Composite technician entry level jobs - 45 jobs

Job DescriptionDescription: Hartzell Propeller was founded in 1917 and is headquartered in Piqua, Ohio. Hartzell Propeller is the global leader in advanced aircraft propeller design and manufacturing technology for general aviation applications - both piston engine and turboprop - as well as custom propulsion solutions for electric, hybrid-electric aircraft and advanced air mobility programs. In 2021, Hartzell Propeller acquired Tanis Aircraft Products to expand Hartzell's heating products and expanded its offerings in the experimental propeller market with the acquisition of Whirlwind Propeller in 2024. Hartzell expanded its offerings in the MRO market with 2024 acquisitions of American Propeller Service, Texas Aircraft Propeller and Tiffin Aire Inc. Tiffin Aire Based at the Seneca County Airport, Tiffin Aire Inc. was founded in 1968 by Dwight and Jeanne Gnepper. It began with only three employees, two single engine aircraft, two hangars, and an office. By 1996, Tiffin Aire offered aircraft charter, flight instruction and rental, aircraft sales, aircraft maintenance, parts and oil sales, and propeller/governor sales and service. De-ice boot sales/installation and the Tiffin Aire Tug were added to the company product line in later years. Tiffin Aire is now owned by Hartzell Propeller, LLC out of Piqua, Ohio. Job Summary Tiffin Aire is seeking Aviation Composite Technicians to join our Service Center team. These roles support a variety of essential operational tasks, offering a workday with both routine responsibilities and special project assignments. Ideal candidates enjoy hands-on work, variation in daily tasks, and contributing to a team environment focused on quality and craftsmanship. Key Deliverables · Support propeller builders and prepare finished products for shipment. · Perform detailed deburring, sanding, and cleaning of complex composite components. · Conduct entry-level equipment maintenance and assist with machine cleaning. · Disassemble, degrease, media blast, and clean propeller parts. · Prepare, paint, and de-mask composite and metal propeller components. · Pick, pack, and crate small parts and complete propeller systems. · Read, understand, and accurately follow detailed work instructions. · Hand-lay composite material patterns on foam cores, precision molds, or other composite structures. · Perform additional tasks as needed to support production and operational success. Requirements: Education/Experience HS Diploma or GED required; experience in a manufacturing facility is a plus Technical Competencies Mechanical Aptitude: Demonstrated hands-on skills-such as vehicle/body work, construction, machining, or general mechanical ability. Manual Dexterity: Ability to perform detailed, precise work with hands. Process Discipline: Experience in reading and executing written instructions and process standards. Computer Skills: Ability to enter and retrieve data using basic computer systems. Behavioral Characteristics Applied Learning: Quickly learns and applies new processes and procedures. Teamwork: Actively collaborates to help the team achieve its goals. Adaptability: Comfortable shifting tasks as needed and adjusting to changing priorities. Work Management: Manages time effectively and uses downtime to support other tasks. Energy & Commitment: Willing to do what it takes to meet production needs. Quality Focus: Works with accuracy and care; ensures all details meet quality standards. Stress Tolerance: Maintains steady performance and professionalism under pressure. Why Join Tiffin Aire? We pride ourselves on a culture rooted in empowerment, accountability, integrity, respect, and drive. Our team values collaboration, safety, and a shared passion for aviation. We offer a comprehensive benefits package, including: Medical, dental, and vision coverage Paid time off Life insurance 401(k) with company match Company-provided Growth Participation Units (GPUs) And additional programs designed to support your personal and professional development Our GPU program, unique within the industry, encourages employees to think like owners and rewards continued contributions to Hartzell's growth. Additional Requirements This position is subject to pre-employment and random Federal Drug & Alcohol Testing, including screening for marijuana, cocaine, opioids, amphetamines, phencyclidine, and alcohol. Equal Opportunity Employer/Protected Veteran/Disability/E-Verify

Job DescriptionDescription: Established in 1964, Custom Materials, Inc. is a proven source for the custom fabrication of electrical insulation and components. We personally serve major manufacturers and suppliers of electrical power generation equipment, distribution equipment, and controls. Components range from the insulation used in transformers, motors and motor controls to precision parts for the aerospace, military, medical, renewable energy, and other demanding industries. Companies appreciate our ability to deliver metal fabrications, plastic fabrications, even complete subassemblies. But in most every case, CMI is actually delivering a custom solution to a complex engineering, design or materials challenge. In fact, CMI takes on projects that others won't. Few fabricators can match our unique blend of 50 years of experience, reputation for innovation, skill of our team, expertise of our engineers, adherence to quality certifications, and commitment to client success. The company is looking for a self motivated oriented individual that likes new challenges everyday. The position offers an individual to use their full skill set to advance the interests of the company. The position also offers full benefits including healthcare, dental, vision, life insurance, short term disability, 401k retirement and profit sharing plans. Assist in the assembly, fabrication, and repair of products from composite parts and materials Assist in the fabrication and preparation of molds Assist in laying out composite materials for molding Verify and document in process work orders Ensure quality product by using necessary measuring equipment including calipers, micrometers and pi tapes Basic maintenance on equipment Meet production deadlines by following manufacturing schedule and procedures Requirements: High school diploma/GED required (2YR Technical Education Preferred) Familiarity with Microsoft Office suite Advanced written and oral communication skills Blueprint Reading Good Organizational Skills US Citizenship

Cincinnati, OH Shifts: 2nd Shift: 4/10-hour shifts Monday-Thursday with possible overtime Weekend Shift- 3/12-hour shifts Fri, Sat & Sun (starting at 4,5 or 6AM) Build an Aviation Career You're Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term. As a Composite Technician you'll set up and operate a variety of hand tools such as hammers, files, dremels, drills, presses, low temperature ovens, pullers and hand grinders to perform various operations such as blending, chasing threads, deburring, angle checking, coldworking metals, masking, and braze application. What you'll do: * Composite technicians are responsible for fabricating aircraft parts, accessories, and trim in accordance with technical specifications. * Composite technician jobs are detail-oriented and involve crafting, sanding, bonding, assembly, oven and autoclave cures with a variety of composite materials. * Responsibilities also include reading blue prints to ensure project accuracy and completion. * Ability to read precision measuring tools and instruments. * Ability to use a variety of hand tools, grinders, sanders, files, dremels, drills, and operate ovens. * Repairing components as needed per manual and router instruction. * Perform hot-bonding, wet lay-up preparation, and cures, using raw materials or pre-pregs, both glass and aramid fiber. * Perform repairs with the use of various adhesives and resins. * Remove and repair damage of honeycomb and core panels. * Repair of thermosets and thermoplastics using adhesive bonding. * Perform grinding, sanding, blending, deburring operation. Operates all power tools and equipment necessary to accomplish job assignment. * Accurately records time worked on shop order. * Demonstrates excellent communication skills, professionalism, and a positive customer service attitude without compromising quality. * The Composite Technician will work with and around a variety of chemicals and follow all OSHA standards in regards to personal protection equipment. Finally, responsibilities will include maintaining the shop floor free from clutter or debris and other duties as directed. * Performs other duties as assigned. * Presents a clean and neat work area to customers - facility cleanliness and general housekeeping. * Participates in continuous improvement of cell processes. * Cross trains in other complementary skills and seeks endorsement for those skills as needed to support production requirements. * Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. * Participates in the cross training of other technicians as needed to support production requirements. * Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. Basic Qualifications: * Must be authorized to work in the US. * Have the ability to read, write and perform basic math calculations. * Be able to work well with others. * Ability to read, understand and interpret blueprints. * 1+ year of experience with hand tools such as grinder, sander, file, etc. * Ability to lift up to 20 pounds (unassisted) for approximately 25% of the average work day. * Regularly required to sit for prolonged periods. Preferred characteristics: * Prior MRO/Military Component Repair experience desired. * Prior experience with auto body, metal fabrication and engine repair helpful. * Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels. * Experience with precision measuring instruments. Benefits that make life better: * Comprehensive Healthcare * 401(k) with 100% company match; up to 5% vested * Paid Time Off starting on day one * Bonus opportunities * Health- & Dependent Care Flexible Spending Accounts * Short- & Long-Term Disability * Life & AD&D Insurance * Learning & Training opportunities Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. Inclusivity Is Our Standard It is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex (including transgender status, sexual orientation, and pregnancy), national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #LI-AB1

Summary:Responsible for assisting and directing activities in the Mold PM area that will deliver timely and efficient preventive maintenance and repair of production molds, dies, tools, and fixtures. Mold PM Tech Responsibilities: Perform work within the preventive maintenance program once a mold is finished running or after a certain number of cycles. Wash mold with safety solvent to remove varnish and build-up from the molding process. Replace bent, worn, or broken injector pins. Inspect ejector system for proper alignment. Determine if injector pin holes need re-drilled and bored to a larger size, and the existing pins replaced with over size pins. Worn leader pins, bushings, and all bearing moving surfaces should be checked for wear and replaced/repaired as required. Clean and lubricant moving components in open and closed positions to prevent corrosion and wear. Make adjustments as required. Clean all vents; inspect for depth, width, and land; if necessary, have machined to original specifications. Drain and inspect water lines for blocked flow and leaks; inspect and/or replace 'O' rings, plugs, seals, and gaskets. Cavity surface is to be inspected for wear or erosion of plating or texturing. Clean and polish mold cavity surface as required to the original surface requirements. Inspect mold base for cracks, hardening, and corrosion. Fit, assemble, and tighten all bolts, clamps, and plates to specification. Make repairs to hot runners and nozzles and needed. Work to close tolerances, ensuring quality workmanship on all molds, tools, and fixtures. Maintain consistent and effective component cleaning and storage. Maintain equipment and work tools by performing regular cleaning and light maintenance; adhering to preventive maintenance requirements; following manufacturer's instructions; trouble-shooting malfunctions; and notifying management for machine malfunction and/or repairs. Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Qualifications / Skills: High school diploma or GED preferred. Advanced mechanical, machining, and troubleshooting skills all related to injection molding or wax molding. Must have proficient knowledge on tool assembly. Ability to read and interpret most manufacturing and tooling prints. Excellent problem solving abilities and attention to detail. Self-motivated and willing to work overtime when necessary to complete a project. Knowledge in the use and application of precision measuring instruments; including calipers, ID and OD micrometers, comparators, gauge pins, bore gauges, indicators, and various customer gauges. Mathematical: Ability to perform basic math computation; and to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

The Performing Arts Center (PAC) Substitute Technician is hired on a call-in basis to assist the PAC Technical Director and Assistant Technical Directors to prepare, run, and strike the technical aspects of any events at Clark State College and its Performing Arts Center and Conference Center. Duties Include: * Unload Technical Theatre gear from trucks and semis * Hanging, circuiting, gelling, focusing, and programming lights * Running Follow spots * Setting up Audio equipment * Moving masking * Setting up Orchestra Shell * Installing Pit Seats * Striking all Equipment following shows * Being on a running crew during a show * Other duties to ensure the highest quality live event Requirements: * High School diploma required * Technical Theatre background preferred * Ability to lift 50 pounds * We will train you Hours: Varied including weekends and nights. May not exceed 28 hours a week.

*EARN A $1,500 SIGN-ON BONUS! EDGE PLASTICS IS LOOKING FOR AN EXPERIENCED PROCESS TECHNICIAN! INDIVIDUAL MUST HAVE HANDS ON, PROVEN PROCESSING KNOWLEDGE AND EXPERIENCE WITH PLASTIC INJECTION MOLDS AND MACHINES. Starting pay based on experience. Position Summary: The Injection Molding Process Technician is responsible for troubleshooting and resolving molding process issues, including material flow, temperature control and cycle times. The Process Technician verifies correct set-up of molds, materials and processes and auxiliary equipment before machine start up to ensure part conformity and quality products. Job Responsibilities: The list is a comprehensive list meant to represent the most common or important duties of the position. Other duties may be required and/or assigned. Monitors and troubleshoots existing process parameters and production standards of plastic injection molding machines. Identifies and corrects problems that affect product quality, excess scrap, and cycle times. Start up, process and shut down injection molding equipment and lines. Assists with/has experience pulling and setting injection molds Assists with preventative maintenance of injection molding machines and robots Conducts mold and auxiliary equipment repairs as needed. Cleans molds, removes accumulated grease, oil, water to ensure proper working order and safe work environment. Works closely with maintenance personnel to ensure any maintenance and tooling issues are being addressed. Mix raw material for injection molding system as needed. Perform all duties as directed under the Plant Manager, Operations Manager, Processing Manager, Production Supervisor. Assists on production floor as business needs dictate. Maintains a clean work environment. Performs all tasks in compliance with company and OSHA safety policies and protocols and all applicable codes and standards. Education and Experience: Minimum of High School Degree Certification in Injection Molding preferred Minimum of two (2) years of working knowledge of Plastic injection molding Proven experience setting/pulling molds Experience driving Tow Motor and operating overhead cranes Basic computer knowledge using Microsoft suite. Valid state motor vehicle operator's license Knowledge, Skills and Abilities**: The Processing Manager must have the following abilities: Walk, Stand, bend, stretch, climb for up to 12 hours at a time. Possess arm-hand steadiness, manual dexterity, multi-limbed coordination, and physical strength to perform tooling functions. Visually inspect machines/tools, materials, and products to ensure quality and client metrics are met. Must be able to lift a minimum of 50 lbs at a time and greater weight with assistance. Read and comprehend written instructions and ensure instructions are met and achieved upon review of completed product. Must be able to properly record quality related concerns as they arise. Ability to communicate in professional tone and manner in both verbal and written means. Ability to work in a fast-paced environment in a collaborative team setting. Ability to multi-task with a high sense of urgency Must be able to work a rotational schedule and available on weekends. *Sign-On Bonus Criteria Employees hired into the Injection Molding Process Technician position may be eligible for a sign-on bonus based on the following criteria: Must meet all minimum qualifications for the Mechanical Maintenance Technician role at the time of hire. Must successfully complete all onboarding and training requirements. Must maintain acceptable attendance during the bonus eligibility period. Must remain actively employed and in good standing with Edge Plastics through the payout date(s). Bonus will be paid in installments $750 after completing 90 days of employment $750 after completing 6 months of employment Employee must not be on a final written warning for performance, conduct, or attendance at the time of payout. Employees who voluntarily resign or are terminated for cause before the payout forfeit remaining bonus amounts. Bonus applies to Edge Plastics direct hires ONLY. *Edge Plastics Inc. is committed to providing equal opportunity and reasonable accommodations to employees with disabilities. Edge Plastics Inc. complies with the Americans with Disabilities Act and all other applicable federal, state, and local laws regarding disability discrimination and workplace accommodations.

Fort Recovery Industries is looking for a Die Casting Technician on 2nd and 3rd shifts! The schedules for these shifts are 2:30pm - 10:50pm and 10:30pm - 6:50am. A $1.25 shift premium applies to both shifts. Skills Required: Mechanically inclined Complete die cast machine set ups Set up and troubleshoot robotic arm operations Assist entry level operators with technical issues Job Responsibilities: The Die Cast Technician will be responsible for operating and maintaining die casting equipment, ensuring the production of high-quality zinc castings. The technician will also be responsible for operating fork lifts to transport materials and finished products. Additionally, the technician will need to have a strong understanding of electrical systems, as well as experience with pneumatics and hydraulics. Strong communication skills are essential for this role, as the technician will need to work closely with other team members to ensure efficient production processes. What's in it for you? Competitive Hourly Wages Education and Training Advancement Opportunities Weekly Pay! Health, Dental and Vision Insurance Coverage with Low Weekly Premiums Paid Life Insurance and Short Term Disability Coverage 401(k) with 3% Match Perfect Attendance Bonuses Paid Vacation + 10 Paid Holidays/Year Plus SO MANY Opportunities to Grow Your Career into Different Paths and Interest Areas!

Purpose Performs a wide range of basic landscaping, maintenance and resources management activities in along the Olentangy Greenway Trail as part of the Olentangy Reemployment Plan. The Olentangy Reemployment Plan is an 8 week program in partnership with the Columbus Recreation and Parks Department. Example of Duties Performs a variety of landscaping, maintenance and resource management duties including, but not limited to mowing, invasive species removal, trail maintenance, fertilizing, trimming, mulching, etc. Picks up litter and empties trash receptacles. Performs basic trail maintenance including clearing paths, trimming, and pruning using pruners, shovels, rakes, hand saws, hand axes, etc. Operates basic construction equipment including but not limited to power tools, line trimmers, mowers, chain saws, skid steers, etc. Plant, fertilize, prune, water and transplant trees. Assist in the basic construction and repair of decks, signs, tables, roadways, etc. Paints and stains. Qualifications Education/Experience Must be at least 18 years of age. Due to the temporary nature of these roles, local applicants are preferred. Must successfully complete a backround check. Language Skills Ability to communicate effectively and courteously with coworkers and general public on a daily basis. Team-Oriented Works on a team. Good customer service, communications and interpersonal skills. Attendance Being present at work is an essential function of the position. Mathematical Skills Basic mathematics skills; ability to add, subtract, multiply and divide whole numbers, fractions, decimals. Reasoning Ability Ability to carry out instructions and deal with problems involving few variables within a familiar context. Ability to work with a minimum amount of supervision. Physical Demands While performing the duties of this job, the employee is regularly required to walk, talk and hear, operate grounds maintenance and heavy equipment, lift heavy objects, operate power and hand tools, drive off-road vehicles, etc. The employee is frequently required to stand; use hands to fingers, handle, or feel objects, tools, or controls, and reach with hands and arms, etc. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch, or crawl. Work Environment While performing the regular duties of the job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts. The noise level in the work environment is usually moderate. Work Hours Schedule is typically Monday through Friday, 40 hours per week, with some possible Saturday shifts during the 8 week program. Any Additional Information Ability and willingness to cooperate with coworkers on group projects. Ability to complete routine forms. Other Information The above Description represents the essential and most significant duties of this position. It is not intended to exclude other work duties, assignments and responsibilities not mentioned herein. For more information about the Olentangy Reemployment Plan please contact: Joshua J. Simon

**The Best Teams are Created and Maintained Here.** At BrightView, the best teams are created and maintained here. If you are searching for your next fulfilling career, picture yourself on a best-in-class team where you can grow to be your brightest. We're looking for a Snow Tech. Can you picture yourself here? **Here's what you'd do:** Snow Tech you will be responsible for performing all tasks related to snow removal. Shifts are on-call and range from 6 to 12 hours and are often overnight depending on the storm event. May require longer hours for larger storms. The season starts on the first snow fall. **You'd be responsible for:** + Responsible for performing all tasks related to snow removal, including operating ATV plows, snow blowers, snow shovels and e-pokes (salt spreaders). + Work with Sidewalk-Crew Leaders as a team to efficiently and safely complete each assignment **You might be a good fit if you have:** + 18 years of age or older + Work well under pressure while observing safety guidelines with minimal supervision + Have a smart phone (to download and use our attendance tracker App) + Have dependable transportation + You must attend and pass training and a background check + Able to lawfully work in the USA **Here's what to know about working here:** Here at BrightView, we're as passionate about caring for our clients as we are about caring for each other. Though we're the nation's leading landscape company, we maintain a small company feel and supportive environment that makes our team members feel at home. If you're looking to join a team of talented go-getters who tackle big vision projects other companies could only dream of, you just might have found your match. With our range of services, including landscape design, development, maintenance and enhancements, there's no limit to what we can do, and what you can achieve. **Growing Everyday** Like the communities we serve, you are on a constant path of discovery to shape your career and personal development. In addition to best-in-class opportunities and competitive salary, you may be eligible for benefits and perks like: + Paid time off + Health and wellness coverage + 401k savings plan **Start Your Bright New Career Journey** _BrightView is an Equal Employment Opportunity and E-Verify Employer._ **Compensation Pay Range:** Pay Range for this role is $23.00-$25.00 per hour. **_BrightView offers a suite or health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process_** _._ _It's Not Just a Team. It's One BrightView._

Temco Logistics is seeking a dependable and skilled Driver and Appliance Installer to join our team. The ideal candidate will be responsible for operating a 26 ft box truck to deliver and install household appliances to residential and commercial customers. This role requires a blend of driving expertise, physical capability, and technical proficiency to handle installations, provide exceptional customer service, and maintain a safety-first work environment. Qualifications What You'll Do: Operate a 26 ft box truck for local multi-stop delivery routes. Load, deliver, and install household appliances (washers, dryers, refrigerators, dishwashers, ranges, cooktops, etc.). Safely handle equipment using dollies, lifting straps, and handheld tools. Connect basic water lines, valves, and electrical components. Use mobile devices to confirm deliveries and maintain accurate records. Deliver exceptional customer service to homeowners, builders, and clients. Perform pre- and post-trip vehicle inspections and follow all safety protocols. What You Bring: Ability to lift/pull/push/load/unload/move 100+ lbs. using proper equipment. Strong customer service and communication skills. Comfort with GPS navigation and smartphone apps. Experience driving box trucks or delivery vehicles (preferred). Familiarity with appliance installation tools and basic plumbing/electrical (a plus!). Clean driving record and ability to pass background check and DOT physical. Why Temco? Best-in-Class Pay with dense routes - maximize earnings. Paid Training - no experience needed! Uniforms & PPE Provided Medical + FREE Dental & Vision 401(k) with Company Match Paid Time Off & Holidays Career Growth Opportunities - advance into leadership roles. Apply now and become part of a team that's redefining final mile delivery. Temco Logistics is an Equal Employment Opportunity Employer. All qualified applicants are eligible for consideration for employment without regard to disability, veteran status, or any other characteristics protected by law. Bilingual candidates are encouraged to apply. For a full list of the various benefits Temco Logistics offers visit: thd.co/temcobenefits ©2025 Temco Logistics Product Authority, LLC. All rights reserved.

Are you tired of technician or maintenance jobs that don't offer you the career growth you are looking for? Do you want a job that offers more stability than turnaround work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $22.00/hr with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR

The technician is responsible for all aspects of the daily care of the Plains gartersnake and Eastern hellbender collection, under the supervision of head zookeepers. is temporary through June 30, 2026. Responsibilities Prepares and offers diets, performs water changes, cleans enclosures, and maintains equipment. Adheres to biosecurity protocols. Maintains the cleanliness and organization of work areas. Maintains accurate records on animals and equipment, makes animal observations, and collects & records biological data. May participate in field activities. Reports potential issues or concerns promptly to supervisors including, but not limited to, animal health concerns, safety issues, and facility/maintenance problems. The ability to follow written and verbal instructions and pay attention to fine details is essential. Practices good communications skills and has the capacity to work well with others while maintaining the ability to work effectively as an individual. Implements sustainable practices in daily tasks whenever possible. Ability to plan and organize work in an efficient and cost‐effective manner and without direct supervision required. Constantly strives to further the mission of the organization and avidly supports the Columbus Zoo and Aquarium, Zoombezi Bay, Safari Golf Club and The Wilds. Performs other duties as assigned. Qualifications Experience Experience in the handling and care of snakes required. Experience in the care of aquatic animals required. Experience in maintaining aquariums and aquatic life support equipment required. Experience using analytical software and programs such as Excel, ImageJ, and ZIMS preferred. Education B.S. degree in biological sciences, natural resources, animal science, or related field preferred. Applicants must have a working knowledge of natural history, biology, animal husbandry, and conservation issues as they apply to reptiles & amphibians specifically and Ohio wildlife in general. Physical Demands Must be able to lift and carry up to 50 lbs and work in inclement weather Schedule Ability to work a flexible schedule including weekends and holidays. Approximately 40 hours per week.

Join a global leader in private aviation, offering access to an ultramodern fleet of private aircraft through fractional ownership, leasing and jet cards. Together, our employees in North America and Europe work to provide Flexjet aircraft Owners with the finest experience in premium private jet travel. Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an Interior Install Technician to join our team! Please note, this position may require working nights. This position is located in Cleveland, Ohio. DUTIES & RESPONSIBILITIES * Safely perform removal, installation, and/or fabrication of aircraft interiors (which may include seats, carpets, galleys, closets, lavatories, side ledges, bulkheads, doors and panels) * Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, signoffs and quality specifications * Install cabin and cockpit seats and furniture * Fabricates and pre-fit interior components associated with the modification specs and does simple layout on such items as O2 boxes, brackets, clips, lights and gaspers etc. * Seeks methods to cross train to develop technical skills and business knowledge. * Removes and installs all interior components and soundproofing materials to meet company quality standards * Reads and interprets blueprints, drawings, and production procedures to determine measurements and installation procedures * Measures and marks installation areas in aircraft interior, using measuring and marking instruments and templates * Fits and installs items in aircraft using hand tools, power tools, and fasteners, such as screws, rivets, bolts, and speed nuts * Fabricates and installs supporting structural devices such as clips, brackets, angles, gussets, and doublers, using shop equipment * Tests functional performance of installed items * Performs other duties as required EDUCATION & EXPERIENCE * Experience in aerospace industry highly desired * High school diploma or GED * Able to distinguish alignment on intricate parts * Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from composite honeycomb, fiberglass, Lexan, acrylic materials, etc. * Must possess required tools and toolbox * Basic computer skills * Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework. Must be able to climb in and out of aircraft and perform work in tight or confined places and positions * Requires excellent communication skills * Ability to work in a team environment * Must be flexible with shift work REQUIRED SKILLS * Successful candidate will be highly motivated and work effectively under pressure and time constraints * Must have the ability to multi-task within a team environment * Strong working knowledge of Windows and MS Office programs * Possess proven inspection competencies * Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude * Specialized aircraft tooling will be furnished by the company * Ability to pass background check for airport security badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Flexjet is an equal-opportunity employer. We aim to choose individuals who have the highest integrity; those who personify genuine concern for customers and fellow employees alike. More than anything, we look for individuals who grasp the importance of trust in an employer/employee relationship.

BFC Solutions, the nation's leader in HVAC preventative maintenance is growing again! We are hiring a Accounts for our Filter Service Department as a Full-time employee in our market. Starting pay for the Service Technician role will be up to $22.00/hour, depending on experience and qualifications for our Toledo OH location. We offer the following benefits: 401(k) with employer matching Excellent advancement opportunities Company provided cell phone. Company vehicle Dental insurance Health insurance Vision insurance 8 paid holidays Paid time off As a Service Technician with Bonded Filter, you will install air filters and perform coil cleaning primarily in rooftop air ventilation and HVAC systems for retail and commercial businesses. Bonded Filter Company specializes in preventative maintenance and provides air quality solutions for some of the most recognized retail and commercial brands in America. Service Technician Job Requirements: FREQUENT overnight/out of town travel. For insurance purposes, to operate the company vehicle, you must be at least 21 years of age. Possess and maintain a valid Driver's License subject to continuous review. Must be comfortable with and confident working at heights up-to 40 feet above ground level and using extension ladders. Meet ladder safety requirements as defined by OSHA. Weigh less than 275 lbs due to ladder weight restriction limit Must be comfortable working outside in all weather conditions. Integrity - must act with integrity at all times. Must demonstrate a superior Customer Service attitude. Be comfortable using the Customer's & Company technology platform. Work independently with remote supervision & the Field Support Team. A typical work week will require 45 - 50 hours. Must be able to lift and carry up-to 75 pounds repeatedly. Service Technician Preferred Experience: Facility and/or grounds maintenance Construction HVAC Cable installation Route delivery and set-up As a Service Technician with Bonded Filter, we make sure to put our technicians first. We offer comprehensive benefits, pay advancement, and bonus opportunities. We give our Technicians the tools to be successful: 2 weeks of paid training, a company van, tools, uniforms, materials, as well as 24-hour support. This position offers stable year-round employment with a growing industry leader in Air Filtration Service. As an employee, you can feel confident that your health and well-being are among our highest priorities. We offer a competitive salary and benefits plan that includes-Medical, Dental, Vision, Prescription Drug, Life Insurance, 401K Savings Plan, and Paid Time Off (PTO). BFC Solutions is an Equal Opportunity Employer #IND123

Job Description Looking for Technician's All Classes of Technician's (A) Technician, (B), Technician, (C) Technician, and Entry-Level Express Technician 5 Day work week, Pay based on experience level. Requirements/Qualifications: Prior Infiniti, Nissan, and/or other relevant major manufacturer automotive experience 3 years (preferred) but not required. ASE and/or manufacturer certification, required for A & B class Technicians. C level Technician and Entry-Level Express Technician Welcome. A real team player who is focused on providing exemplary client services. Ability to multi-task in a fast paced work environment. Strong organizational skills and detail oriented. Be at 18 years of age. Operate a wide variety of cars, light trucks, and vans, with ability to drive both manual and automatic transmissions. Clean driving record. Drug free work place. Work Conditions/Responsibilities: As an "A" Class Automotive Technician you will perform vehicle repair and maintenance as assigned in accordance with dealer and factory standards: Diagnose and repair vehicle automotive systems including engine, steering, suspension, brakes, and air conditioning to required specifications. Preform vehicle inspection to identify necessary repairs. Provide labor and time estimates for all repair work. Inspect and test vehicles to determine necessary and applicable repair work. Complete necessary paperwork and documentation for service repairs. Participate in on-going company and manufacturing training, and education programs, to stay current and abreast of changing technology. Provide and maintain a basic inventory of required hand tools. Benefits: Closed Sundays / 5 day work week Paid vacations 401(K) Dental Insurance Vision Insurance Medical Insurance Employee Discount Flexible Schedule Work Location: One location and in person.

at Ayr Wellness AYR Wellness is a publicly traded, multi-state cannabis company with more than 85 dispensaries. We are one of the largest scale producers of high-quality cannabis in the U.S., and our purpose is to be a force for good. People are at the heart of everything we do, and we are passionate about bringing progress and positive changes to our communities, our industry, and our world. Our talented and reliable team members are the foundation of our business and investing in exceptional talent is paramount to our success. The key to building a culture where everyone can thrive starts and ends with our teams. Their collective courage and kyndness sets AYR apart. Your career growth at AYR is limitless, and we believe in creating an environment where everyone can flourish and win together. Job Summary Our Cultivation Technician positions are responsible for executing cultivation plans in keeping with the Company's operating procedures for indoor and outdoor cultivation. Technicians conduct the day-to-day assignments and tasks of the cannabis production cycle. Cultivation: Cloning, cutting, and transplanting; watering; labeling; and inventory data input. Plant care during vegetative and flowering phase: trimming, manipulating, and staking; big leafing and pruning; watering; plant monitoring; inventory data input. Harvesting: Cutting plants; weighing and inventory data input into the electronic inventory tracking system. Operating and maintaining cultivation systems/equipment; stocking and handling production inputs and supplies; sanitizing and cleaning growing rooms, cultivation workspaces and tools. Duties and Responsibilities Cloning: cutting, rooting, and transplanting; clone care, watering and feeding; clone monitoring and climate control; labeling; and inventory data input into state mandated electronic tracking system. Monitors growing conditions and reviews changes in humidity, moisture and temperature and cultivation procedures to ensure conformance with quality control standards. Inspects crop to ascertain conditions such as leaf texture, bloom size and the existence of pests or disease; removing substandard or diseased plants to maintain quality standards. Plant monitoring and care during vegetative and flowering phase: trimming and staking; big leafing and pruning; plant care, watering and feeding; plant monitoring and climate control; pest and disease control; inventory data input. Harvesting: cutting plants; trimming cut plants; removing flowering tops; weighing and inventory data input into the electronic inventory tracking system. Curing: hanging and dry-racking flowers; monitoring curing process and climate control; labeling; weighing and inventory data input. Operating and maintaining cultivation systems/equipment: monitoring, calibrating, running, and maintaining lighting, irrigation, climate control and other cultivation systems; stocking and handling production inputs and supplies; sanitizing and cleaning growing areas, cultivation workspaces and tools. Ensure daily compliance with policies and procedures including but not limited to, state compliance, security protocols, and access protocols. Other duties as required or needed to assist the company in meeting goals. Qualifications Excellent communication skills Strong work ethic, reliable, flexible Commitment to producing highest quality work Ability to work in a demanding, fast-paced environment, including flexible and/or extended hours as needed Education High school diploma/GED preferred Experience Experience in the cannabis or agricultural industry not required, but preferred Competencies (Knowledge, Skills, and Attitude) Adaptable / Flexible - Effectively manages change and adjusts comfortably to new people and processes; multi-tasks and handles ambiguity and stress well while remaining positive; bounces back quickly from challenging situations; asks for help when needed and stays focused on being a force for good. Direct reports No direct reports Working conditions The person in this position may be exposed to dust, kief, cleaning chemicals and fumes. Although systems are in place to remove these byproducts, there is still exposure to some degree. Frequently works in rooms with bright light where eye protection is required. Frequently works in rooms with moderate heat and humidity. The person in this position is constantly exposed to moderate background noise due to environmental systems, equipment and fans. Physical requirements Prolonged sitting, standing and / or walking motion/movement will be required throughout the shift. Constant movement of hands/fingers and limbs; this position requires good manual dexterity, coordination and stamina. Frequently ascends/descends a ladder to inspect/maintain plants. Occasionally operates power hand tools and other cultivation machinery. Must be able to inspect and detect quality deviations and defects. Occasional lifting, positioning or moving items up to 50 pounds. AYR Wellness is an equal opportunity employer. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, genetic information, marital status, military or veteran status, or any other protected status in accordance with applicable federal, state, and local laws.

Ensure client safety and maintaining the integrity of the residential program. This includes monitoring clients, assisting with daily living tasks, facilitating recreational activities, and completing required documentation. The role plays a key part in fostering a supportive and positive residential environment that encourages client growth and achievement of treatment goals. Primary Responsibilities: Monitoring consumers with Severe and Persistent Mental Illness (SPMI) Ensure client safety and program integrity for a secure environment. Assist with daily living tasks Recreational activities Clinical/facility documentation. Benefits: Licensure reimbursement Clinical supervision hours towards independent licensure Career advancement opportunities Professional development and paid CEUs Additional compensation for advanced licensure Health, dental, and vision insurance 401k retirement options with company match as of day one Generous paid leave options 11 paid holidays Flexible or work-from-home options Casual Friday-Sunday dress code Quarterly Bonus Work Location and Standard Work Hours: Xenia OH Full-time Some evenings and weekends may be required Shifts may vary. Supervisory Responsibilities: None. Supervisory Responsibilities: None Work Environment: This job operates in a residential home. You're passionate, purpose-driven, and you envision a community of healthy and productive individuals. You care about improving lives by providing clinically excellent and accessible behavioral health services. Join us on our mission and come be a part of our positive company culture filled with diverse talent, clinical excellence, and dedication to supporting the needs of our communities. Qualifications Required Education, Certifications, and/or Experience High School Diploma Preferred Education Certifications, and/or Experience Experience with Severe and Persistent Mentally Ill (SPMI) clients in a residential setting is a plus. Computer Experience CPR/First Aid Certifications, De-escalation - TCN will provide upon hire

For 75 years, Charles River employees have worked together to assist in the discovery, development and safe manufacture of new drug therapies. When you join our family, you will have a significant impact on the health and well-being of people across the globe. Whether your background is in life sciences, finance, IT, sales or another area, your skills will play an important role in the work we perform. In return, we'll help you build a career that you can feel passionate about. Job Summary We are seeking a Technician I for our Necropsy team at our Safety Assessment site located in Ashland, Ohio. Candidate will be working 4/10's either Monday-Thursday or Tuesday-Friday 8a-630pm, weekend rotation, holiday rotation and overtime are required for this role. A Technician I is in training to perform and become proficient in on-boarding skills, procedures, and cooperating in a team environment. The technician is learning basic skills required to conduct a study, which may include animal handling, euthanasia, and sedation; animal procedures including dissection; collection of samples and weights; laboratory preparation, set up and cleaning; preparation of laboratory solutions. The technician is working under close supervision to gain proficiency. Essential Duties and Responsibilities: (The fundamental Competencies/Skills & Responsibilities of the role (products and services provided/results accomplished) include, but are not limited to, those listed: Ensure good welfare and humane care for all animals worked with through gentle, positive human-animal interactions Train in on-boarding skills which may include animal handling, euthanasia, and sedation; animal procedures including dissection; collection of samples and weights; laboratory preparation, set up and cleaning; preparation of laboratory solutions. Specific skills will be based on each area's training plan and business needs. Prosect and perform functions in a time frame set by training group for core skill completion. Collect, document, review, and verify data on forms, or in electronic data capture systems. Review documentation of functions performed as part of quality control requirements. Use and maintain instrumentation and equipment. Learn and know anatomic terms Receive, track, and prepare samples or materials, as required for department. Perform all other related duties as assigned. The pay for this position is $19/hr. Please note that salaries vary within the range based on factors including, but not limited to, experience, skills, education, certifications, and location Qualifications (Knowledge, Experience, Skills and Abilities required to accomplish the essential functions) include but are not limited to: Education: High school diploma or General Education Degree (G.E.D.) preferred. Experience: No previous experience required. An equivalent combination of education and experience may be accepted as a satisfactory substitute for the specific education and experience listed above. Certification/Licensure: None, unless required by local government. Excellent written and verbal communication skills. Ability to manage multiple tasks and priorities to achieve goals. Computer skills (e.g., Microsoft Office Suite), commensurate with essential functions, including the ability to learn a validated system. Ability to ensure that a safe working environment is maintained by observing all safety procedures and working methods by making proper use of protective clothing and equipment, and by reading, understanding, and following all safety documents issued or notified of. Ability to ensure the integrity of the studies and fulfill the regulatory agencies requirements by performing the activities according to the Good Laboratory Practices (GLP), Standard Operating Procedures (SOP), Business Operating Procedures (BOP) and the Institutional Animal Care and Use Committee (IACUC) rules. Ability to work extended hours beyond normal work schedule to include, but not limited to evenings, weekends, extended shifts, and/or extra shifts, sometimes on short notice. Ability to work under specific time constraints. Must be authorized to work in United States without a sponsor visa now or in the future. Physical Demands Employees must be able to lift, move, manipulate, and/or hold heavy objects up to and including 50 pounds; this includes work materials, equipment, and/or animals. Must be able to perform laboratory procedures, which require, talking, hearing, standing, or sitting for long periods of time, entering data into a computer, using appropriate instruments, reaching with hands and arms, working in narrow spaces, and wearing safety equipment (PPE) according to OSHA regulations and company standards. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Work Environment Works in a research laboratory environment, which requires use of sharp objects, working around mechanical parts, working with or near known or unknown toxic or caustic chemicals and/or biological hazards, exposure to fumes and airborne particles, working at noise levels ranging from quiet to moderately noisy. Comments May occasionally work weekend/holidays and/or rotating on-call schedule. About Safety Assessment Charles River is committed to helping our partners expedite their preclinical drug development with exceptional safety assessment services, state-of-the-art facilities and expert regulatory guidance. From individual specialty toxicology and IND enabling studies to tailored packages and total laboratory support, our deeply experienced team can design and execute programs that anticipate challenges and avoid roadblocks for a smooth, efficient journey to market. Each year approximately 300 investigational new drug (IND) programs are conducted in our Safety Assessment facilities. About Charles River Charles River is an early-stage contract research organization (CRO). We have built upon our foundation of laboratory animal medicine and science to develop a diverse portfolio of discovery and safety assessment services, both Good Laboratory Practice (GLP) and non-GLP, to support clients from target identification through preclinical development. Charles River also provides a suite of products and services to support our clients' clinical laboratory testing needs and manufacturing activities. Utilizing this broad portfolio of products and services enables our clients to create a more flexible drug development model, which reduces their costs, enhances their productivity and effectiveness to increase speed to market. With over 20,000 employees within 110 facilities in over 20 countries around the globe, we are strategically positioned to coordinate worldwide resources and apply multidisciplinary perspectives in resolving our client's unique challenges. Our client base includes global pharmaceutical companies, biotechnology companies, government agencies and hospitals and academic institutions around the world. At Charles River, we are passionate about our role in improving the quality of people's lives. Our mission, our excellent science and our strong sense of purpose guide us in all that we do, and we approach each day with the knowledge that our work helps to improve the health and well-being of many across the globe. We have proudly supported the development of 86% of the drugs approved by the FDA in 2021. Equal Employment Opportunity Charles River Laboratories is an Equal Opportunity Employer - all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. If you are interested in applying to Charles River Laboratories and need special assistance or an accommodation due to a disability to complete any forms or to otherwise participate in the resume submission process, please contact a member of our Human Resources team by sending an e-mail message to crrecruitment_**********. This contact is for accommodation requests for individuals with disabilities only and cannot be used to inquire about the status of applications. For more information, please visit ***************

FRX Ohio is currently seeking a Cultivation Tech to join the team at the GP! Summary of the Role: Cultivation Technicians provide all essential plant care functions within the Cultivation Department under the guidance and supervision of the Cultivation Department management team, in accordance with Cultivation Department SOPs. Cultivation Technicians will be assigned to a specific team that operates multiple cultivation rooms under the direct supervision of a Cultivation Team Lead/Supervisor. It's essential that Cultivation Techs protect the garden by performing tasks as assigned. Key Responsibilities: Performing plant care tasks and facility maintenance as directed by Team Lead and Director of Cultivation, including watering, measuring nutrients, pruning, destroying waste, and keeping records. Keeping clothing and tools clean and well-organized Contributing to a healthy and compliant atmosphere in the Cultivation Department Feeding and watering plants according to the feeding schedules identified by the Cultivation and Post Harvest Manager and the Cultivation and Post Harvest Supervisor. Pruning, weighing/destroying/recording waste, cleaning cultivation areas, cloning and planting, and caring for living soil beds. Other duties as assigned Qualifications: High School Diploma or GED preferred. Experience in any relevant trades, including horticulture, food handling, etc. Must be at least 21 years of age to work within the OH MMCP Ability to pass a criminal background check. Attention to detail and a quick eye Ability to sit for 8 hours per day Physical and Environmental Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to work up to 10 hours a day and rotating shifts Ability to bend/stoop/kneel/reach up to 90% of the workday Ability to climb a ladder Flexible schedule availability including nights, weekends and holidays Ability to lift, push, and pull 75 pounds Ability to sit, squat, bend, and kneel repetitively throughout a workday Ability to stand for extended periods of time Extended computer usage Comfortable being under constant video surveillance Work environments that include exposure to, but not limited to fumes, dust, odors, heights, indoor AC, no AC, motion, and noise. Management reserves the right to assign other job duties as necessary, with or without notice. Please note this job description is not designed to cover a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Diversity and Inclusion: We are an equal opportunity employer that does not discriminate based on race, creed, color, national origin, ancestry, age, marital status, sexual orientation, genetic information, pregnancy, sex, gender identity or expression, disability, or because of the liability for service in the armed forces of the United States or the nationality of any individual, or any other characteristic protected by applicable federal, state, or local laws.