Production Operator jobs at Chevron - 416 jobs

The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required Final assembly of ground control equipment and air vehicles Testing and troubleshooting of subassemblies and final assemblies Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high-quality standard Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed May also train other technicians to build a product or follow an established assembly process May conduct in-process quality checks to ensure that items built are to establish high-quality standards Follows established procedures on routine work and may require instruction on new assignments Maintains a clean and safe work environment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required or equivalent combination of education, training, and experience Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required Other Qualifications & Desired Competencies Vocational training in Electronics or Solder Certification is preferred Versed in Lean Manufacturing methodologies is desired Familiarity with Safety and ESD practices is desired Ability to read blueprints and schematics is desired Ability to solder as part of assembly function and duties Must have good manual dexterity and basic computer operation skills Must have strong oral and written communication skills to communicate effectively with employees in the Company Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in a manufacturing environment Ability to frequently use hand tools (e.g. clamps) using light, minimal force Regularly required to sit for long periods and occasionally stand for short periods Frequently lift and/or carry objects of small size between 2lbs and 5lbs Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance Occasionally required to walk Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency.

The **Machine Learning Engineer II** will be a member of the Learning and Active Perception (LEAP) group in AV's MacCready Works division and support the development of a variety of innovative computer vision capabilities (object detection, classification, localization, and tracking) and other image/video analytics for defense and commercial applications. These development efforts require a range of skills and tools across traditional engineering, computer science, and mathematical disciplines including but not limited to data management, computer vision, machine learning, optimization, and deep convolutional neural networks. This position will span multiple stages of the development process including requirements gathering, algorithm design, prototyping, test and evaluation, and validation and verification testing. This specific role also involves on-site support for experimentation and fielded systems requiring a significant amount of extended travel, both domestic and international. **Duties** - Support development of computer vision and machine learning (ML) algorithms capable of object detection, classifying, localizing, and tracking objects of interest from a variety of stationary and mobile sensor platforms with the primary purpose of real-time automated target recognition (ATR) - Perform visual imagery data science to inform data collection, data labeling, and data selection for training deep computer vision ML algorithms, train the algorithms using the data, and validate data selection and algorithm design through a series of purpose-designed experiments. This includes: o Analyze ML algorithms to solve a given problem and rank them by their success probability on new data o Set objectives and develop models that help achieve them, along with metrics to track their progress o Select appropriate datasets and data representations o Analyze errors of the data, model, and design strategies to overcome them - Write and test software to support the integration of machine learning algorithms into aircraft (such as autopilots, payloads, or other functional components) or other systems - Other duties as assigned **Experience** - 2 - 5 years of relevant computer vision experience - Familiarity with Python and C/C++ required - Proficiency with a deep learning framework, preferably PyTorch - Proficiency with basic libraries for machine learning such as, Open-CV, scikit-learn, and pandas - Familiarity with Linux - Familiarity with Nvidia Tools (CUDA, JetPack, TensorRT) and deployment process to Nvidia GPUs - Demonstrated ability to troubleshoot complex systems and perform algorithmic optimization - Ability to perform exploratory data analysis, including visualizing and manipulating large datasets **Education** BS in any of the following fields: Computer Science/Engineering, Mathematics, Physics, or related Science or Engineering discipline with 2+ years of relevant experience in machine learning and/or computer vision. **Additional Requirements** - Must be a team player and collaborate effectively - Excellent verbal and written skills - Has effective problem-solving, analytical and interpersonal skills - Ability to work within defined requirements to complete tasks under moderate supervision - Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties - Displays strong initiative and drive to accomplish goals and meet company objectives - Takes ownership and responsibility for current and past work products, and demonstrates a willingness to share the results with other team members and provide feedback and input to teammates working similar problems. - Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company - Familiarity with office software and computer-based productivity tools **Physical Demands** - Ability to work in office and field environments (Constant) - Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer keyboard (Frequent) **Special Requirements** - U.S. Citizenship required - Active Secret level (or higher) DoD security clearance - Willingness and ability to travel CONUS and OCONUS (Frequent / 50%+) including extended stays up to 60 days **Clearance Level** No Clearance The salary range for this role is: $102,708 - $145,530 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

The Machine Learning Engineer II will be a member of the Learning and Active Perception (LEAP) group in AV's MacCready Works division and support the development of a variety of innovative computer vision capabilities (object detection, classification, localization, and tracking) and other image/video analytics for defense and commercial applications. These development efforts require a range of skills and tools across traditional engineering, computer science, and mathematical disciplines including but not limited to data management, computer vision, machine learning, optimization, and deep convolutional neural networks. This position will span multiple stages of the development process including requirements gathering, algorithm design, prototyping, test and evaluation, and validation and verification testing. This specific role also involves on-site support for experimentation and fielded systems requiring a significant amount of extended travel, both domestic and international. Duties * Support development of computer vision and machine learning (ML) algorithms capable of object detection, classifying, localizing, and tracking objects of interest from a variety of stationary and mobile sensor platforms with the primary purpose of real-time automated target recognition (ATR) * Perform visual imagery data science to inform data collection, data labeling, and data selection for training deep computer vision ML algorithms, train the algorithms using the data, and validate data selection and algorithm design through a series of purpose-designed experiments. This includes: o Analyze ML algorithms to solve a given problem and rank them by their success probability on new data o Set objectives and develop models that help achieve them, along with metrics to track their progress o Select appropriate datasets and data representations o Analyze errors of the data, model, and design strategies to overcome them * Write and test software to support the integration of machine learning algorithms into aircraft (such as autopilots, payloads, or other functional components) or other systems * Other duties as assigned Experience * 2 - 5 years of relevant computer vision experience * Familiarity with Python and C/C++ required * Proficiency with a deep learning framework, preferably PyTorch * Proficiency with basic libraries for machine learning such as, Open-CV, scikit-learn, and pandas * Familiarity with Linux * Familiarity with Nvidia Tools (CUDA, JetPack, TensorRT) and deployment process to Nvidia GPUs * Demonstrated ability to troubleshoot complex systems and perform algorithmic optimization * Ability to perform exploratory data analysis, including visualizing and manipulating large datasets Education BS in any of the following fields: Computer Science/Engineering, Mathematics, Physics, or related Science or Engineering discipline with 2+ years of relevant experience in machine learning and/or computer vision. Additional Requirements * Must be a team player and collaborate effectively * Excellent verbal and written skills * Has effective problem-solving, analytical and interpersonal skills * Ability to work within defined requirements to complete tasks under moderate supervision * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products, and demonstrates a willingness to share the results with other team members and provide feedback and input to teammates working similar problems. * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Familiarity with office software and computer-based productivity tools Physical Demands * Ability to work in office and field environments (Constant) * Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer keyboard (Frequent) Special Requirements * U.S. Citizenship required * Active Secret level (or higher) DoD security clearance * Willingness and ability to travel CONUS and OCONUS (Frequent / 50%+) including extended stays up to 60 days Clearance Level No Clearance The salary range for this role is: $102,708 - $145,530 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

The Machine Learning Engineer II will be a member of the Learning and Active Perception (LEAP) group in AV's MacCready Works division and support the development of a variety of innovative computer vision capabilities (object detection, classification, localization, and tracking) and other image/video analytics for defense and commercial applications. These development efforts require a range of skills and tools across traditional engineering, computer science, and mathematical disciplines including but not limited to data management, computer vision, machine learning, optimization, and deep convolutional neural networks. This position will span multiple stages of the development process including requirements gathering, algorithm design, prototyping, test and evaluation, and validation and verification testing. This specific role also involves on-site support for experimentation and fielded systems requiring a significant amount of extended travel, both domestic and international. Duties • Support development of computer vision and machine learning (ML) algorithms capable of object detection, classifying, localizing, and tracking objects of interest from a variety of stationary and mobile sensor platforms with the primary purpose of real-time automated target recognition (ATR) • Perform visual imagery data science to inform data collection, data labeling, and data selection for training deep computer vision ML algorithms, train the algorithms using the data, and validate data selection and algorithm design through a series of purpose-designed experiments. This includes: o Analyze ML algorithms to solve a given problem and rank them by their success probability on new data o Set objectives and develop models that help achieve them, along with metrics to track their progress o Select appropriate datasets and data representations o Analyze errors of the data, model, and design strategies to overcome them • Write and test software to support the integration of machine learning algorithms into aircraft (such as autopilots, payloads, or other functional components) or other systems • Other duties as assigned Experience • 2 - 5 years of relevant computer vision experience • Familiarity with Python and C/C++ required • Proficiency with a deep learning framework, preferably PyTorch • Proficiency with basic libraries for machine learning such as, Open-CV, scikit-learn, and pandas • Familiarity with Linux • Familiarity with Nvidia Tools (CUDA, JetPack, TensorRT) and deployment process to Nvidia GPUs • Demonstrated ability to troubleshoot complex systems and perform algorithmic optimization • Ability to perform exploratory data analysis, including visualizing and manipulating large datasets Education BS in any of the following fields: Computer Science/Engineering, Mathematics, Physics, or related Science or Engineering discipline with 2+ years of relevant experience in machine learning and/or computer vision. Additional Requirements • Must be a team player and collaborate effectively • Excellent verbal and written skills • Has effective problem-solving, analytical and interpersonal skills • Ability to work within defined requirements to complete tasks under moderate supervision • Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties • Displays strong initiative and drive to accomplish goals and meet company objectives • Takes ownership and responsibility for current and past work products, and demonstrates a willingness to share the results with other team members and provide feedback and input to teammates working similar problems. • Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company • Familiarity with office software and computer-based productivity tools Physical Demands • Ability to work in office and field environments (Constant) • Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer keyboard (Frequent) Special Requirements • U.S. Citizenship required • Active Secret level (or higher) DoD security clearance • Willingness and ability to travel CONUS and OCONUS (Frequent / 50%+) including extended stays up to 60 days Clearance Level No Clearance The salary range for this role is: $102,708 - $145,530 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship is required. Secret or Top Secret clearance, or the ability obtain a clearance is desired.

GEODynamics in Millsap, TX is looking for qualified candidates for Machine Operator. Our campus is on the frontage road of Interstate 20 near Millsap, TX. Located west of Fort Worth, it is an easy commute from surrounding communities of Weatherford, Stephenville, Mineral Wells and Aledo. Key Accountabilities: Follows all plant policies and practices to ensure safety, quality, service, and cost objectives are met. Performs various quality checks and assist in the cleaning and change-over of equipment. Maintains an accurate inventory through activities such as: proper reporting of material usage, minimizing waste, and ensuring that measuring devices are properly calibrated. Ensures good housekeeping of all work areas. Accurately complete all paperwork and/or data entry to support job tasks. Complies with all company policies. Qualifications, Experience, Skills/Knowledge: High School Diploma or Equivalency. 0 - 2 years of experience working in production operations, some manufacturing experience preferred. Good attention to detail Physical Requirements: Ability to safely perform related physical demands of the role Bending, lifting, stooping, and standing greater than 50% of the time Repetitive motion demands Hands/wrist/shoulder. Ability to lift up-to 60 pounds as needed. Work Environment/Environmental Conditions: Occasional exposure to hazardous chemicals, fumes, and gases Ability to work in extreme temperatures. Walking surfaces: Outdoor areas ramps and rough/uneven terrain Practices safe work habits in accordance with OSHA and GEO-specific Health and Safety expectations. An E-Verify Employer Un empleador de E-Verify

GEODynamics in Millsap, TX is looking for qualified candidates for Machine Operator. Our campus is on the frontage road of Interstate 20 near Millsap, TX. Located west of Fort Worth, it is an easy commute from surrounding communities of Weatherford, Stephenville, Mineral Wells and Aledo. Key Accountabilities: * Follows all plant policies and practices to ensure safety, quality, service, and cost objectives are met. * Performs various quality checks and assist in the cleaning and change-over of equipment. * Maintains an accurate inventory through activities such as: proper reporting of material usage, minimizing waste, and ensuring that measuring devices are properly calibrated. * Ensures good housekeeping of all work areas. * Accurately complete all paperwork and/or data entry to support job tasks. * Complies with all company policies. Qualifications, Experience, Skills/Knowledge: * High School Diploma or Equivalency. * 0 - 2 years of experience working in production operations, some manufacturing experience preferred. * Good attention to detail Physical Requirements: * Ability to safely perform related physical demands of the role * Bending, lifting, stooping, and standing greater than 50% of the time * Repetitive motion demands * Hands/wrist/shoulder. * Ability to lift up-to 60 pounds as needed. Work Environment/Environmental Conditions: * Occasional exposure to hazardous chemicals, fumes, and gases * Ability to work in extreme temperatures. * Walking surfaces: Outdoor areas ramps and rough/uneven terrain Practices safe work habits in accordance with OSHA and GEO-specific Health and Safety expectations. An E-Verify Employer Un empleador de E-Verify

GEODynamics in Millsap, TX is looking for qualified candidates for Machine Operator. Our campus is on the frontage road of Interstate 20 near Millsap, TX. Located west of Fort Worth, it is an easy commute from surrounding communities of Weatherford, Stephenville, Mineral Wells and Aledo. Key Accountabilities: * Follows all plant policies and practices to ensure safety, quality, service, and cost objectives are met. * Performs various quality checks and assist in the cleaning and change-over of equipment. * Maintains an accurate inventory through activities such as: proper reporting of material usage, minimizing waste, and ensuring that measuring devices are properly calibrated. * Ensures good housekeeping of all work areas. * Accurately complete all paperwork and/or data entry to support job tasks. * Complies with all company policies. Qualifications, Experience, Skills/Knowledge: * High School Diploma or Equivalency. * 0 - 2 years of experience working in production operations, some manufacturing experience preferred. * Good attention to detail Physical Requirements: * Ability to safely perform related physical demands of the role * Bending, lifting, stooping, and standing greater than 50% of the time * Repetitive motion demands * Hands/wrist/shoulder. * Ability to lift up-to 60 pounds as needed. Work Environment/Environmental Conditions: * Occasional exposure to hazardous chemicals, fumes, and gases * Ability to work in extreme temperatures. * Walking surfaces: Outdoor areas ramps and rough/uneven terrain Practices safe work habits in accordance with OSHA and GEO-specific Health and Safety expectations. An E-Verify Employer Un empleador de E-Verify

Company: Nextpower Job Title: Robot Operator / Service Technician Salary Range: $20-$25 per hour (depending on experience) About the Job Nextpower is at the forefront of the energy industry, revolutionizing the way solar sites are managed and optimized. Nextpower utilizes the power of AI, computer vision, and robotics to analyze and optimize solar sites. The cutting-edge technology offered by Nextpower is specifically designed to provide essential data and insights for large remote sites, without the need for additional labor costs. Nextpower's advanced robots can be used to identify hundreds of potential problems and predict future ones, enabling proactive maintenance and optimization. With Nextpower, solar sites can maximize their efficiency, reduce downtime, and increase overall profitability. To meet the growing demands of the energy industry, Nextpower is expanding its operation team. Job Description Position Overview As a Robot Operator / Service Technician at Nextpower, you will play a pivotal role in the operation and maintenance of our advanced robotic systems deployed on solar sites. You will work as part of a dynamic team that leverages cutting-edge technology to ensure the efficient operation and optimization of solar energy facilities. Key Responsibilities: ● Daily Robot Operation: Remotely operate and monitor robotic systems deployed at solar sites, ensuring missions are completed accurately and efficiently. ● Field Support and Safety Compliance: When on-site, safely operate and maintain robots in accordance with company and customer safety standards, always prioritizing risk mitigation and proper documentation. ● System Troubleshooting and Maintenance: Collaborate with the technical team to diagnose and resolve issues related to robotic performance. Assist in routine maintenance and perform basic on-site repairs as needed. ● Deployment Assistance: Support the deployment of robotic systems at new or existing solar sites, including setup, testing, and confirmation of operational readiness. ● Data Logging and Reporting: Accurately document mission performance, travel logs, anomalies, and maintenance actions using internal platforms and tools. ● Technical Communication: Clearly communicate robot status, site conditions, and technical findings to internal operations and engineering teams. ● Travel and Adaptability: Travel to solar field sites up to 60% of the time as needed for deployment, support, or repairs. Work in varied outdoor environmental conditions, sometimes for extended periods. Qualifications: ● High school diploma or equivalent (technical education or certification is a plus). ● Previous experience in robotics operation, maintenance, or related fields is preferred. ● Strong technical aptitude and problem-solving skills. ● Ability to work independently and as part of a team. ● Excellent communication skills. ● Attention to detail and a commitment to safety. ● Flexibility to work in various outdoor conditions and travel to different solar sites as needed. ● Knowledge of solar energy systems is a plus. At Nextpower, we are leading in the energy transition, providing the most comprehensive portfolio of intelligent solar tracker and software solutions for solar power plants, as well as strategic services to capture the full value of solar power plants for our customers. Our talented worldwide teams are transforming PV plant performance every day with smart technology, data monitoring and analysis services. For us at Nextpower, sustainability is not just a word. It's a core part of our business, values and our operations. Our sustainability efforts are based on five cornerstones: People, Community, Environment, Innovation, and Integrity. We are creative, collaborative and passionate problem-solvers from diverse backgrounds, driven by our shared mission to provide smart solar and software solutions for our customers and to mitigate climate change for future generations. Nextpower is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Nextpower offers a comprehensive benefits package. We provide health care coverage, dental and vision, 401(K) participation including company matching, company paid holidays with unlimited paid time off, generous discretionary company bonuses, life and disability protection and more. Employees in certain positions may be eligible for stock compensation. All plans are in accordance with relevant plan documents. For more information on Nextpower's benefits please view our company website at ****************** Pay is based on market location and may vary based on factors including experience, skills, education and other job-related reasons. At Nextpower, we are driving the global energy transition with an integrated clean energy technology platform that combines intelligent structural, electrical, and digital solutions for utility-scale power plants. Our comprehensive portfolio enables faster project delivery, higher performance, and greater reliability, helping our customers capture the full value of solar power. Our talented worldwide teams are redefining how solar power plants are designed, built, and operated every day with smart technology, data-driven insights, and advanced automation. Together, we're building the foundation for the world's next generation of clean energy infrastructure. Nextpower is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We are Nextpower

Company: Nextpower Job Title: Robot Operator / Service Technician Salary Range: $20-$25 per hour (depending on experience) About the Job Nextpower is at the forefront of the energy industry, revolutionizing the way solar sites are managed and optimized. Nextpower utilizes the power of AI, computer vision, and robotics to analyze and optimize solar sites. The cutting-edge technology offered by Nextpower is specifically designed to provide essential data and insights for large remote sites, without the need for additional labor costs. Nextpower's advanced robots can be used to identify hundreds of potential problems and predict future ones, enabling proactive maintenance and optimization. With Nextpower, solar sites can maximize their efficiency, reduce downtime, and increase overall profitability. To meet the growing demands of the energy industry, Nextpower is expanding its operation team. Job Description Position Overview As a Robot Operator / Service Technician at Nextpower, you will play a pivotal role in the operation and maintenance of our advanced robotic systems deployed on solar sites. You will work as part of a dynamic team that leverages cutting-edge technology to ensure the efficient operation and optimization of solar energy facilities. Key Responsibilities: ● Daily Robot Operation: Remotely operate and monitor robotic systems deployed at solar sites, ensuring missions are completed accurately and efficiently. ● Field Support and Safety Compliance: When on-site, safely operate and maintain robots in accordance with company and customer safety standards, always prioritizing risk mitigation and proper documentation. ● System Troubleshooting and Maintenance: Collaborate with the technical team to diagnose and resolve issues related to robotic performance. Assist in routine maintenance and perform basic on-site repairs as needed. ● Deployment Assistance: Support the deployment of robotic systems at new or existing solar sites, including setup, testing, and confirmation of operational readiness. ● Data Logging and Reporting: Accurately document mission performance, travel logs, anomalies, and maintenance actions using internal platforms and tools. ● Technical Communication: Clearly communicate robot status, site conditions, and technical findings to internal operations and engineering teams. ● Travel and Adaptability: Travel to solar field sites up to 60% of the time as needed for deployment, support, or repairs. Work in varied outdoor environmental conditions, sometimes for extended periods. Qualifications: ● High school diploma or equivalent (technical education or certification is a plus). ● Previous experience in robotics operation, maintenance, or related fields is preferred. ● Strong technical aptitude and problem-solving skills. ● Ability to work independently and as part of a team. ● Excellent communication skills. ● Attention to detail and a commitment to safety. ● Flexibility to work in various outdoor conditions and travel to different solar sites as needed. ● Knowledge of solar energy systems is a plus. At Nextpower, we are leading in the energy transition, providing the most comprehensive portfolio of intelligent solar tracker and software solutions for solar power plants, as well as strategic services to capture the full value of solar power plants for our customers. Our talented worldwide teams are transforming PV plant performance every day with smart technology, data monitoring and analysis services. For us at Nextpower, sustainability is not just a word. It's a core part of our business, values and our operations. Our sustainability efforts are based on five cornerstones: People, Community, Environment, Innovation, and Integrity. We are creative, collaborative and passionate problem-solvers from diverse backgrounds, driven by our shared mission to provide smart solar and software solutions for our customers and to mitigate climate change for future generations. Nextpower is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Nextpower offers a comprehensive benefits package. We provide health care coverage, dental and vision, 401(K) participation including company matching, company paid holidays with unlimited paid time off, generous discretionary company bonuses, life and disability protection and more. Employees in certain positions may be eligible for stock compensation. All plans are in accordance with relevant plan documents. For more information on Nextpower's benefits please view our company website at ****************** Pay is based on market location and may vary based on factors including experience, skills, education and other job-related reasons. At Nextpower, we are driving the global energy transition with an integrated clean energy technology platform that combines intelligent structural, electrical, and digital solutions for utility-scale power plants. Our comprehensive portfolio enables faster project delivery, higher performance, and greater reliability, helping our customers capture the full value of solar power. Our talented worldwide teams are redefining how solar power plants are designed, built, and operated every day with smart technology, data-driven insights, and advanced automation. Together, we're building the foundation for the world's next generation of clean energy infrastructure. Nextpower is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We are Nextpower

For over 80 years, Oil States has been a highly respected technology and solutions pioneer manufacturing diverse products for offshore platforms, subsea pipelines, defense, and general industrial applications worldwide. Oil States recognizes that our diverse workforce is our greatest asset. We offer a competitive compensation package, including paid time off as well as health insurance eligibility on the first day of employment. Paid time off includes vacation, holiday and sick time. Benefits include medical, dental, vision, 401k, life insurance, long and short-term disability, and flexible spending accounts. When we contribute to the company's success, we all win. In our organization, the Machine Operator I has a critical and challenging role in helping achieve innovation and meeting our commitments. POSITION SUMMARY: Under close supervision, prepares and operates machines to process/produce a high quality product. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Prepares machine for production by checking operating parameters and equipment for safety. * Makes certain all materials for production are available. * Loads parts into machines. * Runs parts in machines by following prescribed procedures. * Removes parts from machine after cycle is complete. * Inspects parts. * Trims and buffs parts. * Repairs defective parts. * Cleans molds and equipment. * Assembles and disassembles molds for Laminated Builders * Maintains a clean and safe work area. * Follows safe work practices and instructions, and exercises stop work authority if needed. * Perform other duties as assigned by supervisor. QUALIFICATION REQUIREMENTS: * Entry level position. * Common knowledge of a manufacturing environment preferred. * Forklift and hoist experience preferred. * Understand and follow written and verbal instructions in English. * Good verbal and written communication skills in English. * Run machines while maintaining acceptable production and quality standards. * Good problem solving skills. * Basic mathematical skills (addition/subtraction, multiplication/division, conversion of weights and measures). * Willingness to learn. * Obtain and maintain forklift certification. TOOLS AND EQUIPMENT USED (Not All Inclusive): * Press machines * Forklift * Hammer, mallet * Screw driver, rachet, socket, wrench, allen wrench, plyers * Impact (electric) * Clamps * Dolly/Cart * Electric drill * Buffer * Air hose * Crane * Xacto knife, blade, Scissors, Trimmers (hand held manual) PHYSICAL REQUIREMENTS * Prolonged standing and/or sitting. * Frequent bending, reaching, pushing, pulling and stooping. * Press operators lift, push, pull and carry in excess of 50 pounds without assistance. * Sand Blaster operators lift, push, pull and carry in excess of 20 pounds without assistance. * Deflasher operators lift, push, pull and carry in excess of 20 pounds without assistance. * Arc spray operators lift, push, pull and carry in excess of 40 pounds without assistance. * May lift, push, pull and carry heavier weight with assistance. * Work in extreme heat in the summer and extreme cold in the winter. CITIZENSHIP REQUIREMENTS - By contractual requirements this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify

**Role Synopsis** We are seeking a highly motivated, mechanically inclined Production Technician with a growth mindset who enjoys a dynamic, hands on, field-based work environment. You will be responsible for working in the Eagle Ford Basin with other teams to install new infrastructure (well, equipment, facilities), perform repairs, perform preventative maintenance on existing equipment, diagnose issues, conduct root cause failure analysis, pre and post job reviews, handle contractor work, collect data / validate conditions, and investigate customer/3rd party issues. **Key Accountabilities** + Ability to communicate clearly and effectively with remote staff on problems that may be encountered using phone, video or virtual assist technology + Analytical prowess to leverage data and available resources to resolve key issues that arise every single day in the field. + Gain full cycle understanding of oil and gas operating systems from reservoir to sales line. + Actively schedule activities and make yourself available to assist others and build partnerships. + Seek out opportunities to increase capability and capacity and assist in identifying training gaps within the team. + Actively participate as a member of business unit to improve team processes and build interdependent team culture. + Proven ability to learn or conduct basic failure analysis, nodal analysis + Validated problem-solving ability used in similar settings with impactful results to the business. + Experience using data to drive decision-making + High level of aptitude and interest with new technology **Essential Experience** + Experience in oil and gas or other manufacturing/industrial business + Understanding of oil and gas industry + Electro-mechanical background with experience working in lean processes environment + Conscious of desired vs. non-desired outcomes and willingness to affect change + Growth mindset: Proven ability to learn and adapt quickly + Extraordinary listening and social skills along with upbeat, naturally inquisitive, and confidence-instilling approach both remotely and in person. + Close out estimates, complete post-construction checks, complete as-builts and review contractor invoices + Adaptable to changes in the work environment, handling challenging demands, and taking care of frequent changes, delays or unexpected events + Understanding of databases, data architecture, and technologies used to transform and transport data **Working Conditions:** Lifting Abilities: + Lift with 2 hands from floor to knuckles: 80 lbs x 2 (with 12 sec rest intervals between lifts) + Lift with 2 hands from floor to waist: 80 lbs x 2 (with 12 sec rest intervals between lifts) + Lift with 2 hands from floor to shoulders: 35 lbs x 2 (with 12 sec rest intervals between lifts) + Lift with 2 hands from floor to crown: 15 lbs x 2 (with 12 sec rest intervals between lifts) Pushing and Pulling Abilities: + Push horizontally with hands placed between waist and mid-chest level to generate a peak force of 80 lbs with two hands x 3 + Pull horizontally with hands placed between waist and mid-chest level to generate a peak force of 80 lbs with two hands x 3 Carrying Abilities: + Carry with 2 hands at self-selected height: 80 lbs for a distance of 5 feet x 2; self-paced. Stair / Ladder Climbing Abilities: + Stair Climb: Climb up and down a total of 10 steps, self-paced. Agilities: + Stooping and Twisting: From standing, perform alternate toe touches x 3 to each side, self-paced but continuous. + Test recipient should reach toward his/her toes on opposite side as far as possible but actual touching of toes not required. + Kneeling: From standing, kneel on one knee, return to full standing and then kneel on opposite knee. Repeat kneeling test x 3, each knee, self-paced but continuous. + Sustained Squatting: From standing, lower body into a functional squat position. Hold the squat position for 30 seconds and then stand. + Repetitive Squatting: Repeat squats x 3 reps, self-paced, no hold time at end range. **Location:** Victoria, TX **Schedule:** 7/7 night shift How much do we pay (Base) $85,000-$100,000. Note that the pay range listed for this position is a good faith and reasonable estimate of the range of possible base compensation at the time of posting. **Why join us?** At bpx, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. We offer a reward and wellbeing package to enable your work to fit with your life. These can include, but not limited to, access to health, vision, and dental insurance, flexible working schedule, paid time off policy, discretionary annual bonus program, long-term incentive program, and a generous 401(k) matching program. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations. Discover your place with us and help our business meet the challenges of reimagining and reinventing the future of energy. **Travel Requirement** Some travel may be required with this role, this is negotiable **Relocation Assistance:** This role is not eligible for relocation **Remote Type:** This position is not available for remote working **Skills:** Adaptability, Analytical Thinking, Coaching, Collaboration, Communication, Conflict Management, Control of Work, Control Room Operations, Cost-conscious decision-making, Crisis and emergency response management, Curiosity, Environment, Field Operations, Influencing, Knowledge Sharing, Listening, Plant preparation and reinstatement, Process safety hazard recognition, Production optimisation, Resilience, Self-Awareness, Working with contractors, Work Management **Legal Disclaimer:** We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us . If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

TETRA Technologies, Inc. is a global organization whose foundation and strength comes from the drive and dedication of our team members. We value equal employment opportunity to stimulate creativity and innovation in our workforce as we use our collective talents to develop unique solutions to address the world's energy challenges. Founded in 1981, TETRA (NYSE: TTI) is an energy services and solutions company focused on developing environmentally conscious services and solutions that help make people's lives better. With operations on six continents, the Company's portfolio consists of Energy Services, Industrial Chemicals, and Critical Minerals. In addition to providing products and services to the oil and gas industry and calcium chloride for diverse applications, TETRA is expanding into the low-carbon energy market with chemistry expertise, key mineral acreage, and global infrastructure, helping to meet the demand for sustainable energy in the twenty-first century. Visit the Company's website at www.onetetra.com for more information or connect with us on LinkedIn. Essential Duties and Responsibilities: Responsible for the safety of all personnel working on the job site and the safety of the environment. Conducts safety briefings. Observes safe work practices in the performance of job duties, including the use of proper personal protective equipment at all times. Inspects all equipment to ensure it is in safe working condition. Maintains records of inspections, as required. Assist with the repair or removal of equipment from service in unsafe working conditions. Performs in the optimum and safe performance of their duties and the proper care and maintenance of the equipment. Monitors all instrumentation. Able to troubleshoot segregators, GPUs, and other testing equipment. Maintains and accurately prepares all reports and logs delegated to this position. Assist in the investigation and documentation of any near-misses or work-related injuries. Provides first aid treatment, if necessary. Requirements: EDUCATION: High School Diploma or General Education Certification (GED) EXPERIENCE: All levels of experience LICENSES/CERTIFICATIONS: Valid Driver's License OTHER: Must have knowledge of all typical flowback activities including Frac, Drillout, and Production operations Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Submit to and satisfactorily complete pre-employment background, medical, alcohol, and drug screening Must possess a valid Driver's License Able and willing to work a rotating shift schedule that includes nights, weekends, holidays, and occasional overtime (if applicable) Able and willing to work in inclement weather, climb structures, perform work at heights, and in enclosed spaces Able and willing to work both independently in remote locations and in a team environment Physical Duties: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, see, talk, and hear. The employee is frequently required to walk and to use their hands to use, handle and control equipment. The employee is occasionally required to reach, climb, and balance. The employee must regularly lift and/or move up to 25-50 pounds and occasionally lift and/or move up to 100 pounds with appropriate assistance. Work Environment: The requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. While performing the duties of any field-based position, an employee may be exposed to various outside weather conditions including but not limited to rain, humidity, snow, and/or heat during daytime hours and/or nighttime hours. The noise level in this work environment is usually moderate to loud for extended periods of time.

The Test Tank Operator tests the readiness of equipment, ensures conformity to company standards, and operates equipment in high-pressure areas while adhering to strict work safety procedures. Detailed Description: • Operates and controls pressurized systems, testing functionality of all field equipment. • Diagnoses and assesses service issues, documenting and noting required repairs. • Supports maintenance staff with operational assistance as needed. • Ensures equipment quality through preventative maintenance and adherence to company standard operating procedures. • Documents all work performed within the CMMS. • Performs final inspections of equipment to monitor safety and efficiency. • Verifies equipment is road-ready. • Performs all other duties as assigned. Job Requirements: Required Knowledge, Skills, and Abilities: • Demonstrates professionalism, integrity, ethical behavior, and commitment to company values. • Maintains composure in highly stressful or adverse situations. • Learns and integrates new technical skills quickly; maintains current knowledge in field of expertise. • Safety-oriented and able to analyze problems systematically, considering alternatives and rejecting unacceptable options. • Provides tactful, direct, and actionable feedback; constructively confronts people problems and stressful situations. Language Comprehension: Must understand and speak English at a proficiency level sufficient to issue, receive, and respond to safety- and operations-related directions. Minimum Qualifications: • Education: High School Diploma or equivalent. • Experience: 2-4 years FRAC experience. Additional Details: This role requires attention to detail, adherence to safety protocols, and the ability to operate and inspect pressurized equipment reliably. The Test Tank Operator plays a critical part in ensuring equipment readiness, operational efficiency, and safety compliance.

The ideal candidate for this position is responsible for operating a machine to test pressure validity and electronic functionality. Document pass/fain in spreadsheet and notate errors for rework. Move modules from crate/container to testing machine. Move crates/containers of modules in different areas for rework/testing or shipment. Duties/Responsibilities: Reading plans, specifications, or instructions to find out the tasks to complete. Ensuring that your place of work is safe and tidy. Handle of sensitive electronic components. Load parts onto our in-house test equipment / machines and follow work instructions. Data entry of test results. Work in an ESD (Electrostatic Discharge) environment. Working on an assembly line to inspect, clean, and/or package products. Ability to operate machines. Housekeeping: Janitorial work in assigned workspace daily. Working in a steady paced environment to ensure production goals are met. Overtime as needed (weekends and/or nights.) Qualifications Prior experience in electronics manufacturing is a plus but not required. One to two years of experience working in a manufacturing test environment is required. Must be able to communicate in English, including high comfort level giving and receiving instructions In English -written and verbal instructions is required. Must be able to read schematics (required). Must be comfortable wearing ESD gear. Ability to work independently and follow instructions. Familiar with Microsoft Excel. Education/Experience requirements: High school diploma Excel experience (Beginner to Intermediate level). Able to communicate in the English language. (Written & verbally) Physical Requirements: May be standing, sitting, bending up to 12 hours Equal Opportunity Message: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be eligible to work in the US permanently without sponsorship. At Geospace our employees enjoy benefits to support their physical, financial, and emotional wellness. These benefits include: • Comprehensive medical, dental and vision plans • 401(k) with a percentage match • Supplemental insurance options • Paid time-off program with paid holidays • Paid volunteer hours, and charitable giving matches

The Test Tank Operator tests the readiness of equipment, ensures conformity to company standards, and operates equipment in high-pressure areas while adhering to strict work safety procedures. Detailed Description: * Operates and controls pressurized systems, testing functionality of all field equipment. * Diagnoses and assesses service issues, documenting and noting required repairs. * Supports maintenance staff with operational assistance as needed. * Ensures equipment quality through preventative maintenance and adherence to company standard operating procedures. * Documents all work performed within the CMMS. * Performs final inspections of equipment to monitor safety and efficiency. * Verifies equipment is road-ready. * Performs all other duties as assigned. Job Requirements: Required Knowledge, Skills, and Abilities: * Demonstrates professionalism, integrity, ethical behavior, and commitment to company values. * Maintains composure in highly stressful or adverse situations. * Learns and integrates new technical skills quickly; maintains current knowledge in field of expertise. * Safety-oriented and able to analyze problems systematically, considering alternatives and rejecting unacceptable options. * Provides tactful, direct, and actionable feedback; constructively confronts people problems and stressful situations. Language Comprehension: Must understand and speak English at a proficiency level sufficient to issue, receive, and respond to safety- and operations-related directions. Minimum Qualifications: * Education: High School Diploma or equivalent. * Experience: 2-4 years FRAC experience. Additional Details: This role requires attention to detail, adherence to safety protocols, and the ability to operate and inspect pressurized equipment reliably. The Test Tank Operator plays a critical part in ensuring equipment readiness, operational efficiency, and safety compliance.

TETRA Technologies, Inc. is a global organization whose foundation and strength comes from the drive and dedication of our team members. We value equal employment opportunity to stimulate creativity and innovation in our workforce as we use our collective talents to develop unique solutions to address the world's energy challenges. Founded in 1981, TETRA (NYSE: TTI) is an energy services and solutions company focused on developing environmentally conscious services and solutions that help make people's lives better. With operations on six continents, the Company's portfolio consists of Energy Services, Industrial Chemicals, and Critical Minerals. In addition to providing products and services to the oil and gas industry and calcium chloride for diverse applications, TETRA is expanding into the low-carbon energy market with chemistry expertise, key mineral acreage, and global infrastructure, helping to meet the demand for sustainable energy in the twenty-first century. Visit the Company's website at www.onetetra.com for more information or connect with us on LinkedIn. Essential Duties and Responsibilities: Responsible for the safety of all personnel working on the job site and the safety of the environment. Conducts safety briefings. Observes safe work practices in the performance of job duties, including the use of proper personal protective equipment at all times. Inspects all equipment to ensure it is in safe working condition. Maintains records of inspections, as required. Assist with the repair or removal of equipment from service in unsafe working conditions. Performs in the optimum and safe performance of their duties and the proper care and maintenance of the equipment. Monitors all instrumentation. Able to troubleshoot segregators, GPUs, and other testing equipment. Maintains and accurately prepares all reports and logs delegated to this position. Assist in the investigation and documentation of any near-misses or work-related injuries. Provides first aid treatment, if necessary. Requirements: EDUCATION: High School Diploma or General Education Certification (GED) EXPERIENCE: All levels of experience LICENSES/CERTIFICATIONS: Valid Driver's License OTHER: Must have knowledge of all typical flowback activities including Frac, Drillout, and Production operations Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Submit to and satisfactorily complete pre-employment background, medical, alcohol, and drug screening Must possess a valid Driver's License Able and willing to work a rotating shift schedule that includes nights, weekends, holidays, and occasional overtime (if applicable) Able and willing to work in inclement weather, climb structures, perform work at heights, and in enclosed spaces Able and willing to work both independently in remote locations and in a team environment Physical Duties: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, see, talk, and hear. The employee is frequently required to walk and to use their hands to use, handle and control equipment. The employee is occasionally required to reach, climb, and balance. The employee must regularly lift and/or move up to 25-50 pounds and occasionally lift and/or move up to 100 pounds with appropriate assistance. Work Environment: The requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. While performing the duties of any field-based position, an employee may be exposed to various outside weather conditions including but not limited to rain, humidity, snow, and/or heat during daytime hours and/or nighttime hours. The noise level in this work environment is usually moderate to loud for extended periods of time.

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Department: Operations CCFT BIO: Cummins Clean Fuel Technologies designs and manufactures compressed natural gas (CNG) fuel systems for the heavy-duty truck market. CCFT is a leader in the fast-growing CNG fueled industry with the highest quality and technologically advanced fuel systems on the market today. Our customers come from all facets of the HD market from refuse services to long haul applications with many of our systems custom designed to serve a customer need. The high-quality product work behind the scenes with Cummins natural gas powertrain systems to enhance the driver experience with a clean sheet designed, tested, and manufactured system to help thousands of businesses and individuals across the country keep the wheels rolling with a cost-effective, clean, and sustainable alternative to traditional diesel-fueled applications. We are looking for the best and brightest to join us in this fast-paced and fast-growing industry! POSITION SUMMARY: The production technician will be responsible for efficiently operating specialty CNC manufacturing equipment in a production setting. The technician will be responsible for maintaining quality products and interacting with the operations and engineering teams to improve processes to maximize production volumes and minimize scrapped production due to in-process defects. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct setups and load materials in order to perform production operations Monitor production processes and adjust machine settings as needed to ensure consistent quality and efficient production rates Conduct quality checks and inspections to ensure that products meet specifications, using measuring instruments and visual inspection techniques. Record production data, such as quantities produced, materials used, and production times Perform routine maintenance and repairs on equipment, including cleaning, lubricating, and replacing worn parts Follow safety procedures and wear appropriate protective equipment, including gloves, safety glasses, and respirators Collaborate with other production staff to troubleshoot problems and improve production processes Follow standard operating procedures and work instructions to ensure consistent and high-quality production Adhere to all safety protocols and regulations, including wearing appropriate personal protective equipment Assist with other production-related tasks as needed. EDUCATION/EXPERIENCE REQUIREMENTS: High school diploma or equivalent; technical degree or certification in machining or manufacturing is preferred Experience operating machinery in a manufacturing production setting Ability to read and interpret technical drawings and specifications. High attention to detail Strong attention to detail and quality control skills Keep work area clean and organized and maintain equipment in good working condition. Follow standard operating procedures and work instructions to ensure consistent and high-quality production Ability to work independently and as part of a team in a fast-paced environment. Ability to work flexible hours as needed to meet production schedules. Must be willing to travel. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to write reports, business correspondence and procedure manuals. Ability to communicate complex concepts effectively with all levels of the organization in both verbal and written forms. U.S. Passport Holder or capable of attaining within 60 days of hire This role works with epoxies and resins in a day to day environment. anyone with a epoxy resin allergy is at risk in this environment. For this reason, successful passing of an epoxy resin allergy patch test is needed. If you have an allergy to epoxy resin, our team can discuss alternative opportunities for other roles, pending qualifications. ADDITIONAL SKILLS AND ABILITIES ARE A PLUS: Assembly/fabrication equipment operation (2+ years) Industrial CNC equipment programming (2+ years) Familiarity with CAD/CAM software and CNC (2+ years) PLC and HMI diagnostic/repair experience (2+ years) Six sigma/lean methodologies Strong problem solving and analytical skills. Experience in fiberglass repair CERTIFICATIONS/LISCENCES: Must obtain and maintain the applicable employee license with the Texas Railroad Commission; must pass test within 45 days of hire. Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier. PHYSICAL DEMANDS: This role requires the operator to perform the following: Stand for long periods of time. Ability to lift and move heavy equipment and parts up to 50 lbs. Perform repetitive motions with the hands/wrists/arms. Bending, twisting, and reaching to access the materials and machine components. Pushing or pulling heavy carts or dollies. Occasional climbing, balancing, and stooping to perform maintenance or adjustments to equipment. WORK ENVIRONMENT: This role will require willingness to work in an environment: noisy and dusty environment exposure to chemicals and other hazardous materials. The work area may occur in non-air-conditioned facilities. This role works with epoxies and resins in a day to day environment. anyone with a epoxy resin allergy is at risk in this environment. For this reason, successful passing of an epoxy resin allergy patch test is needed. If you have an allergy to epoxy resin, our team can discuss alternative opportunities for other roles, pending qualifications. Cummins Clean Fuel Technologies is an equal opportunity employer.

Department: Operations CCFT BIO: Cummins Clean Fuel Technologies designs and manufactures compressed natural gas (CNG) fuel systems for the heavy-duty truck market. CCFT is a leader in the fast-growing CNG fueled industry with the highest quality and technologically advanced fuel systems on the market today. Our customers come from all facets of the HD market from refuse services to long haul applications with many of our systems custom designed to serve a customer need. The high-quality product work behind the scenes with Cummins natural gas powertrain systems to enhance the driver experience with a clean sheet designed, tested, and manufactured system to help thousands of businesses and individuals across the country keep the wheels rolling with a cost-effective, clean, and sustainable alternative to traditional diesel-fueled applications. We are looking for the best and brightest to join us in this fast-paced and fast-growing industry! POSITION SUMMARY: The production technician will be responsible for efficiently operating specialty CNC manufacturing equipment in a production setting, transporting materials in process and performing assembly processes. The technician will be responsible for maintaining quality products and interacting with the operations and engineering teams to improve processes to maximize production volumes and minimize scrapped production due to in-process defects. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct setups and load materials to perform production operations. Monitor production processes and adjust machine settings as needed to ensure consistent quality and efficient production rates. Inspect and measure machined parts to ensure they meet design specifications and quality standards. Use precision tools and equipment, such as micrometers, calipers, and gauges, to measure and verify dimensions. Follow standard operating procedures and work instructions to ensure consistent and high-quality production. Keep work area clean and organized and maintain equipment in good working condition. Adhere to all safety protocols and regulations, including wearing appropriate personal protective equipment. Assist with other production-related tasks as needed. EDUCATION/EXPERIENCE: High school diploma or equivalent; technical degree or certification in machining or manufacturing is preferred Strong attention to detail and quality control skills Experienced in production assembly operations Ability to read and interpret technical drawings and specifications Experience with manual machining equipment, including lathes, milling machines, and drill presses Ability to work independently and as part of a team in a fast-paced environment. Must be willing to travel. Ability to work flexible hours as needed to meet production schedules. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to write reports, business correspondence and procedure manuals. Ability to communicate complex concepts effectively with all levels of the organization in both verbal and written forms. U.S. Passport Holder or capable of attaining within 60 days of hire This role works with epoxies and resins in a day to day environment. anyone with a epoxy resin allergy is at risk in this environment. For this reason, successful passing of an epoxy resin allergy patch test is needed. If you have an allergy to epoxy resin, our team can discuss alternative opportunities for other roles, pending qualifications. ADDITIONAL SKILLS AND ABILITIES ARE A PLUS: Assembly/fabrication equipment operation (2+ years) Industrial CNC equipment programming (2+ years) Six sigma/lean methodologies Experience in plastics industry (2+ years) Experience in fiberglass repair industry (2+ years) Strong problem solving and analytical skills. PLC and HMI diagnostic/repair experience is a plus (2+ year). CERTIFICATIONS/LISCENCES: Must obtain and maintain the applicable employee license with the Texas Railroad Commission; must pass test within 45 days of hire. Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier. PHYSICAL DEMANDS: This role requires the operator to perform the following: Stand for long periods of time. Ability to lift and move heavy equipment and parts up to 50 lbs. Perform repetitive motions with the hands/wrists/arms. Bending, twisting, and reaching to access the materials and machine components. Pushing or pulling heavy carts or dollies. Occasional climbing, balancing, and stooping to perform maintenance or adjustments to equipment. WORK ENVIRONMENT: This role will require willingness to work in an environment: noisy and dusty environment exposure to chemicals and other hazardous materials. The work area may occur in non-air-conditioned facilities. This role works with epoxies and resins in a day to day environment. anyone with a epoxy resin allergy is at risk in this environment. For this reason, successful passing of an epoxy resin allergy patch test is needed. If you have an allergy to epoxy resin, our team can discuss alternative opportunities for other roles, pending qualifications. Cummins Clean Fuel Technologies is an equal opportunity employer.