chemical and physical functions, as well as supply and transfer utilities operation. Operate and adjust controllers, heat exchangers, condensers, pumps, tempered water, re-boilers and related apparatus. Record process data for verification and traceability. Monitor equipment including flow, level, pressure and temperature. Address and report leakage and spills. Clean process tanks, vacuum system, condensers and downlegs according to written methods and schedule. Report irregularities to supervisor; including faulty equipment, defective materials and unusual conditions. Maintain work records. Turn in labeled distillate and bottoms verification samples to laboratory at established intervals. Requirements: Continuously wear proper PPE. Communicate during emergency -- distinguish alarms and audible signals, execute emergency shutdown. Rotate shift or remain on-call under urgent circumstances. Cannot be afraid of heights or working in inclement weather outside.

The Certified Chemical Operator is responsible for processing and filling products using multiple different types of packaging machines and mixing vessels. The Certified Chemical Operator will organize the area, collect materials such as pails, cans, cartridges or films, and set up the filling and batch making equipment. Responsibility includes gathering required raw materials filling and replenishment of day tanks, labels, and casing materials. Production order card must be followed exactly as to correct packaging including labeling of cans and cases, etc. The Certified Chemical Operator is responsible for reporting correct counts of production for the shift and downtime information. ESSENTIAL DUTIES & RESPONSIBILITIES: Assemble and place all materials to be used in their appropriate location prior to use. Fill material into one-, five-, and 55-gallon units as per filling procedures. Follow all batching procedures or standard operating procedures. Properly use the filling and batching equipment and maintain cleanliness of the work area. Assist in the waste segregation and total quality management (TQM) recycling program. Communicate information between supervisors, managers, and engineering. Use appropriate safety equipment and follow established safety regulations. Accurately record and communicate downtime issues. Unload bulk tanker. Provide shipping and receiving support. Maintain and participate in the preventative maintenance (PM) program of the equipment. Maintain and follow all quality control procedures. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

The Certified Chemical Operator is responsible for processing and filling products using multiple different types of packaging machines and mixing vessels. The Certified Chemical Operator will organize the area, collect materials such as pails, cans, cartridges or films, and set up the filling and batch making equipment. Responsibility includes gathering required raw materials filling and replenishment of day tanks, labels, and casing materials. Production order card must be followed exactly as to correct packaging including labeling of cans and cases, etc. The Certified Chemical Operator is responsible for reporting correct counts of production for the shift and downtime information. ESSENTIAL DUTIES & RESPONSIBILITIES: Assemble and place all materials to be used in their appropriate location prior to use. Fill material into one-, five-, and 55-gallon units as per filling procedures. Follow all batching procedures or standard operating procedures. Properly use the filling and batching equipment and maintain cleanliness of the work area. Assist in the waste segregation and total quality management (TQM) recycling program. Communicate information between supervisors, managers, and engineering. Use appropriate safety equipment and follow established safety regulations. Accurately record and communicate downtime issues. Unload bulk tanker. Provide shipping and receiving support. Maintain and participate in the preventative maintenance (PM) program of the equipment. Maintain and follow all quality control procedures. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Production Operator E Job, Toledo, OH Arclin USA is looking for a Production Operator E for our Toledo, OH facility. Reporting into the Production Supervisor, this position is an entry level, full time position, and Operator is responsible for performing tasks and duties pertaining to the manufacturing and processing of resins and formaldehyde. This role is required to know and perform all assigned production department functions in compliance with HSE - Health, Safety and Environmental regulations and Arclin's policies and procedures to contribute positively to an efficient and safely run operation. Starting Wage: $27.40/hr Production Operator E Job Responsibilities: Manufactures resin and formaldehyde and/or related surfaces according to established procedures and HSE regulations. Unloads and loads raw materials and finished products following established procedures (tanker trailers, railcars, box trucks, and bulk trucks) Operates a forklift to load/unload raw materials (drums, totes, bags) Collaborates with management to meet the production and shipping schedule Ensures required shipping documents are completed and procedures are followed to be in compliance with all regulations and corporate requirements Participates in the Joint Health and Safety Committee to facilitate safety improvements Follows all site rules and procedures as they apply to quality, health, safety, and the environment Visually monitors processes within their area of accountability and immediately informs the Lead Operator of any deviations or abnormalities Works in close coordination with the Lead Operator to accomplish the tasks needed to safely and efficiently meet production and maintenance schedules across all processes Communicates and confers with the Lead Operator as well as with Technical, Supervisory, and Support Personnel to resolve process conditions affecting safety, efficiency, and product quality Responds to process alarms and interlocks promptly and coordinates timely confirmation and corrective actions to resolve conditions generating the alarms and interlocks Performs In-Process Checks (IPC's) to verify batch progression and quality using laboratory equipment (GC, Titrator, pH meter, etc.) Performs troubleshooting in the event of process deviations Production Operator E Job Requirements: High School Diploma Required or GED. Forklift experience a plus but must be able to become certified. Capable of Driving a Tractor/Tanker unit or being able to learn. Analytical and mechanical mindset needed to be successful in this role. Previous chemical/ processing experience a plus. Must be ok with rotating shifts.(Days/Nights/Evenings rotating every week) Must be ok with following strict Health and Safety Guidelines and wear required PPE ( Personal Protective Equipment). Ability to sit, stand walk and climb frequently working in elevated areas. Will lift an average of 50 lbs frequently. Basic computer skills required. DCS Distributed Control Systems experience a plus Basic math skills required including the use of a calculator. **Please note: The above statements are designed to outline the functions and position requirements of this job. It does not identify all tasks that may be expected, nor address the performance standards that must be maintained.**

Primient is a century old company with an entrepreneurial spirit. We are a leading producer of food and industrial ingredients made from plant-based, renewable sources. We deliver value through deep technical, commercial, and operational excellence that is backed by our long-standing corn wet milling heritage. Wherever we are in the process, from field to customer, our priorities are focused on ensuring we produce the safest, highest quality products through practices that uphold both our responsibility and commitments to the challenge and drive for excellence, our people and our planet. We are a privately held company with locations across the US, Mexico, Poland, and Brazil. We're investing in our plants and people to unlock our potential in the industrial and food sectors. Guided by our values of Safety, Excellence, Integrity, and Growth, we're focused on growing our business, our reputation, and the career of every teammate. About the Role Manufacturing careers that offer more: The Primient Process Operator role is not your typical factory job. There is some manual labor but you are not just standing on a line or doing simple repetitive tasks. Each shift is different, with new problems to solve and wide-ranging duties to perform as part of a team. From your first day onwards, you will be learning and mastering key skills - to start on the path to becoming a skilled technician. Process Operator - the need to know You will help to ensure the safe operation of our process through a highly automated, state-of-the-art system. We put a strong focus on safety - it is always front of mind. Your role will involve climbing stairs and ladders and working in warm and cold temperatures. Manual labor is not the main part of the job, but you do need to lift and carry up to 55 lbs at times Ability to obey all safety rules and identify and correct potential safety problems. Ability to work both in a team environment and individually as required. Proficient written and verbal communication skills Proficient computer skills, Microsoft office tools and excel. Follow SOP's and/or PM task instruction sets. Communicate with production prior to starting job and when job is completed. Ability to clearly communicate this information to team members. Strong mechanical aptitude, knowledge of basic processing equipment (pumps, control valves, tanks, heat exchangers (plate and frame / shell and tube), centrifuges, ion exchange, activated carbon beds, filtration equipment, evaporators, crystallizers, dryers, classification systems, packaging systems and process analytical devices (pressure, pH, temperature, conductivity, etc.) Perform routine work permitting as scheduled. Perform area lab analytical analysis (titrations, density measurements, process sampling as needed) Troubleshoot lab equipment as issues present themselves. Troubleshoot equipment/systems as required. Identify and implement solutions to recurring equipment problems. Communicate and complete detailed logs for shiftily items taking place. Assist I&E technicians and mechanics as needed / as asked. Must be able to identify the need for, and request engineering/vendor assistance as required. Communicate and work with other groups (process engineers, production technicians, quality control) as necessary to promote efficiency in problem solving and work scheduling. Required to clean up after jobs are completed / perform housekeeping as required in the area. Familiarize product, steam and airflows though out the area. Perform Lock out Tag out and work permitting for all work being completed in area. This is a 365/24/7 Operating Plant - requiring weekends and holidays. Shift Schedule: This job will require you to work the D-Shift Schedule. D-Shift works a rotating schedule: 2 days 6 am-2 pm, 1 day 2 pm-10 pm, 4 days 10 pm-6 am, 2 days off, 1 day 6 am-2 pm, 4 days 2 pm-10 pm, 1 day 10 pm-6 am, 2 days off, 4 days 6 am-2 pm, 2 days 2 pm-10 pm, 4 days off (Repeating every 28 days) Total RewardsStarting pay of $27.84/hr + overtime with opportunity to advance with our pay for skill system. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: Competitive Pay Multiple Healthcare plan choices Dental and vision insurance A 401(k) plan with company and matching contributions Short- and Long-Term Disability Life, AD&D, and Voluntary Insurance plans Paid holidays & vacation Floating days off Parental leave for new parents Employee resource groups Learning & development programs Fun culture where you have an opportunity in shaping our future Career Path & Culture Primient is committed to a workplace that is all in - ensuring everyone has the opportunity to develop and shape a career that matters in an open culture which embraces equity, diversity and belonging. We challenge old ways of thinking; and encourage employee voices to be a guiding force for ongoing learning. Primient supports a culture of inclusion that respects individual strengths, views, and experiences. We believe our differences make better decisions, drive excellence, and deliver better business results. Primient employees experience autonomy and accountability in their role. Here, employees control their destiny as there is opportunity for career growth and pathways outside the norm. Diversity, Equity, Inclusion & Belonging We are believers in the power of difference. We strive to represent the communities in which we operate and to provide an inclusive, welcoming environment for all. We want Primient to be a place where every employee feels they belong and knows they are seen, heard, valued and safe to speak up. Our aspiration is to unlock the full potential in diverse perspectives, while offering everyone an equal chance to grow, Primient is an equal opportunity employer, committed to the strength of an inclusive workforce. California Consumer Privacy Act ("CCPA") The Company is committed to complying with the California Consumer Privacy Act (“CCPA”) and all data privacy and laws in the jurisdictions in which it recruits and hires employees. We collect the following categories of personal information for the purpose of hiring the best qualified applicants and to comply with applicable employment laws: Name and contact information; Job preference and work availability; Social Security Number and/or other identification information; Education and qualifications; Employment history and experience; Military service; Reference and background check information, including relevant criminal history and credit history; Social media information; Pre-employment test results; Post-offer medical examination information and results, including drug test results; Voluntary self-disclosure information regarding minority, veteran, and disability status; and Information provided by you during the hiring process.

The Certified Chemical Operator is responsible for processing and filling products using multiple different types of packaging machines and mixing vessels. The Certified Chemical Operator will organize the area, collect materials such as pails, cans, cartridges or films, and set up the filling and batch making equipment. Responsibility includes gathering required raw materials filling and replenishment of day tanks, labels, and casing materials. Production order card must be followed exactly as to correct packaging including labeling of cans and cases, etc. The Certified Chemical Operator is responsible for reporting correct counts of production for the shift and downtime information. ESSENTIAL DUTIES & RESPONSIBILITIES: * Assemble and place all materials to be used in their appropriate location prior to use. * Fill material into one-, five-, and 55-gallon units as per filling procedures. * Follow all batching procedures or standard operating procedures. * Properly use the filling and batching equipment and maintain cleanliness of the work area. * Assist in the waste segregation and total quality management (TQM) recycling program. * Communicate information between supervisors, managers, and engineering. * Use appropriate safety equipment and follow established safety regulations. * Accurately record and communicate downtime issues. * Unload bulk tanker. * Provide shipping and receiving support. * Maintain and participate in the preventative maintenance (PM) program of the equipment. * Maintain and follow all quality control procedures. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

We are seeking engaged, driven individuals with an active CDL license to join our team of Mixer Operators at SRM Concrete. The primary responsibility of the Mixer Operator is to ensure the efficient and safe production of high-quality concrete products. This involves safely operating and maintaining concrete mixer trucks, loading and mixing concrete according to precise specifications, and with exceptional customer service, delivering the product to various construction sites, commercial and residential. The role demands a strong commitment to safety, a keen eye for detail, and the ability to work effectively in a team. We value Go-Getters and are committed to ensuring every team member shares in the success of SRM Concrete. Key Responsibilities: Safely operate a concrete mixer truck to transport and deliver concrete products. Load and mix concrete ingredients by following specific job orders and company protocols. Ensure timely delivery of concrete products to construction sites, maintaining courteous and professional interaction with the customers and the public. Conduct pre-and post-operation checks on the mixer truck to ensure its proper functioning and report any maintenance or repair needs. Adhere to all safety protocols and procedures to prevent accidents and ensure the safety of all team members and the public. Maintain accurate records of deliveries, vehicle maintenance, and other relevant documentation as required. Work closely with the dispatch team to ensure efficient scheduling and routing of deliveries. Assist in other duties as assigned, which may include general maintenance tasks or supporting other team members in the production process. Qualifications: Valid CDL Class A or B license. Current DOT Medical Card. Proven safe driving record. Physically able to lift/carry up to 100 lbs, climb ladders/stairs, and work in varying weather conditions. No unexplained gaps in employment history. Strong teamwork, reliability, and adaptability. Previous experience as a Mixer Operator or in a similar role is preferred, but not mandatory. Willingness to undergo SRM's pre-employment screenings. About us: SRM strives to be the largest, most profitable construction material company in the country, while maintaining a best-in-class culture. SRM's 5 Principles of Service: Safety, Quality, Kindness, Cleanliness, Go-Getter Why Join Us? As part of our team, you'll me more than a CDL holder; you'll be a valued concrete expert. Our commitment to our team includes: Growth: Opportunities for advancement in a rapidly growing company. Home Daily: Enjoy work-life balance with daily home time. Competitive Compensation: Hourly pay with eligibility for bonuses and annual raises. Exceptional Benefits: Comprehensive benefits package including low-cost medical, dental, vision, STD, LTD, and life insurance, paid holidays, PTO and vacation programs, 401k with $100 match/week, family days, and more! Overtime Opportunities: Daily overtime after 8 hours and weekly after 40 hours Candidates will be required to undergo a pre-employment drug screen, SRM's pre-employment physical, and consent to background checks, including Clearinghouse and MVR checks. We are an equal-opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Seaman Corporation is a manufacturer of high-quality industrial coated fabrics, based in Northeast Ohio for over 75 years. Our manufacturing facility promotes a collaborative and innovative atmosphere, and we celebrate our team-based approach. Manufacturing is the core of our business. We are currently looking for a Bulk Mixing Operator on 3rd Shift, 11:00p - 7:00a. As of February 1, 2026, we will transition to a 24/7 rotation with a 4:3 schedule. Must be able to work within that schedule. Day shift will be 7a-7p; night shift will be 7p-7a. This position is responsible for the efficiency of the mixing operation to ensure the proper combination of chemicals and color matching of all compounds is made available to the coating departments. Promote safety by following all safety procedures and practices Mix color pigments or pastes according to formula and make necessary adjustments until color matching is verified Deliver blended compounds in timely manner to each production line to run efficiently Document pick list information, print and attach pigment ticket to pick list What we offer: Medical/Dental/Vision, beginning the first day of employment 401k with company match, after 30 days 10 Paid Holidays Opportunities for overtime and advancement $300 sign-on bonus Annual and quarterly bonuses based on company performance Education & Experience: HS Diploma/GED required Previous manufacturing experience preferred Some computer skills preferred All candidates will be required to successfully complete the following: Work-Keys Assessments Drug Screening Criminal Background Check

Job Description JACK Thistledown Racino is looking to fill a variety of positions in our Food & Beverage and EVS department. Please submit your resume to be contacted for this exciting opportunity. We are looking to fill: Culinary Cooks Food Hall Attendants Stewards/Dishwashers EVS Attendants Security Officers Cage Cashiers Promotions Rep. We are looking to fill part-time and full-time opportunities for all these positions. Swing by to meet our hiring leaders on Tuesday, February 3rd & Thursday, February 5th from 1pm-6pm in MillCreek Grille. Look forward to seeing you!

Manual Chemical Process Operator II Clean, Temperature-Controlled Environment | Max Lift ? 30 lbs | Modern Facility The Manual Chemical Process Operator II is responsible for operating and monitoring PVD coating furnaces used to coat carbide and cermet inserts. This role is ideal for individuals with experience as a machine operator, chemical process operator, heat-treat operator, or similar hands-on manufacturing background. Training is provided for motivated candidates with strong mechanical or process aptitude. This position is performed in a modern, clean, temperature-controlled facility with strict safety and environmental controls. Key Responsibilities PVD Furnace Operation * Load and unload fixtures with product into PVD coating furnaces. * Verify product setup and ensure all components are properly prepared and clean. * Enter product weights, coating-cycle data, and required parameters into computer systems. * Start, monitor, and document coating processes. Equipment & Process Support * Clean fixtures, plates, and equipment between furnace cycles. * Monitor and maintain adequate gas supply; replace tanks as needed. * Check targets and melts to ensure sufficient material for upcoming production cycles. * Perform standard tests to validate coating thickness and adhesion. * Conduct batch cleanings at required intervals. * Operate secondary process equipment (e.g., parts blaster). Quality & Organization * Separate and organize product during setup and after processing. * Maintain a clean, safe, and well-organized work area. * Follow all operating procedures and notify supervisors of deviations. * Assist in problem-solving of furnace-related issues using learned knowledge and reasoning skills. Education & Experience * High School diploma or GED required. * Two-year technical degree preferred but not required. * Experience in machine operation, chemical processing, heat treat, or industrial furnace operation is helpful but not required - training provided. Work Environment * Clean, temperature- and humidity-controlled production area. * Dust collection systems in use throughout facility. * Safety glasses and safety shoes required. * Breathing apparatus available for rare emergency scenarios (e.g., furnace malfunction). * Hazardous gases monitored continuously for safety. * Noise levels below 85 dB (hearing protection recommended). Physical Demands * Standing for most of the shift (two breaks per 8-hour period). * Intermittent walking, reaching, bending, and light machine interaction. * Lifting limited to a maximum of 30-33 lbs (insert trays). Problem-Solving Responsibilities * Operators hold responsibility for furnace performance during their shift. * Work is conducted with autonomy while adhering to established procedures. * Must communicate deviations promptly to leadership. * Use knowledge, training, and reasoning to solve furnace- or process-related issues. Rewards & Benefits * Medical, dental, vision, and life insurance starting Day 1 * Paid Time Off (PTO) + 4 floating holidays + 7 company holidays per year * Up to 6% company 401(k) match * Parental leave, employee discounts, and additional benefits * Annual safety shoe stipend

Tulkoff Foods is a dynamic and rapidly growing private equity-backed portfolio company within the food industry. We specialize in the manufacture and distribution of specialty sauces across North America, with a commitment to delivering high-quality products and innovative solutions to our customers. As we navigate a period of expansion and strategic initiatives, we are seeking a 2nd shift Lead Blender to join our team and contribute to the company's success. The Lead Blender organizes and directs blending operations on the assigned shift. This role ensures accurate formulation and mixing of all blended products within established quality and safety guidelines. The Blender Lead assists blending staff, coordinates workflow, and maintains compliance with GMPs and company standards. Primary Responsibilities Lead blending team members to meet production schedules. Accurately pick, measure, and blend formulas using SOPs and GMPs. Operate blenders, mixers, cookers, and ancillary equipment within process guidelines. Ensure proper lot coding and prepare samples for lab testing. Monitor product quality and report any deviations or food safety concerns. Maintain accurate production records and paperwork. Coordinate with packaging and other departments for timely product flow. Enforce sanitation and safety standards in the blending area. Qualifications To be eligible for this position, candidates should meet the following requirements: Prior blending experience required, leadership experience preferred Forklift experience or certification (training available) Ability to lift up to 50 lbs. and stand for extended periods Strong communication and organizational skills Flexible schedule; may require overtime

Now Hiring: Bakery Mixer - $17/hr (Cuyahoga Falls Area) Join a team that creates delicious cookies, pastries, and specialty baked goods!Responsibilities: • Prepare and mix ingredients for cookies, pastries, and specialty items • Follow recipes and mixing instructions accurately • Safely operate industrial mixers and bakery equipment • Maintain a clean, sanitary, and organized workspace • Work closely with bakers and kitchen staff to keep production flowing smoothly Pay: • $17/hr starting Requirements: • Ability to add, subtract, multiply, and divide • Able to measure both volume (quarts, cups) and weight (pounds, ounces) • Can read and follow written instructions and recipes • Strong problem-solving skills and a team-focused attitude • Able to lift up to 60 lbs frequently • Able to communicate issues effectively with a team leader If you're reliable, detail-oriented, and love working around great food, we want to meet you!About Inova Staffing: Since 1992, Inova Staffing Services has been a trusted staffing partner throughout Northeast Ohio. We specialize in manufacturing, warehouse, distribution, clerical, and call center roles-proudly supporting our local communities. Inova Staffing is an Equal Opportunity Employer. #OMBC2Apply Today: • Apply online: www.inovastaffing.com (Select “Cuyahoga Falls” as your nearest branch) • Text 330-929-3700 for more information

Position Overview:We are seeking a reliable and experienced Mixer for a leading custom chemical blending company. This full-time role involves accurately mixing batches to create detergents, soaps, cleaning products, and more. The successful candidate will follow recipes, weigh and measure raw materials, operate mixing machines, and perform routine quality checks. The position also involves cleaning equipment after use. A strong attention to detail and the ability to work within safety protocols are essential. Key Responsibilities: Accurately mix liquid and powder products, following batch cards and recipes Weigh and measure raw materials for production Operate mixing machinery Perform routine quality checks and ensure product standards are met Clean mixing equipment after use Wear safety gear, including a full suit, gloves, goggles, and mask (steel-toe boots required) Requirements: Prior experience in mixing, measuring, and weighing ingredients Ability to lift up to 50 lbs regularly Strong attention to detail and ability to follow instructions Team player with a commitment to long-term employment Steel-toe boots required (provided safety gear) Must have large hands for effective mixing Work Schedule & Compensation: Monday to Thursday: 5:00 AM - 3:30 PM Pay: $18.00 per hour Full benefits package after 30 days on the company payroll, including: Medical, dental, and vision insurance 401(k) with 20% match Paid vacation and holidays Life insurance Short and long-term disability Why Join Us: Competitive pay and annual raises Stable, growing company with a positive, fun work environment Promotes from within with long employee tenure Excellent benefits package Opportunity for contract-to-hire with potential for full-time employment Equal Opportunity Employer: We are an equal opportunity employer committed to a diverse and inclusive workplace. We celebrate differences and are dedicated to creating an environment where everyone can thrive. #TalrooIndependence#IND001