Computer aided design designer jobs in Tulsa, OK - 96 jobs

Our client is one of the world leaders in innovative design of High Performance Air Cooled Heat Exchangers (ACHE) servicing the Power Generation, Data Center, Renewable Energy, and Oil and Gas Markets on a global scale. As a Designer, you will be responsible for creating 3D CAD models and piece part drawings using Inventor. Key Responsibilities: Be able to create complete solid models with pre-assigned part numbers; The designer will try to utilize existing parts but if they do not exist, a new part number will need to be created. Pride with modeling accuracy and drawing detailing is critical. This includes proper mating, constraints, and modeling consistency. Communicate realistic due dates for project completion. Complete 3D model with all parts pre-assigned and fully detailed in case the project needs to be reassigned. Prepare approval drawings in a standardized format for the customer's review. Prepare piece part drawings of the entire assembly after project approval. Prepare accurate Bill of Materials (BOM) for the project both on the drawings and in EPR system. Complete release sheets so projects can be released to the shop. Correct errors when requested. Other duties as assigned. Education and Experience: Associate's degree in Drafting or equivalent combination of experience and education. 5+ years drafting/design experience. Previous experience with Inventor preferred. Previous experience with Heat Exchangers preferred. Strong understanding of mechanical principles, manufacturing processes, and materials science. Ability to manage multiple projects and work effectively in a fast-paced environment. Excellent communication and teamwork skills. Work Environment: This job is based in a manufacturing environment with a combination of office and plant floor responsibilities. This role uses standard office equipment. When in the manufacturing facility, all employees are required to wear personal protective equipment to include/hearing protection, and safety glasses with side shields, and OSHA compliant safety boots/shoes. Physical Demands: While performing duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Benefits: Generous benefits package including comprehensive health, dental, vision, 401(k) retirement plan with company match, a generous paid time off schedule, and professional development opportunities. Position Type/ Expected Hours of Work: This is a full-time exempt position. Days and hours of work are Monday through Friday, 7:00 a.m. to 4:00 p.m. Occasional evening and weekend work may be required.

Senior Mechanical Engineer Metric Geo are partnered with a fast growing contractor who are looking for a Senior Mechanical Engineer with expertise in facility mechanical systems for industrial and manufacturing projects. This role leads design efforts, mentors junior engineers, and ensures projects are delivered on time, on budget, and to code. What You'll Do: Lead design of HVAC, plumbing, utilities, steam, compressed air, chilled water, and process piping systems Produce 2D AutoCAD drawings and 3D Revit models Mentor and guide mechanical engineers on the team Conduct site evaluations and gather field data Collaborate with clients, vendors, and internal teams Ensure compliance with ASME, ASHRAE, OSHA, and other relevant standards What You Bring: PE in Mechanical Engineering, B.S. required 10-20 years of mechanical system design experience in industrial or manufacturing facilities Strong knowledge of codes, standards, and facility mechanical systems Excellent leadership, communication, and project management skills Benefits: Competitive salary, sign-on bonus, health/vision/dental, 401(k) with match, PTO, and relocation assistance If you're a seasoned mechanical engineer ready to lead design projects and mentor a team, we want to hear from you.

Job DescriptionSalary: Tulsa's Premier Builder, Simmon's Homes, is seeking an experienced Residential CAD Designer to join our team. This is a great opportunity for an individual with knowledge and experience in residential drafting standards, local and regional building codes, and AutoCAD. Responsibilities Include: * Draw plot plan, floor plan, elevations, electrical plans, Stresscon drawings and submit DEQ applications for each customer * Draw up customer changes during or after design appointment * Apply for permits and send out check requests once permit is complete * Create braced wall documents for each house * Create sales flyers, furniture, floor area layouts for each new plan * Answer questions from sales and superintendents as needed * Place house plans on lots per sales requests * Create options for each plan and options based on customer requests * Create new plans * Miscellaneous other projects as assigned Qualifications: Must be able to read and create full sets of residential construction drawings with details, have knowledge of local and regional building codes, understand residential construction techniques, have 5 years of proven work experience; must be detail orientated with strong communication and organizational skills with ability to work in a growing, collaborative, fast-paced environment. We offer a great benefits package including medical, dental, vision, life, 401(k), and other supplemental benefits.

We are currently looking to fill a Draftsman position with a manufacturing company in the Tulsa, OK area. Are you detail-driven, experienced in technical drawing, and familiar with manufacturing standards such as ASME and TEMA? Our client, a respected manufacturer of shell and tube heat exchangers, is seeking a Draftsman to join their engineering team. This position plays a critical role in ensuring production drawings are accurate, compliant, and ready for fabrication. Pay: $25-$35/hr DOE Schedule: Monday-Friday, 7:30a-4:30p Key Responsibilities: Create detailed fabrication drawings for shell and tube heat exchangers Complete Code Data Reports for each exchanger project Perform basic design work on non-code parts not assigned to the Product Designer Finalize tube layouts including tie rods, seal bars, and dummy tube locations Validate all drawings for compliance with ASME code, TEMA standards, and other applicable regulations Ensure drawings align with user-defined specifications and manufacturing capabilities Occasionally assist on the shop floor with measurements or inspections Benefits: Medical, dental, and vision insurance Life and AD&D coverage Short-term and long-term disability Flexible spending account (FSA) Accident and critical illness insurance Legal plans and more

Our client is one of the world leaders in innovative design of High Performance Air Cooled Heat Exchangers (ACHE) servicing the Power Generation, Data Center, Renewable Energy, and Oil and Gas Markets on a global scale. As a Designer, you will be responsible for creating 3D CAD models and piece part drawings using Inventor. Key Responsibilities: Be able to create complete solid models with pre-assigned part numbers; The designer will try to utilize existing parts but if they do not exist, a new part number will need to be created. Pride with modeling accuracy and drawing detailing is critical. This includes proper mating, constraints, and modeling consistency. Communicate realistic due dates for project completion. Complete 3D model with all parts pre-assigned and fully detailed in case the project needs to be reassigned. Prepare approval drawings in a standardized format for the customer's review. Prepare piece part drawings of the entire assembly after project approval. Prepare accurate Bill of Materials (BOM) for the project both on the drawings and in EPR system. Complete release sheets so projects can be released to the shop. Correct errors when requested. Other duties as assigned. Education and Experience: Associate's degree in Drafting or equivalent combination of experience and education. 5+ years drafting/design experience. Previous experience with Inventor preferred. Previous experience with Heat Exchangers preferred. Strong understanding of mechanical principles, manufacturing processes, and materials science. Ability to manage multiple projects and work effectively in a fast-paced environment. Excellent communication and teamwork skills. Work Environment: This job is based in a manufacturing environment with a combination of office and plant floor responsibilities. This role uses standard office equipment. When in the manufacturing facility, all employees are required to wear personal protective equipment to include/hearing protection, and safety glasses with side shields, and OSHA compliant safety boots/shoes. Physical Demands: While performing duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Benefits: Generous benefits package including comprehensive health, dental, vision, 401(k) retirement plan with company match, a generous paid time off schedule, and professional development opportunities. Position Type/ Expected Hours of Work: This is a full-time exempt position. Days and hours of work are Monday through Friday, 7:00 a.m. to 4:00 p.m. Occasional evening and weekend work may be required. #INDOMNI

Job DescriptionJob Title: Design Engineer - Structural A structural steel fabrication company is seeking a Design Engineer - Structural to support the engineering and design of steel structures used in electrical transmission and traffic applications. This role is responsible for completing structural engineering calculations, reviewing drawings, and ensuring all deliverables meet industry standards, project requirements, and internal quality expectations. Primary Responsibilities Participate in the development and maintenance of engineering standards. Design structural components for steel structures used in electrical power line and traffic intersection applications. Perform engineering calculations and structural analysis. Provide accurate inputs to design teams for fabrication drawings. Review structural drawings to ensure compliance with engineering and project requirements. Interpret contract documents, drawings, work orders, and customer specifications. Deliver engineering details that meet organizational and customer standards. Provide technical guidance for design reviews, investigation reports, and development of corporate standards and guidelines. Ensure engineering deliverables are completed according to project schedules. Participate in internal and external design reviews and offer technical support as needed. Qualifications Bachelor's Degree in Engineering, preferably Civil or Structural. 5+ years of experience in structural engineering and design. Professional Engineer (PE) certification. Familiarity with SolidWorks or similar 3D modeling software. Strong communication skills. Solid proficiency with computer systems and office software; regular use of computers and office equipment required. Strong organizational and planning skills. Schedule Monday: Friday 8am-5pm OT as needed Pay: $28-30/hr DOE Abundant Solutions5151 S Mingo RdSuite DTulsa OK 74146 Send resumes to ***********************

Designer/Drafter is primarily responsible for creating production drawings for natural gas line heaters, industrial direct contact water heaters, glycol dehydration units, and other products. This will include both fabrication and assembly detail drawings. Direction will be given from the Project Engineer to design a drawing package to meet the customers requirements for each job. In some cases, drawing will originate from standards and in others they will be based on previous designs. Responsibility to take engineering handoff package and with minimal instructions create a production handoff package for each project. Create general arrangement, fabrication and assembly for assign projects using both 3D, 2D CAD Create and maintain parts, their part numbers, descriptions and specifications. Manage Engineering change task wit the PLM and ERP systems Generate drawing packages for production and service of projects. Interface with engineering, production, and purchasing personnel for Engineering changes. Generate CNC files for the burn table using CAM software. Problem Solving, Adaptability, Accountability, Coachability Fulltime position Monday-Friday 8:00am-5:00pm Overtime as required. Have H.S. diploma or GED Technical Certificate or a AA Degree in drafting. 3-5 Years Exp. in drafting manufacturing, familiar with metal fab and welding procedures. APPLY IN PERSON WITH RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD BETWEEN 9AM-3:00PM AT: LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE. SUITE 105 TULSA, OK 74135

Join a team of industry professionals who value your skills and talents. At OGI Process Equipment, our goal is to hire talented and motivated people. We offer a friendly work environment with competitive wages and benefits. From engineers to welders, salespeople to sandblasters, OGI has some of the best talent in the industry. Check out our job openings, and we look forward to working with you. Summary/Objective The Designer/Drafter is primarily responsible for creating production drawings for natural gas line heaters, industrial direct contact water heaters, glycol dehydration units, and other products. This will include both fabrication and assembly detail drawings. Direction will be given from the Project Engineer to design a drawing package to meet the customers' requirements for each job. In some cases, drawings will originate from standards and in others they will be based on previous designs. It will be the designer/drafter's responsibility to take the engineering handoff package and with minimal instructions create a production handoff package for each project. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Create General Arrangement, Fabrication, and Assembly for assign Projects using both 3D and 2D CAD. Create and maintain parts, their part numbers, descriptions, and specifications. Manage Engineering Change tasks within the PLM & ERP systems. Generate drawing packages for production and service of projects. Interface with engineering, production, and purchasing personnel for Engineering Changes. Generate CNC files for the burn table using CAM software. OGI has determined this position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019. Competencies Commitment to safety Technical capacity High quality of work and thoroughness Communicate professionally with other employees. Problem solving skills. Adaptability, Accountability, Coachability Interpersonal skills and ability to work in an office environment. Supervisor Responsibility This position has no supervisory responsibilities. Work Environment This job primarily operates in a professional office environment. This role uses standard office equipment. Occasional trips to the manufacturing floor and warehouse for observation and research are also required. When in the manufacturing facility, all employees are required to wear personal protective equipment to include/hearing protection, and safety glasses with side shields. Protective toe boots are not required when an employee is in designated walkways in the plant. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing duties of this job, the person in this position frequently communicates with employees and must be able to exchange accurate information in these situations. The employee must constantly remain stationary for long periods of time, while operating a computer and other office machinery. This position needs to occasionally move about inside the office to access supply cabinets and operate office productivity machinery, such as a copy machine. The employee might occasionally lift or move objects up to 25 pounds. On occasion, may be required to visit the shop that is a non-temperature-controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Occasional hours over 40 may be required as job duties demand. Travel No travel is required for this position. Education and Experience High school diploma or equivalent (GED) Technical Certificate or an AA degree in drafting preferred. 3 to 5 years of experience in drafting for manufacturing. 1 to 2 years working knowledge of SOLIDWORKS preferred. Familiar with metal fabrication and welding procedures. Possession of strong personal organizational skills Excellent written and verbal communication skills Ability to work both independently and with a team on assigned tasks. Additional Eligibility Qualifications None required for this position. Work Authorization/Security Clearance None required for this position. AAP/EEO Statement OGI is an equal employment opportunity employer. OGI recognizes and embraces federal legislation on equal employment opportunity and is committed to providing a workplace free of discrimination. All applicants for employment and all employees will be afforded equal opportunity and treatment, regardless of age, race, religion, gender, national origin, disability status or other protected status. All employees are responsible for complying with all applicable Federal, State and Local Laws, rules, and regulations regarding non-discrimination practices. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! OGI is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Bearwood Concepts, Inc. is seeking an Engineer/Drafter in the greater Tulsa area. This is not remote. The hours are 4/10's: Monday through Thursday, from 6:00 a.m. to 5:00 p.m., with overtime as needed. Hourly rate: $20 -$30 per hour, depending on experience. Summary: Responsible for taking architectural drawings from the client and creating a conceptual design and shop drawings. Work with the client to suggest design improvements and opportunities for value engineering. Bearwood is an architectural millwork company specializing in the design and manufacturing of store fixtures for big box retail, specialty retail shops, restaurants, fitness centers, education, & medical facilities. We also manufacture and install millwork for commercial projects. Bearwood is privately held by hands-on owners that have over 150 years of millwork industry experience. Bearwood provides exceptional healthcare coverage after 60 days of employment. Other benefits and insurances offered: 401k with company match, paid holidays, paid time off, dental, vision, flexible spending, basic & voluntary life, identity theft protection, short term disability, critical illness, accident, hospital indemnity, and cancer insurance. Essential Duties and Responsibilities: Concisely produce all necessary detailed shop drawings, and other lists for production department to accurately and completely produce each job. Completely and accurately produce all necessary shop drawings for the client, the company's proposal, ERP, contract, and design software. Work with client to obtain project requirements and value engineer materials and construction options. Help create and maintain design, engineering, and drawing standards as best practices to improve quality, cost and cycle times. Field verify measurements and make field templates when necessary. Work with engineering and production to create products that are cost efficient and easy to manufacture. Develop schematic, 3D models, and design development solutions using CAD software, for prototype. Prepare sheet and graphic documentation for construction. Select and document interior building products and finishes. Perform construction administration procedures, including project documentation. Create fixture design specifications. Perform routing checks and verification for quality control. Collaborate with employees working in processing, submittals, CAD drawings, purchase order processing, engineering, job / project processing, and bids and proposals. Submit all information to client and shop in a timely so each job can be delivered and completed on time according to the production and delivery schedule. Understand properties of wood including grain, hardness, cost, color, finishes, etc. in order to make optimal recommendations to clients. Get all necessary drawings, stain samples, door samples, etc. signed by client and submitted to shop in a timely manner. Attend design meetings. Determine accurate material and labor costs form architectural and fixture drawings. Train and mentor lower level designers, drafters, and CNC programmers. Other tasks as directed by manager. Qualifications: AA in CAD Design or advanced skills in AutoCAD Proficiency in Microsoft Office Suite. Ability to be detail oriented, and work under tight deadlines with a sense of urgency. Able to work in a dynamic, fast paced environment, as the market develops in unpredictable ways, consistently producing high quality work and projecting a positive attitude. Recognize the importance of customer satisfaction through clarification of customer needs and requirements. Excellent written, verbal communication, and problem-solving skills. Must be able to priority and handle multiple tasks demonstrating excellent time management. Must have a valid driver's license with a clean driving record. Education/Experience: Minimum of a one-year certificate from a college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Office Suite; AutoCad and Database software. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision. While performing the duties of this job, the employee is frequently required to sit. The employee is occasionally required to walk and talk or hear. Bearwood Concepts, Inc. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity.

We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description As an I&C Drafter at Olsson, you will support the development of high-quality engineering solutions for data center projects. You'll assist in preparing instrumentation and controls design documents, collaborate with engineers and other disciplines, and help ensure designs meet project requirements and safety standards. This is an excellent opportunity for early-career professionals to grow in a collaborative and technically driven environment. Primary Responsibilities: Assist in preparing instrumentation engineering/design deliverables including: Instrument Index Instrument Data Sheets Installation Details Instrument Location Plans Wiring Diagrams and Loop Diagrams Support the development of control systems (DCS/PLC) documentation: I/O Lists Process Control Narratives Graphic Sketches Cause & Effect Diagrams Alarm Rationalization Collaborate with third-party control system vendors and participate in Factory Acceptance Tests (FAT). Help develop and review P&IDs for various projects. Assist in selecting and sizing I&C components such as valves, thermowells, orifice plates, and relief valves. Work across disciplines to develop level sketches and ensure design integration. Review vendor documentation and contribute technical input. Ensure compliance with company and project site safety policies. Perform other duties as assigned. You are passionate about: Learning and applying innovative control system design practices. Collaborating with engineers and designers to create integrated solutions. Exploring new instrumentation technologies and industry standards. Growing professionally in a supportive and mentorship-driven environment. Contributing to safe and efficient engineering outcomes. You Bring to the Team: Experience in Electrical Engineering, Mechanical Engineering, or a related field. Associate's degree preferred. 0-4 years of experience in instrumentation and controls drafting or design. Familiarity with engineering design software and tools (REVIT experience is a plus). Basic understanding of control systems (DCS/PLC) and instrumentation technologies. Strong communication and teamwork skills. A willingness to learn, take initiative, and contribute to project success. #LI-DD1 Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: Receive a competitive 401(k) match Be empowered to build your career with tailored development paths Have the possibility for flexible work arrangements Engage in work that has a positive impact on communities Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

SGA Design Group is seeking a proactive team player to join us in our Tulsa office. This is an opportunity to join a dynamic team that provides architectural services for major brands across the country. You'll be working with other design professionals on ground-up buildings, remodels, and special projects. Job Functions / Responsibilities Construction Document Production - Works with team members and the client to develop detailed construction documents that align with design intent and implement the assigned scope of work. Program Management - Develops effective relationships with the client, consultants and SGA team members in order to provide exceptional service and build a strong program. Project Management & Scheduling - Effectively manages own client projects and coordinates project scheduling for the team. Quality Control - Review documents for accuracy and completeness. CANDIDATE QUALIFICATIONS Education : Bachelor of Architecture, Interior Design or formal program of CAD/Revit training. Equivalent experience will be considered in lieu of a degree. Experience : 5+ years, with volume building experience highly preferred. Previous experience in a team focused environment is valued. Technical Skills : Experience designing and developing construction documents in AutoCAD and Revit required. To learn more about SGA, please visit our website at **************************** Please also learn more about our partner companies at ******************************* and ***************************************** SGA provides a competitive salary and benefits package and is an equal opportunity employer.

Designer / Drafter Pay: $21.00-$25.00/hour Shift: 1st Shift | 8:00 AM - 5:00 PM Safety Sensitive We are seeking an experienced Designer / Drafter to support the creation of production drawing packages for industrial and energy-related equipment. This Designer / Drafter role focuses on developing fabrication and assembly drawings for products such as natural gas line heaters, industrial water heaters, and glycol dehydration units, working closely with Project Engineering to meet customer and production requirements. What the Designer / Drafter Will Be Doing • Create General Arrangement, Fabrication, and Assembly drawings using 2D and 3D CAD • Develop production drawing packages from engineering handoff documents with minimal supervision • Maintain parts, part numbers, descriptions, and specifications • Manage Engineering Change tasks within PLM and ERP systems • Generate drawing packages for production and service • Interface with engineering, production, and purchasing teams for design changes • Generate CNC burn table files using CAM software • Support fabrication and assembly through accurate, production-ready documentation Required Qualifications for the Designer / Drafter • 3-5 years of drafting experience in a manufacturing environment • 1-2 years working knowledge of SOLIDWORKS preferred • Familiarity with metal fabrication and welding procedures • Strong organizational, documentation, and problem-solving skills • Ability to communicate professionally and work independently or as part of a team • High attention to detail and commitment to quality Work Environment & Physical Requirements • Primary work performed in a professional office environment • Occasional visits to the manufacturing floor and warehouse • Ability to remain seated for extended periods while working at a computer • Occasional lifting of objects up to 25 lbs • PPE required when in production areas (hearing protection and safety glasses) Education & Experience • High School Diploma or GED required • Technical Certificate or Associate Degree in Drafting preferred • Strong written and verbal communication skills This is an excellent opportunity for a skilled Designer / Drafter seeking steady first-shift hours and long-term growth in a manufacturing and engineering environment. Job Order # 123419 Stand-By Personnel | Skilled Division

Job DescriptionPosition location available in Tulsa, OK or Casper, WY. Seeking a highly motivated and skilled Drafter to join our team. The ideal candidate will have a strong understanding of drafting techniques and experience working with CAD software to produce detailed technical drawings and blueprints. Familiarity with Inventor Drafting Program is a plus. The Drafter will work closely with engineers, designers, and other team members to bring concepts to life in precise and clear drawings, ensuring all designs meet technical specifications and quality standards of our customers. Key Responsibilities: Create and modify detailed technical drawings, plans, and blueprints using CAD software. (Inventor) Interpret engineering sketches, designs, and specifications to produce accurate drafts.Work closely with Project Managers, customers, and design teams to ensure designs are functional and meet all technical and manufacturing requirements.Ensure compliance with relevant industry standards, codes, and regulations.Revise and update drafts as per feedback and changes in design or specifications.Prepare presentation drawings for review and project coordination.Maintain accurate documentation and records of drawings and revisions.Troubleshoot drawing and design issues, providing solutions to improve functionality and design.Ensure that all drawings are completed on time and within project specifications.Collaborate in product development phases to ensure accurate representation of ideas. Qualifications:Associate's degree in Drafting, Engineering Technology, or related field (or equivalent work experience).Proficiency in CAD software such as Inventor, AutoCAD, SolidWorks, or similar programs.Experience with Inventor Drafting Program is a plus.Strong attention to detail and ability to produce accurate drawings.Good communication skills and the ability to work in a collaborative environment.Knowledge of materials, manufacturing processes, and product design principles.Ability to prioritize tasks and manage time effectively in a fast-paced environment.Basic understanding of engineering principles and concepts. Preferred Skills and Experience:Experience with 3D modeling and drafting.Knowledge of mechanical, electrical, or civil engineering drawing standards (depending on the industry).Familiarity with industry-specific regulations and codes.Ability to work with multiple team members across different stages of a project.

Merrick & Company is looking for an Electrical Designer II in our Tulsa, OK; Greenwood Village, CO; or Richmond, VA offices. The position of Electrical Designer will be responsible for designing power systems primarily for Heavy industrial facilities, Oil, Gas & Chemical projects. This position's responsibilities include complete electrical designs performed at the drawing level. Assists Project Engineer with drafting responsibilities and some design. After an initial training period, this position has the possibility of being hybrid - part time in the office and part time from home. The pay range for this position is $32.84 - $42.45 per hour. Pay offered may vary depending on job related knowledge, skills, and experience. WHAT YOU'LL DO * Apply knowledge of building systems * Utilize working knowledge of codes and standards including but not limited to: NFPA 70, 72, 101, 110, 780; UL 96A; ASHRAE 90.1; and Building Codes * Assist the Lead Electrical Engineer or Senior Engineer with working with building/facility owner to ensure that the appropriate systems/products are utilized. * Design power distribution, panelboard schedules, grounding/protection designs. * Coordinate the connections of all power utilization. * Document calculations, reflecting code compliance of lighting calculations, power load calculations, and voltage drop calculations. * Fire alarm design, telecommunications design (knowledge of EIA/TIA standards), CCTV system design and intrusion detection system design.: * Provide Quality Control reviews for self-performed designs and designs by others. * Conduct field inspections and complete reports. * Work with Design/Engineering Managers to ensure that project schedule will be met, and complete documents are provided for each submission. REQUIRED QUALIFICATIONS * High School Diploma or equivalent required. * Minimum of four (4) years of experience electrical designing and drafting. * Must have a valid driver's license, a good driving record, and be insurable under Merrick's insurance carrier. * Canidadates must be eligible to work in the United States without sponsorship. PERKS * Employee Owned - all eligible U.S. employees have an Employee Stock Ownership Account. * Robust Employee Referral Program. * Annual performance reviews and merit increases. * Professional Training and Development. * Employee Recognition Awards. * Peer Mentor Program * And Much More! ADDITIONAL INFORMATION * Apply online only. No e-mail, hard copy or third-party resumes accepted. * At Merrick, every resume is carefully reviewed by our team of experienced human recruiters-never by AI. We are committed to a fully human-centered hiring process, ensuring each candidate receives thoughtful, personalized attention at every stage. * Merrick & Company offers a competitive compensation and benefits package which includes health insurance, dental and vision coverage, 401(k), and paid time off (PTO). * Merrick is an Equal Opportunity Employer, including disability/vets. * Employment with Merrick is contingent upon completion of a pre-employment background check, MVR check, and drug screen. * High School Diploma or equivalent required. * Minimum of four (4) years of experience electrical designing and drafting. * Must have a valid driver's license, a good driving record, and be insurable under Merrick's insurance carrier. * Canidadates must be eligible to work in the United States without sponsorship. * Apply knowledge of building systems * Utilize working knowledge of codes and standards including but not limited to: NFPA 70, 72, 101, 110, 780; UL 96A; ASHRAE 90.1; and Building Codes * Assist the Lead Electrical Engineer or Senior Engineer with working with building/facility owner to ensure that the appropriate systems/products are utilized. * Design power distribution, panelboard schedules, grounding/protection designs. * Coordinate the connections of all power utilization. * Document calculations, reflecting code compliance of lighting calculations, power load calculations, and voltage drop calculations. * Fire alarm design, telecommunications design (knowledge of EIA/TIA standards), CCTV system design and intrusion detection system design.: * Provide Quality Control reviews for self-performed designs and designs by others. * Conduct field inspections and complete reports. * Work with Design/Engineering Managers to ensure that project schedule will be met, and complete documents are provided for each submission.

The mechanical drafter is responsible for engineering custom units for production release. Essential functions To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Maintain a safe and clean working environment by complying with procedures, rules, and regulations. Create necessary sheet metal drawings required for fabrication and assembly. Create dimensional and piping drawings for customers according to customer specifications. Send finished drawing to applications engineer for review. Determine components to be mounted on the base (compressor, chiller, condenser, etc.) for mounting location and design structural/sheet metal bases accordingly. Release sheet metal, base, and assembly drawings to production upon completion. Work with sales to understand needs and create solutions. Visit production-type areas where assistance in design questions or revisions needs a solution. Attend meetings when requested to collaborate in a team environment to find solutions for problems and opportunities. Work with all departments on obtaining information. Attend work as outlined in Employee Handbook and/or specified by your supervisor. Complete other tasks as directed by supervisor. Comply with government regulations, laws, company policies, and company procedures. Desired qualifications Education: High school diploma or General Education Degree (GED). Experience: At least 2 years prior experience in design and working with the AutoCAD program through work experience or higher education courses specific to designing. Skills: Ability to use Microsoft productivity software. Self-motivated. Effective oral and written communication skills. Multi-tasking abilities. Must have basic computer skills. Ability to read a tape measure down to 1/16 of an inch. Basic math skills are required and the employee must also have the ability to recognize basic angle measures (45°, 90°, 180°, 270°, 360°) along with recognizing and converting fraction & decimal equivalents. Certificates, licenses or training: On-site training. Extensive training in CAD programs (SolidWorks/AutoCAD, etc.) Interaction with others Answers to Director of Product Design. Must be able to accurately receive and understand instructions from supervisor to determine if further instruction is required before attempting to complete the task assigned. In constant communication with other departments (Sales, production, etc.). It is essential that the employee is able to work with all employees of the RAE team and shows a spirit of cooperation with others in the organization. working environment The job is conducted primarily in a climate-controlled office setting, with occasional exposure to the manufacturing environment including moving mechanical parts and vehicles. The noise level in the work environment is usually quiet to moderate. tools & equipment used Stapler Windows 7 AutoCAD SolidWorks Tape Measure Ruler Photocopier/Scanner/Fax Machine Microsoft Office (Word, Powerpoint, Excel, Sharepoint, Outlook, etc.) Telephone Safety Glasses (when required) Computer physical demands Physical Demands Lift/Carry Stand O Walk O Sit C Handling / Fingering F Reach Outward F Reach Above Shoulder O Climb O Crawl N Squat or Kneel O Bend O Twist O 10 lbs or less O 11-20 lbs O 21-50 lbs O 51-100 lbs N Over 100 lbs N Push/Pull 12 lbs or less O 13-25 lbs O 26-40 lbs N 41-100 lbs N +100 lbs N N (Not Applicable) Activity is not applicable to this occupation. O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements: Vision - Near, Sense of Sound (Audible Voice), Ability to wear Personal Protective Equipment (PPE) (Safety Glasses) The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. RAE Corporation is an Equal Opportunity Employer EEO/AA M/F/V/D

Tulsa's Premier Builder, Simmon's Homes, is seeking an experienced Residential CAD Designer to join our team. This is a great opportunity for an individual with knowledge and experience in residential drafting standards, local and regional building codes, and AutoCAD. Responsibilities Include: * Draw plot plan, floor plan, elevations, electrical plans, Stresscon drawings and submit DEQ applications for each customer * Draw up customer changes during or after design appointment * Apply for permits and send out check requests once permit is complete * Create braced wall documents for each house * Create sales flyers, furniture, floor area layouts for each new plan * Answer questions from sales and superintendents as needed * Place house plans on lots per sales requests * Create options for each plan and options based on customer requests * Create new plans * Miscellaneous other projects as assigned Qualifications: Must be able to read and create full sets of residential construction drawings with details, have knowledge of local and regional building codes, understand residential construction techniques, have 5 years of proven work experience; must be detail orientated with strong communication and organizational skills with ability to work in a growing, collaborative, fast-paced environment. We offer a great benefits package including medical, dental, vision, life, 401(k), and other supplemental benefits.

A growing and innovative company in Claremore, OK is looking for a skilled and detail-oriented CAD Drafter to join their team. In this role, you'll transform engineering sketches and notes into precise technical drawings used in production, ensuring quality, accuracy, and compliance with specifications. This is a full-time, in-office position offering a structured weekly schedule, early Friday dismissal when work is completed, and the opportunity to work on a variety of technical projects within a supportive team environment. Pay Range: $28-$32/hour (+Depending on Experience) Schedule: Monday-Thursday, 8:00 AM-5:00 PM; Friday, 8:00 AM-3:00 PM (early out on Fridays when weekly work is completed) Key Responsibilities: The CAD Drafter is responsible for preparing detailed structural drawings-including dimensions, fastening methods, and other essential engineering details-using AutoCAD and SolidWorks. The role plays a key part in translating technical concepts into clear, accurate, and actionable production plans. Create and revise detailed CAD drawings using AutoCad and Solidworks Translate engineering sketches and specifications into complete design documents Calculate dimensions, weights, capacities, and other technical data using mathematical formulas Ensure all project folders and design documentation are current and organized Issue final production drawings, job packets, and CNC data to relevant departments Follow standard drafting policies and quality control procedures Collaborate with engineering, production, and documentation teams to meet project deadlines

Fort Worth, TX; North Kansas City, MO; Omaha, NE; Tulsa, OK ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** As an **I&C Drafter** at Olsson, you will support the development of high-quality engineering solutions for data center projects. You'll assist in preparing instrumentation and controls design documents, collaborate with engineers and other disciplines, and help ensure designs meet project requirements and safety standards. This is an excellent opportunity for early-career professionals to grow in a collaborative and technically driven environment. **Primary Responsibilities:** + Assist in preparing instrumentation engineering/design deliverables including: + Instrument Index + Instrument Data Sheets + Installation Details + Instrument Location Plans + Wiring Diagrams and Loop Diagrams + Support the development of control systems (DCS/PLC) documentation: + I/O Lists + Process Control Narratives + Graphic Sketches + Cause & Effect Diagrams + Alarm Rationalization + Collaborate with third-party control system vendors and participate in Factory Acceptance Tests (FAT). + Help develop and review P&IDs for various projects. + Assist in selecting and sizing I&C components such as valves, thermowells, orifice plates, and relief valves. + Work across disciplines to develop level sketches and ensure design integration. + Review vendor documentation and contribute technical input. + Ensure compliance with company and project site safety policies. + Perform other duties as assigned. **You are passionate about:** + Learning and applying innovative control system design practices. + Collaborating with engineers and designers to create integrated solutions. + Exploring new instrumentation technologies and industry standards. + Growing professionally in a supportive and mentorship-driven environment. + Contributing to safe and efficient engineering outcomes. **You Bring to the Team:** + Experience in Electrical Engineering, Mechanical Engineering, or a related field. + Associate's degree preferred. + 0-4 years of experience in instrumentation and controls drafting or design. + Familiarity with engineering design software and tools (REVIT experience is a plus). + Basic understanding of control systems (DCS/PLC) and instrumentation technologies. + Strong communication and teamwork skills. + A willingness to learn, take initiative, and contribute to project success. **\#LI-DD1** **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Job DescriptionESSENTIAL DUTIES AND RESPONSIBILITIES: The following duties are essential to the successful and satisfactory performance of this job. Other duties may be assigned. Uses computer assisted design/drafting equipment and software to develop designs, create production drawings (detailed multi-view and assembly drawings). Utilizes knowledge of various machines, engineering practices, mathematics, materials and other physical sciences to complete drawings. Revises and updates existing drawings reflecting design changes to ensure consistent documentation. Creates documentation for determining shipping requirements for product deliveries (load drawings). Creates and maintains programs and documentation for CNC production equipment. Processes and verifies Work Orders, accurately completing work tasks according to schedule and changing priorities. Establish filing guidelines for drawings to maintain up-to-date drawings and an accurate CAD database. Creates and maintains records, design calculations and other documentation (e.g. Bill of Materials, model weight, raw stock requirements, design parameters, and costing) for future reference.EDUCATION AND/OR EXPERIENCE: (Minimum Requirements) Associate's degree or completion of a technical trade school in CAD, drafting or related field plus 2 years practical experience utilizing relevant CAD system in a production environment. 5 years practical design/drafting experience in a similar environment will be considered equivalent. SOFTWARE KNOWLEDGE AND SKILLS: Strong computer skills, including Microsoft Office Suite (Word, PowerPoint, Outlook, and Excel) and Epicor experience preferred. Experience using AutoCAD 2D design software in a production environment is required. Experience using ProNest software and Mazak Laser Nesting software. EQUIPMENT KNOWLEDGE AND SKILLS: PC's, PC hardware, and basic office equipment, CNC cutting tables and relative software.PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands and work environment described here are representative of those that must be met and/or encountered by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk and climb or balance. Must work with keyboard, mouse, and monitor for long periods of time The employee must occasionally lift and/or move up to 50 pounds. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places and fumes or airborne particles. The noise level in the work environment is usually moderate.