Computer aided design designer jobs in Riverside, CA

CAD Specialist - req1534 The Computer Aided Drafting Specialist is responsible for maintaining and developing Canon Medical Systems, USA (CMSU) Site Planning Department's technical drawing information and provide support for 3-dimensial equipment drawings. This position will work with CMSU's CAD Applications Specialist and Site Planning Management to ensure Site Planning personnel CAD training is up to date. Ensure all Site Planning technical documentation is current and reflect the most recent information received from the manufacturers. Perform all duties in accordance with the company's policies and procedures, all US state and federal laws and regulations, wherein the company operates. RESPONSIBILITIES This is a remote, home office role. NOTE:Tthe selected candidate must be near Tustin, CA location or Cleveland, OH location to attend onsite training for the first 90 days. * Develop and maintain Site Planning, CAD blocks, drawing templates, typical drawings and equipment planning specification sheets for Canon products ensuring all information is: accurate, clear, complete and in compliance with all standards and specifications. * Provide CAD training to the Site Planning Group to enhance planning skills and to maintain department drawing standards for all modalities with multi-layer drawings, paper/model space, embedded attributes, archiving, and plotting. * Support the Site Planning Department as requested in meeting or exceeding workload requirements in producing preliminary and final site plans for all modalities and ensure equipment information and specifications are correct and that there are no errors and omissions prior to distribution for CMSU equipment installations. * Compile and consolidate Canon Medical Systems Corporation (CMSC) engineering drawings and documents and convert it to the required drawing information formats utilized by CMSU for the Site Planning group. * Collaborate with CAD Applications Specialist to provide 3-dimensional drawing information to support Canon's Envision360 drawing platform. * Attend New Product Release (NPR) meetings as required for all modalities to assist Site Planning Modality Specialist with new product release to ensure necessary technical drawing information is provided to Site Planners. * Provide input to CAD Applications Specialist/Management for new computer hardware and software as appropriate to ensure that the equipment utilized by the Site Planning department is up to date and In line with industry standards. * Perform other duties as assigned. QUALIFICATIONS * Expert knowledge of Computer Aided Drafting, 3D Modeling and associative drawing software and hardware applications as well as proficient knowledge of construction practices. * Working knowledge of all Canon modalities or medical planning experience. * Strong leadership, interpersonal, organizational, and project management skills. * Proficient written and verbal communication skills. * Proven ability in developing and maintaining effective internal and external working relationships. * International and Domestic Travel required approximately 10% - 15% of the time. * AutoDesk Certification recommended * Pay Range $84K to $139K (DOE) * Must be near Tustin, CA location or Cleveland, OH location to attend onsite training for the first 90 days. #LI-LP1 #LI-remote About us! Canon Medical Systems USA, Inc., a world leader in diagnostic imaging, is in search of qualified candidates to fill our open positions. Canon Medical Systems offers a competitive salary and benefits package, we support a diverse workplace and are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, sex, color, sexual orientation, gender identity, religion, national origin, protected veteran status, or on the basis of disability. We invite you to join and become part of our Canon family.

California Baptist University ( CBU ) invites nominations and applications for the position of Dean, College of Architecture, Visual Arts + Design ( CAVAD ). Founded in 1950, California Baptist University is a private comprehensive institution located in Riverside, California. Accredited by the WASC Senior College and University Commission ( WSCUC ), CBU offers more than 100 majors, more than 30 graduate degree programs and seven doctoral degrees. Affiliated with California Southern Baptist Convention, CBU is a member of the Council for Christian Colleges and Universities, the Association of Independent California Colleges and Universities and the International Association of Baptist Colleges and Universities. For more information about the university, visit this page ***************************** CAVAD is an established multi-faceted design college dedicated to the integration of Christian thought and practice, cutting-edge design pedagogy, and reflective professional practice. As one of the largest Christian art and design colleges in the United States, CAVAD embraces the entire spectrum of art and design-oriented disciplines where students experience an interdisciplinary approach to learning that offers unique and unlimited opportunities for collaboration, inspiration, and most importantly, a deep and well-rounded education rooted in the Christian worldview. With strong growth in student numbers and program offerings, CAVAD consists of 9 academic programs, 23 faculty, 3 support staff, and approximately 600 students. For further information about the college, please see cavad.calbaptist.edu Position Description. The Dean of the College of Architecture, Visual Arts + Design is the chief academic officer and the administrative head of the school. The Dean holds academic rank and is charged with the administration, academic leadership, and supervision of the operation of the school through its instructional programs, research, publications, and service activities. This administrator must be a visionary who has the demonstrated ability and entrepreneurial mindset to execute a strategic plan. The Dean reports directly to the Provost/Senior Vice President for Academic Affairs and serves on the Provost's Council. Qualifications Required qualifications include 1) A demonstrated mature Christian faith aligned with CBU's foundation as a Christian institution committed to the Great Commission, 2) demonstrated experience and knowledge of integrating Christian faith with the theory and practice of art, design, or creativity, 3) an earned terminal degree from an accredited institution in a field related to the work of CAVAD , 4) progressive administrative experience in higher education, 5) knowledge of accreditation bodies, 6) an outstanding record of leadership and service to the community, and 7) an outstanding record of academic activities including university teaching, research, retention, fiscal management, strategic planning, and enthusiasm and the ability to contribute to substantial development and fundraising efforts. The successful candidate is expected to assume duties July 1, 2024.

As an CAD Designer, Your main responsibility is to take 2D design concepts into 3D CAD files. You will work with Industrial designers from Bell, Camelbak, Fox Racing & Giro, to bring concepts to reality. You will be responsible for organic A-side surfacing, while working closely & cross-functionally with the Engineering team to integrate engineering parameters, parts and components. **Essential Functions of this Role:** The essential duties and responsibilities of this position include, but are not limited to: + Execute the 3D CAD design of complete products for all aspects inside and out, including but not exclusive to their function, aesthetics, usability, and comfort. + Create surfaces that respect the visual language of the brand, while contributing to their evolution. + Provide solutions to design issues through a clear understanding of user and market needs + Deliver CAD files which supply development, engineering & manufacturing partners with information required to understand & and commercialize the intended product. + Working closely with product development, ensure that the margin and timeline targets of each product are achieved. + Actively engage in research of target market, industry competitors, and cultural trends. + Understand and design to the certification standards of each product category. + Assist product development in the commercialization of products through changes and tech packs. **Competencies:** + Proven CAD Expert in either, Rhino, Alias, Blender, Solidworks, Catia, or similar modeling software. + Excellent visual communication skills and demonstrated ability to create highly sculptural forms through products that have been brought to market or in personal projects + A deeply enthusiastic attitude towards the Action Sports industries + A self-starter who is able to execute based on company priorities and multiple project timelines **Work Environment:** + This job requires employees to be in the corporate offices in Irvine CA, 3 days per week. **Physical Demands:** + Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or other move objects, including the human body. + Constantly operates a computer and other office productivity machinery **Expected Hours of Work:** + May be required to work more than 8 hours during a workday. **Travel** : + Domestic and International travel to vendor visits, trade shows, sales events, etc. as needed. **Required Education, Experience and Skills:** + Exceptional surfacing skills in 3D CAD + **3-5 years experience in Helmet Design.** + A working knowledge of material properties, manufacturing processes and product development + Proficiency in the Adobe Creative Suite software packages and Microsoft Office **Minimum Education Required** + Bachelors **Years of Experience** + 3-5 **Pay Range:** Annual Salary: $100,000.00 - $120,000.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, paid holidays, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled **Revelyst is a collective of makers that design and manufacture performance gear and precision technologies. Our category-defining brands leverage meticulous craftsmanship and cross-collaboration to pursue new innovations that redefine what is humanly possible in the outdoors. Portfolio brands include Foresight Sports, Bushnell Golf, Fox, Bell, Giro, CamelBak, Bushnell, Simms Fishing and more.** Revelyst is an equal opportunity employer. All applicants are considered for employment without regard race, color, religion, sexual orientation, gender identity, national origin, disability, veteran status, and any other characteristics protected by law. The EEO Law poster is available here: **************************************************************** If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to ******************** . Please note that this email address is for accommodation purposes only. Revelyst will not respond to inquiries for other purposes.

As an CAD Designer, Your main responsibility is to take 2D design concepts into 3D CAD files. You will work with Industrial designers from Bell, Camelbak, Fox Racing & Giro, to bring concepts to reality. You will be responsible for organic A-side surfacing, while working closely & cross-functionally with the Engineering team to integrate engineering parameters, parts and components. Essential Functions of this Role: The essential duties and responsibilities of this position include, but are not limited to: Execute the 3D CAD design of complete products for all aspects inside and out, including but not exclusive to their function, aesthetics, usability, and comfort. Create surfaces that respect the visual language of the brand, while contributing to their evolution. Provide solutions to design issues through a clear understanding of user and market needs Deliver CAD files which supply development, engineering & manufacturing partners with information required to understand & and commercialize the intended product. Working closely with product development, ensure that the margin and timeline targets of each product are achieved. Actively engage in research of target market, industry competitors, and cultural trends. Understand and design to the certification standards of each product category. Assist product development in the commercialization of products through changes and tech packs. Competencies: Proven CAD Expert in either, Rhino, Alias, Blender, Solidworks, Catia, or similar modeling software. Excellent visual communication skills and demonstrated ability to create highly sculptural forms through products that have been brought to market or in personal projects A deeply enthusiastic attitude towards the Action Sports industries A self-starter who is able to execute based on company priorities and multiple project timelines Work Environment: This job requires employees to be in the corporate offices in Irvine CA, 3 days per week. Physical Demands: Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or other move objects, including the human body. Constantly operates a computer and other office productivity machinery Expected Hours of Work: May be required to work more than 8 hours during a workday. Travel: Domestic and International travel to vendor visits, trade shows, sales events, etc. as needed. Required Education, Experience and Skills: Exceptional surfacing skills in 3D CAD 3-5 years experience in Helmet Design. A working knowledge of material properties, manufacturing processes and product development Proficiency in the Adobe Creative Suite software packages and Microsoft Office Minimum Education Required Bachelors Years of Experience 3-5 Pay Range: Annual Salary: $100,000.00 - $120,000.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, paid holidays, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled

Benefits: 401(k) Bonus based on performance Dental insurance Health insurance Paid time off Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job SummaryAdrenalin Attractions is seeking a CAD & Fabrication Specialist to join our team! In this role, you'll be responsible for optimizing designs for fabrication and production, developing detailed 2D and 3D models, and overseeing digital fabrication processes-including CNC operations and 3D printing. You'll work closely with project leads to coordinate and streamline workflows across departments. The ideal candidate brings expertise in CAD and CAM software such as Rhino, SolidWorks, Fusion 360, and more, with experience in CNC programming and fabrication planning. A background in themed fabrication is highly preferred. Strong leadership, clear communication, and the flexibility to work overtime in a fast-paced, team-driven environment are essential. Responsibilities / Requirements MUST HAVE EXPERIENCE IN THEMED FABRICATION AND/OR CONSTRUCTION. 1. CAD Modeling & Technical Drawings Serve as the primary CAD designer, creating 2D and 3D models for awarded projects. Develop fabrication-ready models from scratch based on project specifications and input from leads and managers. Ensure all CAD work aligns with manufacturing feasibility and project requirements. Oversee the organization and management of CAD files, ensuring accessibility and proper documentation. 2. Digital Fabrication & 3D Printing Manage all 3D printing operations, including modeling, file preparation, printing, post-processing, and machine maintenance. Ensure 3D prints meet quality standards and are optimized for functionality. Oversee the maintenance and troubleshooting of 3D printers to ensure continuous operation. 3. Fabrication Planning & Method Development Determine primary fabrication methods for each project based on discussions with managers and leads. Direct the fabrication shop technician and assistant CAD draftsman to execute fabrication strategies efficiently. Collaborate with project leads to establish efficient and cost-effective production workflows. 4. CNC & CAM Programming Run CAM operations and program toolpaths for CNC machines, including the CNC router, hot wire, and Frog Mill. Assist in CNC machine troubleshooting, setup, and operation during peak workload periods. 5. Equipment Maintenance & Oversight Ensure all digital fabrication machines (CNCs, 3D printers, and hot wire cutters) are properly maintained and running efficiently. Coordinate repairs and servicing for CNCs, 3D printers, and other digital fabrication equipment as needed. 6. Project Leadership & Team Coordination Act as the initial point of contact for all CAD-related work, ensuring all projects start with properly developed CAD files. •Oversee and guide the assistant CAD draftsman and fabrication team on technical execution. Become familiar with the previous Director of Projects' role to transition into key responsibilities over time. Be prepared to work overtime when necessary to ensure projects meet deadlines. 7. Software & Workflow Management Ensure all CAD, CAM, and fabrication processes are carried out using Fusion 360, with occasional use of Revit and Rhino. Maintain an organized workflow to optimize CAD-to-fabrication processes and reduce errors. Qualifications Previous experience with Solidworks, Fusion 360, or AutoCAD Advanced proficiency in Solidworks (primary software) Excellent written and verbal communication skills The ability to work well within a team environment Proven ability to lead a team of CAD draftsmen and fabrication technicians, providing guidance and support. Experience with GD&T preferred 10+ years of experience in CAD modeling, digital fabrication, and CNC machining, preferably in a themed fabrication, experiential design, or manufacturing environment. Strong understanding of manufacturing/fabrication processes, materials, and fabrication feasibility. (preferably in themed fabrication) Experience with 3D printing operations, including file preparation, printing, and post-processing. Hands-on experience with CNC machining and CAM programming (CNC router, hot wire, Frog Mill) Knowledge of fabrication planning, workflow optimization, and cost-effective production strategies Ability to work overtime as needed to meet project deadlines Additional Preferred Skills Experience with surface or character modeling Experience with 3D slicer software for 3D prints Other skillsets or familiarity associated with fabrication for themed entertainment Bachelor's degree in Mechanical Engineering, Industrial Design, Architecture, or a related field, or equivalent experience. Compensation: $70,000.00 - $100,000.00 per year You Dream...We Theme Adrenalin Attractions is a US based fabrication and entertainment technology company serving all sectors of the hospitality industry including theme parks, museums, hotels, and everything in between, including high-end residential. Our “You Dream…We Theme” trademarked slogan was coined when a customer told us how impressed they were that we can fabricate nearly anything they dream up! Join our growing team and help bring our clients concepts to life in an energetic and fun corporate atmosphere.

Under general supervision, the CAD Designer II will support the engineering team in designing and supplying material handling systems, including unit/package handling, bulk material handling, and automated conveying solutions. The role involves translating engineering concepts into detailed CAD drawings, layouts, and digital models to support project execution. The successful candidate will collaborate closely with engineers, project managers, production, and sales teams to create accurate, constructible designs and ensure seamless project delivery. JOB DUTIES: Design Support: Develop detailed CAD drawings, layouts, assemblies, and digital models of material handling systems such as unit/package conveyors, bulk material handling equipment, and automated solutions. Collaborate with Mechanical Engineers to translate design concepts and field data into accurate engineering drawings adhering to customer requirements and industry standards. Prepare bills of materials (BOMs) and assist with maintaining design documentation and revision control. Customize CAD models to represent complex or non-standard components and integrate automated equipment interfaces where applicable. Create prototypes and conduct digital simulations to verify design feasibility and support engineering validation. Utilize 3D point cloud scanning data to create and refine accurate 3D models, ensuring precise representation of existing site conditions and equipment layouts. Use software tools such as Autodesk ReCap to process and manage point cloud data for integration into design workflows. Project Assistance: Support project coordination by providing timely and accurate CAD deliverables for multiple concurrent projects. Assist with site measurement data consolidation and incorporation into designs. Help track project documentation status and update drawings as engineering changes occur. Collaboration: Interface with engineers, production, purchasing, and sales teams to clarify design details, resolve technical questions, and ensure alignment of CAD outputs with project goals. Communicate effectively to provide technical clarifications and updates to stakeholders. Continuous Improvement: Identify opportunities to enhance CAD drafting standards, template libraries, and workflow efficiencies. Stay up-to-date with CAD software advancements and new tools relevant to material handling system design. EDUCATION & EXPERIENCE: High school diploma or GED required; Associate's degree, technical diploma, or post-secondary coursework in CAD, drafting, or a related field preferred. 5+ years of experience in CAD drafting/design supporting mechanical engineering projects in material handling and industrial automation systems. Proficiency in CAD software such as AutoCAD and Autodesk Inventor. Experience in handling 3D point cloud scanning data and using Autodesk ReCap or for processing scan data and integrating it into 3D modeling. Familiarity with creating engineering drawings, layouts, assemblies, and BOMs for mechanical systems. Basic understanding of material handling equipment and components is required. Ability to read and interpret engineering drawings and specifications. KNOWLEDGE, SKILLS & ABILITIES: Strong attention to detail and high-quality output standards. Good problem-solving skills and ability to collaborate within a cross-functional team environment. Excellent communication skills, both verbal and written. Ability to manage multiple projects and deadlines concurrently. PHYSICAL DEMANDS: May require site visits for field measurements and coordination with engineering staff. Work performed in both office and field environments, requiring adaptability to different working conditions. LICENSES & CERTIFICATIONS: None specifically required. Certification in CAD software or drafting is beneficial. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition, reimbursement, vacation, sick, and holiday pay. Please keep in mind that this range is the base pay only and does not consider other components that make up the total rewards package for the position. If you are hired at Motion, your overall compensation will be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Compensation is from $68,000 to $88,000 annually Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Are you passionate about design and fascinated by crafting top-tier custom industrial machinery and automation systems? Join our team of engineers dedicated to delivering excellence to our esteemed clientele! Responsibilities: * Develop intricate part and assembly models using SolidWorks 3D CAD * Design components to meet manufacturing specifications, including sheet plastic routing, fusion welding, sheet metal bending, waterjet cutting, CNC machining, and more * Create and refine production engineering drawings (assemblies, components, layouts) ensuring timely delivery within budget * Collaborate closely with production teams, aligning designs with fabrication and assembly processes for efficient manufacturing * Generate and manage bills of materials for mechanical assemblies * Maintain meticulous organization of CAD files using SolidWorks Product Data Management system for file storage, revisions, and lifecycle management * Actively engage in Design Reviews to optimize design concepts * Conduct thorough checks on drawings prepared by Engineers and other Designers to ensure compliance with design standards and best practices

Advantage Resourcing provides workforce recruiting and placement services. As one of the world's leading staffing companies, our primary objective is clear-cut: To perfectly align the best people with appropriate positions around the globe. Through contingent, contract and direct hire services, the specialized recruiters at Advantage Resourcing place career-minded people in a wide variety of jobs in different fields. Advantage Resourcing offers a number of services to help you find the job for you. Regardless of the career stage you may be in-identifying work interest, searching for that first job, looking to take the next step-Advantage Resourcing can help you discover the personal and career success you desire. Job Description Loooking for a CAD Designer In Anaheim, CA- Metal fabrication company. Great Opportunity! Direct Hire. Responsibilities and Duties: Create sheet metal flat patterns using Pro-Engineer, Autodesk Inventor, and AutoCAD. Verify accuracy of flat patterns using manual calculations. Create Engineering Change Orders, submittals, and GA drawings. Work closely with fabrication contractors. Design and redesign new and existing air moving equipment utilized in the chemical, petrochemical, power, waste water treatment plants, heating and cooling, power generation, mining and marine application, and many other industrial applications. Using AutoCad or SolidWorks create design layouts, drawing detailing, and assembly drawings. Prepare layout and manufacturing detailed prints using SolidWorks. Retrofit old and new equipment including competitors, as long as it meets and serves customer's needs. Develop and update designs for special build product. Prepare customer assembly drawings. Generate 2D and 3D sales drawings and submittal data. Develop customer sales drawings and models for approvals. Review returned approval drawings and implement necessary changes. Perform VA/VE activities to optimize design for improving manufacturability and take cost out from current legacy product. Create bills of materials for new orders. Generate machine layout drawings and files. Assist production personnel with any drawing or fit up issues. Additional Information Company Perks- As an Advantage Resourcing employee, you will also receive great benefits, including:  Optional health benefits, including medical, dental, vision, and group life insurance.  Competitive weekly pay

Job Description Implant CAD/CAM Designer (3Shape) Salary Range: $30-$45/hour (Hourly, DOE) Employment Type: Full-Time, In-Person Only About the Laboratory: Join a well-established, fully digital dental laboratory with over 100 team members. We focus on high-quality, patient-specific restorations with a strong emphasis on cutting-edge digital workflows and implant solutions. Position Summary: We are seeking a highly experienced Implant Designer to join our implant department. The ideal candidate is a skilled 3Shape designer capable of handling a wide variety of implant-related cases with minimal supervision. Key Responsibilities: Design implant abutments and crowns using 3Shape (strongly preferred) Ensure implant case requirements are accurately executed Review doctor prescriptions and clinical case notes Communicate technical concerns or suggestions for alternative solutions to the internal customer service team Design across a range of implant systems (e.g., Nobel, Straumann, etc.) Optional (preferred but not required): All-on-X designs and surgical guides Requirements: At least 2+ years of direct experience designing implant cases in 3Shape Proven ability to design both abutments and final restorations Strong understanding of implant workflows, systems, and case planning Excellent attention to detail and ability to manage complex cases Comfortable working independently at a computer-based station Strong communication skills to support internal coordination with customer service Preferred but Not Required: Experience designing All-on-X or full arch restorations Knowledge of surgical guide design Experience with Exocad Compensation & Benefits: Hourly pay between $30-$45/hour (based on experience) Medical, dental, and vision insurance (company-sponsored) 401(k) plan (non-matching) Potential bonus or productivity-based pay options (e.g., piece rate depending on role) Opportunity for long-term growth and career development within a well-respected lab Important: This is an on-site position. Remote or hybrid work is not available. Initial interviews may include a remote design test; finalists may be invited on-site.

Gray AES is looking for an Architecture Design Manager- Life Science Market to join our team in our Fullerton, CA office. Responsibilities Why Gray AES? Gray is a family-owned, fully integrated global service provider specializing in engineering, design, construction, digital, equipment manufacturing, and real estate services. Deeply rooted in EAC services, Gray serves both domestic and international customers across our core markets: Food & Beverage, Manufacturing, Automotive, Distribution, Mission Critical, and Commercial. At Gray, our purpose is to make a positive difference in people's lives and build a better future. Gray AES, the professional services arm of Gray, is a top-ranked firm offering architecture, engineering, and automation services across the globe. Made up of multidisciplinary teams of architects, engineers, and project managers, these collaborative teams work every day to provide unique, customized solutions for our customers. It's the spirit of our people - the passion, commitment, and a great team environment - that makes our company a great place to work. Visa Sponsorship: This role is not eligible for visa sponsorship. Who we want… Bachelor's degree from four-year college or university; degree from a technical college; or minimum of seven years related experience and/or training; or equivalent combination of education and experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet, e-mail and Revit applications. May require knowledge of applications specific to the project assigned. Must also possess excellent communication and interpersonal skills. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray AES is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications What we expect… * Review design proposal criteria and facilitate preparation of proposal documents for use by construction personnel, subcontractors, and vendors. * Provide research regarding the project design, along with applicable code and regulatory requirements. * Consults with customer to determine functional and spatial requirements of new structure or renovation, and prepares information regarding design, specifications, materials, color, and equipment. * Prepares the layout of project and integrates engineering elements into unified design for customer review and approval. * Responsible for quality assurance and quality control of design documents for all design disciplines including but not limited to review of documents prepared by Architectural Technicians, sub-consultants and design-build subcontractors. * Prepare and administer design contracts with the customer and/or sub-consultants. * Facilitate design reviews and presentation of current design documents for customer review and approval. * Coordinates design activities with customers and Gray AES sub-consultants. * Facilitate the preparation of schematic, design development, and construction documents and manages construction administration activities for the project. * Develop a design schedule and estimate of A/E costs for projects. * Monitor project design activities to assure compliance with Gray AES standards and procedures. * Manage all administrative tasks related to design for the project. * Manage all costs related to design activities to ensure accurate cost control. * Other duties may be assigned. The wage range for this role takes into account a wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; as well as other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $90,000 to $140,000. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime will be required. Some travel will be required. Supervisory Responsibilities May supervise 1 to 3 team members such as Architectural Technicians and Assistant Design Managers. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training team members, planning, assigning, and directing work; provides input for appraising performance; rewarding and disciplining team members; addressing complaints and resolving problems. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #GrayAES #LI-TK1

This position is responsible for delivering drafting and support services to the sales department. The primary accountabilities include the timely and accurate production of drawing sets for sales and construction purposes. Document management and engineering support is also required. **Responsibilities** + Work with senior engineering and sales staff to provide comprehensive drawing sets. + Produce detailed layout drawings utilizing supermarket construction methods. + Correspond with field installation personnel to continually improve design concepts. + Apply knowledge of applicable codes in the development of project drawings. + Maintain organized job files and supervise archiving of documents. + Develop and maintain drafting standards. + Follow document/drawing management procedures to ensure proper document control maintained. + Assure that proper review processes are followed prior to the release of documents. + Assist senior engineering staff and the sales department in the creation of proposal and bid documents. + Interface with factory personnel to obtain submittal and design data for manufactured equipment. + Assist the engineering staff with load calculation, line sizing and equipment specification. **Qualifications** + A two-year technical program certificate or 5 years of industry experience. + Knowledge of supermarket refrigeration systems. + Able to travel for site surveys and project reviews. + Strong computer skills, proficient in Excel and CAD & Revit. + Excellent verbal and written communication skills with the ability to converse with sales personnel, engineers/architects, vendors, trade representatives and customers. + Able to apply knowledge and experience to the design of industrial refrigeration systems. + Creatively integrate CAD skills into diverse industrial designs + Enthusiastically supports the sales and service staff + Actively seeks to discern and understand the needs of the organization + Able to effectively promote IR/Hussmann solutions to the client + Able to plan work for multiple projects + Ensure the timely completion of work thru planning + Set priorities and manage multiple tasks + Listens carefully and speaks openly + Able to explain solutions in a clear and concise manner + Seeks to improve overall understanding by open communication + Able to thrive in a team environment + Actively accept responsibility and participate in achieving a common goals + Works to remove roadblocks from the process + Able to learn new methods and applications to improve CAD capacity + Continually update and improve CAD skills **Closing date: January 15, 2026** The salary or hourly range of $ $20.57-$38.20 is just one component of Hussmann's total package. Actual compensation varies depending on the individual's knowledge, skills, experience and location. This role may be eligible for discretionary bonuses and incentives. The minimum hourly wage for this role will be the greater of the posted range, or minimum wage for the location where the employee will be working, subject to local minimum wage requirements. **Benefits & Perks - What's In It For You*** Hussmann is committed to supporting your total wellbeing through a wide variety of benefits and wellness programs to support your physical, emotional, financial, social, and environmental health. Here's what you can expect: + **Health Benefits** - Offering medical, dental, vision, prescription plans, plus Health Savings Account and Flexible Spending Account options. + **Voluntary Benefits** - Life, accident, critical illness, disability, legal, identity theft, and pet insurance. + **Hussmann Retirement Savings & Investment Plan** - 401(k) plan with company matching contributions and immediate vesting. + **Paid Time-Off Benefits** - Paid time off, stewardship and parental leave. + **Educational Assistance** - Tuition reimbursement for job-related courses after six months of service. + **Health Management and Wellbeing Programs** -EAP, virtual health management, chronic condition, and tobacco cessation. *Available to eligible employees starting the first day of the month following their start date. Eligibility for each benefit may vary based on employment status. **About Hussmann** For over a century, Hussmann Corporation has been a global leader in commercial refrigeration equipment - delivering solutions that meet the demands of the modern food retailing industry. Headquartered in St. Louis, MO, Hussmann offers a diverse range of products and connected solutions designed to enhance operational efficiency, optimize visibility of merchandise, and keep food fresh. With a nationwide network of skilled technicians, Hussmann goes beyond manufacturing - a trusted partner, relentlessly driving customer success. For more information about Hussmann, please visit **************** . Hussmann is a subsidiary of Panasonic USA. Hussmann is proudly committed to creating an inclusive environment. All qualified applicants will receive consideration for employment without regard to veteran status, disability, age, race, color, religion, sex, national origin, genetics, medical condition, or any other characteristic protected by law. \#LI-SM1 REQ-153308

Qualifications An ideal candidate would possess the following qualifications: * *Must be willing to travel. 80% * *Must be able to work in a collaborative fast-paced environment. * *Knowledge in the use of Total Station robotic instrument used to collect topographic data, produce drawings, and perform site layouts. * *Drafting experience in Surveying (LiDAR, GPS, Total Stations) (Surveying equipment: Trimble, Carlson). * Experience using 3D laser scanner (Leica RTC 360) and scan rendering software (Register 360). * *Produce 2D drawings using AutoCAD and/or Civil 3D software. * Drone operating experience. * Bilingual in English and Spanish * = Requirements for position. NOTE: Items without a "*" are not required, but they are preferred. Candidate can be trained in those sections if they are hired. Responsibilities The primary responsibilities of the employee include: * Assist engineering department in retrieving field data, measurements, and other information to produce 2D drawings for structures, assemblies, site plans, and utilities in AutoCAD or Civil 3D format. * Perform site and building surveys. * Produce drawings from field recovered data and surveys under the direction of the engineering department. * Generate diagrams demonstrating the order of process equipment. * Superimpose 2D drawings from engineering team over surveys to identify potential conflicts with existing structures and equipment. * Generate shop drawings of designs made by engineering team. * Scan facilities using the 3D laser scanner and then processing the data using Register 360software. * Create scaled aerial photographs of facilities using a drone. Physical Requirements * Work Environment: Scarp metal yard, outdoor. * Equipment & Tools: Yard equipment, hand tools, and PPE. * Physical demand level: Moderate to heavy. * Work capacity: Laborer work capacity. * Hand Movements: Repetitive motions. $75,000 - $88,000 Depending on experience

Qualifications An ideal candidate would possess the following qualifications: • *Must be willing to travel. 80% • *Must be able to work in a collaborative fast-paced environment. • *Knowledge in the use of Total Station robotic instrument used to collect topographic data, produce drawings, and perform site layouts. • *Drafting experience in Surveying (LiDAR, GPS, Total Stations) (Surveying equipment: Trimble, Carlson). • Experience using 3D laser scanner (Leica RTC 360) and scan rendering software (Register 360). • *Produce 2D drawings using AutoCAD and/or Civil 3D software. • Drone operating experience. • Bilingual in English and Spanish *= Requirements for position. NOTE: Items without a “*” are not required, but they are preferred. Candidate can be trained in those sections if they are hired. Responsibilities The primary responsibilities of the employee include: Assist engineering department in retrieving field data, measurements, and other information to produce 2D drawings for structures, assemblies, site plans, and utilities in AutoCAD or Civil 3D format. Perform site and building surveys. Produce drawings from field recovered data and surveys under the direction of the engineering department. Generate diagrams demonstrating the order of process equipment. Superimpose 2D drawings from engineering team over surveys to identify potential conflicts with existing structures and equipment. Generate shop drawings of designs made by engineering team. Scan facilities using the 3D laser scanner and then processing the data using Register 360software. Create scaled aerial photographs of facilities using a drone. Physical Requirements • Work Environment: Scarp metal yard, outdoor. • Equipment & Tools: Yard equipment, hand tools, and PPE. • Physical demand level: Moderate to heavy. • Work capacity: Laborer work capacity. • Hand Movements: Repetitive motions. $75,000 - $88,000 Depending on experience

Job Description AVANTI RESTAURANT SOLUTIONS IS HIRING A DESIGN DRAFTER Are you looking for a work environment where you can collaborate with other colleagues who are genuine and have a drive to succeed? Are you able to work under pressure to meet deadlines? Would you enjoy working in an in-house Design Studio specifically to help clients realize their culinary vision? Would you enjoy learning about new products, so you can develop into an industry expert? If this resonates with you, please apply at Avanti Restaurant Solutions for the position of Design Drafter. Avanti Restaurant Solutions, a successful, privately held, $100M+ company, is looking for a design drafter. Responsible for working within a collaborative team, a Design Drafter's duties and responsibilities are intended to support the design efforts of the in-house Design Studio on a wide variety of projects. Please apply if you have the following skills: Proficient in AutoCAD with knowledge of Revit preferred Possess strong communication skills, both written and verbal Organized and detailed oriented Able to collaborate with internal teams and customers in a highly professional manner Able to work in a fast-paced growing department Food service background and/or construction industry preferred Day to Day Responsibilities: Work alongside project lead to create foodservice drawings Assist in design meetings Create MEP coordination drawings Grow industry knowledge through yearly factory training The is a full-time, non-exempt position. Compensation: $21.00 per hour to $38.00 per hour Location: Irvine, CA

EKN Engineering is fast-growing civil engineering and technology consulting company located in Irvine, CA. In order to hit our growth goals, we are now hiring an entry level drafter to join our engineering team. In addition to the drafting duties, you'll also be responsible for keeping company records up to date for progress on your assigned workload. Requires understanding of basic AutoCAD drafting of plan views, redline processing, good written and oral communications skills, and a proficiency in Microsoft Office 365 Products. The ideal candidate will have the ability to multi-task, work cross-functionally and globally. Responsibilities: Responsible for providing CAD drafting support services. Perform skilled drafting work in preparing preliminary and final engineering drawings, plans, maps and exhibits. Transform initial rough product designs using CAD software into working documents. Review engineering drawing and designs to ensure adherence to established specifications and standards. Rely on instructions and pre-established guidelines to perform the functions of the job. Must become proficient with company CAD organizational systems and standards. Produce finished drawings from preliminary design sketches and instruction provided by design staff. Address plan check comments including basic plan view level comments, editing text, editing attributes, etc. Use existing information to prepare composite exhibits and plans. Perform other miscellaneous duties as required such as research and construction document scans and copies. Required Qualifications: 1+ years of professional AutoCAD experience is preferred but not required. Education and training equivalent to a high school education plus two years of technical or trade school training; preferred course work includes engineering, mechanical drafting, AutoCAD, algebra, geometry, trigonometry and surveying. Work experience as a Drafter or similar role is a plus. Preparation of drawings to company and / or client standards Why Join Us: At EKN Engineering, you'll be part of a company that values innovation and accountability and supports our employees' professional growth and personal development. Here, you'll work with teams that push the boundaries of engineering to create solutions that enhance our communities and the environment by making utilities safer. Benefits & Perks 100% Company-Paid Medical, Dental, Vision, and Life Insurance - Comprehensive coverage to support your health and well-being. 401(k) with Company Match - We invest in your future with a dollar-for-dollar match on contributions. Flexible Spending Account (FSA) - Set aside pre-tax dollars for qualified healthcare and dependent care expenses. Exclusive Employee Discounts - Access our BenefitsHub for savings on travel, rental cars, hotels, theme parks, and more. Monthly Catered Lunches & Daily Office Snacks - Enjoy a well-stocked kitchen and regular team meals to keep you fueled throughout the day. Employee Engagement & Wellness - We value connection and balance. Our team enjoys a variety of events and activities throughout the year, including hiking outings, summer BBQs, sports games, holiday celebrations, and dedicated team-building days. JOYA Health Membership - Access to over $1,000 in annual skin health and wellness benefits, including complimentary facials or peels, aesthetic service credits, priority skin cancer screenings, teledermatology services, and discounts on skincare products. Wellness Perks & Support Programs - Access a variety of wellness resources including discounted gym memberships through One Pass, mental health and self-care tools via AbleTo and Calm, and monthly rewards for healthy activities through Rally. Public Warning: Recruitment Phishing Scam Impersonating EKN Engineering EKN Engineering has become aware of a phishing scheme targeting individuals with fraudulent interview requests and job offers. EKN's secure IT systems and private applicant information have not been compromised; scammers are impersonating EKN employees, using the company name and branding to mislead and engage potential job seekers in fake recruitment processes. Scammers might reference real job openings or describe fake opportunities that generally match individuals' professional backgrounds, with the goal of establishing communication and eventually obtaining private financial information to defraud people. The Federal Bureau of Investigation and Federal Trade Commission warn that employment scams such as this are a growing cyber threat. EKN urges anyone who is contacted about employment opportunities to exercise caution and know that: All communication from EKN Engineering will be from an EKN employee using the @eknengineering.com email domain. We do not use third-party recruiters. EKN Engineering recruiters will only schedule interviews for candidates who have applied for a position through our secure portal. No corporate or IT systems at EKN are affected by this scam. The scammers are using EKN's logo and employee names to impersonate the company. You can directly contact us at ************************** with any questions or concerns. EKN is committed to ensuring the safety and security of our community. We caution individuals to be vigilant in protecting personal data and vetting communication with new contacts from any company. Do not respond or provide any personal information if contacted by someone claiming to represent a company to which you did not submit a job application or profile. This scam can be perpetrated against any business and individuals who recognize and trust its name. For information on EKN recruitment practices and policies, please visit our career page or email ***********************************. To report a scam, visit: *****************************

Our Ontario team is looking for a skilled CAD drafter to join the team. This person will play a crucial role in the design and development process, collaborating with the manufacturing team and sales department. The right candidate will have a keen eye for detail, ability to work in a fast-paced environment, high proficiency in CAD software (AutoCAD & SolidWorks), and a desire to jump in and support our rapidly expanding Pipe Supports division. Job Purpose: Prepare technical CAD drawings for assigned projects. Job Responsibilities Creating Technical Drawings: Drafting precise technical drawings, plans, and diagrams using CAD software based on specifications provided by engineers, architects, or designers. Detailing and Annotations: Ensuring that drawings are accurately detailed, annotated, and dimensioned to convey necessary information for construction or production Collaboration: Collaborate with sales and manufacturing teams to understand project requirements and incorporate design changes as necessary. Quality Assurance: Review drawings for accuracy, completeness, and adherence to industry standards and project requirements. Project Analysis: Revise and update existing drawings reflecting design changes. Material Takeoffs: Assisting in material takeoffs and quantity surveys to support project estimation and procurement processes. Qualifications Proficiency in CAD Software: Expertise in using CAD software (AutoCAD and SolidWorks) with a strong understanding of drafting principles and techniques. Technical Knowledge: Understanding of engineering or architectural principles, construction methods, and materials to accurately translate design concepts into technical drawings. Attention to Detail: Exceptional attention to detail to ensure accuracy and precision in drafting tasks, including proper dimensioning, scaling, and annotation. Communication Skills: Effective communication skills to collaborate with multidisciplinary teams, convey technical information clearly, and address design issues. Problem-Solving Abilities: Strong problem-solving skills to identify and resolve design conflicts or technical challenges during the drafting process. Anticipate and troubleshoot areas of concern and resolve issues. Time Management: Ability to manage multiple projects simultaneously, prioritize tasks, and meet deadlines in a fast-paced environment. Knowledge of Manufacturing Processes: Understanding of manufacturing processes and techniques, including machining, welding, and fabrication, for drafting mechanical or industrial designs. This is not an exhaustive list and other duties related to account management may be required. ITP is ADA compliant and welcomes requests for accommodations to the listed essential duties. REQUIRED: High School Diploma • 3+ years related work experience • Ability to analyze and interpret designs/drawings • Expertise in using CAD software (AutoCAD & SolidWorks) • Excellent organizational skills with the ability to work on multiple projects in a fast-paced environment • Excellent communications skills both verbal and written DESIRABLE: Bilingual - Spanish (plus) • Experience of using Epicor P21 ERP system • Experience in the fastener industry Company Overview: Industrial Threaded Products, Inc. (ITP) is a leading distributor and manufacturer of commercial threaded products and fasteners. The company has grown from a small industrial distributor in 1979 to a global supply chain service provider today, serving organizations nationwide. The company's growth has in part been attributable to its ongoing focus on better serving its customers through expanded and improved capabilities and product offerings, most recently by adding an automatic packaging line and custom threading operation. ITP serves several different industries and market segments, with a core focus on Construction, Waterworks, OEM, Pipe Supports, and Structural Steel. The company is family owned but is managed by a senior executive team focused on strategy and ongoing planning. Management places high value on training and empowering its team members and rewarding performance. The company's headquarters are located in Brea, CA which hosts centralized accounting, sales and purchasing functions as well as warehouse, packaging, and kitting operations. Fabrication, manufacturing, and warehousing operations are located within the Rancho Cucamonga, CA facility. The Fresno, CA warehouse services Northern California and a number of national accounts. The acquisitions of Construction Tool & Threading Co., Ababa Bolt, and Bristol Machine Co. have been pivotal in expanding our capabilities, broadening our product and service offerings, and reinforcing our commitment to meeting the diverse needs of our customers nationwide. ITP's Core Values: Our core values are intrinsic in all we do, and all employees must learn and work to them in all they do: Serving ( we thoroughly enjoy providing a level of quality & service that goes far beyond what is expected ) Hardworking ( we are passionate and will outwork any competitor with efficiency and relentless focus ) Innovative ( we choose to be a solutions-driven company committed to strategic innovation ) Relational ( people matter deeply to us and we treat them with the highest level of respect and loyalty ) Trusted ( we are honored by the level of trust given to us by our customers and we embrace our reputation ) Candor ( approaching all dealings and communications in a respectful, open, and honest way ) Job Type: Full-time Salary: $22-$25 per hour DOE Benefits: 401(k) Dental Insurance Disability insurance Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance Experience level: 3 years related CAD drafting experience Schedule: Monday to Friday 7:00 AM - 4:00 PM

About Us PAR Western Line Contractors, LLC (dba QUES), a subsidiary of Quanta Services, Inc. (NYSE: PWR), is composed of some of the most highly qualified professionals experienced in all aspects of engineering, designing, asset management, and construction management for the electric utility and other industries. We are a highly mobile and flexible team with the ability to service every area and region within our customers' area of operation. With over 700 employees and growing, we have thousands of years of combined electrical utility experience to draw from when committing to provide our clients with a wide range of utility services. About this Role QUES (PAR Western Line Contractors LLC dba) safely provides engineering, procurement and construction services for comprehensive infrastructure needs in the electric power, oil, and natural gas industries. QUES has the knowledge and expertise to handle a full spectrum of projects. From the most straightforward, single-component installation to the most complex, multi-state project, QUES handles the job safely, efficiently, and cost-effectively. We are seeking a detail-oriented and experienced Drafter with a strong background in base mapping and Southern California Edison (SCE) drafting standards. The ideal candidate will be proficient in GeoView, possess a solid understanding of utility mapping, and be capable of producing high-quality drafting deliverables that support engineering and infrastructure projects. QUES offers a professional work environment, excellent benefits, competitive pay, and potential growth. What You'll Do Utilize survey data to develop precise base maps for utility and infrastructure planning. Draft city infrastructure elements including streetlights, sewer lines, storm drains, curbs, gutters, and other public assets. Apply SCE-specific drafting standards across various base mapping projects. Committed to maintaining up-to-date knowledge of evolving SCE drafting guidelines and procedures. Create Single Lines, vicinity maps, index sheet, and viewports Tie down structures (station and dimension all Edison Structures to proper standards) Utilizes AutoCAD /AUD to create Base maps from Survey and GeoView. Implementing city utilities such as water, storm drain, sewer, and any other utilities that are in the project area using city as-builts provided by our Look-Up Department Following up on city utilities request form our Look-Up department Re-drawing Edison Underground ducts and cables in AUD using GeoViews offsets and dimensions. Maintain and organize digital files and documentation in accordance with company and client protocols. Perform quality checks to ensure compliance with drafting standards and project requirements. Collaborate with engineers, project managers, and field teams to ensure accurate and timely drafting deliverables. Work a regular 40‐hour workweek, with overtime as required. Work on multiple projects simultaneously and submit deliverables on time. What You'll Bring Basic knowledge and ability to utilize AutoCAD and AUD software. Ability to accurately interpret underground utility layouts, including SCE cable and duct runs. Experience reading overhead electrical system callouts and integrating them into drafting deliverables. Ability to code routines within AutoCAD Knowledge of general civil drafting practices Ability to read and understand City As-Builts and civil maps Ability to utilize online maps to gather information. Proficiency in GeoView, AutoCAD, and GIS platforms. Able to learn quickly and change focus when needed. Ability to multi‐task, with good organizational, planning and communications skills. Proficient computer skills required. A minimum of 5+ years of professional experience in design and estimation, or an engineering degree or a Cal Poly Planner Certification, is highly preferred. Ability to interpret technical drawings. Has a broad knowledge of engineering principles, construction standards, and industry practices. Must have a positive attitude and an exemplary work ethic. Excellent communication, interpersonal, and leadership skills, with the ability to collaborate effectively with internal teams. Ability to work independently, manage multiple tasks, and determine priorities in a complex environment. Applicants who do not meet all qualifications may still be considered for alternate designer positions based on skill level and potential. What You'll Get Health Insurance: Medical, Dental, Vision Plans, Critical Illness, Hospital Indemnity, Accident Flexible Spending Accounts/Health Savings Accounts PWR Discounts (Flight Tickets, Amusement Park Tickets, Nike) Group Discount (Pet Insurance, Auto Insurance, Home Insurance) Retirement Savings Plan (401K) with company matching Short & Long Term Disability Supplemental Life and AD&D Insurance Paid Holidays and Vacation Compensation Range The anticipated compensation for this position is USD $24.00/Hr. - depending on experience and qualifications. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Broadley-James Corporation designs and manufactures high-quality pH and dissolved oxygen (DO) measurement solutions for both life science and industrial process applications. We are seeking a detail-oriented SolidWorks Drafter to create accurate 3D models and 2D manufacturing drawings of our manufactured pH sensors and related components. The work schedule is Monday-Friday, 7:30am-4:00pm. The ideal candidate is highly proficient in SolidWorks, comfortable working from physical samples and legacy documentation, and capable of producing clear, controlled drawings suitable for manufacturing, inspection, customer requirements and documentation purposes. Tasks and Responsibilities: Create and maintain 3D part and assembly models in SolidWorks, primarily based on existing components and assemblies Generate 2D drawings including dimensions, tolerances, notes, and views required for manufacturing and quality inspection Convert legacy drawings, sketches, or undocumented parts into standardized SolidWorks models and drawings, in accordance with company expectations Apply company drawing standards, naming conventions, and revision control requirements Update drawings to reflect approved changes and maintain drawing accuracy over time Organize and manage CAD files within the company's document control system Collaborate with engineering, manufacturing, quality, and purchasing teams to clarify drawing requirements Measure and document physical parts using calipers, micrometers, and other basic metrology tools, where necessary Support audits, supplier communication, and internal documentation needs as required Abilities: Ability to accurately translate physical parts into 3D models and 2D drawings Ability to work methodically with high attention to detail and dimensional accuracy Ability to follow established drafting standards, templates, and revision controls without deviation Ability to manage multiple drawings and priorities while meeting deadlines Ability to identify missing, conflicting, or unclear information and escalate appropriately Ability to collaborate effectively with engineering, manufacturing, quality, and purchasing teams Ability to maintain organized CAD data within a PDM-controlled environment Ability to accept direction and feedback while working independently once requirements are defined Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to sit for extended periods while working at a computer workstation Ability to perform repetitive hand and wrist movements while using a keyboard and mouse Ability to view and interpret detailed drawings and CAD models on a computer screen Ability to occasionally stand, walk, bend, and reach while accessing files or equipment Ability to handle, measure, and manipulate small mechanical components and assemblies Ability to use basic measurement tools such as calipers and micrometers Ability to lift and carry items weighing up to 20 pounds on an occasional basis Ability to work in an office and/or light manufacturing environment with standard safety requirements Preferred Experience/ Minimum Qualifications: Proven work experience as a CAD Drafter using SolidWorks Hands-on experience working within a SolidWorks PDM system, including check-in/check-out procedures, revision control, file structure and metadata management Demonstrated ability to create production-ready 2D drawings and 3D models Experience modeling from existing physical components and legacy documentation Working knowledge of basic GD&T, tolerancing, and manufacturing drawing practices Strong organizational skills and attention to detail Ability to follow documented processes and maintain data integrity Familiarity with ERP systems and formal document control workflows Associate degree or technical certification in drafting, CAD, or related field preferred Experience with mechanical or electro-mechanical components preferred Experience in regulated manufacturing environments (ISO 9001, GMP, etc.) preferred Broadley-James Corporation offers many benefits including: Competitive salaries Medical, dental, vision, life insurance etc. 401(k) plan Education assistance Corporate sponsored discounted gym membership 9+ paid holidays per year Vacation and sick pay

ALIGCUS Construction is hiring a Mandarin-speaking Architectural drafter/designer. This position needs to work for both our US company at office and China design team remotely. Our company primarily works on AutoCAD to complete construction schematics to prepare for city or county approval. Knowledge of municipal building codes is necessary as well. Job Description: 1. responsible for coordinating with architects and municipal government departments related to personal communication, building program drawing, construction drawing, construction, and communication work; 2. responsible for communicating and cooperating with China design team and US design team, translating for both teams to make work done more efficiently; 3. Work time from Mon-Thurs 10AM-7PM, Fri 9AM-6PM, 1 hour meal time Qualifications: 1. fluent both in English and Mandarin; 2. proficiency in various types of design software, AutoCAD, Rhino, Revit, 3D Max, sketch-up, PS, etc. (the company can provide relevant training and supplies); 3. 2-3 year architectural design experience Job Type: Full-time Starting pay: $18.00 per hour Can sponsor H1B if needed COVID-19 considerations: All desks have been moved to comply with state social distancing guidelines. Face masks and anti-bacterial sanitizers are available for all office personnel. Job Type: Full-time Pay: $18.00 - $24.00 per hour COVID-19 considerations: All desks have been moved to comply with state social distancing guidelines. Face masks and anti-bacterial sanitizers are available for all office personnel. Edit job OpenView public job page