Engineering Technician jobs at Colonial Pipeline - 560 jobs

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements. Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software Install, diagnose, and maintain PLC's or DCS systems & process or safety controls Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID's Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current Participate in call out/on call requirements Actively participate in partnership safety programs and initiatives Perform specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems) Provide work direction, oversight, and inspect other work provided by third party contractors Provide mentoring and oversight to less qualified employees Provide accurate written and electronic reporting Comply with partnership safety policies and procedures Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: Valid driver's license with demonstrated safe driving record Ability to maintain motor controls, relay logic, RTU's, I&E associated end-devices Proficiency with MS Office Suite including Outlook and Word Experience using software to troubleshoot, design, or configure control solutions specific to In Touch Wonderware or Factory Talk, Allen Bradley RSLogix, or Delta V Extensive knowledge of DOT 192 DOT 193, and DOT 195, as it pertains to required testing and documentation for plants, compressor stations, pipelines, and/or facilities as required Demonstrated understanding of the National Electric Code and OSHA 1910 as it relates to electrical systems Preferred Qualifications: State Electrical License Associates Degree in Instrumentation Related software and system certifications (i.e. Factory Talk, Delta V, etc.) Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Frequent exposure to heat, cold, and other adverse weather conditions Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance Working conditions may include confined spaces Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment Reliable attendance at work Occasional overnight travel may be required

TE Connectivity's Technical Engineering Support Teams analyze, test and assist in research for the development of products and processes. Team members may specialize in quality control or assurance, chemical manufacturing processes, metals, electrical connectors and components, process development, materials, and/or instrumentation. They may also handle calibration, displays, network control, mold development and audiovisual work or environmental health and safety. The Technical Engineering Support Teams are responsible for the completion of assigned engineering projects within budgetary and scheduling guidelines. They plan, prioritize, and manage multiple engineering projects; prioritize tasks and assign team members to ensure that the team's overall resources are used effectively and that project deadlines are met. They evaluate and authorize changes that significantly impact the scope, budget, or timeline of a project. At times, they may work directly with customers to understand needs, gather customer requirements, identify resources and assess project risks. They create, develop, plan, write and edit operational, instructional, maintenance or test procedures for paper, multimedia or web-based publication, for non-technical and technical users. This position requires access to information that is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be a U.S. citizen or national, U.S. lawful permanent residents, persons granted asylee status in the U.S., or persons admitted into the U.S. as a refugee. Job Requirements Support goals for yield and productivity sustainment through process improvement and troubleshooting. Training operators on manufacturing process and equipment operation/set-up. Coordinate and execute moderately complex engineering studies and projects as assigned with minimal guidance. Compliance to our QA manual and documentation systems. Work with outside vendors to solve problems for the plant. Edit and create procedures and standard work. Assists in training of manufacturing technicians Other duties as assigned. What your background should look like HS Diploma/GED and 4+ years related experience OR 2 year degree and 2+ years related experience. Ability to safely operate common hand and power tools. Experience in 5S methodology and regulated industry experience. Ability to independently navigate in and operate PCs and other industrial computer equipment. Ability to redline and compose new MS Word documents using company standard templates, create basic Powerpoint slides. Ability to read, write and speak proficiently in English. ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive and connected future. Our broad range of connectivity and sensor solutions, proven in the harshest environments, enable advancements in transportation, industrial applications, medical technology, energy, data communications and the home. With more than 85,000 employees, including more than 7,500 engineers, working alongside customers in approximately 140 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at ********** and on LinkedIn, Facebook, WeChat and Twitter. COMPENSATION Competitive base salary commensurate with experience: $22.70 - $34,04/hour ($47,200 - $70,800/year) (subject to change dependent on physical location) Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity. Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork

Job Title: Production Technician III - CRO, Sr. Work Place Flexibility: Onsite Legal Entity: Entergy Texas, Inc.-GTX CAN BE FILLED BY PRODUCTION TECHNICIAN III, II, I, CRO or CRO-SR.* JOB SUMMARY/DESCRIPTION: Operate and maintain systems associated with a Combined Cycle Gas Turbine (CCGT) facility while demonstrating safety awareness and direction that will continuously improve performance by employees and contractors through the use and strict adherence to procedures and processes. JOB DUTIES/RESPONSIBILITIES: * Maintain regulatory compliance and be proactive in dealing with all agencies and avoid reportable violations * Required participation in the multi-year Production Technician multi skill progression plan to develop key skills in maintenance and operations. Upon completion the employee should have the desire, aptitude and ability to meet board operator qualification * Conduct and participate in job briefings and safety meetings. Be responsible for Contractor Safety and conduct Contractor Safety Orientations as needed * Applies understanding and knowledge of plant systems, burner controls (where applicable), turbine controls, data acquisition, process controls, regulating devices, personal computers, troubleshooting, etc. * Operational duties include, but not limited to, operating the control board, making operational rounds, performing PM/PDM activities, HRSG water chemistry, CEMS monitoring and calibrations * Applies skills to perform inspections, calibrations, installations, repairs, diagnostics, testing and troubleshooting of complex instrumentation equipment and regulating devices in a CCGT facility, alone and as part of a team. Perform mechanical work involved in inspection, repair and installation of instrumentation and electrical equipment, and light PM of mechanical systems MINIMUM REQUIREMENTS: Minimum education: * 2 Year Associate's Degree in Industrial Electronics, Instrumentation/Controls or Production/Process Technology or equivalent work experience Minimum experience: * PTECH III: 0-2 years' experience in a CCGT facility in an Operations or Maintenance position; or 4 years of power plant operations/maintenance/electrical experience * PTECH II - CRO, SR: 2-5 years' experience in a CCGT facility in an Operations or Maintenance position; or 5 years of power plant operations/maintenance/electrical experience * Either the minimum education or minimum experience requirements must be met by the applicant for job consideration* Minimum skills: * Must be good at communicating, both verbal and written, the results of evaluation of assignments to supervision * Ability to interpret and comprehend P&ID's, electrical schematics, network diagrams and OEM manuals Minimum Certifications/Licensing/Testing: * Successful completion of the EEI POSS/MASS Test Desired experience: * CCGT Power Plant experience * Control Room Operator experience Primary Location: Texas-Willis Texas : Willis Job Function: Power Plant Operations FLSA Status: Nonexempt Relocation Option: No Relocation Offered Union description/code: NON BARGAINING UNIT Number of Openings: 1 Req ID: 121668 Travel Percentage:Up to 25% An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please click here to view the EEO page, or see statements below. EEO Statement: The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated. Accessibility: Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click here and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request. Additional Responsibilities: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. Know Your Rights: Workplace Discrimination is Illegal The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours. EEI Testing: One way that Entergy has found to identify and assess the abilities and skills needed for certain jobs is through pre-employment testing. If this position does require an EEI test, the type of test will be located under the qualifications section of the job posting. If you are invited to a test session, we strongly recommend you review and complete the practice test as well as review the testing brochure for your respective test. The test brochure will give you critical information on the test such as time allocated and number of questions. Also, keep in mind that the actual test is timed; you should practice timing yourself while doing the practice tests. The practice test information and test brochures can be located by going to the EEI website, ********************************* Logon ID: entergy, password: practice test (2 words). Travel expenses incurred in connection with EEI testing are non-reimbursable. In addition to EEI testing there is also Fit-for-Duty testing which will identify and assess the abilities and skills needed for certain jobs. If this position does require Fit-for-Duty testing, the type of test will be located under the qualifications section of the job posting. WORKING CONDITIONS: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. Please note: Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. This position is designated as a Safety Sensitive position and is subject to mandatory pre-employment and random drug testing.

**Job Title:** Production Technician III - CRO, Sr. **Work Place Flexibility:** Onsite **Legal Entity:** Entergy Texas, Inc.-GTX CAN BE FILLED BY PRODUCTION TECHNICIAN III, II, I, CRO or CRO-SR.***** **JOB SUMMARY/DESCRIPTION:** Operate and maintain systems associated with a Combined Cycle Gas Turbine (CCGT) facility while demonstrating safety awareness and direction that will continuously improve performance by employees and contractors through the use and strict adherence to procedures and processes. **JOB DUTIES/RESPONSIBILITIES:** + Maintain regulatory compliance and be proactive in dealing with all agencies and avoid reportable violations + Required participation in the multi-year Production Technician multi skill progression plan to develop key skills in maintenance and operations. Upon completion the employee should have the desire, aptitude and ability to meet board operator qualification + Conduct and participate in job briefings and safety meetings. Be responsible for Contractor Safety and conduct Contractor Safety Orientations as needed + Applies understanding and knowledge of plant systems, burner controls (where applicable), turbine controls, data acquisition, process controls, regulating devices, personal computers, troubleshooting, etc. + Operational duties include, but not limited to, operating the control board, making operational rounds, performing PM/PDM activities, HRSG water chemistry, CEMS monitoring and calibrations + Applies skills to perform inspections, calibrations, installations, repairs, diagnostics, testing and troubleshooting of complex instrumentation equipment and regulating devices in a CCGT facility, alone and as part of a team. Perform mechanical work involved in inspection, repair and installation of instrumentation and electrical equipment, and light PM of mechanical systems **MINIMUM REQUIREMENTS:** **Minimum education:** + 2 Year Associate's Degree in Industrial Electronics, Instrumentation/Controls or Production/Process Technology or equivalent work experience **Minimum experience:** + PTECH III: 0-2 years' experience in a CCGT facility in an Operations or Maintenance position; or 4 years of power plant operations/maintenance/electrical experience + PTECH II - CRO, SR: 2-5 years' experience in a CCGT facility in an Operations or Maintenance position; or 5 years of power plant operations/maintenance/electrical experience *****Either the minimum education or minimum experience requirements must be met by the applicant for job consideration***** **Minimum skills:** + Must be good at communicating, both verbal and written, the results of evaluation of assignments to supervision + Ability to interpret and comprehend P&ID's, electrical schematics, network diagrams and OEM manuals **Minimum Certifications/Licensing/Testing:** + Successful completion of the EEI POSS/MASS Test **Desired experience:** + CCGT Power Plant experience + Control Room Operator experience **Primary Location:** Texas-Willis Texas : Willis **Job Function** : Power Plant Operations **FLSA Status** :Nonexempt **Relocation Option:** No Relocation Offered **Union description/code** : NON BARGAINING UNIT **Number of Openings** : 1 **Req ID:** 121668 **Travel Percentage** :Up to 25% An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please clickhere (**************************************************** to view the EEO page, or see statements below. **EEO Statement:** The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated. **Accessibility:** Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click **here (humanr@entergy.com?subject=Accessibility)** and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request. **Additional Responsibilities:** As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. **Know Your Rights: Workplace Discrimination is Illegal (************************************************************************************************* The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours. **EEI Testing:** One way that Entergy has found to identify and assess the abilities and skills needed for certain jobs is through pre-employment testing. If this position does require an EEI test, the type of test will be located under the qualifications section of the job posting. If you are invited to a test session, we strongly recommend you review and complete the practice test as well as review the testing brochure for your respective test. The test brochure will give you critical information on the test such as time allocated and number of questions. Also, keep in mind that the actual test is timed; you should practice timing yourself while doing the practice tests. The practice test information and test brochures can be located by going to the EEI website, ******************************** , Logon ID: entergy, password: practice test (2 words). Travel expenses incurred in connection with EEI testing are non-reimbursable. In addition to EEI testing there is also Fit-for-Duty testing which will identify and assess the abilities and skills needed for certain jobs. If this position does require Fit-for-Duty testing, the type of test will be located under the qualifications section of the job posting. **WORKING CONDITIONS:** As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. **Please note:** Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. This position is designated as a Safety Sensitive position and is subject to mandatory pre-employment and random drug testing. **Job Segment:** Power Plant Operator, Power Plant, Compliance, Facilities, Gas Technician, Energy, Legal, Operations

TEAM UP WITH US! The Engine Field Service Trainee is responsible for assisting the Senior Field Service Technician for performing certain repairs and maintenance. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Assist a Senior Field Technician in completing assigned jobs and task to meet flat rate times and re-do metric. * Assist a Senior Field Technician in completing related paperwork and access databases required to complete job (work order, parts orders, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations * Remove and install parts, disassemble and assemble components, and test and adjust assemblies with supervision from a Senior Field Technician * Assist a Senior Field Technician in providing accurate quotes and pricing estimates to the customer. * With guidance from a Senior Field Service Technician the trainee will be required and expected to familiarize him or herself with the following: Correct service report writing, DOT reports, and time entry and expense charges. * Trainee will be required to ride along and assist a Senior Field Service Technician with all aspects of the task at hand daily. * Trainee will be under direct mentorship of a Senior Field Service Technician that he or she is assigned to. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or • 1+ years of related experience and/or training; or equivalent combination of education and experience. * Associate's degree/certificate in diesel technology, or similar mechanical discipline, preferred. * Clean driving record and CDL for field assignment, must be at least 21 at time of applying in order to be assigned and operate field vehicle. * General knowledge of diesel or gas engines, electrical, electronic, hydraulic, mechanical, pneumatic systems and components. * General knowledge of basic hand tools, air tools, precision measuring tools and instruments, lap tops, diagnostic software and cranes and rigging equipment. * May require MSHA certification Education and/or Experience. * Successfully complete Work Steps assessment. * Flexibility to work various schedules including shift work - Be expected to work same schedule or shift as Senior Field Service Technician assigned to - Will be required at times to work away from home and stay out of town overnight. - At times overtime may be required to meet work and deadline requirements. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: Applicant must pass administered Can Test and Bennett Mechanical Comprehension Test Prior to acceptance for this position. Once applicant is accepted for this position the following will be required monthly. A monthly written evaluation will be administered by the Engine Field Service Supervisor or Field Service Dispatcher on the Trainees performance that month. Once the written evaluation is complete the Trainee and Field Service Supervisor will sit down and go over that month's evaluation. Once this phase is complete a determination will be made by the Supervisor based on evaluation results to continue the program or place the trainee on a 30-day probation period. In the advent at the end of the 30-day probation period there is no improvement the trainee can be terminated or reassigned at the discretion of the Engine Field Service Supervisor and Regional Manager. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic

Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Wednesday, January 14, 2026 More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. This position may be filled as an Engineering Technologist I or one level higher as an Engineering Technologist II dependent upon the selected candidate's experience. The Engineering Technologist I position is the first level of the non-Engineer degreed technical support. An Engineering Technologist I applies developing technical expertise to solve simple problems and management skills to provide oversight of work in a specific area of developing expertise, with close supervision. An Engineering Technologist I is expected to develop skills and ability in their field of study and work with some degree of independence. The Engineering Technologist II position is second level of the non-Engineer degreed technical support role job classification. The Engineering Technologist II applies technical expertise to solve more complex problems and management skills to provide oversight and direction of work in a specific area of expertise, with general supervision. Employees in the Engineering Technologist II position are expected to develop deeper technical skills and the ability to work with an increasing degree of independence. Responsibilities Responsibilities and duties include, but are not limited to: * Applies technical expertise in the identification, analysis and resolution of problems in area of expertise, * Ensures accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling, and monitoring of work activities, * Applies beginner level knowledge in preparing thorough and accurate technical reports, correspondence, documentation, calculations and sketches, * Conducts engineering and related studies, * Strives to continually improve job-related, technical and professional knowledge, skills and performance, * Develops positive working relationships to effectively coordinate work activities, * Demonstrates effective verbal and written communication skills, * Maintains accurate records and files, * Supports the company's goals and represents the company positively and professionally Basic/Required Qualifications - Engineering Technologist I * Associate Degree in Engineering or Engineering Technology, or 2+ years equivalent industry experience without a degree. Basic/Required Qualifications - Engineering Technologist II * Either a graduate from a college or university with Bachelor of Science in Engineering or Engineering Technology, or 2+ years of experience and Associate Degree in Engineering or Engineering Technology, or 4+ years equivalent experience without a degree. Desired Qualifications * Demonstrated ability to work with a variety of individuals from various socio-economic, cultural and ethnic backgrounds * Understanding of basic principles of project management * Effective verbal and written communication skills * Experience in the utility industry Additional Preferred Qualifications * Experience in the utility industry. * Understanding of basic principles of project management. Working Conditions * Hybrid Mobility Classification * Some business units may require visits to field sites and/or plants Travel Requirements 5-15% Relocation Assistance Provided (as applicable) No Represented/Union Position No Visa Sponsored Position No Please note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility

Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Wednesday, January 14, 2026More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. This position may be filled as an Engineering Technologist I or one level higher as an Engineering Technologist II dependent upon the selected candidate's experience. The Engineering Technologist I position is the first level of the non-Engineer degreed technical support. An Engineering Technologist I applies developing technical expertise to solve simple problems and management skills to provide oversight of work in a specific area of developing expertise, with close supervision. An Engineering Technologist I is expected to develop skills and ability in their field of study and work with some degree of independence. The Engineering Technologist II position is second level of the non-Engineer degreed technical support role job classification. The Engineering Technologist II applies technical expertise to solve more complex problems and management skills to provide oversight and direction of work in a specific area of expertise, with general supervision. Employees in the Engineering Technologist II position are expected to develop deeper technical skills and the ability to work with an increasing degree of independence. Responsibilities Responsibilities and duties include, but are not limited to: Applies technical expertise in the identification, analysis and resolution of problems in area of expertise, Ensures accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling, and monitoring of work activities, Applies beginner level knowledge in preparing thorough and accurate technical reports, correspondence, documentation, calculations and sketches, Conducts engineering and related studies, Strives to continually improve job-related, technical and professional knowledge, skills and performance, Develops positive working relationships to effectively coordinate work activities, Demonstrates effective verbal and written communication skills, Maintains accurate records and files, Supports the company's goals and represents the company positively and professionally Basic/Required Qualifications - Engineering Technologist I Associate Degree in Engineering or Engineering Technology, or 2+ years equivalent industry experience without a degree. Basic/Required Qualifications - Engineering Technologist II Either a graduate from a college or university with Bachelor of Science in Engineering or Engineering Technology, or 2+ years of experience and Associate Degree in Engineering or Engineering Technology, or 4+ years equivalent experience without a degree. Desired Qualifications Demonstrated ability to work with a variety of individuals from various socio-economic, cultural and ethnic backgrounds Understanding of basic principles of project management Effective verbal and written communication skills Experience in the utility industry Additional Preferred Qualifications Experience in the utility industry. Understanding of basic principles of project management. Working Conditions Hybrid Mobility Classification Some business units may require visits to field sites and/or plants Travel Requirements 5-15%Relocation Assistance Provided (as applicable) NoRepresented/Union PositionNoVisa Sponsored PositionNoPlease note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility

Job Title: Production Technician III - CRO, Sr. Work Place Flexibility: Onsite Legal Entity: Entergy Texas, Inc.-GTX CAN BE FILLED BY PRODUCTION TECHNICIAN III, II, I, CRO or CRO-SR.*** JOB SUMMARY/DESCRIPTION: Operate and maintain systems associated with a Combined Cycle Gas Turbine (CCGT) facility while demonstrating safety awareness and direction that will continuously improve performance by employees and contractors through the use and strict adherence to procedures and processes. JOB DUTIES/RESPONSIBILITIES: Maintain regulatory compliance and be proactive in dealing with all agencies and avoid reportable violations Required participation in the multi-year Production Technician multi skill progression plan to develop key skills in maintenance and operations. Upon completion the employee should have the desire, aptitude and ability to meet board operator qualification Conduct and participate in job briefings and safety meetings. Be responsible for Contractor Safety and conduct Contractor Safety Orientations as needed Applies understanding and knowledge of plant systems, burner controls (where applicable), turbine controls, data acquisition, process controls, regulating devices, personal computers, troubleshooting, etc. Operational duties include, but not limited to, operating the control board, making operational rounds, performing PM/PDM activities, HRSG water chemistry, CEMS monitoring and calibrations Applies skills to perform inspections, calibrations, installations, repairs, diagnostics, testing and troubleshooting of complex instrumentation equipment and regulating devices in a CCGT facility, alone and as part of a team. Perform mechanical work involved in inspection, repair and installation of instrumentation and electrical equipment, and light PM of mechanical systems MINIMUM REQUIREMENTS: Minimum education: 2 Year Associate's Degree in Industrial Electronics, Instrumentation/Controls or Production/Process Technology or equivalent work experience Minimum experience: PTECH III: 0-2 years' experience in a CCGT facility in an Operations or Maintenance position; or 4 years of power plant operations/maintenance/electrical experience PTECH II - CRO, SR: 2-5 years' experience in a CCGT facility in an Operations or Maintenance position; or 5 years of power plant operations/maintenance/electrical experience ***Either the minimum education or minimum experience requirements must be met by the applicant for job consideration*** Minimum skills: Must be good at communicating, both verbal and written, the results of evaluation of assignments to supervision Ability to interpret and comprehend P&ID's, electrical schematics, network diagrams and OEM manuals Minimum Certifications/Licensing/Testing: Successful completion of the EEI POSS/MASS Test Desired experience: CCGT Power Plant experience Control Room Operator experience Primary Location: Texas-Willis Texas : Willis Job Function: Power Plant Operations FLSA Status: Nonexempt Relocation Option: No Relocation Offered Union description/code: NON BARGAINING UNIT Number of Openings: 1 Req ID: 121668 Travel Percentage:Up to 25% An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please click here to view the EEO page, or see statements below. EEO Statement: The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated. Accessibility: Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click here and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request. Additional Responsibilities: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. Know Your Rights: Workplace Discrimination is Illegal The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours. EEI Testing: One way that Entergy has found to identify and assess the abilities and skills needed for certain jobs is through pre-employment testing. If this position does require an EEI test, the type of test will be located under the qualifications section of the job posting. If you are invited to a test session, we strongly recommend you review and complete the practice test as well as review the testing brochure for your respective test. The test brochure will give you critical information on the test such as time allocated and number of questions. Also, keep in mind that the actual test is timed; you should practice timing yourself while doing the practice tests. The practice test information and test brochures can be located by going to the EEI website, ********************************* Logon ID: entergy, password: practice test (2 words). Travel expenses incurred in connection with EEI testing are non-reimbursable. In addition to EEI testing there is also Fit-for-Duty testing which will identify and assess the abilities and skills needed for certain jobs. If this position does require Fit-for-Duty testing, the type of test will be located under the qualifications section of the job posting. WORKING CONDITIONS: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. Please note: Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. This position is designated as a Safety Sensitive position and is subject to mandatory pre-employment and random drug testing.

Immediate need at Oconee Nuclear Station. Must have been badged at a nuclear plant less than 30 days ago, preferably a Duke plant. A Nuclear Instrumentation and Controls Technician is a highly skilled professional responsible for the safe installation, calibration, troubleshooting, and repair of complex instrumentation and control systems within a nuclear facility. This role requires a deep understanding of various types of instrumentation and control systems, ensuring the precise and reliable operation of critical equipment. Must be able to obtain nuclear unescorted access, including meeting fitness for duty requirements. Essential Functions: * Demonstrate knowledge and capabilities in the theory, installation, calibration, troubleshooting, and repair of general instrumentation and controls, including: * Pressure, flow, and temperature instrumentation, including gauges, transmitters, and switches. * Ultrasonic and radar flow and level transmitters and sensors. * Soldering. * Wire terminations, including splicing, lugging, and Raychem, in accordance with design standards. * Instrumentation tube installation, including bending, cutting, and Swagelok fittings. * Current, voltage, and watt meters. * Digital recorders and devices. * Programmable logic controllers. * Digital systems. Proficiency in the use and understanding of: Electrical elementary drawings. Wiring diagrams. Process and instrumentation diagrams. Flow diagrams. General layout drawings. Experience in functional testing to verify safe and proper operation of systems and equipment prior to and after initial equipment/system operation, including: Control circuits. Permissive. Trips. Maintain a clean work area and ensure good housekeeping. Perform other related duties as assigned. Required Education and Experience: * High School diploma or equivalent. * 3+ years of experience. * Prior nuclear power plant experience, highly desired. * Must be able to obtain nuclear unescorted access, including fitness for duty requirements. * Successful completion of all training including, Radiation Worker Training, Plant Access Training, Fitness for Duty, etc. * Ability to understand and carry out written and oral instructions. * Ability to assemble and disassemble objects and operate small equipment and power tools. * Availability for shift work, if needed. * Ability to support other crafts as requested. * Ability to work at varying heights, in cramped quarters, extreme heat and/or cold, and loud environments (above 89 decibels). * Knowledge of relevant processes and procedures. * Ability to obtain and maintain knowledge of technical manuals and procedures. * Ability to pass specific training and qualifications. * Willingness to work overtime, including shift work, weekends, and holidays as needed. * Ability to pass all background and screening requirements, including drug and/or alcohol screening. Physical Demands: * Visual acuity, balancing, stooping, reaching, walking, manual dexterity, grasping, feeling, hearing, talking. * Capacity to think, concentrate, and focus for long periods. * Ability to read and write complex documents in English. * Capacity to reason and make sound decisions. * Ability to express thoughts orally. * Strategic thinking and planning for growth. * Ability to walk job sites and climb. * Ability to lift a minimum of 50 lbs.

Key Responsibilities * Lead technical discovery with customers to define requirements, constraints, and success criteria. * Design and propose engineered solutions that meet API/DNV/ISO and client specifications. * Prepare detailed technical proposals, drawings, and commercial quotations. * Deliver high-impact product demonstrations and presentations for mixed audiences. * Partner with Sales, Product, and Engineering teams to ensure accurate scope, pricing, and deal execution. * Support post-sale implementation, training, and customer satisfaction. * Analyze and visualize data in Power BI to drive performance insights and strategic planning. * Develop and maintain AI-assisted knowledge tools and internal training materials. * Ensure compliance with all QHSE policies and model professional, ethical behavior. Qualifications * Education: Bachelor's degree in Mechanical, Aerospace, Civil Engineering, or related field. * Experience: 5+ years in product development and 3+ years in customer-facing technical sales or sales engineering. * Preferred: Knowledge of welding and threading processes; familiarity with oil & gas standards (API, DNV, ISO). * Technical Skills: * Proficient with Power BI (data modeling, dashboarding, DAX basics). * Experience with AI/automation tools (e.g., ChatGPT modules). * Strong technical writing and presentation skills. Core Competencies * Exceptional communication and problem-solving skills. * Ability to simplify complex technical topics for diverse audiences. * Strong project management and organizational capability. * Customer-focused, ethical, and collaborative mindset. * Adaptable in a fast-paced, evolving environment. Additional Information * Travel: Occasional travel required for customer meetings, field visits, and industry events. * Compliance: Commitment to all QHSE standards and corporate policies.

Key Responsibilities Lead technical discovery with customers to define requirements, constraints, and success criteria. Design and propose engineered solutions that meet API/DNV/ISO and client specifications. Prepare detailed technical proposals, drawings, and commercial quotations. Deliver high-impact product demonstrations and presentations for mixed audiences. Partner with Sales, Product, and Engineering teams to ensure accurate scope, pricing, and deal execution. Support post-sale implementation, training, and customer satisfaction. Analyze and visualize data in Power BI to drive performance insights and strategic planning. Develop and maintain AI-assisted knowledge tools and internal training materials. Ensure compliance with all QHSE policies and model professional, ethical behavior. Qualifications Education: Bachelor's degree in Mechanical, Aerospace, Civil Engineering, or related field. Experience: 5+ years in product development and 3+ years in customer-facing technical sales or sales engineering. Preferred: Knowledge of welding and threading processes; familiarity with oil & gas standards (API, DNV, ISO). Technical Skills: Proficient with Power BI (data modeling, dashboarding, DAX basics). Experience with AI/automation tools (e.g., ChatGPT modules). Strong technical writing and presentation skills. Core Competencies Exceptional communication and problem-solving skills. Ability to simplify complex technical topics for diverse audiences. Strong project management and organizational capability. Customer-focused, ethical, and collaborative mindset. Adaptable in a fast-paced, evolving environment. Additional Information Travel: Occasional travel required for customer meetings, field visits, and industry events. Compliance: Commitment to all QHSE standards and corporate policies.

Responsibilities: Provide technical and design support Assemble and construct system assemblies. Conduct tests and debug electronic or electrical systems. Provide and/or expedite project documentation. Assist with organization, checking documentation for new equipment. Assist in production and/or manuals for new equipment. Requisition of parts and/or materials for projects. Prepare drawings and/or sketches, BOM (Bill of Material) list. Review and correct documentation for projects. Maintains and upgrades testing equipment. Repairs and troubleshoot electronic, electrical, and/or mechanical equipment. Technical support for mill and field equipment. Programing/debugging of the PLC and HMI systems (Allen Bradley and Siemens). Programing/debugging of AC/DC drives. Perform specific work-related tasks as assigned. Comply with all NOV Company and HSE procedures and policies. Job Requirements: 2-year technical degree and/or experience in the related field. Good verbal and written communication skills. High level of technical ability. Ability to solve complex problems and to relate to technical knowledge to specific applications. Experience with PLC programming (Allen Bradley and Siemens). Domestic and some international travel. Must be able to lift a minimum of 50lbs. Must be able to stand in uncomfortable positions for some periods of time. Must be able to work in varied weather conditions Must be comfortable getting dirty, and/or working in contaminated areas. Must be comfortable working at heights/manlifts. Valid driver license Willing to travel as needed (less than 20%)

Job Description Works closely with Quality Engineering, Manufacturing, Purchasing, and Design Engineering in the following functions. Measures key features and parts to ensure adherence to specification and control plans. Programs measurement equipment for automated vision system and CMM dimensional checks. Maintains quality records for batch and part traceability. Enter data in ERP system for record retention. Works closely with Suppliers, Manufacturing, Purchasing, Customer Service & Sales to arrive at corrective and preventive actions for defects. Conduct regular quality control tests and audits to verify measurement accuracy and compliance with industry standards and regulatory requirements. Analyze measurement data, identify trends, and assess instrument performance, including uncertainty analysis and statistical process control. Develop, write, and update measurement procedures, calibration protocols, and technical reports for internal use and compliance records. Document and report any deviations or discrepancies in measurement results and maintain detailed records for auditing and quality control purposes. Diagnosing and resolving issues related to measurement accuracy, instrument malfunctions, and process deviations. Collaborate with engineering and production teams to troubleshoot and optimize measurement systems and processes. Coordinate return of failures to suppliers through non-conforming process, follow up for corrective actions / implementation and ensure effectiveness. Conducts first article approval for new part numbers or change in supplier, as necessary. Performs evaluations and testing for new product introduction. Other duties may be assigned. Provides status reports to management as required. Follow all company safety policies and procedures and organize work areas for efficiency and safety. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Experience using and programming CMM equipment. Familiar with using measurement equipment. Calipers, micrometers, thread gauges, thickness and height gauges, pressure and leak measurement instruments. Excellent written and verbal communication skills including email, creating/editing word documents and powerpoint work instructions. Detail oriented person. Organizes and maintains electronic files so supplier and customer supporting materials are easily retrievable. Education & Experience: Two-year technical degree and at least two years' experience as a Quality Technician or equivalent combinations of skills and experience is needed. Specific Skill requirements include excellent oral and written communication skills, and proven teamwork ability. Must have basic understanding of statistics. Language Skills Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to apply basic mathematical concepts addition and basic statistical analysis like computing averages, frequency distributions, Pareto analysis and plot histograms, bar, line and pie charts. Computer Skills Proficient in using Microsoft Office applications, MRP platforms and Statistical software. Reasoning Ability Proven problem-solving ability. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Other: Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands/fingers to handle or feel and talk or hear. The employee is occasionally required to stand; walk and reach with hands and arms. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals and risk of electrical shock when in the operations or laboratory areas. The noise level in the work environment is usually moderate, but due to open office environment noise level may occasionally be high.

Works closely with Quality Engineering, Manufacturing, Purchasing, and Design Engineering in the following functions. * Measures key features and parts to ensure adherence to specification and control plans. * Programs measurement equipment for automated vision system and CMM dimensional checks. * Maintains quality records for batch and part traceability. * Enter data in ERP system for record retention. * Works closely with Suppliers, Manufacturing, Purchasing, Customer Service & Sales to arrive at corrective and preventive actions for defects. * Conduct regular quality control tests and audits to verify measurement accuracy and compliance with industry standards and regulatory requirements. * Analyze measurement data, identify trends, and assess instrument performance, including uncertainty analysis and statistical process control. * Develop, write, and update measurement procedures, calibration protocols, and technical reports for internal use and compliance records. * Document and report any deviations or discrepancies in measurement results and maintain detailed records for auditing and quality control purposes. * Diagnosing and resolving issues related to measurement accuracy, instrument malfunctions, and process deviations. * Collaborate with engineering and production teams to troubleshoot and optimize measurement systems and processes. * Coordinate return of failures to suppliers through non-conforming process, follow up for corrective actions / implementation and ensure effectiveness. * Conducts first article approval for new part numbers or change in supplier, as necessary. * Performs evaluations and testing for new product introduction. * Other duties may be assigned. * Provides status reports to management as required. * Follow all company safety policies and procedures and organize work areas for efficiency and safety. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. * Experience using and programming CMM equipment. * Familiar with using measurement equipment. Calipers, micrometers, thread gauges, thickness and height gauges, pressure and leak measurement instruments. * Excellent written and verbal communication skills including email, creating/editing word documents and powerpoint work instructions. * Detail oriented person. * Organizes and maintains electronic files so supplier and customer supporting materials are easily retrievable. Education & Experience: * Two-year technical degree and at least two years' experience as a Quality Technician or equivalent combinations of skills and experience is needed. * Specific Skill requirements include excellent oral and written communication skills, and proven teamwork ability. * Must have basic understanding of statistics. Language Skills Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to apply basic mathematical concepts addition and basic statistical analysis like computing averages, frequency distributions, Pareto analysis and plot histograms, bar, line and pie charts. Computer Skills Proficient in using Microsoft Office applications, MRP platforms and Statistical software. Reasoning Ability Proven problem-solving ability. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Other: * Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands/fingers to handle or feel and talk or hear. The employee is occasionally required to stand; walk and reach with hands and arms. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. * Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals and risk of electrical shock when in the operations or laboratory areas. The noise level in the work environment is usually moderate, but due to open office environment noise level may occasionally be high.

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities · Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. · Assemble equipment per engineered drawings or as instructed by others. · Inspect completed components for accuracy and functionality. · Maintain an orderly work area. · Properly maintain company supplied tooling. · Aid in developing of new procedures and improving existing procedures. · Must understand and comply with all safety rules and company policies of Weatherford. · Work assignments carried out to the highest quality level. · Performs any assembly type functions, using hand or power tools. · May operate both stationary and moving overhead cranes. · Operates any equipment needed to perform job. Experience & Education REQUIRED · 1-2 years prior assembly or manufacturing experience · Mechanical aptitude. · Ability to read blueprints and wiring diagrams PREFERRED · Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED · Good verbal communication skills. · Basic computer skills · Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities * Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. * Assemble equipment per engineered drawings or as instructed by others. * Inspect completed components for accuracy and functionality. * Maintain an orderly work area. * Properly maintain company supplied tooling. * Aid in developing of new procedures and improving existing procedures. * Must understand and comply with all safety rules and company policies of Weatherford. * Work assignments carried out to the highest quality level. * Performs any assembly type functions, using hand or power tools. * May operate both stationary and moving overhead cranes. * Operates any equipment needed to perform job. Experience & Education REQUIRED * 1-2 years prior assembly or manufacturing experience * Mechanical aptitude. * Ability to read blueprints and wiring diagrams PREFERRED * Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED * Good verbal communication skills. * Basic computer skills * Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Operational Technology (OT) Engineering Intern Division: Business Information Technology Services (BITS) Summary Description: The Operational Technology (OT) Engineering Intern will support the Control Systems team within BITS. This role assists in maintaining and enhancing NCEC's OT infrastructure. Key responsibilities include troubleshooting, supporting system enhancements, performing data analysis, and assisting with integration tasks such as commissioning new Distributed Energy Resource (DER) or Demand Response (DR) resources into the Distributed Energy Resource Management System (DERMS), Pi Historian, Energy Management System (EMS), and System Control and Data Acquisition (SCADA) systems. Academic and Trade Qualifications: Currently pursuing a degree in Engineering, Computer Science, Information Technology, or another analytically intensive field. Coursework or interest in power systems, energy technologies, or data analytics is preferred. Work Experience: Prior experience is not required, but exposure to the power/energy industry, engineering projects, or IT systems is a plus. Familiarity with SCADA, DER/DR, or related technologies is desirable but not mandatory. Responsibilities: Assist in developing and maintaining NCEC's OT systems, including design, database structure, integrations, and functionality. Provide support for OT applications to ensure system uptime and performance. Help with system upgrades, including testing new functionality and user interface improvements. Perform basic data analysis and reporting tasks to support operational decisions. Collaborate with team members on integration projects and documentation. Job Knowledge: Interest in the power/energy industry and emerging technologies. Basic understanding of communication technologies, databases, and IT concepts is helpful. Familiarity with Microsoft 365 tools. Willingness to learn tools such as SQL, Python, and Databricks. Abilities and Skills: Strong desire to learn and grow within the energy sector. Analytical mindset and problem-solving skills. Ability to work independently on assigned tasks with guidance from mentors. Relationships and Contacts: Reports To: System Analyst Directs: None Internal: Collaborate with BITS team members and other departments as needed. External: Limited external interaction; may assist with vendor coordination under supervision. Working Conditions: Normal office conditions with occasional travel. This is a hybrid position, requiring on-site work at NCEC's location on Mondays, Wednesdays, and Thursdays. Remote work is available on the remaining days of the week. Company Profile: NCEMC (********************************** is one of the largest generation and transmission cooperatives in the nation and is the power supplier for most of the state's member cooperatives. NCEMC acquires the power it sells to its member cooperatives in a number of ways, including asset ownership and Purchased Power Agreements. North Carolina Electric Membership Corporation provides equal employment opportunities (EEO) to all applicants for employment.

Job DescriptionAbout the role: The Electrical Engineering Technician/Electrical Engineer will have the opportunity to perform a broad range of work tasks with guidance and support from other engineering and management staff. Hydro-electric equipment and duties within the scope of this position includes but is not limited to generators, governors, excitation systems, generator circuit breakers, switchgear, switchboards, motor control centers, motors, control boxes, relay panels, lighting systems, power distribution systems and components, instrumentation (level, flow, pressure, temperature, vibration), and diesel engine-generator sets. A representative cross section of anticipated responsibilities is presented below. Why Eagle Creek? A comprehensive benefits plan: Medical, Dental, Vision, HSA, FSA, Commuter benefits, Voluntary Life, 401(k) Match. Eleven paid holidays per year, plus a competitive PTO schedule and time off to volunteer or give back to your community. Access to a company-funded Employee Assistance Program. Employee discounts through ADP LifeMart. Tuition Reimbursement as well as access to trainings & mentors for Career Progression and Personal Development. What you'll do: Prepare specifications and other engineering documents to procure, install, and commission a wide variety of hydro-electric equipment and systems. Plan and direct hydro-electric equipment refurbishment projects from disassembly to return to service. Troubleshoot equipment failures and perform root cause analysis to eliminate repeat failures. Represent the company at shop inspections and factory acceptance tests related to hydro-electric systems to ensure equipment in shop meets specifications and Industry codes. Direct contractors and hydro project staff at facilities to accomplish equipment repair and upgrades; ensuring electrical documents are updated to reflect field changes. Provide operations & maintenance with industry best practices that drive equipment operational reliability and minimize unplanned downtime. Manage project implementation and complete projects on time and on-budget. Collaborate with other engineering disciplines (mechanical, controls) to support project integration. Utilize equipment predictive data analysis to enhance equipment performance and recommend outage schedules for performing preventative maintenance. Develop electrical schematics and drawings to guide installation and maintenance of hydro-electric equipment and systems. What skills and experience you'll need: Bachelor's degree in engineering or a minimum of four years' work experience in a related field. Travel as required for project supervision and execution (~30%). Strong understanding of power systems, including generation, transmission, and distribution. The ability to work effectively in a team environment and collaborate with other disciplines. Experience with industrial electrical systems and maintenance practices. The ability to perform operational tasks which may include: The ability to climb ladders and to work at heights on or near water. The dexterity to manipulate various size components from valves to small electrical switches to computer keyboards. The ability to "handle" rapidly changing situations under stress. Eagle Creek Renewable Energy, LLC is an equal opportunity employer Powered by JazzHR DavV6dqd7t

About the role: The Electrical Engineering Technician/Electrical Engineer will have the opportunity to perform a broad range of work tasks with guidance and support from other engineering and management staff. Hydro-electric equipment and duties within the scope of this position includes but is not limited to generators, governors, excitation systems, generator circuit breakers, switchgear, switchboards, motor control centers, motors, control boxes, relay panels, lighting systems, power distribution systems and components, instrumentation (level, flow, pressure, temperature, vibration), and diesel engine-generator sets. A representative cross section of anticipated responsibilities is presented below. Why Eagle Creek? A comprehensive benefits plan: Medical, Dental, Vision, HSA, FSA, Commuter benefits, Voluntary Life, 401(k) Match. Eleven paid holidays per year, plus a competitive PTO schedule and time off to volunteer or give back to your community. Access to a company-funded Employee Assistance Program. Employee discounts through ADP LifeMart. Tuition Reimbursement as well as access to trainings & mentors for Career Progression and Personal Development. What you'll do: Prepare specifications and other engineering documents to procure, install, and commission a wide variety of hydro-electric equipment and systems. Plan and direct hydro-electric equipment refurbishment projects from disassembly to return to service. Troubleshoot equipment failures and perform root cause analysis to eliminate repeat failures. Represent the company at shop inspections and factory acceptance tests related to hydro-electric systems to ensure equipment in shop meets specifications and Industry codes. Direct contractors and hydro project staff at facilities to accomplish equipment repair and upgrades; ensuring electrical documents are updated to reflect field changes. Provide operations & maintenance with industry best practices that drive equipment operational reliability and minimize unplanned downtime. Manage project implementation and complete projects on time and on-budget. Collaborate with other engineering disciplines (mechanical, controls) to support project integration. Utilize equipment predictive data analysis to enhance equipment performance and recommend outage schedules for performing preventative maintenance. Develop electrical schematics and drawings to guide installation and maintenance of hydro-electric equipment and systems. What skills and experience you'll need: Bachelor's degree in engineering or a minimum of four years' work experience in a related field. Travel as required for project supervision and execution (~30%). Strong understanding of power systems, including generation, transmission, and distribution. The ability to work effectively in a team environment and collaborate with other disciplines. Experience with industrial electrical systems and maintenance practices. The ability to perform operational tasks which may include: The ability to climb ladders and to work at heights on or near water. The dexterity to manipulate various size components from valves to small electrical switches to computer keyboards. The ability to "handle" rapidly changing situations under stress. Eagle Creek Renewable Energy, LLC is an equal opportunity employer