Clarion Technologies jobs - 20 jobs

Maintenance Technician - Injection Molding - Clarion Technologies, Inc. is growing and adding to our team of skilled maintenance technicians. If you enjoy a fast-paced environment with a great group of co-workers, explore Clarion. Our presses range in size from 90T to 2500T. Our Maintenance Technicians are responsible for troubleshooting, repair and PM's on all machinery and auxiliary equipment. We have a very strong preventive maintenance program. We would love to hear from you if you have at least 3 years of maintenance experience in an injection molding facility. Work Remotely No Job Type: Full-time Schedule: 8 hour shift Overtime Experience: maintenance: 3 years (Preferred) Plastic Injection Molding: 3 years (Preferred) Work Location: In person

(Mission): This position is responsible for the operation of machinery, equipment, and tooling required in the manufacturing of piston rings. Essential Functions and Responsibilities: (Duties include but are not limited to) Uses quality standards to ensure set-ups are done correctly and operates the machinery at an acceptable rate, ensuring that the machinery runs within process control parameters while practicing safety compliance at all times. Follows SPC chart measurements requirements while operating the machinery in order to produce product that meets with strict design and quality standards. Follows work instructions to determine proper method of performing quality work Performs unskilled maintenance as required. Stacks, marks, packs, and transports finished work pieces. Records data on employee time/job card in the computer. Maintains work area in a neat and organized manner. Notify team leader or supervisor of any mechanical or material issues/shortages and recommends production efficiency and quality improvements to supervisor. Immediately report incidents and accidents in work area. Follows applicable safety and environmental rules and regulations Participate/Establish an environment and culture that promotes safety in the workplace. Attends and contributes to department and Company meetings. Participates in continuous improvement education/training programs to maintain current technology and methodology as specified by management. Performs other duties as assigned. Work Environment This job operates within a plant environment subject to indoor factory conditions; heated in winter and non-air conditioned in summer. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. May have to transfer product from one building to another. Requirements Education, Skills & Experience Required: We expect all team members to exhibit our guiding principles, all day, every day - Respect, Dedication, Integrity, Teamwork and Positivity. High School diploma or GED is required. Minimum of one-year factory or equivalent experience is preferred in metal forming, machining or operation of machines. Position involves standing, walking and lifting for periods of time throughout the day. Willingness to work various shifts and overtime as needed. Fluent in English with comprehensive speaking, writing, spelling skills. Must be able to perform basic math. Possess strong analytical and problem-solving skills. Physical Demands Must be capable of lifting up to 50 pounds routinely and be physically capable of full range of motion as required to perform all tasks and functions as listed above. While performing the duties of this job, the employee is regularly required to use corrected vision, talk or hear. The employee is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms - above, at and below the waist. The position rarely involves sitting. This position will include walking long distances, moving about in a work area with bending, twisting, turning and reaching throughout the day.

Job Title: Program Manager The Program Manager will oversee and execute customer development projects, managing all commercial and program-related tasks. This role involves implementing business strategies, maintaining strong business relationships, leading internal teams, managing timelines, and overseeing customer interactions and assigned projects. Main Tasks Provide ongoing support to customers for technical issues and ensure high-quality service, including order follow-ups, customer visits, cost/revenue analysis in collaboration with project controlling, and preparing and conducting customer presentations. Act as a liaison between customers and M+H departments for assigned programs. Prepare and lead price negotiations for assigned projects in partnership with the sales team. Support customer projects from a technical and commercial perspective, ensuring adherence to budget and deadlines throughout the project lifecycle. Plan and coordinate all project activities in line with the M+H development process (xSEP), ensuring compliance with quality specifications. Define project organization and lead a cross-functional project team. Conduct feasibility studies with the project team. Analyze project risks regarding profitability, timing, technical requirements, and environmental considerations. Plan project resources and budget, ensuring compliance with the project timeline and budget constraints. Define Quality Gates and detailed time planning for the project. Organize kick-off meetings, regular team meetings, and individual communication with stakeholders. Provide escalation support and necessary decision-making in the steering committee. Report on Quality Gates in the local steering committee according to the project plan. Present project updates to customers. Serve as the primary point of contact for customers regarding the assigned project. Regularly review project status, identify deviations from Quality Gates, and implement corrective actions. Continuously coordinate and follow up on open tasks with the project team. Your Profile Education: Bachelor's degree in Engineering, Business Administration, or a related field. Experience: Minimum of 2 years of relevant business experience in the automotive industry. Skills: Strong customer orientation and project coordination abilities. Self-starter with excellent organizational and communication skills. Ability to perform under pressure and manage conflicts effectively. Proficient in Microsoft Office, SAP, and other relevant project management tools. Preferred: Experience in the filtration industry is a plus. Working knowledge of MANN+HUMMEL products and customer business processes. We offer A collaborative and innovative work environment within a global market leader. Competitive compensation and a comprehensive benefits package. Opportunities for continuous learning, professional development, and career advancement. Direct impact on high-profile customer programs and cross-functional initiatives. A culture that values integrity, accountability, and excellence. #LI-Onsite

The Warranty Technician plays a key role in evaluating customer-returned products, performing detailed inspections, and determining root cause of failures. This position supports problem-solving activities, maintains warranty documentation, ensures compliance with MANN+HUMMEL quality systems, and collaborates with internal teams to uphold product integrity and customer expectations. Main Tasks Problem Solving & Part Analysis Perform visual and physical inspections on customer returns and internal parts. Conduct root cause investigations to determine failure mode and verify whether product and process requirements were met. Lead problem-solving activities with cross-functional teams. Analyze statistical and technical data to validate corrective actions and improvement projects. Test parts according to defined standards and document results. Quality System Compliance Apply solid working knowledge of the MANN+HUMMEL Management System (MMS) and customer-specific requirements. Lead the MMS Field Failure Analysis (FFA) process. Participate in Measurement System Analysis (MSA). Maintain the internal MHUS warranty log system. Enter field complaint data into SAP QM/WM (Z2) as needed. Support internal and external audit activities. Product Knowledge & Disposition Interpret drawings, FMEAs, control plans, validation test plans, and other documentation to understand all inspection and test requirements. Determine product disposition for warranty returns: scrap, hold, return to customer, or escalate for further review. Make product disposition decisions as needed (release, scrap, use-as-is, HOLD, etc.). Communicate product usage, intent, and requirements to other employees. Education & Experience High school diploma required; an associate or bachelor's degree is a plus. Minimum 2 years of experience in quality inspection or plastics manufacturing preferred. Skills & Qualifications Strong analytical and problem-solving skills. Working knowledge of Microsoft Office. Experience with SAP and Cim Database (CDB) preferred. Ability to work independently and manage daily tasks with minimal supervision. Clear and professional communication skills; able to provide guidance to others. We Offer A stable and growing work environment within a global industry leader. Opportunities for professional development and advancement. Collaborative, team-oriented culture with support from Quality and Engineering teams. Competitive compensation and comprehensive benefits package.

Role Summary Product Design Engineer Company: MANN+HUMMEL As a Product Design Engineer, you will conceptualize and create innovative designs that meet product specifications and cost targets. You'll collaborate across teams to ensure feasibility, optimize designs for performance and manufacturing, and actively contribute to continuous improvement initiatives such as Kaizen workshops. Main Tasks Responsible for the design and development of filtration systems. Conceptualizes complex new product designs, changes, and concepts to meet internal and external product specifications, cost, and timing. Works with cross-functional teams to evaluate product designs and specifications, determining feasibility while minimizing costs for development and manufacturing. Collaborates with operations to understand process capabilities and provides product design recommendations aligned with production strategies. Coordinates all computer-aided engineering (CAE) necessary to validate product designs analytically. Analyzes results to optimize design for performance, robust manufacturing, and cost efficiency. Completes CAD tasks as assigned by the Lead Product Engineer (LPE) and/or Manager - Design & Development. Occasionally coordinates and reviews engineering and CAD tasks with GBTS. Actively participates in and supports Kaizen/DLS workshops and annual objectives. Completes required tasks for each Gate per xSEP process. Your Profile Education: Bachelor's degree in Mechanical Engineering Experience: Familiarity with Design Failure Mode and Effects Analysis (DFMEA) Basic understanding of fluid dynamics Required Skills: Strong problem-solving abilities Excellent task organization and time management skills to meet project deadlines Flexibility for travel and attendance at Filtration training in Europe Preferred Qualifications: Minimum 1 year of relevant work experience (including internships) Proficiency in NX, CATIA, or Creo Background in the Heavy-Duty (HD) or Automotive industry Experience with casting and injection molding Previous involvement in filtration projects We offer Benefits: Competitive salary commensurate with experience Comprehensive benefits package, including health insurance, retirement plans, and paid time off Opportunities for career advancement and professional growth within a global organization A dynamic and inclusive work environment that fosters creativity, collaboration, and innovation #LI-Onsite

(Mission): The Senior Accountant position is responsible for month-end close, preparing the month end financial statements, cost accounting, and supporting the plant with timely, data driven insights. It will include working with the controller to report monthly financials to the CFO and the board of directors. Essential Functions and Responsibilities: (Duties include but are not limited to) 1. Financial Reporting & Month End Close a. Prepare financial statements to summarize and forecast the company's financial status 2. Cash Flow Management 3. Cost Accounting a. Support operations by tracking direct and indirect costs b. Preform Annual Cost roll c. Support cycle count program 4. Inventory Management a. Monitor Negative and obsolete inventory balances 5. Fixed Assets and Capital Project Management a. Track Capital expenditures and maintain fixed asset ledgers 6. Produces and manages balance sheets and analyzes future earnings and expenses. 7. Assists with preparations for audits. 8. Assist with yearly budgets. 9. Works to reconcile accounting inaccuracies or imbalances. 10. Ensure compliance with and prepare reports according to applicable government regulations. 11. Work with peers, superiors and subordinates to ensure the development and execution of the department/operating plan. 12. Ad hoc reports and analysis. 13. Other duties as assigned. Requirements Education, Skills & Experience Required: 1. We expect all team members to exhibit our guiding principles, all day, every day - Respect, Dedication, Integrity, Teamwork and Positivity. 2. Progressive experience in accounting, preferably in a manufacturing environment. 3. Ensuring accounting practices comply with US GAAP, internal policies, and audit requirements. 4. Excellent verbal and written communication skills. 5. Proficiency in MS Office including Word, Excel, Power Point and Outlook.

Job DescriptionDescription: We are seeking a skilled and detail-oriented Process Technician with expertise in plastic injection molding to join our manufacturing team. The ideal candidate will be responsible for setting up, adjusting, and optimizing molding processes while performing mold/tool changes and ensuring equipment efficiency, product quality, and adherence to safety standards. Key Responsibilities: Perform mold/tool changes efficiently and accurately according to production schedules and safety protocols. Set up and start up injection molding machines, auxiliary equipment, and molds to meet production requirements. Optimize molding processes to improve part quality, reduce cycle times, and minimize scrap and downtime. Troubleshoot mold, machine, and process-related issues; implement effective corrective actions. Monitor and document process parameters; maintain accurate production and setup records. Collaborate with maintenance, engineering, and quality teams to support reliability and performance. Ensure proper handling, installation, and removal of tools and molds using overhead cranes or hoists as needed. Train and support machine operators on proper process and troubleshooting procedures. Maintain cleanliness and organization in the molding area in accordance with 5S and safety guidelines. Participate in continuous improvement initiatives, including root cause analysis and process development. Requirements: High school diploma or GED required; technical certification or associate degree in manufacturing technology, plastics, or related field preferred. Minimum 2-3 years of hands-on experience in plastic injection molding and mold change operations. Strong understanding of thermoplastics, mold setup, tooling safety, and processing techniques. Familiarity with scientific molding principles (e.g., RJG, Decoupled Molding) is a plus. Ability to read and interpret blueprints, setup sheets, and technical documentation. Strong mechanical aptitude and troubleshooting ability. Willingness to work flexible shifts, including nights and weekends as needed. Physical Requirements: Ability to stand for extended periods and lift up to 50 lbs. Manual dexterity and visual acuity required for machine adjustments and part inspections. Ability to operate cranes, hoists, and other mold-handling equipment safely.

1. Analyze a variety of specifications from blueprints, sketches, models, or descriptions, and visualize product to be made. 2. Must have knowledge to lay out stock, as well as set up and operate machine tools and hand tools. 3. Fit and assemble components to make, maintain, and repair tools, jigs, fixtures, bushings, collars, gages, and mold patterns. 4. Compute dimensions, decide on machining to be done, plan layout and assembly operations. 5. Verify the dimensions, alignments, and clearances while using measuring instruments such as dial indicators, gage blocks, thickness gages, and micrometers. 6. Adapt to new methods, processes, material, and equipment. 7. Record data on employee time/job card. 8. Report work shortages to Manager/Supervisor. 9. Recommend production efficiency and quality improvements to supervisor. 10. Comply with safety regulations and ensure cleanliness in tool and die area to include all tools, benches, and machines. 11. Immediately report incidents and accidents in work area. 12. Participate in an environment and culture that promotes safety in the workplace. 13. Attends and contributes to department and Company meetings. 14. Develop constructive relationships with vendors, contractors, consultants and governmental agency representatives as necessary. 15. Other duties as assigned Requirements 1. We expect all team members to exhibit our guiding principles, all day, every day - Respect, Dedication, Integrity, Teamwork and Positivity. 2. High School diploma or equivalent required. 3. Ability to program CNC machines using G and M codes or through conversational programming. (SolidWorks, Mastercam, and Fanuc languages used on 3 axis) 4. Selection of proper tools to create geometry. 5. Proficiency in setting optimal speed and feeds for material type, as well as cutting tools selection. 6. Knowledge of internal combustion engines and related mechanical systems. 7. Possess strong analytical and problem solving skills. 8. A minimum of 2-3 years' experience in programming CNC, Mills, Lathes, EDM, Grinders and secondary machines or equivalent course work through a technical trade school, preferred. 9. Willingness to work various shifts and overtime as needed. 10. Fluent in English with comprehensive speaking, writing, spelling skills. 11. Position subject to indoor factory conditions; heated in winter and non-air conditioned in summer 12. Must be able to perform basic math. 13. Basic knowledge of MS Office including Word, Excel, and Outlook.

Job Title: Process Engineer Department: Technical Position Description: Manufacturing support position with responsibilities focused upon the development and optimization of new products and processes. Primary Responsibilities Essential Functions: -Perform all 1st shot samples at the manufacturing plant and buy off/approve the hand off of the tool to the production team for the Launch group. -Program robots, build EOAT and trouble shot problems. -Develop, optimize, and document new/improved processes in support of manufacturing. -Identify, review, and recommend new technologies in support of business objectives. -Develop and support continuous improvement plans. -Troubleshoot complex process, tool, and machine issues. Additional Responsibilities: -Provide technical support to manufacturing/process operations, as required. -Update and maintain process monitoring documents to meet production needs, as required. -Provide technical support to manufacturing/process operations as required. -Participate in Launch meetings, review tool drawings, part drawings, mold flows, and DFMs as required. -Initiate and participate, as needed, for internal problem solving/improvement activities. -Other duties as assigned by management. Other Requirements: -Bachelor's degree or a minimum of 2 years of related experience and/or training. -Ability to effectively communicate with all levels of associates. -Ability to apply basic math skills - addition, subtraction, multiplication, division. - Proficient use of personal computer and computer operation within a network environment. -Ability to comprehend and apply principles of advanced engineering, modern computer techniques, and state of the art plastic technology. - Ability to work in a fast-paced environment under extreme deadline pressure. -Ability to support overtime during the week or weekends. -Ability and willingness to travel to other manufacturing sites and support if needed. Position Key Interfaces Internal: -All Clarion associates at all locations -Clarion Corporate manufacturing support External: -Clarion's customers -Clarion's vendors Key Measure Accountability: -Safety -Quality -Judgement/Decision making -Teamwork/Interpersonal skills -Attention to detail and accuracy of work -Cost savings -Time management

Revere Plastics Systems is an industry-leading custom injection molding company, recognized for delivering flexible, economical and professional solutions to our clients. We are building a culture that fosters personal and professional development within a collaborative, team-centric, workplace. Successful team members at Revere are passionate about achieving their goals and believe in striving for improvement in all things, every day. We are looking for an individual with experience in plastic injection molding maintenance to work with the engineering and maintenance departments to repair, develop, evaluate and improve upon manufacturing methods to join our 2nd and/or 3rd shift maintenance team. The technicians will be tasked with troubleshooting and performing repairs to hydraulic and electric machines, robots, and secondary equipment as needed. Troubleshooting skills and the ability to work independently and with minimal direction is essential for this position. Including: Responsible for repair and maintenance of all plant equipment, buildings and grounds. Observe mechanical devices in operation and listen to their sounds to locate causes of trouble. Dismantle devices to gain access to and remove defective parts. Adjust functional parts of devices and control instruments. Ability to understand how robot programing works and able to make needed adjustments. Troubleshoot press and robot issues, in conjunction with Process Technicians as needed to assist. Maintain records in compliance with quality procedures and equipment operating logs and properly document activities. Complete preventive maintenance and update PM logbooks. Follow safety standards and procedures according to OSHA and ANSI regulations. Complete repairs on hydraulic systems, HVAC, conveyors, and pneumatic circuits. Troubleshoot electrical issues, expert in wiring/re-wiring. Develop and manufacture poke-yoke/alarm systems, where applicable. Troubleshoot and repair failed machinery and control systems. Troubleshoot and repair issues with automated equipment including but not limited to: Sensors, Servo controls, Power supply's, VFD, I/O cards, Relays, HMI, load cells, etc. Read and understand PLC ladder logic for troubleshooting and making minor program changes. Identify maintenance concerns, issues, and work to assist with the resolution of issues. Assist with new product launch. Requirements 3-5 years' experience in troubleshooting injection molding and secondary equipment required. Experience with robotics, programmable controls, including the ability to troubleshoot and modify programs through the appropriate tools highly preferred. Industrial electrical knowledge or experience is preferred. Experience working on plant machinery, electronics, hydraulics, pneumatics, and HVAC is a plus. Ability to read electrical and mechanical drawings is desired. Capability of EOAT Design and Fabrication plus. Proficiency in valve gate design and installation plus. Willing and able to be certified on forklift (sit down and standup) and scissor lift. Must be willing to stay current with technology through continuous education. Excellent communication skills. High School Diploma or GED required; degree a plus. PHYSICAL DEMANDS: Able to work independently with limited supervision. Able to lift, move, push and pull up to 40 pounds frequently. Bend, stoop, stand, sit and walk up to 8 hours, to perform all essential job functions with or without reasonable accommodation. Must be able to remain in a stationary position 50% to 100% of the time. Able to ascend/descend forklift and standing lift, trailers, steps, ladders etc. No aversion to heights

Job Title: Operator Department: Manufacturing Position Description: Responsible for working on the manufacturing floor involved in the production, assembly, inspection, and reporting of manufactured products. Primary Responsibilities Essential Functions: - Review Operator Work/Packaging Instructions. - Review Boundary samples. - Review First piece samples, and trim samples as required. - Review/understand Roadmap. - Ensure product container is clean, free of old labels, and verify correct labels are applied. - Operate manufacturing equipment in a safe and efficient manner. - Maintain Plant cleanliness and organization. - Perform trimming, de-gating, and assembly/decorating operations as defined. - Inspect and verify part quality. - Perform quality checks at required intervals and document. - Collect and record daily production. - At start/end of shift, communicate with prior/next shift any process or product issues. Additional Responsibilities: - Work requires timely reaction/escalation to safety or quality issues. - Grind and/or dispose of scrap, as directed. - Participate, as needed, in internal problem solving/improvement activities. - Read, interpret, and apply logic to carry out instructions provided in written, oral, or diagram form. - Communicate effectively with all levels of associates. - Other duties as assigned by supervision. Other Requirements: - All employees are responsible for complying with the safety policies and procedures. - Must complete training requirements for the position, as outlined in training matrix. - Lifting shoulder high up to 40 lbs. repetitively. - Ability to work in a fast-paced environment. - Working in a non-climate-controlled environment. - Work requires repetitive motion activities including but not limited to box cutting, standing, lifting, pushing/pulling, bending, and loading/unloading. - Perform basic math functions - addition, subtraction, multiplication, and division. - Able to support overtime during week or weekends. Position Key Interfaces Internal: - Production Supervisors/Team Leads/Relief Operators - Quality, Manufacturing and Process Engineers External: - Corporate Manufacturing support Key Measure Accountability: - Safety - Quality - Judgement/Decision Making - Teamwork/Interpersonal Skills - Attention to detail and accuracy of work - Cleanliness

Full-time Description (Mission): This position is responsible for the operation of machinery, equipment, and tooling required in the manufacturing of piston rings. Essential Functions and Responsibilities: (Duties include but are not limited to) Uses quality standards to ensure set-ups are done correctly and operates the machinery at an acceptable rate, ensuring that the machinery runs within process control parameters while practicing safety compliance at all times. Follows SPC chart measurements requirements while operating the machinery in order to produce product that meets with strict design and quality standards. Follows work instructions to determine proper method of performing quality work Performs unskilled maintenance as required. Stacks, marks, packs, and transports finished work pieces. Records data on employee time/job card in the computer. Maintains work area in a neat and organized manner. Notify team leader or supervisor of any mechanical or material issues/shortages and recommends production efficiency and quality improvements to supervisor. Immediately report incidents and accidents in work area. Follows applicable safety and environmental rules and regulations Participate/Establish an environment and culture that promotes safety in the workplace. Attends and contributes to department and Company meetings. Participates in continuous improvement education/training programs to maintain current technology and methodology as specified by management. Performs other duties as assigned. Work Environment This job operates within a plant environment subject to indoor factory conditions; heated in winter and non-air conditioned in summer. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. May have to transfer product from one building to another. Requirements Education, Skills & Experience Required: We expect all team members to exhibit our guiding principles, all day, every day - Respect, Dedication, Integrity, Teamwork and Positivity. High School diploma or GED is required. Minimum of one-year factory or equivalent experience is preferred in metal forming, machining or operation of machines. Position involves standing, walking and lifting for periods of time throughout the day. Willingness to work various shifts and overtime as needed. Fluent in English with comprehensive speaking, writing, spelling skills. Must be able to perform basic math. Possess strong analytical and problem-solving skills. Physical Demands Must be capable of lifting up to 50 pounds routinely and be physically capable of full range of motion as required to perform all tasks and functions as listed above. While performing the duties of this job, the employee is regularly required to use corrected vision, talk or hear. The employee is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms - above, at and below the waist. The position rarely involves sitting. This position will include walking long distances, moving about in a work area with bending, twisting, turning and reaching throughout the day.

Full-time Description We are seeking a skilled and detail-oriented Process Technician with expertise in plastic injection molding to join our manufacturing team. The ideal candidate will be responsible for setting up, adjusting, and optimizing molding processes while performing mold/tool changes and ensuring equipment efficiency, product quality, and adherence to safety standards. Key Responsibilities: Perform mold/tool changes efficiently and accurately according to production schedules and safety protocols. Set up and start up injection molding machines, auxiliary equipment, and molds to meet production requirements. Optimize molding processes to improve part quality, reduce cycle times, and minimize scrap and downtime. Troubleshoot mold, machine, and process-related issues; implement effective corrective actions. Monitor and document process parameters; maintain accurate production and setup records. Collaborate with maintenance, engineering, and quality teams to support reliability and performance. Ensure proper handling, installation, and removal of tools and molds using overhead cranes or hoists as needed. Train and support machine operators on proper process and troubleshooting procedures. Maintain cleanliness and organization in the molding area in accordance with 5S and safety guidelines. Participate in continuous improvement initiatives, including root cause analysis and process development. Requirements High school diploma or GED required; technical certification or associate degree in manufacturing technology, plastics, or related field preferred. Minimum 2-3 years of hands-on experience in plastic injection molding and mold change operations. Strong understanding of thermoplastics, mold setup, tooling safety, and processing techniques. Familiarity with scientific molding principles (e.g., RJG, Decoupled Molding) is a plus. Ability to read and interpret blueprints, setup sheets, and technical documentation. Strong mechanical aptitude and troubleshooting ability. Willingness to work flexible shifts, including nights and weekends as needed. Physical Requirements: Ability to stand for extended periods and lift up to 50 lbs. Manual dexterity and visual acuity required for machine adjustments and part inspections. Ability to operate cranes, hoists, and other mold-handling equipment safely.

Stone Plastics is currently seeking outstanding individuals to join our Maintenance Team! We are looking for a Maintenance Technician to support our facility. You will train with the other Maintenance team members to adequately prepare you for your role. Primary Function: Support functions on the manufacturing floor and resolution of technical problems. Assure equipment is consistent and available for production. Provide consistent equipment/facilities. What Success Looks Like: The Maintenance Technician is responsible for maintaining consistent and capable equipment. This needs to be done with frequency and with a technical way of thinking. They are also responsible for repairing equipment. This needs to be done with systematic problem solving to ensure that the root cause of the issue is addressed. The Maintenance Technician is the front line for equipment needs/issues and needs to be able to communicate those items. The Maintenance Technician demonstrates solving problems and implements a sense of urgency in issue resolution. Experience: Hydraulics: 3 years (Preferred) Electrical wiring: 3 years (Preferred) Plastics injection molding: 3 years (Preferred) Robotics: 3 years (Preferred) Desired Qualifications: Strong Mechanical background. Hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC. Demonstrated safety work practices and ethic. Ability to problem solve. Strong organizational skills. Detail oriented, meticulous. Excellent interpersonal communication skills. High School diploma or equivalent. Production maintenance experience, preferred. Extensive mechanical repair or building experience, preferred. Hi-Lo License. Journeyman License in a mechanical electrical trade, preferred. Physical Demands Heavy work at times and confined spaces. Supervisory Responsibilities None Work Environment 100% Production Floor

Job DescriptionDescription: Revere Plastics Systems is an industry-leading custom injection molding company, recognized for delivering flexible, economical and professional solutions to our clients. We are building a culture that fosters personal and professional development within a collaborative, team-centric, workplace. Successful team members at Revere are passionate about achieving their goals and believe in striving for improvement in all things, every day. We are looking for an individual with experience in plastic injection molding maintenance to work with the engineering and maintenance departments to repair, develop, evaluate and improve upon manufacturing methods to join our 2nd and/or 3rd shift maintenance team. The technicians will be tasked with troubleshooting and performing repairs to hydraulic and electric machines, robots, and secondary equipment as needed. Troubleshooting skills and the ability to work independently and with minimal direction is essential for this position. Including: Responsible for repair and maintenance of all plant equipment, buildings and grounds. Observe mechanical devices in operation and listen to their sounds to locate causes of trouble. Dismantle devices to gain access to and remove defective parts. Adjust functional parts of devices and control instruments. Ability to understand how robot programing works and able to make needed adjustments. Troubleshoot press and robot issues, in conjunction with Process Technicians as needed to assist. Maintain records in compliance with quality procedures and equipment operating logs and properly document activities. Complete preventive maintenance and update PM logbooks. Follow safety standards and procedures according to OSHA and ANSI regulations. Complete repairs on hydraulic systems, HVAC, conveyors, and pneumatic circuits. Troubleshoot electrical issues, expert in wiring/re-wiring. Develop and manufacture poke-yoke/alarm systems, where applicable. Troubleshoot and repair failed machinery and control systems. Troubleshoot and repair issues with automated equipment including but not limited to: Sensors, Servo controls, Power supply's, VFD, I/O cards, Relays, HMI, load cells, etc. Read and understand PLC ladder logic for troubleshooting and making minor program changes. Identify maintenance concerns, issues, and work to assist with the resolution of issues. Assist with new product launch. Requirements: 3-5 years' experience in troubleshooting injection molding and secondary equipment required. Experience with robotics, programmable controls, including the ability to troubleshoot and modify programs through the appropriate tools highly preferred. Industrial electrical knowledge or experience is preferred. Experience working on plant machinery, electronics, hydraulics, pneumatics, and HVAC is a plus. Ability to read electrical and mechanical drawings is desired. Capability of EOAT Design and Fabrication plus. Proficiency in valve gate design and installation plus. Willing and able to be certified on forklift (sit down and standup) and scissor lift. Must be willing to stay current with technology through continuous education. Excellent communication skills. High School Diploma or GED required; degree a plus. PHYSICAL DEMANDS: Able to work independently with limited supervision. Able to lift, move, push and pull up to 40 pounds frequently. Bend, stoop, stand, sit and walk up to 8 hours, to perform all essential job functions with or without reasonable accommodation. Must be able to remain in a stationary position 50% to 100% of the time. Able to ascend/descend forklift and standing lift, trailers, steps, ladders etc. No aversion to heights

You're Invited: Job Fair Come meet our team and learn more about the opportunities available! Time: 10am-3pm Production - Light Industrial Machine Operator Location: Revere Plastics Systems - Fraser, MI Industry: Plastic Injection Molding Job Type: Full-Time | Day and Night shifts available (rotating 12-hour schedule) Join Our Team! Are you looking for a position with a supportive team, a casual work environment, and paid on-the-job training? We're hiring motivated individuals with a positive attitude to join our production team! As one of the largest injection molding companies in the U.S., we work with plastic parts that support key industries like automotive, medical, and home appliances. No manufacturing experience? No problem-we'll train you! What We Offer: Multiple shift options: Day and Night shifts available (rotating 12-hour schedule) Competitive pay: Starting at $15.00/hour, plus night shift differential Overtime and bonus opportunities Earn Paid Time Off starting your first week Casual dress code Benefits available after 90 days Requirements Highschool diploma or General Educational Development (GED) equivalency preferred. Be able to work flexible hours and overtime, as needed. The physical demands for this position may include being able to bend and stand for long periods,12-hour intervals, frequently working near machinery, and noise levels are moderate. Acceptable completion of a background check.

Maintenance Technician - Injection Molding - Clarion Technologies, Inc. is growing and adding to our team of skilled maintenance technicians. If you enjoy a fast-paced environment with a great group of co-workers, explore Clarion. Our presses range in size from 90T to 2500T. Our Maintenance Technicians are responsible for troubleshooting, repair and PM's on all machinery and auxiliary equipment. We have a very strong preventive maintenance program. We would love to hear from you if you have at least 3 years of maintenance experience in an injection molding facility. Work Remotely No Job Type: Full-time Schedule: 8 hour shift Overtime Experience: maintenance: 3 years (Preferred) Plastic Injection Molding: 3 years (Preferred) Work Location: In person

Job DescriptionDescription:You're Invited: Job Fair Come meet our team and learn more about the opportunities available! Time: 10am-3pm Production - Light Industrial Machine Operator Location: Revere Plastics Systems - Fraser, MI Industry: Plastic Injection Molding Job Type: Full-Time | Day and Night shifts available (rotating 12-hour schedule) Join Our Team! Are you looking for a position with a supportive team, a casual work environment, and paid on-the-job training? We're hiring motivated individuals with a positive attitude to join our production team! As one of the largest injection molding companies in the U.S., we work with plastic parts that support key industries like automotive, medical, and home appliances. No manufacturing experience? No problem-we'll train you! What We Offer: Multiple shift options: Day and Night shifts available (rotating 12-hour schedule) Competitive pay: Starting at $15.00/hour, plus night shift differential Overtime and bonus opportunities Earn Paid Time Off starting your first week Casual dress code Benefits available after 90 days Requirements: Highschool diploma or General Educational Development (GED) equivalency preferred. Be able to work flexible hours and overtime, as needed. The physical demands for this position may include being able to bend and stand for long periods,12-hour intervals, frequently working near machinery, and noise levels are moderate. Acceptable completion of a background check.

Maintenance Technician - Injection Molding - Clarion Technologies, Inc. is growing and adding to our team of skilled maintenance technicians. If you enjoy a fast-paced environment with a great group of co-workers, explore Clarion. Our presses range in size from 90T to 2500T. Our Maintenance Technicians are responsible for troubleshooting, repair and PM's on all machinery and auxiliary equipment. We have a very strong preventive maintenance program. We would love to hear from you if you have at least 3 years of maintenance experience in an injection molding facility. Work Remotely No Job Type: Full-time Schedule: 8 hour shift Overtime Experience: maintenance: 3 years (Preferred) Plastic Injection Molding: 3 years (Preferred) Work Location: In person