Computer aided design designer jobs in Fort Wayne, IN

in Fort Wayne, IN. Gains knowledge of standards, codes, and regulations relevant to area of assignment. Gains knowledge with pertinent equipment, material, systems, and business processes. Assists employees in handling defined portions of routine problems Possesses basic computer literacy, knowledge, and skills. Performs work activities as assigned and coached by higher level employees. Demonstrates ability to work with others in supplying information and seeking assistance as necessary. Prioritizes routine work to meet the demands of the company. Maintains accurate records. Applies technical knowledge and experience in resolving problems encountered in assigned work. Uses initiative in looking for opportunities to improve the process and increase job knowledge/technical skills. Seeks out, compiles, analyzes, and interprets information necessary to perform work activities and solve problems. Communicates effectively, both orally and in writing with internal and external customers. Assists in the preparation of technical reports and papers. Minimum Requirements: Minimum high school diploma or equivalent plus 2 years or related utility industry work experience; or an Associate's Degree in Electrical/Electronic/Civil/ Mechanical Engineering Technology or related fields.

CAD Tooling Designer (Direct Hire) - Decatur, INPay: $30.00-$33.00/hr (up to $35.50/hr for a well-experienced CAD Designer) Schedule: Full-time, on-site (Mon-Thu 7:00a-4:30p; Fri 7:00a-11:00a) Employment Type: Direct Hire through Pro Resources Benefits: Full benefits package About the RoleJoin a growing manufacturing team as a CAD Tooling Designer. You'll build accurate, fully-parametric 3D models and assemblies, create BOMs and work instructions, and collaborate with production and engineering to deliver high-quality tooling on time. What You'll Do Create 3D models from customer specs and prints Build fully parametric tooling assemblies in Cimatron (or comparable CAD) Generate clear BOMs and work instructions for manufacturing Partner with production/engineering to troubleshoot and improve designs Communicate professionally with internal teams and customers to meet deadlines What You'll Bring 3D CAD design experience (Cimatron strongly preferred; equivalents welcome) Understanding of foundry tooling/manufacturing processes Strong organization, time management, and communication skills Ability to lift up to 50 lbs as needed Journeyman Patternmaker not required-it's a plus if you have it Why You'll Love It Competitive pay with top end up to $35.50/hr for well-experienced designers Full benefits (direct hire) Consistent daytime schedule and supportive team environment Opportunity to make a real impact on product quality and on-time delivery Work Setting On-site in Decatur, IN Office/design environment with regular collaboration on the shop floor Minimal travel APPY TODAY! Take the next step in your CAD career with Pro Resources! #clerical

New Millennium is committed to hiring enthusiastic, dedicated, hardworking, team-oriented individuals who are willing to learn and enjoy working in a challenging, fast paced, dynamic environment regardless of your experience level. We are excited to train the right team members and will provide what you need to enable you to succeed. New Millennium offers flexible hours, competitive pay, paid vacations up to 4 weeks per year based on length of service, quarterly bonuses, annual profit sharing, annual stock awards, 401k with up to 50% matching, dependent scholarships, employee education assistance, full medical, dental and vision insurance and more. In addition to that, our culture and work environment is very collaborative, highly technical, and extremely rewarding. New Millennium is part of Steel Dynamics, Inc., one of the largest steel producers in the country with locations throughout the US. As such, we also offer countless opportunities for advancement throughout all divisions of SDI. A New Millennium trained detailer is a high-value candidate for advancement and relocation due to their in-depth knowledge of a wide range of our daily operations. Responsibilities Review structural contract drawings and specifications for non-residential building projects. Interpret the loading diagrams (uplift, snow drift, ponding, etc.) with the assistance of our internal Project Managers and Engineers and apply those load requirements to the steel joists and girders. Analyze connections of steel joists and girders to the supporting members (beams, columns, walls, etc.) Identify special connections that may be required. Coordinate with other trades including structural steel fabricators, precast suppliers, fire protection, HVAC designers, athletic equipment suppliers (basketball goals, etc.) to incorporate the needs of those trades into the joist/girder designs. Identify and apply special joist and girder profile properties (single/double pitch, bowstring/barrel, etc.) Create Joist/Girder/Deck placement plans, sections, and details to reflect New Millennium's interpretation of the contract drawings for the Structural Engineer of Record to review/approve and for the ironworkers who will be erecting the structure, so they know where to install and how to attach our materials in the building. Create Bills of Material for all joists, girders and deck that import into our design program, which then designs and generates shop orders for all joists, girders, deck, bridging, etc. Coordinate with our customers, erectors, GC's and Architect/Engineer of Record to ensure that our products are designed, fabricated, and delivered to the jobsite with the highest quality and on schedule. Other duties as necessary Qualifications An ideal candidate would have experience in one or more of the following: Joist/girder/deck or structural steel detailing Structural design/drafting/modelling Working on projects from concept to production Problem solving or quality assurance 2D or 3D cad software Education in civil or mechanical engineering, construction management, design engineering, architectural engineering, etc. Reading and interpreting drawings, sections, specifications and other construction related documents Steel Dynamics, Inc., and all affiliated entities are equal opportunity employers. Coming Soon!!

Are you ready to take your design career to the next level by learning under the guidance and mentorship of a senior designer? Does the opportunity to directly impact the success of an industry leader excite you? If you are a highly organized, diligent, and team-focused individual who seeks career growth, our Project Designer role may be just what you are looking for. Headquartered in Ft. Wayne, IN, Tippmann Group is a privately held holding company for Tippmann Construction, Tippmann Properties, and Interstate Warehousing. Our companies are recognized as national leaders in refrigerated construction, distribution, and warehousing solutions, as well as property management. Following Tippmann's Plan for Success, designers who are new to our company receive the training and support needed to sharpen their skills and grow in the cold storage design space. Under the guidance of a Senior Designer, Tippmann Construction Project Designers work to create designs / drawings to support internal and external stakeholders during the sales cycle and the construction process. While design creation is the primary role, the Project Designer will be mentored by a Senior Designer to gain an understanding of project design needs, developing site and facility solutions, drafting options, scope definition, assisting third party-engineers with project planning and cost estimations, and presenting the options to Tippmann Leadership and customers. Core Responsibilities: • Utilize CAD and Bluebeam to develop detailed site and facility designs • Assist in the modification of design options and drive resolution on open design elements and issues • Gain exposure to government officials, local utilities, and additional 3rd parties to understand outside impacts to facility and site designs • Clearly define project scope and develop high level construction project plans corresponding to design options • Assist Estimating in developing project costs, including optional designs, alternates, and allowances • Support the Tippmann and Customer Project Management teams throughout the construction process Education: • Minimum of an associate degree in a science, technology, engineering, or math (STEM) related major Skills and Capabilities: • Hands-on use and knowledge of AutoCAD • Basic understanding and experience with 3D Modeling and BIM concepts • Proven capability to learn quickly and problem solve in multi-solution and ambiguous situations • Strong internal and external communication and presentation skills • Track record of positive job performance, attention to detail and results-oriented experience • Self-starter, highly motivated to learn and grow in the design profession. • Proficiency with the MS Office suite of products • Understanding of industrial facility and site design including architectural, mechanical, civil, structural, electrical, plumbing, fire protection, and equipment layout a plus. • Experience within the Food Processing and Distribution industry preferred Other Position based at the Tippmann Group Corporate office in Ft. Wayne, Indiana Limited travel is required. Benefits Highly competitive salary Quarterly bonus program Company laptop and iPhone Seven paid holidays Paid vacation time Medical, dental, and vision insurance coverage Short- and long-term disability as well as life insurance 401k plan with company match

Job Description •Ensure that all customer's requested options are developed meeting industry expectations. •Able to take projects from inception to completion utilizing sound reasoning and SolidWorks engineering software. •Create Bill of Materials (BOM) •Participate in design reviews as required. •Review the processing of order bids, Orders, Engineering Change Notices and Change orders as needed as required. •Interact with ARBOC Specialty Vehicles employees on a regular basis • Interact with outside suppliers to obtain part &equipment related data. •Complete product floorplan development using Solid Works and Conduct weight analysis as needed. •Be tenacious in pursuit of excellence in our products. Requirements High school diploma or GED Engineering Technology (A.A.S. Degree) 2 years of automotive/bus industry or college equivalency Experience in working with multiple discipline projects andclients simultaneously Capable and experienced in managing and performing projectsin a fast-paced environment This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. Must be able to lift and/or move items over 25 pounds. Equipment / Machines Used: CNC Plasma Table 3D Printer Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability

Forest River, Inc., the Nation's largest manufacturer of Recreational Vehicles, Cargo Trailers, Transit Buses and Boats has an immediate opening. Responsibilities * Use individual wheel scale equipment, level and tape measure * Multitask by handling diverse assignments concurrently * Ability to work well with others, exhibiting teamwork skills * Able to take direction and finish task in a timely manner * Possesses mechanical aptitude with ability to complete basic mathematical calculations * Able to understand drafting techniques and familiarity with engineering terminology Qualifications * Basic skills in MS Word, Excel, Outlook and PowerPoint * Must have a good working knowledge of AutoCAD and Inventor * A working understanding of ANSI 119.2, ANSI 119.5 and Z240 code requirements * Working knowledge of weight references as they pertain to Federal requirements of Certification labels and Tire Information Labels Forest River offers a stable work environment that is fast paced. Our employees enjoy a highly competitive Wage and Benefit Package. We are looking for dedicated individuals with experience in the Industry as well as other Manufacturing Processes.

Summary: Responsible for the full engineering cycle of the products assigned. Essential Duties and Responsibilities - Include the following (other duties may be assigned): Design and create solid models and drawings that allow the production of complex components required for the production of company products. Design activities include component & assembly design of both new and existing products; fixtures for machining and assembly; and specification of required textures and surface coatings, including those that are applied through outside operations. Develop new product components using alternate materials and secondary operations to allow the attainment of prescribed physical properties and application characteristics. Identifies and develops method/source for obtaining the alternate material or secondary operation. Understands and utilize sound project management skills to produce prototypes, complete initial testing, and finalize design allowing the component to be manufactured. Creates a complete set of documentation allowing the creation of a costed Bill of Materials. Documentation typically includes: A parts list, with appropriate part numbers assigned to allow indication of components, component parts and assemblies as they move through the manufacturing process Drawings and associated PDF files that show critical dimensions and tolerances. Dimensions and tolerances are defined and created using generally accepted principles such as GDT. All drawings necessary for production operations. All production drawings such as machining and assembly drawings are appropriately configured for the operation that will use them. Applies all rules, regulations, and guidelines to allow products to meet the requirements of licensing and approval bodies such as UL (Underwriter's Laboratories), OIML (International Organization of Legal Metrology), CE marking, ABS (American Bureau of Shipbuilding), etc. Supports manufacturing by clarifying dimensions and fit, resolving tolerance problems, and describing methods for assembly. Supporting knowledge for this activity includes complete understanding of accessories, how they function, and how they are attached to the product being manufactured. Design modifications of existing products to overcome a manufacturing obstacle or to achieve additional component functionality. Completes the necessary documentation for manufacturability using a variety of company and regulatory standards. Researches and obtains answers to a variety of questions and problems. Questions and problem solutions may result from troubleshooting production issues, design problems, quality issues, or other internal departments. Creation of solutions and answers may require complex thought and extensive research of reference materials and subject matter experts outside of the TCS/Murray Equipment organization. Maintains a “can-do” service attitude in keeping with the vision, goals and key performance indicators set by executive management. Employs independent thought processes to set priorities, undertake activities, and solve problems. Required Skills & Abilities: Experienced with the design and use of mechanical systems, especially fluid handling systems including pumps, meters, valves, electric motors, and plumbing components. Computer Literacy (Proficient in Microsoft office, especially PowerPoint, Excel, and Word). Proficient in Solid Works or similar 3-D solid modeling design and drafting program. Experienced with mechanical hand and power tools in a shop environment. Familiar with a variety of measuring equipment. (Height Gauges, Metallurgy Testing, Micrometers, Profilometers, Thread Gauges, Calipers, and other Gauges). Project Management Analyze data using Excel Coordinate Measuring Machines Customer Service Filing Hardness Testing Math Aptitude, 12th grade Oral Communication Skills Organization Planning Professionalism Reading Skills, 12th grade Technical Communication Written Communication Skills Education and Experience: Four-year Engineering Degree or 8 years' experience in a design engineering position. Advanced use of SolidWorks design applications to produce complex models and associated drawings and data tables. Understanding of use of ERP systems for Bill of Material creation and maintenance Understanding of programming requirements for multi-axis computer-controlled machine centers. Understanding of use of search terms and research methods for finding information. Capable of understanding TCS and Murray Equipment products and accessory operation and terminology in a minimum amount of time. Communication Routinely communicates with production operators; machinists; other technical staff; sales and executive staff using both written and spoken English. Does not direct any other staff - must routinely advise other staff regarding product design and manufacturing methods and instructions. Physical Requirements: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lifting up to 50 pounds occasionally. Sitting for long periods of time. Desk work with continuous use of telephones, computers and other office equipment. Use of oral and written communication Routinely responds to questions/problems on the production floor - these activities may require up to 2-3 hours in the production setting.

We are a technology-led healthcare solutions provider. We are driven by our purpose to enable healthcare organizations to be future-ready. We offer accelerated, global growth opportunities for talent that's bold, industrious, and nimble. With Indegene, you gain a unique career experience that celebrates entrepreneurship and is guided by passion, innovation, collaboration, and empathy. To explore exciting opportunities at the convergence of healthcare and technology, check out ************************ Looking to jump-start your career? We understand how important the first few years of your career are, which create the foundation of your entire professional journey. At Indegene, we promise you a differentiated career experience. You will not only work at the exciting intersection of healthcare and technology but also will be mentored by some of the most brilliant minds in the industry. We are offering a global fast-track career where you can grow along with Indegene's high-speed growth. We are purpose-driven. We enable healthcare organizations to be future ready and our customer obsession is our driving force. We ensure that our customers achieve what they truly want. We are bold in our actions, nimble in our decision-making, and industrious in the way we work Role: Manager, Solutions Design & Architecture Description: You will be responsible to Responsibilities: * Strategize, lead, and design functional and technical solution development for new business acquisition activities related to Indegene's commercial solutions spectrum, including omnichannel, content factory, web factory, CX and data-oriented solutions * Demonstrate thought leadership, solution innovation, and architecture design for RFPs and other client engagement avenues. * Evaluate client requirements in collaboration with internal SMEs/tech experts, aligning them with Indegene's service propositions, operating model designs, effort estimations, SLA definitions, etc. * Develop compelling sales narratives, value proposition document, business cases and CXO/CXO-1 level discussion material, with an ability to drive client facing discussions * Define solution models and budget creation for consulting, current engagement scale-up, new technology implementation, legacy portfolio modernization across MarTech stack * Conduct discovery sessions with customers to shape opportunities and contribute to the overall pipeline development. * Architect pricing models, construct solutions, and orchestrate alignment between clients and internal stakeholders. * Drive end-to-end bid management for large deals, author proposal responses, and actively lead proposal defence discussions, pricing negotiations, and SOW closures. * Global markets coverage and mandate to drive growth across key and new accounts portfolio, working closely with sales and delivery leadership * Lead ideation sessions with internal leadership teams to identify innovative win themes and value propositions during proposal development. * Articulate Indegene's value proposition to clients through written proposals and live presentations. * Strategically align Indegene's tech offerings with emerging trends, including GenAI-driven solutions and digital transformation initiatives. * Navigate complex decision-making among a large set of cross-functional stakeholders (both internal and client side) Must Have * MBA graduate with overall 10+ years' experience in marketing and CX oriented solutions selling * Prior experience in managing complex solution development for integrated and large deals * Proven experience in MarTech, omnichannel, web factory and large scale centralization projects * Experienced in owning pricing estimations, client discovery discussions and solution architecture * Hands-on experience in bid management, solution design, client presentations and legal agreements (SOWs) * Prior experience in creating new solutions, POVs and industry benchmarking collateral related to technology areas * Excellent communication and client management skills, with the ability to clearly articulate value propositions. * Ability to collaborate effectively with internal and external stakeholders to drive consensus and deliver tailored solutions. * Exposure/understanding of pharma ecosystem will be preferred. * Skills: Excellent communication and presentation skills, along with an analytical and problem-solving mindset. Good to have EQUAL OPPORTUNITY Indegene is proud to be an Equal Employment Employer and is committed to the culture of Inclusion and Diversity. We do not discriminate on the basis of race, religion, sex, colour, age, national origin, pregnancy, sexual orientation, physical ability, or any other characteristics. All employment decisions, from hiring to separation, will be based on business requirements, the candidate's merit and qualification. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, national origin, gender identity, sexual orientation, disability status, protected veteran status, or any other characteristics.

COMMERCIAL CONTRACTING CORPORATION OUR MISSION: TO IDENTIFY, HIRE AND RETAIN THE VERY BEST PEOPLE. OUR CORE VALUES KEEP PEOPLE SAFE: We must strive to protect our most valuable asset each and every day. INTEGRITY: We're one team made up of people who are dependable and act with integrity. HUMILITY: We are humble team players who prioritize the mission over personal ego. DRIVE: Our people are passionate about their work, relationships, and success. LOYALTY: We are dedicated to achieving the mission of each project and the overall company. ATTITUDE: We will inspire others to be positive and overcome daily challenges to achieve our mission. CCC was awarded the Top Workplaces USA Award for 2022, 2023, 2024, 2025 and earned the Top Workplaces Regional Awards from the Detroit Free Press from 2017 - 2024. We are proud to offer a very competitive wage and benefit compensation package that includes medical, dental, vision, disability, vacation pay, holiday pay, personal time, employee stock ownership program (ESOP), and a generous 401K program. JOB DESCRIPTION POSITION: DESIGNER/DETAILER (Structural and Misc. Steel) LOCATION: Gas City, IN OBJECTIVE The Designer/Detailer (Structural and Misc. Steel) plays a crucial role in translating the design intent into detailed, accurate drawings and models that guide the fabrication, erection, and construction of steel structures. The role is responsible for blending technical expertise with strong communication and problem-solving skills to ensure successful project execution. This position is based out of our Gas City, IN office, and travel for field checks and interaction with customers/field personnel will be required for jobsites within a 75 mile radius. KEY ACCOUNTABILITIES Creation of detailed drawings (shop, steel erection, general arrangement) and 3D models. Interpretation and analysis of design documents including architectural/structural drawings and project specs and standards. Collaboration and communication with engineers, architects, fabricators, customers, and contractors to resolve design issues. Responsibility for connection design, quality control and continuous improvement. Proposal writing, RFI generation, and maintenance of material lists and reports. CORE COMPETENCIES Minimum associate degree or equivalent experience/training required. Structural steel and miscellaneous design work experience is required. Proficiency with AutoCAD design software and MS Office Suite is required. High level proficiency with MS Excel preferred. Automotive or similar manufacturing experience preferred. Proficiency in writing proposals and RFIs is required. Ability to follow and contribute to internal processes & procedures (document control, etc.). Ability to participate and work in team atmosphere is required. PHYSICAL REQUIREMENTS Ability to climb ladders, stairs, and navigate construction work areas. Exposure to construction site hazards such as moving mechanical parts, heights, fumes, and varying weather conditions. Commercial Contracting Corporation is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to age, color, race, religion, national origin, sex, sexual orientation, gender identity, protected veteran status, or disability status. Applicants who are offered a position must pass a pre-employment substance abuse test. IJC: IS GH 08192025 NOTICE TO RECRUITERS AND STAFFING AGENCIES Commercial Contracting Corporation and its affiliates and subsidiaries ("CCC") have an internal talent acquisition department. CCC may supplement that internal capability from time to time with assistance from temporary staffing agencies, placement services, and professional recruiters ("Agency"). Agencies are hereby specifically directed NOT to contact CCC employees directly in an attempt to present candidates - only CCC's talent acquisition team are authorized to present candidates to hiring managers. To protect the interests of all parties, CCC will not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to CCC, including unsolicited resumes sent to a CCC mailing address, fax machine or email address, directly to CCC employees, or to CCC's resume database will be considered CCC property. CCC will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. CCC will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agency must obtain advance written approval from CCC's talent acquisition function to submit resumes, and then only in conjunction with a valid fully executed contract for service and in response to a specific job opening. CCC will not pay a fee to any Agency that does not have such an agreement in place. Agency agreements will only be valid in writing and signed by an officer of CCC or authorized designee. No other CCC employee is authorized to bind CCC to any agreement regarding the placement of candidates by Agencies. CCC hereby specifically rejects, and denies any liability under, any agreement purporting to be accepted based on negative consent, negotiation with a candidate, performance, or any means other than the signature of a CCC officer or authorized designee.

Job Description Full-Time | On-Site Power the Future of Automation IFP Automation is growing fast - and we're looking for an Electrical Design Engineer to design the electrical control panels that drive world-class automation systems. This position is based at our newly expanded UL 508A certified manufacturing center in Fort Wayne, Indiana. You'll work closely with our design and fabrication teams while also occasionally supporting Sales Engineers in the field - engaging with customers directly and seeing how your designs power their success. What You'll Do Design industrial control panels with AutoCAD Electrical Handle equipment selection, BOMs, schematics, and compliance Collaborate with engineers, technicians, vendors, and customers Support testing and commissioning (in-house + on-site) Occasionally partner with Sales Engineers to provide customer-facing technical support What We're Looking For 3+ years in industrial control panel design Strong AutoCAD Electrical skills Experience with VFDs, relays, instrumentation, and networking Degree in EE, EET, or related field Bonus Points for: UL 508A knowledge, hazardous location experience, and industrial communication protocols. Why You'll Love It Here Competitive pay + 401(k) match Health, dental, vision, life, and disability coverage PTO + holidays Training and certifications to fuel your career A people-centered engineering culture built on trust, teamwork, and innovation IFP Automation - A people-centered engineering company. Empowering Engineered Systems.

Job Description Join Our Team as a Truss Designer JCT Recruiting LLC has a client seeking a talented and detail-oriented Truss Designer to join our engineering team as a vital part. In this role, you will be responsible for designing and engineering roof and floor trusses for various construction projects. Your creativity and technical expertise will help ensure the structural integrity and efficiency of our designs while meeting client specifications and industry standards. As a Truss Designer, you will collaborate closely with architects, project managers, and other engineering team members to deliver accurate and innovative designs that support the overall success of our construction projects. If you are passionate about structural design and looking for an opportunity to showcase your skills in a fast-paced, supportive environment, we'd love to hear from you! Key Responsibilities: Develop detailed truss designs and calculations based on project requirements and specifications. Utilize structural design software to create accurate models and simulations. Conduct thorough analysis to ensure designs comply with safety and building codes. Collaborate with team members to troubleshoot design challenges and implement effective solutions. Prepare production drawings and documentation for manufacturing processes. Communicate effectively with clients and stakeholders to address design inquiries and modifications. Stay current with industry trends, regulations, and software advancements in truss design. Requirements Qualifications: Bachelor's degree in Structural Engineering, Civil Engineering, or a related field. Proven experience as a Truss Designer or in a similar role; a minimum of 3 years preferred. Proficiency in structural design software, such as CAD and other engineering tools. Strong understanding of building codes, structural analysis, and engineering principles. Excellent attention to detail and problem-solving skills. Effective communication skills to interact with clients and team members seamlessly. Ability to work independently and collaboratively within a team environment. If you're ready to take the next step in your career and contribute to innovative truss designs, apply today to join the team at JCT Recruiting LLC!

Job Details Division: Nucor Rebar Fabrication Midwest Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Purpose: This is a non-remote, in-office position. Detail commercial and civil projects as it pertains to the supply and installation of rebar.Basic Job Functions: * Must adhere to Nucor's safety programs and standards. * Demonstrate conduct consistent with Nucor's vision and values. * Continue developing knowledge of industry reference material (i.e. CRSI and ACI manuals). * Verify drawings, dates, specifications, addenda and other contractual information from the routing sheet or directly from the business system. * Working with supervision, begin detailing more complex projects (i.e. jobs with columns, beams, one and two way slabs, and grade beams). * Bring any change(s) made to the contract documents to the attention of your supervisor (i.e. change made of the approval drawings, changes made by the field or yourself). * Detail accessories, mesh, couplers and dowel bars and prepare material lists as required. * Work with job site personnel to determine project requirements for detailing and delivery of material. * Work with A/E regarding problems or questions on contract documents. * Produce the material list for all products from RebarCAD and produce replacement orders as required. * Enter all drawings for submission into drawing tracking system. * Perform other duties as required by your supervisor. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Vocational certificate in CAD design/drafting issued from an accredited school or college, or equivalent combination of training and work experience At least one year of experience detailing rebar using a CAD based detailing system Preferences: Two year technical degree from an accredited school or college Construction and concrete related construction knowledge and experience Working knowledge of industry reference material (i.e. CRSI and ACI) Physical Demands * Typical office activities * Walking, sitting, standing, bending * Using hands to operate objects, tools, computers and other electronic equipment * Lifting/handling computers and related equipment * Vision abilities including close vision and adjusting focus * Moderate noise level Special Demands: * Must be able to work overtime when required * May be asked to complete approximately two hours of assessments as part of the hiring process Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Requirements 2 years technical college, 2 years college pre-engineering, Drafting Certificate or equivalent (SolidWorks 3D modeling beneficial). Necessary present knowledge of most current operating systems and software common to business applications (SolidWorks, AutoCAD, Microsoft Office Products including Word, Excel, PowerPoint and Project). Ability to communicate effectively both verbally and in writing both internally and with customers. Physical ability to travel freely within manufacturing and office facilities. This requires climbing stairs and moving over, around, and about shop machinery. Have the physical ability to lift and carry up to 25 pounds.

Job Title Business Unit Department Reports To Product Design Engineer Chore-Time Engineering Engineering Manager BU Location BU Acceptance Approved By: Date Approved Milford, IN Overall Purpose: Why the Job Exists & What You Will Do: As the Product Design Engineer, you will design, develop, and create innovative poultry components and equipment to meet customer expectations and business goals. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Product Design & Development: 100% of the Job Communicates and collaborates with customers, dealers, and network to establish product needs within the industry, as well as research competitive product lines, to create new or enhanced products that will drive business goals. Manages the design, layout, specifications, and testing of new or enhanced products, work with sheet metal and plastics, work with internal and external manufacturing to ensure the quality, timing, resources, and costs meet the overall expected results of the project. Leads, collaborates, and communicates with project team members to direct the detailed product design and implementation, ensuring a best practice approach for optimal implementation results. Travels to assist with product installments, meetings, and trade shows through the U.S. and Internationally to ensure the Voice of the Customer is integrated in every part of the processes. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education: Bachelor's Degree in Mechanical or Agricultural Engineering, or a related field; will also consider an equivalent combination of education and experience. Experience: 2+ years of experience with plastic part design, ventilation, fluid mechanics, or product design within an agricultural or farming environment preferred; will consider an entry level person with strong aptitude for the role preferably with related experience/understanding of poultry husbandry and housing. Certification(s): N/A Functional Skills: Strong foundational understanding of engineering and mechanical principles to design parts that include motors, mechanical power components, sheet metal parts, injection mold and extruded plastic parts, material flow, air movement/cooling systems, and movement of material (i.e. feed, eggs, and waste). The position requires strong analytical, problem-solving, conceptual, project management, time management, and organizational skills to take ideas, design a product, and execute to meet market needs. A familiarity with CE European product standards would be a plus. Technology Aptitude/Skills: Strong skill set in AutoCAD/3D CAD programming (Inventor/Vault); ERP system experience is a plus (Oracle preferred); Advanced Microsoft Office Skills (Word, Excel, Teams) required as well. Language Skills: Excellent verbal and written communication skills; will present ideas and outlines to management team, vendors, and customers. Leadership/Behaviors: Ability to work with an experienced team, who is collaborative and supportive. Can learn quickly to move past barriers and be a strong influencer to get things done to own the role. Culture Match: Excellent abstract thinking; creative, conceptual thinker with a solid common-sense approach to create solutions and push through obstacles. High integrity, Dependability, who can handle confidential information well. Will also be Customer-Focused, Cost Conscious, Strives for Excellence, and can thrive in a fast-paced environment. Will also be able to visit farms and interact with customers in a professional, well-received way. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and similar machines. This role will often use laboratory testing equipment, measuring instruments, waterjet, 3d printer, and other mechanical equipment to produce prototype and/or test equipment. Physical Requirements to Perform Essential Functions: Ability to operate a motor vehicle as needed for travel in the role Ability to sit at desk for 5+ hours per day Ability to operate keyboard and view computer screen for majority of day 6-7 hours Ability to write ideas/information in a logical flow for 5+ hours per day Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to read, write and speak English fluently Ability to communicate with others via phone, in-person, and computer on-going Ability to listen to customers, problem-solve, and respond accordingly Ability to sit, stand, bend, reach, kneel, squat, twist, push, pull, walk, stoop, crouch, and carry items frequently Lifting up to 15 lbs. sporadically Environmental Conditions & Travel: The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments and client locations. Testing and engineering lab environment with machines and equipment related to prototyping and testing. This position may be occasionally exposed to animals, dust, and dirt when visiting client locations. This position may face inclement weather conditions when traveling. Travel: 10 - 20% travel is required (Domestic & International) I have reviewed and understand the above . I understand that the company may change this as it deems necessary and at its discretion. I also understand that a copy of this job description is available to me through request to my manager or Human Resources department. Employee Name (Print) Employee Signature Date

Job DescriptionSalary: In this pivotal role, you will be instrumental in conceptualizing, designing, and developing Cutting Edge solutions to meet our customers at their point of need. Your work will directly impact industries ranging from automotive to agriculture, shaping the way people live, work, and thrive in a rapidly evolving world. What You'll Do: Innovate:Spearhead the design and development of next-generation products. Collaborate:Work closely with cross-functional teams of engineers, machinists, and customers to bring visionary concepts to life. Connecting with our customers and vendors to understand design requirements and end user function. Problem-Solve:Tackle complex engineering challenges with creativity and precision, from initial concept through prototyping, testing, documenting, and production. Optimize:Continuously improve designs for manufacturability, performance, and sustainability, ensuring our products exceed expectations. Investigating, identifying, and collaborating to implement cost savings using process and design. Steward: Guide engineering changes through resolving print questions and product requirements with customers or vendors. Provide internal customers; machinists, quality technicians, engineers, and operators, with updated documents and information necessary to meet our customers needs. Who You Are: Creative Thinker:You thrive on innovation, turning bold ideas into practical designs. Technical Expert: Proficient in CAD software (e.g., SolidWorks, AutoCAD) and experienced in designing for diverse manufacturing processes. An understanding of GD & T and able to apply it where appropriate. Previous manufacturing, machining, and production experience is strongly encouraged. You bring proven expertise in hydraulics, including working knowledge of system design ensuring reliable performance and system efficiency. Team Player: Collaborative, you excel in multidisciplinary teams, contributing your expertise while learning from others. Problem Solver: Adept at analyzing complex problems and implementing innovative solutions that drive real-world impact. Continuous Learner: Seeks out opportunities to continuegrowing in your knowledge base, through others or your own experience. A self-feeder, you desire to learn Integrity: Commitment and follow through to provide our customers and team with the necessary products and services.

Job DescriptionDescription: BUILD THE FIXTURES. ELEVATE THE FUTURE. We're searching for a Mechanical Engineer | Automation & Fixture Design who loves solving problems, building better processes, and creating tools that unlock new levels of efficiency and quality. This role sits at the intersection of design and manufacturing, blending mechanical engineering with automation thinking and hands-on craftsmanship. As part of our Process Engineering team, you will modernize legacy processes, design custom automation fixtures, and collaborate closely with machining and production teams to bring smart solutions to life. Your work directly strengthens throughput, repeatability, and the everyday experience of team members across our manufacturing operations. What You'll Do: • Design automation fixtures, tooling, and mechanical assemblies using SolidWorks • Build detailed 3D models, assemblies, and manufacturable drawings • Program and support CNC machining operations using Mastercam • Use 3D printing to produce complex fixture concepts and components • Partner with machinists, fabricators, and production teams to ensure practical, cost-effective designs • Participate in hands-on fabrication, assembly, and testing of fixtures and automation solutions • Lead small to medium-sized projects from concept through implementation • Identify continuous improvement opportunities that increase efficiency, reduce cost, and improve consistency --------------------------------------------------------------------------------------- What You Bring: • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related discipline • 2 to 5 years of mechanical design and automation fixture experience • Proficiency in SolidWorks • Experience with Mastercam or equivalent CAD/CAM software • Hands-on experience with CNC mills, CNC routers, and 3D printing • Strong understanding of mechanical design principles, materials, and manufacturing processes • Excellent problem solving, communication, and organizational skills --------------------------------------------------------------------------------------- Bonus Skills: • Experience creating fixtures in a high-volume manufacturing environment • Exposure to robotics, sensors, and automation components • Experience supporting continuous improvement or lean initiatives --------------------------------------------------------------------------------------- Why You'll Love Working With Us: • Opportunity to modernize processes and shape the next chapter of POLYWOOD manufacturing • Supportive engineering team committed to innovation, craftsmanship, and practical problem solving • Hands-on, creative work that directly improves how people build and work every day • Room to experiment, iterate, and build smart solutions that last • Culture that values curiosity, teamwork, and continuous learning --------------------------------------------------------------------------------------- About Us At POLYWOOD, engineering is core to how we bring durability, efficiency, and craftsmanship to life. Our Process Engineering team plays a central role in modernizing how our products are built, using smart automation, intelligent fixtures, and thoughtful mechanical design to keep our operations moving forward. In this role, you'll contribute directly to the systems and solutions that shape our production capabilities. The fixtures you design, the tools you build, and the improvements you implement will influence how thousands of POLYWOOD products are made every day. Your work strengthens the reliability, safety, and quality that define our brand and ensures our manufacturing operations remain innovative, efficient, and future ready. Check out this video - Genuine Polywood Ready to design and build solutions that elevate how we make world-class products every day? Apply now and help shape the future of our manufacturing operations! --------------------------------------------------------------------------------------- POLYWOOD is an equal opportunity employer. POLYWOOD evaluates qualified applicants without regard to characteristics protected by federal, state, or local laws. --------------------------------------------------------------------------------------- mechanical engineer, automation engineer, fixture design, tooling engineer, CNC programming, Mastercam, SolidWorks, process engineering, manufacturing engineer, 3D printing, CAD CAM, CNC machining, continuous improvement Requirements:

1st Shift CAD Detailer Pro Resources has partnered with a local custom metal fabrication shop servicing Indiana, Ohio, and Michigan, and we are looking for a CAD Detailer! Hours:1st shift 7am - 3:30pm Pay:$20-24/hour, depends on experience Requirements:- Self-motivated individual- Experience with sheet-metal/structural steel- Experience with AutoCAD Lite 2023- Attention to details- Willing to work alone or with a team- Shop floor experience a plus- Job Type: Full-time Benefits - Available 60 days after DH:- Dental insurance- Health insurance- Life insurance- Paid time off- Retirement plan#Portland

Salary: COMMERCIAL CONTRACTING CORPORATION OUR MISSION: TO IDENTIFY, HIRE AND RETAIN THE VERY BEST PEOPLE. OUR CORE VALUES KEEP PEOPLE SAFE: We must strive to protect our most valuable asset each and every day. INTEGRITY: We're one team made up of people who are dependable and act with integrity. HUMILITY: We are humble team players who prioritize the mission over personal ego. DRIVE: Our people are passionate about their work, relationships, and success. LOYALTY: We are dedicated to achieving the mission of each project and the overall company. ATTITUDE: We will inspire others to be positive and overcome daily challenges to achieve our mission. CCC was awarded the Top Workplaces USA Award for 2022, 2023, 2024, 2025 and earned the Top Workplaces Regional Awards from the Detroit Free Press from 2017 2025. We are proud to offer a very competitive wage and benefit compensation package that includes medical, dental, vision, disability, vacation pay, holiday pay, personal time, employee stock ownership program (ESOP), and a generous 401K program. JOB DESCRIPTION POSITION: DESIGNER/DETAILER (Structural and Misc. Steel) LOCATION: Gas City, IN OBJECTIVE The Designer/Detailer (Structural and Misc. Steel) plays a crucial role in translating the design intent into detailed, accurate drawings and models that guide the fabrication, erection, and construction of steel structures. The role is responsible for blending technical expertise with strong communication and problem-solving skills to ensure successful project execution.This position is based out of our Gas City, IN office, and travel for field checks and interaction with customers/field personnel will be required for jobsites within a 75 mile radius. KEY ACCOUNTABILITIES Creation of detailed drawings (shop, steel erection, general arrangement) and 3D models. Interpretation and analysis of design documents including architectural/structural drawings and project specs and standards. Collaboration and communicationwith engineers, architects, fabricators, customers, and contractors to resolve design issues. Responsibility for connection design, quality control and continuous improvement. Proposal writing, RFI generation, and maintenance of material lists and reports. CORE COMPETENCIES Minimum associate degree or equivalent experience/training required. Structural steel and miscellaneous design work experience is required. Proficiency with AutoCAD design software and MS Office Suite is required. High level proficiency with MS Excel preferred. Automotive or similar manufacturing experience preferred. Proficiency in writing proposals and RFIs is required. Ability to follow and contribute to internal processes & procedures (document control, etc.). Ability to participate and work in team atmosphere is required. PHYSICAL REQUIREMENTS Ability to climb ladders, stairs, and navigate construction work areas. Exposure to construction site hazards such as moving mechanical parts, heights, fumes, and varying weather conditions. Commercial Contracting Corporation is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to age, color, race, religion, national origin, sex, sexual orientation, gender identity, protected veteran status, or disability status. Applicants who are offered a position must pass a pre-employment substance abuse test. IJC: IS GH 08192025 NOTICE TO RECRUITERS AND STAFFING AGENCIES Commercial Contracting Corporation and its affiliates and subsidiaries ("CCC") have an internal talent acquisition department. CCC may supplement that internal capability from time to time with assistance from temporary staffing agencies, placement services, and professional recruiters ("Agency").Agencies are hereby specifically directed NOT to contact CCC employees directly in an attempt to present candidates only CCC's talent acquisition team are authorized to present candidates to hiring managers. To protect the interests of all parties, CCC will not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to CCC, including unsolicited resumes sent to a CCC mailing address, fax machine or email address, directly to CCC employees, or to CCC's resume database will be considered CCC property. CCC will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume.CCC will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. Agency must obtain advance written approval from CCC's talent acquisition function to submit resumes, and then only in conjunction with a valid fully executed contract for service and in response to a specific job opening.CCC will not pay a fee to any Agency that does not have such an agreement in place. Agency agreements will only be valid in writing and signed by an officer of CCC or authorized designee. No other CCC employee is authorized to bind CCC to any agreement regarding the placement of candidates by Agencies.CCC hereby specifically rejects, and denies any liability under, any agreement purporting to be accepted based on negative consent, negotiation with a candidate, performance, or any means other than the signature of a CCC officer or authorized designee.

Full-Time | On-Site Power the Future of Automation IFP Automation is growing fast - and we're looking for an Electrical Design Engineer to design the electrical control panels that drive world-class automation systems. This position is based at our newly expanded UL 508A certified manufacturing center in Fort Wayne, Indiana. You'll work closely with our design and fabrication teams while also occasionally supporting Sales Engineers in the field - engaging with customers directly and seeing how your designs power their success. What You'll Do Design industrial control panels with AutoCAD Electrical Handle equipment selection, BOMs, schematics, and compliance Collaborate with engineers, technicians, vendors, and customers Support testing and commissioning (in-house + on-site) Occasionally partner with Sales Engineers to provide customer-facing technical support What We're Looking For 3+ years in industrial control panel design Strong AutoCAD Electrical skills Experience with VFDs, relays, instrumentation, and networking Degree in EE, EET, or related field Bonus Points for: UL 508A knowledge, hazardous location experience, and industrial communication protocols. Why You'll Love It Here Competitive pay + 401(k) match Health, dental, vision, life, and disability coverage PTO + holidays Training and certifications to fuel your career A people-centered engineering culture built on trust, teamwork, and innovation IFP Automation - A people-centered engineering company. Empowering Engineered Systems.