Top Completion Engineer Skills

Below we've compiled a list of the most important skills for a Completion Engineer. We ranked the top skills based on the percentage of Completion Engineer resumes they appeared on. For example, 12.5% of Completion Engineer resumes contained AFE as a skill. Let's find out what skills a Completion Engineer actually needs in order to be successful in the workplace.

The six most common skills found on Completion Engineer resumes in 2020. Read below to see the full list.

1. AFE

high Demand
Here's how AFE is used in Completion Engineer jobs:
  • Constructed Instructions to the Drilling Contractor for all operations with an emphasis on Safety, Well Control, and LEAN.
  • Supervised and trained multiple new engineers of varying backgrounds for proper site supervision, operations execution, and safety.
  • Managed the daily (24/7) activities to efficiently and safely maintain completion engineering and operations on schedule.
  • Well operations have been within the AFE funds, on time, and greater than production expected.
  • Write detailed completions programs for safe and efficient operation while maintaining expenditures within the budget restraints.
  • Trained and experienced in refinery and oil-field work ethics, rules, regulations and safety requirements.
  • Work with the safety and environmental departments to implement the company's safety and environmental policies.
  • Reconciled AFE's, Bid out yearly contracts, and prepared and executed yearly Completion Schedules.
  • Conducted probabilistic cost-estimates for wells, committing to AFE values and being accountable for meeting them.
  • Prepared AFE's along with reservoir and economic forecast for all drilling projects that were undertaken.
  • Develop and align plans and activities toward optimal safety, efficiency, and risk management.
  • Process required creation and implementation of new standards and best practices for Safety Systems division.
  • Implemented cost analysis to run economics and developed AFE's for drilling and completions operations.
  • Maintained high levels of security and safety with using explosives and radiation.
  • Review and recommend safety procedures and standard drilling and completion practices.
  • Completed 1000+ Pump down jobs with 0 safety violations or failures.
  • Prepared AFE's along with economic performance on each project.
  • Designed safe well execution procedure leading to incident-free track record.
  • Generated and reviewed AFE's for capital expenditures.
  • Develop most efficient well intervention while being safe.

Show More

2. Completion Procedures

high Demand
Here's how Completion Procedures is used in Completion Engineer jobs:
  • Prepared and developed completion procedures that were used as the standard across completion operations.
  • Generated completion procedures, mobilization, reentry and fluid displacement.
  • Engineered, designed and implemented detailed completion procedures.
  • Designed and supervised completion procedures (including cost and time estimates).
  • Prepare & supervise completion & recompletion procedures for Permian basin- San Andres, Cherry Canyon, Bell Canyon.

Show More

3. Frac

high Demand
Here's how Frac is used in Completion Engineer jobs:
  • Act as department-wide stimulation expert by mentoring colleagues on technical and operational aspects of hydraulic fracturing and supporting all abnormal stages.
  • Served as a technical representative, ensuring all aspects of completion field procedures were executed properly for fracturing operations.
  • Re-designed and optimized fracture dimensionless conductivity to maximize productivity and minimize costs by 20%.
  • Participated in fracture stimulating two horizontal lateral wells.
  • Worked with reservoir engineer, production engineer and geologist, designing and overseeing hydraulic fracturing of wells in Utah.
  • Supervised hydraulic fracturing in more than 40 zones in deep tight gas wells testing up to 23 MSCFD.
  • Executed and optimized over 60 hydraulic fractures using STIMPLAN while tracking air-drilling performance on a daily basis.
  • Created fracture simulation models (GOHFER) for sample wells in each program to maximize new-drill performance.
  • Prepared programs for field operations which included installation of casing, fracturing, snubbing and well testing.
  • Design and Executed the first Hydraulic Fracturing job for the client followed by Post FractureAnalysis.
  • Reviewed job files to ensure pricing for fracturing operations were charged correctly to customers.
  • Recommend, design and plan hydraulic fracture treatments of both vertical and horizontal wells.
  • Supervised well completions including performing, fracturing, well clean-up & tank battery construction.
  • Design Hydraulic Fracturing job for the horizontal.
  • Design completions and execute field fracturing jobs.
  • Field execution and optimization of hydraulic fracturing & acidizing treatments.
  • Analyzed correlation between log-derived geologic properties and frac pressures.
  • Developed stimulation plans including hydraulic fracturing and acidizing.
  • Completed well reviews and frac design studies using FracPro PT to determine effectiveness of current design and future best practices.
  • Tested tractors, sliding sleeves, composite frac plugs, window milling, bits, anti-stall tools, and motors.

Show More

4. Rig

high Demand
Here's how Rig is used in Completion Engineer jobs:
  • Performed benchmark comparisons on four deep-water oil rigs and made recommendations for improvement.
  • Reduced rig operating time by changing completion equipment and procedures in highly deviated wells, the North Sea, Scotland.
  • Originated and managed $71mm and $62mm AFE's for equipment and services for these two wells.
  • Work with other engineers, rig supervisors and suppliers to design well completion procedures and equipment lay-out.
  • Generated technical requirements for offshore drilling rigs, drilling equipment and services for planned wells.
  • Prepare all documentations of the RTD and was accepted by clients and the rig crew.
  • Seized the opportunity to acquire rig and office experience in a fast track development program.
  • Ensured safe, efficient and cost effective installation of completion materials on the rig.
  • Service and redress completion tools in the workshop and at the Rig site.
  • Assist with future completions layouts on upcoming pads using previous rig layout knowledge.
  • Communicate with customer and rig crew on routine matters at rig site.
  • Assist and direct in the rigging up and down of equipment.
  • Learn basic rig components and different roles of service companies.
  • Supported management decision moving well to jack-up rig line.
  • Ensured that the rig is operated economically.
  • Prepared tenders-contracts associated with well production, workover / drilling rig- equipment and electrical logging.
  • Worked alongside senior management to incorporate hands on 12-week rig training program for new hire completion engineers for HAL.
  • Accumulated 120 + days of offshore practical experience on deepwater rigs with ZERO safety incidents.
  • Completed daily rig activities: casing tallies, cement calculations and wellbore diagrams.
  • Assist with rig-up and rig-down of tools and equipment at the wellsite.

Show More

5. Completion Operations

high Demand
Here's how Completion Operations is used in Completion Engineer jobs:
  • Managed all office staff associated with completion operations, exploration and regulatory.
  • Managed execution of operations in conjunction with drilling superintendent during completion operations.
  • Monitored all aspects of horizontal well completion operations and evaluated operations execution.
  • Managed all field staff associated with completion operations.
  • Designed and executed completion operations.
  • Familiarized w/ completion operations in the field and wrote up/analyzed job procedures for wells after drilling was completed.
  • Act as advisory resource on Stone-operated shallow water GOM and land Completion operations.
  • Monitored and evaluated completion operations and cost per well on daily basis.
  • Plan logistics for work-over and completion operations and well intervention work.
  • Worked offshore rotation to learn about drilling and completion operations.
  • Conducted well site logging and completion operations.
  • Travel to client worksites to perform Completion operations as lead engineer.
  • Designed and oversaw drilling and completion operations in the Anadarko Basin.
  • Lead engineer for remedial and fishing operations in Eagleford Shale completion operations.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Wireline

high Demand
Here's how Wireline is used in Completion Engineer jobs:
  • Provided support for wireline crew providing well rehabilitation and other down-hole services.
  • Operate and maintain the assigned specialized Wireline equipment with minimal supervision.
  • Performed wireline operations on customer new well developments.
  • Evaluated casing, coiled tubing, and wireline conveyed logging, intervention, and completion tools.
  • Purchased tools and equipment for 2 wireline trucks.
  • Operated slickline, conducted wireline interventions, and installed completions production tubing string.
  • Utilized SLB addressable switches for wireline/perforating.
  • Coordinated with Wireline on junk basket runs, caliper logs, setting packers and plug & perf operations.
  • Repair, maintain and diagnose oil wells via Wireline, Slickline and braided line.
  • Supervised wireline, braided line, and slickline operations.

Show More

7. Completion Design

high Demand
Here's how Completion Design is used in Completion Engineer jobs:
  • Compiled oilfield customer requirements and prepared innovative technical proposal for adequate equipment selection meeting completion design, etc.
  • Recommended and conducted engineering studies, which significantly enhanced completion design and operational performance.
  • Provided overall completion design, with necessary product and service packages, as well as support during and after job.
  • Liaised with sub-surface and production team to ensure life-of-field requirements are built into the completion design.
  • Reviewed and made appropriated suggestions to work over and well completion designs.
  • Lead internal completion design reviews and risk assessment for assigned wells.
  • Gained a strong foundation in completion design theory and implementation.
  • Phase 1 completion design meet project production goals.
  • Led post-installation auditing efforts that evaluated completion design performance for 9 wells with using data recorded during zonal pressure build-up analyses.
  • Optimize completion designs and programs for horizontal and vertical well applications.
  • Developed Completion Design and Cost Estimates for Teak-2 Permanent Gauge installation: Supervised six person Ghana execution team.
  • Provided technical assistance for the completion design of appraisal wells for the Vanco Ghana program.
  • Developed Completion Design and cost for Akasa-2 Interference Test and Permanent Gauge installation.
  • Carry out multi-stages completion designs for vertical and horizontal wells.

Show More

8. Sand

high Demand
Here's how Sand is used in Completion Engineer jobs:
  • Resulted in a successful test of the well with only one sand producing sand as was predicted by the log.
  • Imported from USA special surface well test, CT Unit and sand control package for high pressure gas work.
  • Well delivery team for Mad Dog Phase II, Water Injection in Soft Sands and Thunder Horse development wells.
  • Gained experience in directional drilling, both in mud and air applications on mostly tight gas sands.
  • Managed the Design and implementation of New Well Completions on tight gas sands in Western Wyoming.
  • Design and install completions in a sand prone environment involving CHFP's and OH SAS.
  • Organized and attended a sand control tools training course for several engineers.
  • Influenced team to install a sand control treatment on the MP 264 A-1 ST2 well, an additional $700K spend.
  • Authored and co-authored various reports to address well design concerns such as sand production and pressuredifferential.
  • Composed technical manual for downhole completion tools and sand control service tool to assist in company-wide product standardization efforts.
  • Completed the company's first Bone Spring 2nd Sand 10K lateral and Wolfcamp horizontal well.
  • Witnessed and supervised the inspection of 6-5/8 sand screens for several production well projects.
  • Designed sand control treatments and stimulations.
  • Prepare and load out for jobs Which include perforating, cementing, setting plugs and packers, dumping sand and acid.
  • Managed completion of Wolfcamp sand (NA Unconventionals) wells, comprising 14 to 20 stages using plug and perf technique.
  • Analyzed Kurten Sand formation of Eaglebine area by assessing Encana and datatrade wells.

Show More

9. Cost Estimates

high Demand
Here's how Cost Estimates is used in Completion Engineer jobs:
  • Developed cost estimates and performed benchmarking exercises.
  • Developed cost estimates, procured equipment and tracked construction progress to efficiently complete medium scale project.
  • Reviewed company's cost estimates and operational decisions to ensure company conducted business as safely and efficiently as possible.
  • Detailed programs and cost estimates for management approval.
  • Prepare engineering workload forecast and cost estimates.
  • Prepared scoping development cost estimates for offshore attic reserves.

Show More

10. Reservoir Characterization

high Demand
Here's how Reservoir Characterization is used in Completion Engineer jobs:
  • Participated in integrated reservoir characterization studies and played a key role on building a reservoir parameters model using Petrel.
  • Integrated fluid property and well log data in development of full-field reservoir characterization model for large unconventional asset.
  • Devised practical methodology for evaluating oil and gas properties by utilizing reservoir characterization and reservoir engineering activities.
  • Completed key, strategic global reservoir characterization and management projects including field development plan project in Malaysia.
  • Conducted reservoir characterization of five major reservoirs in the company.
  • Conducted several reservoir characterization studies for Burlington Resources.

Show More

11. Completion Fluids

high Demand
Here's how Completion Fluids is used in Completion Engineer jobs:
  • Instructed engineers on applications of completion fluids.
  • Monitor, manage and control the fluid rheology of completion fluids to provide the optimal performance of coil tubing operations.

Show More

12. Completion Programs

high Demand
Here's how Completion Programs is used in Completion Engineer jobs:
  • Ensured completion programs, program amendments, and dispensations to policy are prepared on schedule and are adequately risk assessed.
  • Issue final completion programs and prepare final hand over documents to asset teams.
  • Reviewed & Amend of drilling/completion programs.

Show More

13. Engineering Support

high Demand
Here's how Engineering Support is used in Completion Engineer jobs:
  • Provide completion engineering support on several projects under bid/negotiations.
  • Provide technical engineering support to operations.
  • Hired to plan and perform drilling engineering activities at office level and provide engineering support to field level operations.
  • Provide engineering support for complex subsea and unconventional well completions from the Houston based global completion engineering and technology group.
  • Provided technical engineering support for the Paint Manufacturing section to ensure all operational and quality conditions existed within the department.
  • Provide engineering support to manufacturing, materials, and test engineering to facilitate transfer of designs to manufacturing.

Show More

14. Site Supervision

high Demand
Here's how Site Supervision is used in Completion Engineer jobs:
  • Provided well site supervision in offshore Gulf of Mexico for Development and Exploratory Drilling, Completion, and Work-over operations.
  • Provide well site supervision of all stages of the completion installation.
  • Prepared drilling permits, drilling plans & well site supervision.
  • Provided completion procedures, cost estimates, and wellsite supervision for entire Houston Division.

Show More

15. Onsite

average Demand
Here's how Onsite is used in Completion Engineer jobs:
  • Provided onsite data interpretations required for services performed.
  • Supervised onsite 24/7 drilling and completion operations.
  • Worked directly with a consultant as the company representative onsite.
  • Conducted multiple onsite safety meetings and hazards analysis's daily to further improve workplace safety and implement new safety procedures.

Show More

16. BP

average Demand
Here's how BP is used in Completion Engineer jobs:
  • Initial testing of the exploratory well produced gas @ 80 million standard Cubic feet per day and 9000 BPD of hydrocarbons.
  • Performed work for clients such as Shell, BP, Chevron, and McMoran with one hundred percent safety record.
  • Interviewed potential new hire candidates at Penn State, UT Austin, and on BP's campus.
  • Conducted training classes on hydraulic fracture design and analysis for Challenger Engineers at BP America.
  • Transfer came after Atlas lost their alliance contract with BP.
  • Designed and executed completion procedures for HESS Corporation and BP America in GOM Deepwater and Wyoming.
  • Improved completions to yield 1000 bpd horizontal wells in the Powder River basin.
  • Designed and supervised BP's 1st horizontal well in the Wamsutter Field.
  • Contracted to BP USA on the Kaskida Appraisal Team in Keathley Canyon 292 (Lower Tertiary play.)
  • Provided engineering support for upper completion and subsea Christmas tree installation for BP deepwater Gulf of Mexico projects.
  • Engaged in well surveillance and well intervention work over operations (both rig and rigless) BP America
  • Designed and supervised well completions and workovers for the Wamsutter Field in Wyoming for BP America.

Show More

17. New Technologies

average Demand
Here's how New Technologies is used in Completion Engineer jobs:
  • Examine new technologies as they become available and propose testing and evaluation
  • Evaluated, tested and implemented new technologies with focus on manufacturing equipment.
  • Program included proposal of new technologies to improve efficiency.
  • Engineered successful process improvement by implementation of new technologies for approximate revenue of $6M in Q4, 2014.
  • Assisted with sales and marketing of new technologies to clients serviced within my region of coverage.
  • Optimized project costs and days, testing and utilizing new technologies, methods, and systems.

Show More

18. HSE

average Demand
Here's how HSE is used in Completion Engineer jobs:
  • Supervised deployment of completion materials at the well-site, compliance with HSE practices.
  • Participated in several QA/QC and HSE audits at vendor locations Coach and mentor graduate and new completion engineers.
  • Adapted implementation of HSE practices, Define performance goals, and trained employees to facilitate attainment.
  • Ensured delivery per policies and HSE requirements.
  • Coordinated full range of services, directing personnel in field applications and HSE issues.
  • Executed directional drilling program on $350K+ / day offshore rigs, exceeded ISO14001 and ISO9001 requirements and used QHSE standards.

Show More

19. Open Hole

average Demand
Here's how Open Hole is used in Completion Engineer jobs:
  • Completed the company's first 44 stage open hole sliding sleeve horizontal well.
  • Open hole trained but assigned to a cased hole district.
  • Executed open hole and cased hole evaluation.
  • Executed stimulation operations in cased and open hole completions with screens, SSDs and ICDs.

Show More

20. Subsea

average Demand
Here's how Subsea is used in Completion Engineer jobs:
  • Supervised Installations of IWS, Instrumented Fiber optic and gauge completions on Land and SubSea.
  • Published Installation and Commissioning Procedures and Drawings for Technicians and Engineers to execute offshore subsea operations.
  • Developed equipment specifications for subsurface and subsea equipment.
  • Provided Support to the completion team covering the planning and execution phases of subsea developments in the GOM.
  • Lead Engineer for development and qualification testing of two heavy duty wellhead connectors for subsea well completions.
  • Supervised gravel pack completions and subsea tree installations on site.
  • Lead completion engineer for 15ksi subsea GOM completion.
  • Re-installed the two trees in separate subsea completions.
  • Lead subsea and shelf completion engineer for Gulf of Mexico (GOM) on Subsea well completion and intervention projects.
  • Lead completion engineer for installation of subsea tree (XT) for offshore Brazil well from a floating drill ship.
  • Initiated the design of 14 SPAR wells and five subsea wells for the Boomvang/Nansen project in 3500' of water.

Show More

21. Service Companies

average Demand
Here's how Service Companies is used in Completion Engineer jobs:
  • Coordinated efforts of field operations, corporate support groups, service companies, JV partners, and various regulatory agencies.
  • Worked with service companies to update or design new tools to meet current completion challenges.
  • Managed numerous sub-contractors (engineering and service companies).
  • Evaluate the performance of service companies compared to required objectives and participate in Quarterly Performance Review meetings.
  • Interacted with Completion Foreman and Assistant Completion Foreman, service companies, and regulatory agency personnel.
  • Created Excel programs to analyze and verify calculations used company-wide as base programs for multiple service companies and operators.

Show More

22. Completion Equipment

average Demand
Here's how Completion Equipment is used in Completion Engineer jobs:
  • Conducted technical presentations on completion equipment and sand control tool systems functionality, operation, and application to peers and management.
  • Utilized proprietary software to model various well production scenarios for completion equipment prior to arriving at well-site.
  • Performed and/or validated technical calculations prior to running down-hole completion equipment at well-site.
  • Manage completion equipment inventory levels and contracts.
  • Provided regional technical sales support for completion equipment, mainly for Saudi Arabia, Bahrain, Kuwait and Iraq.
  • Ensured delivery of all required completion equipment, chemicals, personnel, and wrote procedures to install planned completions.
  • Ensured that QA/QC was performed on all completion equipment/tools before load-out.
  • Manage specifying and deliveries of all completion equipment.
  • Worked with Vendors to ensure that completion equipment was built, tested, and installed as per contractualrequirements.

Show More

23. Work-Over Operations

average Demand
Here's how Work-Over Operations is used in Completion Engineer jobs:
  • Designed and executed well work-over operations.
  • Supervised drilling, completion and work-over operations for numerous independent oil & gas companies.

Show More

24. Halliburton

average Demand
Here's how Halliburton is used in Completion Engineer jobs:
  • Ensured that all activities are performing in compliance with Halliburton Management System (HMS) processes.
  • Witness packer prototype test (Halliburton - 15k 7-5/8 heavy wall retrievable packer).
  • Treated wells at Pittsburgh International Airport and PA Utica utilizing Halliburton s Tier 4 fleet.
  • Completed a two week class for Halliburton's ADT service covering drill string integrity and hydraulics optimization.
  • Provide technical support to clients and other Halliburton team members at the well site.
  • Monitored the well via Halliburton Landmark's Discovery Web.

Show More

25. Technical Support

average Demand
Here's how Technical Support is used in Completion Engineer jobs:
  • Reviewed daily SAP costs ensuring projects on target while providing technical support for field personnel executing the designed programs.
  • Assist the Area Manager in developing the customer base through operational and technical support.
  • Eagle Ford & Woodbine: Peer Review and Technical support for projects.
  • Provide field personnel with technical support on completion and workover operations.
  • Provided technical support to a multidisciplinary team with focus on optimizing completions practices for unconventional reservoirs including Marcellus and Utica Shale.
  • Maintained test engineer duties while designing company products, providing technical support to customers, and sustaining manufacturing operations.

Show More

26. Completions Engineer

average Demand
Here's how Completions Engineer is used in Completion Engineer jobs:
  • Work Summary Drilling and Completions Engineer for the planning, executing and evaluating on all well operations including well-site coverage.
  • Assist Sr. completions engineer in well completions and logging services.
  • Worked at well-site as the Field Completions Engineer for standard completions, work-over, and well intervention operations.
  • Hired as Completions Engineer for a work contract based at Oxy of Elk Hills, Ca.
  • Monitored flowback operations as needed throughout my time as a Completions engineer.
  • Lead completions engineer for Uinta Basin operations Evaluated and redesigned completions in Uinta Basin.

Show More

27. TCP

average Demand
Here's how TCP is used in Completion Engineer jobs:
  • Supervised pre-completion operations including logging, DFIT well testing, TCP, tractor conveyed wireline perforation, and casing tests.
  • Managed E-line, TCP and PCP service contracts.

Show More

28. Wolfcamp

average Demand
Here's how Wolfcamp is used in Completion Engineer jobs:
  • Drilled horizontals in Mississippian formation in northern OK and horizontal Wolfcamp wells in Reeves Co, West Texas.
  • Organized field trial on Wolfcamp well, leveraging produced fluid to aid in dissolution process.
  • Completed several Wolfcamp wells in Crockett and Upton County, Texas.
  • Planned and drilled multiple Wolfcamp 1/2/3, 3rd Bone Springs and Avalon wells up to 10,000' lateral lengths.
  • Implemented new 4 string casing design for Wolfcamp B horizontals in the Mabee Field.
  • Planned and executed horizontal wells in Spraberry and Wolfcamp horizons for 3 rig lines with 9000' laterals.

Show More

29. ESP

low Demand
Here's how ESP is used in Completion Engineer jobs:
  • Performed all responsibilities necessary for operations on wells between drilling and production.
  • Identified and analyzed project and execution completions risks, developed risk responses.
  • Assisted manufacturing with electrical feed through systems as product responsible engineer.
  • Responded to technical and application requests, resolving operational issues.
  • Worked with the Well testing engineers for the equipment requirements for exploration wells for high pressure testing and ESP well testing.
  • Improved artificial lift method (Rod Pump, ESP, Gas Lift) and utilized existing assets to minimize CAPEX spending.
  • Served as lead engineer with responsibilities for completions planning and execution of 3 assets between Q4 2015 - Q2 2016.
  • Have inspired a sense of unity and respect among crews, which has helped to develop a team atmosphere.
  • Serve as both a team leader and mentor responsible for reviewing and testing 100+ units per shift.
  • Monitored in daily basis the ESP & PCP pump parameter to provide advice for field engineer.
  • Responded to company wide requests for support for problems associated with drilling and completion fluids.
  • Designed and optimized artificial lift systems including gas lift, ESP, and rod pumps.
  • Provide LOS/LOE data to field operations for their respective areas to help control costs.
  • Assisted manufacturing with the medium gate valves as product responsible engineer (PRE).
  • Promoted to engineer and accepted responsibility for welfare of crew and project.
  • Supervised ESP installation and removal in the North Sea, Scotland
  • Executed multiple string completions (tubing, heater string, ESP power cable, PCP gauge cable, PDG cable).
  • Well Types: Rod, ESP, Injection, Disposal.
  • Project database co-ordinator responsible for Tag input (all disciplines) and ITR allocation, M/C, P/C, and Preservation.
  • Perform all duties so as to meet the responsibilities listed in the health and safety handbook.

Show More

30. Multi-Well Pads

low Demand
Here's how Multi-Well Pads is used in Completion Engineer jobs:
  • Scheduled, planned, and oversaw all completion operations for horizontal single and multi-well pads.
  • Worked close with Completions Foreman and Consultants while assisting in Fracing and Drillouts on multi-well pads.

Show More

31. Artificial Lift

low Demand
Here's how Artificial Lift is used in Completion Engineer jobs:
  • Designed and maintained the use of artificial lift systems including Rod Pump, Gas Lift, and Plunger Lift.
  • Optimized production through the analysis of outflow performance and utilization of best fit artificial lift.
  • Exposed to various artificial lift method.
  • Lead engineer for artificial lift team that I proposed and implemented.
  • Recommended and implemented well-specific artificial lift methods (rod-pump, ESP, tubing and packer, plunger lift).
  • Reviewed well data to find suitable candidates for increasing production by stimulation, perforating or artificial lift.

Show More

32. RAN

low Demand
Here's how RAN is used in Completion Engineer jobs:
  • Supervised all aspects of the commercial transactions from initial order placement through delivery.
  • Organized surface testing to validate pressure testing capabilities and rupture disk tolerances.
  • Work directly with clients and company representatives to meet deadlines and keep jobs within price range and completed according to proposal.
  • Created live well kick tolerance monitoring which allowed for Decision Support Center to monitor live parameters of well control events.
  • Lead and prepare all procedures for the Ready To Drill (RTD) endurance test for 72 hours.
  • Monitor and inspect manufacturing of equipment and materials ordered in US and transported to Brazil.
  • Conducted a GoM Shelf D&C brainstorming and knowledge transfer session around dual completions.
  • Trained each new petroleum engineer that transferred in to the Completions group.
  • Qualify and complete quality assurance procedures on all tools and equipment.
  • Completed the company's first Granite Wash horizontal well.
  • Operated large equipment, such as cranes.
  • Contracted to Freeport-McMoRan Oil and Gas.
  • Take inventory of fluid storage and transferred back to the completion plants on the Texasgulf coast.
  • Designed horizontal completions in newly drilled Granite Wash and Tonkawa wells in Western Oklahoma.
  • Mocked up seatcomponents and conducted seat builds to ensure assembly and appearance.
  • Operated cranes, wireline truck, and other large equipment.
  • Water depths range from ~6000' to 8000' with formations up to 28,000' BML.
  • SIT's, FAT's and flow assurance.)
  • Provided support to development team to qualifyDLC coating, organized qualification tests, and provided results and reports for technicalassurance review.
  • Assisted with Transocean Deepwater Invictus rig build, rig modifications and crew readiness in South Korea DSME shipyard.

Show More

33. NPT

low Demand
Here's how NPT is used in Completion Engineer jobs:
  • Produced management of change (MOC) documents for well operation and nonproductive time (NPT) issues.
  • Track well data, invoices, day-rates, NPT, and man hours on Wellview.
  • Completed approximately 85 successful projects with 0% non-productive time (NPT) due to operator error.
  • Worked closely with field personnel to push performance, minimize NPT, and reduce cost / foot.
  • Schedule vendors and materials on location to ensure no NPT and reduction of cycle times.
  • Train field personnel in torque and drag procedures, helping them identify possible NPT events.

Show More

34. Completion Tools

low Demand
Here's how Completion Tools is used in Completion Engineer jobs:
  • Design and implement selection/installation of completion tools to maximize production.
  • Coordinate operation of completion tools to enhance production.
  • Handled bidding, procurement, and invoicing for stimulation services, coiled tubing, completion tools, and artificial lift.

Show More

35. New Completions

low Demand
Here's how New Completions is used in Completion Engineer jobs:
  • Managed fast turn-around projects that would allow production of new completions equipment to satisfy extremely tight deadlines and customer requirements.

Show More

36. QA

low Demand
Here's how QA is used in Completion Engineer jobs:
  • Carried out exercise in selecting equipment to be used and carried out QA/QC on selected equipment.
  • Provided the input to an Operations Completion Manual with guidelines, procedures and QA/QC instructions.
  • Supported machine shop with tool re-designing, product manufacturing, and QA/QC inspection.
  • Reviewed and supervised work done by QAQC inspectors.
  • Served as Administrative Support Assistant to South Park/Kandahar Airfield Area Office with forty Electrical/Mechanical Engineers/Fire Prevention/Resident/Office Engineers/Construction Rep/QA's.
  • Led the QA architecture team and defined key architectural models to guide the technical work of all QA architects.

Show More

37. QC

low Demand
Here's how QC is used in Completion Engineer jobs:
  • Programmed several families of PLC's, SLC's, Visual Basic for production stations and QC gauge support.

Show More

38. Cost Savings

low Demand
Here's how Cost Savings is used in Completion Engineer jobs:
  • Defined HAC testing and equipment requirements to expand laboratory's testing capabilities offering cost savings option compared to external test laboratories.
  • Developed operational procedures to clarify purchase order requirements reducing lead-time and producing substantial cost savings.
  • Achieved $1.2M in annual cost savings by facilitating design changes and increasing UL flammability rating for multiple cable families.
  • Gained $800K cost savings by converting designs using connectors with 70 micro inches of gold plating to 30.
  • Implemented a maintenance program for 747 flight deck windows generating $1M in maintenance cost savings per year.
  • Lead project teams with many disciplines of form the company to drive the cost savings Projects.

Show More

39. Spotfire

low Demand
Here's how Spotfire is used in Completion Engineer jobs:
  • Utilized Spotfire for analysis in optimizing Completions parameters.
  • Started a completion database for Spotfire to perform post job analysis and tracking.
  • Created competitor database to analyze completions across the U.S. within Spotfire.
  • Analyze various completion data with Spotfire.
  • Developed and managed a Spotfire production dashboard for cross-divisional consumption and reporting.
  • Gain proficient knowledge with Aries, Spotfire, DrillingInfo, Excel, Access, and PowerPoint.

Show More

40. DST

low Demand
Here's how DST is used in Completion Engineer jobs:
  • Supervised DST operations on floaters, South China Sea and Flores Sea.
  • Achieved appraisal objectives of an undeveloped reservoir through designing and executing a complex extended DST in a horizontal well.
  • Co-developed and sponsored a Mobil worldwide forum to review special coring needs for unconsolidated sandstone reservoirs.
  • Designed ESP pumps for DST tests using assumed data, and for final design using output data from well testing.
  • Devised data acquisition programs (DST, fluid sampling, logging) for exploration oil and gas prospects.
  • Designed cased-hole Drill Stem Tests (DST) to enable sampling and pressure testing during re-entry operation.

Show More

41. Completion Techniques

low Demand
Here's how Completion Techniques is used in Completion Engineer jobs:
  • Recommended optimal completion techniques to customers.
  • Conduct research to stay abreast of new drilling and completion techniques.
  • Compared completion techniques throughout different basins and varying techniques from different operators.

Show More

42. Cost Analysis

low Demand
Here's how Cost Analysis is used in Completion Engineer jobs:
  • Prepare performance and cost analysis.

Show More

43. Osha

low Demand
Here's how Osha is used in Completion Engineer jobs:
  • Maintained Safety as a primary value with Environmental and OSHA/MSHA compliance a close second.
  • Collaborated with team members and management to develop and implement safety and environmentalprocedures that comply with OSHA and DEP standards
  • Instructed classes for new technology operations in a two-week class in Rosharon, TX.
  • Managed organizational, OSHA and DOT safety and compliance.

Show More

44. Completion Costs

low Demand
Here's how Completion Costs is used in Completion Engineer jobs:
  • Prepared drilling and completion costs for CBM & conventional well AFE's.
  • Monitored and tracked Daily Completion Costs to within 5% of estimates.

Show More

45. Risk Assessments

low Demand
Here's how Risk Assessments is used in Completion Engineer jobs:
  • Led risk assessments, procedure reviews, and project lookbacks within plan, execute, debrief framework.
  • Prepare well risk assessments and recommend risks controls and mitigations.
  • Assist the responsible drilling engineer in conducting well- and operational risk assessments and HAZOPS.
  • Conducted risk assessments and ensured adherence to all company policies and safety rules.
  • Interact with office Drilling Engineers to close out and complete Risk Assessments.
  • Initiated MOC and conducting Risk Assessments, as needed.

Show More

46. Design Reviews

low Demand
Here's how Design Reviews is used in Completion Engineer jobs:
  • Participated in design reviews and provided safety assessments as required.
  • Performed mechanical design reviews and established environmental test criteria.
  • Participated in Preliminary and Critical Design reviews.
  • Chaired all design reviews involving electronics design.
  • Led the detailed design reviews, performed system acceptance testing, and trained the customers on-site.
  • Participate in Preliminary / Critical Design Reviews with the customers for a number of programs.

Show More

47. Company Representative

low Demand
Here's how Company Representative is used in Completion Engineer jobs:
  • Worked as a company representative on rod running unit for PCP installation.

Show More

48. EUR

low Demand
Here's how EUR is used in Completion Engineer jobs:
  • Utilized in Well Asset Development planning (Confidential Study; Yielding 20% higher IP's and EURs.)
  • Conducted field studies, identifying production/EUR enhancement opportunities, including improving reservoir/well performance and development opportunities.
  • Performed EUR and asset management assessments in order to maximize modeled risk-adjusted returns.
  • Performed rate transient analysis to estimate Expected Ultimate Recovery (EUR) and simulated rock volume.
  • Gas Strategy team looked at supply and demand across Europe.
  • Evaluated logs, picked perforations and created EUR maps.

Show More

20 Most Common Skill for a Completion Engineer

AFE16.5%
Completion Procedures13.5%
Frac9.4%
Rig9%
Completion Operations6.3%
Wireline6.1%
Completion Design4.5%
Sand4.4%

Typical Skill-Sets Required For A Completion Engineer

RankSkillPercentage of ResumesPercentage
1
1
AFE
AFE
12.5%
12.5%
2
2
Completion Procedures
Completion Procedures
10.2%
10.2%
3
3
Frac
Frac
7.1%
7.1%
4
4
Rig
Rig
6.8%
6.8%
5
5
Completion Operations
Completion Operations
4.8%
4.8%
6
6
Wireline
Wireline
4.6%
4.6%
7
7
Completion Design
Completion Design
3.4%
3.4%
8
8
Sand
Sand
3.3%
3.3%
9
9
Cost Estimates
Cost Estimates
2.9%
2.9%
10
10
Reservoir Characterization
Reservoir Characterization
2.6%
2.6%
11
11
Completion Fluids
Completion Fluids
2.2%
2.2%
12
12
Completion Programs
Completion Programs
1.9%
1.9%
13
13
Engineering Support
Engineering Support
1.8%
1.8%
14
14
Site Supervision
Site Supervision
1.8%
1.8%
15
15
Onsite
Onsite
1.8%
1.8%
16
16
BP
BP
1.8%
1.8%
17
17
New Technologies
New Technologies
1.7%
1.7%
18
18
HSE
HSE
1.5%
1.5%
19
19
Open Hole
Open Hole
1.5%
1.5%
20
20
Subsea
Subsea
1.5%
1.5%
21
21
Service Companies
Service Companies
1.5%
1.5%
22
22
Completion Equipment
Completion Equipment
1.5%
1.5%
23
23
Work-Over Operations
Work-Over Operations
1.4%
1.4%
24
24
Halliburton
Halliburton
1.3%
1.3%
25
25
Technical Support
Technical Support
1.3%
1.3%
26
26
Completions Engineer
Completions Engineer
1.2%
1.2%
27
27
TCP
TCP
1.2%
1.2%
28
28
Wolfcamp
Wolfcamp
1.1%
1.1%
29
29
ESP
ESP
1.1%
1.1%
30
30
Multi-Well Pads
Multi-Well Pads
1%
1%
31
31
Artificial Lift
Artificial Lift
1%
1%
32
32
RAN
RAN
0.8%
0.8%
33
33
NPT
NPT
0.7%
0.7%
34
34
Completion Tools
Completion Tools
0.7%
0.7%
35
35
New Completions
New Completions
0.7%
0.7%
36
36
QA
QA
0.7%
0.7%
37
37
QC
QC
0.7%
0.7%
38
38
Cost Savings
Cost Savings
0.7%
0.7%
39
39
Spotfire
Spotfire
0.7%
0.7%
40
40
DST
DST
0.6%
0.6%
41
41
Completion Techniques
Completion Techniques
0.6%
0.6%
42
42
Cost Analysis
Cost Analysis
0.6%
0.6%
43
43
Osha
Osha
0.5%
0.5%
44
44
Completion Costs
Completion Costs
0.5%
0.5%
45
45
Risk Assessments
Risk Assessments
0.5%
0.5%
46
46
Design Reviews
Design Reviews
0.5%
0.5%
47
47
Company Representative
Company Representative
0.5%
0.5%
48
48
EUR
EUR
0.5%
0.5%

11,057 Completion Engineer Jobs

Where do you want to work?