Coater jobs near me - 30 jobs

Job DescriptionSalary: $22 - $38 About the Role: The Laborer Coater supports the installation, maintenance, and replacement of steel natural gas pipelines by performing manual labor and applying protective coatings to steel pipe and fittings. This role ensures pipe integrity by preparing surfaces, applying appropriate coatings, and assisting the crew in daily construction and excavation activities under the supervision of the Crew Foreman. ESSENTIALFUNCTIONS Prepare steel pipe surfaces for coating through cleaning, scraping, grinding, or blasting as required. Apply protective coatings (e.g., epoxy, tape wrap, shrink sleeves) to field joints, welds, and fittings according to industry and manufacturer standards. Ensure coating quality by inspecting and performing holiday testing to detect flaws or holidays in the coating. Assist with pipe laying, aligning, backfilling, and trenching operations. Operate hand and power tools (grinders, wire brushes, torches, etc.) safely and effectively. Support excavation, site prep, and clean-up tasks as directed. Follow safety protocols and wear all required PPE, including flame-resistant clothing. Communicate effectively with team members and report issues or hazards to supervision. Travel to and from job sites, potentially working long hours, weekends, or in inclement weather. Additional duties as needed. Minimum Qualifications: High school diploma or GED. Five (5) years of general labor experience in construction, utility, or pipeline environments. Familiarity with coating systems and surface preparation tools. Ability to lift up to 50 lbs and perform physically demanding work. Basic knowledge of safety protocols in gas utility or pipeline construction. Valid drivers license and reliable transportation. Ability to solve conflict, create team atmosphere, dependable, and demonstrates accuracy and thoroughness. Endurance to perform physical tasks throughout the workday, including bending, stooping, kneeling, and standing for extended periods. Must be able to work in a variety of weather conditions. Preferred Qualifications: Experience applying field coatings to steel pipe in gas distribution or transmission work. OQ (Operator Qualification) certifications related to coating, pipe installation, or gas work. Confined space and trench safety training.

COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities Summary: Responsible for prep, coat and un-prep of circuit board assemblies that require conformal coating. Essential Duties and Responsibilities include the following: Other duties may be assigned. Capable of identifying type of conformal coating, cure schedule and coating requirements Demonstrate proper handling precautions when working with process chemicals and materials Pass the Respiratory Testing and Fit Test Initially and Annually Work to safe practices and use all Personal Protection Equipment (PPE) specified Demonstrate proper techniques in operation and preventative maintenance of HPLV spray gun Follow proper techniques in measuring wet film and dry film conformal coating thickness Use math skills for mixing conformal coatings to correct ratios per manufacturing instructions Review shelf life of conformal coatings and thinners prior to usage Demonstrate proper handling precautions when working with process chemicals and materials including proper disposal of general and hazardous waste Follow applicable coating requirements in performing inspections and touch-up of conformal coatings per manufacturing instructions Follow requirements for set up, 1st piece inspection and in-process audits Follow proper techniques in operation of aerosol spray can Locate and use SDS information Qualifications, Skills and Attributes Qualifications: to perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The Team Member must be able to maintain confidentiality and have good judgment. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and required physical activities. A pleasant professional image is expected at all times. Team member will be expected to exhibit high ethical standards and promote the same within the company. Physical Demands: The physical demands are representative of those that must be met by Team Member to successfully perform of the essential functions of this job. Light Work: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to lift, carry, push, pull or otherwise move objects. Constantly walk, finger, grasp, feel 90-100% of the time; frequently stoop, reach, push, lift, talk, hear and do repetitive motions 60-90% of the time. Math Ability: Ability to calculate figures and amounts such as proportions and percentages. Visual Acuity: The Team member is required to have close visual acuity to perform activities for operation of machines, including visual inspection, using measurement devices; and/or assembly of parts at distances close to the eyes. Ability or increased ability to see color, or perceive color differences, under normal lighting conditions. Work Environment: The Team member is subject to inside environmental conditions: Protection from weather conditions but not room temperature changes, there is sufficient noise to cause the worker to increase volume in order to be heard above ambient noise level. The Team member is subjected to atmospheric conditions including odors 90-100% of the time and is required to wear a full face respirator, gloves and apron. The Team Member is frequently (60-90% of the time) in a small enclosed room to perform their duties. The Team Member is required to work overtime on a constant basis Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT TT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired.

Job Title: Solvent Coater Job Status/ Grade: Hourly Location: Troy, Ohio Department: Manufacturing, Coating Reporting To: Production Supervisor Direct Reports: None Pay Range: $20.50 Plus $1.00 Shift Differential The Solvent Coater - 3rd Shift is responsible for operating a solvent adhesive coating machine to coat coils of paper, film, or foil with pressure sensitive adhesive by performing the duties listed below. 3rd Shift is 11:00pm-7:00am. ESSENTIAL JOB FUNCTIONS: Set-up coater for each operation. Places rolls of face paper and backing substrate on shafts and positions correctly on machine. Turns control dials of machines to regulate speed of substrates, temperature of drying ovens, and flow of adhesive. Operate coater at maximum speed for each product. Check pre-production (set-up) samples for correct pattern materials, web dimensions, etc. Provide test samples, as required, to Quality Assurance. Check materials pre, in process and post production using calipers and rulers. Halt production if found to be running out of specification. Accurately pick raw material, return raw material, enter labor tracking and complete rolls into the ERP system. Accurately label rolls for shipment, inventory or next process in line. Maintain accurate, neat machine reports. Report material problems to Supervisor and Quality Assurance. Recommend improvements to process and equipment. Maintain improvements to process and equipment. Resolve minor problems with equipment and process. Report major problems to Supervisor and assist in resolving. Must be able to operate forklift and clamp truck. Must be able to work with little supervision. Responsible for startup and shut down of machine. Maintain neat, orderly work area. Other duties may be assigned. QUALIFICATIONS: Required: High school diploma or general education degree (GED) Mechanical aptitude and prior machine operator experience Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Attendance/Punctuality - Is consistently at work and on time. Preferred: Background in Math/Mechanics PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is required to stand; walk; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. OTHER: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description The Coating Operator is assigned to work on a coating line and may work in one or more workstations including the face unwind, liner unwind, die, main console/winder, and quality lab. Individuals in this role may be proficient on more than one coating asset in a given location. In this role, you will work D-Team, 5:50PM-6AM, 3-1-3, 12Hr, Nights. The hourly rate for this position is $24.16 / hour. The coating line operator is responsible for leading machine set ups and changeovers, problem-solving, coordinating PM's, making decisions on machine adjustments. Primary Job Duties and Responsibilities: Activities and duties may vary dependent upon site specific needs. Essential functions may include, but are not limited to: Coating Operator Load raw material into the machine and unload the finished product. Determine and control the machine cycle varying and modifying as necessary. Perform tests and check products routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards. Meet production schedules and program production sequences for optimal productivity. Follow standard operating procedures and specifications or instructions of higher level technical personnel and monitor meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications. Report any malfunctions or abnormalities and make minor adjustments and repairs to equipment. Maintain production records and logs of equipment and product performance. Adjust set up and process operations accordingly. Follow all health, safety, and housekeeping procedures, policies and practices and consistently work in a safe manner with regard to self, co-workers, and manufacturing systems. Attend and participate in all required training. Understand and implement the quality standard procedures that relate to the role and responsibilities of a Coating Operator. Perform general housekeeping tasks and waste removal within the department/group and assists other areas as required. Continuously review current processes and search out improvement methods to improve product/process quality and reduce waste, rework, and unnecessary work that adds no value to the work or process. Support safety, quality, and continuous improvement initiatives. Teamwork: Assist and support other team members in meeting department and site goals. Participate and share in performing all tasks necessary to run the facility. Contribute and participate in team decision making. Provide support in project work and other special requests. Perform all other functions as necessary. Qualifications Minimum Requirements: High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. Previous manufacturing experience preferred Must be able to follow written and oral instruction. Must regard safety as a core value; must serve as role model for other employees and encourage adherence to safety practices, policies and procedures. Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand the root cause, then communicate / educate the team in a timely manner. Must be able to actively contribute in a team based environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. Must have demonstrated record of flexibility and dependability in order to support production and customer focus. Must be able and willing to work overtime, including short-notice requests. Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. NOTE: The physical requirements of this role may vary by location. A detailed listing of the physical requirements may be obtained from the local Human Resource contact or the site Occupational Health Nurse. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

**SECOND SHIFT** You will be the Optical Coater for the Optical Components Center (OCC) within Lockheed Martin Missiles & Fire Control (MFC) in Orlando, FL. Our team drives the production of advanced optical components-coatings, polished lenses, prisms, mirrors and test plates-that enable the world's most sophisticated weapon and sensor systems. What You Will Be Doing As the Optical Coater, your responsibilities will include but are not limited to: Your responsibilities will include Interpreting manufacturing process plans, engineering drawings, and MIL specifications to perform coating, polishing, grinding and diamond‑turning of lenses, prisms, mirrors, shop aids and test plates. Operating and maintaining coating equipment for single‑ and multi‑layer thin‑film applications, ensuring repeatable thickness and optical performance. Performing visual inspections, metrology checks, and documentation of all process parameters and results in electronic tracking systems. Troubleshooting coating defects, adjusting process variables, and implementing corrective actions to sustain quality and yield. Following safety protocols, PPE requirements and environmental regulations at all times. Supporting 1st, 2nd or 3rd shift schedules as required by the UAW collective‑bargaining agreement. Collaborating with engineering, quality, and manufacturing teams to drive continuous‑improvement initiatives, including process automation and waste reduction. Assisting with inventory control of coating consumables, substrates and tooling. Participating in cross‑training programs to increase workforce agility and eliminate single points of failure. Why Join Us Do you want to be part of a company culture that encourages employees to build their career, leverage their knowledge while using cutting edge technology, and achieve challenging goals? We provide the foundation and resources to help you stay motivated, inspired, and productive. If you are driven, dedicated, and enjoy doing what you love, then we want you to join our journey and build a better tomorrow with you. Further Information About This Opportunity This position is in Orlando. Discover more about our Orlando, Florida location. MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. Basic Qualifications -Must have the ability to work 1st, 2nd, or 3rd shift according to the collective bargaining agreement. -Experience using hand tools, or precision machining tools. -The ability to test parts to ensure they meet finished specifications. -The ability to clean all types of optical elements to specified optical specifications. -Must have the ability to read and follow written work instructions, schematics and engineering drawings and work effectively in a team environment. -Due to facility requirements, must be a U.S. Citizen Desired skills Prior experience with optics at the technician level is strongly desired. Experience with optical alignment and optical metrology. Experience with optical coating. Experience with interferometers and spectrometers. Experience working as an optician with CNC machines. Familiarity with the following items is desired: optical elements, lenses, rough and finish grind flats, mirrors, shop aids, test plates, and special shaped elements. Experience with controlling contours, thickness wedge and surface quality. Experience with MIL-PRF-13830B and other related Optical MIL specifications. search terms: thin film / thin film coating / coating chambers / optical coating / optician Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

Painter / Powder Coater | Pay Rate: $20.00-$24.00 per hour | Schedule: 1st Shift M-Th 6:00am-4:00pm | Full-TimeWhat Matters MostCompetitive Pay of $20.00-$24.00 per hour based on experience. Schedule: 1st Shift, Monday-Thursday, 6:00am-4:00pm. Full-time position with a consistent 40-hour workweek. Opportunity to work with a quality-focused manufacturing team. Positive, employee-centered work environment.Job DescriptionAs a Painter / Powder Coater, you will be responsible for powder coating and painting a variety of manufactured products to meet quality and performance standards. This role plays a key part in product appearance, durability, and customer satisfaction. You'll work in a collaborative manufacturing environment that values precision, teamwork, and continuous improvement.ResponsibilitiesOperate powder coating and paint systems, including loading and spraying powder or paint. Hang and unhang uncoated products prior to finishing. Operate curing ovens and monitor proper bake cycles. Perform setup tasks such as changing powders/paints and adjusting spray equipment. Inspect finished products to ensure quality standards and specifications are met. Assist with troubleshooting and basic maintenance of coating equipment. Support and train team members in powder coating and painting processes. Maintain a clean, safe, and organized work area. Follow all safety procedures, including Lockout-Tagout (LOTO) requirements.Qualifications and RequirementsHigh School Diploma, GED, or trade school experience preferred. 1-5 years of experience in powder coating, painting, or a related manufacturing role. Familiarity with mechanical, electrical, hydraulic, and pneumatic systems preferred. Lockout-Tagout (LOTO) training required or willingness to obtain. Ability to read instructions, machine drawings, and technical documentation. Strong communication skills and attention to detail. Ability to perform basic math functions and follow detailed instructions. Ability to stand, walk, bend, stoop, and lift up to 35 lbs regularly. Good visual acuity for color, detail, and finish inspection.Benefits and PerksPay Rate: $20.00-$24.00 per hour. Schedule: 1st Shift, Monday-Thursday. Stability: Full-time, 40-hour workweek. Environment: Positive, team-oriented manufacturing facility. Growth: Opportunity to expand technical and finishing skills.Your New OrganizationThis organization values quality, teamwork, and continuous improvement. You'll join a diverse and energetic manufacturing team that takes pride in producing high-quality products while fostering a supportive, employee-centered workplace.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment. In the spirit of pay transparency, we want to share the base salary range for this position is $20.00 -$24.00/hour, not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth.

Job Title: Powder CoaterLocation: Columbus, Ohio 43230 (Gahanna) Rate: Starting at approximately $20/HR, negotiable based on experience Shifts: 2nd Shift: Monday - Thursday, 3:15 PM - 1:45 AM (4 x 10-hour days) Training: Monday - Friday, 7:00 AM - 3:30 PM (Training period TBD) Position Overview: The Powder Coater plays a key role in producing high-quality, precision-finished products in a fast-paced job shop environment. This position is 90-day temporary to permanent and works alongside experienced, dependable team members. Training will be provided to learn powder coating processes on both conveyor lines and batch booths. Applicants must complete an print test and interview. Position Responsibilities: Perform manual powder coating (non-automated) on conveyor systems Tape/mask parts using heat-resistant tape; plug and cap components as required Use an Exacto knife and demonstrate fine tactile skills Load and unload parts from conveyor lines Follow detailed instructions and retain process knowledge Read and interpret prints and schematics Maintain high attention to detail to ensure defect-free products Assist various departments as needed based on production needs Participate in cross-training across the shop Maintain a clean, safe, and organized work area Uphold fast-paced job shop standards and meet physical demands of the role Position Requirements: Minimum 2+ years of powder coating experience, preferably manual spraying on a conveyor system Previous experience in a manufacturing or job shop environment Ability to read and understand drawings, schematics, and work instructions Familiarity with hand tools; ISO knowledge helpful High school diploma or equivalent Strong print reading and interpretation abilities Ability to follow precise instructions and maintain accuracy Competency in using basic hand tools and preparation equipment Ability to learn powder coating operations on both conveyor and batch systems Other Requirements: Must pass print test and interview Tobacco-free and substance-free workplace Overtime may be required Must meet all pre-employment screening requirements

SUMMARY: The Coater apprenticeship on the coating line is a two-year program. The coater apprenticeship will be responsible for learning correct procedures for set-up, operation, maintenance, and troubleshooting problems on all equipment on the coating line. They must also learn how to safely use all equipment on coating line. In order for the apprentice to remain in the program, they must demonstrate dependability, enthusiasm, cooperation and an ability to perform the duties of the job in an efficient and capable manner. Excessive lateness or absences result in the cancellation of the program. The apprentice must maintain a written log of work performed and other pertinent information. Must be the site leader in living and driving the Company Core Values and High-Performance Work Culture. ESSENTIAL DUTIES AND RESPONSIBILITIES: Learn the proper use of tools and proper mechanical methods Learn the Company's safety rules and participate in safety audits Learn and understand Lockout/Tagout points for each machine Learn fire protection plan and action (training and supervisory) Learn responsibility for assigned maintenance schedule Learn responsibility for set up and operation of all welded can line equipment Learn work order and production tracking systems Display good housekeeping practices - must keep equipment and area clean and orderly Report mechanical problems Maintain and lubricate equipment Make minor mechanical repairs to keep machinery running until full repair can be implemented Be receptive to instructions, take notes, ask questions, and be pro-active Must be able to use efficiently, micrometer, Vernier, dial indicator, and general tools Follow company personnel and product safety requirements including standards such as those from SQF and internal GMP's Willing to help wherever needed Travel is required as needed for this position All other duties as assigned SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities requires the following: * Operate the stacker on all lines * Recognize and identify common coating and litho defects * Be Trained on the forklift * Operate the waxer * Mix Inks * Make plates * Feed on litho presses EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Better than average mechanical ability. Testing will be done to determine math and reading levels. Mechanical aptitude will be tested. Additional courses may be required as deemed necessary by management. Training will be done on the job and/or through courses at local schools and/or colleges. It may be necessary to attend classes outside of scheduled work hours. Successful completion of all classes is necessary for the apprentice to remain in the program. LANGUAGE SKILLS: Ability to read, write, and comprehend simple instructions, short correspondence, and memos in English. Ability to effectively present information in one-on-one and small group situations. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure; using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, and diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS: While performing the duties of this job, the employee is frequently required to stand, walk, and sit; use hands and fingers to handle and feel; reach with hands and arms; climb, balance, and hear. The employee is frequently required to climb, balance, stoop, kneel, and crouch. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this position, the employee is exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock and vibration. The noise level in the work environment is usually loud. NOTE: This identifies the general nature and scope of work to be performed. Independent Can reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Independent Can. This job description is subject to change based on the needs of the position and/or the Company.

A manufacturing company is seeking an individual to set-up and operate a machine that applies coating materials to a variety of rolled substances. This company works on a 2-2-3 rotating shift, so you work 2 days, then you'll be off 2 days, and then you work 3 days.

Operate powder coating paint booth to produce defect-free parts Apply proper powder coating techniques to meet quality and finish standards Set, operate, and document dry-off and cure oven parameters Monitor and control powder usage to minimize waste and rework Perform accurate job logging and powder usage documentation per run Optimize coating processes to improve throughput and operational efficiency Complete booth cleanups and color changeovers efficiently and correctly Clean paint booth trays and equipment daily and between setups Properly store paints to prevent cross-contamination and material loss Identify and report powder gun or equipment maintenance issues promptly

Now Hiring: Epoxy Coater - Multiple Shifts | Aurora, OHHours & Shifts Available: 1st Shift: Monday-Friday, 6:00 AM to 2:30 PM 2nd Shift: Monday-Thursday, 2:00 PM to 12:30 AM Weekend Shift: Friday: 2:00 PM to 2:00 AM Saturday: 11:00 AM to 11:00 PM Sunday: 11:00 AM to 11:00 PM Paid for 40 hours while working 36 Location: Aurora, OH Pay & Benefits: $19-21 per hour, depending on experience Contract-to-hire opportunity with long-term stability Excellent benefits upon hire: 100% employer-paid medical, dental, and life insurance (employee only) 401(k) with match (100% of first 3%, 50% of next 2%) Paid holidays and time off Modern, well-organized, and safety-focused work environment Job Responsibilities: As an Epoxy Coater, you'll work with a specialty coating machine to finish custom fabricated electrical enclosures. This role is ideal for someone with prior coating or spray experience who enjoys hands-on, detail-driven tasks. Key duties include: Mixing and preparing epoxy coating materials Operating the coating machine and loading/unloading parts Performing quality checks and visual inspections throughout the process Monitoring material flow and machine operation Maintaining a clean, organized workspace Ensuring all safety and handling procedures are followed Required Qualifications: 6 months to 1 year of prior painting or coatings experience required (automotive, spray painting, industrial, etc.) Comfortable working with epoxy coating materials Ability to stand for long periods and lift up to 50 lbs Good hand-eye coordination and attention to detail Ability to follow verbal instructions and work independently No blueprint reading, calipers, or micrometer use is required for this role.Workplace & Culture: You'll be part of a fast-growing, high-tech company producing custom power systems for top-tier global clients. Facilities are modern and well-equipped with robotics, lasers, and press machinery. Despite high demand, the company maintains a clean, structured work environment and strong team atmosphere. Employees are valued, and long-term opportunities are available for those who show reliability and initiative.Pre-Employment Requirements: 5-panel drug screen Background check Dress Code & Safety Gear: Steel-toe boots, jeans, and t-shirt required Safety glasses and additional gear provided as needed

Responsibilities: Follow all Safety rules and required PPE Be willing to learn all aspects of line both coater operator and Re-wind operator Will learn Mobile equipment for job tasks Keep a clean work environment for safety reasons Communicate with the Operators and Leads, exchange information with the incoming shift PM tasks on machine when needed Communicate issues or restraints to the Supervisor Follow quality processes and call out anything out of sorts Basic Qualifications: High School Graduate or GED. Be passionate about maintaining a safe work environment Good attendance record Physical Requirements - Bending, crawling, stooping, standing, vision, lifting (minimum of 50lbs.), walking, Ability to stand for standard 8-hour shift or longer Cognitive skills needed to complete tasks, including abilities such as learning, remembering, focusing, categorizing, and integrating information for decision making, problem-solving, and comprehending Ability to work assigned shift including overtime and weekends, as needed Must be authorized to work in the U.S. Preferred Qualifications: Experience in a packaging or other manufacturing environment Licensed to drive a lift truck, but will train if not already licensed

Join our dynamic team as a Painter/Powder Coat Operator. If you're passionate about craftsmanship and eager to make an impact, we want to hear from you! What you'll do * Prepare surfaces for painting/coatings * Apply paint and coatings using various techniques. * Collaborate with team members on projects to ensure high-quality finishes * Maintain a clean and organized work environment while adhering to safety protocols * Participate in lean manufacturing practices to enhance efficiency in operations Basic qualifications * Attention to detail with quality awareness. * Basic math skills. * Ability to work standing. * Lifting up to 50# We are committed to creating a stable work environment that fosters the development of your skills for a long-term career, with opportunities for advancement. Job Category: Manufacturing Job Type: Full Time Job Location: 1370 Lavelle Drive Shift: 1st Apply for this position Twist, Inc. and Twist Aero are equal opportunity employers.

Job Title: Powder Coater - 2nd Shift Rittal is a leading global provider of solutions for industrial enclosures, power distribution, climate control, and IT infrastructure, as well as software and services. The company is a member of the Friedhelm Loh Group, a successful international player with 18 production plants, 80 subsidiaries, and 12,000 employees. Rittal LLC has built a strong tradition of innovation and takes pride in a progressive approach to engineering. We design and manufacture the world's leading industrial and IT enclosures, racks, and accessories, including high-efficiency, high-density power management, and climate control systems for industrial, data center, outdoor, and hybrid applications. Primary Activities/Duties: Prepare metal parts for powder coating by cleaning, masking, and hanging them on racks. Operate powder coating equipment to apply paint according to specifications. Inspect finished products for quality, coverage, and consistency. Maintain proper documentation of production and quality checks. Perform routine maintenance and cleaning of painting equipment and spray booths. Follow safety procedures and wear appropriate PPE at all times. Assist with loading/unloading parts from the curing oven. Support department housekeeping and 6-S initiatives. Participate in cross-training and internal audits as needed. Knowledge & Experience: HS Diploma or GED strongly preferred. Prior experience in industrial painting or powder coating preferred. Ability to read and interpret work instructions and safety guidelines. Basic computer skills; familiarity with Microsoft Office Suite including Outlook. Strong attention to detail and ability to work in a fast-paced environment. Ability to lift and move parts and equipment as required. Safety Requirements: Wear safety-toed footwear Safety glasses with side shields Hearing protection Other (PPE) where required. Work Environment: Warehouse and manufacturing areas with exposure to hot and cold temperatures, dust, and noise. #MFG If you require reasonable accommodation for any part of the application or hiring process due to a disability, you may contact the company's Human Resources Department at **************. This option is reserved for individuals who require accommodation due to a disability. Rittal LLC and Eplan are proud to be an affirmative action/equal opportunity employer. EEO, including Disability/Vets.

INFINIUM Wall Systems is a family-owned turn-key manufacturer of interior Glass Wall Systems headquartered in Strongsville, OH. Founded in 2003, INFINIUM has experienced significant strategic growth fueled by world class People, Products, and Process. INFINIUM has built a great reputation in the industry for saying what we do and doing what we say. We are the pioneers of the direct business model which is now adopted by many in the industry. INFINIUM has an immediate need for a conscientious, hardworking, and dedicated Professional Painter and Powder Coater to join our team with the following: Job Summary: We are looking for a skilled Professional Painter and Powder Coater to paint and powder coat various surfaces. Responsibilities: 1. Reading blueprints/instructions and examining surfaces to determine the kind and amount of work necessary. 2. Making on-site preparations such as building scaffolding, covering fixtures etc. 3. Preparing walls and other surfaces for painting by scraping, using sandpaper, removing old paint etc. 4. Mixing paint and other materials to prepare the right color or texture. 5. Painting surfaces using brushes, spray guns, or paint rollers. 6. Applying varnish and other finishes to preserve the quality of the paint job and enhance the final appearance. 7. Preparing and applying powder coating to metal and wood substrates. 8. Operating powder coating equipment and ensuring it is in good working order. 9. Inspecting finished surfaces to detect flaws and ensure quality. 10. Conducting routine maintenance to keep painting and powder coating equipment clean and in good working order. 11. Complying with all safety guidelines to ensure a safe working environment. 12. Follow safety protocols and always wear appropriate personal protective equipment (PPE). 13. Participate in continuous improvement and safety activities to streamline production processes and enhance product quality. Qualifications: 1. Proven experience as a Professional Painter and /or Powder Coater, ideally in the industrial/commercial sector. 2. Exceptional knowledge of painting and powder coating material and how to select, mix and apply them. 3. Solid knowledge of commercial finishing and refinishing in a construction environment. 4. Aptitude in using appropriate tools (brushes, sprayers, tooling for hanging parts etc.). 5. Conscientious with great attention to detail. Competencies: 1. Ability to stand, walk, bend, and climb for extended periods. 2. Ability to lift and carry heavy equipment and materials. 3. Valid Driver's License 4. High school diploma or equivalent. 5. Forklift Operation Certification will be considered a plus. 6. Ability to lift heavy objects up to 50 pounds. 7. Ability to occasionally travel overnight. Work Schedule: This is a full-time position requiring 40 hours per week. Overtime may be required with reasonable notice. Career Growth: Our company values our employees and offers career growth opportunities for high-performing associates. You will have the opportunity to gain experience and develop new skills within the plant. We also offer training programs to enhance technical skills and promote personal development. The appropriate compensation package will be designed for the right candidate and will include health care, 401K plan, paid vacation and a yearly profit-sharing bonus opportunity. Candidates who do not meet every qualification are encouraged to apply. Infinium will train the right candidate. INFINIUM is an equal opportunity employer offering a team-oriented, open, and enjoyable work environment.

As a Coating operator you will be assigned to work on a coating line. You may work in one or more workstations, including the face unwind, liner unwind, die, main console/winder and Quality lab. You may be proficient on more than one coating asset in a given location. You will be responsible for leading machine set ups and changeovers, problem-solving, coordinating preventative maintenance (PMs) and making decisions on machine adjustments. This role is for C Team (7:00 p.m. - 7:00 a.m.) rotating. This posting is for the Fairport Harbor facility and is subject to shift alignment. All interested individuals are encouraged to apply, with those currently in the Fairport Harbor Coating department receiving first consideration. In this important role, you will also be responsible for: * Loading raw material into the machine and unloading finished product. * Determining and controlling the machine cycle, varying and modifying as necessary. * Performing tests and checking product routinely for multiple characteristics, using standard measuring devices and making some judgments against standards that are not readily measurable. * Meeting production schedules and programming production sequences for optimal productivity. * Following standard operating procedures and specifications or instructions of higher level technical personnel. Monitoring meters, gauges, valves, flow ratios, temperatures, pressures and related controls and guidelines to ensure adherence to production/process specifications. * Maintaining production records and logs of equipment and product performance. * Following all health, safety and housekeeping procedures, policies and practices. Consistently working in a safe manner with regard to self, co-workers and manufacturing systems. * Supporting safety, quality and continuous improvement initiatives. * Teamwork: Assisting and supporting other team members in meeting department and site goals. Participating and sharing in performing all tasks necessary to run the facility. Contributing and participating in team decision making. Providing support in project work and other special requests. * Perform all other functions, as necessary. What we will be looking for in you: Essential: * Previous manufacturing experience preferred. * You will regard safety as a core value; serving as role model for other employees and encouraging adherence to safety practices, policies and procedures. * You will need to have a strong service and quality focus; addressing issues effectively when problems arise and taking initiative to understand root cause, then communicating / educating the team in a timely manner. * You will need to be able and willing to work overtime, including short-notice requests. * You will be required to show proficiency with computer applications. Required: * High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Job Title: Emulsion Coater Job Status/ Grade: Hourly Location: Troy, Ohio Department: Manufacturing, Coating Reporting To: Plant Supervisor Direct Reports: None Pay Range: $20.50 Plus $1.00 Shift Differential Job Summary: The Emulsion Coater Machine Operator - 2nd Shift is responsible for operating an emulsion acrylic adhesive coating machine to coat coils of paper, film, or foil with pressure sensitive adhesive by performing the duties listed below. 2nd Shift is 3:00pm - 11:00pm. Essential Job Functions: Set-up coater for each operation. Places rolls of face paper and backing substrate on shafts and positions correctly on machine. Turns control dials of machines to regulate speed of substrates, temperature of drying ovens, and flow of adhesive. Operate coater at maximum speed for each product. Check pre-production (set-up) samples for correct pattern materials, web dimensions, etc. Provide test samples, as required, to Quality Assurance. Check materials pre, in process and post production using calipers and rulers. Halt production if found to be running out of specification. Accurately pick raw material, return raw material, enter labor tracking and complete rolls into the ERP system. Accurately label rolls for shipment, inventory or next process in line. Maintain accurate, neat machine reports. Report material problems to Supervisor and Quality Assurance. Recommend improvements to process and equipment. Maintain improvements to process and equipment. Resolve minor problems with equipment and process. Report major problems to Supervisor and assist in resolving. Must be able to operate forklift and clamp truck. Must be able to work with little supervision. Responsible for startup and shut down of machine. Maintain neat, orderly work area. Other duties may be assigned. Qualifications: Required: High school diploma or general education degree (GED) Mechanical aptitude and prior machine operator experience Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Attendance/Punctuality - Is consistently at work and on time. Preferred: Background in Math/Mechanics Physical Requirements: The Machine Operator physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is required to stand; walk; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment: The Machine Operator work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

Job Description Operate powder coating paint booth to produce defect-free parts Apply proper powder coating techniques to meet quality and finish standards Set, operate, and document dry-off and cure oven parameters Monitor and control powder usage to minimize waste and rework Perform accurate job logging and powder usage documentation per run Optimize coating processes to improve throughput and operational efficiency Complete booth cleanups and color changeovers efficiently and correctly Clean paint booth trays and equipment daily and between setups Properly store paints to prevent cross-contamination and material loss Identify and report powder gun or equipment maintenance issues promptly

Avery Dennison (NYSE: AVY) is a global leader in labeling and packaging materials and solutions. Each distinctive product and technological leap forward is brought to light in an energizing environment where teamwork and curiosity thrive. Looking for a collaborative culture where bold ideas turn into action? Then this is the place for you! With over 25,000 employees in more than 50 countries, we're inspired by the art of the possible, and motivated to continuously improve. Job Description This is a Coating Operator Job. Qualifications Must know how to operate coaters. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines.