Component engineer work from home jobs

About Us Trinity's core values represent an assurance of quality, professionalism, and reliability. To us, they are the foundation of our company, the standards against which we constantly judge ourselves. We are focused on client satisfaction, employee growth, and quality assurance. Trinity Consultants is committed to achieving optimal performance with minimal adverse environmental and societal impacts. Trinity is committed to the health and safety of our employees and the protection of the environment. Effective Health, Safety, and Environmental (HSE) protection in our business is every employee's responsibility for every activity that is conducted in our workplace or while at client facilities. ESSENTIAL DUTIES AND RESPONSIBILITIES Prepare air permit applications, for client projects in accordance with applicable local, state, and/or federal agency air regulations or standards. Perform emission calculations. Review and evaluate state and federal regulation applicability. Prepare, review, and submit regulatory reports and routine compliance reports as required by permits and applicable regulations. Review and analyze results of emissions testing. Knowledge or experience with air dispersion modeling. Assist clients with permitting strategy and developing pathways to continuous compliance. Communicate with clients and regulators as appropriate. Support preparation of proposals. Qualifications: Bachelor's, Master's, or other advanced degree in Environmental/Chemical/Civil Engineering. Minimum 2 years of experience in environmental consulting, focused on air quality. Advanced working knowledge of Excel and an understanding of the Windows operating system and Microsoft Office 365. Demonstrated understanding of state and federal air quality regulations and specific knowledge of general air permitting process: NSR, Title V, PSD, NSPS, NESHAP, BACT, etc. Excellent written and verbal communication skills and ability to coordinate and work effectively in a team setting. Ability to work independently in a remote work situation when needed. Excellent attention to detail and completeness. Must be able to perform multiple tasks with firm deadlines, sometimes deadlines could be simultaneous. (The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job.) SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities.

Electrical Design Engineer (MEP) Houston, Texas $90,000 - $110,000 + Training + Career Progression + Support to Gain PE License + Bonus + Fantastic Benefits + Tuition Reimbursement + Work-From-Home Fridays! Are you an electrical engineer looking to work on exciting commercial MEP projects, with excellent training and a clear progression pathway to becoming a PE? This is an excellent opportunity to be the go-to electrical engineer on various technical construction projects, with the chance to progress into a Project Management position and gain your PE license. This growing company specializes in designing MEP systems for commercial projects. Due to their long-term expansion plans, they are looking for an Electrical Engineer to serve as a technical expert on diverse projects. They will also fund your PE license, granting you the opportunity to further advance your career. In this role, you will be based in the office, where you will be responsible for designing construction documents, producing electrical schematics and drawings, handling RFI documents, and liaising with clients and architects to meet project requirements. This is a great opportunity for an electrical engineer who wants to obtain their PE license and advance within a company that actively invests in its employees while working on technically challenging commercial projects. The Role: Serve as the technical expert for MEP systems in commercial projects Design electrical systems, liaise with site staff, and conduct site visits Office-based The Person: Electrical Engineer Degree in a relevant field Aspires to become a Professional Engineer

Your Job Georgia-Pacific (GP) is seeking a motivated and inquisitive professional with skills in chemical, paper science, or process engineering to support process optimization through remote asset monitoring of our paper machine operations. The Remote Engineer will be Remote Based in the Pacific Northwest to support mill assets in the area. The Collaboration and Support Center (CSC) team partners with our operating facilities by providing collaboration and support across multiple disciplines of expertise (GP and Vendors) to achieve scalable problem-solving across manufacturing sites and businesses. The team uses the best available technology with an enterprise-wide approach and primarily focuses on Asset Health, Process Control, and Process Optimization. Individuals in this space will need sound technical and communication skills and enjoy working as part of a team to solve problems. A successful individual in this role must be able to understand multivariate processes and their impact on production; must be willing to take personal initiative to understand unit operations, gain relevant knowledge, engage SMEs, and be able to work individually and as a part of a team in a dynamic environment. He/she must also be responsible and responsive to the needs of the sites that operate 24/7. What You Will Do The daily routine to support operating locations is listed below, and the expectation is that the CSC team members will work together to support operations and cover for one another when needed: Start each day by reviewing areas/assets of responsibility (25% of day) - Deviations, Trends, Potential Problems, Diagnose and notify appropriate subject matter experts (SMEs) and the site proactively. Identify equipment health, process controls, and process variability on areas/assets of responsibility - Pull SMEs, Vendors, Site into efforts to optimize performance/cost/quality (25% of the day) Work together as a CSC team (GP and Vendors) on chronic problems or large opportunities where the combined skills of the team can help to solve problems (50% of the day) Build and maintain process models aimed at proactively keeping processes within their operating window. Who You Are (Basic Qualifications) Bachelor of Science or higher in Engineering 3 or more years of experience working within or supporting manufacturing teams Experience presenting complex information to a variety of audiences Osisoft PI or relevant experience with other process historians Experience using Microsoft Office tools such as Excel, Word, PowerPoint, and Outlook Willing and able to travel to sites to build relationships with operations and to understand processes - 30% Experience in manufacturing. What Will Put You Ahead Bachelor of Science in Engineering, Math, Statistics, or Operations Research 3 or more years of experience in Pulp / Paper manufacturing. Process Control experience with DCS and PLC Experience in statistical analysis and problem solving. For this role, we anticipate a salary range of $100K - $130K per year. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here , aquí , or tu ). #LI-BMW

About Us 7-time winner of the 50 Fastest Growing Companies in the Twin Cities, All In One Accounting is the strategic accounting team for mission-driven nonprofits and growth-minded entrepreneurs. All In One Accounting's thorough and comprehensive set of services move our clients from financial chaos to business clarity and beyond. Simply said, our mission is to empower entrepreneurs and to support profitable Growth , equip them to Protect their assets, and enable nonprofits to Amplify their impact. A bit about the role: We're seeking an experienced and strategic Controller to join our team and help drive success for our construction/manufacturing small business clients. This role is pivotal in leading delivery teams, mentoring accountants, and providing high-level advisory services to help growth-minded entrepreneurs and mission-driven nonprofits achieve their business goals. As a Controller, you'll own client relationships while leading internal delivery teams to ensure exceptional service delivery. You'll work alongside Accountants and CFOs in a dynamic, multi-client environment that requires both strategic thinking and hands-on problem-solving skills. Now about you... You're a strategic leader and mentor You excel at strategically building and leading high-performing teams while fostering enduring client partnerships. You take full ownership of team development and success, providing thoughtful guidance and mentorship to accountants while ensuring exceptional client service delivery. You understand your pivotal role in driving both client success and organizational growth, making decisions that align team capabilities with long-term business objectives You're adaptable and consultative We work primarily with smaller organizations that have big goals. You adapt your approach to meet each client's unique needs while maintaining consistent quality across all engagements. You thrive in a fast-paced environment managing multiple client relationships and can shift seamlessly between strategic planning and hands-on problem-solving. You're bursting with initiative and curiosity You excel at analyzing financials and translating complex data into actionable insights for non-financial stakeholders. Your natural inquisitiveness drives you to dig deep, understanding what truly powers each business's success. You proactively identify opportunities for process improvement and automation, helping clients achieve their long-term goals. By staying current with industry trends and continuously expanding your expertise, you're always finding innovative ways to add value and drive efficiency while developing tailored solutions that align with each client's unique needs. More about the Controller role: Wearing multiple hats and saying "yes" to a variety of challenges are the table stakes for the Controller role. Your specific responsibilities include: Lead and oversee delivery teams, providing mentorship and guidance to accountants Own and nurture client relationships, ensuring delivery of value-based services Design and implement strategic solutions; this role requires both hands-on expertise and strategic planning abilities Develop and maintain efficient systems and processes for financial operations Contribute to company goals through proactive client management and team development Provide strategic insights and recommendations to drive client success The specifics of the Controller role: Client Financial Leadership Lead month-end closing meetings with clients and internal teams to present financials Oversee preparation and review of monthly financial statements and key reports Analyze budget variances and communicate significant issues and opportunities Prepare cash flow forecasting and strategic recommendations Serve as proactive liaison with client's professional advisors (CPAs, bankers, attorneys) Team Leadership and Quality Control Oversee and mentor accountants on your delivery teams Review and ensure accuracy of all key financial processes: Balance sheet reconciliations AP/AR processes Cash management Month-end closing entries Payroll integration Implement and maintain robust internal controls Ensure consistent high-quality service delivery across all clients Internal Responsibilities Meet or exceed billable hours goals while maintaining service excellence Complete all internal deliverables (time tracking, capacity planning, quarterly initiatives) Actively participate in All In One Accounting's Brand Ambassador program, representing our mission and values Represent All In One Accounting professionally while fostering team collaboration Maintain highest standards of security compliance and asset protection Contribute to process improvements and best practices The successful candidate will have: Bachelor's degree in accounting, finance, or business administration, or equivalent experience 7+ years of progressive accounting experience, including team leadership Proven success in managing multiple client relationships in a consulting environment Strong mentoring and team development abilities Excellence in financial analysis and strategic planning Outstanding communication skills with both financial and non-financial stakeholders Demonstrated ability to manage competing priorities while maintaining quality Advanced technical skills with various accounting platforms Why All In One Accounting - The Benefits All In One Accounting offers all of our delivery team positions as either full or part-time with a mix of client interaction and internal team comradery. We strive to meet team members where they're at - so our roles vary between onsite and fully remote. Our company has been built by a team who likes to have fun, respect each other and works extremely hard to do right by each other and our clients. While working in a multi-client environment presents its own set of challenges, the greatest compliment we receive is that our work has changed the lives of our clients. Our five core values of Commitment, Foresight, Relationships, Tenacity, and Teamwork are at the core of everything we do. We've created an environment of continuous growth and are excited to see your talents! Salary and Benefits Salary: $85,000 - $125,000 Annual Bonus: Up to 10% of salary Comprehensive benefits package including: Medical, dental, and vision insurance 401K Life insurance Long and short-term disability HSA, FSA, and dependent care options Professional development opportunities All In One Accounting provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Salary Description $85,000 - $125,000

The Role The Manufacturing Engineer is responsible for developing automated solutions, implementing new processes, optimizing existing processes, automated data collection, and executing the industrial control and programming strategy for GTI's production facilities. This position will work closely with the multiple teams to ensure flawless and quick speed to market. Success is gauged on the ability to deliver quality, detailed, and efficient solutions at scale. The Manufacturing Engineer will play a pivotal strategic role in priority projects from a feasibility standpoint through a full IQ, OQ, PQ validation and hand-off with a technical transfer to the site production team. They work collaboratively with multiple teams to deliver productivity improvements and Continuous Improvement. Responsibilities 50% travel required Coordinate the efforts of Engineering and technical resources based on Senior Leadership Priorities and Site 90-day plan priorities. Work with other departments (i.e. Prod Development, Project Management, Quality, Compliance, Operations, etc.) to integrate new systems. Dedicate start-up management support for selected complex project integrations. Ensures constant updates are provided to the VP of Manufacturing on the status of projects and improvement efforts in the facilities. SME for automated packaging equipment, flow wrappers, beverage line, multi-combi scales, bag filling equipment, integrations, and automation. Conduct studies, identify problems, recommend alternatives, and implement solutions in coordination with other teams. Develop and deploy automated solutions for numerous processes to gain efficiency and streamline workflows. Provide support to Start-up facilities via technical transfer: Staffing Equipment layout and requirements Construction hand off Regulatory engagement Best-practice processes Technical transfer related to equipment Work with integrators, contractors, and site personnel to bring new functionality online and to troubleshoot issues as they arise. Work with site maintenance and facilities personnel to develop and execute preventative maintenance plans. Maintain up to date as-built records and drawings for existing and new deployments. Integrate existing equipment with live data stream to dashboard with historian, report generation, alarms, notifications, and live visuals for site teams to track daily production. Other duties as assigned Qualifications Bachelor's degree in engineering and 5+ years Operations and Engineering experience in a manufacturing environment. Proven strategic experience in overseeing all aspects of large-scale manufacturing projects Knowledgeable of TPM-based continuous improvement methodology Knowledgeable of Engineering problem solving Able to diagnose complex technical systems and develop simple human-machine interface and training solutions for optimal operations. Experience in industrial networking/automation (SCADA-Ignition, ITOT, cyber security), controls experience (PLC - AB, Omron, Schneider, ladder logic \ STX), business and data analytics for manufacturing operations (Power Bi, Tableau,) vision systems, and robotics. Highly motivated, self-directed, innovative and able to work independently or among teams with keen judgement, common sense and resourcefulness Adapts and thrives in a demanding, start-up, fast-paced environment Possesses a high level of critical thinking Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks. Operates with a high level of professionalism and integrity, including dealing with confidential information Must understand and comply with the rules, regulations, policies, and procedures of GTI Must have a solid understanding of the Medical Marijuana laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws. Safety and Compliance Be aware of hazards in the workspace. Retain and understand department specific training. Report safety incidents/ concerns and comply with follow-up actions. Be compliant with area safety requirements, state regulations and PPE requirements. Follow GMP, biosecurity, sanitation or other quality and compliance requirements. Perform record keeping accurately and completely as directed by a lead or supervisor. Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor. Report and escalate safety & quality concerns. Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product. Ability to work in a fast-paced, changing, and challenging environment Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$90,000-$110,000 USD

Each year, 2.5 trillion hours are spent on household chores. At Matic, we're on a mission to recapture that lost time, and we're doing it by revolutionizing home robotics. Our first product, also called Matic, is a Wall-E-esque floor cleaning robot. We've built what amounts to "full self-driving in the home” with real-time 3D mapping, adaptive path-tracking, and a precise semantic understanding of the home. Our breakthroughs in spatial AI allow Matic to work reliably in real homes, using only RGB cameras and neural networks running on-device. Privacy First What happens in the home, stays in the home. Our robots are private by design, with all data processing performed by the robot itself, not in the cloud. Our Approach Before the iPhone, consumers adopted several distinct devices; cell phones, PDAs, and portable music players each served a particular need. We believe in a similar progression for home robotics, starting with single-purpose robots and building iteratively toward more complex capabilities over time. Our Culture Matic is a tight-knit and collaborative team, singularly focused on building products our customers will cherish. We're ultra-hardworking people committed to solving tough problems that save precious time and energy. About the role As our Process Engineer based in Asia, you'll be our front-line technical expert ensuring every part and subassembly from our Asian supply chain meets Matic's exacting standards. Working remotely from China, Taiwan, Vietnam, or another strategic location in Asia, you'll embed yourself with our suppliers to drive quality, speed, and cost optimization across our entire manufacturing ecosystem. If you're passionate about building world-class manufacturing processes, thrive on solving complex production challenges across multiple suppliers, and are obsessed with achieving zero-defect quality at scale, we'd love to talk to you about being our technical champion in Asia. What you'll do Conduct on-site process audits at suppliers across China, Taiwan, Vietnam, and other Asian manufacturing hubs Implement and validate PPAP (Production Part Approval Process) for all new parts and engineering changes Perform gauge R&R studies to ensure measurement system accuracy across all supplier facilities Develop and maintain control plans, PFMEA, and process flow diagrams for critical components Drive root cause analysis and 8D problem-solving for any quality issues, working directly on supplier production floors Establish SPC (Statistical Process Control) systems and train supplier quality teams on data collection and analysis Design and validate inspection fixtures and go/no-go gauges for supplier incoming and outgoing quality control Conduct capability studies (Cpk/Ppk) and drive process improvements to achieve >1.67 capability indices Review and approve supplier tooling designs, first article inspections, and production readiness Implement lean manufacturing and continuous improvement initiatives at supplier facilities Develop supplier quality scorecards and drive corrective actions for underperforming suppliers Coordinate production trials and pilot runs for new products and processes Validate cycle times, yield rates, and throughput to ensure suppliers meet cost and delivery targets Create detailed work instructions and visual aids in local languages for supplier operators Perform DFM reviews with suppliers to identify cost reduction and quality improvement opportunities Manage ECO (Engineering Change Order) implementation across multiple suppliers simultaneously Build relationships with supplier engineering and quality teams to ensure alignment with Matic standards Travel 50-70% of time to supplier facilities across Asia for hands-on problem solving What we look for Technical degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or equivalent 4+ years of experience in supplier quality or process engineering in consumer electronics, automotive, or robotics Fluent in Mandarin and English (written and spoken) - additional Asian languages a plus Deep expertise in PPAP, APQP, and IATF 16949 or similar quality systems Proven track record of improving supplier quality and reducing defect rates Hands-on experience with injection molding, die casting, machining, and PCBA assembly processes Proficiency in statistical analysis tools (Minitab, JMP) and GD&T Experience with CMM programming and vision system setup for dimensional verification Strong understanding of Asian manufacturing culture and supplier management dynamics Ability to work independently and drive results without direct authority Experience with high-volume production (100K+ units/year) and scaling from NPI to mass production Knowledge of automation and Industry 4.0 implementation in Asian factories is a plus Excellent problem-solving skills with ability to think on your feet in production environments Comfort with remote work while maintaining strong collaboration with US-based team Valid passport and ability to travel frequently within Asia High level of maturity, ownership, and pride in your work Willingness to work across time zones and maintain flexible hours for critical issues We'd love to hear from you if... You are genuinely motivated to help those around you You are passionate about learning outside of your normal comfort zones You love diagnosing complex technical issues You are excited to do great work

Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies. With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products. Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth. Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process. This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers. Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers. This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH. Responsibilities: Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials. Education and Experience: Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management. Skills and Qualifications: Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word. Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits. Travel: Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%). Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to: Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance Salary Range: $110,000 - $125,000 plus annual company bonus program Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

We are seeking a talented individual to support our Quality Systems platform through the development of visualization and in-house solutions, specifically with Pipeline Pilot. The ideal candidate will have a strong mindset in business insights with a development to enable integration of current solutions into S/4 and Google Cloud. This role requires knowledge of industry-standard applications and database theory to optimize workflow and data processing, delivering data efficiently to the shop floor. Responsibilities + Provide technical expertise in a small team format to understand, design, and deliver a maintainable data pipeline. + Focus on the project scope involving Pipeline Pilot and SpotFire, requiring skills in SpotFire, Google BigQuery, and Pipeline Pilot. + Build and deploy datasets based on user requirements for visualization and reporting across multiple visualization platforms, ensuring quality and relational integrity. + Provide a clear lineage of data used within visualizations, along with documentation and organization. + Support the team with DevOps knowledge to build a solid deployment infrastructure. + Assist in building sprint schedules, assigning, and completing support tickets and bug trackers. + Develop data visualizations and drive reporting solutions based on feedback from engineers, IT developers, and end-users. + Work with managers, regional automation, or process engineers depending on the site. Essential Skills + Minimum Bachelor's Degree in Engineering, Computer Science, or related field. + 3-5 years of experience in Manufacturing, Life Science, Quality Systems, or related field. + 3-5 years of experience building production solutions with Bovia Pipeline Pilot, including component authoring, protocol design, and web services. + 3 years of experience with TIBCO Spotfire or PowerBi, including Google BigQuery, Iron Python scripting, data functions, Information Links, and Automation Services. + Domain knowledge in data process automation, scheduling, and data architecture using SQL, Python, R, SAS, or other common languages. + Demonstrated strong oral and written communication skills, persuasiveness, and ability to communicate complex analytical approaches to all levels of business leadership. + Experience in managing and communicating complex projects and collaborating with cross-functional teams to accomplish project goals within expected timelines. + ETL experience with different ranges of technology. Additional Skills & Qualifications + Knowledge of Denodo/Data virtualization experience preferred. + Knowledgeable on deployment process flow concepts. + Strong initiative and results orientation, with the ability to work independently with minimal direction. + Demonstrated ability to see differing perspectives and work cross-functionally. + History of meeting tight deadlines and providing accurate estimates of time required to complete complex tasks. + Demonstrated innovative solutions and self-led discoveries of new technologies. Work Environment This is a remote position, requiring work five days a week. Job Type & Location This is a Contract position based out of St. Louis, MO. Pay and Benefits The pay range for this position is $40.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. In the Manufacturing Engineer I role, you will have the opportunity to participate and contribute in process and product modifications, standards and improvements through knowledge of manufacturing equipment and processes, while increasing product quality, output and cost effectiveness for the corporation. Qualified candidates must be able to work an on-site schedule at our Chillicothe, MO facility. Role Responsibilities: * Supports product quality by development and implementation of methods and procedures for process control, process improvement, testing and inspection to ensure that the products are free of flaws and function as designed. * Performs product testing and analysis to ensure that potential defects and failure rates are minimized, and quality levels are maintained in the most efficient and cost-effective manner. * Implements quality control process sampling systems, procedures and statistical techniques. * Analyzes production limitations, standards, reports and defective products to determine trends and recommends corrective actions. * Recommends revision of specifications when indicated. * Represents quality assurance in product design and development projects. Develops the economics of any quality control programs when required. * Develop and update operating instructions for standardized and safe use of equipment. * Conduct testing of products and processes to ensure production occurs in an efficient and cost-effective manner. * Conducts studies for process and product improvements that are aligned with specifications, quality standards and cost estimates. * Conduct studies of plant layout, production line efficiency and production line control and prepare recommendations to increase product quality and effectiveness. * Provide technical support to developers to ensure developed processes and products function as required and are manufacturable. TRAVEL Up to 5% Minimum Qualifications: * High School Diploma * (6) months experience in the manufacturing field Preferred Qualifications: * Bachelor's degree in engineering or related field * 3+ years in relevant quality / manufacturing experience * Ability to effectively communicate internally (within the facility and with Corporate Support personnel) and externally with leaders in the supply chain and even with Customer contacts as needed * Ability to work independently without direct supervision * Communicate and collaborate with internal cross functional groups to improve production process with the goal of maintaining a repeatable process and quality product * Able to perform trouble shooting activities to determine root cause, propose and implement solutions to reduce risk and update documented processes Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Manufacturing Engineering, Supply Chain, Root Cause Analysis Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

The Manufacturing Engineering department is a combination of product design and process improvement. This position will be responsible for creating new part designs to reduce installation time, increase build quality and prevent future warranty claims. This position will also require the associate to review and help streamline production processes to reduce build time and increase quality by removing waste from the process. Essential Duties and Responsibilities Develop new products using 3D modeling software (SolidWorks) Create detail drawings of 3D models (SolidWorks) Work with materials team to ensure parts are ordered and delivered on time to production. Analyze current production processes to find waste in the process. Formulate with team members a process to reduce found waste. Review drawings from body manufacturers to ensure fitment during installation. Work with chassis procurement team to implement measures that will decrease production time. Create production drawings for the final assemblers to use. Create layout drawings for the sales team to secure customer orders. Any other assignments as required. Required Skills and Qualifications Ability to read and comprehend part drawings and wiring or hydraulic schematics. Microsoft Office software - especially Excel and Word Ability to read and interpret documents; ability to write routine reports and correspondence. Must also possess the ability to speak effectively with customers or employees of organization. Preferred Skills and Qualifications Two (2) years of engineering experience in manufacturing environment or, Two (2) years of engineering experience in automotive design related field or, Two (2) years of engineering experience in vocational truck assembly. Ability to identify complex build challenges and implement solutions quickly and correctly. Ability to weld. Ability to understand 12V electrical systems. Ability to understand hydraulic plumbing systems. OTHER SKILLS AND ABILITIES Highly detail oriented and organized in work. Acceptable written and oral communication skills. Ability to work cooperatively and collaboratively with a customer service focus with all levels of employees, management, and external agencies to maximize performance, creativity, problem solving and results. Must have initiative and the ability act and operate independently with minimal daily direction from manager to accomplish objectives. Must possess a strong desire to learn. Mechanical skills / experience with heavy trucks and heavy equipment is a plus. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is occasionally required to walk; to climb stairs and ladders, use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is required to sit. The employee is regularly required to move about the facility. The employee must occasionally lift and/or move up to 50 pounds. The employee is required to seek assistance in the lifting of more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, moving mechanical parts, and vibration. The employee is occasionally exposed to extreme cold, and extreme heat. The noise level in the work environment is usually moderate to loud. Work well within a matrix organization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice.

Ncite Partners has been retained by a digital transformation firm in the manufacturing sector to find a Process Digitalization Engineer to join their team. This individual must be in a commutable or willing to relocate close to the Fort Collins, Colorado area. Once you are fully ramped up, you can work from home up to 80% of the time. Highlights A challenging yet supportive environment where you can grow and learn Opportunity to work with cutting-edge technology in industrial digitization, machine learning, and process control A culture of teamwork, innovation, and recognition Competitive compensation and potential for career advancement The Company This organization is a digital transformation expert in the manufacturing industry, specializing in data analytics, simulation, and automation. With over 65 years of experience, they work closely with customers to deliver innovative solutions that streamline workflows and reduce waste. Unlike traditional software providers, they develop and distribute customized software tailored to client needs, eliminating the requirement for IT teams or simulation specialists. Their goal is to empower manufacturing professionals, scientists, and researchers with the tools and resources needed to drive innovation and achieve success. The Role In this role, you will design and implement digital solutions to optimize manufacturing processes. Responsibilities include developing process control systems, analyzing data to identify areas for improvement, and collaborating with cross-functional teams to ensure efficient operations. Qualifications Degree in Physical Engineering (Chemical, Mechanical, Electrical, or Structural) or related field Strong background in process design and process control Excellent analytical skills for data analysis and problem-solving Experience in process engineering, preferably in the manufacturing industry Proficiency in software development and programming languages Knowledge of data analytics and simulation Experience with process optimization and continuous improvement methodologies Ability to work independently and remotely Strong communication and collaboration skills Relevant Skills and Experience (No need to check every box-these are the technologies and industries the team works with daily.) 3-10 years of experience in manufacturing industries such as Pharmaceuticals, Food & Beverage, Pulp & Paper, Bulk Chemicals, Refining, etc. Expertise in physical engineering, database management, machine learning, and process control systems Proficiency in software development with NodeJS, Remix, React for frontend/backend server work Advanced Python development, including FastAPI, networkx, and Celery for APIs and distributed tasks Experience building concurrent data pipelines and real-time data systems, including: Redis MQTT Go-lang for concurrent streaming GraphQL streaming Serialization/deserialization Developing and managing concurrent streams for real-time communication Test-Driven Development (TDD) experience using Playwright CI/CD pipeline implementation, including Jenkins Security best practices using Let's Encrypt / Certbot for SSL certificates OS and Deployment Architecture: Azure Virtual Machines (VM) Azure Hub and Spoke architecture Azure B2C for identity management Linux server administration TerraForm for infrastructure as code Docker containerization Azure App Services Field equipment communications and device integration experience, including: Serial communications Modbus and other industrial protocols Desktop application development using Electron Additional programming languages (valuable but less critical): C# (.NET) C++ OPC UA Client development Experience developing SQL/NoSQL databases and real-time database cluster systems (e.g., Kafka) Proficiency with SolidWorks, Finite Element Analysis (FEA), Finite Volume Method (FVM) Strong experience with process control systems, including ladder logic and remote instrumentation debugging Proficiency in root cause analysis, CAPA execution, and Six Sigma/Lean methodologies (FMEA, DMAIC) Developing production code for REST and WebSocket APIs in multiple languages and frameworks Developing cloud infrastructure with Azure Functions, Lambdas, Postgres DBs, and WebApps Experience with high-security implementation using MSAL and Azure B2C Experience with Git, Bitbucket pipelines, and other CI/CD tools Familiarity with machine learning frameworks (TensorFlow, PyTorch) and techniques, including NLP and computer vision Understanding of OT/IT integration for enterprise software design Ability to work on-site in factory settings as needed and provide critical production support after hours

At LifeStance Health, we strive to help individuals, families, and communities with their mental health needs. Everywhere. Every day. It's a lofty goal; we know. But we make it happen with the best team in mental healthcare. Thank you for taking the time to explore a career with us. As the fastest growing mental health practice group in the country, now is the perfect time to join our team! LifeStance Health Values Belonging: We cultivate a space where everyone can show up as their authentic self. Empathy: We seek out diverse perspectives and listen to learn without judgment. Courage: We are all accountable for doing the right thing - even when it's hard - because we know it's worth it. One Team: We realize our full potential when we work together towards our shared purpose. Benefits As a full-time employee of LifeStance Health, the following benefits are offered: medical, dental, vision, AD&D, short and long-term disability, and life insurance. Additional benefits include a 401k retirement savings with employer match, paid parental leave, paid time off, holiday pay and an Employee Assistance Program. Role Overview We are looking for a Process Engineer to support our Shared Services team at LifeStance Health. You will assist the Shared Services teams in the day-to-day operations and coordination of the teams' activities. This role is critical to keep the team moving forward on a fast-paced schedule, managing the complex coordination across different streams. This position is a remote role with the ability to sit within any US locality. Compensation: $85,000 - $100,000/annually Responsibilities: Provide Value Stream Mapping across cross functional teams for companywide processes Design processes with a keen eye for efficiency, standardization, and identifying key enablers that need to precede new systems and tools implementation Evaluate current operational performance and provide strategic plan for improvements using available information including data, feedback, and other information Design and/or redesign end-to-end business processes Utilize modeling and simulation development knowledge to project impacts of upstream changes on business operations such as operational KPIs and Shared Services staffing needs Identify and evaluate key discussion items and enable executive decision making Shift between high level strategic intent and diving into the details as needed Build relationships and support communication with necessary internal and external stakeholders Monitor, control, and manage business operations to meet the team's expectations and company goals Liaise between departments to ensure smooth operations delivery Coordinate and manage project tasks to ensure project delivery within allotted budget and timelines Create and maintain internal systems that allow the team to work and share knowledge efficiently Assist internal teams to achieve performance targets Identify problems in process and resolve them in a quick and timely manner Follow standard operating procedures for efficient business operations Maintain clear and accurate operations documents/procedures for reference purposes Skills & Experience: Bachelor's Degree required; Master's preferred Project Management Professional (PMP) or Six Sigma certification required 5+ years of relevant experience in process engineering, project management, program management, VSM, Agile, Lean and Six Sigma Advanced experience and knowledge of Microsoft Office products including Excel, PowerPoint, Visio, etc. Experience working with MS Project, SmartSheet, Monday.com, Jira or related project management tools Excellent presentations skills, particularly with executive level presentations Experience partnering with IT to enable new systems integrations Excellent proactive problem-solver who can leverage resources and execute tasks through completion Effective with project management, multi-tasking, understanding needs, and balancing priorities Excellent communicator with strong positive interpersonal, oral, and written communication. Great at building relationships with both internal and external teams Qualified candidates must be legally authorized to be employed in the United States LifeStance is an EEO/Affirmative Action Employer and does not discriminate on the basis of age, race, color, religion, gender, sexual orientation, gender identity, gender expression, national origin, protected veteran status, disability or any other legally protected status Demonstrates awareness, inclusivity, sensitivity, humility, and experience in working with individuals from diverse ethnic backgrounds, socioeconomic statuses, sexual orientations, gender identities, and other various aspects of culture LifeStance provides the compensation range and benefits that it in good faith believes it might pay and/or offer for this position. LifeStance reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, or federal law. #LI-Remote #LI-KO1 LifeStance is an equal opportunity employer. We celebrate diversity and are fully committed to creating an inclusive work environment for all our employees. Learn more about Diversity, Equity and Inclusion at LifeStance.

At Ford Motor Company, we believe freedom of movement drives human progress. We also believe in providing you with the freedom to define and realize your dreams. With our incredible plans for the future of mobility, we have a wide variety of opportunities for you to accelerate your career potential as you help us define tomorrow's transportation. In this position... As part of our Manufacturing team, you'll help build the world-class, state-of-the-art smart vehicles the world expects from us. Within our plants around the world, we're constantly developing new technologies and processes to further increase our efficiency. That means we're continually seeking diligent, determined performers who think outside the box to help us find better and more efficient ways to manufacture our vehicles. You'll have... Bachelor's degree in mechanical or an equivalent manufacturing engineering Willingness to travel and support launch activities at our North American Assembly plants (USA, Canada & Mexico) Travel is required including co-location at a North American Assembly plant for 9 or more months depending on scale of vehicle launch. 1 or more years of Microsoft Office experience to include Word, Outlook, Excel and PowerPoint Up to 40-50% travel required Even better, you may have... Solid background with virtual manufacturing tools Experience with tooling, process, quality, and or facility equipment in a production environment. Excellent communication and presentation skills Working knowledge of statistics (control charts, data collecting, etc.) You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all of the above? No matter what you choose, we offer a work life that works for you, including: • Immediate medical, dental, vision and prescription drug coverage • Flexible family care days, paid parental leave, new parent ramp-up programs, subsidized back-up child care and more • Family building benefits including adoption and surrogacy expense reimbursement, fertility treatments, and more • Vehicle discount program for employees and family members and management leases • Tuition assistance • Established and active employee resource groups • Paid time off for individual and team community service • A generous schedule of paid holidays, including the week between Christmas and New Year's Day • Paid time off and the option to purchase additional vacation time. For more information on salary and benefits, click here: ***************************** This position is a range of salary grades 5-8. Visa sponsorship is not available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. Candidates who are in commuting distance to a Ford hub location may be required to be onsite four or more days per week. #LI-Hybrid #LI-PS2 What you'll do… In this key role, you will provide manufacturing engineering leadership throughout a new model development program - from initial concept through final assembly. This will involve the application of lean manufacturing principles to ensure the highest quality, most efficient processes and products possible. You will: Provide manufacturing engineering leadership throughout a new model development program, beginning at initial concept through launch at the final assembly facility. Development of tooling and facilities based on product and process. Apply lean manufacturing principles. Lead virtual manufacturing assembly builds. Drive resolution of manufacturing issues. Interface with Design and Release activities. Develop formal assembly process instructions and enter the process sheets into VPS system. Lead assembly tooling specification purchase, installation, start-up, and commissioning at the assembly site. Track all open tooling and process issues and drive to closure including meeting all exit criteria deliverables - cycle time, throughput, workstation readiness, etc. Prepare management presentations. Drive quality, cost and labor improvements. Support new model launches. During launches, the position will require extensive travel, standing, and walking in a plant environment. Deliver dimensionally in-spec parts for their respective system. Understand component data and a system impact. Deliver cycle line layouts and work with the assembly plants to have a complete operator/equipment workstation ready for launch. Operate in stressful situations within timing constraints Work with minimal direct supervision

**Introduction to BlueOval SK** At BlueOval SK, we will lead the transformation of the electric vehicle (EV) battery business through partnership (Joint Venture formed by Ford and SK On) to provide products and processes to increase our customers' experience. As the future of BlueOval SK, you will help lead the battery revolution by working alongside our teams as we build the batteries required for electric vehicle business excellence. Ford and SK On are investing billions in Kentucky and Tennessee including building three state-of-the art battery manufacturing facilities between the two campuses at BlueOval City in Tennessee and BlueOval SK Battery Park in Kentucky. These brand-new advanced manufacturing facilities will use Ford's 100-years of automobile manufacturing expertise and SK On's 30+ years of electric vehicle battery expertise to become the world's best battery manufacturer. The Manufacturing / Process Engineer at BlueOval SK - BlueOval City in Stanton, Tennessee will have a unique, once-in-a-lifetime opportunity to be a key member of the start-up team, launching the facility from the ground up. **Key Areas of Responsibility:** + Support Manufacturing Process Engineering activity for Final Assembly + Drive continuous improvement in safety, quality and productivity + Apply engineering principles and analytical techniques to establish and continuously improve manufacturing processes and products + Develop action plans as required to investigate and prioritize quality concerns and verify corrective actions on internal processes and supplier processes + Conduct job ergonomic evaluations and deliver corrective actions as required + Analyze Cell / Array scrap root causes; engage in mapping and corrective actions to reduce waste + Create process and instruction sheets supporting quality methods and processes + Deliver capable processes and tools accordingly + Lead role in resolving assembly related concerns. Lead variability reduction and lean manufacturing initiatives and best practices + Ensure compliance to Plant, Corporate, Governmental and Environmental standards + Support ISO 14001 compliance and support internal ISO auditing and compliance as required + Identify OEE / throughput constraints and drive root cause improvements **Minimum Requirements:** + Education: Bachelor's degree + Experience: 5+ yrs of related experience + Ability to support any shift in a 7-day work pattern + Candidate must be flexible to significant travel during initial plant start-up phase + Candidate must be willing to work remotely and in-person at temporary facilities as needed during initial plant start-up phase + Successful candidate must be able to demonstrate leadership behaviors consisting of outstanding interpersonal, teambuilding, and communication skills **Preferred Requirements:** + Education: Bachelor's degree in Engineering + Experience: + Effective oral and written communication skills + Lean Manufacturing and Six Sigma experience + 8D and 5Why corrective action and problem solving skills + Lean Tools - 5S, Kanban, Poka-yoke, and Value Stream Mapping + TQM and Kaizen Methods + FMEA, PPAP, and DOEs experience + Visual Factory Management + Ergonomic analysis knowledge and experience **About BlueOval SK** At BlueOval SK, we will lead the transformation of the electric vehicle (EV) battery business through partnership (Joint Venture formed by Ford and SK On) to provide products and processes to increase our customers' experience. As the future of BlueOval SK, you will help lead the battery revolution by working alongside our teams as we build the batteries required for electric vehicle business excellence. We have a wide variety of opportunities for you to accelerate your career. **The Opportunity** Ford and SK On are investing billions in Kentucky and Tennessee including building three state-of-the art battery manufacturing facilities between the two campuses at BlueOval City in Tennessee and BlueOval SK Battery Park in Kentucky. These brand-new advanced manufacturing facilities will use Ford's 100-years of automobile manufacturing expertise and SK On's 30+ years of electric vehicle battery expertise to become the world's best battery manufacturer. **For more information about BlueOval SK plans, please** **Follow this link.** **What you'll receive in return:** As part of the BlueOval SK family, you'll enjoy excellent compensation and a comprehensive benefits package that includes generous paid time off (PTO), retirement contributions, incentive compensation and much more. You'll also experience exciting opportunities for professional and personal growth and recognition. If you have what it takes to help us lead the transformation of the EV battery business, we'd love to have you join us. **Benefits Include** : + 401k plan with retirement planning services + 401k company matching after completing three months of service + Medical and prescription drug coverage + Dental and vision coverage + Preventative Care + Eligibility for great ancillary benefits including: Flexible Spending Accounts (FSAs), Short-Term Disability (STD) and Long-Term Disability (LTD), Employee Basic Life and Accidental Death Dismemberment (AD&D) insurance, and Employee Supplemental Life Insurance + Access to Paid Time Off (PTO) after completing probationary period and Emergency PTO + Parental Leave + Access to Ford Vehicle Discount Program + Climate-controlled working environment + For a full list of benefits, visit our website: + ************************************ Candidates for positions with BlueOval SK must be legally authorized to work in the United States. BlueOval SK does not sponsor employment VISAs for candidates at this time. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status.

Kneat enables regulated organizations to move from paper-based validation to intelligent, digitized, paperless solutions. And we do it through the ongoing development of a powerful, purpose-built software platform. In 2014, after eight years of intensive software development, we launched Kneat Gx-the world's most advanced validation software to help revolutionize the speed, precision, transparency, and intelligence of validation in the Life Sciences sector. Our solution is now used by some of the world's leading Life Sciences companies. What we're looking for As Kneat continues to expand, we are looking for an enthusiastic Process Engineer to join our Operations department. This role will be remote in nature and based in the United States. Position overview Reporting to our Process Engineering Manager the Process Engineer will lead the delivery of digital validation solutions and process improvement initiatives for our life sciences customers. The successful candidate will lead implementation project execution, collaborate with cross-functional teams, and engage with customers to ensure high-quality outcomes. We are seeking someone with a strong background in validation engineering or life sciences who is curious about SaaS platforms and eager to work at the intersection of regulated processes and digital innovation to ensure our customers derive maximum value from the Kneat Gx platform. You'll work directly with customers, manage project delivery, and contribute to continuous improvement across tools and practices. If this sounds like you, we want to hear from you! Responsibilities · Lead customer projects from planning through to delivery, ensuring quality and compliance. · Translate customer processes into digital workflows using validation software. · Act as the main technical contact for assigned projects, supporting both customers and internal teams. · Contribute to internal documentation, training, and process improvements. · Communicate clearly with stakeholders and support knowledge sharing across teams. · Apply strong understanding of validation principles and industry standards to project work. · “Deliver training and guidance to internal and external users on platform functionality.” · “Support onboarding and mentorship of junior team members Minimum qualifications · Bachelor's degree in Engineering, Science, or a related field. · Typically a minimum of 3-5 years of experience in a regulated industry (e.g. life sciences, pharma, medical devices), with flexibility based on qualifications and project exposure. · Strong knowledge of validation practices such as CSV/CSA, CQV, or Process Validation. · Familiarity with regulatory frameworks such as GAMP, ICH, or 21 CFR. · Excellent communication and organisational skills. · Interest in software and digital tools, with a willingness to learn about SaaS platforms. · Ability to manage multiple projects independently and deliver to deadlines. Nice to haves · Postgraduate qualification (Masters) in Engineering, Validation, Project Management or related field. · Experience with digital validation platforms or SaaS tools (Kneat Gx, SAP, BMRAM, Trackwise, etc.). · A proactive mindset and interest in continuous improvement. · Project Management experience. · PMP certification is a significant bonus. What we offer you At Kneat, we truly value ideas and collaboration so we've created an environment that builds, protects, and celebrates teamwork. Our strong culture is central to our continued success. We offer programs and rewards that one would expect from a highly successful and growing technology company. · A fantastic culture, team, and energy. · Competitive compensation. · Comprehensive benefits package. · Flexible work arrangements. · Training and professional development. All applicants will need to fulfill the requirements necessary to obtain a background check. Kneat is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to Equal Employment Opportunity (EEO) regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or veteran status. Reasonable accommodations may be made to enable qualified individuals with disabilities or special needs to perform these essential functions. If you have a disability or special need that requires accommodation to complete this application form, please contact us at +353 (0)612 038 26 (Ext 2004) or email us at ************ for assistance.

OPPORTUNITY For a motivated engineer with a passion for the food & beverage industry to provide design services for clients throughout North America. Join an integrated team of architects, engineers and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will execute a broad set of engineering competencies, food processing knowledge and problem-solving skills as well as provide mentorship to others in an environment that values collaboration. POSITION Reports directly to the VP/Manager of Process Engineering. Participates on design teams with an emphasis on food manufacturing and processing equipment, process equipment layout and sanitation/CIP systems. Projects range from master planning exercises to conceptual & detailed design, and finish with startup & commissioning. This position will proactively interact with the client, vendors, contractors and Hixson's architecture and engineering teams. CANDIDATE 10+ years of experience in process engineering and design in food & beverage, nutraceutical, or related industries B.S. in chemical or food engineering; P.E. a plus Proven ability to develop BFDs, PFDs and P&IDs Experience leading HAZOPs and FMEAs Proficient in design and specification of process systems and equipment Competence in AutoCAD and process simulation software Strong interpersonal skills to work effectively with clients and associates COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit ******************* COMPENSATION Commensurate with experience, plus excellent benefits package: comprehensive health insurance, life insurance, paid time off, paid parental leave, 401K match, profit sharing, end-of-year bonus plan, remote work flexibility, tuition reimbursement, on-site fitness center, free parking and more.

Process Engineer Reports To: Engineering Manager Supervises: None Classification: Salaried, exempt, non-union Essential Duties & Responsibilities: The statements below are intended to describe the general nature and level of work being performed by the employee of this position. They are not intended to be an exhaustive list of all responsibilities and activities required of this position. Create and ensure that all part documentation includes drawings, process specifications, process routings, control plans, and operating instructions Ensure Engineering Change Requests (ECRs) are applicable and meet engineering specified standards Complete engineering documentation in a timely manner as determined by the department and related company goals Create new and robust processes with a focus on repeatability and efficiency Contribute to continuous improvement analyses to ensure the product being manufactured will satisfy quality requirements and meet or exceed cost objectives Originate ideas to solve engineering and manufacturing challenges from current and potential customers Assist in shop floor layouts leading to production efficiencies Determine appropriate packaging requirements and processes Design, order and maintain tooling appropriate for part processing Coordinate the efforts of operators to meet technical, safety, quality and cost objectives. Interface with Sales (and customers if required), Quality, and Scheduling during AQP and order review process. Additional duties as assigned Requirements: To perform this position successfully, the employee must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. This position involves access to technical data that is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR), which define a “U.S. person” to include a U.S. citizen, lawful permanent resident (green card holder), or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Employment is contingent upon the applicant's ability to meet these requirements or the Company's ability to obtain an export license on the applicant's behalf. Minimum of a Bachelor's degree or equivalent and at least two years of related experience and/or equivalent education & experience Previous experience in CNC Programming is preferred Previous experience creating fixture tooling/die design is required Previous experience using CAD and/or forging simulation software is highly preferred Proficient in Microsoft Excel, Word, Outlook Prior experience working with an ERP/MRP system is preferred Prior working knowledge of forged non-ferrous materials is preferred Demonstrated problem solving skills and excellent organizational and communication skills Ability to multi-task Position is required to be on-site, occasional work from home with supervisor approval is available Supports and demonstrates the Company's core values Working Conditions: This position is designed to work full-time. Days and hours of work are typically Monday through Friday, 8:00 a.m. to 5:00 p.m. An alternate schedule may be arranged or assigned based on the business demands, nature of duties performed, and other factors. Occasional flexibility to work evenings or weekends may be required as job responsibilities demand. Regular work, after hours and/or weekend work may be performed remotely, if the capability exists. Little to no travel is expected for this position. This position mainly operates in an office environment during work hours, but may be expanded to assist and support employees in other departments within the Company; Occasional exposure to production equipment and machinery. The employee will manage multiple priorities daily and may be interrupted frequently to meet the needs and requests of employees. The environment may be busy and noisy. All required personal protective equipment is provided. Physical Demands: While performing the duties of this job, the employee will spend most of his/her time sitting using computers and standard office equipment such as phones, photocopiers and fax machines. Occasional moving and/or lifting of 10 pounds, stooping, bending and reaching with hands and arms. While performing these job duties, the employee is regularly required to see, talk, and hear. Weldaloy Products Company provides Equal Employment Opportunity (EEO) to all applicants without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, veteran status, height, weight or arrest record in accordance with applicable federal, state and local laws.

Our Company PharMerica PharMerica is are seeking a seasoned Process Engineer with a strong background in pharmacy operations to drive continuous improvement and operational excellence across our pharmacy services. The ideal candidate will have 3-5 years of hands-on experience in process engineering. Experience working in a Long-Term Care (LTC) pharmacy environment is a plus. This role requires a strategic thinker with a passion for optimizing workflows, leveraging automation, and integrating emerging technologies such as Generative AI (GenAI), Large Language Models (LLMs), and Agentic AI. Remote opportunity. Applicants can live anywhere within the Continental USA. Travel: 25-50% Schedule: Monday - Friday, 8:00am - 5:00pm We offer: DailyPay Flexible schedules Competitive pay Shift differential Health, dental, vision and life insurance benefits Company paid STD and LTD Tuition Assistance Employee Discount Program 401k Paid-time off Tuition reimbursement Non-retail/Closed-door environment This position will be posted a minimum of 5 days Responsibilities Analyze existing pharmacy workflows and identify opportunities for standardization, process improvement, automation, and cost reduction Develop and maintain process maps, SOPs, and documentation to support operational consistency and compliance Lead Lean and Six Sigma initiatives to enhance efficiency, reduce waste, and improve service quality Collaborate with cross-functional teams including IT, operations, and clinical staff to implement innovative solutions Evaluate and integrate AI technologies (GenAI, LLMs, Agentic AI) to streamline decision-making, documentation, and customer service processes Monitor performance metrics and KPIs to assess the impact of process changes and drive data-informed decisions Support change management efforts and training programs to ensure successful adoption of new processes and technologies Qualifications Required Qualifications: Bachelor's degree in Engineering, Industrial Engineering, Pharmacy, or related field. 3-5 years of experience in process engineering, preferably in a pharmacy or healthcare setting. Proven expertise in Lean, Six Sigma, or other continuous improvement methodologies (Green Belt or higher preferred). Proficiency in process mapping tools (e.g., Visio, Lucidchart) and data analysis platforms (e.g., Excel, Power BI). Familiarity with automation technologies, GenAI, LLMs, and Agentic AI applications in operational settings. Strong analytical, problem-solving, and project management skills. Excellent communication and stakeholder engagement abilities. Preferred Qualifications: Experience in Long-Term Care (LTC) pharmacy operations. Exposure to regulatory compliance in pharmacy or healthcare environments. Experience with digital transformation initiatives or AI implementation in operational workflows. Key Competencies Strategic Thinking Innovation & Technology Adoption Process Optimization Cross-functional Collaboration Data-Driven Decision Making Change Management Travel Requirements: 25-50% travel About our Line of Business PharMerica, an affiliate of BrightSpring Health Services, is a full-service pharmacy solution providing value beyond medication. PharMerica is the long-term care pharmacy services provider of choice for senior living communities, skilled nursing facilities, public health organizations, and post-acute care organizations. PharMerica is one of the nation's largest pharmacy companies, offering unmatched company culture, employee development, and advancement opportunities. For more information, please visit ******************* Follow us on Facebook, LinkedIn, and X.

This role will be responsible for maintaining and improving production across various products and equipment at our West Union manufacturing facility. Why Work for CaptiveAire? Nation's leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. What I truly admire about CaptiveAire is the company's unwavering commitment to innovation and continuous improvement… Equally impressive is the culture of open communication that exists throughout the organization. From my own experience, upper management never takes the stance that a task is “not their job.” Instead, there's a shared understanding that every role is essential to the company's success. This mindset, combined with the transparent communication across departments and facilities, creates a collaborative environment that truly sets CaptiveAire apart. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: No two days are ever the same in this role. Tasks can include: Training operators in proper process, tool usage, and tool maintenance. Collaborating with other engineering teams on process efficiency, quality, and safety improvement projects. Developing new designs using 3D modeling software like Solidworks for carts or production tools. Then work with the fab shops to complete the fabrication of them in a timely manner. Work closely with contractors to coordinate utility needs such as air and electrical drops, and oversee the installation of new equipment. Coordinate daily, weekly, and monthly preventative maintenance tasks on machinery. Troubleshoot machines whenever the team needs extra support. Provide hands-on support to production lines as needed. Complete hands-on testing for new process changes From a Plant Process Engineer: I enjoy the constant problem solving and the drive toward innovation that keeps things exciting. I have had jobs in the past where the day could not end soon enough because I was ready to be done. This is not one of them. I find the job rewarding and find myself here past scheduled hours often not because I have to but because I want to. Primary Job Responsibilities: 95% of the workday will be on the manufacturing floor working on projects, operating and repair of equipment Involvement with equipment operators to ensure parts are programmed, training and any process related issues Responsible for working with Safety, Quality, and Industrial engineering teams on parts, assembly, and process improvements Implementation of Engineer Change Notices (ECN) and Process Change Instructions (PCI) Support production as needed, capable of building all products to the expected quality standards in the designated area of focus on an as needed basis Assist production staff with product related questions Work with Plant manager on various facility improvement projects Job Requirements: 0-10 yrs experience 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Must be strong in mechanical and electrical engineering. Internship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for 8 - 10 hours at a time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$85k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position. Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire's Drug-Free Workplace policy. #P1