Process Technician jobs at Church & Dwight Co. - 1574 jobs

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

ParkDecoratorsfabricatedecorationsandsetsfortheKnott'sBerryFarmresort,Knott's Berry Farm Hotel and Soak City For the various seasonal events throughout the year.As well as decorate restaurants, rides and merchandise locations on the resort. Park Decorator roles may include and is not limited to one of the following positions: Window Display Designer/Installer, Floral Design, Scenic Painting, or Seasonal Holiday Decorator. Salary Details: $26.86 / hr Responsibilities: Daily inspection and Maintenance of Permanent installations of theresort. Daily inspection of Current seasonal dcor installed in theresort. Fabricate new dcor for seasonal events. Refurbish existing dcor for seasonal events. Inventory andmaintainshop. Install dcor for seasonal events. Strike dcor for seasonal events. Qualifications: High school diploma / GED required. Associate's degree / vocational or technical school degree, emphasis in Theatrical Design/visual Display preferred. At least 1-2 years of prior, relevant work experiencepreferred. User of basic hand toolsand power tools,gluesand adhesives.Floral design helpful.Ability to sketch and convey design concepts. Basic Scenic painting skills preferred. Must be able to work nights, weekends, and holiday based on business needs.

Avo Photonics is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications. We seek a diligent, dedicated and meticulous person who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must plan his/her own work schedule, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects. This role may be suitable for a junior or senior engineer. Specific: Develop high yield, cost efficient, manufacturable processes as appropriate for target production volumes Act as end-to-end owner of key equipment such as die bonders, wire bonders, seam sealers, laser welders, etc Provide subject matter expertise for process development on equipment you own. Understand tool capability, process viability, and material selection Own maintenance, upgrade, and repair of equipment you own. Ensure minimal production downtime through regular preventative maintenance. Understand the function of the tools inside and out, in order to resolve issues as quickly as possible Provide data-based evidence that developed processes meet product requirements through design of experiments and statistical process control (within material availability) Generate documentation of the process development lifecycle for each project; contribute to business knowledge repositories for fixtures, materials, and process parameters Create work instructions and provide training on resultant processes to Product Engineering and Manufacturing personnel Guide the design of fixtures required to assemble products Recommend and implement new equipment and techniques to improve process capabilities Requirements: B.S. in Physics, Material Science, or relevant Engineering field 5 years experience with precision optical alignments or programming automated manufacturing equipment 5 years of experience in design of experiments and statistical process control. 3 years of manufacturing experience Proficiency with software-based logic, such as programming, Matlab, etc. Excellent communication skills and willingness to learn Avo Photonics offers competitive salaries and a comprehensive benefits package. Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* I LinkedIn I Glassdoor I Facebook I YouTube Job Description Responsibilities: Troubleshoot machine issues, minor hydraulic and electrical problems Ability to discern molding issues from machinery or process issues Record accurate production data necessary for tracking purposes Develop corrective actions for machine/molding issues Track downtime, quality performance and machine efficiency Train personnel to improve technical capabilities and experience Evaluate the quality of product form newly set-up machines Monitor production process Respond to reported machine/mold issues Start-up and shut-down molding machines as necessary Follow mold change procedures Perform mold changes and color changes in a proficient manner Communicate all changes and all important information to the Manager or Supervisor Ensure all system performances are optimized and running safely. Work with/relieve assembly line operators as needed to meet production requirements Follow and enforce all Environment, Health and Safety, ISO, Food Safety and cGMP policies and procedures Qualifications: Problem Solving - Identify and resolve problems in a timely manner; Gather and analyze information skillfully. Written Communication - Able to read and interpret written information. Teamwork - Contribute to building a positive team spirit. Judgement - Exhibits sound and accurate judgment; Supports and explain reasoning for decisions; Include appropriate people in decision-making process. Planning/Organizing - Uses time efficiently. Professionalism - Approach others in a tactful manner; Reacts well under pressure; Treat others with respect and consideration regardless of their status or position; Accept responsibility for own actions; Follows through on commitments. Quality - Demonstrate accuracy and thoroughness; Look for ways to improve and promote quality; Apply feedback to improve performance; Monitor own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Determine appropriate action beyond guidelines; Report potentially unsafe conditions; Use equipment and materials properly. Be safety and quality conscience at all times Adaptability - Adapt to changes in the work environment; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Completes tasks on time or notifies appropriate person with an alternate plan. Innovation - Generates suggestions for improving work. Must be familiar with operation and set-up of Injection Molding machines, robots, manufacturing software and processing systems Be mechanically and electrically inclined 12 hour Day shift 2 weeks vacation in the first year Great Pay up to $38.00/hr, based on experience and skill level Incentive Bonuses $40/wk Perfect Attendance Bonus Referral Bonus Great Benefit Package Company paid life insurance 401(k) retirement plan with a company match Educational reimbursement Our Expectations We expect our people to be guided by The Amcor Way and demonstrate our Values every day to enable the business to win. We are winning when: Our people are engaged and developing as part of a high-performing Amcor team Our customers grow and prosper from Amcor's quality, service, and innovation Our investors benefit from Amcor's consistent growth and superior returns The environment is better off because of Amcor's leadership and products Equal Opportunity Employer/Minorities/Females/Disabled/Veterans/Sexual Orientation/Gender Identity Amcor is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you would like more information about your EEO rights as an applicant under the law, please click on the "Know Your Rights: Workplace Discrimination is Illegal" Poster . If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call ************ and let us know the nature of your request and your contact information. E-Verify We verify the identity and employment authorization of individuals hired for employment in the United States. Benefits When you join Amcor, you will have access to a comprehensive benefits and compensation package that includes: Medical, dental and vision plans Paid time off, starting at 40 hours per year for full-time hourly employees, may vary by location Company-paid holidays starting at 8 days per year and may vary by location Wellbeing programs & Employee Assistance Program Health Savings Account/Flexible Spending Account Life insurance, AD&D, short-term & long-term disability, and voluntary benefits Paid Parental Leave Retirement Savings Plan with company match Tuition Reimbursement (dependent upon approval) Discretionary bonus program (initial eligibility dependent upon hire date)

**Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world.** At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* I LinkedIn I Glassdoor I Facebook I YouTube **Job Description** **Responsibilities:** + Troubleshoot machine issues, minor hydraulic and electrical problems + Ability to discern molding issues from machinery or process issues + Record accurate production data necessary for tracking purposes + Develop corrective actions for machine/molding issues + Track downtime, quality performance and machine efficiency + Train personnel to improve technical capabilities and experience + Evaluate the quality of product form newly set-up machines + Monitor production process + Respond to reported machine/mold issues + Start-up and shut-down molding machines as necessary + Follow mold change procedures + Perform mold changes and color changes in a proficient manner + Communicate all changes and all important information to the Manager or Supervisor + Ensure all system performances are optimized and running safely. + Work with/relieve assembly line operators as needed to meet production requirements + Follow and enforce all Environment, Health and Safety, ISO, Food Safety and cGMP policies and procedures **Qualifications:** + Problem Solving - Identify and resolve problems in a timely manner; Gather and analyze information skillfully. + Written Communication - Able to read and interpret written information. + Teamwork - Contribute to building a positive team spirit. + Judgement - Exhibits sound and accurate judgment; Supports and explain reasoning for decisions; Include appropriate people in decision-making process. + Planning/Organizing - Uses time efficiently. + Professionalism - Approach others in a tactful manner; Reacts well under pressure; Treat others with respect and consideration regardless of their status or position; Accept responsibility for own actions; Follows through on commitments. + Quality - Demonstrate accuracy and thoroughness; Look for ways to improve and promote quality; Apply feedback to improve performance; Monitor own work to ensure quality. + Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. + Safety and Security - Observes safety and security procedures; Determine appropriate action beyond guidelines; Report potentially unsafe conditions; Use equipment and materials properly. Be safety and quality conscience at all times + Adaptability - Adapt to changes in the work environment; Able to deal with frequent change, delays, or unexpected events. + Attendance/Punctuality - Is consistently at work and on time. + Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Completes tasks on time or notifies appropriate person with an alternate plan. + Innovation - Generates suggestions for improving work. + Must be familiar with operation and set-up of Injection Molding machines, robots, manufacturing software and processing systems + Be mechanically and electrically inclined **12 hour Day shift** + 2 weeks vacation in the first year + Great Pay up to $38.00/hr, based on experience and skill level + Incentive Bonuses + $40/wk Perfect Attendance Bonus + Referral Bonus + Great Benefit Package + Company paid life insurance + 401(k) retirement plan with a company match + Educational reimbursement **Our Expectations** We expect our people to be guided by The Amcor Way and demonstrate our Values every day to enable the business to win. We are winning when: + Our people are engaged and developing as part of a high-performing Amcor team + Our customers grow and prosper from Amcor's quality, service, and innovation + Our investors benefit from Amcor's consistent growth and superior returns + The environment is better off because of Amcor's leadership and products **Equal Opportunity** **Employer/Minorities/Females/Disabled/Veterans/Sexual** **Orientation/Gender Identity** Amcor is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you would like more information about your EEO rights as an applicant under the law, please click on the _"Know Your Rights: Workplace Discrimination is Illegal" Poster_ . If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call ************ and let us know the nature of your request and your contact information. **E-Verify** We verify the identity and employment authorization of individuals hired for employment in the United States. **Benefits** When you join Amcor, you will have access to a comprehensive benefits and compensation package that includes: + Medical, dental and vision plans + Paid time off, starting at 40 hours per year for full-time hourly employees, may vary by location + Company-paid holidays starting at 8 days per year and may vary by location + Wellbeing programs & Employee Assistance Program + Health Savings Account/Flexible Spending Account + Life insurance, AD&D, short-term & long-term disability, and voluntary benefits + Paid Parental Leave + Retirement Savings Plan with company match + Tuition Reimbursement (dependent upon approval) + Discretionary bonus program (initial eligibility dependent upon hire date) **About Amcor** Amcor is the global leader in developing and producing responsible consumer packaging and dispensing solutions across a variety of materials for nutrition, health, beauty and wellness categories. Our global product innovation and sustainability expertise enables us to solve packaging challenges around the world every day, producing a range of flexible packaging, rigid packaging, cartons and closures that are more sustainable, functional and appealing for our customers and their consumers. We are guided by our purpose of elevating customers, shaping lives and protecting the future. Supported by a commitment to safety, over 75,000 people generate $23 billion in annualized sales from operations that span over 400 locations in more than 40 countries. NYSE: AMCR; ASX: AMC ************* | LinkedIn | YouTube Amcor is committed to providing a secure and reliable experience for all job seekers. If you are looking to join Amcor, please read this page to help you avoid recruitment scams. Click here!

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Plant Quality TechnicianResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$23.52 - $31.16 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Employment Type: Full Time Segment: Danfoss Power Solutions Segment Job Category: Supply Chain and Operations **The Impact You'll Make** A Production Operations Technician encompasses the job functions required to coordinate parts, assemble, test, paint, package, and ship company products. The POT performs a variety of manufacturing tasks that generally include assembling, operating equipment, setting up machines, testing, and dismantling unit assemblies and complex subassembly workstations according to standard work instructions. This is a 2rd Shift position, with work hours from Monday through Friday, 2:00 pm to 10:00 pm. **What You'll Be Doing** Monitor production lines and equipment to ensure optimal performance and identify any issues or malfunctions. Troubleshoot and resolve equipment and machinery problems to minimize downtime and maintain production efficiency. Conduct routine maintenance tasks, including cleaning, lubricating, and adjusting machinery to ensure proper operation. Collaborate with the engineering team to implement process improvements and optimize production workflows. Perform quality control inspections to ensure products meet company standards and customer specifications. Document and report any production issues, equipment failures, or quality concerns to the appropriate stakeholders. Follow all safety protocols and guidelines to maintain a safe working environment. Assist in training new production operators on equipment operation and safety procedures. Collaborate with cross-functional teams, including manufacturing, engineering, and quality assurance, to resolve production-related issues. Rotate among all stations within each assembly cell performing repetitive work at a consistent pace to meet customer demands. Work overtime as needed. Other duties as assigned. **Additional Requirements and Skills** Attendance: Rarely absent or late, pre-schedules and pre-approves absences. Safety: Follows safety & housekeeping standards and procedures, uses appropriate Personal Protective Equipment (PPE), looks after the safety of others. Quality: Follows standard work procedures, self acknowledges and corrects mistakes, works to avoid errors and get it right the first time. **What We're Looking For** **Required Qualifications:** + High school diploma or general education degree (GED); or one to three months of related experience and/or training; or equivalent combination of education and experience. + Strong mechanical aptitude and troubleshooting skills **Preferred Qualifications:** + Prior experience in a manufacturing environment + Technical or vocational training/certification **Physical Requirements** While performing the duties of this job, the employee is regularly required to stand for long periods of time; use hands or fingers to handle or feel objects, tools, or controls; and reach with hands and arms. The employee frequently is required to walk and talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. While performing the duties of this job the employee frequently works near moving mechanical parts. The employee has the potential to be exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is at a level the company recommends hearing protection. The employee must be physically able to wear appropriate PPE. **What You'll Get from Us** 1. We promote from within and support your learning with mentoring, training, and access to global opportunities. 2. You'll have flexibility, autonomy, and support to do your best work while maintaining a healthy work-life balance. Your well-being matters to us. 3. We strive to create an inclusive work environment where people of all backgrounds are respected, and valued for who they are. 4. You'll receive benefits like 13th salary, annual bonus, paid vacation, pension plans, personal insurance, and more. These vary by country and contract, but they're worth asking about-we think they're pretty great. **Ready to Make a Difference?** If this role excites you, we'd love to hear from you! Apply now to start the conversation and learn more about where your career can go with us. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other protected category. Information at a Glance Apply now Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.000 people, serving customers in more than 100 countries through a global footprint of 95 factories. Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.360 people, serving customers in more than 100 countries through a global footprint of 95 factories. Apply now

Employment Type: Full Time Segment: Danfoss Power Solutions Segment Job Category: Supply Chain and Operations **The Impact You'll Make** A Production Operations Technician encompasses the job functions required to coordinate parts, assemble, test, paint, package, and ship company products. The POT performs a variety of manufacturing tasks that generally include assembling, operating equipment, setting up machines, testing, and dismantling unit assemblies and complex subassembly workstations according to standard work instructions. This is a 3rd Shift position, with work hours from Sunday through Thursday, 10:00 pm to 6:00 am. **What You'll Be Doing** Monitor production lines and equipment to ensure optimal performance and identify any issues or malfunctions. Troubleshoot and resolve equipment and machinery problems to minimize downtime and maintain production efficiency. Conduct routine maintenance tasks, including cleaning, lubricating, and adjusting machinery to ensure proper operation. Collaborate with the engineering team to implement process improvements and optimize production workflows. Perform quality control inspections to ensure products meet company standards and customer specifications. Document and report any production issues, equipment failures, or quality concerns to the appropriate stakeholders. Follow all safety protocols and guidelines to maintain a safe working environment. Assist in training new production operators on equipment operation and safety procedures. Collaborate with cross-functional teams, including manufacturing, engineering, and quality assurance, to resolve production-related issues. Rotate among all stations within each assembly cell performing repetitive work at a consistent pace to meet customer demands. Work overtime as needed to Other duties as assigned. **Additional Requirements and Skills** : Attendance: Rarely absent or late, pre-schedules and pre-approves absences. Safety: Follows safety & housekeeping standards and procedures, uses appropriate Personal Protective Equipment (PPE), looks after the safety of others. Quality: Follows standard work procedures, self acknowledges and corrects mistakes, works to avoid errors and get it right the first time. **What We're Looking For** **Required Qualifications:** + High school diploma or general education degree (GED); or one to three months of related experience and/or training; or equivalent combination of education and experience. + Strong mechanical aptitude and troubleshooting skills **Preferred Qualifications:** + Prior experience in a manufacturing environment + Technical or vocational training/certification **Physical Requirements:** While performing the duties of this job, the employee is regularly required to stand for long periods of time; use hands or fingers to handle or feel objects, tools, or controls; and reach with hands and arms. The employee frequently is required to walk and talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. While performing the duties of this job the employee frequently works near moving mechanical parts. The employee has the potential to be exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is at a level the company recommends hearing protection. The employee must be physically able to wear appropriate PPE. **What You'll Get from Us** 1. We promote from within and support your learning with mentoring, training, and access to global opportunities. 2. You'll have flexibility, autonomy, and support to do your best work while maintaining a healthy work-life balance. Your well-being matters to us. 3. We strive to create an inclusive work environment where people of all backgrounds are respected, and valued for who they are. 4. You'll receive benefits like 13th salary, annual bonus, paid vacation, pension plans, personal insurance, and more. These vary by country and contract, but they're worth asking about-we think they're pretty great. **Ready to Make a Difference?** If this role excites you, we'd love to hear from you! Apply now to start the conversation and learn more about where your career can go with us. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other protected category. Information at a Glance Apply now Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.000 people, serving customers in more than 100 countries through a global footprint of 95 factories. Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.360 people, serving customers in more than 100 countries through a global footprint of 95 factories. Apply now

Job Title: Production Operations Technician / 3rd Shift Req ID: 47487 Ames, IA, USA Employment Type: Full Time Segment: Danfoss Power Solutions Segment Job Category: Supply Chain and Operations On-site The Impact You'll Make A Production Operations Technician encompasses the job functions required to coordinate parts, assemble, test, paint, package, and ship company products. The POT performs a variety of manufacturing tasks that generally include assembling, operating equipment, setting up machines, testing, and dismantling unit assemblies and complex subassembly workstations according to standard work instructions. This is a 3rd Shift position, with work hours from Sunday through Thursday, 10:00 pm to 6:00 am. What You'll Be Doing Monitor production lines and equipment to ensure optimal performance and identify any issues or malfunctions.Troubleshoot and resolve equipment and machinery problems to minimize downtime and maintain production efficiency.Conduct routine maintenance tasks, including cleaning, lubricating, and adjusting machinery to ensure proper operation.Collaborate with the engineering team to implement process improvements and optimize production workflows.Perform quality control inspections to ensure products meet company standards and customer specifications.Document and report any production issues, equipment failures, or quality concerns to the appropriate stakeholders.Follow all safety protocols and guidelines to maintain a safe working environment.Assist in training new production operators on equipment operation and safety procedures.Collaborate with cross-functional teams, including manufacturing, engineering, and quality assurance, to resolve production-related issues.Rotate among all stations within each assembly cell performing repetitive work at a consistent pace to meet customer demands.Work overtime as needed to Other duties as assigned. Additional Requirements and Skills: Attendance: Rarely absent or late, pre-schedules and pre-approves absences. Safety: Follows safety & housekeeping standards and procedures, uses appropriate Personal Protective Equipment (PPE), looks after the safety of others.Quality: Follows standard work procedures, self acknowledges and corrects mistakes, works to avoid errors and get it right the first time.What We're Looking For Required Qualifications: High school diploma or general education degree (GED); or one to three months of related experience and/or training; or equivalent combination of education and experience. Strong mechanical aptitude and troubleshooting skills Preferred Qualifications: Prior experience in a manufacturing environment Technical or vocational training/certification Physical Requirements: While performing the duties of this job, the employee is regularly required to stand for long periods of time; use hands or fingers to handle or feel objects, tools, or controls; and reach with hands and arms. The employee frequently is required to walk and talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl.While performing the duties of this job the employee frequently works near moving mechanical parts. The employee has the potential to be exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is at a level the company recommends hearing protection. The employee must be physically able to wear appropriate PPE.What You'll Get from Us We promote from within and support your learning with mentoring, training, and access to global opportunities. You'll have flexibility, autonomy, and support to do your best work while maintaining a healthy work-life balance. Your well-being matters to us. We strive to create an inclusive work environment where people of all backgrounds are respected, and valued for who they are. You'll receive benefits like 13th salary, annual bonus, paid vacation, pension plans, personal insurance, and more. These vary by country and contract, but they're worth asking about-we think they're pretty great. Ready to Make a Difference? If this role excites you, we'd love to hear from you! Apply now to start the conversation and learn more about where your career can go with us. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other protected category. $('span', '.jobdescription').remove Attr("style"); Information at a Glance Apply now Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.000 people, serving customers in more than 100 countries through a global footprint of 95 factories. Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.360 people, serving customers in more than 100 countries through a global footprint of 95 factories. Apply now

Job Title: Production Operations Technician / 2nd Shift Req ID: 47644 Ames, IA, USA Employment Type: Full Time Segment: Danfoss Power Solutions Segment Job Category: Supply Chain and Operations On-site The Impact You'll Make A Production Operations Technician encompasses the job functions required to coordinate parts, assemble, test, paint, package, and ship company products. The POT performs a variety of manufacturing tasks that generally include assembling, operating equipment, setting up machines, testing, and dismantling unit assemblies and complex subassembly workstations according to standard work instructions.This is a 2rd Shift position, with work hours from Monday through Friday, 2:00 pm to 10:00 pm. What You'll Be Doing Monitor production lines and equipment to ensure optimal performance and identify any issues or malfunctions.Troubleshoot and resolve equipment and machinery problems to minimize downtime and maintain production efficiency.Conduct routine maintenance tasks, including cleaning, lubricating, and adjusting machinery to ensure proper operation.Collaborate with the engineering team to implement process improvements and optimize production workflows.Perform quality control inspections to ensure products meet company standards and customer specifications.Document and report any production issues, equipment failures, or quality concerns to the appropriate stakeholders.Follow all safety protocols and guidelines to maintain a safe working environment.Assist in training new production operators on equipment operation and safety procedures.Collaborate with cross-functional teams, including manufacturing, engineering, and quality assurance, to resolve production-related issues.Rotate among all stations within each assembly cell performing repetitive work at a consistent pace to meet customer demands.Work overtime as needed.Other duties as assigned.Additional Requirements and Skills Attendance: Rarely absent or late, pre-schedules and pre-approves absences. Safety: Follows safety & housekeeping standards and procedures, uses appropriate Personal Protective Equipment (PPE), looks after the safety of others.Quality: Follows standard work procedures, self acknowledges and corrects mistakes, works to avoid errors and get it right the first time.What We're Looking For Required Qualifications: High school diploma or general education degree (GED); or one to three months of related experience and/or training; or equivalent combination of education and experience. Strong mechanical aptitude and troubleshooting skills Preferred Qualifications: Prior experience in a manufacturing environment Technical or vocational training/certification Physical Requirements While performing the duties of this job, the employee is regularly required to stand for long periods of time; use hands or fingers to handle or feel objects, tools, or controls; and reach with hands and arms. The employee frequently is required to walk and talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl.While performing the duties of this job the employee frequently works near moving mechanical parts. The employee has the potential to be exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is at a level the company recommends hearing protection. The employee must be physically able to wear appropriate PPE.What You'll Get from Us We promote from within and support your learning with mentoring, training, and access to global opportunities. You'll have flexibility, autonomy, and support to do your best work while maintaining a healthy work-life balance. Your well-being matters to us. We strive to create an inclusive work environment where people of all backgrounds are respected, and valued for who they are. You'll receive benefits like 13th salary, annual bonus, paid vacation, pension plans, personal insurance, and more. These vary by country and contract, but they're worth asking about-we think they're pretty great. Ready to Make a Difference? If this role excites you, we'd love to hear from you! Apply now to start the conversation and learn more about where your career can go with us. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or other protected category. $('span', '.jobdescription').remove Attr("style"); Information at a Glance Apply now Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.000 people, serving customers in more than 100 countries through a global footprint of 95 factories. Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.360 people, serving customers in more than 100 countries through a global footprint of 95 factories. Apply now

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

What you will do: As an employee-owner, you will be reporting to the Quality Manager, your responsibility is to support the objectives of the Quality Management System. Qualifications: Detail-oriented, organization, and multi-tasking are highly encouraged skill set needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Support verification that product received / inspected complies with applicable specifications and requirements. Capable of accurately inspecting parts using standard quality measurement tools including Calipers, Micrometers, multimeters etc.. Must be able to interpret Schematics, blueprints, material specifications and/or other criteria for inspection purposes. Audit products and processes according to applicable instructions or other criteria. Supports the Quality Engineers' efforts. Works with internal stakeholders to address and resolve product/process issues as they relate to supplier products, internal defects, and customer reported defects. Participates in a team approach to root cause analysis efforts with the goal instituting sound corrective actions that eliminate the issue. Perform basic tool calibrations and ensure proper tool functions. Provide sorting assistance when suspect product is found. Flex responsibilities to support the needs of the Quality department. Must be able to accurately record and process data using CSI or other data management software. Must be mechanically inclined and able to use basic hand tools Support the Warranty department in processing return materials for evaluations. Work attendance must be exemplary. What we do: SRC Technologies is a Remanufacturing Solutions Provider focused on working closely with Original Equipment Manufacturers to build successful rotating electrical and electronic offerings. Rewards for you: Exceptional health benefits Vacation & Holiday Pay 5% 401(k) Match 100% Employee Owned Training and Advancement Opportunities 100% Tuition Reimbursement Quarterly Bonus Program Outstanding Company Culture How we do it: Through a culture of ownership! We're committed to creating a business of business-people through teaching Financial Literacy and playing The Great Game of Business. Our company is 100% Employee Owned and associates share in the wealth they help create. SRC Technologies Group, a subsidiary of SRC Holdings Corporation (SRC), is headquartered in Springfield, Missouri. SRC was founded in 1983 by Jack Stack, renowned author, lecturer, and CEO who created the business literacy and open book management program “The Great Game of Business”. Click here to find out more about The Great Game of Business Location: 2401 E. Sunshine St. Springfield, MO 65804

MDM (Master Data Management) Support manufacturing and engineering data management, CCOs and Work Instructions The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development * Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Maintenance Manufacturing Engineering Tech Reports to: Maintenance Manager Scope: The Maintenance Manufacturing Engineering Technician is responsible for the safe and efficient maintenance of plant assets. They define and lead processes and systems for providing a proper response to failures and quality repairs to the equipment by specifying repairs and modifications to equipment. It is important to note the maintenance ME Tech is not the backfill for the manager on leave, contractor management, and other administrative duties that are part of the maintenance function. Responsibilities and Duties: Developing maintenance procedures, methods, and testing Supporting craftsmen performing all facets of maintenance work and responding to equipment faults Troubleshooting equipment breakdowns Specifying replacement parts and ensuring the equipment is functioning correctly Assist Planners in the development of Work Packages Inspecting jobs to verify the work is performed correctly Partnering with other departments and customers, specifically other Engineering and production teams Developing processes to manage maintenance tools, and equipment Monitoring and controlling maintenance costs Leading responses for emergencies, unplanned problems, and repairs Driving improvements in health and safety policies and procedures Leading improvement to maintenance methods and safety of plant, personnel, and production processes Provide skill-based training to craftsmen on specific equipment in the plant and general skill-based knowledge Programming programmable logic controllers (PLC), and distributed control system (DCS) (electrical) Developing installation and commissioning packages for new installation Measurement of Position Performance: Provide timely technical support to supervisors and trades Improve mean time to repair (MTTR), extend mean to between failure (MTBF) Additions and corrections to spare parts as required. PM & PdM program executed on time as planned Position Goals: The maintenance ME Tech has the following primary goals: Technical support to the maintenance staff (supervisors and trades) Ensure the maintenance function provides operations with the service it requires PM & PdM program executed as scheduled, corrective actions addressed Minimize MTTR and operational downtime by supporting equipment repair right the first time Relationships: Work closely with operations and maintenance supervision. Work closely with planners and scheduler Work closely with stores and purchasing personnel Maintain good working relationships with maintenance trades Coordinate asset management activities with reliability Engineers Work with other organizational units such as HR and accounting Maintenance ME Tech is different and distinct from project, process, and reliability technicians. Maintenance ME Tech focuses on the preservation of day-to-day asset reliability. Requirements, Qualifications, and Selection Criteria: Mechanical / Electrical Engineering degree or significant experience with a tech school background desired. Have an understanding of equipment operation Have an understanding of equipment repair practices Ability to use a CMMS and analyze data Training in industrial automation Training and certifications in some of the following: Predictive Technologies Repair Practices Spare Parts Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

MDM (Master Data Management) Support manufacturing and engineering data management, CCOs and Work Instructions The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Coordinates all functions related to technical support for specified departments. Assists coach(es) with technical resources necessary to improve efficiencies and quality. Assures that all processes in the technical support areas conform to Liebert Quality System. Assist with corrective action and follows up with quality issues. Responsible for a variety of tasks including, but not limited to, evaluating, and recommending process improvements; time studies; work instructions; assisting with tooling modifications; and assisting with relocating and setting up of stations. Assists coach(es) with the coordination of departmental safety team meetings. Assists with corrective actions and follows up on quality issues. Provides technical support and troubleshoot complex issues. Recommends process improvements. Conducts time studies and work instructions Assists with tool and jig modifications Improves workstation ergonomics Able to lift up to 50 pounds unassisted. able to work cross functionally. Able to foster teamwork and resolve conflict. Able to work in fast past environment and be self-motivated and directed. Able to work long hours and a variety of shifts as needed. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Coordinates all functions related to technical support for specified departments. Assists coach(es) with technical resources necessary to improve efficiencies and quality. Assures that all processes in the technical support areas conform to Liebert Quality System. Assist with corrective action and follows up with quality issues. Responsible for a variety of tasks including, but not limited to, evaluating, and recommending process improvements; time studies; work instructions; assisting with tooling modifications; and assisting with relocating and setting up of stations. Assists coach(es) with the coordination of departmental safety team meetings. Assists with corrective actions and follows up on quality issues. Provides technical support and troubleshoot complex issues. Recommends process improvements. Conducts time studies and work instructions Assists with tool and jig modifications Improves workstation ergonomics Able to lift up to 50 pounds unassisted. able to work cross functionally. Able to foster teamwork and resolve conflict. Able to work in fast past environment and be self-motivated and directed. Able to work long hours and a variety of shifts as needed. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8 billion in sales, a strong customer base and global reach in nearly 130+ countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Same Posting Description for Internal and External Candidates

Maintenance Manufacturing Engineering Tech Reports to: Maintenance Manager Scope: The Maintenance Manufacturing Engineering Technician is responsible for the safe and efficient maintenance of plant assets. They define and lead processes and systems for providing a proper response to failures and quality repairs to the equipment by specifying repairs and modifications to equipment. It is important to note the maintenance ME Tech is not the backfill for the manager on leave, contractor management, and other administrative duties that are part of the maintenance function. Responsibilities and Duties: Developing maintenance procedures, methods, and testing Supporting craftsmen performing all facets of maintenance work and responding to equipment faults Troubleshooting equipment breakdowns Specifying replacement parts and ensuring the equipment is functioning correctly Assist Planners in the development of Work Packages Inspecting jobs to verify the work is performed correctly Partnering with other departments and customers, specifically other Engineering and production teams Developing processes to manage maintenance tools, and equipment Monitoring and controlling maintenance costs Leading responses for emergencies, unplanned problems, and repairs Driving improvements in health and safety policies and procedures Leading improvement to maintenance methods and safety of plant, personnel, and production processes Provide skill-based training to craftsmen on specific equipment in the plant and general skill-based knowledge Programming programmable logic controllers (PLC), and distributed control system (DCS) (electrical) Developing installation and commissioning packages for new installation Measurement of Position Performance: Provide timely technical support to supervisors and trades Improve mean time to repair (MTTR), extend mean to between failure (MTBF) Additions and corrections to spare parts as required. PM & PdM program executed on time as planned Position Goals: The maintenance ME Tech has the following primary goals: Technical support to the maintenance staff (supervisors and trades) Ensure the maintenance function provides operations with the service it requires PM & PdM program executed as scheduled, corrective actions addressed Minimize MTTR and operational downtime by supporting equipment repair right the first time Relationships: Work closely with operations and maintenance supervision. Work closely with planners and scheduler Work closely with stores and purchasing personnel Maintain good working relationships with maintenance trades Coordinate asset management activities with reliability Engineers Work with other organizational units such as HR and accounting Maintenance ME Tech is different and distinct from project, process, and reliability technicians. Maintenance ME Tech focuses on the preservation of day-to-day asset reliability. Requirements, Qualifications, and Selection Criteria: Mechanical / Electrical Engineering degree or significant experience with a tech school background desired. Have an understanding of equipment operation Have an understanding of equipment repair practices Ability to use a CMMS and analyze data Training in industrial automation Training and certifications in some of the following: Predictive Technologies Repair Practices Spare Parts Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Located in the heart of Silicon Valley, Tenergy is a total power solution provider in the rechargeable battery and renewable energy industry. With over 20 years of reputation and track record, Tenergy is a recognized leading battery brand and Power solution partner in the fast growing renewable energy sector. Tenergy serves broad spectrums of customers for their applications including consumer electronics smart devices, industrial application, medical, electrical transportation and power storage. The application and business possibility with our products is endless with increasing needs for mobility and durable power. Tenergy offers competitive products in the market due to our global logistics, scale, quality, and commitment to customer satisfaction. Job Description The candidate will work in a team work environment, perform battery testing and battery charging duties, may assemble small size battery packs and related sub-assemblies when needed. Candidate must be a team player with demonstrated skills and abilities, or the fast learner in assembly manufacturing, material handling, soldering, wiring and ability to comprehend basic prints and wiring diagrams. The candidate may perform a variety of tasks in accordance with their training, experience, and skill as assigned by their Lead or Supervisor including: Assemble small size battery packs and related sub-assemblies according to specifications and drawings. Spot soldering and welding for electrical board (PCB). QC Testing and RMA analysis. Perform battery testing according to the defined procedures. Perform battery charging according to defined operating procedures. Perform proper data recording. Report issues and troubleshooting issues identified during the testing. May assist with new battery pack design. May assist with existing battery pack design improvement. Qualifications College degree in engineering Attention to details and responsible work attitude Excellent hand-eye coordination, hands-on, manual dexterity Ability to read/listen carefully to follow instructions and procedures Team player with good communication, interpersonal skills Ability to use common sense to solve practical problems. Electrical-related knowledge and training are plus. Experience in electrical assembly and soldering is a plus. Additional Information Salary DOE $20-$23/hr. Eligible for Medical/Dental/Vision Insurance and 401K with company match, paid holidays. Work schedule is Monday- Friday 8:30am-5:00pm.