Computer aided design designer jobs in Las Vegas, NV

A 20 year old Commercial Audio Visual Integrator is seeking an experienced Commercial Audiovisual Design Engineer for Pre and Post-Sales Design work. As with all HireSparks clients in the AV industry, this client seeks full-time employees only, with excellent salary, benefits, and PTO. Location can be either Las Vegas, or Reno. THIS COMPANY CATERS TO COMMERCIAL AND UNIVERSITY CLIENTS ONLY. THIS IS NOT CASINO OR HOSPITALITY WORK. *Can go up to $110k (depending on experience). The job responsibilities of the Design Engineer include the following: Conceptualize from scratch AV systems designs Interface & maintain ongoing dialogue for projects with Clients, Sales, CAD, and Tech Ops team members Provide documentation for quotes & bid packages detailing equipment, cost, labor estimates, pre-installation requirements, and site survey results Develop detailed Bill of Materials (BOM), detailed infrastructure drawings in CAD for architect, general contractor and electrical contractor use, and create final engineering drawings for rack layout, system wiring and custom plates or cabling assemblies Maintain awareness of emerging technology that can fit our client's budget without sacrificing quality or reliability The design engineer will be able to help in this area by: Assist in the preparation of consultant specified bids and submittals Assist and perform client site visits for initial surveys, ongoing technical assessment, and support for tech ops during integration, install, & commissioning Assist programmer with technical direction when developing user interfaces & control programs and be able to support Crestron or BSS programming. Create, and manage change orders to assist with maintain or increasing profitability on projects Assist with technical oversight, red lines, and design questions during integration & commissioning of systems Capture field mark ups and assist with generating As-Build drawings sets for the final design package What do we require from you? • CTS and/or CTS-D preferred • 5+ years' experience in AV systems design • A thorough, demonstrable understanding of systems integration techniques • Proven experience developing a detailed BOM for fully functioning AV systems designs • Skilled in the use of AutoCAD and Visio • Knowledge of or a desire to learn about networking systems design and operation • MS Office - able to use Excel, Word, PowerPoint, Access proficiently without training

Job Description Exocad Designer - Full-Arch / All-on-4 We are looking for a talented Exocad Designer with proven expertise in full-arch implant restorations and same-day smile makeovers. This role is central to our surgical-day success, ensuring patients receive esthetic, functional results with precision and efficiency. The right candidate will bring advanced knowledge of digital design workflows, CAD/CAM processes, and implant-supported restorations, along with the ability to collaborate seamlessly with both the surgical and lab teams. What You'll Do Full-Arch & All-on-4 Design Plan and execute Exocad designs for full-arch implant cases. Create surgical-day provisionals with accurate occlusion, esthetics, and function. Same-Day Smile Makeovers Perform real-time Exocad design chairside/surgical-day for immediate provisionals. Handle nesting, milling, and 3D printing for temporary and final restorations. CAD/CAM Workflow Manage the full digital workflow: design, nesting, milling, printing, bar design, and adjustments. Troubleshoot issues quickly to keep cases on track. Materials & Frameworks Work with PMMA, nano-ceramics, zirconia, and titanium bars. Design and refine implant-supported bars and frameworks with durability and precision. Collaboration & Quality Partner with surgeons and lab staff to streamline processes and improve efficiency. Consistently deliver restorations that meet the highest esthetic and functional standards. What We're Looking For Strong background in Exocad design for full-arch/All-on-4 cases. Hands-on experience with same-day surgical workflows. Deep understanding of CAD/CAM systems and troubleshooting. High attention to detail, with a passion for esthetics and patient outcomes. Ability to thrive in a fast-paced, collaborative environment.

CDM Smith is seeking a Lead Computational Designer to join our Digital Engineering Solutions team. This individual will be a key leader within the Design Technology group, driving the firm's digital transformation in design automation, computational design strategies, and BIM technologies by providing strategic guidance, technological vision, and solution development. This group specifically utilizes visual scripting to apply computational strategies to the design process across our architecture, engineering, and construction (AEC) disciplines, and specializes in BIM, CAD, and digital twin technology from a design technology perspective. This position is for a person who has demonstrated excellence in computational design capabilities, is highly experienced with AEC design technologies, and excels at framing problems, shaping & creating solutions, and championing implementation. As a senior member of the Digital Engineering Solutions team, this person will also engage in research and development and provide strategic oversight to the AEC practices at CDM Smith, engaging in new product research, testing, and the incubation of innovative ideas that arise from around the company. The ideal candidate will have a proven record in the field of computational design technology, with a mindset of continuous learning and curiosity leading to tangible results. Under the direction of the Design Automation Manager, the duties and responsibilities for this position include: - Leading and overseeing projects on the cutting edge of BIM & computation, solving design and process challenges using BIM applications and computational design modeling plug-ins such as Autodesk Revit/Civil3D and Dynamo, Rhino and Grasshopper, Bentley applications and Generative Components, and other associated digital tools and code languages such as Python/C#. - Developing and implementing advanced computational solutions to complex architecture, engineering, and environmental science problems via visual programming. - Providing strategic direction and technical leadership to the team and across the organization. - Mentoring and developing junior and mid-level team members, fostering a culture of continuous learning and innovation. - Collaborating as part of a multidisciplinary team across a global practice, building and maintaining excellent interpersonal relationships. - Leading and driving initiatives and efforts, with your BIM, CAD, and computational design expertise. - Staying at the forefront of the latest developments and advancements, including new and emerging technologies & best practices and new tools & software applications impacting digital design - and how they could impact CDM Smith. - Developing and maintaining documentation, standards, best practices, and workflows for design technology hardware/software in use across the business. - Presenting to both internal and external audiences, representing the company at industry events and conferences. - Performing other miscellaneous tasks associated with being a senior member of the Digital Engineering Solutions team as required. \#LI-LP1 \#LI-REMOTE **Job Title:** Lead Computational Designer **Group:** COR **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree. 8 years of related experience. Equivalent additional directly related experience will be considered in lieu of a college degree. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. **Preferred Qualifications:** - Expert knowledge and proven ability in the area of AEC design automation/computational design highly preferred. - Extensive experience with visual scripting tools like Dynamo, Grasshopper, and Generative Components. - Proficient in Python and C#, with experience using these languages to create custom tools and integrate with Autodesk Platform Services (APS) and other APIs is considered an asset. - Proficiency in DevOps practices, GitHub, Azure, and/or other development infrastructure, along with knowledge of project management and agile development processes are considered assets. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 5% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Inquisitive, with a desire to ask questions to gain a deeper understanding of business issues. Passionate about helping AEC business lines drive their success in using design technology and design automation. - Excellent written and oral communication skills with the ability to communicate well with people from both technical and non-technical backgrounds. Ability to listen, build rapport, and credibility as a strategic and diplomatic partner with our business units. - Innovative and able to apply critical thinking skills to generate new solutions/ideas that create value and improve processes. - Detail-oriented with the ability to lead and execute highly complex or specialized projects. - Leverages expert-level analytical thinking to proactively identify, assess, and solve sophisticated digital design challenges across multidisciplinary teams. - Excellent understanding of business metrics and the ability to align company goals and objectives with computational design strategies and initiatives. - Demonstrates strong awareness and knowledge of data governance principles, digital design integrity and data management protocols. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $89,336 **Pay Range Maximum:** $147,389 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Fully Remote or Hybrid Work Options may be considered for successful candidate. **Additional Pay Range Information:** The pay range for this position is listed above. This pay range is a good faith estimate representative of all experience levels for this position based on the geographic location assigned to the position. Please note that pay ranges vary based on geographic location. In addition to geographic location, the company considers several other factors when extending an offer including but not limited to the role, function and associated responsibilities, the candidate's work experience, education/training and key skills. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Spiegelworld creates genre-defying live entertainment destinations, combining smash-hit shows with one-of-a-kind cocktail and dining experiences, powered by the world's most talented artists and artisans and devoured by savvy, seen-it-all adult audiences. Founded in 2006, Spiegelworld is a community of 700+ organizers, agitators, dreamers, doers, insiders, outsiders and iconoclasts of every flavor, on a mission to make the world a more art-filled, inspired and playful place, one unforgettable memory at a time. About the Role The Experiential / Architectural Project Designer is responsible for creating immersive, one-of-a-kind physical environments and experiences by integrating architecture, art, interior design, art direction, and technology to guide and engage people, fostering unique and memorable interactions within all its performance spaces, restaurants and bars. They serve as a multidisciplinary team member, collaborating with outside architects, engineers and vendors to develop architectural plans, renderings, and cohesive, story-driven environments that leave a lasting impression. The Experiential / Architectural Project Designer will be a key member of our internal creative team based in Las Vegas. In this role, they will work closely with executive leadership and the creative team to help incubate new projects from ideation, into development and through construction. This position reports to the Senior VP of Production, Design and Development. The salary for this full-time position is $125,000/year. What You'll Do Develop and champion design concepts rooted in theatrical storytelling, immersive experience, and operational functionality. Translate abstract creative briefs and production narratives into cohesive, buildable design strategies across a range of typologies: theaters, restaurants, lounges, artistic installations, and public spaces. Coordination and integration of architectural elements, interior designs, scenic and technical elements across projects, maintaining alignment with Spiegelworld's aesthetic and brand. Manage design processes from initial programming and ideation through construction administration and final installation. Oversee internal and external design resources, including consultants, fabricators, and contractors, ensuring design intent is realized with fidelity. Lead cross-functional design presentations for internal leadership and external partners, articulating concepts and strategies through renders and imagery with clarity and inspiration. Create conceptual renderings that convey design intent with a focus on mood, lighting, overall vibe. Actively engage in our antiracist commitment and internal practices by participating in offered learnings, engaging in conversations around Equity, Diversity, Inclusion, and Accessibility, and helping us maintain a safe and welcoming workspace. Create a work environment which promotes teamwork, performance feedback, recognition, mutual respect, and employee satisfaction. Ensuring adherence to policies and procedures, setting the standard for excellence in the venue. Always maintain a safe working environment by conforming to all established safety policies and procedures. Additional duties as assigned by the manager based on business needs. What You Bring Spiegelworld is a company that prides itself on its creativity and ideation. Those processes do not stop once a show or project opens, in fact, that merely marks the beginning of a journey of evolution. Patience and adaptability are not only valued at Spiegelworld but are a necessity and those that find the greatest success within the organization are those that thrive within those conditions. Minimum 5+ years of progressive experience in architecture, experiential design, art and interior design with a focus in entertainment and hospitality. Bachelor's or Master's degree in architecture, Interior Architecture, Interior Design, or related field; professional licensure a plus. Demonstrated expertise in hospitality, entertainment, or experiential design-with a portfolio that includes complex, theatrical, or immersive built environments. Proven track record of taking projects from concept to completion across multiple cities and jurisdictions. Deep knowledge of spatial planning, construction methodologies, materials, detailing, ADA compliance, codes, and project delivery. Fluency in design software: AutoCAD, Rhino, Adobe CS required. Revit, 3ds Max, Blender, or other visualization tools are a plus. Exceptional leadership, communication, organizational and presentation skills, with the ability to align multidisciplinary teams around a unified vision. Comfortable navigating ambiguity and creatively solving problems in a fast-paced, ever-evolving organization. Exceptional work ethic, exacting attention to detail, and a collaborative attitude are a must. Ability to thrive in a fast-paced, dynamic environment with shifting priorities and tight deadlines. Flexibility to travel as needed and work evenings, weekends, and holidays as required by project demands. Must have valid work authorization for the US. Successful background check clearance prior to hire. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Comfortable conducting site walks and inspections in a variety of environments, including active construction zones, rooftops, basements, and unconventional venues. Ability to stand, walk, bend, and climb stairs/ladders for extended periods during site visits or venue walkthroughs. Comfortable navigating uneven terrain and temporary worksite conditions (e.g., dust, noise, temperature variations). Work is performed in a high-volume entertainment and hospitality environment; candidates must be tolerant to varying conditions of noise level, temperature, illumination and air quality. The noise level in the work environment is usually moderate to high. Work can occur outdoors at varying times of the year, so candidates should be comfortable working within a wide range of temperatures. What We Offer Spiegelworld is proud to offer a comprehensive compensation and benefits package to our eligible full time employees that is designed to elevate your experience. We prioritize your well-being with 100% employer-paid health coverage Generous vacation and paid time off, including holidays Fuel your growth with professional development funding Embrace the chance to make a difference through paid time off for community service Secure your future with a 401k and matching contribution Enjoy employee discounts on diverse goods and services IDEA All Spiegelworld employees participate in deepening the organization's commitment to becoming an inclusive and accessible organization by participation in IDEA. Standing for Inclusion, Diversity, Equity, & Accessibility, the Spiegelworld IDEA program is an internal culture program that serves as the foundation of our lifelong commitment to antiracism within our company and the greater entertainment and hospitality circles we participate in. Each employee is responsible for conducting their work in an equitable manner and our staff works together to continue to learn about anti-racism, practice harm prevention, and support the greater communities we work in. Please visit our website to learn more about our Statement of Inclusivity and Commitment to Anti Racism. Hiring Journey Community and collaboration are integral to the work we do and worlds we create at Spiegelworld. When filling new positions in our organization we feel it is so important to make sure the fit, for both you and us, is just right. While our goal is always to fill positions in a timely manner, we prioritize taking the time to truly get to know prospective candidates. The hiring timeline varies from role to role but can take anywhere from 2 weeks to several months.

Job DescriptionDescription:About the Role We're looking for a Senior Thumbnail Designer to craft bold, high-performing visuals that drive millions of clicks and define the visual identity of the Spy Ninjas universe. You'll transform key story moments into eye-catching, emotion-packed thumbnails that stop the scroll and inspire viewers to watch. This is a hands-on creative role for a designer who understands both storytelling and YouTube performance. You'll concept, design, and iterate thumbnails that balance artistry with strategy using data, testing, and audience insight to guide your creative instincts. Key Responsibilities Concept Development: Work with producers, editors, and talent to brainstorm thumbnail ideas that elevate each video's narrative and emotional hook. Thumbnail Creation: Design and deliver world-class thumbnails that grab attention, tell a clear story, and align with the Spy Ninjas brand. Visual Consistency: Uphold and evolve the brand's thumbnail style guide-ensuring every design feels cohesive, distinct, and instantly recognizable. A/B Testing & Optimization: Partner with the analytics team to interpret CTR data, test new formats, and refine creative direction based on results. Collaboration with Production: Identify key visual moments during shoots and guide photo captures or pose setups to improve thumbnail quality. Trend Research: Stay current on YouTube design trends, competitor visual strategies, and evolving platform best practices. Mentorship: Provide feedback or creative input to junior designers or freelancers when needed. Requirements: 3-5+ years of experience in graphic design or thumbnail creation for digital or social platforms (YouTube experience strongly preferred). Expert-level skills in Photoshop; proficiency in other tools like After Effects, Illustrator, or Lightroom is a plus Proven track record of designing thumbnails or social visuals that perform at scale. Deep understanding of YouTube CTR, visual storytelling, and audience psychology. Strong photo editing, compositing, and retouching abilities. Ability to work quickly under tight deadlines while maintaining high creative standards. Interest in gaming, kids' entertainment, or story-driven YouTube content a big plus.

Technical Designer - Casino Gaming Company 📍 Las Vegas, NV & Southern California | Onsite Do you love bringing ideas to life at the intersection of art and technology? We're looking for Technical Designers to join our fast-growing casino gaming team in both Las Vegas and Southern California. This role is all about bridging the gap between creativity and development-taking bold game concepts and making them production-ready experiences that players love. What You'll Do As a Technical Designer, you'll work hand-in-hand with artists, animators, and developers to shape the next generation of casino gaming. Your day-to-day could include: Creating polished game mockups that showcase new features and experiences. Designing particles, animations, and VFX that bring gameplay to life. Building optimized 3D models and textures ready for production. Assisting creatives with drawing and refining game elements. Transforming early concepts into game-ready assets that run smoothly. Partnering with developers to ensure designs are functional, optimized, and achievable in the engine. Tools You'll Use We want someone comfortable working across design and dev environments, including: Adobe Creative Suite (Photoshop, Illustrator, After Effects) Spine (2D skeletal animation) HTML / CSS for UI work and layout tweaks 2D & 3D art production pipelines File optimization for real-time performance (✨ Bonus: Coding or scripting experience will make you stand out!) What We're Looking For This role is a fit if you are: A problem solver who thrives on making the impossible possible. Comfortable working independently while also collaborating across multiple teams. Quick to pick up new tools and processes. Receptive to feedback and able to iterate fast. Organized enough to manage multiple projects and accurately estimate timelines. Qualifications Degree or diploma in Graphic Design, Game Art & Design, or Game Development. 4+ years of experience in Gaming, Design, Marketing, Advertising, Publishing, or Animation. Strong expertise in Adobe Creative Suite and game-ready asset production. HTML / CSS knowledge; coding or scripting a plus. Why Join Us? This is more than a production role - it's your chance to shape how our games look, feel, and perform. You'll be at the crossroads of art and engineering, making sure our concepts don't just look amazing on paper but also deliver a seamless player experience. If you're ready to blend creativity, technical skill, and problem-solving into work that's fun, challenging, and seen by thousands of players-this is the role for you. Laurie Roth President/Sr. Consultant DSN-IT ************ ************* ************** ****************************************************

At Elevation3D, we design, build, and deliver immersive brand experiences that bring ideas to life. As a full-service exhibit, event, and environment company, we specialize in creating custom trade show exhibits, experiential activations, and architectural installations for some of the most recognizable brands in the world. Position Overview: We are seeking a detail-oriented and experienced CAD Detailer to join our team. This role is critical in translating design concepts into precise technical drawings and 3D models used in the fabrication of trade show exhibits and custom environments. The ideal candidate will have strong AutoCAD skills, excellent spatial awareness, and a solid understanding of fabrication methods and trade show requirements. Job Type: Temporary, Full-Time (6-Month Assignment, with Potential for Full-Time Employment Based on Business Need) Requirements Key Responsibilities: Create accurate 3D solid models and detailed layouts from design renderings. Produce comprehensive shop drawings for custom cabinetry, exhibits, and environments. Generate parts files for CNC router programming and production. Develop scaled floorplans, electrical layouts, and rigging plans for show services. Create step-by-step setup drawings for on-site installation teams. Collaborate closely with fellow detailers to maintain department timelines and workflow efficiency. Participate in internal design reviews and quality control meetings. Assist with department standards, block library management, and process improvement initiatives. Qualifications: Ability to work effectively in a fast-paced, deadline-driven environment. Willingness to work extended hours and weekends as needed for project deadlines. Highly detail-oriented, self-motivated, and organized. Strong communication and teamwork skills. Dependable and proactive with a strong work ethic. Comfortable working both independently and collaboratively within a team. Technical Skills: Proficient in AutoCAD 2020+, including 3D modeling with AutoCAD primitives and use of model/paper space. Skilled in Mastercam X9 or newer for generating parts files. Familiarity with be Matrix aluminum extrusion systems. Knowledge of trade show fabrication standards, production timelines, and utility drawing requirements. Please note that as part of our hiring process, all final candidates will be required to complete a comprehensive background check. This may include, but is not limited to, verification of employment history, education, criminal records, and other relevant information to ensure suitability for the role.

Sparks Wiz Limited is a leading engineering consultancy firm dedicated to providing innovative and sustainable engineering solutions. Our team of experts collaborates across disciplines to deliver exceptional projects for our clients. We are seeking a detail-oriented and skilled CAD Technician to join our dynamic engineering team. The ideal candidate will have a strong background in computer-aided design and drafting, with the ability to produce accurate and high-quality technical drawings for a variety of engineering projects. Key Responsibilities: Technical Drafting: Create detailed 2D and 3D drawings and models using CAD software (e.g., AutoCAD, Revit, SolidWorks) based on specifications provided by engineers and architects. Develop schematics, layouts, and detailed plans for construction, manufacturing, and engineering projects. Collaboration: Work closely with engineers, architects, and other team members to understand project requirements and ensure accurate representation of designs. Participate in project meetings to discuss design concepts and modifications. Quality Assurance: Review and verify drawings for accuracy, completeness, and compliance with project specifications and industry standards. Update and revise drawings based on feedback from engineers and clients. Documentation: Maintain organized records of all drawings, models, and revisions. Prepare technical documentation and reports as required. Technical Support: Provide support to engineering teams by preparing presentations and visual aids for project proposals and meetings. Assist with the creation of technical manuals and installation guides. Qualifications: Associate's degree or certification in CAD technology, drafting, engineering, or a related field. Proven experience as a CAD Technician or in a similar role. Proficiency in CAD software (e.g., AutoCAD, Revit, SolidWorks) and other relevant design tools. Strong understanding of engineering principles, technical drawings, and construction methods. Excellent attention to detail and accuracy. Strong organizational and communication skills. Ability to work independently and as part of a team. Familiarity with industry standards and regulations. Working Conditions: The role is remote. Occasional travel to project sites and client meetings may be required. Why Join Sparks Wiz Limited: Competitive salary and benefits package. Opportunities for professional development and career advancement. A collaborative and innovative work environment. The chance to work on diverse and exciting projects. Job Type: Full-time Pay rate: $16 - $22 per hour Expected hours: 40 per week Benefits: 401(k) Dental insurance Health insurance Life insurance Vision insurance Paid time off (PTO) Experience level: 2 years Shift: 8 hours Day shift Weekly day range: Monday to Friday Equal Opportunity Employer: Sparks Wiz Limited is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Package Details Life Insurance Paid Time Off

Job Description Join Our Team. Do Your Best. Grow Your Career. When you join FEA, you become a part of our team of dedicated and supportive people focused on delivering best-in-class service to our clients and partners. Founded in 1989 by Robert Finnegan and Boyd Erickson, FEA Consulting Engineers serves both the public and private industries with the one quality that seemed to be missing in the consulting world: SERVICE. We take pride in our reputation of providing excellent service to our clients, owners, and partners. We are committed to maintain our level of service and expertise on all of our projects. This includes providing designs for schools with concentration on sustainability, or restaurants that need an environment to align with their culinary arts vision, to mega resorts seeking to create an unparalleled guest experience. Our highly diversified portfolio includes some of the most unique buildings constructed on the planet. We recognize that our people set us apart from all the rest. As a member of the team, you can expect: A culture that encourages learning and development. Competitive Compensation and Benefits package. Challenging and rewarding projects. Team events and activities to connect and blow off steam. Involvement with community development activities and non-profit programs. Position Overview: The Revit MEP Drafter supports our engineering teams in producing high-quality construction documents for mechanical (HVAC/plumbing) systems. Ideal candidates are comfortable working in a fast-paced, highly collaborative BIM environment. Essential Job Functions/Duties: Work with engineers to develop and update original drawings and revisions for engineering projects using Revit MEP models, AutoCAD, 3D, and other software for HVAC and plumbing system projects. Draft layouts based on engineer markups and red lines. Coordinate model elements to support various level engineers and project managers during the planning and design stages of projects. Assist with the development and maintenance of standard Revit families, templates, details and graphic standards. Assist with the development and maintenance of standard AutoCAD templates, details and graphic standards. Utilize AutoCAD and Revit to translate mark-ups/sketches into drawings consistent with company standards; check drawings for consistency with standards and plot final drawings; correctly label final work drawings; and update contract drawings and specifications. Maintain standard drawing files and templates in accordance with company standards. Assist in field activities to gather project information as necessary. Coordinate work with disciplines including electrical, mechanical, plumbing, lighting and low voltage. Work at the direction of the Project Manager. Provide technical support to other engineers and draftspersons. Attend staff meetings. Interact with clients, vendors, contractors, architects and fellow engineers to coordinate designs. Report to Project Managers and senior management about progress and changes. Maintain professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. Contribute to team effort by accomplishing related results as needed. Comply with the company policies and procedures. Required Qualifications: 1+ year of MEP Revit drafting experience. Ability to clearly communicate verbally and orally about highly technical subject matter. Thorough understanding of plumbing systems and component materials. Ability to work extended hours and workdays in a fast-paced environment to meet deadlines and work demands as needed. Capacity to analyze a problem from multiple perspectives and explore creative solutions. Exceptional verbal and written communication skills. High attention to detail with a desire for excellence. Proficiency in Microsoft Office Suite. Exceptional organizational and project management abilities. Ability to work well with others. Professional attitude and appearance. Valid Drivers' license. Physical & Mental Demands and Working Conditions: Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to remain in a stationary position at least 50% of time. Must occasionally move about inside the office to access file cabinets, office machinery, etc. Frequently communicates with co-workers and patients/clients in person and over the telephone to answer questions and provide assistance. Must be able to articulate concepts and ideas in a clear, concise and accurate manner. Must have the ability to assess problems and provide solutions and use good judgment. Occasionally will need to reach with hands and arms, lift up to 25 pounds, climb/balance, stoop/kneel/crouch/crawl and push/pull file cabinet drawers. Must be able to identify and assess information on computer screens and written reports and documentation and record accurate written and electronic messages and reports. Requires the ability to distinguish letters or symbols and eye/hand coordination. Position requires occasional (20%) travel within the local area, traveling to office and business locations to conduct business transactions. This involves exposure to weather conditions, traveling distances to and from buildings, and operating a vehicle. Requires the ability to distinguish letters or symbols and eye/hand coordination. Ability to Comply to the Company Drug and Alcohol Policy as a requirement of a position that could adversely affect the safety of others.

JOB SUMMARY/OBEJECTIVE: Play a crucial role in translating client requirements into accurate and visually compelling designs. ESSENTIAL DUTIES AND RESPONSIBILITIES: Utilize computer-aided design using Autodesk AutoCAD software to create detailed shop drawings and assembly instructions for frames and other fabricated structures. Interpret client specifications and accurately depict fully dimensioned frames based on provided information. Collaborate with others to propose design solutions when required. Develop complete sets of documentation, including comprehensive shop drawings and assembly instructions. Create 3D illustrations of the merchandise to enhance visual understanding. Participate in product development and projects as required, contributing to the design and improvement of various items. Collaborate effectively with cross-functional teams, including designers, engineers and project managers. Ensure accuracy, efficiency and adherence to project timelines. Any other related task and/or responsibility assigned by supervisor. COMPETENCES Positive and approachable attitude. Transparent and trustworthy. Adaptability and versatility. Self-ac countable. Manages time effectively. Customer/quality focus (everyone employee is our internal customer). Team focused. Leads by example and is purpose driven. SUPERVISORY RESPONSIBILITIES: No direct supervisory duties. POSITION TYPE / EXPECTED HOURS OF WORK: This position might require long hours and occasional weekend work to follow up with specific projects assigned. EXPERIENCE AND SKILLS PREFERRED: Associate's Degree (or other 2-year degree); one to two years related experience and/or training; or equivalent combination of education and experience. High proficiency in CAD software Other duties: Please note this Job Description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Your Role As a Gensler Designer with our team in Las Vegas, your job is to combine creativity and technical knowledge with business skills and understanding to produce functionally beautiful spaces for our incredible clients. With you as part of the team, our designs have never been so engaging. What You Will Do Collaborate on interior architecture and interior design projects that include programming client needs, conceptual design, schematic design, design development, space planning, and management of budgets and schedules Coordinate with Interior Designers, Project Architects and Project Managers to deliver project milestones Provide project team coordination for finish plans, specifications, and material selections needed for construction Provide design support and documentation during completion and execution of design concepts Work with external consultants, product representatives, furniture dealers, consultants, and fabricators to meet overall project objectives Assist in managing client expectations, team communication and consultant coordination Establish and maintain ongoing, productive client relationships Provide guidance, mentorship and training to teammates as needed Your Qualifications Bachelor's degree in Architecture, Interior Design or Interior Architecture from an accredited program 6+ years of relevant (interior architecture for hospitality) professional experience, ideally inclusive of all phases through construction administration Proficient in Revit, SketchUp, AutoCAD, 3D and other modeling software programs Strong knowledge of the design process, including FF+E, furniture systems and specifications, color and materials Outstanding conceptual 3-dimensional thinking and graphic presentation skills to effectively communicate design ideas Knowledge of Photoshop, Enscape, Illustrator, InDesign a plus Flexibility to focus on concurrent projects in various stages of development Ability to communicate design ideas and direction quickly A quick learner with an ability to thrive in a fast-paced work environment Strong leadership, organization, communication and relationship management skills Demonstrated commitment to sustainability and sustainable building practices; If possible, portfolios should include at least one project (especially built projects with LEED, Living Building Challenge, WELL Building Standard, Fitwel, and/or Net Zero Building certification) with this particular focus, which we look forward to discussing during the interview Licensed/Registered Architect, NCARB, LEED GA or AP preferred Design Technology at Gensler Applications we work with Design Authoring - Revit, Rhino, Autocad, Navisworks Collaboration - BIM360 Computational Design - Grasshopper, Dynamo Building Performance Simulation - Insight, Sefaira, Diva, Ladybug tools Visualisation - Vray, Enscape, Twinmotion, 3DSMax Graphics & Productivity - Adobe Creative Suite, Microsoft Office Suite Experiential - Unreal Engine, Unity Development - C#, Python **The base salary will be estimated between $80,000 - $95,000 plus bonuses and benefits and contingent on relevant experience. To learn more about our compensation philosophy and full benefits offerings, please visit Great People, Great Rewards | Gensler Life at Gensler At Gensler, we are as committed to enjoying life as we are to delivering best-in-class design. From curated art exhibits to internal design competitions to “Well-being Week,” our offices reflect our people's diverse interests. We encourage every person at Gensler to lead a healthy and balanced life. Our comprehensive benefits include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401k, profit sharing, employee stock ownership, and twice annual bonus opportunities. Our annual base salary range has been established based on local markets. As part of the firm's commitment to licensure and professional development, Gensler offers reimbursement for certain professional licenses and associated renewals and exam fees. In addition, we reimburse tuition for certain eligible programs or classes. We view our professional development programs as strategic investments in our future.

Full-time Description Are you a detail-oriented designer with a passion for automation, control systems, and electrical design? EMI, part of ENTEK's global engineering team, is seeking an Electrical Designer to create high-quality electrical control panel designs, schematics, and system layouts for automated machinery and process systems. You'll collaborate closely with engineers, drafters, project managers, and customers to develop accurate, code-compliant electrical documentation and ensure every system meets the highest standards of performance and safety. What You'll Do Design electrical schematics, control panels, and system layouts using CAD software Select, size, and specify automation components (VFDs, PLCs, I/O systems, power distribution, etc.) Develop and maintain bills of materials (BOMs) and technical documentation Collaborate with engineers to ensure designs comply with NEC, NFPA 70, UL 508A, CE, and IEC standards Participate in design reviews, oversee drafter detailing, and approve as-built redlines Support panel fabrication and field installation with documentation and troubleshooting Estimate project time, cost, and materials Maintain organization of project drawing sets and revisions About ENTEK ENTEK's DNA is based on a set of core values, which drive everything we do: Respect, Integrity, Innovation, and Commitment. Stop by our website at ************* to learn more about our company and the opportunities that await you. ENTEK is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. ENTEK's locations are non-smoking. Please inquire if you have questions. Requirements Job Requirements Associate degree in CAD or 5+ years of electrical CAD experience Strong knowledge of AutoCAD Electrical and electrical design standards Ability to read and interpret schematics, P&IDs, I/O lists, and component manuals Experience designing electrical schematics and interconnect diagrams Familiarity with VFDs, PLCs, power distribution, and industrial automation systems Excellent problem-solving and communication skills A self-driven attitude and commitment to safe, high-quality work Preferred Skills Experience with European electrical standards (CE) Experience designing facility conduit and power layouts (2D/3D) Knowledge of Lean manufacturing tools (5S, Kaizen, etc.) Salary Description $90,000 - $126,000 per year

Drafter - Facilities Asset Management - (2500066F) Description View below for full details & minimum position requirements. ************* net/employees/resources/pdf/desc/support-staff/7720. pdf NOTE: It is the applicant and employee's responsibility to upload all required documents as listed in the . If you currently hold a position that requires a certification listed in the job description, that document still needs to be uploaded to your application. Months: 12 / Hours: 8 Primary Location: HENDERSONWork Locations: MAINTENANCE 1180 MILITARY TRIBUTE PLACE HENDERSON 89074Job: Skilled Trades/TechnicianOrganization: Clark County School District Day JobJob Posting: Dec 3, 2025, 5:49:48 PMUnposting Date: Dec 9, 2025, 7:59:00 AM

Our Opportunity GPJ is hiring a CAD Engineer to join our growing team. This role is on-site, requiring you to report to our Las Vegas office location a minimum of 5 days per week. Your Role As an Engineer at GPJ, you're tasked with producing Detailed Models, Construction Drawings, Floorplans, Installation Documents, and various other deliverables using CAD applications such as Autodesk AutoCAD and Autodesk Inventor. You work closely with Fabrication Project Managers, Structural Engineers, Creative teams, Client Account teams, and Fabrication Shop personnel to process scopes of work and design intent through iterative stages of development and feedback cycles. Your position serves as a crucial bridge between conceptual design and the final product, ensuring that what is fabricated meets the requirements of the project. Your role is to provide service and quality outputs to project stakeholders and uphold the Engineering Department's mission of delivering the best experience for customers with safety, stability, and sufficiency. You also play a key part in developing space plans that dictate how display elements will be arranged at different events. By collaborating closely with the team, you address any issues that arise to finalize the drawings for approval, which often involves translating rough sketches from team members or structural engineers into detailed drawings. Additionally, you coordinate your efforts with the CNC department to streamline drawing processes and minimize redundancy. Your Skills Work from sketches and/or input from the various project team members. Strong skills in 2D and 3D AutoCAD. Ability to comprehend how things go together and to visualize in 3D. Work well with others since drawings require input and approval from various departments and shop personnel in order to complete the final approved drawings used for fabrication. Being a “team player” is a must. Produce expected drawings quickly, efficiently and as error-free as possible. Drawings should be thoroughly checked by the Senior Engineer or Engineering Manager before submission for any type of approval. Aggressively seek resolution from either the department head or other team members to prevent delays in the release of drawings. Creatively solve problems - displays often push the envelope and require solutions to problems which have no precedent. Calmly deal with numerous changes or “red-lines” to drawings Your Competencies Urgency - Decisive, responsive, and fast acting you achieve goals quickly both when working on your own and in collaboration with others. You demonstrate adaptability and agility when making on-the-spot decisions never sacrificing quality or work interactions. Cool under pressure. For the sake of time, you are able to eliminate unnecessary steps and use network resources to aid in project completion. Attention to Communication - Able to relate ideas to others in many forms (email, phone, in person) and ensure that all who need to be informed are kept in the loop, making sure no detail is left out. Provide ideas, options, and collaborate with the cross-functional team members. Thoroughness - Ensure your work (and if applicable, the work of others) is complete and accurate. You can spot when details were overlooked, and take the initiative to complete the project, following up to ensure agreements/commitments are on track or have been fulfilled. When details are ambiguous, you ask questions to confirm you understand the expectations. Team members can easily follow your work, understand where you left off, and what comes next. You are prepared and organized for meetings and presentations. Your Experience Experience & Education A minimum of 5 years of recent full-time 2D and 3D modeling, in Autocad and/or Inventor, in a work environment similar to our business, such as Architectural experience or another exhibit house. Ability to work extended hours, possibly weekends and holidays, during peak periods which occur frequently throughout the year. Strong levels of perseverance are needed to push through the very tough work schedule. A degree is not required for this position, but is always a plus. Architectural or Engineering degrees are the most relevant. Travel & Mobility Willingness and ability to travel infrequently (less than 5%) for site inspection, data capture and Engineering support Your Impact IIn your role, you will have influence and responsibility over construction drawings and assigned floorplans with influence over shop and PM success, CNC programming, project timelines and installation teams and schedule. Who We Are GPJ is the world leader in experiential marketing. Our 29 global offices are filled with fearless people dreaming up ideas that are transforming industries and bringing the most respected brands to life in powerfully, exciting ways. We are a part of the Project Worldwide family. An independent, employee-owned global network of complementary, wholly owned agencies. You read that “employee-owned” part, right? You heard us correctly. You work hard, she works hard, we all work hard… we all succeed and reap the rewards. We have an Employee Stock Ownership Plan (ESOP) - providing our employees with an ownership interest. We thought you would want to know that. In fact, there is a lot more you would want to know about us, like our FTO policy (no more “accruing” time off), our employer matching 401(k) plan (no vesting period), and our low contribution healthcare option. But we are getting ahead of ourselves here, let's talk about this exciting opportunity first and we can fill you in on our perks & benefits later. GPJ is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, citizenship, disability, protected veteran status, or any other protected class. In addition to federal law requirements, GPJ complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. GPJ expressly prohibits any form of workplace harassment based on any protected class.

Job Details Division: Nucor Rebar Fabrication Southwest Other Available Locations: N/A Basic Job Functions: Detail semi-complex rebar projects with supervision and provide concise, accurate and complete descriptions of all rebar, mesh wire, and related concrete reinforcing products for fabrication, delivery, installation, and invoicing in the most efficient manner possible. Increased diligence and accuracy than that required of a detailer trainee. Support efficiencies for our downstream teams/partners. Cultivate a customer focused reputation in our market while maximizing profits for Nucor Rebar Fabrication. * Create rebar shop drawings and coordinate deliveries of all contracted materials.• Build on basic knowledge of rebar & concrete reinforcing products.• Understand and use of industry standards such as CRSI & ACI. • Review and understand drawings, dates, specifications, addenda, and other contractual information.• Represent Nucor Rebar Fabrication & liaise between sales, estimating, placer, contractor, fabrication team, and all design disciplines.• Pre-plan all projects for critical path, scope, and schedules.• Review all document changes, generate change orders, and manage change order approvals.• Engage when design/construction conflicts arise and provide timely, cost-effective resolutions.• Perform other duties as required by your supervisor.Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.Minimum Requirements: * Legally authorized to work in the United States without company sponsorship now or in the future. * Ability to read technical drawings. * One year experience as a rebar detailer using CAD and Windows based software. Preferences: * Vocational certificate in CAD design/drafting issued from accredited school or currently enrolled.• Effective in verbal and written communication.• Construction knowledge - concrete related experience particularly helpful.Preferred Qualifications: * Extended hours may be required.• We are looking for candidates who are committed to a drug-free environment.• Working conditions include walking/sitting/standing/bending and moderate noise level.• Physical demands require use of hands, vision & light lifting related to computer equipment.• This position reports in-person at the Las Vegas, NV location.• May be asked to complete approximately two hours of assessments as part of the hiring process. Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Solutions Through Innovative Technologies, Inc. (STI-TEC) specializes in the delivery of professional business and information management services. STI-TEC offers government and commercial clients a comprehensive portfolio of services that identify, manage, distribute and improve business processes related to entities' most valued resource, information. As a fast-growing solutions provider, established in 2000, total customer satisfaction has remained the cornerstone of our business. Our business model focuses on integrity, loyalty, and trust. Position Overview The GIS & CAD Technician will assist the 432 Support Squadron Civil Engineer Flight to provide GIS and CAD services with minimal assistance associated with surveying work in support of the Installation Geospatial Information and Services (IGI&S). The GIS & CAD Technician will transpose/edit as-built CAD/image drawings to GIS datasets and update GIS data elements consistent with SDSFIE standards. CAD to GIS conversion will involve a variety of branches of engineering to include new building design, floor plans/structures, roadways/parking areas, land contours/drainage patterns, plumbing, heating, air conditioning, and electrical systems, etc. Essential Job Function May make site investigation and minimal survey work to verify and note details of existing conditions and requirements to ensure all features are reflected on completed drawings. Reconcile source data such as DD1354, RPAD, and other tabular data into the GIS system. Perform standard manipulations and adjustments to Image (such as PDF and TIFF), CAD and GIS files. Review tabular data and updates GIS layers as necessary. Demonstrate effective analytical, problem solving, communication and interpersonal skills. Demonstrate ability to be detail-oriented and thorough in reviewing data for accuracy. Communicate in a clear, timely, and professional manner. Minimum Qualifications AS or BS degree in Geography, Cartography, or Geographic Information Systems OR 4+ years of experience in applicable field. Secret Clearance Desired Qualifications Knowledge and experience in using AutoCAD Map 3D/Civil 3D, ArcGIS 10.6.x, Trimble GNSS equipment and Microsoft Office Suite (Word, Excel, Access). Ability to read blueprints is a plus. STI-TEC offers a competitive benefits package including: Medical, dental, and vision coverage Life insurance Short term/long term disability coverage Retirement savings - 401(k) Paid time off (PTO) Holiday leave Alternate work schedules (depending on work site) Flexible spending account options Whether you're an experienced professional, a veteran, a former military or civilian federal employee, or a recent graduate, STI-TEC has a career opportunity for you. Applicants selected may be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. STI-TEC is an equal opportunity employer and values diversity. Employment is decided on the basis of qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran status, gender identity and sexual orientation. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfer, leaves of absence, compensation and training. If you need assistance or an accommodation due to a disability, you may contact us at [email protected] or you may call us at 1+************. *This job posting is to identify potential candidates for positions in order to respond to a request for proposal. This job posting, including but not limited to, qualifications, duties, compensation and benefits, is subject to change based on the terms and conditions of the awarded contract and is contingent on STI-TEC being awarded the contract.

Job DescriptionDescription: At Elevation3D, we design, build, and deliver immersive brand experiences that bring ideas to life. As a full-service exhibit, event, and environment company, we specialize in creating custom trade show exhibits, experiential activations, and architectural installations for some of the most recognizable brands in the world. Position Overview: We are seeking a detail-oriented and experienced CAD Detailer to join our team. This role is critical in translating design concepts into precise technical drawings and 3D models used in the fabrication of trade show exhibits and custom environments. The ideal candidate will have strong AutoCAD skills, excellent spatial awareness, and a solid understanding of fabrication methods and trade show requirements. Job Type: Temporary, Full-Time (6-Month Assignment, with Potential for Full-Time Employment Based on Business Need) Requirements: Key Responsibilities: Create accurate 3D solid models and detailed layouts from design renderings. Produce comprehensive shop drawings for custom cabinetry, exhibits, and environments. Generate parts files for CNC router programming and production. Develop scaled floorplans, electrical layouts, and rigging plans for show services. Create step-by-step setup drawings for on-site installation teams. Collaborate closely with fellow detailers to maintain department timelines and workflow efficiency. Participate in internal design reviews and quality control meetings. Assist with department standards, block library management, and process improvement initiatives. Qualifications: Ability to work effectively in a fast-paced, deadline-driven environment. Willingness to work extended hours and weekends as needed for project deadlines. Highly detail-oriented, self-motivated, and organized. Strong communication and teamwork skills. Dependable and proactive with a strong work ethic. Comfortable working both independently and collaboratively within a team. Technical Skills: Proficient in AutoCAD 2020+, including 3D modeling with AutoCAD primitives and use of model/paper space. Skilled in Mastercam X9 or newer for generating parts files. Familiarity with be Matrix aluminum extrusion systems. Knowledge of trade show fabrication standards, production timelines, and utility drawing requirements. Please note that as part of our hiring process, all final candidates will be required to complete a comprehensive background check. This may include, but is not limited to, verification of employment history, education, criminal records, and other relevant information to ensure suitability for the role.

Your Role As a Gensler Designer with our team in Las Vegas, your job is to combine creativity and technical knowledge with business skills and understanding to produce functionally beautiful spaces for our incredible clients. With you as part of the team, our designs have never been so engaging. What You Will Do * Collaborate on interior architecture and interior design projects that include programming client needs, conceptual design, schematic design, design development, space planning, and management of budgets and schedules * Coordinate with Interior Designers, Project Architects and Project Managers to deliver project milestones * Provide project team coordination for finish plans, specifications, and material selections needed for construction * Provide design support and documentation during completion and execution of design concepts * Work with external consultants, product representatives, furniture dealers, consultants, and fabricators to meet overall project objectives * Assist in managing client expectations, team communication and consultant coordination * Establish and maintain ongoing, productive client relationships * Provide guidance, mentorship and training to teammates as needed Your Qualifications * Bachelor's degree in Architecture, Interior Design or Interior Architecture from an accredited program * 6+ years of relevant (interior architecture for hospitality) professional experience, ideally inclusive of all phases through construction administration * Proficient in Revit, SketchUp, AutoCAD, 3D and other modeling software programs * Strong knowledge of the design process, including FF+E, furniture systems and specifications, color and materials * Outstanding conceptual 3-dimensional thinking and graphic presentation skills to effectively communicate design ideas * Knowledge of Photoshop, Enscape, Illustrator, InDesign a plus * Flexibility to focus on concurrent projects in various stages of development * Ability to communicate design ideas and direction quickly * A quick learner with an ability to thrive in a fast-paced work environment * Strong leadership, organization, communication and relationship management skills * Demonstrated commitment to sustainability and sustainable building practices; If possible, portfolios should include at least one project (especially built projects with LEED, Living Building Challenge, WELL Building Standard, Fitwel, and/or Net Zero Building certification) with this particular focus, which we look forward to discussing during the interview * Licensed/Registered Architect, NCARB, LEED GA or AP preferred Design Technology at Gensler Applications we work with * Design Authoring - Revit, Rhino, Autocad, Navisworks * Collaboration - BIM360 * Computational Design - Grasshopper, Dynamo * Building Performance Simulation - Insight, Sefaira, Diva, Ladybug tools * Visualisation - Vray, Enscape, Twinmotion, 3DSMax * Graphics & Productivity - Adobe Creative Suite, Microsoft Office Suite * Experiential - Unreal Engine, Unity * Development - C#, Python The base salary will be estimated between $80,000 - $95,000 plus bonuses and benefits and contingent on relevant experience. To learn more about our compensation philosophy and full benefits offerings, please visit Great People, Great Rewards | Gensler Life at Gensler At Gensler, we are as committed to enjoying life as we are to delivering best-in-class design. From curated art exhibits to internal design competitions to "Well-being Week," our offices reflect our people's diverse interests. We encourage every person at Gensler to lead a healthy and balanced life. Our comprehensive benefits include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401k, profit sharing, employee stock ownership, and twice annual bonus opportunities. Our annual base salary range has been established based on local markets. As part of the firm's commitment to licensure and professional development, Gensler offers reimbursement for certain professional licenses and associated renewals and exam fees. In addition, we reimburse tuition for certain eligible programs or classes. We view our professional development programs as strategic investments in our future.

The job responsibilities of the Design Engineer include the following: Conceptualize from scratch AV systems designs for the client companies Interface & maintain ongoing dialogue for projects with Clients, Sales, CAD, and Tech Ops team members Provide documentation for quotes & bid packages detailing equipment, cost, labor estimates, pre -installation requirements, and site survey results Develop detailed Bill of Materials (BOM), detailed infrastructure drawings in CAD for architect, general contractor and electrical contractor use, and create final engineering drawings for rack layout, system wiring and custom plates or cabling assemblies Maintain awareness of emerging technology that can fit our client's budget without sacrificing quality or reliability The design engineer will be able to help in this area by: Assist in the preparation of consultant specified bids and submittals Assist and perform client site visits for initial surveys, ongoing technical assessment, and support for tech ops during integration, install, & commissioning Assist programmer with technical direction when developing user interfaces & control programs and be able to support Crestron or BSS programming. Create, and manage change orders to assist with maintain or increasing profitability on projects Assist with technical oversight, red lines, and design questions during integration & commissioning of systems Capture field mark ups and assist with generating As -Build drawings sets for the final design package Requirements What do we require from you? • CTS and/or CTS -D preferred • 5+ years' experience in AV systems design • A thorough, demonstrable understanding of systems integration techniques • Proven experience developing a detailed BOM for fully functioning AV systems designs • Skilled in the use of AutoCAD and Visio • Knowledge of or a desire to learn about networking systems design and operation • MS Office - able to use Excel, Word, PowerPoint, Access proficiently without training BenefitsAudio -Visual Recruiting Services by HireSparks, visit https://hiresparks.com/av -employers/