Fabricator jobs at CMC Motocross

Our client is seeking a Welding Supervisor for an excellent on-site position located in the Cordele, GA area. Responsibilities include: Responsible for daily welding and cutting operations, leading these teams and aligning with production goals and safely standards. Partner with plant manager and operations leaders on projects and timelines. Input and maintain proper record keeping for materials, equipment, work performed, and inspections in compliance with Quality Standards. Ensure quality, compliance, and progress via customer specifications and timelines. Perform regular checks on all equipment to ensure operation and safety, adhere to preventative maintenance schedules Lead, train, and mentor team to develop skills, techniques, and productivity. Schedule workflows, address issues, monitor results, ensure safety, and provide reporting to operations leaders. Qualifications and Experience: Minimum 8 years of welding and cutting experience, to include TIG/MIG and cutting equipment such as plasma cutters and saws. 2+ years of management, lead, or supervisory experience in a manufacturing, production, or welding environment. Highschool diploma required, trade school or certifications preferred. Experience working with enterprise systems, data input, and reporting preferred. Understanding of fabrication process and blueprints/schematics. Forklift and Safety certifications a plus. Physical Demands: Role will require walking and standing for extended periods, sitting at a computer desk, lifting at least 20lbs, hand-eye coordination, climbing or kneeling. Environment is industrial, has areas that may not be climate controlled, and require noise protection due to loud equipment.

Responsibilities: To include but not limited to the following * Use proper measuring equipment including; calipers, tape measures, pi tapes, durometers and/or snap gauges to measure all critical cross-sectional, physical, and length specifications on product before processing. * Use mechanical counters to count and package silicone extrusion products. * Fill out all necessary forms associated with product checks and shipping acknowledgements. * Package materials in a neat fashion per customer or Bellofram Silicones specifications. * Fabricate BELLOFOAM sponge sheets using the proper machinery. * Applying PSA to sheet materials. * Detect and report improper operations, faulty equipment, defective materials and unusual conditions to the supervisor. * Moves materials as necessary in the performance of the job or as directed by the supervisor. * Responsible for making sure that all equipment is calibrated and approved for use. * Responsible for making sure that all spray bottles are labeled properly. * Completes all ISO 9001:2015 AS9100D quality training and follows related procedures. * Performs any and all other related duties as required or directed. Job Specifications: * High School graduate or Equivalent. * Must be able to stand and work in various weather conditions. * Must be able to work in a fast pace work environment. Thank You Thank you for contacting us.

**Description:** Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts\. Sets\-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers\. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup\. Uses a variety of hand tools and precision measuring instruments\. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds\. May monitor and verify quality with statistical process or other control procedures\. Performs other duties as assigned **Basic Qualifications:** - Experience with CNC mills, routers, brake and/or roll press\. - Experience with drilling, routing, and sawing\. - Experience with reading and fabricating blueprint specifications\. **Desired Skills:** : Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts\. Sets\-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers\. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup\. Uses a variety of hand tools and precision measuring instruments\. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds\. May monitor and verify quality with statistical process or other control procedures\. Performs other duties as assigned Basic qualifications \(BQs\) are the minimum requirements for a candidate to be considered for a position, 3 to 5 BQs are most effective\. For additional Hiring Manager Training Resources, Learn more about basic qualifications here\. Basic Qualifications : - Experience with CNC mills, routers, brake and/or roll press\. - Experience with drilling, routing, and sawing\. - Experience with reading and fabricating blueprint specifications\. Desired skills are additional skills that are nice to have and help narrow down a qualified candidate pool\. Learn more about desired skills here\. Desired skills : Provide detail that is relevant to job seekers and will provide an overview of the most important aspects of the job\. This section is visible to Job seekers\. Learn more about s here\. Job Description : Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts\. Sets\-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers\. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup\. Uses a variety of hand tools and precision measuring instruments\. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds\. May monitor and verify quality with statistical process or other control procedures\. Performs other duties as assigned Basic qualifications \(BQs\) are the minimum requirements for a candidate to be considered for a position, 3 to 5 BQs are most effective\. For additional Hiring Manager Training Resources, Learn more about basic qualifications here\. Basic Qualifications : - Experience with CNC mills, routers, brake and/or roll press\. - Experience with drilling, routing, and sawing\. - Experience with reading and fabricating blueprint specifications\. Desired skills are additional skills that are nice to have and help narrow down a qualified candidate pool\. Learn more about desired skills here\. Desired skills : - 3\+ years in metal fabrication\. - Demonstrated competency in use of computers and other system to access, maintain, and manipulate data\. - Ability to work well in a team environment as well as be a self\-starter\. - Attention to detail\. - Focus on cost, quality, schedule, and safety\. **Clearance Level:** None **Other Important Information You Should Know** **Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match\. Should this match be identified you may be contacted for this and future openings\. **Ability to Work Remotely:** Onsite Full\-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility\. **Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees\. Schedules range from standard 40 hours over a five day work week while others may be condensed\. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits\. **Lockheed Martin is an equal opportunity employer\. Qualified candidates will be considered without regard to legally protected characteristics\.** **The application window will close in 90 days; applicants are encouraged to apply within 5 \- 30 days of the requisition posting date in order to receive optimal consideration\.** At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility\. If this sounds like a culture you connect with, you're invited to apply for this role\. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications\. **Experience Level:** Hourly/Non\-Exempt **Business Unit:** AERONAUTICS COMPANY **Relocation Available:** No **Career Area:** Manufacturing **Type:** Full\-Time **Shift:** First

Description:Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts. Sets-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup. Uses a variety of hand tools and precision measuring instruments. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds. May monitor and verify quality with statistical process or other control procedures. Performs other duties as assigned Basic Qualifications: * Experience with CNC mills, routers, brake and/or roll press. * Experience with drilling, routing, and sawing. * Experience with reading and fabricating blueprint specifications. Desired Skills: : Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts. Sets-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup. Uses a variety of hand tools and precision measuring instruments. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds. May monitor and verify quality with statistical process or other control procedures. Performs other duties as assigned Basic qualifications (BQs) are the minimum requirements for a candidate to be considered for a position, 3 to 5 BQs are most effective. For additional Hiring Manager Training Resources, Learn more about basic qualifications here. Basic Qualifications : * Experience with CNC mills, routers, brake and/or roll press. * Experience with drilling, routing, and sawing. * Experience with reading and fabricating blueprint specifications. Desired skills are additional skills that are nice to have and help narrow down a qualified candidate pool. Learn more about desired skills here. Desired skills : Provide detail that is relevant to job seekers and will provide an overview of the most important aspects of the job. This section is visible to Job seekers. Learn more about s here. Job Description : Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts. Sets-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup. Uses a variety of hand tools and precision measuring instruments. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds. May monitor and verify quality with statistical process or other control procedures. Performs other duties as assigned Basic qualifications (BQs) are the minimum requirements for a candidate to be considered for a position, 3 to 5 BQs are most effective. For additional Hiring Manager Training Resources, Learn more about basic qualifications here. Basic Qualifications : * Experience with CNC mills, routers, brake and/or roll press. * Experience with drilling, routing, and sawing. * Experience with reading and fabricating blueprint specifications. Desired skills are additional skills that are nice to have and help narrow down a qualified candidate pool. Learn more about desired skills here. Desired skills : * 3+ years in metal fabrication. * Demonstrated competency in use of computers and other system to access, maintain, and manipulate data. * Ability to work well in a team environment as well as be a self-starter. * Attention to detail. * Focus on cost, quality, schedule, and safety. Clearance Level: None Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: AERONAUTICS COMPANY Relocation Available: No Career Area: Manufacturing Type: Full-Time Shift: First

Restano Heating, Cooling, and Plumbing Why Choose Restano? At Restano Heating, Cooling, and Plumbing, we're built by techs, for techs. We know your skills are valuable. We have over 30 years of steady growth and a reliable customer base that keeps you busy year-round. If you're an experienced professional ready for a high-earning, drama-free environment, this is your next step. We're looking for an experienced HVAC Metal Fabricator who takes pride in their precision, technical skills, and commitment to safety and quality standards. Location: Plum, Pennsylvania Schedule: Open to Full-time or Part-time Pay: $30-35/hr. Take-Home Perks: Tools Provided Medical, Dental, Vision Benefits 401k with 4% Match PTO & Holidays What You'll Be Doing: Fabrication & Assembly Measure, cut, bend, and shape sheet metal to specifications using hand tools, power tools, and fabrication machinery. Operate equipment such as press brakes, shears, plasma cutters, and CNC machines. Assemble and join metal parts using welding, riveting, or other approved methods. Blueprint Interpretation Read and interpret HVAC system layouts, technical drawings, and blueprints to ensure accurate fabrication. Quality & Safety Inspect finished components for accuracy and quality. Maintain compliance with OSHA and company safety standards. Collaboration Work closely with installers and Install Manager to ensure timely delivery of fabricated components. Maintenance Keep tools, machines, and work areas clean and in good working conditions. What You'll Bring: 1+ years of experience in HVAC sheet metal fabrication (shop or field). Technical training or HVAC/sheet metal apprenticeship preferred. Proficiency with fabrication tools and machinery (shears, brakes, plasma cutters, welders). Ability to read and interpret blueprints and technical drawings. Strong attention to detail and measurement accuracy. If you're ready to join a company that values your experience and gives you the room to thrive, apply now to join the Restano team. We want to talk to skilled professionals who are serious about their careers. Posted Min Pay Rate USD $30.00/Hr. Posted Max Pay Rate USD $35.00/Hr.

There's never been a better time to join Stratus! As the market leader in brand implementation and maintenance, we transform how national brands connect with their customers. From exterior signage & interior branding to site refresh & remodel, from energy & lighting to repair & maintenance solutions, we deliver ideal solutions to meet all our client's branding needs. From our locations across the country, to our corporate headquarters in Mentor, Ohio, every employee is a stakeholder in Stratus' success. This environment offers endless career opportunities for individuals with a commitment to customer service, focus on execution and bias for action. Job Summary: The Fabricator III is responsible for manufacturing and assembling various signs, frames, structures, cabinets, and other items designated to the metal shop for fabrication. This role involves using specialized tools, equipment, and techniques to ensure high-quality results while adhering to safety and production standards. Responsibilities Ability to read and use a tape measure accurately. Understands all functionalities and uses handhelds for these functions. Able to read a manufacturing order and form materials into required shapes and dimensions for sign production. Ability to work effectively both independently and in a team environment. Adequate mathematical skills for fabrication tasks. Demonstrates willingness to adhere to plant wide safety rules. High attention to detail to ensure precision and quality in all work. Strong team philosophy, including demonstrating ability and desire to help develop team members. Complete necessary documentation, including completion slips, material listings, timecards, and requisition forms. Maintain flexibility in work hours, including availability for overtime as needed by management. Attend meetings and training sessions as required to stay updated on company policies and best practices. Perform necessary housekeeping tasks, including cleaning up production debris and properly storing materials and equipment. Ensure the care, maintenance, and security of all company resources, tools, and equipment. Maintain, perform, or notify management of routine maintenance on work machines and tools to ensure optimal performance. Provides effective leadership to department team members. Can meet or exceed estimates and reasonable expectations for output from Leads and Management. Effectively Fabricate the Following Sign Types: Drill and tap plaques. Glued ACM V grooved returns to angles. Post and Panel Signs. Small-Medium sized Dimensional Pan signs with internal angle Structure (no larger than sheet of aluminum). Stud mounted panels. Extruded Ground signs with Centerpoles. Extruded Wall signs. Large Dimensional Pan signs with internal angle structure and seams. Radiused signs kerf cutting of extrusion or angle. Stick built ground signs with steel centerpole. Stick built Wall signs- Alum or steel. Qualifications Understands how to set controls on Mig Spool Gun Welder. Working knowledge of how to use Angle Notcher. Working knowledge of how to use Chop Saws. Working knowledge of how to use Extrusion Saw. Working knowledge of how to use Iron Worker. Working knowledge of how to use Plasma Cutter. Working knowledge of how to use drill and tap. Working knowledge on how to use hand tools typically used in fabrication (grinders, cordless drills, jig saws). Working knowledge on how to use Stud Gun. Basic mechanical and construction knowledge, including an understanding of metals, wood, plastic, blueprints, and fasteners. Create logical cut sheets from engineering drawings. Floor engineer signs with limited information on drawings. Interpret Engineering type drawings and understands welding symbols. Weld Plates onto steel structure for pylon head center poles. Working knowledge of how to use Folding Table. Working knowledge of how to use Press Brake. Working knowledge of how to use Shear. Education, experience, certifications Must be at least 18 years old. High school or GED equivalent. 1-4 years in production environment making similar type structures and/or 1-2 years fabricating within the industry. Physical and mental demands Ability to stand for extended periods while operating machines and tools. Ability to lift and handle heavy materials and equipment as required. In the course of the job activity, it may be necessary at times to push/pull, climb, stoop, kneel, stand, or crawl when it is necessary to load or unload pipe, signs, or other materials, install/repair a new or an existing sign or structure. Comfortable working in a manufacturing environment with moderate to loud noise levels. Why Work With Us Supportive & Friendly Culture Manage national accounts for Fortune 500 companies Medical, Dental, Vision coverage options Flexible Spending & Health Savings Accounts Company paid Life Insurance 401k with Employer Contribution Company paid Short/Long Term Disability Generous Paid Time Off program + Holidays Career Growth Opportunities and Career Mapping Additional perks including Pet Insurance, Employee Assistance Program, Educational Assistance Program, Identity Theft Protection, Critical Illness Plans, Commuter Benefits and various employee discount offerings from our Vendors eeo/mfdv

There's never been a better time to join Stratus! As the market leader in brand implementation and maintenance, we transform how national brands connect with their customers. From exterior signage & interior branding to site refresh & remodel, from energy & lighting to repair & maintenance solutions, we deliver ideal solutions to meet all our client's branding needs. From our locations across the country, to our corporate headquarters in Mentor, Ohio, every employee is a stakeholder in Stratus' success. This environment offers endless career opportunities for individuals with a commitment to customer service, focus on execution and bias for action. Job Sumary: The Fabrication Lead oversees daily operations in the fabrication department, ensuring the production of high-quality signs, frames, structures, and other custom components. This role combines technical expertise with leadership responsibilities, focusing on efficient workflows, team mentoring, and maintaining safety and quality standards. The Fabrication Lead is also responsible for troubleshooting issues, coordinating with other departments, and driving continuous improvement initiatives. Responsibilities Oversee and guide the fabrication team, ensuring projects are completed on time and meet quality standards. Fabricate and assemble signs, frames, and structures using equipment such as CLN Notcher, CLN Bender, and Letter Lock Punch. Set up, operate, and troubleshoot fabrication machinery to ensure smooth operations. Review work orders, blueprints, and project specifications to plan and prioritize tasks. Train and mentor team members to enhance their skills and ensure adherence to company standards. Inspect completed work to ensure it meets specifications and address any quality issues promptly. Monitor inventory levels of materials and tools, coordinating with procurement as necessary. Collaborate with the Production Supervisor to address personnel issues, optimize workflows, and resolve production bottlenecks. Document production activities, including material usage, job progress, and equipment maintenance. Maintain a clean and organized work environment to promote safety and efficiency. Perform routine maintenance on fabrication equipment and tools to ensure reliability and longevity. Qualifications Must be at least 18 years old. High school diploma or equivalent preferred; additional certifications in fabrication or related fields are a plus. 3+ years of fabrication experience, with expertise in operating and maintaining fabrication equipment. Experience in the custom sign manufacturing industry preferred. Previous leadership or team coordination experience is highly desirable. Advanced mechanical skills, including proficiency with power tools, punch presses, press shears, and other fabrication equipment. Strong organizational and time-management skills to oversee multiple projects simultaneously. Ability to read and interpret blueprints, engineering drawings, and work orders. Excellent communication skills to provide clear instructions and feedback to team members. Problem-solving abilities to address production challenges and implement process improvements. High attention to detail and a commitment to maintaining quality standards. Ability to stand, bend, and move for extended periods. Regularly lift and handle materials weighing up to 50-80+ lbs, with the use of lifting equipment as necessary. Comfortable working in a manufacturing environment with moderate to loud noise levels. Familiarity with lean manufacturing principles or continuous improvement practices is a plus. Proficiency in using computer systems for documentation and tracking production activities. Why Work With Us Supportive & Friendly Culture Manage national accounts for Fortune 500 companies Medical, Dental, Vision coverage options Flexible Spending & Health Savings Accounts Company paid Life Insurance 401k with Employer Contribution Company paid Short/Long Term Disability Generous Paid Time Off program + Holidays Career Growth Opportunities and Career Mapping Additional perks including Pet Insurance, Employee Assistance Program, Educational Assistance Program, Identity Theft Protection, Critical Illness Plans, Commuter Benefits and various employee discount offerings from our Vendors eeo/mfdv

Under the direction of the Panel Shop Manager, the Panel Fabricator uses schematics to wire panels, control boxes, J-Boxes, PLC's, HMI's and various other electrical components. The Panel Fabricator will fabricate cut-outs in enclosures for various electrical hardware components. The use of different electrical and pneumatic hand tools is necessary to complete day-to-day tasks as is basic mechanical ability with other hand tools. Working knowledge of electrical schematics, electrical components, wire gauges, electrical standards and wiring troubleshooting skills. Reports To: Panel Shop Manager JOB QUALIFICATIONS Roles and responsibilities for this job may include but are not limited to: Reads and interprets wiring diagrams, point to point wiring schedules, and schematics. Able to spot inconsistencies in drawings and discrepancies in paperwork and to ask or answer questions during assembly process. Able to commit to a deadline or relay to Panel Shop Manager when deadlines may slip. Work closely with electrical engineering team to resolve any issues. Performs routine tasks in preparation for assembly, such as cutting wire to specified size, stripping, and fastening terminal connections. Performs wiring of electrical components and labeling of all devices and wires. Able to determine if components need repair or are unrepairable. Repair when required. Uses common hand tools to prepare and assemble components, din rail and wire duct to complete electrical panels to print. Chooses appropriate wire colors and gauges required to complete wiring to all applicable codes, specifications and regulations. Exercise safe work habits and maintain a clean and safe working area Field wiring of control cabinets into machinery if needed. Assist Engineers and Electrical Control Technicians with machine startup and debug. Arranges for packing and shipment of panels. Required Job Qualifications: High School Graduate Preferred Job Qualifications: Ability to read electrical prints/schematics Ability to use multi-meter to read voltage, current and resistance Knowledge of basic electrical theory Basic mechanical aptitude. Knowledge of electrical wiring and component connections in accordance with UL and UL508A Proficient in industry electrical code, NEC, ANSI, NFPA, and OSHA.

The Fabrication Lead directs the fabrication and assembly of pipe products. KEY JOB RESPONSIBILITIES: Fabricate pipes to required customizations Manage all Work Orders associated with fabrication Supervises work team in the planning and execution of a wide variety of fabrication. Plans resource requirements based on Work Orders and production plan. Fosters a spirit of teamwork within the department. Tracks, assigns, and monitors work orders. Ensure timeliness, safety and quality of material movement. Responsible for safe work practices, maintaining a safe work environment and ensuring work crews follow safe practices and HSE programs, including Lock-out Tag-out. In conjunction with the Production Supervisor and EHS Manager, trains employees on changes in safety regulations, work policies, and standards. Develops skills and abilities of team members. Ensures all department employees complete required training. Any other duties as assigned by TAS. JOB SKILLS: Knowledge of team leading practices and techniques. Ability to effectively coordinate and supervise multiple work orders. Able to make decisions. Commitment to the concept of continual improvement and effective quality management systems. The employee exhibits a professional manner in dealing with others and works to maintain constructive working relationships. JOB SKILLS Ability to read blueprints and follow product specification instructions Understanding the production and Work Order process Managing people EDUCATION & TRAINING High school diploma MINIMUM REQUIREMENTS: Two years of pipe or structural fabrication experience PHYSICAL REQUIREMENTS/WORK ENVIRONMENT: Work performed in a shop environment; Exposed to any number of elements but with none present to the extent of being disagreeable; Requires normal vision and absence of color blindness Physical effort equal to frequent moving of up to 50lbs materials; Regularly required to sit or stand, bend and reach; The use of Safety Glasses is required; The use of earplugs is recommended; Ability to stand up to 10 hours a day (with a lunch in between) and up to 6 days a week; Ability to work in a non-air-conditioned environment. Steel-toe boots required in Manufacturing Facility COMPANY OVERVIEW: Join a team driven to excel in all that we do! When you join TAS, you join a Houston-headquartered company that is part of a large Houston-headquartered publicly traded company, Comfort Systems USA, with a solid reputation built on outstanding value, integrity, and customer focus. We offer our customers and employees the best of both worlds: a small company feel with the resources, talent, process, and international reach of a large company. TAS delivers innovative packaged modular systems that are engineered and manufactured in one of our Houston, TX facilities and utilized in data centers, power, and commercial/industrial utility system applications. TAS has successfully delivered and commissioned over 520 packages to over 33 countries. The company is headquartered in Houston, TX and has five ISO 9001 certified manufacturing facilities in Houston, encompassing 1.2m sq. feet with proximity to major shipping ports and interstate highways. TAS manages all logistics and transportation facilitating accelerated construction at customer's facilities. TAS' fastest growing business is the data center market. By applying deep expertise in cooling, thermodynamics, and power, TAS has developed an entire product line that revolutionizes data center delivery. With our tremendous market potential, advanced technological systems, entrepreneurial culture as well as a talented and productive workforce, we continue to set and exceed aggressive market penetration and financial goals. More information is available on the company website at: ************ IMPORTANT NOTICE: TAS has a tobacco-free workplace policy, under which individuals are not allowed to smoke or use tobacco or nicotine products on the TAS premises, while conducting TAS business off premises or take "smoking" breaks during working hours. “smoking” and “tobacco or nicotine products” includes, but is not limited to, product such as cigarettes, e-cigarettes, cigars, pipes, vaping, all forms of smokeless tobacco (chewing tobacco, snuff, dip) and clove cigarettes The above declarations are not intended to be an all-inclusive list of the duties and responsibilities of the job described, nor are they intended to be such a listing of the skills and abilities required to do the job. Rather, they are intended only to describe the general nature of the job. Applications and resumes will be kept on file for a limited time and the Company is under no duty or obligation to contact applicants if they are not selected for the job applied for or if other jobs become available in the future. Applicants that desire to apply for a job that becomes available at the Company in the future, should submit a new employment application or resume. TAS Energy Inc. guarantees equal employment opportunities to all qualified applicants. All qualified applicants will receive consideration for employment, without regard to age, race, color, religion, sex, sexual orientation, gender identity, or national origin.

Operates manufacturing equipment within a production facility. Fabricates sheet metal components to support the ATM and Retail manufacturing operation which assembles these components into the final product. Ensures parts are fabricated to meet customer specifications. Required Qualifications Education or equivalent work experience required. Minimum of 2-4 years of relevant experience or equivalent combination of education and experience in Assembly and Fabricator. Good written and verbal communication skills. #LI-JS3 Incorporates experience and knowledge to perform tasks and ensure fabrication specifications are met. Experience with CNC Brake Presses and forming parts to drawing tolerances. Participates in process improvement activities or projects. Develops solid knowledge of wider production assemblies and machinery as experience grows. Proficient in reading blueprints and interpreting dimensions and GD&T Computer experienced and able use programs to read and enter data May coach less experienced team members. Adheres to safety guidelines.

Under the direction of the Panel Shop Manager, the Panel Fabricator uses schematics to wire panels, control boxes, J-Boxes, PLC's, HMI's and various other electrical components. The Panel Fabricator will fabricate cut-outs in enclosures for various electrical hardware components. The use of different electrical and pneumatic hand tools is necessary to complete day-to-day tasks as is basic mechanical ability with other hand tools. Working knowledge of electrical schematics, electrical components, wire gauges, electrical standards and wiring troubleshooting skills. Reports To: Panel Shop Manager JOB QUALIFICATIONS Roles and responsibilities for this job may include but are not limited to: Reads and interprets wiring diagrams, point to point wiring schedules, and schematics. Able to spot inconsistencies in drawings and discrepancies in paperwork and to ask or answer questions during assembly process. Able to commit to a deadline or relay to Panel Shop Manager when deadlines may slip. Work closely with electrical engineering team to resolve any issues. Performs routine tasks in preparation for assembly, such as cutting wire to specified size, stripping, and fastening terminal connections. Performs wiring of electrical components and labeling of all devices and wires. Able to determine if components need repair or are unrepairable. Repair when required. Uses common hand tools to prepare and assemble components, din rail and wire duct to complete electrical panels to print. Chooses appropriate wire colors and gauges required to complete wiring to all applicable codes, specifications and regulations. Exercise safe work habits and maintain a clean and safe working area Field wiring of control cabinets into machinery if needed. Assist Engineers and Electrical Control Technicians with machine startup and debug. Arranges for packing and shipment of panels. Required Job Qualifications: High School Graduate Preferred Job Qualifications: Ability to read electrical prints/schematics Ability to use multi-meter to read voltage, current and resistance Knowledge of basic electrical theory Basic mechanical aptitude. Knowledge of electrical wiring and component connections in accordance with UL and UL508A Proficient in industry electrical code, NEC, ANSI, NFPA, and OSHA.

INDUSTRY: Custom Fabrication EMPLOYMENT TYPE: Full Time, Requires Flexibility CONTEXT: Our client is seeking a skilled and adaptable Custom Fabricator to join their team. This role focuses on professional fabrication work supporting their line of 1970-series Ford vehicles, with an emphasis on framework and suspension components. The ideal candidate brings hands-on fabrication experience and specific exposure to Ford 70 models. RESPONSIBILITIES: Fabricate and assemble framework and suspension components for 1970-series Ford vehicles. Perform precision fabrication work to meet quality and performance standards. Read and interpret fabrication drawings, measurements, and specifications. Work collaboratively with the shop team to meet build timelines. Maintain a clean and organized work environment. QUALIFICATIONS: Professional fabrication experience required. Experience or exposure working on 1970-series Ford vehicles strongly preferred. Welding experience is a plus, but not required. Painting experience is not required. Strong attention to detail and craftsmanship. Ability to commute reliably to Comfort, TX. Adaptable and willing to assist with other vehicle builds as needed.

2026 - 2x Welder 2nd shift MUST PASS 6G TESTING MUST HAVE HEAVY WALL PIPE EXPERIENCE MIG EXPERIENCE RESPONSIBILITIES: •Performs layout and fits up work using fixtures or positioners •Welds various metals using Pulsed MIG, Short-arc MIG or Submerged arc processes •Uses MIG welder to assemble fabricated metal products in an efficient manner to maximize production •Operates the equipment in a safe manner and reports hazards associated with the equipment to the supervisor •Produces strong penetrated welds that are smooth, non-porous and consistent •Follows required procedures and uses appropriate jigs and fixtures to assist in the assembly process •Performs a variety of brazing functions encompassing all materials •Performs hand grinding and forming work as needed •Cleans and maintains an orderly work area •Communicates effectively with others •Assists other individuals in area when needed EDUCATIONAL REQUIREMENTS: High School Diploma or GED EXPERIENCE/QUALIFICATIONS: •Two-year experience in manufacturing welding using Pulsed MIG, Short-arc MIG or Submerged arc processes •Ability to pass an onsite 6G certification test Preferred; •ASME certification •Knowledge of the welding process and equipment •Ability to weld vertical, flat and overhead welds with a good penetration and a quality appearance •Ability to operate a plasma cutter and acetylene torches •Math skills including fractions and angles •Ability to read tape measures and angle finders •Ability to read blueprint drawings and cut lists •Good communication skills relative to supervisor and other related departments •Trained in overhead crane operation •Ability to lift 50 pounds •Physical ability to work and weld in awkward positions such as kneeling, lying down and overhead •Ability to climb and work from a ladder •Ability to operate various shop tools including power and manually operated wrenches •Able to work weekends and over-time Required qualifications: •High School Diploma or GED •Two-year experience in manufacturing welding u

Under the direction of the Panel Shop Manager, the Panel Fabricator uses schematics to wire panels, control boxes, J-Boxes, PLC's, HMI's and various other electrical components. The Panel Fabricator will fabricate cut-outs in enclosures for various electrical hardware components. The use of different electrical and pneumatic hand tools is necessary to complete day-to-day tasks as is basic mechanical ability with other hand tools. Working knowledge of electrical schematics, electrical components, wire gauges, electrical standards and wiring troubleshooting skills. Reports To: Panel Shop Manager JOB QUALIFICATIONS Roles and responsibilities for this job may include but are not limited to: Reads and interprets wiring diagrams, point to point wiring schedules, and schematics. Able to spot inconsistencies in drawings and discrepancies in paperwork and to ask or answer questions during assembly process. Able to commit to a deadline or relay to Panel Shop Manager when deadlines may slip. Work closely with electrical engineering team to resolve any issues. Performs routine tasks in preparation for assembly, such as cutting wire to specified size, stripping, and fastening terminal connections. Performs wiring of electrical components and labeling of all devices and wires. Able to determine if components need repair or are unrepairable. Repair when required. Uses common hand tools to prepare and assemble components, din rail and wire duct to complete electrical panels to print. Chooses appropriate wire colors and gauges required to complete wiring to all applicable codes, specifications and regulations. Exercise safe work habits and maintain a clean and safe working area Field wiring of control cabinets into machinery if needed. Assist Engineers and Electrical Control Technicians with machine startup and debug. Arranges for packing and shipment of panels. Required Job Qualifications: High School Graduate Preferred Job Qualifications: Ability to read electrical prints/schematics Ability to use multi-meter to read voltage, current and resistance Knowledge of basic electrical theory Basic mechanical aptitude. Knowledge of electrical wiring and component connections in accordance with UL and UL508A Proficient in industry electrical code, NEC, ANSI, NFPA, and OSHA.

There's never been a better time to join Stratus! As the market leader in brand implementation and maintenance, we transform how national brands connect with their customers. From exterior signage & interior branding to site refresh & remodel, from energy & lighting to repair & maintenance solutions, we deliver ideal solutions to meet all our client's branding needs. From our locations across the country, to our corporate headquarters in Mentor, Ohio, every employee is a stakeholder in Stratus' success. This environment offers endless career opportunities for individuals with a commitment to customer service, focus on execution and bias for action. Job Summary: The Sheet Metal Fabricator is responsible for manufacturing and assembling various signs, frames, structures, cabinets, and other items designated to the metal shop for fabrication. This role involves using specialized tools, equipment, and techniques to ensure high-quality results while adhering to safety and production standards. Responsibilities Fabricate metal components using equipment such as CLN Notcher, CLN Bender, and Letter Lock Punch. Form materials into required shapes and dimensions for sign production. Install LED wiring and attach letter faces to ensure proper functionality and aesthetic standards. Perform trim-out operations on letters using the CLN Quick Trim Notcher. Complete necessary documentation, including completion slips, material listings, timecards, and requisition forms. Assist with the handling, packing, loading, securing, and unloading of finished goods to ensure safe and proper procedures are followed. Maintain flexibility in work hours, including availability for overtime as needed by management. Attend meetings and training sessions as required to stay updated on company policies and best practices. Perform necessary housekeeping tasks, including cleaning up production debris and properly storing materials and equipment. Ensure the care, maintenance, and security of all company resources, tools, and equipment. Maintain and perform routine maintenance on work machines and tools to ensure optimal performance. Qualifications Skills Proficient in aluminum spool gun welding. Basic mechanical and construction knowledge, including an understanding of metals, wood, plastic, blueprints, and fasteners. Working knowledge of CLN machines, punch presses, press shears, and various power tools used in metal fabrication. Ability to read and use a tape measure accurately. Adequate mathematical skills for fabrication tasks. High attention to detail to ensure precision and quality in all work. Ability to work effectively both independently and as part of a team. Education, experience, certifications Must be at least 18 years old. High school diploma or equivalent preferred. 1-2 years of fabrication experience required. Experience in the sign industry is a plus. Physical and mental demands Ability to stand for extended periods while operating machines and tools. Ability to lift and handle heavy materials and equipment as required. Comfortable working in a manufacturing environment with moderate to loud noise levels. Why Work With Us Supportive & Friendly Culture Manage national accounts for Fortune 500 companies Medical, Dental, Vision coverage options Flexible Spending & Health Savings Accounts Company paid Life Insurance 401k with Employer Contribution Company paid Short/Long Term Disability Generous Paid Time Off program + Holidays Career Growth Opportunities and Career Mapping Additional perks including Pet Insurance, Employee Assistance Program, Educational Assistance Program, Identity Theft Protection, Critical Illness Plans, Commuter Benefits and various employee discount offerings from our Vendors Pay Range $17- $22 hourly - Pay range listed reflects the potential pay for this role. The pay will depend on various factors, such as responsibilities of the position, job duties/requirements, and relevant experience and skills. Not all positions posted will have a pay range listed. eeo/mfdv

Schedule: Sunday through Wednesday, 8:00 PM - 6:00 AM The Opportunity Founded in 1890, The D.S. Brown Company, a Gibraltar Industries Company, is a world-wide leader and supplier of engineered products to the bridge and highway industry. Headquartered in North Baltimore, Ohio, the Company actively sells to bridge and pavement contractors, specialty subcontractors, and construction product distributors. The D.S. Brown Company prides itself on its quality workforce and its reputable products. Check us out at *************** and become part of our awesome team! We are currently seeking qualified Welders for our 3rd shift team. Who we're looking for All your life, you've been a thinker - a practical innovator with rolled-up sleeves, a strong sense of purpose and healthy dose of optimist in you. A maker who gets things done. If you dream of using technology to make a difference in the world, we want you with us. At Gibraltar, we're solving big problems and pushing the boundaries of what's possible, changing lives with smarter products and services in agtech, renewable energy and residential products that will shape a better future for people and the planet. So we're looking for more than great talent, we're looking for good people with a unique point of view - creators ready to tackle our most important challenges. If you thrive in a collaborative and inclusive culture, working side by side with talented teammates or hand in hand with customers and communities to solve real-world technology problems, we want to hear from you. What we need The ideal welding candidate will have proven ability in mig, tig or stick welding, troubleshooting skills, ability to understand weld symbols and tolerances. Past experience with blueprint reading is preferred, and a weld test will be required as part of the interview process. * High School Diploma or GED Desired Qualifications: * Previous experience welding- mig, tig, stick. * Good math skills and ability to measure parts with calipers and/or tape measure * Mechanical aptitude needed for problem solving * Ability to work overtime as needed. * Welding Certification through an educational institution preferred. What we offer Health & Welfare * Medical, dental, and vision insurance plans for employees and dependents * Health care & dependent flexible spending plans * Free Life and AD&D coverage with supplemental coverage options * Employee assistance programs focused on mental health Financial Wellbeing * Competitive compensation * Bonus opportunities * Generous 401(k) plan Flexibility & Time Off * Paid time off, including vacation, bereavement, jury duty, sick leave, disability, holidays. Community & Personal Development * Donation matching and time off to volunteer * Educational reimbursement About Us Gibraltar is a leading manufacturer and supplier of products and services for North American agtech, renewable energy, residential, and infrastructure markets. By building solutions that make life better for people and the planet, Gibraltar advances the art and science of engineering, science and technology to shape the future of comfortable living, sustainable power, and productive growing. Guided by an inclusive, values-driven culture that celebrates and rewards different perspectives, we work together to create lasting positive impact on everyone our business touches. To learn more about what makes us #GibraltarProud, visit our website: ****************** Gibraltar is an Equal Opportunity Employer; and considers applicants for all positions without regard to race, color, religion, creed, gender, gender identity, national origin, age, disability, marital or veteran status, sexual orientation, or any other legally protected status. In addition, Gibraltar will provide reasonable accommodations for qualified individuals with disabilities.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking an ASME/Hygienic Welder based out of our Spring Hope, NC office. The typical work hours are Monday thru Friday 7:00am - 5:30pm. The candidate will be responsible for: Working with the ASME and Hygienic Division. Executing ASME National Board Repairs. ASME stamped fabrication. Fitting and welding of hygienic piping systems. Perform all other additional assignments per supervisors direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Experience in GTAW, GMAW, and SMAW welding processes. Successful completion of a welding and/or skills test. Must have a great attitude and willingness to perform in a variety of scenarios. Occasional weekend work and travel is required. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking employees for our Fabrication division for our Spring Hope, NC shop. The candidate will be responsible for: Fitting and welding materials per fabrication drawings. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in fabrication. Subject to passing a welding or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking an ASME/Hygienic Welder based out of our Spring Hope, NC office. The typical work hours are Monday thru Friday 7:00am - 5:30pm. The candidate will be responsible for: Working with the ASME and Hygienic Division. Executing ASME National Board Repairs. ASME stamped fabrication. Fitting and welding of hygienic piping systems. Perform all other additional assignments per supervisors direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Experience in GTAW, GMAW, and SMAW welding processes. Successful completion of a welding and/or skills test. Must have a great attitude and willingness to perform in a variety of scenarios. Occasional weekend work and travel is required. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.