Coating inspector entry level jobs

Job Titles: Quality Inspector Shift time: Monday - Thursday - 2nd shift - 3:30pm - 2am Performs new and routine inspections, checks, tests and sampling procedures of standard parts. Responsible for receiving, in-process, or final inspections as required. Duties and Responsibilities Responsible for utilizing aptitude in measurement techniques, metrology, and blueprint reading and verify operators are accurately measuring and recording dimensions on IP sheets or other documentation. Perform first article and first piece approval for operators. Perform inspection duties for in-process and final inspection. Complete and review non-conformance documentation. Support quality improvement and cost savings initiatives, as required. Assist Quality Engineers, as required. Assist in other production areas, as needed. Perform other quality or document control duties, as assigned. Perform part measurement on CMM.

Department: Construction/CEI Employment Type: Full Time Reporting To: Ron Quesenberry Description True Inspection Services, LLC, a subsidiary of The Mannik and Smith Group, specializes in construction inspection and management. Our expertise in inspecting asphalt and concrete roadways, as well as in bridge construction and rehabilitation, and coatings, enables us to contribute to vital infrastructure projects. We collaborate with public and private sectors, including state transportation departments, counties, and municipalities, across Ohio and beyond. We are excited to announce that we have been selected to participate in the Brent Spence Bridge Corridor Project in the Cincinnati area! Join us on our growth journey as we seek an experienced ODOT Prequalified Coatings Inspector to join our team and be a part of one of the nation's most significant transportation transformations. This is a multi-year project that will begin in the spring of 2026. Key Responsibilities 1. Maintains records of all work completed. 2. Uses the necessary testing equipment to record the conditions under which the work was done and makes independent measurements of coating dry film thickness. 3. Inspects, observes, and documents the surface preparation and sealing of concrete surfaces for quality assurance and to ensure contractor compliance with the sealer specifications, plans, and/or proposals. 4. Notifies the Contractor of non-conforming work. 5. Records the conditions under which the work was completed. 6. Performs data entry into ODOT's CMS/SITE MANAGER system or local documentation equivalent as directed by the Project Engineer or LPA person in responsible charge (as defined in the LPA participation requirements chapter of the Locally Administered Transportation Projects (LATP) Manual of Procedures). 7. Complete special projects and other duties as may be assigned. Skills, Knowledge and Expertise ODOT Prequalification is required: * Successful completion of the Department's ODOT Work Type 26 Structural Steel Painting Course. * Successful completion of the Department's ODOT Work Type 57 Sealing of Concrete Surfaces Course. * Successful completion of one (1) of the following requirements: * National Association of Corrosion Engineers (NACE) Certified Coatings Inspector Level 1 Certified * Society for Protective Coatings (SSPC) or Association of Materials Protection and Performance (AMPP) Protective Coatings Inspector Level 1 Certified * Society for Protective Coatings (SSPC) or Association of Materials Protection and Performance (AMPP) Bridge Coating Inspector Level 1 Benefits * 401(k) w/ company match * Health insurance w/ HSA option, Vision, Dental, Life * Flexible schedule * Paid time off * Referral program * It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws.

Job DescriptionDescriptionTrue Inspection Services, LLC, a subsidiary of The Mannik and Smith Group, specializes in construction inspection and management. Our expertise in inspecting asphalt and concrete roadways, as well as in bridge construction and rehabilitation, and coatings, enables us to contribute to vital infrastructure projects. We collaborate with public and private sectors, including state transportation departments, counties, and municipalities, across Ohio and beyond. We are excited to announce that we have been selected to participate in the Brent Spence Bridge Corridor Project in the Cincinnati area! Join us on our growth journey as we seek an experienced ODOT Prequalified Coatings Inspector to join our team and be a part of one of the nation's most significant transportation transformations. This is a multi-year project that will begin in the spring of 2026. Key Responsibilities1. Maintains records of all work completed. 2. Uses the necessary testing equipment to record the conditions under which the work was done and makes independent measurements of coating dry film thickness. 3. Inspects, observes, and documents the surface preparation and sealing of concrete surfaces for quality assurance and to ensure contractor compliance with the sealer specifications, plans, and/or proposals. 4. Notifies the Contractor of non-conforming work. 5. Records the conditions under which the work was completed. 6. Performs data entry into ODOT's CMS/SITE MANAGER system or local documentation equivalent as directed by the Project Engineer or LPA person in responsible charge (as defined in the LPA participation requirements chapter of the Locally Administered Transportation Projects (LATP) Manual of Procedures). 7. Complete special projects and other duties as may be assigned. Skills, Knowledge and ExpertiseODOT Prequalification is required: Successful completion of the Department's ODOT Work Type 26 Structural Steel Painting Course. Successful completion of the Department's ODOT Work Type 57 Sealing of Concrete Surfaces Course. Successful completion of one (1) of the following requirements: National Association of Corrosion Engineers (NACE) Certified Coatings Inspector Level 1 Certified Society for Protective Coatings (SSPC) or Association of Materials Protection and Performance (AMPP) Protective Coatings Inspector Level 1 Certified Society for Protective Coatings (SSPC) or Association of Materials Protection and Performance (AMPP) Bridge Coating Inspector Level 1 Benefits 401(k) w/ company match Health insurance w/ HSA option, Vision, Dental, Life Flexible schedule Paid time off Referral program It is the policy of our company to follow equal employment opportunity procedures in compliance with federal, state and local criteria. We will provide all applicants for employment, and all employees, with equal opportunity without regard to race, color, religion, national origin, age, sex, height, weight, marital status, arrest record, disability, pregnancy, sexual orientation, gender identity or expression, genetic information, military or veteran status, and/or any other protected classes covered by any local, state and federal laws.

PITT OHIO, a $900 million, high service, highly profitable, transportation solutions provider offering SUPPLY CHAIN, LTL and TRUCKLOAD services is seeking a Freight Inspector Weights and Measures at our Cincinnati, OH Terminal. Moved to Top Rate $28.05/hour after 6 months We offer overtime IMMEDIATELY after 40 hours worked. This position does not require any prior experience! Our team will provide on the job training. PITT OHIO has received countless safety, service, and carrier of the year awards and our highly acclaimed Safety Department is a leader in the transportation industry. Dedication to quality and excellence is our goal at PITT OHIO. We offer competitive wages, medical and prescription insurance with no weekly premiums, vision, dental, 401K, profit sharing, vacation paid at 45 hours per week, pleasant work environment, and much more! Responsibilities Essential Duties Measure freight and enter information into the computer system Perform simple mathematical calculations regarding freight measurements Look up and apply correct classifications to the freight Generate and submit reports regarding freight weights and measures Process all paperwork daily associated with the execution of the job Lift various types of materials including cartons, bags, cylinders, boxes, crates, drums, pipe, bars, rugs, etc. Use common material handling tools will be used (carts, dollies, pallet jacks, and tow motors) to move freight for inspection purposes Work in a safe and professional manner to reduce personal risks and risk to fellow employees Comply with federal, state, and company regulations Be available and willing to work; exceptions require management approval Work in a positive, supportive, and cooperative way at all times Perform other duties as directed or requested Qualifications Minimum Requirements: Previous experience not required Must have command of the English language with the ability to read, write, and communicate effectively with internal and external customers, and perform simple mathematical calculations Must be self-motivated and able to self-manage Ability to use Microsoft Office tools (Excel, Outlook, etc) Standing, walking, pushing, pulling, twisting, carrying, bending, reaching, and lifting both above and below waist level will be required. Heavy lifting will be required. Must possess good math and typing skills A minimum age of 18 years of age. Must pass a NON -Department of Transportation (DOT) physical examination. Must consent to a pre-employment drug screen. PITT OHIO must receive a negative result. Must consent to a ten-year check on work history. Any gap of 30 days or more must be indicated and explained, and you may be asked to provide documentation. Discrepancies may prevent your application from being processed and job offer withdrawn. You will be an at-will employee throughout your employment with PITT OHIO. Nothing in these guidelines, your application or in the employee handbook guarantees employment for any period of time or is intended to be a contract of employment. PITT OHIO is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or other legally protected status. #POE2 Pay Range Starting from USD $24.99/Yr.

Job Details Mid-State Basement Systems, LLC - Columbus, OHDescription Mid State Basement of Ohio looking for a new Sales Consultant to add to our growing team! Mid State Basement of Ohio is your trusted local team for wet basement, crawl space, and foundation repair. We recognize the importance of healthy, functional below-grade spaces and how they affect the rest of your home. We specialize in improving your home's energy efficiency, safety and indoor air quality with Basement Waterproofing, Crawl Space Repair, Sump Pumps, Foundation Repair, And more! The Company: Mid State Basement of Ohio is one of the leading basement and crawl space waterproofing companies in the region. At Mid State Basement of Ohio, our employees come first. We pride ourselves on providing a work environment that is both supportive and welcoming. Our company values: One Team, One Experience, One Passion and One Community, which are what drive us to be the best company we can be, both for our employees and our customers! The Position: We are looking to add a new Sales Consultant/Inspector to our team. As a Consultant, you will meet with potential customers on appointment through quality, company-generated leads to determine the customers' needs and provide solutions to resolve their problems, ultimately restoring them to a safe and comfortable living environment. We Have: A vehicle to travel to the customers homes A cell phone and a laptop Warm leads, they called us to come out A comprehensive training program, which allows you to fully understand every aspect of the job BEFORE you are sent out into the field An environment which breeds success A team of aces to work with An open mind for new ideas and methodologies A competitive benefits package: medical, dental, vision, 401k, earned time off, etc. Full Benefits Anthem Blue Cross Blue Shield Commission based pay after training period 8-10% per job sold Strong listening, follow-up, and closing skills Proficiency working with basic computer software Precise attention to detail The ability to work alone and as part of a team Strong ethics and high integrity Commitment to ALWAYS putting the customer first Job Type: Full-time Pay: $50,000.00 - $130,000.00 per year

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

This is a Part-Time Lane Inspector Position. Opus is a world-leading vehicle inspection and intelligent vehicle support company that has been contributing to a safer and cleaner world since the company was founded in 1990. We take pride in helping make our world a safer and cleaner place. Duties and Responsibilities: Lane Inspector - Vehicle Emissions testing. You will play an important role in limiting the production of Emissions by identifying the polluting vehicles. As a lane inspector, YOU will be responsible for the following: * Perform emission inspection functions following established procedures, and enter and verify vehicle information with computer data. * Operate vehicles during the emissions system test and use exhaust analysis equipment. * Direct motorists in and out of the station, provide test results, instruct customers on next steps in the inspection process, and collect inspection fees. * Other job duties as assigned. No experience required; we will train you! Requirements: * Must be 18 years of age. * Valid and unrestricted driver's license. * Physically able to stand, bend, stoop, kneel, and balance unassisted for extended periods of time. * Physically able to lift, push, and pull up to 20 lbs on an occasional basis. * Basic computer skills. * Saturday availability required - (State & Program Specific) * Part-time hours requirement is between 20 - 30 hours a week. - (State & Program Specific) Qualifications: * Team player. * Excellent customer service skills. * Ability to work efficiently and multitask in a fast-paced, busy shop environment with a smile and positive attitude. * Work in an environment that includes vehicle exhaust fumes, noise, and heat. * Work in all weather conditions. * Work safely around operating motor vehicles. All offers of employment are contingent upon completing and meeting the criteria of a background check, drug screening, and I-9 verification.

Fluorescent Penetrant Inspector (FPI) If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Eastlake is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit ************************ WHAT WE HAVE TO OFFER * Weekly Pay for Hourly Employees * Comprehensive Benefit Plans * Quarterly Bonus Opportunity * 401k with Company Match * Emphasis on Employee Engagement * Paid Holidays and Vacation Time * Tuition Reimbursement JOB SUMMARY Perform required duties relating to penetrant processing of product. PRIMARY RESPONSIBILITIES * Set up and calibrate equipment such as FPI processing line, PSM-5 panels, and black lights. * Help conduct tests, interpret, evaluate, and document data in accordance with codes, standards, and other contractual documents. * Identify and implement improvement opportunities. QUALIFICATIONS * Education: High school Diploma or general education degree (GED). * Experience: Manufacturing experience preferred. * Certifications/Licenses: N/A * Other Required Knowledge, Skills & Abilities: Read. Write legibly. Basic math skills. Good written communication skills. Good verbal communication skills. Good problem-solving skills WORKING ENVIRONMENT * Working Environment: Manufacturing/Factory environment. * Required PPE: Check for required PPE in areas you may be working in * Safety Glasses: Needed in all areas of the plant. * Shoes/Boots: Steel toed needed in all areas of the plant. NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management position This is a full time position

NOFS (Northern Ohio Field Services) is currently seeking an experienced Mortgage Inspector to join our growing team in Lucas County, Ohio. As a Mortgage Inspector at NOFS, you will be responsible for conducting inspections on residential properties to ensure occupancy status. This is a Contractor Other position and the successful candidate will work independently, without supervision, to complete assigned tasks accurately and efficiently. Compensation & Benefits: We offer a fee for each inspection. This fee varies by location and volume. You can expect to earn between $20 and $30 per hour. As a contractor, you will also have the opportunity to set your own schedule and work autonomously. Responsibilities: - Conduct residential property inspections to ensure occupancy status, deliver delinquency letters, conduct insurance inspections - Utilize inspection software and tools to document and report findings - Take photos of properties and deliver documents as needed - Complete inspections within designated timelines and meet performance metrics - Communicate with account manager in a professional manner - Keep up to date with industry regulations and guidelines - Maintain accurate records and documentation of inspections - Maintain professionalism at all times. Requirements: - Drivers License, insurance and reliable transportation. Must pass background check to obtain Aspen Grove number, not reimbursed. - Prefer 6 months in the inspections field, or working as a 1099 employee - Strong attention to detail and excellent time management skills - Proficient with technology and able to learn new software and tools quickly - Excellent communication and customer service skills - Ability to work independently and meet deadlines - Ability to travel to various properties in the Fort Wayne area, to include entire county of Allen EEOC Statement: At NOFS, we are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Will promote a safe working environment. Understands and adheres to all Silgan safety policies and procedures to prevent injury to self and co-workers. Will have the immediate responsibility to assure that finished goods meet or exceed our customers; expectations. The Inspector will be responsible for finding classification of typical defects encountered. Critical defects are defects which is likely to cause failure of the package to the point where the package will not fulfill its intended purpose and is likely to result in an unsafe or hazardous condition to the customer or end user. Major defects are defects that may cause handling or performance problems but not package failure. Minor defects are defects that are aesthetically objectionable but will not cause package failure. Will alert the Operator to all defects so that the defects can be addressed. Will be responsible for verifying the specifications sheet that packaging parameters are being met. Will safely perform any rework required. The Inspector will safely perform housekeeping duties and will keep work area clean. When a line goes down the inspector will clean entire line area. Will promote a “teamwork” atmosphere by assisting where needed in housekeeping, organizing, packing, transporting corrugated, erecting corrugated, performing rework. Will safely assist the Operator in grinding bottles during startup of the machines, clear jams on the downstream, housekeeping around the entire machine including grinders, downstream, under the takeouts. Will safely assist the Maintenance department through housekeeping on and around machines that are down for planned maintenance. Evaluates and takes appropriate action to maintain a safe work environment with established standards and guidelines. Inspect work areas, and look for unsafe acts/conditions. Effectively use verbal and written communications. Maintain a clean and safe working environment. Perform sweeping, cleaning, sorting duties as necessary. Perform all duties in accordance with safety rules and procedures. EDUCATION:Preferred: High School diploma or GED equivalent SKILLS:Required: Must be able to lift up to 40 pounds continuously throughout the shift. Work involves continuous lifting, bending, reaching and twisting. LIMITATIONS AND DISCLAIMER (Non-Canada) The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an “at-will” basis. Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status. Silgan is a drug-free workplace. LIMITATIONS AND DISCLAIMER - Canada The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to accommodate individuals with disabilities. Silgan endeavors to provide accommodations to individuals with disabilities to perform their essential job duties as long as the accommodation does not pose an undue hardship on the company's operations and does not pose a direct threat of substantial harm to the employee or others. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Employment is always subject to the Silgan's rights as employer, including the right to end employment in accordance with Provincial Law. Silgan is an equal opportunity employer. We consider applicants for all positions without regard to any ground protected under Provincial human rights laws. Silgan is a drug-free workplace.

Come join a growing company in the automotive field! MARTIN Technologies is hiring Quality Inspection Technicians at our facility in Toledo, OH. This is a wonderful career opportunity for anyone looking to be a part of the automotive world. We hire a diverse staff, so even if you have been out of the workforce for some time, you are welcome to apply. We provide all training! We have positions available for entry-level through experienced technicians. Pay and job placement dependent on experience. Openings on Day and Afternoon shifts. Overtime opportunities available. Job Duties: Our Quality Inspection Technicians inspect and sort automotive parts into complying and non-complying categories. Employees use visual and measured inspection of automotive transmission components to make sure the parts meet quality standards. This is a warehouse setting, with candidates having to stand and walk for extended periods of time. Responsibilities: Report each day on time Follow verbal and written instructions Perform product quality inspections to identify defects Ensure products meet customer specifications per work instructions Work with a sense of urgency Use basic measurement and hand tools as required Keep record of daily tasks Qualifications: Analytical, logical thought process and meticulous attention to detail Ability to visually determine if it a part meets identified criteria (color, shape, size, other) Strong work ethic and a positive attitude Must be able to stand for 8 hours and lift 20 lbs. Must have reliable transportation. Full time position with benefits. MARTIN Technologies is a full-service, global engineering and manufacturing company with capabilities in the automotive, marine, aerospace, and defense industries. From our beginnings in Motorsports (1996) we have experienced steady growth in the transportation industry. We excel with innovative methods and best practices supporting the world's best customers. Our global experience in Electrification, Autonomous, and new technologies create an exciting and diverse environment for our team. ********************

Department: Quality Assurance Reports to: Quality Manager Employment Classification: Full time/ Non-exempt Revised: 2025 Set up and perform mechanical inspection of all parts and assemblies; and to verify incoming product(s) meets WSMC purchase order requirements. Must be proficient in the use of precision measuring instruments including but not be limited to; micrometers, veneers, dial calipers, depth micrometers, height gage, gage blocks and various other precision measuring instruments. In addition, this position requires the candidate to be proficient in the use of computers and be familiar with Microsoft Office Software. These tasks are completed by performing the following duties Essential Duties and Responsibilities Reads and interprets product drawings and understands geometric tolerances and dimensioning application(s). Receives purchased material and products and compares them to the purchase order confirming that the requirements of the purchase order have been met including quantities. Responsible for verification and review of inspection documentation and material certifications to assure they meet the product drawing, specification, and purchase order requirements. Required to mark parts by utilizing one or more part marking processes (e.g. manual vibro-peen, controlled dot peen, and/or, other marking methods (as applicable). Perform visual and dimensional inspections of in-process and finished components, sub-assemblies and products and documenting the results of the inspection. Rejects all damaged or nonconforming parts and corresponds with the Materials department on disposition of rejected parts that may be scrap, and/or, require rework. Assists in the disposition of non-conforming material. Assist Quality and Engineering in investigations of process related quality issues. Provides documentation to the Materials Department so that they can receive items into our inventory control system. Request more complete specifications to drawings where needed. Performs administrative duties that are pertinent to the job. Perform review of incoming paperwork for incoming product. Assist with ongoing cost reduction efforts. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations Other responsibilities as assigned.

**Company** HSB , United States As an inspector, you will review and witness activities to recognized international codes, standards and/or regulations such as ASME Code (***************************************************************************************************** , Pressure Equipment Directive (************************************************************************************************************* (PED) and Canadian Standards to name a few. You will also provide inspections to, client specifications and perform Engineering services to companies throughout the designated area. The position has minimum qualifications of a high school diploma and work experience with **boilers** and **pressure vessels** or nuclear reactors. Training is provided annually for all of our inspectors, which is developed and supported by our technical industry experts. **About HSB - Global Inspection and Engineering Services** Global Inspection and Engineering Services is an inspection focused engineering division of HSBIIC with over 450 engineers, inspectors and auditors located in over 27 countries. The world's largest ASME Authorized Inspection Agency, GIES Inspectors are instrumental in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our Global Inspection and Engineering Services personnel is focused on the beginning of the life cycle of the type of equipment insured by HSB and is an important part of HSB's comprehensive understanding of the insured equipment. Services include: + Review and acceptance of Job Packages + In-process Inspections + Monitoring of Quality Control System + Witnessing final Hydrostatic Test + Review and signing of required forms HSB has a long and respected reputation as the leader in our industry with a primary focus on workplace safety. Required: H.S. diploma. Experience on High Pressure Boilers Experience operating, maintaining, or inspecting boilers and pressure vessels Basic computer skills ASME & NBIC Code Knowledge Meet RCI-1 Requirements to qualify for AI/RI examinations and Commission qualifications. Minimum of 3 years experience with an ASME background or Navy proto type and A school background. Preferred: Technical College Graduate Engineering degree Experience with boilers and pressure vessels.Risk Survey experience N.B. of Boiler and Pressure Vessel Inspectors Commission State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors Commission, with "A" Endorsement. PHYSICAL REQUIREMENTS + The person in this position needs to routinely move about (including ascending/descending) a site facility, remote location, etc. while performing visual inspections of ASME/NB boilers and pressure vessels, review NDE reports and calculations. + Consistently works in outside weather conditions that may be in frigid or hot temperatures. + May need to lift own body weight with associated safety equipment. + Must be able to remain in a stationary position 50% of the time. **Other Requirements** Some of HSB's customers require our personnel to have a security clearance in order to enter their facilities. As such, candidates for this position must be eligible to obtain a security clearance. Because this position may require routine travel among multiple customer locations, the successful candidate may be assigned a company vehicle or may have the option to use their personal vehicle for company business. As such, the successful candidate must have an acceptable driving record. At The Hartford Steam Boiler, a subsidiary of Munich Re, we see Diversity and Inclusion as a solution to the challenges and opportunities all around us. Our goal is to foster an inclusive culture and build a workforce that reflects the customers we serve and the communities in which we live and work. We strive to provide a workplace where all of our colleagues feel respected, valued and empowered to achieve their very best every day. We recruit and develop talent with a focus on providing our customers the most innovative products and services. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. We are an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. The work environment characteristics, and any physical and mental requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Visión de conjunto Find your future at National Beef! Are you interested in making up to $21.15 per hour to start at an entry level job with the possibility of making $23.10 per hour after training? National Beef of North Baltimore, Ohio, is seeking to hire a product inspector. With competitive pay and benefits, safe and stable work, and an environment that is caring and supportive, National Beef could become your next career move! Competitive Wages and Benefits: Hourly wages start at $18.65 per hour $2.50 per hour weekly perfect attendance bonus Family-friendly benefits include health, dental and vision, with low, out of pocket, insurance premiums Paid life and short term disability insurances Please contact National Beef Ohio at ************ for assistance. For more information, Click Here! Responsabilidades Product Inspector responsibilities and duties include but are not limited to: Product Inspector ensure food products meet quality and safety standards throughout their life-cycle. This includes inspecting raw materials, monitoring production processes, and documenting findings to ensure compliance with regulations and company policies. Inspecting raw materials and finished products: This involves visual and tactile inspections, as well as testing using equipment to assess quality attributes like color, texture, size, and consistency. Monitoring production processes: This includes observing production lines, and ensuring adherence to Good Manufacturing Practices (GMP) and Hazard Analysis and Critical Control Points (HACCP) principles. Reporting and communicating: Communicating quality issues to relevant teams, including other production personnel, supervisors, and management. This is a safety sensitive position. This position is on-site. Cualificaciones Qualified candidates for the Product Inspector position should possess the following: Attention to detail Excellent written and verbal communication skills Ability to work in a temperature-controlled environment of 45 to 50 degrees Fahrenheit Ability to lift up to 50 Lbs Ability to work standing for an entire shift Excellent attendance a must Must be at least 18 years of age or older. Applicants must be authorized to work for ANY employer in the U.S. We are unable to provide visa sponsorship at this time. Company Overview (SP) National Beef is a leader in producing fresh, chilled and further processed beef products for customers in the U.S. and worldwide. We offer a variety of employment opportunities in our production, packaging, and hide tanning facilities that stretch from the western plains to the east coast. We strive to be the preferred employer in every one of those communities, whether it's measured by the number of people employed or the good we do in the area. We invite you to join our family, wherever you call home. National Beef is an equal opportunity employer committed to workplace diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, natural origin, age, gender identity, protected veterans status, or status as a disabled individual.

Job Title: Utility Inspector IILocation: Lebanon, OHDuration: 03/01/2025-01/17/2026Job Description:The Utility Inspector II is responsible for the completion of all activities in their area ofassignment in accordance with the appropriate Company specifications and the approved for construction drawings. Job duties may include but are not limited to:Being familiar with the approved construction drawings and the appropriate Company specifications and assuring the work is performed in accordance with those requirements. Understanding the Contract document as it relates to his or her duties on the project. Maintaining a detailed inspector's log book. Completing and submitting applicable inspection reports that accurately describe the work performed on the project. Taking proactive approach to safety on the job site and reporting safety issues to the Construction Manager, Chief Inspector and Safety Inspector. Planning and organizing inspection duties in advance. Assuring that any design changes or material substitutions are discussed with the Construction Manager, Chief Inspector and that proper Company approval is obtained. Keeping the Chief Inspector aware of any daily problems or anticipated problems with the job Requirements:OSHA 10 or 30Station Experience5 years of experience in the industry We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting. Documents include electronic, hard or soft copies. This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor. The Field Resource Inspector will work independently or with other resources depending on the task being performed. The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus. The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services. Safety is our number one priority and will be embedded into every discussion, meeting and project. ESSENTIAL DUTIES AND RESPONSIBILITIES: Field Resource Inspection Technician is responsible for performing the inspection services. They are to be on time and complete work scheduled. The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication. All required job information should be completed promptly via the required tools and resources. Must be familiar with all forms of low slope roofing systems. Must be knowledgeable with Tremco line of products and proper applications Daily responsibilities include, but are not limited to: Review and confirm all work orders scheduled. Completion of all safety related activities using the designated tools mandated by Tremco Take photos to document phases of work performed on the job Job Site Inspection specific: Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific Check materials for specification compliance, material type and proper storage Walk the roof with the Foreman. Address proper drainage, staging, application and details Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

Build an Aviation Career You're Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term. What you'll do: Determines and documents the modification status/configuration of products being processed for repair or overhaul to verify compliance to the applicable regulatory and customer requirements. Ensures the products to be inspected are sufficiently clean and in acceptable condition to perform the inspections necessary to complete the work instruction. Determines the repairability of those products not meeting the applicable requirements. Records the inspection results on the appropriate inspection documentation. Generates an estimate on the cost of replacement parts and labor necessary to complete the applicable work instructions. Generates the applicable documentation for the repair of unserviceable products. Inspects and identifies parts in the Reduced to Spares (RTS) process. Supervises detail inspection trainees in the on-the-job training (OJT) process. Participates in continuous improvement of cell processes. Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements. Moves between production assignments that utilize multiple skills as needed to support production requirements. Participates in the cross training of other technicians as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. Carries out other duties as assigned. Basic Qualifications Knowledgeable and proficient in the proper use of precision measuring equipment. Ability to read, understand and interpret blueprints. Ability to use and interpret publications used in the production process (graphs, charts, schematics, blueprints). Proficient in technical writing. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit for prolonged periods. Desired Skills Working knowledge of production management computer system and other related internal control systems. Previous inspection experience preferred. Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities

is $20/hour. A company vehicle will be provided following the completion of the Operator Qualifications. Do you want to start your career with a company that values integrity, dedication, and hard work every single day? We want to offer you competitive pay, a generous benefits package, and opportunities for advancement. As leaders in the utility industry concentrating, on quality and safety, RECONN is looking for people to join our team who are problem solvers, take pride in public safety, and are comfortable in a fast-paced, exciting work environment. Utility Inspection Technician: Responsible for checking gas meters for leaks and corrosion. This includes visual inspection and ensuring all required paperwork/data are completed. Meter Inspection Technicians will be required to report to their respective work area on time at the start of each shift. While on-site, the technician will be responsible for identifying any abnormal operating conditions along with accurately filling out all forms associated with the inspection visit (the form may be electronic or paper). We are currently hiring throughout the Toledo, OH area. These are daytime, full-time positions and overtime may be required. Instructor-led training will be provided. This position may require you to work weekends. Why You'll Love Working for Us (Our Benefits): 100% paid training - We're invested in you, starting on your first day. Company laptop, phone, and equipment - Advanced technology you can count on. Daily pay - Access your pay when you need it most. Instantly transfer your earnings to your bank the same day. Comprehensive insurance options - A variety of excellent insurance choices including medical, dental, vision, and life. 401(k) with company match - We will help you save for the long term with our competitive 401(k) employer match program. PTO and paid holidays - Even in your first year, so you can spend time with your loved ones. Tenure Boots Program - Provides a $200 voucher to buy a new pair of work boots on your first anniversary and every year after. Tech Health Desk - Dedicated representatives to get you what you need when you need it. Employee discounts & perks - Outstanding discounts at major retailers and service What We Need from You (Our Requirements): Proficient at using current technology; smartphone, tablet Must be able to communicate in an effective manner in a one-on-one setting and while addressing a group Ability to work long hours and weekends Must be able to work outdoors in all types of weather conditions; outdoor experience preferred Must be available to work overtime and weekends (as needed) Must pass a drug screen Valid driver's license and safe driving record required Work well within a group, as well as individually Ability to use simple hand tools Ability to read utility maps We are an Equal Opportunity Employer.

Job Description: is $20/hour. A company vehicle will be provided following the completion of the Operator Qualifications. Do you want to start your career with a company that values integrity, dedication, and hard work every single day? We want to offer you competitive pay, a generous benefits package, and opportunities for advancement. As leaders in the utility industry concentrating, on quality and safety, RECONN is looking for people to join our team who are problem solvers, take pride in public safety, and are comfortable in a fast-paced, exciting work environment. Utility Inspection Technician: Responsible for checking gas meters for leaks and corrosion. This includes visual inspection and ensuring all required paperwork/data are completed. Meter Inspection Technicians will be required to report to their respective work area on time at the start of each shift. While on-site, the technician will be responsible for identifying any abnormal operating conditions along with accurately filling out all forms associated with the inspection visit (the form may be electronic or paper). We are currently hiring throughout the Toledo, OH area. These are daytime, full-time positions and overtime may be required. Instructor-led training will be provided. This position may require you to work weekends. Why You'll Love Working for Us (Our Benefits): 100% paid training - We're invested in you, starting on your first day. Company laptop, phone, and equipment - Advanced technology you can count on. Daily pay - Access your pay when you need it most. Instantly transfer your earnings to your bank the same day. Comprehensive insurance options - A variety of excellent insurance choices including medical, dental, vision, and life. 401(k) with company match - We will help you save for the long term with our competitive 401(k) employer match program. PTO and paid holidays - Even in your first year, so you can spend time with your loved ones. Tenure Boots Program - Provides a $200 voucher to buy a new pair of work boots on your first anniversary and every year after. Tech Health Desk - Dedicated representatives to get you what you need when you need it. Employee discounts & perks - Outstanding discounts at major retailers and service What We Need from You (Our Requirements): Proficient at using current technology; smartphone, tablet Must be able to communicate in an effective manner in a one-on-one setting and while addressing a group Ability to work long hours and weekends Must be able to work outdoors in all types of weather conditions; outdoor experience preferred Must be available to work overtime and weekends (as needed) Must pass a drug screen Valid driver's license and safe driving record required Work well within a group, as well as individually Ability to use simple hand tools Ability to read utility maps We are an Equal Opportunity Employer.