Chemist jobs in Edison, NJ

Job Title: Analytical Scientist - Solid Oral Product Development The Analytical Development Department is dedicated to the successful and timely development of new pharmaceutical solid oral products by providing essential analytical development services to clients. The Analytical Scientist will offer analytical support for the team, contributing to the evaluation, development, and validation of analytical methods with limited supervision. The role also involves conducting routine analyses of active pharmaceutical ingredients (APIs) and finished products using advanced laboratory techniques and instrumentation. Specific Duties, Activities, and Responsibilities Perform hands-on method development, improvement, and validation using techniques including, but not limited to: HPLC, GC, Dissolution, UV-Vis Spectroscopy, FTIR, Microscopy, and Particle Size Distribution (PSD). Assist in complex analytical experiments such as unknown impurity identification and excipient compatibility studies. Effectively prioritize activities to provide timely analytical support to product development initiatives. Anticipate analytical challenges in the R&D development process and provide strategic long-term planning for method development and enhancement. Support formulation development and technology transfer activities for assigned projects. Investigate method performance and reliability, and conduct optimization studies as necessary. Collaborate in the preparation of technical documents, including validation protocols and reports, stability protocols and reports, and analytical test procedures. Education and Experience Bachelor's degree (BS) in Chemistry, Biochemistry, or a related discipline with 6-8 years of pharmaceutical industry experience, or Master's degree (MS) in Chemistry, Biochemistry, or a related discipline with 4+ years of pharmaceutical industry experience. Knowledge/Skills Solid working knowledge of GxP principles, regulatory (ICH) guidelines, and compendial (USP/EP/JP) requirements for generic product development.

The Associate Scientist MSAT Advanced Therapies Validation is responsible for validating supporting processes, implementing improvements within commercial manufacturing, and managing the lifecycle of these processes. The Associate Scientist acts as a Subject Matter Expert for validation studies, particularly in optimizing commercial manufacturing of lentiviral vectors, and liaises with various stakeholder departments. Responsibilities: Contribute to Life Cycle Management (LCM) and New Technology Introduction for the site. Execute validation of supporting processes (e.g.,mixing, sterilization, thermal processing, bio-decontamination). Support the introduction of new technologies and digitalization projects through validation protocol execution. Support the introduction of new materials via execution of validation protocols. Validate process parameters (e.g., process hold times). Contribute to Life Cycle Management projects. Act as Subject Matter Expert for one or more validation categories. Leverage the global MSAT network to identify and implement best practices. Author and review well-documented protocols and reports for all processes to be qualified/validated, in accordance with corporate/site guidelines, procedures, regulatory requirements, and industry best practices. Coordinate and support the execution of validation studies that conform to site standards and client guidelines, while meeting quality requirements. Support the site change control program by performing validation impact assessments and delivering the resulting implementation plan. Investigate deviations associated with process validation activities and oversee pre-validation and validation activities resulting from technical changes. Propose and formalize enhancements to qualification and validation processes and procedures to support process validation throughout the lifecycle and ensure program sustainability. Assist with writing Quality Risk Assessments for existing and new or changed processes. Ensure integration of global standards into local production processes. Support complex investigations and risk assessments. Act as SME during internal and external audits and inspections. Experience: Minimum of 2 years of relevant Manufacturing, Science, & Technology experience in the pharmaceutical industry. Experience with cell therapy manufacturing or viral vector manufacturing. GMP manufacturing and/or validation experience in pharmaceuticals. Skills in communication, planning, documentation, risk management, root cause problem-solving, and knowledge management. Understanding of regulatory requirements and industry guidelines for validation (e.g., FDA, EMA, ICH, ASTM, ISO, ISPE, PDA, etc.). Affinity with process technology and digitalization in manufacturing. Capable of successful delivery of local small projects, regional project work streams, or departmental programs under supervision. Selects applicable engineering/scientific tactics. Works independently within scope, requiring general guidance. Skills: Stem Cell Therapy Good Manufacturing Practices (GMP) Drug Manufacturing Education: BSc in Biochemistry, Biotechnology, Chemical Engineering, or a related field. Advanced degree (MSc/PhD) in Biochemistry, Biotechnology, Chemical Engineering. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Recruiter Details: Name: Azhar Email: **************************** Internal Id: 25-53773

Kelly is hiring a QC Analytical Chemist for a 6 -month Contract role with one of our prestigious clients based out in Dayton, NJ 08810. Job Title: QC Analytical Chemist Employment Type: 6-month contract Pay rate: $25-32/hr. Shift: 8 am - 4:30 pm It's an exciting time to be part of Quality Control team. In this position, you will assist with ensuring finished and raw materials are consistent with specifications through analytical testing. As part of the Quality Control department, you will perform wet chemistry analyses based on standard operating procedures as well as sample preparation, data acquisition, data interpretation, and reporting in support of production. You will spend your time… Calibrating and working with analytical equipment daily, including but not limited to: density meter, refractometer, pH meter, titratable acidity, spectrophotometer, moisture analyzer, KF titrator, chlorides titrator Performing tests on finished and raw materials and reporting results Preparing samples, acquiring data, interpreting results Critically thinking and assisting with the investigation of internal and external non-conformances Other duties as assigned Required Skills: Bachelor of Science Degree in Chemistry or Science related field Strong communication skills both written and verbal Knowledge of basic math and science Basic knowledge of computers and Microsoft Office Ability to multitask within the lab to efficiently maintain lab workflow If you believe you are a good fit for this opportunity, please submit your application through the job posting link. We also encourage you to share references if you have them.

A Few Words About Us - Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • Generic Pharma industry experience • Prefer experience in Dermatology products • Prefer R&D experience also Qualifications BS with 5-6 year experience or MS with 2-3 year experience. Additional Information Regards, Sukhpreet Basra Clinical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621I Direct:732-429-1921 (Tel) 732-549-2030*241 | (F) 732-549-5549

Iselin, NJ Engineering - Chemical EXP 1-2 yrs DEG Doctorate Relo Job Description The Analytics and Materials Characterization group in Iselin, NJ is part of the Catalyst Research and Development department. We provide direct analytical support to catalyst research and manufacturing platforms, including environmental, refining, chemical, solar cell and battery materials. This position is for a highly motivated Microscopist/Material Scientist to work as part of an electron microscopy group involving the characterization of catalysts, their precursors, associated assembly components and related materials. The successful candidate will have a strong materials science, analytical and catalyst background with an emphasis on microscopic evaluations, and thrive on leadership roles in multi-disciplinary catalyst research teams. Responsibilities include but are not limited to: -Operating and maintaining Microscopy instrumentation including HR FE-SEM (High Resolution Field Emission Scanning Electron Microscopy) and VP-SEM (Variable Pressure Scanning Electron Microscopy) with ancillary attachments: EDS (Energy Dispersive X-ray Spectroscopy), WDS (Wavelength-Dispersive X-Ray Spectroscopy) and STEM (Scanning and Transmission Electron Microscopy) and image analyses software suite -Supporting other microscopy areas like EPMA (Electron Probe Microanalyzer) or TEM (Transmission electron microscopy) -Collaborating with research scientists, engineers, and manufacturing associates on new-product development, fundamentals understanding and manufacturing support, with strong catalyst chemistry knowledge -Interpreting results, writing reports and sharing information with a high degree of accuracy in a fast paced analytical chemistry laboratory -Developing new microscopy capabilities, investigative strategies, and innovative microscopy methods to support knowledge and product development -Preparing a wide variety of sample types for SEM/STEM analyses using vacuum evaporation systems, microtome and trimmer; knowledge of ion-milling, FIB (Focused Ion Beam), tripod polishing, etching, and electro-polishing a plus Qualifications -PhD in materials science, physics, engineering, chemistry or related degree with 1+ years related analysis and laboratory experience preferably in industry, OR a MS degree in materials science, physics, engineering, chemistry or related degree with 3+ years of relevant industrial experience or BS degree with a minimum of 5+ years of relevant industrial experience -Strong theoretical and practical understanding of EM technologies with extensive hands on experience in solving complex materials problems using primarily FE-SEM and other technologies like VP-SEM, STEM, TEM or EPMA Solid materials characterization and heterogeneous catalysis knowledge Ability to participate at a leadership level within multi-disciplinary teams Hands-on experience in experimental design using EM and methods development for EM Knowledge of crystallography and diffraction techniques (EBSD, electron backscatter diffraction) a plus Knowledge of related AEM (Analytical Electron Microscopy) equipment and methodologies a plus Expected to work independently with minimum supervision as well as part of a team Strong organizational, time management and multi-tasking skills Demonstrated track record of a systematic approach to problem solving critical thinking skills SKILLS AND CERTIFICATIONS Does this candidate have heterogeneous catalysis and microscopy experience? IDEAL CANDIDATE Heterogeneous catalysis and microscopy experience REQUIRED Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

As the first full-time scientist on the team, you will perform hands-on formulation, drive product improvements, help establish the new lab, and influence the company's technical direction. You'll Want to Explore this Opportunity Because: You will contribute immediately in the lab while also helping to build and shape a new product development function from the ground up in a company with an aggressive growth plan. (More chemists to be hired soon). You'll work directly with a passionate, visionary CEO who values collaboration, scientific insight, and real innovation. He's demonstrated an open mindset and is driven by continuous learning and improvement. Join an entrepreneurial team of people who are driven, curious, and deeply committed to building a brand that's changing the way things are done in their industry. What You'll Be Doing: This is a hand-on lab position with a build in progressing from formulation chemist to synthesis and project ownership. Lead the development of innovative chemical formulations and new product forms. This may also involve reverse engineering of 3rd party chemicals currently marketed and sold. Develop improvements to existing products to boost performance and address supply chain challenges. Participate with the R&D Consultant/Advisor in opening the new R&D lab. Translate market insights and company priorities into actionable product concepts. Oversee efficacy, user experience, safety, shelf life, and regulatory testing to ensure product excellence. Manage pilot studies and field trials to confirm real-world performance. Act as the scientific expert on water treatment chemistry, particularly in customer service and education. Collaborate with Operations and Marketing teams to take products from concept to commercialization. What You'll Bring to the Job: Ph.D. or M.S. in Chemistry or related field. 5+ years of hands-on experience in chemical product development, ideally in the specialty chemical or water treatment chemicals space Proven success in formulating products and bringing them to market. Strong analytical skills with expertise in experimental design and statistical analysis. Familiarity with regulatory frameworks (such as EPA, NSF etc.) and safety testing protocols. Experience with water treatment technologies is highly preferred. Must be authorized to work for any U.S. employer without sponsorship now or in the future. Our client is an Equal Opportunity Employer with fantastic benefits as described below: 20 days PTO Medical Insurance: 3 plan levels ($300-$6,350 deductibles; 80-100% coverage) Dental Insurance: PPO plan with $1,500 annual max; 100% preventive, 90% basic, 60% major; orthodontia up to $1,500 Vision Insurance: $10 copays; $150 frame or contact allowance every 12 months Life Insurance: 2× salary up to $500,000, company-paid Voluntary Life & AD&D: Employee up to $300K; spouse/child up to 50% of employee coverage Long-Term Disability: 60% of monthly earnings, up to $12,000, company-paid Continuing Education & Tuition Assistance Employee Assistance Program and Wellness Benefits If you're passionate about product development, eager to lead innovation in a fast-paced environment, and ready to make an impact, this opportunity is for you! Apply now!

Analytical Chemist-Florham Park, NJ Arxada is a global leader in innovative solutions that protect our world. Our groundbreaking technologies, in-depth regulatory know-how, manufacturing and process development help our customers to safeguard nutrition, health and infrastructure efficiently through chemistry and biotechnology that enhance sustainability. We offer a broad portfolio of ingredients and services for multiple end-markets that include Human Health & Nutrition, Home & Personal Care, Professional Hygiene, Paints & Coatings and Wood Protection. With customers in more than 100 countries, the company achieved sales of CHF 2 billion in 2024. Headquartered in Basel (Switzerland), Arxada employs 3,200 associates across 24 production sites and 14 R&D centers, all committed to our customers' success. As a member of the Analytical Chemistry team, the candidate has an important role to play in support of a wide range of tasks including the analysis of R&D and customer samples, as well as troubleshooting issues related to manufacturing and customer complaints. The incumbent will utilize a variety of analytical techniques to deliver accurate and timely results in a dynamic, fast-paced environment Essential Job Functions: Perform analytical testing on R&D, customer and production samples using chromatographic, spectroscopic, wet chemistry, and other techniques. Develop, validate, and optimize analytical methods for both new and existing products and raw materials as needed. Ensure analytical results are accurate, reliable, and delivered within required timelines, following proper documentation protocols. Prepare technical reports and data summaries for internal use and customer reporting. Collaborate with R&D, manufacturing, and quality teams to support product development, resolve manufacturing issues etc. Adhere strictly to company policies, health and safety guidelines, and ISO Quality Management procedures. Perform additional duties and special projects as assigned. Qualifications & Experience: Bachelor's or master's degree require in preferred areas of study: General or Analytical Chemistry 5 years analytical professional experience with bachelor's degree or 2 years' experience with Masters degree Proficient in HPLC (UPLC), GC, spectroscopy ( UV-Vis, FT-IR), wet chemistry, and other modern techniques as well as sample preparation techniques Proficient with common software, including MS Office Effective written and verbal communication skills The expected salary range for this role is 75-92k annually, but specific employee compensation may vary depending on factors including experience, education, training, licensure, certification, location and other job-related, non-discriminatory factors permitted by law. This role is also eligible to earn a short-term incentive bonus and the following benefits: 401(k) plan, medical, dental, vision, life, and disability insurance, paid time off, paid holidays and paid sick leave. Arxada has world class offering in two distinct areas: Microbial Control Solutions (MCS) focuses on threats posed by microorganisms to people and planet through five distinct business lines including Professional Hygiene, Home & Personal Care, Wood Protection, Paints & Coatings and Material Protection. Nutrition, Care & Environmental (NCE), meanwhile, provides materials used to manufacture composites for electronics, aerospace and other markets, as well as vitamins and nutritional ingredients, chemicals and performance intermediates, and raw materials for a wide range of high-performance applications. Arxada is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a qualified individual with disability, protected veteran status, or any other characteristic protected by law. #LI-BR1 US41

AIRCO is a world leader in carbon conversion technology, paving the way to global energy security by transforming CO₂ into a valuable resource. Its proprietary AIRMADE™ Technology is an adaptable platform that allows any industry to efficiently produce high-demand, fully-formulated synthetic fuels from waste CO₂ and hydrogen. The company has commercial partnerships with airlines including JetBlue and Virgin Atlantic, amongst others, and has been awarded multiple government contracts, including with NASA and the United States Department of Defense's Defense Innovation Unit. The company has received industry recognition through awards such as Time Best Inventions, Inc. Best in Business, Fast Company World Changing Ideas, and the XPrize for Carbon Removal. AIRCO's many accolades include winning the prestigious Green Chemistry Challenge Award from the Environmental Protection Agency in October 2023, an award given to organizations that reinvent processes to reduce the generation of hazardous substances and byproducts. AIRCO was also declared a winner for the World Economic Forum UpLink Sustainable Aviation Challenge, which accelerates the development of promising technology pathways that enable widespread uptake of SAF. The Position We are seeking an Analytical Chemist to join our team. This role will report to our Senior Analytical Chemist. This position will play a key role in our analytical chemistry laboratory, supporting research and development efforts, conducting quantitative analysis, and ensuring high-quality control of analytical data. The candidate should have experience with Chemstation and Chromeleon, and ideal industry experience in chemical, pharmaceutical, or environmental sectors. This role will be based in New Britain, PA with initial 3 month training in Brooklyn, PA. What you get to do Operate, maintain, and troubleshoot GC, GCMS, and LC instruments. Perform routine and non-routine sample analysis using GC, GCMS, and LC techniques, interpret data, and prepare analytical reports with high attention to detail and accuracy. Develop and validate analytical methods for the quantitative analysis of samples using GC, GCMS, and LC techniques, following established protocols and industry standards. Conduct sample preparation techniques, including extraction, derivatization, and purification, as necessary for analysis. Collaborate with other team members to ensure timely delivery of analytical results, and effectively communicate any deviations or issues encountered during analysis. Assist in the maintenance of laboratory equipment, including calibration, troubleshooting, and documentation of instrument performance. Follow all safety protocols and maintain a clean and organized laboratory environment. Other duties as needed. What you bring to AIRCO Bachelor's in Analytical Chemistry or related field and 2+ years of experience in operating and maintaining GC, GCMS, and LC instruments, and developing analytical methods using these techniques. In-depth knowledge of Chemstation and Chromeleon software, ensuring optimal performance and reliability. Strong understanding of the principles of analytical chemistry, quantitative analysis, and quality control. Proficiency in interpreting and analyzing complex analytical data, and preparing detailed analytical reports. Familiarity with relevant industry standards, regulations, and guidelines. Ideal industry experience in chemical, pharmaceutical, or environmental sectors. Excellent problem-solving skills, with the ability to troubleshoot and resolve instrument issues. Ability to work independently and in a team-oriented environment. Strong communication skills, both written and verbal. Ability to prioritize and manage multiple tasks effectively. Attention to detail and accuracy in all aspects of work. Salary Range: $80-85K The approximate annual base compensation range and benefits listed above may vary based on the applicant's experience, skills, abilities, and relevant industry expertise. Working at AIRCO - In addition to standard medical and dental benefits, that kick in Day 1, we provide: Comprehensive Health Benefits Full coverage for employee base premiums on health, dental, and vision insurance. 70% coverage for spouse and dependent base premiums. Choose between base plans or enhanced options to fit your needs. Health Savings & Flexibility Access company-sponsored HSA and FSA accounts to save on healthcare and dependent care expenses. Income Protection & Insurance Company-paid Short-Term Disability insurance. Optional Long-Term Disability and Life Insurance plans. Time Off & Leave Flexible and generous paid time off, including national holidays and sick leave. Paid family leave to support you during important life moments. Retirement Savings Tax-deferred 401(k) plan with a 3% company match to help you invest in your future. Commuter Benefits Pre-tax savings on transit and parking, plus monthly company contributions. Additional Perks Ancillary benefits through Sequoia, including pet insurance and financial wellness programs. Employee wellness program to support your well-being.Inclusive of Wellhub & One Medical. Company-sponsored events and programs that promote an inclusive and values-driven workplace. In person weekly catered lunch every Wednesday. At AIRCO we value employees for their unique perspectives. We are an inclusive affirmative action Equal Employment Opportunity employer. We consider applicants without regard to actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, present or past history of intellectual, learning, mental, or physical disability (including but not limited to blindness) unless AIRCO determines that such disability prevents performance of the work involved, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Don't meet every single requirement? Studies have shown that women, marginalized genders and people of color are less likely to apply to jobs unless they meet every single qualification. At AIRCO we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the , we encourage you to apply anyways. You may be just the right candidate for this or other roles This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls, security classification and/or designation as Controlled Unclassified Information. Employment in this position is conditioned on the candidate's ability to obtain and maintain appropriate government authorization to access technology or information, to the extent required, including without limitation a security clearance, export license, or other documentation required to establish authorization to receive access to such items technology or information. We may delay commencement of employment, rescind an offer of employment, terminate employment, and/or modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as we deem appropriate, in order to ensure compliance with applicable government access control restrictions. At AIRCO we value employees for their unique perspectives. We are an inclusive affirmative action Equal Employment Opportunity employer. We consider applicants without regard to actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth, pregnancy-related conditions, and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, present or past history of intellectual, learning, mental, or physical disability (including but not limited to blindness) unless AIRCO determines that such disability prevents performance of the work involved, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Don't meet every single requirement? Studies have shown that women, marginalized genders and people of color are less likely to apply to jobs unless they meet every single qualification. At AIRCO we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles This position requires access to technology, software and other information that is subject to governmental access control restrictions, due to export controls, security classification and/or designation as Controlled Unclassified Information. Employment in this position is conditioned on the candidate's ability to obtain and maintain appropriate government authorization to access technology or information, to the extent required, including without limitation a security clearance, export license, or other documentation required to establish authorization to receive access to such items technology or information. We may delay commencement of employment, rescind an offer of employment, terminate employment, and/or modify job responsibilities, compensation, benefits, and/or access to Company facilities and information systems, as we deem appropriate, in order to ensure compliance with applicable government access control restrictions. I consent to transfer my data to Air Company in the U.S. and to its use in accordance with the Air Company , and I opt in to receiving information from Air Company. Air Company does not sell or share personal information to third parties within the meanings given under applicable laws.

We are THG, a global ecommerce group on a mission to be the global online leader in beauty and sports nutrition. Our portfolio of leading retailers and brands such as LOOKFANTASTIC, Myprotein, ESPA, Perricone MD, and Cult Beauty form our two core businesses: THG Beauty and THG Nutrition. With us, you'll go further, faster. What are you waiting for? Life at THG Beauty We know that beauty isn't one-size-fits-all. Our portfolio of leading retailers and iconic beauty brands caters to everyone, everywhere, empowering customers all over the world to look and feel fantastic. By combining our portfolio of owned brands with a marketplace for over 1,300 third-party beauty brands through online retail sites LOOKFANTASTIC, Cult Beauty, and Dermstore, THG Beauty's ambition is to be the global digital partner of choice across the beauty industry, supporting the channel shift to online. THG Beauty's breadth of relationships is unique to the beauty market; it engages with brands as a retailer, a brand owner, and a product developer and manufacturer, making it the industry's digital strategic leader. About Bentley Labs Bentley Laboratories is a premier beauty contract manufacturer based in Edison, NJ. For over twenty years, Bentley has been a trusted supplier for the world's top global beauty brands, creating and producing award-winning innovations across the skincare, bodycare, haircare, hygiene and color cosmetics categories. Bentley's core manufacturing capabilities include OTC'S; skincare emulsions; surfactant systems for haircare, bath & body products; hot fill processing for solid stick deodorants, lip balms, and other wax systems; and powders for dry shampoos and loose powder face applications. Known for its innovation capabilities, quality, and manufacturing excellence, Bentley maintains the highest standards in GMP compliance, safety, and operational efficiency. Why be a Chemist at Bentley Labs? The Junior Chemist will be qualified to degree level or equivalent and have at least 2-3 year of experience within cosmetic development. They will be responsible for making lab batches, performing stability and taking product briefs from concept through to completion under guidance of R&D manager. Chemist reports to the Senior R&D Manager. As a Chemist, you'll: Review new Product development requests (PDR's) and collaborates with respective Sales Executives for further clarification if required and ensure successful completion of the project. Formulate OTC and non- OTC personal care, skin care, hair care and sun care products leveraging in-depth knowledge of chemical Ingredients and processes that meet the desired technical and aesthetic attributes outlined by customers on PDR Effectively manages multiple projects within established timelines, prioritizing tasks to ensure timely delivery and optimal outcomes. Prepare lab batches of formulas needed for submitting samples for customer analysis within lab schedule, and reformulate/resubmit them based on customer's feedback Stay current with emerging ingredients and technologies in the cosmetic industry, incorporating innovative solutions into new products. Optimize formulations to improve performance, cost-effectiveness, and production efficiency. Provide Sales Executives and customers technical support, participation on account teams and teleconferences Maintain thorough documentation of all R&D activities in accordance with Good Laboratory Practice (GLP) standards. Develop detailed lab scale process for success including order of addition, critical raw materials and processing parameters, bench standard and benchmark, and lab scale preliminary specification and test results Collaborate with Regulatory team to meet all compliance requirements. Contribute to the development of internal knowledge databases, SOPs, and training materials for the R&D team. Attend conferences, workshops, and other professional development opportunities to further expand expertise in cosmetic formulation and development. Take reasonable care of the health and safety for yourself and other people who may be affected by your work. Adhere to a cGMP environment, document and follow lab procedures with attention to detail. Help create a positive work culture, by continually coaching a safe working environment What skills and experience do I need for this role? 2+ years of experience in cosmetic formulation development and R&D Bachelor's degree in chemistry, Biochemistry, Chemical Engineering or related fields. Strong time and project management skills. Knowledge of basic regulatory requirements (FDA, CTFA and PCPC) for formulation. Knowledge of current good manufacturing practices(cGMP) Professional oral and written communication skills. Good problem solving and decision-making skills. Displays a sense of urgency and initiative with Creativity and flexibility. Able to work in a fast-paced environment. Must be a team player. What's in it for me? Career Development Access bespoke development programmes that have been designed and developed by our in-house L&D team. Continued development through our upskilling programme that is delivered in partnership with an industry-leading training provider. Enhanced Leave Salary: $78,374 per annum 25 days annual leave plus bank holidays. Don't want to work on your birthday? We don't either! Enjoy your day off on us! Enhanced maternity and paternity pay, depending on length of service. Up to 10 days compassionate leave. Buy back up to 3 days each year. Unlock 2 days volunteer leave after 12-months. Wellbeing Support Access face-to-face and virtual appointments with our in-house GP. Access our in-house CBT therapist. Access our 247 Employee Assistance Programme (EAP) which is provided by Bupa. State-of-the-art on-site gym. Access to our on-site physio. Other Perks Save up to 12% on the cost of personal tech through our salary sacrifice scheme. Subsidised bus pass from Manchester City Centre to our ICON office. Up to 50% staff discount on THG brands. On-site staff shop. Access to on-site barber. Know someone who would be perfect for THG? Refer them and get up to £1000 when they pass their probation. Anniversary gifts when you hit 5 and 10 years of service. THG is proud to be a Disability Confident Committed employer. If you are invited to interview, please let us know if there are any reasonable adjustments we can make to the recruitment process that will enable you to perform to the best of your ability. THG is committed to creating a diverse & inclusive environment and hence welcomes applications from all sections of the community. Because of the high volumes of applications our opportunities attract, it sometimes takes us time to review and consider them all. We endeavour to respond to every application we receive within 14 days. If you haven't heard from us within that time frame or should you have any specific questions about this or other applications for positions at THG please contact one of our Talent team to discuss further.

The Quality Control Chemist-II is responsible for performing a variety of complex analytical testing, ensuring the quality of dietary supplements and OTC products through testing, documentation, and compliance with regulatory standards. This position also involves reviewing and maintaining SOPs, Testing Procedures, calibrations, and other controlled documents to support quality assurance activities. Additionally, the Chemist-II will assist with troubleshooting and minor repairs of laboratory equipment and support stability testing and documentation. This mid-level position will require more independent work, the ability to mentor QC chemist-I and Lab Tech personnel, and involvement in process improvements and corrective actions. ESSENTIAL FUNCTIONS ( Essential functions, as defined under the Americans with Disabilities Act, may include the following tasks, knowledge, skills and other characteristics. This list of tasks is illustrative ONLY and is not a comprehensive listing of all functions and tasks performed by positions in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned.) Coordinates with other QC Supervisors and laboratory management so that the shared resources such as laboratory instruments, reagents, etc. are available for assigned staff to perform their job duties effectively and efficiently. Performs the pharmaceutical OTC & Dietary supplement analysis to support OTC & Dietary Supplement manufacturing which includes assay, impurity, dissolution testing, content uniformity, and physical testing. Conduct Analysis in compliance with cGMP requirements, compendia standards, and internal procedures. Maintain accurate record of analysis and perform documentation to company standards Perform laboratory analysis right first time, contemporaneous documentation, analyze and document the results. Notify manager immediately of nonconforming data or unexpected occurrences. Reviews and analyzes the stability samples and associated analytical data, prepares or assists in preparing Stability Summary Reports for Annual Product Review Reports. Reviews/Checks of analytical data by following test methods/SOPs. Performs operational qualification on analytical instruments, analytical method verification/validations, validation protocols and reports for analytical methods. Conducts laboratory investigation (OOS/OOT) under the supervision of laboratory management. Organize work schedule to complete assigned tasks efficiently and on schedule. Work under direction provided by supervisor and other duties as assigned Assist in Training and monitoring of the new hires (trainees) in learning or performing basic skills and assists in evaluating the need of any potential equipment for laboratory. Ensures the laboratory is kept in a safe working environment and in compliance with OSHA and other laboratory safety standards. Maintains knowledge of the latest guidelines of regulatory requirements of International Conference of Harmonization, USP, USFDA and OSHA. Complies with all regulatory/ in-house requirements may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, cGLP, documentation. Assists in compilation of regulatory documents. Managing the Pharmacopeia changes and up gradation and implementing the same after upgrading the change repeated documents through proper channels of change control and training to all concerned. EXPERIENCE AND QUALIFICATIONS T o perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the experience and education required : EDUCATION & EXPERIENCE o Bachelors degree in Chemistry or related science field with eight (8) to ten (10) years lab experience in a pharmaceutical chemical or related industrial experience; preferably solid dosage forms manufacturing. Method Development experience is preferred. o Masters degree or higher with six (6) to eight (8) years of progressive lab experience in a pharmaceutical chemical or related industry; preferably generic pharmaceuticals. Method Development experience is preferred. o Demonstrated skills and experience in leading a group of QC Chemists. COMPUTER SKILLS o Basic knowledge of computers using MS Office, MS Outlook and business software systems commonly used in the pharmaceutical industry required. MATHEMATICAL SKILLS o Requires a strong knowledge of algebra, calculus and statistics and how they are applied. o Math skills commensurate with scientific background are required. KNOWLEDGE, SKILLS AND ABILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and abilities required : INDUSTRY KNOWLEDGE: Knowledge and experience of applicable FDA regulatory standards and requirements for the solid oral dosage manufacturing required. Knowledge of analysis of pharmaceutical dosage forms and raw materials utilizing HPLC, GC, ICP-MS, UV, TLC, dissolution testing, spectroscopic and wet chemistry techniques is a plus. COMMUNICATION SKILLS: Advance level of written and verbal communication skills with the ability to read, technical procedures or governmental regulations. Ability to write reports, and required documentations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Must possess initiative and trouble shooting ability.

As a QC Chemist, you will be responsible for performing day-to-day laboratory activities under prescribed procedures, including qualitative and quantitative analysis, solution preparation, calibration, qualification, and maintenance of laboratory instrumentation. You will also conduct environmental monitoring, assist with technical writing, and perform administrative tasks. Additionally, you will contribute to solving problems, reviewing experimental data, writing protocols/SOPs/validation reports, and training support staff as necessary. You will monitor study procedures to ensure data accuracy and report quality while maintaining a GMP/GLP laboratory. Responsibilities * Conduct analysis in compliance with cGMP requirements, compendia standards, and internal procedures. * Maintain accurate records of analysis and perform documentation to company standards. * Prepare test solutions, volumetric solutions, and samples used in analysis. * Perform assigned sampling, physical, chemical tests and assays on raw materials, active pharmaceutical ingredients, in-process, finished bulk, finished product, and stability products analysis in an FDA regulated lab environment. * Use a variety of analytical instruments such as HPLC, GC, Dissolution, Malvern particle size analyzer, IR, Auto Titrator, UV Spectrophotometer, KF, Potentiometer, etc. * Perform analysis with a practical understanding of the test procedure and instrument operation. * Conduct laboratory investigations under the supervision of the laboratory manager. * Perform maintenance and calibrations of laboratory instruments/equipment. * Comply with all regulatory and in-house requirements including safety, housekeeping, laboratory chemical waste, cGMP, cGLP, and documentation. * Maintain the required level of training needed to perform GMP tasks. * Prepare and/or review test procedures, SOPs, and protocols as assigned. Essential Skills * Proficiency in current Good Manufacturing Practices (cGMP), FDA, and other regulatory requirements. * Experience with analytical techniques such as Dissolution, FT-IR, GC, UV-VIS, KF, TLC. * Knowledge of computer applications and programs related to laboratory applications such as HPLC, FTIR, TOC. * Familiarity with sampling methods and quality control systems. * Understanding of mathematics including statistics. * Proficiency in sample preparation techniques, spectroscopic techniques, and chromatographic systems. * Basic computer knowledge including MS Word, Excel, and Outlook. * 3-5 years of routine testing using HPLC and Dissolution. * Experience with solid oral dosage and focus on raw material, finished product. * Pharma GMP experience, laboratory, wet chemistry, titration, chromatography. Additional Skills & Qualifications * Bachelor's or master's degree in Pharmaceutical, Biological, Chemical science or related field. * 5-6 years of related laboratory work experience; minimum of 5 years as a QC Chemist in a GMP environment. * Ability to work successfully in both a team/matrix environment and independently. * Ability to work in a fast-paced environment, manage priorities and maintain timelines for multiple projects. * Ability to work safely in a chemical laboratory. * Ability to perform basic calculations, read, write, communicate, and handle stress produced by time pressure, customer demands, etc. * Must be able to access all laboratory, manufacturing, and office areas. * Must be able to wear the required PPE for entering laboratory and processing areas. * Specific vision requirements include reading written documents and using a computer. * Ability to sit or stand for prolonged periods and occasionally lift up to 25 lbs. with or without assistance. Work Environment You will be working in a laboratory setting with approximately 10 people. The laboratory is equipped with modern instrumentation and follows strict safety and regulatory protocols. The work environment requires wearing personal protective equipment (PPE) and involves standing or sitting for prolonged periods. The laboratory operates under a fast-paced and dynamic atmosphere, providing an excellent opportunity for growth and development. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cranbury,NJ. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

A Product Development Scientist role involves a wide range of activities, including developing and optimizing new product formulations and processes, conducting laboratory testing and evaluations. Key responsibilities: Include batching several iterations, ensuring technical accuracy in product development through stability studies, and documentation. Working with the team, time management, attention to detail, strong analytical skills, strong communication, following the timeline. Consumer Products - Skin Health Education: BA Degree Experience: 2 to 4 years experience

Princeton NuEnergy (PNE) is excited to announce future opportunities to join our innovative Research & Development team, focused on pioneering advancements in the direct recycling and upcycling of spent Lithium-ion battery materials. Our mission is to deliver a cost-efficient, environmentally friendly solution to the current industry pain points of high operational costs and low efficiency in battery recycling. We aim to solve these challenges by improving battery recycling efficiency and purity, thereby revolutionizing the lithium-ion battery recycling landscape. About Us: PNE is a lithium-ion battery direct recycling and critical materials recovery innovator, founded out of Princeton University. At its core, PNE's patented recycling technology is based on a low-temperature plasma-assisted separation process (LPAS) that does not damage but, rather, reclaims and repairs cathode material from spent lithium-ion batteries and manufacturing scrap at half the cost with significantly lower waste when compared with existing traditional recycling processes. Our state-of-the-art laboratory is located in Princeton, New Jersey, where we are dedicated to pushing the boundaries of sustainable energy technologies. We are building a team of passionate and talented individuals to drive forward our cutting-edge research initiatives. Potential Roles: We anticipate openings for the following positions in the near future: * Research Scientist * Process Engineer * Technician Ideal Candidates: We welcome applications from candidates with expertise in: * Battery cathode material synthesis and related research experience. * Plasma physics, particularly in device development and experimental applications. * Chemical Engineering (with a focus on inorganic chemistry), Materials Science & Engineering, Chemistry, or related areas of study. If you are passionate about sustainability, innovation, and advancing the future of energy storage, we would love to hear from you! Princeton NuEnergy, Inc. is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status under federal, state, and local laws.

About Atrium: What you do matters. As a people-centric organization, we foster an environment of collaboration, high performance, and innovation where your talents are valued and your achievements are celebrated. Join us and become part of an inclusive team. Client Overview: Our client is a leading pharmaceutical contract development and manufacturing organization (CDMO), specializing in oral solid dosage and ingestible powder products. They partner with pharmaceutical companies to support drug development and manufacturing needs with a strong focus on quality, compliance, and innovation. They are now looking for a Quality Control Chemist. Salary/Hourly Rate: $30/hr - $33/hr Position Overview: Our client is seeking a skilled Quality Control Chemist to join their onsite team. The Quality Control Chemist will play a critical role in quality control testing, data interpretation, and regulatory compliance within a fast-paced pharmaceutical CDMO environment. This position is ideal for candidates with hands-on experience in analytical instrumentation and a strong understanding of GMP standards. Responsibilities of the Quality Control Chemist: * Perform QC testing of raw materials and finished products (tablets, capsules, and other dosage forms) using techniques such as HPLC, UPLC, GC, UV-Vis, FT-IR, dissolution apparatus, and particle size analysis. * Independently interpret and report analytical results, maintaining detailed and accurate laboratory records. * Ensure compliance with regulatory standards including FDA and EMA guidelines. * Operate, calibrate, and maintain analytical instruments and laboratory equipment. * Collaborate with cross-functional teams including R&D and production to support product development and release. * Provide technical support and training to junior staff as needed. Required Experience/Skills of the Quality Control Chemist: * 3 - 7 years of hands-on experience in a pharmaceutical analytical laboratory. * Proficiency with analytical instruments such as HPLC/UPLC, GC, UV-Vis, FT-IR, and dissolution apparatus. * Strong documentation skills aligned with cGMP guidelines. * Ability to troubleshoot analytical techniques and instrumentation. * Excellent attention to detail and problem-solving capabilities. Preferred Experience/Skills of the Quality Control Chemist: * Experience working in a CDMO environment. * Familiarity with ingestible powder and oral solid dosage product testing. * Knowledge of international regulatory standards and quality systems. Education Requirements: * Bachelor's degree (minimum) in Chemistry, Analytical Chemistry, Biochemistry, Biology, or a related scientific field. Benefits: * Atrium Care Package available, upon eligibility (including healthcare plans, discount programs, and paid time off).

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services. Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential. As a Laboratory Technician, under general supervision, performs laboratory tests to determine the performance, chemical, and/or physical composition of consumer products. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performs routine laboratory testing, following the relevant company's Standard Operating Procedures (SOP's) and methods. Validate performance on methods as required. This position conducts sample preparation, extractions, and digestion of various organic and inorganic substances for consumer product testing purposes. Perform extractions in order to prepare samples for instrumentation. Digests samples to support testing needs. Coordinates samples submitted for Chemistry testing by the Central Processing team. Confirms that the samples submitted are enough to perform the required/requested testing Test to applicable standards (ASTM, CSPA, ISO, SSC, etc.) and customer-specific protocols. Determines the type of testing based on the appropriate guidelines and regulations. Demonstrates good and safe work habits and enforces a clean working environment. May be required to receive, sort, log client samples into the database, and prepare sample labels. May be required to archive, return, or dispose of client samples as per the established procedure. Perform daily, weekly, and monthly Quality Assurance/Quality Control checks on equipment. Assist in keeping inventory of laboratory chemicals and equipment necessary for the day to day functioning of the laboratory and in compiling a list of supplies to be ordered when needed. Assists in calibration/verification tasks and other ISO 17025 related activities. Ensure all personal protective equipment (PPE) relevant for tasks are worn at all times. Adheres to internal standards, policies, and procedures Performs other duties as assigned. Qualifications Required: Associates Degree in Chemistry or related scientific disciplines preferred Working in a lab setting with experience following strict safety standards, or equivalent education and experience Preferred: Bachelor's Degree or above in related scientific disciplines Computer Skills: Microsoft Office Suite (Outlook, Excel, and Word) - Basic user proficiency required Ability to work independently under the direct supervision Ability to execute detailed but uninvolved written or oral instructions Ability to read and understand documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to deal with problems involving a few concrete variables in standardized situations Ability to follow directions to ensure the end results are accurate and completed with the required timeframe Pay Range: $21.00-$26.00/ hour Additional Information Benefits Competitive salary. Comprehensive health, dental, and vision insurance for full time employees. Retirement savings plan. Continuous professional development and training opportunities. A dynamic, collaborative work environment. Access to cutting-edge cryptographic technology and tools. Physical Demands of the Job Stand: Occasionally Move or traverse: Frequently Sit: Constantly Use hands: Constantly Reach with hands and arms: Occasionally Climb or balance: Occasionally Stoop, kneel, crouch or crawl: Occasionally Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Occasionally 30 lbs Additional information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Our client is seeking Full -Time Clinical Lab Technologists for their Chemistry Lab! Full time - Alternate Weekends 11:30 pm - 8:00 am 10% night shift differential!! Perform routine and emergency tests on blood and other body fluids using a variety of automated and manual instrumentation promptly. Maintain equipment and records according to department procedures and regulatory agencies guidelines in the areas of QA and QC. Use independent judgment to solve technical and procedural problems. In some instances, the ability to stand or sit for extended periods of time is necessary. Pay Range based on experience: $82,979.96 - $103,286.06 Requirements Must have an active New York license At least 2 years of work experience preferred Bachelor's Degree in physical science, medical technology preferred. Benefits 1199 Members Medical & Dental 403B matching up to 8% of salary Room for Growth Great leadership and support, utilizing the latest advances in computer technology.

Analytical Chemist will be engaged in the different laboratory testing using a range of analytical equipment and techniques within GMP laboratory. MAJOR DUTIES/RESPONSIBILITIES: Perform assigned testing including but not limited to the physical, chemical tests per in-house written procedures and compendial monograph for the raw materials, active pharmaceutical ingredients, in-process, finished and stability products, using various wet chemistry, physical and instrumental techniques such as LC, GC, UV-Vis Spectrophotometer, dissolution, IR, Particle Size Analyzer, KF Auto titrator, Bulk Density, and other routine QC instruments. Document work clearly and perform tests accurately. Record data and results as specified in documentation procedures. Maintain proper laboratory logbooks, notebooks and other records all the time. Report and participate in the deviations and investigations. Comply with all regulatory/in-house requirements (may include but not limited to safety, housekeeping, laboratory chemical waste, cGMP, cGLP, documentation) when performing the assigned activity. · Labels, transcribes and records documentation such as report sheets and laboratory notebooks as required by Standard Operating Procedures (SOPs). · Perform laboratory related other duties as assigned. MINIMUM/PREFERRED REQUIREMENTS: Education: Bachelor's Degree in Science/Chemistry Experience: Based on the position level, must require minimum 2-10 years prior experience working in the Quality Control Laboratory in a cGMP environment, preferably in pharmaceutical industry. Hands on Empower-3 experience is plus. QC experience in Generic Pharmaceutical industries would be preferable Knowledge in Good Documentation practices. Knowledge in USP/ FDA BENEFITS: Offers a comprehensive benefits package to employees

As the first full-time scientist on the team, you will perform hands-on formulation, drive product improvements, help establish the new lab, and influence the company's technical direction. You'll Want to Explore this Opportunity Because: You will contribute immediately in the lab while also helping to build and shape a new product development function from the ground up in a company with an aggressive growth plan. (More chemists to be hired soon). You'll work directly with a passionate, visionary CEO who values collaboration, scientific insight, and real innovation. He's demonstrated an open mindset and is driven by continuous learning and improvement. Join an entrepreneurial team of people who are driven, curious, and deeply committed to building a brand that's changing the way things are done in their industry. What You'll Be Doing: This is a hand-on lab position with a build in progressing from formulation chemist to synthesis and project ownership. Lead the development of innovative chemical formulations and new product forms. This may also involve reverse engineering of 3rd party chemicals currently marketed and sold. Develop improvements to existing products to boost performance and address supply chain challenges. Participate with the R&D Consultant/Advisor in opening the new R&D lab. Translate market insights and company priorities into actionable product concepts. Oversee efficacy, user experience, safety, shelf life, and regulatory testing to ensure product excellence. Manage pilot studies and field trials to confirm real-world performance. Act as the scientific expert on water treatment chemistry, particularly in customer service and education. Collaborate with Operations and Marketing teams to take products from concept to commercialization. What You'll Bring to the Job: Ph.D. or M.S. in Chemistry or related field. 5+ years of hands-on experience in chemical product development, ideally in the specialty chemical or water treatment chemicals space Proven success in formulating products and bringing them to market. Strong analytical skills with expertise in experimental design and statistical analysis. Familiarity with regulatory frameworks (such as EPA, NSF etc.) and safety testing protocols. Experience with water treatment technologies is highly preferred. Must be authorized to work for any U.S. employer without sponsorship now or in the future. Our client is an Equal Opportunity Employer with fantastic benefits as described below: 20 days PTO Medical Insurance: 3 plan levels ($300-$6,350 deductibles; 80-100% coverage) Dental Insurance: PPO plan with $1,500 annual max; 100% preventive, 90% basic, 60% major; orthodontia up to $1,500 Vision Insurance: $10 copays; $150 frame or contact allowance every 12 months Life Insurance: 2× salary up to $500,000, company-paid Voluntary Life & AD&D: Employee up to $300K; spouse/child up to 50% of employee coverage Long-Term Disability: 60% of monthly earnings, up to $12,000, company-paid Continuing Education & Tuition Assistance Employee Assistance Program and Wellness Benefits If you're passionate about product development, eager to lead innovation in a fast-paced environment, and ready to make an impact, this opportunity is for you! Apply now!

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions * After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of prep instruments/equipment * May assist with validation and MDL studies. * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Maintains Laboratory Notebook where applicable. * Adheres to internal standards, policies, and procedures. * Performs other duties as required. Qualifications * High school diploma (Required) * 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) * Associates Degree in a Chemistry or similar scientific discipline (Preferred) * 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Language Skills: English (Required) * Mathematical Skills: Basic (Required) * Reasoning Skills/Abilities: Basic (Required) * Computer Skills: Basic (Required) * Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.