Circuit Check jobs - 21,325 jobs

About the job Who We Are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The Load and Wire Assembler is responsible for the loading and pre-assembling of test fixture plates for wire using manual tools with small interface pins and probes. This role ensures high-quality workmanship in the production of electronic assemblies. This position reports to the Load and Wire Supervisor and according to the FLSA (Fair Labor Standards Act) is classified as non-exempt. What You'll Be Doing Loads and pre-assembles fixture plates to get ready for wire using manual tools with small interface pins and probes, portable powered tools, or operating equipment as necessary to perform operations Solders connections Discusses concerns in diagrams or production order with supervisor or engineer to clarify loading and wiring discrepancies Performs quality check of own work and any related rework, involving supervisor and/or engineering as necessary Records all deviations and modifications from original design Completes all checklists prior to delivering test fixture Records time spent working on specific jobs Maintains and cleans work area and keeps tools/equipment in a clean and orderly condition and follows prescribed safety regulations Performs additional duties and tasks as assigned by Supervisors and/or Managers. What You Bring to the Table To perform this job successfully, you must be able to perform each essential duty satisfactorily, and regular attendance is required. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job. Reasonable accommodation may be made to support individuals with disabilities. Required Ability to maintain a full time schedule High school diploma or equivalent Ability to learn specialized machines used during the fixture build Ability to read electrical schematics and assembly drawings to accurately locate and install probes and receptacles in fixture plates and interfaces Proven ability working with tools such as soldering irons, cutters, magnifiers, and microscopes Thorough understanding and adherence to safety and ESD procedures. Preferred Experience in a mid- to high-volume electronics manufacturing environment Ability to learn specialized machines. What to Expect at Work Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to support individuals with limitations. Ability to sit for extended lengths of time; bend, reach, stoop and twist as required Ability to lift and carry up to 20 lbs May involve repetitive tasks and extended periods of concentration Ability to use a microscope for prolonged periods of time Position requires close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus; the job requires long periods of time spent focusing on small components. Must have excellent natural or corrected vision. Working Environment The work environment characteristics described here are representative of those you may encounter while performing the essential functions of this job. Being present at work is critical to the success of this role Indoor climate controlled Works around equipment moving mechanical parts Regular exposure to manufacturing areas which may entail exposure to dirt, dust, noise, machine chemicals, fumes and other attributes common to this environment. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current base pay range for new hires is $18.00 - $22.00 per hour and is eligible for performance-based quarterly profit sharing. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with eight paid holidays. Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity- race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, arrest record or expunged or sealed convictions, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law.

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Primary Objective of Position: The Project Manager has the overall responsibility for the successful planning and execution of each project. They will be the main customer contact throughout the project from the proposal presentation to post-delivery support and will be required to develop and maintain good working relationships both with the customer and between the various departments. This will include the planning and management of the scope of work, schedule, open items, documentation, and budget. This is a highly visible role that will be customer facing either in person, video conferencing or phone. Our projects are often custom, so being able to incorporate your technical experience, along with historical data from disparate sources is mission critical. Major Areas of Accountability: Prepare proposals, evaluate estimated margins, and determine the presentation strategy with management. Provide direction and control for multi-disciplinary project teams. This includes all phases of the project from concept design through system design, integration, buy off/acceptance and factory installation. Foster strong customer relationships through good communication throughout the project lifecycle. Update the customer as required on project progress, scope, open issues, schedule, and technical issues. Prepare and maintain the project budget based on the quotation, any Engineering Change Orders (ECOs) and all customer Purchase Orders. Prepare and maintain the project schedule - for both internal and customer use, including coordination of all CCI customer deliverables. Ensure that all project deliverables are complete and delivered as per schedule. Assist department managers in manpower planning for their project(s). Monitor and maintain the financial success of the project by tracking all material and labor costs throughout the project lifecycle and adjusting as required Continually review scope of work for any possible risk items. Develop, initiate, and monitor any risk mitigation plans. Continuously monitor all project resources to ensure the project remains on target from a cost, scope, schedule, and technical perspective. Monitor the procurement process to ensure that materials are delivered as per current project schedule. Schedule and manage all design reviews to ensure that the work is executed in a timely fashion and that the resultant designs meet scope, cost, and schedule requirements. Provide regular job status reviews to management. Senior Project Manager will handle a larger number of and more complex of projects. Support the sales process for assigned accounts by interfacing with customers to clarify the RFQ, oversee the proposal development process, and present/sell the resulting proposal in coordination with Outside Sales. Provide direction to the Applications Engineering group in developing proposals for assigned accounts, including defining the scope of effort and initial design concept. Education and Experience: Bachelor's Degree in an Engineering discipline and or equivalent experience. A minimum of 8 years of relevant Project experience preferably in a test and development environment. Knowledge, Skills, and Abilities Required: Solid technical knowledge including broad understanding of electrical, software and mechanical engineering concepts. Solid understanding of commercial aspects of contract engineering. Strong influencing, negotiating and relationship building skills. Strong communication skills; able to articulate the benefits and preferences of each product. Prioritization/organization of work and multi-tasking skills are critical to this position. Capacity to deal with a high workload and under pressure of meeting deadlines. The environment is very dynamic and everchanging. Excellent listening, negotiation, and presentation skills. Proficiency with Microsoft Office Suite. Requires a strong initiative, self-starter, proactive nature, and a sense of urgency. Looking for someone willing to roll up their sleeves and jump in, even where there is ambiguity. Maintains confidentiality and security of intellectual property (ITAR, Prototype) Preferred Attributes Ability to jump in and roll up sleeves to problem solve when there is ambiguity and no defined process. Small to midsize company experience a plus. Strong customer orientation and ability to translate complex engineering concepts Clear communicator who thrives in a cross-functional engineering culture. Pay and Benefits CCI is committed to offering competitive pay and benefits, including, but not limited to: Flexible work hours Paid Time Off (PTO) and Paid Holidays Medical, Dental, and Vision Insurance Plans HSA and FSA Life Insurance 401(k) with match Tuition Reimbursement Pet Insurance Identity Theft Insurance Medical Bridge/Critical Care/Cancer/Accident Insurance Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 30 lbs. occasionally Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current pay range is $115,000 - $140,000. Listed range represents the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. This range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to *******************. Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, genetic information, sexual orientation, marital status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status).If you need a reasonable accommodation for any part of the employment process, please contact us by email at ******************* and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation.

This position is responsible for ensuring the production of safe, high-quality food products in compliance with regulatory, customer, and company standards. This role leads the facility's food safety and quality programs, oversees compliance with HACCP, FSMA, and GFSI requirements, and provides leadership to QA and sanitation teams to maintain continuous improvement in quality systems and plant hygiene. Essential Functions Quality Assurance & Compliance Manage and maintain the plant's Quality Management System (QMS) to meet internal, customer, and third-party audit requirements. Oversee daily QA operations including product testing, process verification, and documentation review. Lead and coordinate internal, customer, and regulatory audits (FDA, USDA, State, GFSI). Investigate non-conformances, implement root cause analysis, and ensure timely corrective and preventive actions (CAPAs). Ensure compliance with labeling, allergen control, and traceability requirements. Maintain accurate and complete quality and production records in compliance with regulatory standards. Food Safety & HACCP Serve as the plant's PCQI (Preventive Controls Qualified Individual). Oversee implementation, verification, and validation of food safety programs including HACCP, FSMA Preventive Controls, environmental monitoring, and supplier verification. Lead the Food Safety Team and ensure effective communication of food safety objectives across departments. Monitor trends in microbiological results, environmental swabs, and product testing to proactively identify risks. Leadership & Training Develop and deliver employee training on GMPs, food safety, allergen control, sanitation, and quality awareness. Promote a culture of food safety and continuous improvement throughout the facility. Collaborate cross-functionally with Production, Maintenance, and Sanitation teams to ensure alignment with quality objectives. Continuous Improvement Analyze process data to identify opportunities for quality improvement and waste reduction. Support implementation of initiatives related to product quality and safety. Recommend and validate changes to formulations, processes, or equipment to improve quality performance. Competencies Page Break Problem Solving/Analysis Works independently Dependable Strong Communication Skills Teamwork Innovative Computer Skills Time Management/Initiative Attentive to detail Trainable Page Break Supervisory Responsibility This position will have direct supervisory responsibility for a portion of the Quality Assurance team. Work Environment This job operates in a plant environment and office. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. Exposed to extreme temperature variations. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands for this position are approximately 60% active and 40% sedentary work. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently will need to sit, stand, walk and climb stairs. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position. Typical schedule is Monday through Friday with occasional evening and weekend work possible based on specific project needs. Travel Less than ten percent travel expected for this position. Required Education, Experience & Certifications Bachelor's degree in related field and/or a minimum of 10 years' experience in food manufacturing quality assurance and/or sanitation leadership. Knowledge of food safety regulations including HACCP, GMP, FSMA and SQF. Strong leadership and team management experience. Ability to conduct audits, troubleshoot quality issues and implement improvements. Preferred Education, Experience & Certifications Master's degree in food science. Bilingual in English/Spanish. Preventive Controls Qualified Individual certification. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of responsibilities, duties or tasks that are required of the employee for this job. Responsibilities, duties and tasks may change at any time with or without notice. Monday - Friday; night or weekends as needed for projects 8:00 am - 5:00 pm

About the RoleWho We Are At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Circuit Check is an engineering services company focusing on development of automated test equipment for top companies in the electronics industry. Circuit Check test solutions are found in electronics design and manufacturing facilities around the world. Primary Objective of the Test Engineer: Provide test methods, perform testing, and support debugging of test fixtures developed by the Company to deliver products and services recognized by our customers as having world class quality, reliability, and perceived value. Major Areas of Accountability of the Test Engineer: Perform tester checkout on completed ICT fixtures performing and supporting debug and rework of fixtures which do not pass on the ICT platform Write and debug test programs and/or create basic test files for Keysight/Agilent 3070, GenRad 228X, and various Teradyne ICT platforms Interface with account managers and/or customers to acquire the latest test software for test fixture checkout and provide technical support for customers utilizing Company developed hardware and/or software Track defect rates for product tested on the ICT platforms by documenting them in the NCR database and work proactively with the production team to reduce defects and improve yield Perform installation and debug of ICT fixtures at customer sites Provide maintenance and debug support for ICT platforms. Education and Experience Required of the Test Engineer: Bachelor's Degree in Electrical Engineering, Computer Science, or equivalent experience in a test engineering environment Experience developing test files for Keysight/Agilent 3070, GenRad 228X, and various Teradyne ICT platforms 5 years of experience working in an electromechanical manufacturing environment Experience modifying customer-provided software to perform tester checkout Experience writing and debugging ICT software Experience performing customer installation and debug Functional test experience utilizing NI LabVIEW is preferred. Knowledge, Skills, and Abilities Required of the Test Engineer: Proven ability to manage multiple projects at a time while paying strict attention to detail Solid analytical skills; able to resolve complex technical problems with innovative solutions Excellent verbal and written communication skills Capacity to deal with a high workload and deadline pressure Proficiency with Microsoft Word and Excel Strong initiative, proactive nature, and a sense of urgency Ability to modify customer-provided software to perform checkout of test fixtures Ability to write custom test software for multiple ICT platforms Maintains confidentiality and security of intellectual property (ITAR, Prototype) Ability to travel within the US. Physical Requirements (these physical requirements must be performed with or without accommodation) of the Test Engineer: Being present at work and maintain a full-time schedule within the core hours of business operations Majority of time is spent on the production floor in usual office working conditions Ability to sit for extended lengths of time; bend, reach, stoop, and twist Use of an office computer for preparing work, and test platform for completing work Regular exposure to moving mechanical parts and vibration; risk of electrical shock Regular exposure to manufacturing areas which may entail exposure to dirt, dust, noise, machine chemicals, fumes, and other attributes common to this environment Ability to lift and carry up to 20 lbs. Ability to travel as necessary and work extended hours as job duties demand. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Compensation includes base salary, performance-based annual bonuses, and equity. [hourly base rate and performance-based quarterly profit sharing]. Benefit offerings include medical, dental, vision, term life insurance, short-term and long-term disability, and retirement programs. Paid leave includes paid time off and holiday pay. Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law.

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

About the job Who We Are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The PCB/PCBA Specialist is responsible for hand-soldering through-hole and surface mount components onto printed circuit boards (PCBs) ensuring high-quality workmanship in the production of electronic assemblies. This position reports to the Load and Wire Supervisor and according to the FLSA (Fair Labor Standards Act) is classified as non-exempt. What You'll Be Doing Read and interpret assembly drawings, schematics, and work instructions Inspect solder joints for quality and correct any defects Record all deviations and modifications from original design Identify and report assembly or part defects to supervisors or quality control Trim component leads and clean boards with strong attention to detail and hand-eye coordination Maintain confidentiality and security of intellectual property (CUI-ITAR, Prototype). What You Bring to the Table To perform this job successfully, you must be able to perform each essential duty satisfactorily, and regular attendance is required. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job. Reasonable accommodation may be made to support individuals with disabilities. Required Ability to maintain a full time schedule High school diploma or equivalent IPC-610 or J-STD-001 certification 1+ years of experience in hand soldering electronic components (through-hole/surface mount) with precision and consistency Ability to read and interpret schematics and drawings to accurately place components Proven ability working with tools such as soldering irons, cutters, magnifiers, and microscopes Thorough understanding and adherence to safety and ESD procedures. Preferred Experience in a mid- to high-volume electronics manufacturing environment Ability to learn specialized machines. What to Expect at Work Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to support individuals with limitations. Ability to sit for extended lengths of time; bend, reach, stoop and twist as required Ability to lift and carry up to 20 lbs May involve repetitive tasks and extended periods of concentration Ability to use a microscope for prolonged periods of time Position requires close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus; the job requires long periods of time spent focusing on small components. Must have excellent natural or corrected vision. Working Environment The work environment characteristics described here are representative of those you may encounter while performing the essential functions of this job. Being present at work is critical to the success of this role Indoor climate controlled Works around equipment moving mechanical parts Regular exposure to manufacturing areas which may entail exposure to dirt, dust, noise, machine chemicals, fumes and other attributes common to this environment. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current base pay range for new hires is $18.00 - $24.00 per hour and is eligible for performance-based quarterly profit sharing. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with eight paid holidays. Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity- race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, arrest record or expunged or sealed convictions, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law.

About the Job Who We Are: Circuit Check is a high-energy, market-leading, provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The electronics engineering technician partners with the manufacturing teams and multiple engineering disciplines across the organization in all areas of mechanical and electrical/electronic design. This position reports to the Electrical Integration Manager of the Functional Test group and is classified as non-exempt according the FLSA (Fair Labor Standards Act). What You'll Be Doing The electronics engineering technician conducts, maintains, tests and repairs electrical/electronic, mechanical, hydraulic, and pneumatic systems and components. The position applies knowledge of electrical/electronics and mechanical principles in determining equipment malfunctions and applies skills in restoring equipment to operation. The electronics technician provides skilled mechanical and electrical/electronic support to all areas of manufacturing as well as field service duties. What You Bring to the Table To perform this job successfully, you must be able to perform each essential duty satisfactorily, and regular attendance is required. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job. Reasonable accommodation may be made to support individuals with disabilities. Major Areas of Accountability: Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment, including programmable controls, numeral controls, power supplies, drives, gages and test equipment Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements Informs appropriate management of potential electrical/mechanical problems and inherent dangers involved Maintains company-required performance and maintenance records for identified equipment Performs preventive maintenance functions as directed Assists maintenance personnel with technical troubleshooting Maintain TSE Lab Environment Assists and trains other maintenance and other technical-level employees Manages, creates, and perform parts entry into IFS ERP system Configures and modifies CCITest sequences Provides field support at the customer site for test system installation as well as repairs Knowledge, Skills, and Abilities: An Associate's degree in electronics or related field is required with a minimum of 6 years of work experience in electronics performing similar functions. A thorough knowledge of electrical/electronic components and equipment, including the use of special instruments for diagnostic purposes Solid analytical skills; able to resolve complex technical problems Ability to read and interpret technical drawings (blueprints and schematics) and specifications Requires a strong initiative, proactive nature and a sense of urgency Must be able to work in a changing, fast-paced environment and handle multiple priorities simultaneously Working knowledge of confidentiality and security of intellectual property (ITAR, Prototype) What to Expect at Work Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to support individuals with disabilities. This position requires simple and firm grasping and fine manipulating of the hands to assemble, operate tooling and testing equipment Regular exposure to manufacturing areas which may entail exposure to dirt, dust, noise, machine chemicals, fumes, and other attributes common to this environment Ability to lift and carry up to 20 lbs. Working Environment The work environment characteristics described here are representative of those you may encounter while performing the essential functions of this job. Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop and twist as required Regular exposure to moving mechanical parts and vibration; risk of electrical shock. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. The wage range is $26 to $35 per hour. The hiring manager will determine the final starting wage (within the range above) based on the successful applicant's qualifications. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Compensation includes hourly base rate and performance-based quarterly profit sharing. Benefit offerings include medical, dental, vision, employer paid term life insurance, short-term and long-term disability, and retirement program with employer match. Paid leave includes paid time off and holiday pay. Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law.

About the job Who we are: Circuit Check is a global leader in automated test systems for complex electronics. Our Technology and Solutions Group (TSG) is driving innovation across hardware, software, and data to define the next generation of intelligent, scalable test platforms. We're seeking a Product Manager, Functional Test who will own the definition and evolution of Circuit Check's functional test platform - bringing together instrumentation, control software, and system integration into a cohesive, scalable offering for our customers. This role requires both technical depth and commercial insight: someone who understands ATE design, customer production challenges, and how to convert engineering capability into standardized, repeatable test solutions. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The Product Manager, Functional Test will serve as the architect and champion of Circuit Check's custom test system development platform, ensuring that our tools, architectures, and processes deliver consistent performance and reliability across industries. You will work closely with design engineers, system integrators, and customers to define our standard toolset and hardware platform, balancing innovation with manufacturability and supportability. This position is ideal for someone who thrives at the intersection of engineering, product strategy, and customer engagement - with approximately 25% travel to customer sites,, vendors, and Circuit Check facilities. Key Responsibilities Platform Ownership: Define and maintain the roadmap for Circuit Check's functional test system platform, including instrumentation, hardware interfaces, and software architecture Customer Engagement: Collaborate directly with customers to understand testing needs, production environments, and industry trends, translating insights into platform improvements System Integration: Lead cross-functional efforts to align mechanical, electrical, and software teams around a unified architecture for test solutions Toolset Development: Standardize and continuously improve Circuit Check's toolset for ATE system development, from hardware frameworks to software integration and documentation Technology Evaluation: Assess and integrate technologies from National Instruments, Rohde & Schwarz, Keysight, and Tektronix, as well as test executives (e.g., LabVIEW/TestStand) and emerging automation tools Quality & Scalability: Ensure that test platforms meet the highest standards for reliability, maintainability, and calibration traceability Training & Evangelism: Act as an internal and external advocate for functional test excellence - enabling sales, training engineers, and supporting customers. Required Qualifications Bachelor's degree in electrical engineering, computer engineering, or related technical field Minimum 5 years of experience in functional test or ATE system design, integration, or product management Deep familiarity with instrumentation from National Instruments, Rohde & Schwartz, Keysight, and Tektronix Demonstrated experience with LabVIEW, TestStand or other Test Executive environments Proven ability to synthesize information from engineering, customer feedback, and market trends into coherent product direction Excellent communication skills and the ability to work cross-functionally with design, manufacturing, and commercial teams Willingness to travel approximately 25% for customer collaboration and platform deployment. Preferred Attributes Experience building or managing modular test platforms for high-mix or high-reliability electronics Understanding of calibration, traceability, and compliance standards (ISO, IPC, MIL-STD, etc.) Demonstrated ability to mentor teams on test strategy, fixture design, or measurement best practices Strong customer orientation and ability to translate complex engineering concepts into business value Strong systems thinking and ability to bridge business needs with technical design Clear communicator who thrives in a cross-functional engineering culture. Pay and Benefits CCI is committed to offering competitive pay and benefits, including, but not limited to: Flexible work hours Paid Time Off (PTO) and Paid Holidays Medical, Dental, and Vision Insurance Plans HSA and FSA Life Insurance 401(k) with match Tuition Reimbursement Pet Insurance Identity Theft Insurance Medical Bridge/Critical Care/Cancer/Accident Insurance This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current pay range is $120,000 - $200,000. Listed range represents the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. This range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to *******************. Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, genetic information, sexual orientation, marital status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status).If you need a reasonable accommodation for any part of the employment process, please contact us by email at ******************* and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation.

WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Primary Objective of Position: The Project Manager has the overall responsibility for the successful planning and execution of each project. They are the main customer contact throughout the project from the incoming order to post-delivery support and will be required to develop and maintain good working relationships both with the customer and between the various departments. This will include the planning and management of the scope of work, schedule, open items, documentation, and budget. Major Areas of Accountability: Provide direction and control for multi-disciplinary project teams. This includes all phases of the project from system design, integration, buy off/acceptance and factory installation Foster strong customer relationships through good communication throughout the project lifecycle. Update the customer as required on project progress, scope, open issues, schedule, and technical issues Prepare and maintain the project budget based on the quotation, any Engineering Change Orders (ECOs) and all customer Purchase Orders Prepare and maintain the project schedule - for both internal and customer use, including coordination of all CCI customer deliverables. Ensure that all project deliverables are complete and delivered as per schedule Assist department managers in manpower planning for their project(s) Monitor and maintain the financial success of the project by tracking all material and labor costs throughout the project lifecycle and adjusting as required Continually review scope of work for any possible risk items; develop, initiate, and monitor any risk mitigation plans Continuously monitor all project resources to ensure the project remains on target from a cost, scope, schedule, and technical perspective Monitor the procurement process to ensure that materials are delivered as per current project schedule Schedule and manage all design reviews to ensure that the work is executed in a timely fashion and that the resultant designs meet scope, cost, and schedule requirements Provide regular job status reviews to management Support the sales process for assigned accounts by interfacing with customers to clarify the RFQ and the resulting proposal in coordination with Outside Sales Provide support to the Applications Engineering group in developing proposals for assigned accounts, including defining the scope of effort and initial design concept. Education and Experience: Bachelor's Degree in an Engineering discipline and or equivalent experience A minimum of 2 years of relevant Project experience preferably in a test and development environment. Knowledge, Skills, and Abilities Required: Basic technical knowledge including broad understanding of electrical, software and mechanical engineering concepts Basic understanding of commercial aspects of contract engineering Proficient in influencing, negotiating and relationship building skills Good communication skills; able to articulate the benefits and preferences of each product Prioritization/organization of work and multi-tasking skills are critical to this position Capacity to deal with a high workload and under pressure of meeting deadlines Excellent listening, negotiation, and presentation skills Proficiency with Microsoft Office Suite Requires a strong initiative, proactive nature, and a sense of urgency Maintains confidentiality and security of intellectual property (CUI-ITAR, Prototype). Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 30 lbs. occasionally Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The salary range is $75,000 - $125,000. Compensation includes base salary and performance-based quarterly profit sharing. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to *******************.Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ******************* and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation.

About the job Who We Are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The Load and Wire Assembler is responsible for the loading and pre-assembling of test fixture plates for wire using manual tools with small interface pins and probes. This role ensures high-quality workmanship in the production of electronic assemblies. This position reports to the Load and Wire Supervisor and according to the FLSA (Fair Labor Standards Act) is classified as non-exempt. What You'll Be Doing Loads and pre-assembles fixture plates to get ready for wire using manual tools with small interface pins and probes, portable powered tools, or operating equipment as necessary to perform operations Solders connections Discusses concerns in diagrams or production order with supervisor or engineer to clarify loading and wiring discrepancies Performs quality check of own work and any related rework, involving supervisor and/or engineering as necessary Records all deviations and modifications from original design Completes all checklists prior to delivering test fixture Records time spent working on specific jobs Maintains and cleans work area and keeps tools/equipment in a clean and orderly condition and follows prescribed safety regulations Performs additional duties and tasks as assigned by Supervisors and/or Managers. What You Bring to the Table To perform this job successfully, you must be able to perform each essential duty satisfactorily, and regular attendance is required. The requirements listed below are representative of the knowledge, skill, and/or ability required to perform this job. Reasonable accommodation may be made to support individuals with disabilities. Required Ability to maintain a full time schedule High school diploma or equivalent Ability to learn specialized machines used during the fixture build Ability to read electrical schematics and assembly drawings to accurately locate and install probes and receptacles in fixture plates and interfaces Proven ability working with tools such as soldering irons, cutters, magnifiers, and microscopes Thorough understanding and adherence to safety and ESD procedures. Preferred Experience in a mid- to high-volume electronics manufacturing environment Ability to learn specialized machines. What to Expect at Work Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to support individuals with limitations. Ability to sit for extended lengths of time; bend, reach, stoop and twist as required Ability to lift and carry up to 20 lbs May involve repetitive tasks and extended periods of concentration Ability to use a microscope for prolonged periods of time Position requires close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus; the job requires long periods of time spent focusing on small components. Must have excellent natural or corrected vision. Working Environment The work environment characteristics described here are representative of those you may encounter while performing the essential functions of this job. Being present at work is critical to the success of this role Indoor climate controlled Works around equipment moving mechanical parts Regular exposure to manufacturing areas which may entail exposure to dirt, dust, noise, machine chemicals, fumes and other attributes common to this environment. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current base pay range for new hires is $18.00 - $22.00 per hour and is eligible for performance-based quarterly profit sharing. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with eight paid holidays. Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity- race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, arrest record or expunged or sealed convictions, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law.

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Primary Objective of Position: The Project Manager has the overall responsibility for the successful planning and execution of each project. They are the main customer contact throughout the project from the incoming order to post-delivery support and will be required to develop and maintain good working relationships both with the customer and between the various departments. This will include the planning and management of the scope of work, schedule, open items, documentation, and budget. Major Areas of Accountability: Provide direction and control for multi-disciplinary project teams. This includes all phases of the project from system design, integration, buy off/acceptance and factory installation Foster strong customer relationships through good communication throughout the project lifecycle. Update the customer as required on project progress, scope, open issues, schedule, and technical issues Prepare and maintain the project budget based on the quotation, any Engineering Change Orders (ECOs) and all customer Purchase Orders Prepare and maintain the project schedule - for both internal and customer use, including coordination of all CCI customer deliverables. Ensure that all project deliverables are complete and delivered as per schedule Assist department managers in manpower planning for their project(s) Monitor and maintain the financial success of the project by tracking all material and labor costs throughout the project lifecycle and adjusting as required Continually review scope of work for any possible risk items; develop, initiate, and monitor any risk mitigation plans Continuously monitor all project resources to ensure the project remains on target from a cost, scope, schedule, and technical perspective Monitor the procurement process to ensure that materials are delivered as per current project schedule Schedule and manage all design reviews to ensure that the work is executed in a timely fashion and that the resultant designs meet scope, cost, and schedule requirements Provide regular job status reviews to management Support the sales process for assigned accounts by interfacing with customers to clarify the RFQ and the resulting proposal in coordination with Outside Sales Provide support to the Applications Engineering group in developing proposals for assigned accounts, including defining the scope of effort and initial design concept. Education and Experience: Bachelor's Degree in an Engineering discipline and or equivalent experience A minimum of 2 years of relevant Project experience preferably in a test and development environment. Knowledge, Skills, and Abilities Required: Basic technical knowledge including broad understanding of electrical, software and mechanical engineering concepts Basic understanding of commercial aspects of contract engineering Proficient in influencing, negotiating and relationship building skills Good communication skills; able to articulate the benefits and preferences of each product Prioritization/organization of work and multi-tasking skills are critical to this position Capacity to deal with a high workload and under pressure of meeting deadlines Excellent listening, negotiation, and presentation skills Proficiency with Microsoft Office Suite Requires a strong initiative, proactive nature, and a sense of urgency Maintains confidentiality and security of intellectual property (CUI-ITAR, Prototype). Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 30 lbs. occasionally Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The salary range is $75,000 - $125,000. Compensation includes base salary and performance-based quarterly profit sharing. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to *******************.Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ******************* and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation.

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017