Chemist jobs in Plainfield, NJ

Looking for candidates at Chemist I, II and III levels responsible for carrying out analytical method validation/verification activities and testing for Oral Solids, Oral Liquids, Topicals and Powders. MAJOR DUTIES/RESPONSIBILITIES: Develop/Validate/Verify analytical (HPLC, GC, ICP-MS/OES, other) methods for assay and impurities determination in drug substances and drug products. Perform wet chemistry and chromatographic testing for raw materials and products under development phase Perform stability studies for drug products in development phase and generate reports Develop and validate cleaning methods and generated study protocols and reports Prepare relevant protocols, reports, and final methods Maintain proper instrument calibration status Ensure that work is carried out safely and in compliance with the organization's quality system Ensure that quality documentation is generated and updated to reflect current best practice in a timely manner. Perform peer review at Chemist III level, not required if you're applying for Chemist I/II levels. Perform other duties as assigned. MINIMUM/PREFERRED REQUIREMENTS: Education: Bachelor or Master's degree in science or Pharmaceutics. Experience: Bachelor's with 2-7 years of experience in a generic pharmaceutical analytical lab. Master's is preferred. Candidates shall be considered for different positions based on educational qualification and experience. Good understanding of cGMPs is a must for experienced candidates. PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: Laboratory and office environment Able to lift about 25 pounds. Able to stand and or sit for longer period of time. On-site, Full-time, Day Shift

The Chemical Biotechnologies Group at Merck is seeking an experienced researcher to support our high throughput capabilities. The mission of the group is to invent, develop, and implement biomolecules and biocatalytic process to advance Merck's pipeline and our impact on the scientific community. This position in our biochemistry team is responsible for lysing E. coli cell pellets to liberate enzyme in solution or generate enzyme from in vitro transcription (iv TT) mix, setting up reactions using this solution as a catalyst solution, quenching reactions and prep them for HPLC analysis, running the HPLC, and analyzing the data generated in support of our protein directed evolution workflow. The candidate will perform high throughput workflows with 96 or 384 well formats using various automation instruments. The candidate will have hand-on, extensive experience with instrumentation essential for monitoring substrates and products profiles for reactions, especially Agilent UPLC systems. In this position, the candidate will have the opportunity to work with a diverse group of team members to effectively coordinate efforts and operate multiple projects. The candidate ensures activities of assignments are executed such that project deliverables and timelines are met.

A Product Development Scientist role involves a wide range of activities, including developing and optimizing new product formulations and processes, conducting laboratory testing and evaluations. Key responsibilities include batching several iterations, ensuring technical accuracy in product development through stability studies, and documentation. Working with the team, time management, attention to detail, strong analytical skills, strong communication, following the timeline. Consumer Products - Skin Health BA Degree 2 to 4 years' experience Will need to go between Summit and Skillman office, 830-5 Skills required: documentation work organizing samples, delivering samples batching exp 2 years of formulation exp Skillman for batching - 5 days a week - majority of the role is in Skillman paperwork done in summit (1 day in summit) 4 days Skillman and 1 day summit (depend on the workload and paperwork) Timings : 8:30-5- Flexible basic lab instruments intern exp will also work making 2 batches a day and 8 batches a week About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Recruiter Details: Name: I.Prudvi kumar Email: ******************************* Internal Id: 25-50776

A Few Words About Us Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • The Analytical R&D Chemist will support the Formulations Group in developing and validating analytical methods for raw materials and finished products, reverse engineering of formulation components and analysis of stability samples. • The position will be primarily laboratory based and requires a strong background in chromatography and preferably in semi-solid dosage forms • The candidate will have a proven track record developing and validating GMP-compliant HPLC & GC methods to assess drug substance and product stability, have experience diagnosing and troubleshooting HPLC instrumentation • The scientist will routinely interact with other laboratory personnel, and will interact with vendors, customers, and business partners as necessary • Prepares technical documents, including method development/validation protocols and reports, analytical test procedures, technical reports, change controls to support FDA submissions • Executes method development and validation protocols for finished products • Reverse engineer formulation components using sample preparation and analytical procedures. • Evaluates the chemical and physical attributes of finished products such as pH, viscosity, water content, assay and content uniformity • Maintain the analytical lab including calibration, performance maintenance and log books • Ability to analyze, interpret and troubleshoot data • Follow Company's SOPs and ensure cGMP compliance • Assists in the investigation of OOS/QR and OOT data and assist in writing investigative documents • Responsible for maintaining laboratory housekeeping, cleanliness of laboratory equipment and workbenches, and other general lab responsibilities as assigned by supervisor • Might require to work on extended hours on an as-needed basis Qualifications • B.S./M.S. in chemistry, pharmacy or related discipline with 2+ years related experience • Previous experience in a cGMP laboratory setting • Ability to handle multiple projects, efficiently and timely manner • Knowledge of the generic industry, including ANDA submission • Experience with topical and ophthalmic products is preferred • Ability to work in a dynamic working environment Additional Information Thanks Warm Regards Ricky Bansal 732-429-1925

Iselin, NJ Engineering - Chemical EXP 1-2 yrs DEG Doctorate Relo Job Description The Analytics and Materials Characterization group in Iselin, NJ is part of the Catalyst Research and Development department. We provide direct analytical support to catalyst research and manufacturing platforms, including environmental, refining, chemical, solar cell and battery materials. This position is for a highly motivated Microscopist/Material Scientist to work as part of an electron microscopy group involving the characterization of catalysts, their precursors, associated assembly components and related materials. The successful candidate will have a strong materials science, analytical and catalyst background with an emphasis on microscopic evaluations, and thrive on leadership roles in multi-disciplinary catalyst research teams. Responsibilities include but are not limited to: -Operating and maintaining Microscopy instrumentation including HR FE-SEM (High Resolution Field Emission Scanning Electron Microscopy) and VP-SEM (Variable Pressure Scanning Electron Microscopy) with ancillary attachments: EDS (Energy Dispersive X-ray Spectroscopy), WDS (Wavelength-Dispersive X-Ray Spectroscopy) and STEM (Scanning and Transmission Electron Microscopy) and image analyses software suite -Supporting other microscopy areas like EPMA (Electron Probe Microanalyzer) or TEM (Transmission electron microscopy) -Collaborating with research scientists, engineers, and manufacturing associates on new-product development, fundamentals understanding and manufacturing support, with strong catalyst chemistry knowledge -Interpreting results, writing reports and sharing information with a high degree of accuracy in a fast paced analytical chemistry laboratory -Developing new microscopy capabilities, investigative strategies, and innovative microscopy methods to support knowledge and product development -Preparing a wide variety of sample types for SEM/STEM analyses using vacuum evaporation systems, microtome and trimmer; knowledge of ion-milling, FIB (Focused Ion Beam), tripod polishing, etching, and electro-polishing a plus Qualifications -PhD in materials science, physics, engineering, chemistry or related degree with 1+ years related analysis and laboratory experience preferably in industry, OR a MS degree in materials science, physics, engineering, chemistry or related degree with 3+ years of relevant industrial experience or BS degree with a minimum of 5+ years of relevant industrial experience -Strong theoretical and practical understanding of EM technologies with extensive hands on experience in solving complex materials problems using primarily FE-SEM and other technologies like VP-SEM, STEM, TEM or EPMA Solid materials characterization and heterogeneous catalysis knowledge Ability to participate at a leadership level within multi-disciplinary teams Hands-on experience in experimental design using EM and methods development for EM Knowledge of crystallography and diffraction techniques (EBSD, electron backscatter diffraction) a plus Knowledge of related AEM (Analytical Electron Microscopy) equipment and methodologies a plus Expected to work independently with minimum supervision as well as part of a team Strong organizational, time management and multi-tasking skills Demonstrated track record of a systematic approach to problem solving critical thinking skills SKILLS AND CERTIFICATIONS Does this candidate have heterogeneous catalysis and microscopy experience? IDEAL CANDIDATE Heterogeneous catalysis and microscopy experience REQUIRED Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

Analytical Chemist-Florham Park, NJ Arxada is a global leader in innovative solutions that protect our world. Our groundbreaking technologies, in-depth regulatory know-how, manufacturing and process development help our customers to safeguard nutrition, health and infrastructure efficiently through chemistry and biotechnology that enhance sustainability. We offer a broad portfolio of ingredients and services for multiple end-markets that include Human Health & Nutrition, Home & Personal Care, Professional Hygiene, Paints & Coatings and Wood Protection. With customers in more than 100 countries, the company achieved sales of CHF 2 billion in 2024. Headquartered in Basel (Switzerland), Arxada employs 3,200 associates across 24 production sites and 14 R&D centers, all committed to our customers' success. As a member of the Analytical Chemistry team, the candidate has an important role to play in support of a wide range of tasks including the analysis of R&D and customer samples, as well as troubleshooting issues related to manufacturing and customer complaints. The incumbent will utilize a variety of analytical techniques to deliver accurate and timely results in a dynamic, fast-paced environment Essential Job Functions: Perform analytical testing on R&D, customer and production samples using chromatographic, spectroscopic, wet chemistry, and other techniques. Develop, validate, and optimize analytical methods for both new and existing products and raw materials as needed. Ensure analytical results are accurate, reliable, and delivered within required timelines, following proper documentation protocols. Prepare technical reports and data summaries for internal use and customer reporting. Collaborate with R&D, manufacturing, and quality teams to support product development, resolve manufacturing issues etc. Adhere strictly to company policies, health and safety guidelines, and ISO Quality Management procedures. Perform additional duties and special projects as assigned. Qualifications & Experience: Bachelor's or master's degree require in preferred areas of study: General or Analytical Chemistry 5 years analytical professional experience with bachelor's degree or 2 years' experience with Masters degree Proficient in HPLC (UPLC), GC, spectroscopy ( UV-Vis, FT-IR), wet chemistry, and other modern techniques as well as sample preparation techniques Proficient with common software, including MS Office Effective written and verbal communication skills The expected salary range for this role is 75-92k annually, but specific employee compensation may vary depending on factors including experience, education, training, licensure, certification, location and other job-related, non-discriminatory factors permitted by law. This role is also eligible to earn a short-term incentive bonus and the following benefits: 401(k) plan, medical, dental, vision, life, and disability insurance, paid time off, paid holidays and paid sick leave. Arxada has world class offering in two distinct areas: Microbial Control Solutions (MCS) focuses on threats posed by microorganisms to people and planet through five distinct business lines including Professional Hygiene, Home & Personal Care, Wood Protection, Paints & Coatings and Material Protection. Nutrition, Care & Environmental (NCE), meanwhile, provides materials used to manufacture composites for electronics, aerospace and other markets, as well as vitamins and nutritional ingredients, chemicals and performance intermediates, and raw materials for a wide range of high-performance applications. Arxada is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a qualified individual with disability, protected veteran status, or any other characteristic protected by law. #LI-BR1 US41

Voyant Beauty believes our people are more than just employees; they're the driving force behind everything we achieve. Our culture fosters teamwork, respect, and camaraderie, ensuring that every individual's contribution is valued and celebrated. We invest in their growth, providing opportunities for development and advancement within our dynamic team. Voyant Beauty is a company that specializes in the development and manufacturing, of beauty, personal and home care products. We work with various brands, retailers, and businesses to create customer formulations and products tailored to their needs. This can include skincare, haircare, bath and body products, fragrances, and more. Essentially, Voyant Beauty serves as a one-stop-shop for companies looking to bring their beauty and personal care product ideas to life. Safety is a core value at Voyant Beauty. We prioritize the well-being of our team members, ensuring a safe and secure environment where everyone can thrive and excel. If you're seeking to be part of a team where your talents are valued, your safety is paramount, and your efforts contribute to meaningful change, then Voyant Beauty is the place for you. Come join us and be a part of our journey. A Brief Overview Ensures accuracy and reliability in laboratory testing and analysis. The QC Analytical Chemist is responsible for conducting quantitative and qualitative analysis of raw materials and products, developing analytical methods, and ensuring compliance with industry standards. What you will do * Conduct quantitative and qualitative analysis of raw materials and products. * Collaborate with production teams to troubleshoot production issues. * Ensure compliance with industry standards and regulations. * Prepare technical documents and reports. * Develop and validate analytical methods. * Calibrate and maintain analytical instrumentation. * Manage standard chemical inventory and safety protocols. * Some duties may vary slightly by location. Education Qualifications * Bachelor's Degree in Chemistry or related scientific discipline (Preferred) Experience Qualifications * 1-3 years Analytical chemistry in a manufacturing environment (Preferred) * 1-3 years Method development and validation (Preferred) Skills and Abilities * Analytical Chemistry (High proficiency) * Quality Control (Medium proficiency) * Laboratory Safety (Medium proficiency) * Technical Documentation (Medium proficiency) * Regulatory Compliance (Medium proficiency) * Data Analysis (Low proficiency) * Instrumentation Calibration (Low proficiency) * Method Validation (Low proficiency) * Chemical Handling (Low proficiency) * Collaboration (Low proficiency) To Staffing and Recruiting Agencies: Our company does not accept unsolicited curriculum vitae's or applications from agencies. We are not responsible for any fees related to unsolicited curriculum vitae's or applications and explicitly reserve its right to contact candidates presented in such unsolicited curriculum vitae's or application. Our company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, color, national origin, sexual orientation, age, disability or veteran status. Voyant Beauty will consider requests for accommodations due to a disability impacting a qualified employee's ability to perform the essential functions of their position consistent with applicable laws. In addition to federal law requirements, Voyant Beauty complies with applicable provincial and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Join a Fortune 500 leader in the personal care industry, dedicated to delivering innovative, high-quality products that inspire confidence and wellness. We are seeking a Formulation Chemist to contribute to the development of cutting-edge consumer health and personal care solutions. Position Summary The Formulation Chemist will play a key role in designing, optimizing, and testing formulations for personal care products. This role requires hands-on laboratory experience, scientific curiosity, and a strong commitment to product quality and compliance. Key Responsibilities Formulate prototypes to support formula optimization and innovation initiatives Assess physical and clinical properties of formulations in alignment with project requirements Design and optimize formulas for performance, stability, and consumer appeal Select and evaluate raw materials and ingredients for efficacy and safety Conduct laboratory stability testing and monitor product performance over time Perform lab aesthetics assessments to ensure consumer-preferred sensory attributes Prepare formulas for internal and external testing, including clinical evaluations Ensure compliance with Good Manufacturing Practices (GMP) during formulation activities Qualifications Bachelor s degree in Chemistry or a related scientific discipline (required) 1 5 years of laboratory and formulation experience within consumer health, hair care, skin care or personal care industries Strong knowledge of formulation principles, raw material functionality, and product development processes Experience with stability testing, sensory evaluation, and GMP practices Excellent problem-solving skills and ability to work collaboratively in cross-functional teams Strong communication and documentation skills Preferred Attributes Experience in hair care formulation strongly preferred Familiarity with regulatory and safety requirements for consumer health products Ability to balance technical rigor with creativity in product design What We Offer Competitive compensation and benefits package Opportunity to work with a Fortune 100 organization at the forefront of consumer health innovation Collaborative, science-driven environment with career growth potential Kaztronix is an equal opportunity employer and does not discriminate on the basis of race, color, national origin, sex, age, religion, disability, veteran status or any other consideration made unlawful by federal, state or local laws. In addition, all human resource actions in such areas as compensation, employee benefits, transfers, layoffs, training and development are to be administered objectively, without regard to race, color, religion, age, sex, national origin, disability, veteran status or any other consideration made unlawful by federal, state or local laws. By applying to the position, you acknowledge that your information will be used by Kaztronix in processing your application.

Category Labs (formerly known as Monad Labs) is a team of systems engineers and researchers on a mission to design and build at the frontier of decentralized technology. We strive to design and build step-function improvements over existing blockchain solutions. After recently raising $225M in series A funding, led by Paradigm, we are growing our team. The Role We are looking for systems researchers with a strong interest in databases and operating systems. Candidates with research experience in systems verification, operating systems, multi-core algorithms, or systems architecture, are an ideal match. You will be part of a small, deeply technical team, working on high-impact problems in a fast-paced environment. Although we are building a new blockchain, previous experience with crypto is not expected. What You Will Do Designing performant algorithms and architectures related to storage or recovery, in single-node or distributed environments. Researching new architectures Tech stack: C++, clang, LLVM, gdb, perf, unix, git Who You Are PhD in Computer Science or equivalent Significant research experience into databases or operating systems Experience writing performant algorithms Experience writing production-grade code Resourceful and self-motivated Collaborative Adaptive; able to make meaningful contributions in a fast-paced environment Curious about lower-level system details Interested in building high-value, performant and distributed systems Why Work with Us Challenging problems. You'll work on extremely challenging problems with massive impact. See our Blogs and Papers & Talks for a flavor of the problems we are solving in the real world. Huge opportunity. The Ethereum Virtual Machine (EVM) standard is ubiquitous, but existing EVM-compatible chains are very slow. Monad's core innovations offer developers the best of both worlds (portability and performance) and are a game-changer for mass user adoption in crypto. The right team. You'll be part of a small, exceptional team (engineers and researchers make up 90% of the team). Culture. We're a lean team working together to achieve very ambitious goals. We are united in our culture of collaboration, low ego, and high-quality output. As an early member of our team, you'll help to shape our culture. Compensation. You'll receive a competitive salary and equity package. Resources and growth. We're well-capitalized, with backing from leading venture funds like Paradigm, Electric Capital, Greenoaks, Dragonfly, and Coinbase Ventures. We keep a lean team, and this is a rare opportunity to join. You'll learn a lot and grow as our company scales. Salary and Benefits Target full-time salary of $250,000. (**This is not a guarantee of compensation or salary; a final offer amount may vary based on factors including but not limited to experience, domain expertise, and geographic location.) Benefits for US employees include: World class benefits package (medical/dental/vision) Unlimited paid time off 401(k) retirement plan + company match Lunch and dinner stipend (in-office NYC) Monthly wellness benefit Paid parental leave

As a QC Chemist, you will be responsible for performing day-to-day laboratory activities under prescribed procedures, including qualitative and quantitative analysis, solution preparation, calibration, qualification, and maintenance of laboratory instrumentation. You will also conduct environmental monitoring, assist with technical writing, and perform administrative tasks. Additionally, you will contribute to solving problems, reviewing experimental data, writing protocols/SOPs/validation reports, and training support staff as necessary. You will monitor study procedures to ensure data accuracy and report quality while maintaining a GMP/GLP laboratory. Responsibilities * Conduct analysis in compliance with cGMP requirements, compendia standards, and internal procedures. * Maintain accurate records of analysis and perform documentation to company standards. * Prepare test solutions, volumetric solutions, and samples used in analysis. * Perform assigned sampling, physical, chemical tests and assays on raw materials, active pharmaceutical ingredients, in-process, finished bulk, finished product, and stability products analysis in an FDA regulated lab environment. * Use a variety of analytical instruments such as HPLC, GC, Dissolution, Malvern particle size analyzer, IR, Auto Titrator, UV Spectrophotometer, KF, Potentiometer, etc. * Perform analysis with a practical understanding of the test procedure and instrument operation. * Conduct laboratory investigations under the supervision of the laboratory manager. * Perform maintenance and calibrations of laboratory instruments/equipment. * Comply with all regulatory and in-house requirements including safety, housekeeping, laboratory chemical waste, cGMP, cGLP, and documentation. * Maintain the required level of training needed to perform GMP tasks. * Prepare and/or review test procedures, SOPs, and protocols as assigned. Essential Skills * Proficiency in current Good Manufacturing Practices (cGMP), FDA, and other regulatory requirements. * Experience with analytical techniques such as Dissolution, FT-IR, GC, UV-VIS, KF, TLC. * Knowledge of computer applications and programs related to laboratory applications such as HPLC, FTIR, TOC. * Familiarity with sampling methods and quality control systems. * Understanding of mathematics including statistics. * Proficiency in sample preparation techniques, spectroscopic techniques, and chromatographic systems. * Basic computer knowledge including MS Word, Excel, and Outlook. * 3-5 years of routine testing using HPLC and Dissolution. * Experience with solid oral dosage and focus on raw material, finished product. * Pharma GMP experience, laboratory, wet chemistry, titration, chromatography. Additional Skills & Qualifications * Bachelor's or master's degree in Pharmaceutical, Biological, Chemical science or related field. * 5-6 years of related laboratory work experience; minimum of 5 years as a QC Chemist in a GMP environment. * Ability to work successfully in both a team/matrix environment and independently. * Ability to work in a fast-paced environment, manage priorities and maintain timelines for multiple projects. * Ability to work safely in a chemical laboratory. * Ability to perform basic calculations, read, write, communicate, and handle stress produced by time pressure, customer demands, etc. * Must be able to access all laboratory, manufacturing, and office areas. * Must be able to wear the required PPE for entering laboratory and processing areas. * Specific vision requirements include reading written documents and using a computer. * Ability to sit or stand for prolonged periods and occasionally lift up to 25 lbs. with or without assistance. Work Environment You will be working in a laboratory setting with approximately 10 people. The laboratory is equipped with modern instrumentation and follows strict safety and regulatory protocols. The work environment requires wearing personal protective equipment (PPE) and involves standing or sitting for prolonged periods. The laboratory operates under a fast-paced and dynamic atmosphere, providing an excellent opportunity for growth and development. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cranbury,NJ. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

At Weston Solutions, Inc. you will do meaningful work and make valuable contributions. Employee ownership at Weston is a path to professional growth and access to diverse opportunities in a highly connected community that works together across key service areas to make a difference in the environment. Weston has continued to evolve and adapt to our changing world as a premier provider of environmental and infrastructure services for over sixty years. In both the public and private sectors our teams help identify, solve, mitigate, and manage critical environmental issues to help clients achieve a more sustainable future. Weston is seeking an experienced Senior Laboratory Chemist to conduct both routine and complex GC/MS analyses of organic compounds in environmental media including air, soil, water, and oil. Work will be performed in both fixed laboratory settings and mobile lab deployments, supporting a wide range of environmental investigations and emergency response efforts. This is a dynamic opportunity for a seasoned chemist to play a critical role on an emergency response team and collaborate closely with clients as technical experts. Location: Edison, NJ U.S. Citizenship Required Expected Outcomes: * Perform GC/MS analyses in mobile and fixed laboratory environments. * Conduct analysis using EPA methods such as 8260, 8270, and TO series. * Prepare standards and reagents. * Interpret mass spectral data using libraries to elucidate compound structures. * Prepare clear and concise reports based on analytical data. * Operate, maintain, calibrate, and troubleshoot laboratory instruments and equipment. * Safely manage hazardous materials in a laboratory setting. * Develop and validate methods using GC with detectors including FID, PID, and MS. * Prepare samples using techniques such as dissolution, liquid-liquid extraction, separatory funnel extraction, Soxtherm extraction, and solid phase extraction. Knowledge, Skills & Abilities: * B.S. degree in Chemistry or a closely related scientific discipline with at least 30 hours of Chemistry coursework. * Minimum 10 years of analytical chemistry experience, including 5 years of hands-on instrument operation. * Experience with Toxic Organic (TO) air methods and/or SW-846 methods for soil, water, and oil organic analyses. * General knowledge of organic chemistry fundamentals, chromatography, and mass spectrometry theory. * Familiarity with Laboratory Information Management Systems (LIMS). * Strong working knowledge of EPA analytical methods and environmental regulations. * Understanding hazardous waste characterization, storage, and labeling requirements. * Ability to travel for up to two weeks at a time, potentially up to 25% annually. * Highly organized, self-motivated, and capable of working independently with minimal supervision. Preferred Skills: * Experience with vapor intrusion sampling using summa canisters and Tedlar bags. * Ability to prepare Site-Specific Quality Assurance Project Plans and Technical Reports. * Proficiency in computer applications and ability to quickly learn new software. * Familiarity with the Incident Command System (ICS), especially ICS 100, 200, 700, and 800 courses (completion is a plus). * Proven ability to manage multiple tasks in a fast-paced environment. * Strong organizational, communication, and problem-solving skills. * Proficient in Microsoft Office applications including Outlook, Word, and Excel. * Willingness to travel for field assignments, including mobile lab deployments. * 40-Hour HAZWOPER certification. * Ability to work in PPE Levels D/C. We fully invest in our people: Weston provides a generous, comprehensive benefits package program that offers employees high value options with solid financial protection, meeting the personal needs of its people and their families. * Medical, Dental, Vision, 401K with base and matching employer stock contributions. * Paid time off includes personal, holiday and parental. * Life and disability plans. * Critical illness and accident plans. * Work/Life flexibility. * Professional development opportunities. Compensation will vary based upon experience, education, skill level, and other compensable factors.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of prep instruments/equipment May assist with validation and MDL studies. Inputs and maintains technical information as needed to support the laboratory functions/operations. Maintains Laboratory Notebook where applicable. Adheres to internal standards, policies, and procedures. Performs other duties as required. Qualifications High school diploma (Required) 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) Associates Degree in a Chemistry or similar scientific discipline (Preferred) 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) Language Skills: English (Required) Mathematical Skills: Basic (Required) Reasoning Skills/Abilities: Basic (Required) Computer Skills: Basic (Required) Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Our client is seeking Full -Time Clinical Lab Technologists for their Chemistry Lab! Full time - Alternate Weekends 11:30 pm - 8:00 am 10% night shift differential!! Perform routine and emergency tests on blood and other body fluids using a variety of automated and manual instrumentation promptly. Maintain equipment and records according to department procedures and regulatory agencies guidelines in the areas of QA and QC. Use independent judgment to solve technical and procedural problems. In some instances, the ability to stand or sit for extended periods of time is necessary. Pay Range based on experience: $82,979.96 - $103,286.06 Requirements Must have an active New York license At least 2 years of work experience preferred Bachelor's Degree in physical science, medical technology preferred. Benefits 1199 Members Medical & Dental 403B matching up to 8% of salary Room for Growth Great leadership and support, utilizing the latest advances in computer technology.

Medical Laboratory Technologist to work in the Chemistry/Core Laboratory under the direct supervision of supervisor. Will be responsible for performing a variety of complex and routine test within the Core Laboratory complying with all safety and regulatory requirement. Rotate weekends and scheduled holidays base on the needs of the department; participate in interdepartmental collaboration within the institution, to provide the highest quality patient care.

Analytical Chemist will be engaged in the different laboratory testing using a range of analytical equipment and techniques within GMP laboratory. MAJOR DUTIES/RESPONSIBILITIES: Perform assigned testing including but not limited to the physical, chemical tests per in-house written procedures and compendial monograph for the raw materials, active pharmaceutical ingredients, in-process, finished and stability products, using various wet chemistry, physical and instrumental techniques such as LC, GC, UV-Vis Spectrophotometer, dissolution, IR, Particle Size Analyzer, KF Auto titrator, Bulk Density, and other routine QC instruments. Document work clearly and perform tests accurately. Record data and results as specified in documentation procedures. Maintain proper laboratory logbooks, notebooks and other records all the time. Report and participate in the deviations and investigations. Comply with all regulatory/in-house requirements (may include but not limited to safety, housekeeping, laboratory chemical waste, cGMP, cGLP, documentation) when performing the assigned activity. · Labels, transcribes and records documentation such as report sheets and laboratory notebooks as required by Standard Operating Procedures (SOPs). · Perform laboratory related other duties as assigned. MINIMUM/PREFERRED REQUIREMENTS: Education: Bachelor's Degree in Science/Chemistry Experience: Based on the position level, must require minimum 2-10 years prior experience working in the Quality Control Laboratory in a cGMP environment, preferably in pharmaceutical industry. Hands on Empower-3 experience is plus. QC experience in Generic Pharmaceutical industries would be preferable Knowledge in Good Documentation practices. Knowledge in USP/ FDA BENEFITS: Offers a comprehensive benefits package to employees

The Associate Scientist MSAT Advanced Therapies Validation is responsible for validating supporting processes, implementing improvements within commercial manufacturing, and managing the lifecycle of these processes. The Associate Scientist acts as a Subject Matter Expert for validation studies, particularly in optimizing commercial manufacturing of lentiviral vectors, and liaises with various stakeholder departments. Responsibilities: Contribute to Life Cycle Management (LCM) and New Technology Introduction for the site. Execute validation of supporting processes (e.g.,mixing, sterilization, thermal processing, bio-decontamination). Support the introduction of new technologies and digitalization projects through validation protocol execution. Support the introduction of new materials via execution of validation protocols. Validate process parameters (e.g., process hold times). Contribute to Life Cycle Management projects. Act as Subject Matter Expert for one or more validation categories. Leverage the global MSAT network to identify and implement best practices. Author and review well-documented protocols and reports for all processes to be qualified/validated, in accordance with corporate/site guidelines, procedures, regulatory requirements, and industry best practices. Coordinate and support the execution of validation studies that conform to site standards and client guidelines, while meeting quality requirements. Support the site change control program by performing validation impact assessments and delivering the resulting implementation plan. Investigate deviations associated with process validation activities and oversee pre-validation and validation activities resulting from technical changes. Propose and formalize enhancements to qualification and validation processes and procedures to support process validation throughout the lifecycle and ensure program sustainability. Assist with writing Quality Risk Assessments for existing and new or changed processes. Ensure integration of global standards into local production processes. Support complex investigations and risk assessments. Act as SME during internal and external audits and inspections. Experience: Minimum of 2 years of relevant Manufacturing, Science, & Technology experience in the pharmaceutical industry. Experience with cell therapy manufacturing or viral vector manufacturing. GMP manufacturing and/or validation experience in pharmaceuticals. Skills in communication, planning, documentation, risk management, root cause problem-solving, and knowledge management. Understanding of regulatory requirements and industry guidelines for validation (e.g., FDA, EMA, ICH, ASTM, ISO, ISPE, PDA, etc.). Affinity with process technology and digitalization in manufacturing. Capable of successful delivery of local small projects, regional project work streams, or departmental programs under supervision. Selects applicable engineering/scientific tactics. Works independently within scope, requiring general guidance. Skills: Stem Cell Therapy Good Manufacturing Practices (GMP) Drug Manufacturing Education: BSc in Biochemistry, Biotechnology, Chemical Engineering, or a related field. Advanced degree (MSc/PhD) in Biochemistry, Biotechnology, Chemical Engineering. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Recruiter Details: Name: Azhar Email: **************************** Internal Id: 25-53773

A Few Words About Us - Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • Generic Pharma industry experience • Prefer experience in Dermatology products • Prefer R&D experience also Qualifications BS with 5-6 year experience or MS with 2-3 year experience. Additional Information Regards, Sukhpreet Basra Clinical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621I Direct:732-429-1921 (Tel) 732-549-2030*241 | (F) 732-549-5549

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions * After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of prep instruments/equipment * May assist with validation and MDL studies. * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Maintains Laboratory Notebook where applicable. * Adheres to internal standards, policies, and procedures. * Performs other duties as required. Qualifications * High school diploma (Required) * 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) * Associates Degree in a Chemistry or similar scientific discipline (Preferred) * 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Language Skills: English (Required) * Mathematical Skills: Basic (Required) * Reasoning Skills/Abilities: Basic (Required) * Computer Skills: Basic (Required) * Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

A Few Words About Us - Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description • Generic Pharma industry experience • Prefer experience in Dermatology products • Prefer R&D experience also Qualifications BS with 5-6 year experience or MS with 2-3 year experience. Additional Information Regards, Sukhpreet Basra Clinical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621I Direct:732-429-1921 (Tel) 732-549-2030*241 | (F) 732-549-5549