Civil engineer jobs in Wichita, KS - 66 jobs

Requirements In the process of receiving a bachelor's degree in civil engineering from an ABET accredited university. Previous civil engineering internships is preferred, but not required. Equivalent combinations of education and experience will be considered.

This Opportunity WSP USA hosts hundreds of internships across the United States to gain hands-on, meaningful work experience to enhance their education and professional aptitude. Our interns gain exposure to real projects while working side by side with senior staff. Through our Developing Professionals Network, interns gain mentorship, networking opportunities and lifelong career connections. Our Transportation team is seeking a Full-Time Civil/Roadway Intern to work out of our Wichita, KS office. The following locations will also be considered: Topeka, KS and Kansas City, KS. This temporary position is seeking individuals currently enrolled in an Undergraduate or Graduate degree program. This internship will be part of the WSP Summer Internship Program. As a summer intern, you have the opportunity to participate in our 12-week program scheduled to start on May 18th, 2026. The individual start date of the internship may be flexible. Your Impact + Support a variety of engineering tasks with the goal of developing technical, social, and ethical skills. + Learn basic principles of Civil Engineering. + Assist with project research, field work, and preliminary design calculations and analysis. + Support preparation of final design plans, special provisions, and cost estimates. + Assist in collecting and maintaining project documentation. + Complete training on assigned tasks. + Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. + Perform additional responsibilities as required by business needs. + Please note that there is no relocation or housing assistance associated with this internship. Who You Are **Required Qualifications** + Actively enrolled in an accredited Civil Engineering or closely related Undergraduate program with an anticipated graduation date of December 2026 or later. + Must be 18 or older. + Demonstrated interest in Transportation, Structural, or related field, and have a strong desire to advance skills related to WSP's work and projects. + Competent interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience. + Capable of taking direction from leadership, mentors, and managers to executive projects. + Basic proficiency with technical writing, office automation, software, spreadsheets, technology, and tools. + Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies. + Authorization to work in the United States at the start of the internship. **Preferred Qualifications** + Experience using Open Roads Designer. + Prior internship and leadership involvement on campus **About WSP** WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms. Dedicated to serving local communities, we are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper. *********** WSP provides a flexible and agile workplace model while meeting client needs. Employees are also afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings focused on providing health and financial stability throughout the employee's career. At WSP, we want to give our employees the challenges they seek to grow their careers and knowledge base. Your daily contributions to your team will be essential in meeting client objectives, goals and challenges. Are you ready to get started? WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status. The selected candidate must be authorized to work in the United States. **NOTICE TO THIRD PARTY AGENCIES:** WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation - no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

Senior Structural Design Engineer Location: On-site Wichita, KS | Salary: $115K - $145K + Benefits | Employment Type: Full-Time WHO WE ARE Altitude Aerospace delivers engineering and certification solutions for commercial and VIP aircraft programs worldwide. With FAA DER, EASA DOA, and TCCA DAO approvals, we support customers from concept through certification and in-service. Our 150+ person team across the US, Canada, and France works on programs for major OEMs and completion centers globally. We offer 100% employer-paid medical, dental, and vision insurance, SIMPLE IRA retirement plan, paid vacation and PTO, and 8 paid holidays. THE ROLE Support business jet manufacturing and modification programs as the technical lead for structural support. Work directly with production to resolve build issues, disposition non-conformances, and design structural solutions for flight test and Special Missions programs. Drive MRB dispositions, author temporary engineering, and coordinate with design, manufacturing, and quality teams to maintain schedules and ensure airworthiness. WHAT YOU'LL DO Design & Problem Solve Troubleshoot design and build issues, develop structural and installation solutions, and release required engineering. Troubleshoot design and build issues, develop structural and installation solutions, and release required engineering. Disposition non-conformances with clear MRB-level rework instructions that manufacturing teams can execute. Investigate aircraft drawings and coordinate with design, stress, quality, and manufacturing to resolve interface challenges. Prepare temporary engineering, special instructions, and installation engineering for production support. Lead & Coordinate Lead structural and systems design changes for Flight Test and Special Missions programs. Work cross-functionally with design, stress, certification, and production teams to keep programs moving forward. Act as the structural engineering authority for production build issues requiring immediate resolution. Impact: Your designs and decisions directly affect aircraft airworthiness and production timelines. You'll work on active business jet programs with firm delivery commitments. WHAT YOU BRING Bachelor's in Mechanical or Aeronautical Engineering 10+ years in structural design and manufacturing support for aerospace programs Expert CATIA V5 user with strong assembly design and production experience Required experience in Special Missions or aftermarket modifications, manufacturing support, and team leadership Strong understanding of aircraft structures, MRB processes, and engineering change management Clear communicator who can work independently and coordinate across disciplines Proficiency with MS Office and engineering documentation tools PREFERRED Deep CATIA V5 workbench capability across multiple design disciplines Siemens NX and Teamcenter experience Business jet or wide body commercial aircraft platform experience Composite and metallic structure design background WHY ALTITUDE Real Programs: Work on active business jet manufacturing programs with firm delivery schedules, not theoretical studies Variety: Exposure to Special Missions, VIP completions, and OEM manufacturing programs across multiple platforms Impact: Be the structural authority making critical engineering decisions that keep aircraft flying and production moving Growth: Small enough to take ownership of significant work packages, large enough for international project exposure CONDITIONS OF EMPLOYMENT This is an on-site position in Wichita, Kansas Background check and drug screen may be required ITAR eligibility required (U.S. Citizen or U.S. Permanent Resident status) Altitude Aerospace is an equal opportunity employer.

Job Description The Design Engineer will be responsible for design on multiple projects, working with other design disciplines internal and external to PEC to develop engineering solutions for PEC's Clients. This position will be responsible for preparing design deliverables for a variety of projects while maintaining PEC's standard of excellence. This position utilizes BIM/CAD software, hand calculations, and computer-based calculations. Duties and Responsibilities: Performs engineering design, coordinates with other design staff for construction document and specification production in compliance with building codes, construction administration, and development of reports/studies. Performs tasks during construction administration including review of submittals, site investigations, and RFI response under the direction of the Project Engineer. Performs design and takeoff computations by hand and by computer software. Organizes multiple projects and tasks and completes them in a timely manner, on schedule, and per PEC Standards. Organize project information and files according to corporate standard practices and workflows. Effectively communicates and coordinates with the Design Team to complete design tasks on numerous projects. Other projects and responsibilities may be added at the company's discretion. Special Knowledge, skills and abilities: Ability to work independently and with others. Excellent oral, written, and interpersonal communication skills. Strong work ethic Experience with computer aided drafting and modeling using industry accepted software Experience with codes and regulations, interpreting plans, and design of discipline Education and Experience: Bachelor's degree in an appropriate field of study from an ABET Accredited University is required. License and Certification: Engineer in Training Certification preferred Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A PEC is an AA/EEO/Veteran/Disabled employer.

Join Rimkus and unlock your potential with endless opportunities for growth, learning, and making a difference! Rimkus (*************** is a worldwide leader in Engineering and Technical Consulting. Rimkus experts specialize in building envelope engineering, forensic consulting, dispute resolution, construction management services, and solutions built for the environment. NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a full benefits package that includes medical, dental, vision, life, disability, employer-matching 401(k), and opportunities for advancement! Overview: Provides forensic consulting services requiring civil/structural engineering expertise for insurance, legal, industrial, and other clients. Assesses and determines the cause and origin of structural failures and/or damage, building envelope failures and/or damage, and construction defects, as well as determines the extent and repairability of such failures and/or damage. Provides oral and written reports of findings and, when needed, expert testimony. Manages multiple projects. Essential Job Functions: * Performs the investigation and analysis of residential, commercial, and industrial properties to resolve claims and legal matters. * Performs forensic assignments within the field of civil/structural engineering expertise based upon a scope of work and budget prepared by the consultant and agreed upon by the client in advance of performing the work. * Field Investigations: Study and determine the cause and origin of construction defects or structural failures and/or damage and building envelope failures and/or damage, as well as determine the extent and repairability of such failures and/or damage. This includes gathering photographic evidence, conducting on-site investigations to document conditions, conducting in-person and/or telephone interviews, overseeing field testing, reviewing construction and/or design drawings, contracts, and/or specifications, and reviewing historical documentation. * Preparation of oral and written reports to document the causes of failure and/or damage, extent of loss, associated repair scope, and recommended remediation is essential, as is providing opinions and expert testimony in litigation matters. * Manages multiple projects, coordinating with other experts and supporting as needed to produce client reports promptly. * Ensures that the procedure is followed and performs safety and due diligence of the project when it is being completed. * Ability to initiate, develop, and maintain mutually beneficial client relationships. Required Experience, Education, and Certifications: * Civil or Structural Engineering degree or higher. * A P.E. license is required in the state of employment, or the ability to obtain it quickly in Kansas and Missouri. * NCEES record preferred. * 5+ years of experience. * Project Management and/or Field Investigation preferred. * Depending on location, other licenses or certifications may be required. Required Skills and Abilities * Must have strong verbal and written communication skills. * Must have strong organizational and time management skills. * Must have a high level of analytical skills. Work requires continual attention to detail with the ability to define problems, collect data, establish facts, and draw valid conclusions. * Must be able to interact and communicate with clients at all levels (e.g., internal and external). * Must know a variety of computer software applications, including but not limited to Microsoft Office applications and computer-assisted engineering and design software. * Ability to read, analyze, and interpret standard scientific and technical reports or journals, financial reports, and legal documents. * Ability to write scopes of work, budget estimates, schedules, reports of findings, proposals, general correspondence, and other technical documents. * Ability to respond to inquiries from internal and external clients. Capable of effectively presenting information to top management, clients, public groups, and/or boards of directors. Physical Demands, Overtime, and Travel Requirements Physical Demands-Work is performed both in an office setting and at outside locations (i.e., client's office, industrial, construction, and/or residential sites). The employee is frequently required to stand, walk on sloped roofs, sit, climb ladders, bend, climb inside attics, crawl under homes and tunnels, balance, stoop, kneel, crouch, talk, hear, use handheld equipment and/or tools, and drive a motor vehicle to job sites. Employees may lift and/or move up to 50 pounds. Employees must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in a deposition or trial. Clear vision and depth perception are also necessary. Overtime-This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with a one-hour lunch break. There will be periods when overtime will be required, which the employee must comply with to meet the demands of the position. Travel Requirements-This position requires up to 50% local/regional travel. Less than 5% of travel may be required outside of the area and overnight. This position is located in Kansas City or Wichita. At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-JD1 #LI-HYBRID

_When applicable, Bombardier promotes flexible and hybrid work policies._ **Why join us?** At Bombardier, we design, build and maintain the world's peak-performing aircraft for the world's most discerning people and businesses, governments and militaries. We have been successful in setting the highest standards by putting our people at the heart of it all, and defining excellence, together. Working at Bombardier means operating at the highest level. Every day, you are part of a team that delivers superior experiences and products, pushing the boundaries of what's possible in our industry and beyond. By prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms, because the best work happens when you are free to be yourself and share your unique expertise. **What are your contributions to the team?** - Investigate design build issues and develop structural engineering and instrumentation installation solutions - Author temporary engineering to resolve build issues in a timely manner - Dispositioning aircraft non-conformances including rework instructions. (MRB) - Perform aircraft and engineering drawing investigation and coordination with affected engineering disciplines, Quality Assurance and operations manufacturing representatives. - Design Flight Test engineering change requests and coordinate with work package owners - Author engineering to define structural special instructions or restrictions - Design and Release Special Missions Engineering structural and systems installations **How to thrive in this role?** - You must have a Bachelor's degree in Mechanical/Aeronautical Engineering or a related discipline from an accredited University. - You must have a minimum of 10 years industry experience - Per US ITAR (International Traffic in Arms Regulations) Requirements, must be a U.S. Citizen or U.S. Permanent Resident (Green Card Holder). - Experience in Special Missions or Aftermarket modifications is required. - Experience supporting manufacturing and aircraft modifications is required. - Experience of leading a team of engineers is required. - You must have a minimum of 15,000 hours on CATIA V5. - Proficient in CATIA V5 Workbenches: Assembly Design, Part Design (Boolean Operations), Aerospace Sheetmetal, Tubing Design, Kinematics and Electrical Harness Routing are a plus. - Experience in Siemens NX is a plus. - Experience in Teamcenter PLM is a plus. - You must have excellent verbal and written communication skills. - You must be a highly motivated, self-starter. - You must have proficiency with MS Office tools, Excel, Word, and PowerPoint. All other computer systems and software are a plus. - Any aircraft or manufacturing experience is a plus - Experience in Special Missions or Aftermarket modifications is a plus **Now that you can see yourself in this role, apply and join the Bombardier Team!** Bombardier is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by Federal, National, or Local Laws. **Job** (CONTRACT) Senior Structural Design Engineer - Wichita **Primary Location** Wichita, ADMN / MFG, Learjet **Organization** Learjet Inc **Shift** **Employee Status** Non-Employee **Requisition** 10211 (CONTRACT) Senior Structural Design Engineer - Wichita

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description We are seeking a Structural Design Engineer to apply engineering and physical science principles, materials knowledge, and design tools in a collaborative environment. The engineer will develop, integrate, document, and evaluate flight vehicle structure designs, ensuring performance, functional adequacy, cost-effectiveness, manufacturability, and compliance with customer and regulatory requirements. Areas of focus may include primary and secondary structures, payload design, weight analysis, and lofting. Key Responsibilities: Develop and evaluate flight vehicle structural designs for performance, cost, and manufacturability. Collaborate with cross-functional teams on design, integration, documentation, and compliance. Apply metallic structural design expertise. Utilize CATIA and Boeing design processes; ENOVIA experience preferred. Support Boeing or Spirit commercial aircraft programs, with emphasis on primary structures. Contribute to product development, new design efforts, and post-delivery evaluations. Qualifications Bachelor's degree in Engineering required; engineering degrees strongly preferred over drafter/technical designer backgrounds. 5-10 years of experience as structural design engineer Experience with primary/secondary structures, payloads, lofting, and weight analysis. Commercial OEM experience preferred (Boeing, Airbus, or Spirit AeroSystems). Strong collaboration, communication, and documentation skills. Preferred: Broad experience in aerospace structures, product development, and new design. Proficiency with CATIA, ENOVIA, and Boeing design processes. Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon. Interview with the Hiring Manager Offer Letter: We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge!

The Design Engineer is responsible for creating, developing, and optimizing products or systems using engineering principles. They collaborate with cross-functional teams to ensure functionality, performance, and manufacturability. The role is crucial in transforming concepts into innovative and efficient solutions. Key Responsibilities: · Design and develop parts or assemblies based on client requests and in compliance with client and industry standards for primary and secondary structural elements of aircraft. · Modify or create 3D models of parts or assemblies. · Develop and interpret drawings, and technical specifications for various parts or assemblies. · Correct and incorporate changes into technical drawings. · Standardize 3D models and drawings according to client and industry standards. · Analyze submitted modification requests. · Research technical specifications when not provided by the client. · Identify root causes and resolve issues. · Provide technical support to production and engineering teams. · Assist in drafting quality procedures. · Share technical knowledge with team members. · Understand AS 9100 standard requirements related to the responsibilities of this position. · Adhere to the company's QMS procedures and apply tools when performing tasks · Any other related tasks Requirements Skills: · Ability to work effectively in a team and communicate efficiently. · Strong sense of responsibility for assigned tasks. · Must have strong analytical skills. · Ability to manage responsibilities and adapt to workflow. · Must demonstrate adaptability in a dynamic environment. · Ability to take initiative. Qualifications: · 2 to 11+ years of relevant professional experience. · Bachelor's degree in mechanical engineering or other related field or college diploma with 2 years' experience. · Experience in the primary and secondary structural elements of aircraft is an asset. · Proficiency in MS Office Suite (Word, Outlook, Excel, and PowerPoint). · Proficiency in design and modeling software (CATIA V5 preferred but other software will be considered).

Click on "Learn more about this agency" button below for IMPORTANT additional information. Click on "Learn more about this agency" button below for IMPORTANT additional information. Accepting applications Open & closing dates 12/22/2025 to 12/21/2026 Salary $74,678 to - $192,331 per year Pay scale & grade GS 11 - 15 Locations Few vacancies in the following locations: Eielson AFB, AK Elmendorf AFB, AK Fort Richardson, AK Little Rock AFB, AR Show morefewer locations (88) Davis Monthan AFB, AZ Davis Monthan AFB, AZ Luke AFB, AZ Beale AFB, CA Edwards AFB, CA El Segundo, CA Los Angeles, CA March AFB, CA Travis AFB, CA Vandenberg AFB, CA Air Force Academy, CO Buckley AFB, CO Cheyenne Mountain AFB, CO Colorado Springs, CO Peterson AFB, CO Schriever AFB, CO Joint Base Anacostia-Bolling, DC Dover AFB, DE Cape Canaveral, FL Cape Canaveral AFS, FL Eglin AFB, FL Homestead AFB, FL Hurlburt Field, FL MacDill AFB, FL Patrick AFB, FL Tyndall AFB, FL Dobbins AFB, GA Moody AFB, GA Robins AFB, GA Hickam AFB, HI Pearl Harbor, HI Mountain Home AFB, ID Scott AFB, IL Grissom AFB, IN McConnell AFB, KS Barksdale AFB, LA Hanscom AFB, MA Westover Air Reserve Base, MA Andrews AFB, MD Linthicum Heights, MD Selfridge ANG Base, MI Whiteman AFB, MO Columbus AFB, MS Keesler AFB, MS Malmstrom AFB, MT Pope AFB, NC Seymour Johnson AFB, NC Grand Forks AFB, ND Minot AFB, ND Offutt AFB, NE Fort Dix, NJ Lakehurst, NJ McGuire AFB, NJ Cannon AFB, NM Holloman AFB, NM Kirtland AFB, NM Nellis AFB, NV Niagara Falls, NY Wright-Patterson AFB, OH Youngstown, OH Youngstown, OH Altus AFB, OK Tinker AFB, OK Vance AFB, OK Greater Pittsburgh Airport, PA Pittsburgh, PA Charleston AFB, SC Shaw AFB, SC Ellsworth AFB, SD Arnold AFB, TN Dyess AFB, TX Fort Sam Houston, TX Goodfellow AFB, TX Kelly AFB, TX Lackland AFB, TX Laughlin AFB, TX Randolph AFB, TX San Antonio, TX Sheppard AFB, TX Hill AFB, UT Alexandria, VA Arlington, VA Dahlgren, VA Fort Eustis, VA Langley AFB, VA Pentagon, Arlington, VA Fairchild AFB, WA Warren AFB, WY Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Multiple Work schedule Full-time Service Competitive Promotion potential 15 Job family (Series) * 0810 Civil Engineering Supervisory status No Security clearance Secret Drug test No Position sensitivity and risk Noncritical-Sensitive (NCS)/Moderate Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status No Announcement number AFPC-STEMDHA-12*********** Control number 853061700 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency This public notice is to gather applications that may or may not result in a referral or selection. Duties Help * Duties and responsibilities vary and may increase according to grade level * Perform operation and maintenance involving design and construction that encompasses the maintenance, repair, upgrade and operation of infrastructure facilities, including utility systems, utilizing a professional knowledge of civil engineering. * Monitor/manage construction projects for new construction, renovations and improvements to real property facilities from start to finish including the performance of preconstruction site surveys all the way to completion to as-built drawings. * Provide civil engineering assistance on solving current job problems and in-shop planning. * Prepare and/or provide technical review of design calculations, analyses, drawings and specifications to ensure compliance with project requirements. Requirements Help Conditions of employment * Please read this Public Notice in its entirety prior to submitting your application for consideration. * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * Total salary varies depending on location of position * If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: ***************************************** * Recruitment incentives may be authorized * Position may be subject to random drug testing * Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays * Shift work and emergency overtime may be required * Employee must maintain current certifications * A security clearance may be required * Disclosure of Political Appointments is required * Full/part-time employees occupying direct childcare positions are eligible for discounts IAW DAF AFSVC/CC Memo, 30 Sep 22; first child 100% / each additional child 25%. Other assigned CYP and FCC personnel are eligible for 25% discount. * This Public Notice may be used to fill positions in other equivalent pay systems (i.e., NH, NJ, NK). Qualifications In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Professional and Scientific Positions. BASIC REQUIREMENT: Degree: Professional Engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional Registration: Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test: Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified Academic Courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum. 4. Related Curriculum: Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. IN ADDITION TO MEETING THE BASIC REQUIREMENTS ABOVE APPLICANTS MUST ALSO MEET THE QUALIFICATION REQUIREMENTS LISTED BELOW: SPECIALIZED EXPERIENCE: GS-11: Applicants must possess one year of specialized experience to at least the (GS-09) grade level under the General Schedule (GS) or other pay systems. Examples of specialized experience performing such duties as participating in design work for new construction, renovations, and improvements to real property facilities, including utility systems, small, routine projects or portions of large, complex projects; analyze programmed projects for development of design criteria, participate in technical review of design calculations, analyses, drawings, and specifications; prepare project time schedules and costs estimates; prepares or participates in the preparation of architect and engineer (A&E) statements of work; reviews A&E design calculations, costs estimates, analyses, drawings and specifications to ensure compliance with project requirements; and use computer/computer aided software, etc., to solve engineering problems OR 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. GS-12: Applicants must possess one year of specialized experience to at least the (GS-11) grade level under the General Schedule (GS) or other pay systems. Examples of specialized experience such as performing duties as provide project management services for infrastructure maintenance, construction, and improvements for a diverse industrial complex or military installation or comparable entity including substantial multi-phase new construction, renovation, and improvement projects for a variety of real property facilities; plan projects that involve substantial infrastructure maintenance and improvements; etc. GS-13: Applicants must possess one year of specialized experience to at least the (GS-12) grade level under the General Schedule (GS) or other pay systems. Examples of specialized experience such as performing duties that demonstrate my ability to produce detailed designs, drawings, and construction documentation; originate, assess, and provide advice on concrete and reinforcing designs, engineering drawings, hydraulic designs, and soil and foundation mechanics; negotiate cost of minor changes with contractor representatives; and anticipate, evaluate, and resolve problems and issues affecting the quality, scheduling, budgeting, or progress of work performed in completing projects; etc. GS-14: Applicants must possess one year of specialized experience to at least the (GS-13) grade level under the General Schedule (GS) or other pay systems. Specialized experience is performing duties such as the design, review and/or approval of all civil design features of assigned civil works and/or military projects; preparation of feasibility and engineering studies, site plan, provide advice and guidance on diversified engineering problems and technical expertise covering modifications, review and interpret engineering data, criteria, and higher headquarters policy and regulations pertinent to civil engineering designing and construction etc. GS-15: Applicants must possess one year of specialized experience to at least the (GS-14) grade level under the General Schedule (GS) or other pay systems. Specialized experience is having working knowledge of related scientific and engineering fields such as civil, structural, mechanical, and materials, capable of applying new developments and experienced judgement to solve novel or obscure problems; ability to extend and modify existing techniques; and ability to develop new approaches for use by other technical experts in providing structurally sound an secure facilities and infrastructure to protect and support military forces. Click on the following link to view occupational requirements for this position: **************************************************************************************************************************************************** Education KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of civil engineering concepts, principles and practices a familiarity with other engineering disciplines and architecture. 2. Ability to analyze, interpret and apply general engineering rules and procedures in a variety of situations and recommend effective solutions to senior engineers. 3. Knowledge of engineering and construction standards, methods, practices and techniques materials and equipment to determine compliance with federal, state and local codes and regulations. 4. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders. 5. Ability to provide policy guidance for, and advice on, the design, fabrication, materials used, and construction of structures worldwide. 6. Skill in providing engineering advice to solve critical problems in the remediation and cleanup of properties contaminated with hazardous materials IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Additional information For Direct Hire (DHA) Positions: This is a Direct Hire Public Notice, under this recruitment procedure applications will be accepted for each location/ installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. Interagency Career Transition Assistance Program (ICTAP): For information on

JOB TITLE: Structural Design Engineer 3 PAY RATE: $61/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Apply engineering and physical science principles, materials knowledge, and tools in a collaborative environment to develop, integrate, document, and evaluate flight vehicle structures for performance, functional adequacy, cost-effectiveness, manufacturability, and regulatory compliance. Areas of expertise may include: Primary and secondary structure design Payloads design, weights, and lofting Metallic fuselage structures Requirements: Bachelor's degree in Engineering required; aerospace/structural engineering preferred Recent commercial structures experience (within the last 10 years) with primary structures focus Experience with commercial OEM programs Proficiency in CATIA, ENOVIA, and Boeing design processes Experience in metallic design, aero structures, product development, and new design Applicants with engineering degrees preferred over drafter/tech designer backgrounds Must be a U.S. Citizen (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today! Engineers - #Hotjobs

Under the supervision of the City Engineer, the Civil Engineer performs administrative and professional engineering duties associated with the Engineering Division. The employee in this position is responsible for the supervision of the development of designs, plans and specifications for city public works projects. The position will supervise contract administration, construction and major maintenance work requiring engineering review. Essential Functions Develops plans, designs, and specifications for city public works projects; Supervises contract administration and construction inspection of city public works projects; Prepares and updates City construction specifications and design standards; Prepares cost estimates of proposed public works projects; Prepares Requests for Proposals for various public projects; Assists with GIS Mapping tasks; Interprets Subdivision Regulations and City Code and communicates such with developers and citizens; Interprets MUTCD and traffic engineering data & performs traffic engineering analysis of local conditions, including temporary traffic control for construction & maintenance projects; Gives technical advice concerning engineering of construction and maintenance projects for other divisions and departments; Reviews development plats and construction drawings for compliance with city regulations; Maintains bridge files and manages necessary repairs and replacement; Writes technical reports and analyzes data; Provides public presentations as needed; Reviews Drainage Plans and Storm Water Pollution Prevention Plans; Assists with preparation of the City's Capital Improvement Program and maintenance of the CIP documents; Assists with compliance of City Storm Water Management Plan for NPDES permit. Marginal Functions Assists with department budgeting; Other related duties as deemed necessary or required. Experience: Minimum of 2 years as a professional engineer in a technical and administrative capacity similar to or of a municipal public works nature. Employee is expected to have acquired the necessary information and skills to perform the job reasonably well after one year in the position. Education: College degree in Civil Engineering. Certifications/Licenses: Possession of a valid driver's license is required; Registered Professional Engineer in the State of Kansas is preferred. The following certifications must be obtained within 1 year of employment: KDOT Construction Stormwater Training, KDOT Inspector Training, KDOT Traffic Control Inspection Training, KDOT Utilities Field Training. Additional education or certification as approved or determined by the department head could result in a regular stipend to employees' salary. Skills: Thorough knowledge of principles and practices of civil engineering. Thorough knowledge of federal, state and city codes, laws, rules, and regulations relative to municipal public works. Ability to prepare clear and concise reports. Ability to operate survey equipment. Problem Solving: Frequent problem solving exists in this position. Problems include design and planning of municipal public works projects, working with contractors and property owners during construction of public works projects. Decision Making: Frequent decision making in determining technical decisions and engineering problems and construction computations, estimates, designs, plans, and specifications. Accountability: Employee is responsible for assuring compliance with plans, specifications, and codes and does participate in the annual department budget process. Supervision: Supervision is provided by and job-related decisions are reviewed by the Director of Public Works. Employee has supervisory responsibility over subordinate technical and semi-skilled personnel. Personal Relations: Frequent contact with other city employees, contractors, engineers, and the public. Working Conditions: Adverse conditions may exist during on-site review of public works projects. Physical Requirements: The City Engineer's physical job demands require Occasional Bend/Crouch; Occasional Climb up to 24 inches; Occasional Foot Coordination; Frequent Hand Coordination; Occasional Lift of up to 50 lbs from Floor to Waist; Occasional Neck Extension; Occasional Neck Flexion; Occasional Neck Rotation; Occasional Forward Reach; Frequent Sit; Frequent Stand; Frequent Walk. Refer to Job Analysis. PDC Level: Heavy This description should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of this job. The incumbents may be requested to perform job-related responsibilities and tasks other than those stated in this specification.

**Senior Structural Design Engineer - Lead the Future of Aviation** **Pay Rate:** $65.00-$95.00 **Contract Duration:** 12-18 months **About the Role** As a **Senior Structural Design Engineer at PDS Tech Commercial** , you'll play a critical role in designing and implementing structural solutions for advanced business jets and specialized mission platforms. Your expertise will help resolve complex build issues, support flight test programs, and deliver engineering excellence that shapes the future of aviation. **Key Responsibilities** + Investigate design-build issues and develop structural engineering and instrumentation installation solutions. + Author temporary engineering instructions to resolve build issues promptly. + Disposition aircraft non-conformances and provide rework instructions (MRB). + Collaborate with engineering disciplines, Quality Assurance, and manufacturing teams to resolve drawing and build discrepancies. + Design and release structural and systems installations for Special Missions Engineering. + Define structural special instructions or restrictions for flight test and mission-critical modifications. **Required Qualifications** + Bachelor's degree in Mechanical/Aeronautical Engineering or related field. + Minimum 10 years of industry experience. + U.S. Citizen or Permanent Resident (ITAR compliance). + Expertise in Special Missions or Aftermarket modifications. + Proven leadership experience managing engineering teams. + **Minimum 15,000 hours on CATIA V5** with proficiency in: + Assembly Design + Part Design (Boolean Operations) + Aerospace Sheetmetal + Tubing Design + Strong communication skills and proficiency in MS Office tools. **Preferred Qualifications** + Experience with Kinematics and Electrical Harness Routing in CATIA V5. + Siemens NX and Teamcenter PLM experience. + Background in aircraft manufacturing or modification programs. **Why Join Us?** + Work with a **global leader in aviation** known for innovation and excellence. + Be part of a **people-driven culture** that values diversity, authenticity, and growth. + Competitive pay and long-term stability with a 12-18 month contract. + Opportunity to **shape the future of aviation** through cutting-edge projects. **Ready to Take Off?** Apply now and bring your expertise to a team that's redefining what's possible in aviation. **Your next career milestone starts here!** This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. **Pay Details:** $80.00 to $95.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ***************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Commercial Aircraft is looking for Static Stress & F&DT Structure Engineers to join our Engineering department based in Wichita, Kansas. You will be part of a team that supports the development of aircraft structures as a Static Stress or F&DT analyst. Duties include performing complex static or F&DT analysis for both metallic and non-metallic parts while working in close collaboration with design colleagues to provide quality solutions. Methods include the use of both classical hand calculations and computer techniques to develop high strength to weight ratio structures. Meet the team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your working environment: Located on the Wichita State University (WSU) innovation campus is Airbus' first dedicated engineering facility outside of Europe. Our team of 200+ support staff and engineers focus on aerostructure design including analysis of aircraft primary structures, such as wings and fuselages, for all major Airbus products across the globe. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Work on unusually complex technical problems and provide solutions which are highly innovative and ingenious. Document analyses in support of trade studies or detail drawing sign-off for airframe structure. Collaborate with other (internal/external) technical departments to solve complex technical problems. Develop advanced technological ideas and guide their development into a final product. Mentor less experienced structural analysts and provide leadership and guidance of a highly complex range of problems. Lead aspects of major projects successfully. Set broad objectives with timelines and establish the tasks required and how they should be completed. Demonstrate a high level of listening and speaking capabilities with all levels of management, internal and external. Determine and pursue courses of action necessary to obtain desired results. Your boarding pass: Bachelor of Science (BS) Degree in Engineering (Aero, Civil, or Mechanical) with a strong curriculum emphasis on structural design and analysis, and/or mechanics of materials Minimum 12 years total structure analysis experience in analysis of primary airframe structures. Experience in composite aircraft structure (airframe) In-depth knowledge of classical and numerical (Finite Element) stress analysis methods. A strong computer background, including MS Office application experience (Outlook, Excel, Word, PowerPoint) and Google Suite application experience (Docs, Sheets, Slides, Gmail). Authorized to Work in the US Prefer experience with A350, A220 Pylon or other Airbus commercial aircraft. Physical Requirements: Onsite or remote: Onsite 90% Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: able to speak in conversations and meetings, deliver information and participate in communications. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. Sitting: able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Standing: able to stand for discussions in offices or on the production floor. Travel: able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Structure & Dynamic Systems Analysis ------ ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

**The 'Apply with SEEK option' will be utilized for International applicants, mainly Australia. If this does not apply to you please use the 'Apply' option.** IF YOU CARE, THERE'S A PLACE FOR YOU HERE EFI Global is a full-service engineering, fire investigation, environmental, health and safety, and specialty consulting services firm serving a variety of industries in both the public and private sectors. Over the last four decades, we have grown from a boutique firm specializing in handling insurance fraud and arson cases and providing expert witness testimony, into a recognized global leader in engineering failure analysis, origin-and-cause investigations, environmental consulting, laboratory testing and specialty consulting. Our forensic investigation, engineering and environmental services teams around the world share a dedication to expertise, quality and demonstrating to customers that caring counts . Each of our more than 700 professional engineers, fire investigators, architects and scientists was selected for their technical proficiency, in-depth industry knowledge and commitment to professional integrity. Together, our diverse backgrounds and collective insights empower clients to make better-informed business decisions. EFI's combination of global solutions and local expertise has earned the firm a reputation for delivering timely responses that consistently meet our clients' expectations-anytime, anywhere. Click here to learn more about EFI Global. **Are you a seasoned Structural Engineer with a passion for uncovering the root causes of structural failures and a talent for delivering expert assessments? We are seeking a dedicated professional to join our team, specializing in forensic engineering, structural damage assessment, and failure analysis across commercial, residential, and industrial buildings. The ideal candidate will bring hands-on experience in determining causes of structural failure, storm and roof damage assessments, building envelope investigations, and evaluating structural collapses. A Professional Engineer (PE) license in your state of residence is required. If you thrive in a dynamic environment and are committed to excellence in structural diagnostics, we invite you to explore this exciting opportunity.** **This is a remote role** working from a home-based office. Requires working in a variety of environments and a combination of travel (local or regional). **Prefer candidate reside in greater Wichita, Topeka, or Kansas City, KS area** **PRIMARY PURPOSE** **: To investigate events, systems, devices and/or failures and provide expert opinions; to provide guidance and leadership ethically and scientifically on complex engineering assignments; to contribute to overall profitability of the company through providing expert/engineering consulting services.** **Are You An Ideal Candidate?** **We are looking for enthusiastic candidates who thrive in a collaborative environment, who are driven to deliver results, are customer oriented and naturally empathetic.** **Apply your engineering knowledge and experience to investigate and assess complex failures in the context of an energetic, people focused, entrepreneurial culture.** **Deliver comprehensive engineering analyses to clients who represent virtually every industry and comprise some of the world's most respected organizations.** **Leverage EFI Global's broad, global network of experts to both learn from and to share your insights.** **Be a part of a rapidly growing, industry-leading global company known for its excellence and customer service.** **Take advantage of a variety of professional development opportunities that help you perform your best work and grow your career.** **Enjoy flexibility and autonomy in your daily work, your location, and your career path.** **Access diverse and comprehensive benefits to take care of your mental, physical, financial, and professional needs.** **ESSENTIAL RESPONSIBLITIES MAY INCLUDE** **Determine of the origin and cause, and extent of structural failures of roof damage, water intrusion, post-fire damage, storm damage assessments, structural integrity evaluations, structural collapse, building system failures, foundation/settlement, product liability, and construction defects.** **Surveys losses and loss scenes at residential and commercial buildings** **Conducts investigations to determine and document the scope of damage caused by a recent acute event.** **Investigates and assesses damages due to failures and determines the origin of failure for insurers and litigation support.** **Analyzes and documents the failure analysis and causation of failures.** **Collaborates with other investigators to produce detailed reports outlining the cause and origin of losses and damages.** **Serves as an expert witness in court and/or in depositions.** **Documents and maintains billable hours on a time and expense basis for failure analysis and forensic engineering projects for clients.** **Education and Licensing:** **Requires Bachelor of Science degree in Engineering from an accredited college or** **university.** **Requires a Professional Engineering (PE) license, minimum required for resident** **state. Prefer** **multi-state licensing and/or active NCEES Record.** **Expert witness testimony experience is a plus.** **Taking Care of You:** **Craves cutting-edge opportunities** **Supporting meaningful work that promotes critical thinking and problem solving.** **Thrives when allowed flexibility and autonomy** **Strong team and customer service orientation** **Seeks to contribute to a larger purpose ** **Craves culture of support, both giving and receiving** **We offer a diverse and comprehensive benefits including medical, dental vision, 401K, PTO and more beginning your first day.** ** ** **NEXT STEPS** **If your application is selected to advance to the next round, you will receive an e-mail notification or phone call from a recruiter to schedule an initial call.** \#LI-SC2 #LI-Remote **\#ForensicEnginner #ForensicStructuralEngineer #FailureAnalysis, #StructuralDamage #EngineeringJobs.** The statements contained in this document are intended to describe the general nature and level of work being performed by a colleague assigned to this description. They are not intended to constitute a comprehensive list of functions, duties, or local variances. Management retains the discretion to add or to change the duties of the position at any time. Sedgwick is an Equal Opportunity Employer and a Drug-Free Workplace Our business is founded on people with the best technical skills and outstanding industry knowledge and we strive to employ and retain exceptional talent. EFI Global is an equal opportunity employer welcoming applications from all qualified persons. If you are interested in working for us, please visit our job board.

At MKEC, it's all about our team. We're passionate about our mission of providing superior engineering solutions that are responsive to our clients' needs. Since our start in 1982, our growth has been fueled by respect for each other and a shared commitment to achieving our goals. We're looking for a Structural Engineer to join our Architectural Engineering team at our Wichita location (in office). This individual will assist with the design of a variety of projects that may include schools, churches, hospitals, hotels, office buildings, and other commercial and industrial projects. Responsibilities: Assist with the design and production of detailed design drawings, electronic models, specifications, written reports, and site observation reports. Complete structural calculations with different design materials, specifically with steel and concrete. Assist in the selection of the appropriate building materials. Prepare and assist with project proposals, interviews, and client presentations. Attend client meetings to ensure the design meets their needs and objectives. Provide leadership, guidance, and instruction to production staff. Requirements: B.S. in Civil/Structural or Architectural Engineering from an ABET-accredited program. 3-6 years of relevant experience. PE license in Kansas is preferred (or on track to obtain a PE license). Familiar with Structural Drafting software (AutoCAD, Revit, etc.). Proficient in Structural Analysis software (RISA, STAAD, Enercalc, etc.) Proficient in Microsoft Office (Outlook, Word, Excel). Highly organized, self-motivated, and able to handle multiple project tasks. Excellent presentation, written communication, time management, and organizational skills are required. Ability to work under pressure, be self-directed, exhibit good business judgment, and handle confidential information appropriately. Compliance with MKEC and client drug/alcohol and safety programs. Benefits: MKEC offers a competitive compensation package in addition to the following benefits: Group Health Plan Dental Plan Paid Time Off (PTO) Paid Holidays Disability Insurance - Short & Long-Term Life Insurance / AD&D Flex Spending Account 401k Retirement Plan Profit Sharing Plan YMCA Discounted Membership Company Culture at MKEC: We enjoy the work we do. Our projects have taken us far and wide, and we're always ready to tackle any challenge that comes our way. Driven by our love for problem solving, we're dedicated to delivering creative solutions. We value each other. With expertise in nearly every field, we appreciate the diverse skills and experiences each team member brings to the table. We're all about learning from one another and working together to serve our clients better. We love to give back. We're actively involved in the communities we serve, always on the lookout for ways to give back. From mentoring students at a local elementary school, to hosting food drives, and sponsoring events, we're committed to helping the communities we work and live in. MKEC is an Equal Opportunity Employer. MKEC is currently not offering sponsorship now or in the near future.

Program / Project Engineering Support Introduction Are you an experienced Program or Project Engineering professional ready to make an impact in the aerospace industry? Expleo Group USA is seeking a seasoned expert to join our client's team in Wichita, KS. This is your chance to work on cutting-edge projects supporting Boeing, where your leadership and technical expertise will drive success in complex engineering programs. What's in It for You? High-Impact Role - Play a critical part in supporting Boeing's engineering initiatives and ensuring project success Collaborative Environment - Work with multidisciplinary teams across engineering, manufacturing, and procurement Professional Growth - Expand your expertise in aerospace manufacturing and government contract projects Your Role & Responsibilities Track and manage team progress to ensure timely delivery against project schedules Collaborate with multiple discipline groups, including engineering, manufacturing, and procurement Utilize Smartsheet tools to monitor and report project status Provide regular updates and status reports to Boeing management representatives Skills & Experience You Should Possess Minimum of 10 years of experience in program or project engineering support Strong background in project scheduling and team coordination Proficiency in Smartsheet or similar project management tools Bonus Points If You Have Aircraft manufacturing experience Exposure to new product development, particularly aerospace composites or thermoplastics Familiarity with government contract requirements Education & Certifications You Need Bachelor's degree in Engineering or related field preferred What We Offer At Expleo Group USA, we value expertise, innovation, and collaboration. By joining our client's team, you'll work on high-impact projects while enjoying a supportive work environment. Competitive Compensation - You choose the model that works best for you, both with company-sponsored benefits! $125,000-$145,600 annually or $60-$70 per hour, depending on your skills, experience, and location. Final compensation is determined based on skill alignment, years of experience, and fair, market-based rates by geography. Comprehensive Benefits for you and your dependents Paid Time Off Onsite Work Model - Work hands-on in Wichita, KS more than 3 days per week Career Development - Access to training, certifications, and leadership opportunities Supportive Team Culture - Work with a team that values continuous learning and growth Please note: This role is only open to candidates authorized to work in the U.S. Ready to design the future of aerospace? Apply today and take the next step in your career as a Design Engineer with Expleo USA! Will Smith: #LI-WS1 Sophia Hill: #LI-SH2

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Commercial Aircraft is looking for Static Stress & F&DT Structure Engineers to join our Engineering department based in Wichita, Kansas. You will be part of a team that supports the development of aircraft structures as a Static Stress or F&DT analyst. Duties include performing complex static or F&DT analysis for both metallic and non-metallic parts while working in close collaboration with design colleagues to provide quality solutions. Methods include the use of both classical hand calculations and computer techniques to develop high strength to weight ratio structures. Meet the team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your working environment: Located on the Wichita State University (WSU) innovation campus is Airbus' first dedicated engineering facility outside of Europe. Our team of 200+ support staff and engineers focus on aerostructure design including analysis of aircraft primary structures, such as wings and fuselages, for all major Airbus products across the globe. How we care for you: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: * Work on unusually complex technical problems and provide solutions which are highly innovative and ingenious. * Document analyses in support of trade studies or detail drawing sign-off for airframe structure. * Collaborate with other (internal/external) technical departments to solve complex technical problems. * Develop advanced technological ideas and guide their development into a final product. * Mentor less experienced structural analysts and provide leadership and guidance of a highly complex range of problems. * Lead aspects of major projects successfully. * Set broad objectives with timelines and establish the tasks required and how they should be completed. * Demonstrate a high level of listening and speaking capabilities with all levels of management, internal and external. * Determine and pursue courses of action necessary to obtain desired results. Your boarding pass: * Bachelor of Science (BS) Degree in Engineering (Aero, Civil, or Mechanical) with a strong curriculum emphasis on structural design and analysis, and/or mechanics of materials * Minimum 12 years total structure analysis experience in analysis of primary airframe structures. * Experience in composite aircraft structure (airframe) * In-depth knowledge of classical and numerical (Finite Element) stress analysis methods. * A strong computer background, including MS Office application experience (Outlook, Excel, Word, PowerPoint) and Google Suite application experience (Docs, Sheets, Slides, Gmail). * Authorized to Work in the US * Prefer experience with A350, A220 Pylon or other Airbus commercial aircraft. Physical Requirements: * Onsite or remote: Onsite 90% * Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. * Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. * Speaking: able to speak in conversations and meetings, deliver information and participate in communications. * Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. * Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Pushing / Pulling: able to push and pull small office furniture and some equipment and tools. * Sitting: able to sit for long periods of time in meetings, working on the computer. * Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. * Standing: able to stand for discussions in offices or on the production floor. * Travel: able to travel independently and at short notice. * Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. * Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Structure & Dynamic Systems Analysis * ----- * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

**Requisition ID:** 176012 **Job Level:** Mid Level **Home District/Group:** Eastern District **Department:** Project Engineering **Market:** Transportation **Employment Type:** Full Time As a Project Engineer for Kiewit, you will support construction activities by planning, organizing, and implementing management duties (i.e., project controls systems, engineering interface, subcontract, and materials management, purchasing, scheduling). This role will provide project administration and/or support to a Senior Project Engineer on larger projects and manage technical and administrative staff to facilitate instruction management services. **District Overview** Kiewit's Eastern District specializes in challenging heavy civil construction projects throughout the Northeast, including the metropolitan areas of New York, Chicago, Boston, and Washington DC. We are leaders in bridge, transit, foundation, tunnel, and water/wastewater construction while specializing in cast-in-place concrete, structural steel erection, earthwork, pile driving, and caissons. Kiewit's Eastern District also has a large amount of work in the energy/power sector in various northeast locations. With our experienced and dedicated employees, extensive resources and in-depth market knowledge, the Eastern District can handle projects of any size. **Location** Kiewit is a company that goes where the work is, which means a career with us can take you and your family to exciting parts of North America - and maybe even beyond. Eastern District's work predominately exists within the Great Lakes Area, Mid-Atlantic and the Northeast. Job assignment location will be determined closer to your start date. Must be able to travel and relocate as frequently as business needs require. These projects are happening in large cities and small towns, so you have a chance to experience it all! **Responsibilities** - Develop complete understanding of contract plans and specifications for portion of work assigned. - Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. - Inspect subordinates' work for compliance with the contract plans and specifications, point out deficiencies, and explain/take any corrective actions as needed. - Develop and maintain the project master schedule using appropriate techniques and scheduling software with input from other project management personnel. - Manage document control; receive and log in new issue drawings and other contract documents. - Review new issue drawings and contract documents for change of conditions; quantify impact of changes and review with supervisor; distribute new issues to field. - Prepare monthly cost projections using information generated from project management systems and prepare quarterly cash flow projections. - Improve project operations by recommending better methods, staffing, procedural, and other changes as needed. - Act as managing project engineer/coordinator on multiple projects, providing supervision and on-the-job training for lower-level engineers. - Read and understand plans and specifications. - Visualize two-dimensional drawings in three dimensions. - Manage and support project team including direct reports and others as needed. - Help drive the company environmental health and safety programs at the project level, driving a safety-oriented approach to work. **Qualifications** - 4 years of experience in construction and/or engineering field working on heavy civil infrastructure and/or transportation type projects. - Bachelor's degree in engineering, construction management, or related field (or equivalent experience and education in project and/or field engineering). - Proven abilities and skills within the areas of leadership, management, delegation, and mentoring of people. - Strong communication skills (verbal and written). - Ability to set standards of excellence in leadership, safety, quality, and productivity for his/her subordinates. - Knowledge and ability to direct operation of management systems, such as accounts payable/accounts receivable, materials control, estimating, job cost updates, and subcontracts. \#LI-SS1 \#LI-WJ1 Other Requirements: - Regular, reliable attendance - Work productively and meet deadlines timely - Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment - Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. - Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. - May work at various different locations and conditions may vary Base Compensation: 95,000/yr - $139,000/yr (Actual compensation is subject to variation due to such factors as education, experience, skillset, and/or location) We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit