Computer numerical controller machinist jobs in Arizona

The successful candidate will report to the Machining Supervisor and perform machining duties with the manufacturing environment. Shift Hours: 3:15 PM - 11:45 PM The Role Amphenol Aerospace Operations is seeking a CNC Machinist to work out of its brand new, state-of-the-art facility in Mesa. The key responsibilities of this CNC Machinist include, but are not limited to: Is knowledgeable in CNC machining and secondary equipment Assists Production Supervisors with all aspects of KPI requirements (Safety, Quality, Delivery, Inventory and Cost) Active participant and advocate of Lean & 5S culture company wide Follows "in-process" quality inspections and works with team members to ensure total quality Aids in feedback to planning & engineering to optimize productivity Provides translation service for team members when required Ensure usage of correct gaging, hand measuring tools & metrology equipment to deliver the highest possible quality components for our customers Support preventative maintenance of equipment and report machine issues to production supervisor The Location Mesa, AZ 25 minutes from Phoenix, AZ The Person The key skills and qualities of a CNC Machinist at Amphenol Aerospace Operations: Minimum 2 years of lathe production experience on CNC & related production equipment Read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operations Strict time management with self and other employees to support a productive work environment. This includes providing hourly production stats to shift supervisor & implementing quick corrective actions to help team members reach their goals Excellent attendance Ability to communicate with and collaborate with team members Intermediate computer skills Ability to work on a busy manufacturing floor The Company With manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for over 95 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol is a proud Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, sexual orientation, gender identity or expression, national origin, age, protected veteran status or disability status. We aim to create an inclusive working environment where all employees are respected and treated equally regardless of their gender, race, sexual orientation, disability, religion or age. Amphenol - Making History, Designing the Future

Job description: Company Description: Our long term client is a growing manufacturing company specializing in precision machining and fabrication. They are currently seeking an experienced CNC Machinist (Mills & Lathes) to join their team. If you are a skilled professional with a strong background in CNC machining, blueprint reading, and setup operations, we want to hear from you! Position Overview: As a CNC Machinist (Mills & Lathes), you will play a crucial role in producing high-quality machined components for a variety of industries such as the aerospace, automotive and medical device industries that require tight tolerance machining. You will be responsible for setting up, and operating CNC machines (Mills & Lathes), interpreting blueprints, adjusting tooling, making offsets, and using precision measurement tools to ensure the accuracy of the final products. Your expertise will contribute to the success of their operations. Key Responsibilities: Set up, operate, and (edit when needed) Fanuc controlled - CNC Mills & Lathes (machining OR turning) in accordance with production specifications. 2 to 4 axis machines. (5 axis mills experience definite plus!) Read and interpret blueprints and engineering drawings to ensure the accurate machining of components. Upload programs and make necessary adjustments (G&M code edits) to machine parameters. Select and install appropriate tooling and make tooling offsets as needed. Perform routine maintenance and troubleshooting on CNC machines. Conduct First Article Inspection (FAI) using tools such as: Vernier calipers, Dial calipers, Digital calipers, Micrometers, Bore micrometers, Depth micrometers, Optical Comparators, to measure and inspect parts to meet precise specifications. Monitor and maintain quality control throughout the machining process. Maintain a clean and organized workspace. Qualifications: Minimum of 5 years of CNC machining experience. Minimum 3yrs proficiency in setting up and operating CNC machines. Strong blueprint reading skills. Ability to read and understand G & M codes - Fanuc control. Knowledge of tool selection, tooling setup, and making tool offsets. Proficiency in using metrology tools (operating a CMM experience is a plus!) Strong attention to detail and commitment to producing high-quality work. Strong problem-solving skills and the ability to troubleshoot machine issues. Good communication skills and the ability to work effectively in a team. Willingness to work with a safety-first mindset. Hours/Shifts: 1st Shift Mon-Fri. 7:00am to 3:30pm Overtime available Benefits: Health Insurance - Single or Family 401k with Company Match Holiday Bonuses Performance bonuses Possible tuition reimbursement Salary Range: $25hr-$37hr (OR) $52-80K DOE

Job Details Phoenix - 401 Building - Phoenix, AZ Full Time None $25.00 - $32.00 Hourly 1st Shift Description CNC Machinist Reports To: Production Supervisor FLSA Status: Non-Exempt Direct Reports: None SUMMARY OF POSITION This position is responsible for providing technical assistance and oversight to all CNC machinists. This position also must operate the manual equipment This position is in Northstar's Manufacturing Department, and reports to the Production Supervisor. The position works with all levels of employees throughout the organization as necessary, but does not direct the work of other employees. This is a full-time position. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Assist teammates with technical issues Perform precision machining operations on aerospace hardware Provides technical oversight and assist with all setup activities on CNC equipment Helps schedule resources in areas to ensure daily work is achieved Maintain highly efficient work process using Lean principles to support cost reduction activity Responsible for operating various CNC machines and equipment SUPERVISORY RESPONSIBILITIES This position will not direct the work of any other employees. PHYSICAL REQUIREMENTS The physical requirements of this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position. Frequent standing, walking, talking, hearing and seeing Frequent lifting of up to 50 pounds Frequent reaching, climbing, balancing, stooping, kneeling, crouching, pushing, pulling, fingering, grasping, feeling, twisting, bending and repetitive motion Occasional sitting, writing and typing Visual acuity to determine the accuracy and thoroughness of product and/or parts Frequent exposure to moving mechanical parts, fumes or airborne particles Frequent exposure to moderate to heavy noise The ability to wear proper personal protective equipment, including earplugs, safety glasses, safety shoes, etc. QUALIFICATIONS AND EXPERIENCE REQUIRED Education Required: High School diploma or equivalent experience Experience Required: 5 years' experience with CNC aerospace machining KNOWLEDGE, SKILLS AND ABILITIES REQUIRED AND/OR PREFERRED The knowledge, skills and abilities required and/or preferred for this position are listed below. This list is not all inclusive and may be amended by Northstar, from time to time. Excellent verbal and written communication skills Strong work ethic Attention to detail Interface with MRP systems Good understanding of Microsoft Office products Demonstrated understanding of Lean Manufacturing concepts and 6-Sigma defect analysis Ability to work with all levels of workers in a team-oriented environment

CNC Machinist Operator Level III Pay: $28/hour + 5% shift differential Shift: Monday-Thursday, 2:30 PM-1:00 AM Type: Full-Time, Temp-to-Hire Industry: Aerospace/Manufacturing Madden Industrial Craftsmen is seeking a skilled CNC Machinist Operator Level III for a reputable aerospace manufacturing company located in [City, State]. The ideal candidate will have advanced experience in CNC machining, including setup, operation, and inspection using a variety of tools and machines (3 & 5-axis mills, live-tooling lathes, etc.). This is a hands-on role for a seasoned machinist who can work independently and mentor others. Responsibilities: * Perform complex setups and operate multiple CNC machines (mills and lathes). * Read and interpret complex blueprints and GD&T. * Machine aerospace-grade materials using a variety of platforms including 3-axis, 5-axis, live-tooling, and sub-spindle equipment. * Utilize manual and automated inspection tools including calipers, micrometers, optical comparators, and microscopes. * Monitor and document quality using in-process inspection records. * Log setup, run times, and part quantities into internal systems (Machine Metrics and job tracking software). * Perform preventative maintenance tasks via MaintainX. * Identify tooling needs and provide fixture specifications. * Collaborate with programmers to improve machining efficiency. * Mentor and assist junior machinists when needed. * Maintain a clean and organized work environment according to 5S and safety standards. Requirements: * Minimum 7 years of precision machining experience. * At least 5 years of experience setting up and running CNC equipment. * Strong working knowledge of G & M codes, tool geometry, and wear offsets. * Experience with Fanuc controls. * Experience with Doosan, HAAS, and Brother machine tools preferred. * Proficient in machine shop mathematics and GD&T. * Must have own tools required to perform the job. * Exposure to CAD/CAM is a plus. * High School Diploma or GED required. * Trade school, vocational training, or formal apprenticeship preferred. Benefits: * $28/hour + 5% shift differential * Medical benefits * 401(k) with match * Paid Sick Leave * Paid Holidays #ZR #MON

PPS is seeking an experienced CNC Router Machinist skilled in set-ups and operation to produce precision parts for our customers in the semiconductor, aerospace, defense, and other industries. This is a full-time, permanent position in a NEW, air conditioned building with a highly competitive pay rate, second-to-none benefits, and room for advancement! Responsibilities: Read and follow traveler instructions Operate 3-axis to 5-axis machine mill Load and unload material and parts Measure and document inspection data Measure, document, maintain or improve on established production standards Read and interpret almost all blueprint dimensions, symbols, and notes Document counts Organize, clean, and maintain work area Complete discrepant tag information Communicate with Engineering on issues, needs, and improvements Perform All Set Ups Other functions as deemed appropriate

Temp Independently setup and operate Mill Turn, Swiss, CNC Mill and CNC Lathes with minimal occasional assistance. Follow supervisor or lead verbal directions. Competent in completing set ups (including 4th axis operations). Able to adjust feed and speed to meet surface finish requirements, adjust tool offsets and/or CDC compensation in order to meet drawing requirements of +/-.0005. Able to inspect first piece article, read and understand programs. Competent in removing worn cutting tools, re-grinding to conform to drawing requirements, and replacing. For internal candidates, a minimum 12 months experience as a Level 5 Operator is required. Key Responsibilities: · Setup and operate multiple machines simultaneously; · Checks parts to maintain quality production; · Trains / Assists other team members on tasks as required; · Performs regular manual tasks; · Insures that output normally equals or exceed that expected; · Keeps quality up to acceptable standards with little discrepant work; · Performs tasks equal to or exceeding established standards; · Working consistently, working overtime and traveling as required; · Conducts himself/herself in a business-like and civil manner; · Ability to react to change productively and perform other essential tasks assigned; · May fill in for area lead as required

Fluidra is looking for a CNC Programmer/Machinist to join our team in Phoenix, AZ. The CNC Programmer will be responsible for setting up, operating, and maintaining VMC 3 & 4th Axis, Swiss Type Machining, and CNC multi-spindle lathes with live tooling to produce high-precision components. This role requires a detail-oriented individual with strong technical expertise to meet rigorous quality and production standards in a fast-paced environment. WHAT YOU WILL CONTRIBUTE · Set up and operate VMC, Swiss, and CNC lathes in accordance with engineering drawings and work orders. · Interpret blueprints, technical drawings, and programming instructions to ensure accurate machine settings and production processes. · Monitor machine operations, perform routine inspections, and make necessary adjustments to maintain quality standards. · Conduct regular maintenance and troubleshoot issues to minimize downtime and ensure optimal machine performance. · Use precision measuring tools (calipers, micrometers, gauges) to verify product dimensions and tolerances. · Maintain detailed production records, including machine logs, output data, and any deviations or issues encountered. · Create standard work instructions to assist with the setup of new and existing programs. · Choose appropriate tooling for machining operations with correct cutting parameters. · Troubleshoot CNC programs and implement process improvements. · Edit G-code manually and create custom post-processors for CAM programs to ensure optimal machine performance and accuracy. · Adhere to all safety protocols and company policies to maintain a safe working environment. · Collaborate with supervisors and quality control to ensure production goals and quality standards are consistently met. WHAT WE SEEK · Trade school certification in Milling, Turning, and Swiss machining with a minimum of 2 years direct experience, or 4 years of direct experience operating CNC Milling, Turning, Swiss machining. · Minimum of 3 years' experience with Mastercam and SolidWorks. · Proficient in reading and interpreting blueprints, technical drawings, and CNC programming instructions. · Strong mechanical aptitude and troubleshooting skills. · Experience using precision measuring instruments to verify product quality. · Detail-oriented with excellent problem-solving abilities. · Ability to work effectively both independently and as part of a team. · Good communication skills and commitment to safety. · Ability to stand for extended periods and perform repetitive tasks. · Familiarity with Haas, Citizen, and DMG Mori Seki machines is a plus. WHAT WE OFFER An exciting opportunity to dive in and begin your career with a company that offers a competitive total rewards package that includes: · Full range of health benefits including medical, dental & vision, short & long-term disability · Paid vacation, 11 paid Holidays · 401(K) matching (100% of first 3% contributed, 50% of the next 2%) · Health and wellness programs / gym reimbursement · Educational assistance up to $7,000 per year · Company sponsored FUN events! · Generous product discounts WHO WE ARE Fluidra is a publicly listed company focused on developing innovative products, services and IoT solutions for the residential, commercial and wellness pool markets, globally. The company operates in over 45 countries, has over 7,000 employees and owns a portfolio of some of the industry's most recognized and trusted brands: Polaris , Jandy , CMP, S.R. Smith, and Zodiac . We also sell products under the Cover‐Pools , iAquaLink , Grand Effects , Del and Nature2 names. With these combined resources we're able accelerate innovation in critical areas like energy-efficiency, robotics and the Internet of Things. Our focus is on creating the perfect pool and wellness experience responsibly. We take our mission to heart, and our employees embody these guiding principles in everything we do: passion for success, honesty & trust, customer collaboration, teamwork and inclusion, learn and adapt, excellence and innovation. Don't meet every single requirement listed? At Fluidra, we thrive on building an inclusive workspace, so if you are excited about this role and your past experience doesn't align perfectly, we encourage you to apply anyways! You may be just the right candidate for this role or another role in the organization. Fluidra is proud to be an equal opportunity employer. Fluidra recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, or any legally protected characteristic. #onsite #zip

Perform rebuild and repair machining work as required. Repair or rebuild worn and failed parts requiring welding reconstruction and/or machining. ESSENTIAL FUNCTIONS: Ability to set up machines and run the machining job. Metal spray or HVC processes as required. Perform reboring, rebuilding, resurfacing, magnafluxing and grinding as needed. Prepare service reports. Plan and control cost of repair jobs. Machined parts are within specified tolerances. Maintain company equipment - keep in good clean orderly condition. Work safely at all times. Adhere to all applicable safety policies. Comply with all company policies, procedures, and standards. ADDITIONAL RESPONSIBILITIES: Maintain quality work standards. Set up and operate equipment as required. Comprehend and interpret sketches and diagrams Operate stripping and finishing machines Keep records, provide data, and submit reports Weld structural components as needed. Work overtime as needed. Travel to remote locations as needed. Perform other related duties as assigned. Work within and promote corporate values. KNOWLEDGE SKILLS AND ABILITIES: In-depth knowledge of general machining equipment. Previous experience in thermal spray and/or lathe. Extensive prior experience in welding and machining. Appropriate manner, conduct, and grooming adhere to company policy. Ability to work cooperatively and communicate effectively. Must have acceptable attendance to meet all company standards and requirements. EDUCATION AND EXPERIENCE: High school diploma or General Education Degree (GED). Current driver's license. Minimum of 6 months related experience Must be able to communicate (speak, read, comprehend, write) in English. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands, and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop and kneel. The employee is occasionally required to lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. May be required to operate a forklift with appropriate certification(s). This position is designated as a "Safety-Sensitive Position". A Safety-Sensitive Position includes tasks or duties that EMPIRE in good faith believes could affect the safety or health of the employee performing the task or others. WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; and outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, extreme cold, and extreme heat. The noise level in the work environment is usually loud.

Job DescriptionDescription: Purpose of Function: This role primarily operates CNC lathes, running parts according to engineering drawings and responsible for certification. but you'll also receive cross-training to support other manufacturing areas. If you like learning new skills, staying busy, and contributing wherever the team needs you, this is a great fit. Main Tasks/Responsibilities/Authorities: Main Tasks: Review production orders to verify correct specifications Set up lathe and operate per specifications Maintain all logs Responsibilities: Maintain a clean and safe work environment Alert Manager of any repair needs of other areas of concern with regard to the facility Troubleshoot and repair manufacturing equipment Assist in manufacturing processes as directed Assist in engineering processes as directed Perform a variety of tasks to support the day-to-day operations of the business, including cross-functional support Requirements: Function Requirements: (education, experience, competences, etc) The Lathe technician should have a high school degree or equivalent. Prior experience in a manufacturing technician role, following work instructions and using a lathe is required.

CNC Lathe Operator Aerospace & Defense Manufacturing Shift: Day shift or Night Shift REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: Setup & operate to produce high precision aerospace components on ferrous and non-ferrous materials Daily machine maintenance (checking fluid levels, cleaning out chips, etc.) Maintaining a clean and organized work space Tool management, entering in offsets to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars. Etc.) Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.) Maintaining correct part counts on the MOT for the operations performed Ability to hold tolerances of .0002” - .0005” while maintaining a high level of productivity Able to work independently and stay on task - operate 2 machines regularly Ability to problem solve and communicate process improvement suggestions with management Communicate any job-related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification Reporting all machine collisions and malfunctions to lead personnel Required Skills/Abilities: Familiarity with Mazak machines a plus Proficient with standard types of measuring inspection equipment to verify machined dimensions or product - Indicating Micrometers, Bore Gages, Sunnen Gage, & Test Indicators Read and interpret of B/P's including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards and following directions Ability to read and interrupt G & M machine codes and program understanding is a plus Experience holding tolerances of .0002” - .0005” and surface finish requirements of 16 is a plus Strong attention to detail, quality-focused, and willing to learn General knowledge of standard shop practices and equipment Basic Qualifications: High School or GED 5+ years' experience preferred but not required Ability to use computer software, company ERP system, clocking in and out of jobs, etc. Familiarity with Mazak machines a plus Familiarity with live tooling a plus Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Our Prescott location is looking for a Full Time 2nd shift Lathe Machinist Job Title: CNC Machine Operator -2nd Shift The CNC Machine Operator is responsible for setting up, operating, and maintaining CNC machines to produce precision aerospace components according to engineering specifications and quality standards. This role requires attention to detail, strong mechanical aptitude, and adherence to safety and compliance standards. Job Duties and Responsibilities: Set up CNC machines-Lathes by installing and adjusting fixtures, tools and workpieces. Load raw materials into the machine and adjust machine controls to ensure proper alignment. Interpret technical drawings, and blueprints to understand machining requirements. Input and modify CNC programs using G-code as necessary to meet design specifications. Operate machines to produce aerospace components with high precision. Perform in-process inspections using calipers, micrometers, and our measurement tools to ensure parts meet strict tolerance. Complete required documentation, including quality reports and production logs. Conduct routine maintenance and cleaning of machines to ensure optimal performance. Identify and report equipment malfunctions or repair needs promptly. Adhere to all safety protocols and procedures to maintain a safe working environment. Ensure compliance with aerospace industry standards and regulations, including AS9100 and ISO9000. Work closely with engineers, quality control personnel, and other team members to resolve issues and optimize processes. Provide feedback on production efficiency and suggest improvements. Job Requirements and Minimum Qualifications: High school diploma or equivalent required. 1 year of experience operating CNC machines, preferably in an aerospace manufacturing environment. Proficiency in reading and interpreting blueprints and engineering drawings. Familiarity with CNC programming languages (e.g., G-code, M-code). Knowledge of precision measurement tools and techniques. Strong problem-solving skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Ability to lift to 50 lbs. and stand for extended periods. Manual dexterity and visual acuity to perform detailed work. Compensation & Benefits: This is a full-time position with a competitive hourly wage .Expected weekly hours: 40-50. We offer a competitive benefit package, including health and disability insurance, 401(k) match, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on the date of hire, schedule type, and the applicability of collective bargaining agreements, among other factors. Must be willing and able to work onsite full-time in Prescott, AZ. This position is not eligible for relocation. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment, and we do not tolerate workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Our client is looking for a Manual Machinist to join the team in Tucson, AZ. The Manual Machinist role is responsible to perform basic lathe/milling operations by utilizing medium size machines including manual lathes/mills and inspect basic/routine parts for defects and wear. Please note: This position requires vocation skills and is not a machine operator or CNC Machinist. Here's What You'll Do: • Perform milling operations such as drilling, tapping, boring, broaching, and conventional milling and lathe work using various engine lathes including but not limited to horizontal and vertical mills and horizontal boring mills. • Use measuring devices and techniques to ensure proper sizing. • Record data to produce expected service and/or design results including sizing and illustrations. • Understand materials and their various applications in order to complete job. • Use various hand-held and stationary power and non-power tools including but not limited to band saws, belt sanders, hand grinders, and files to complete job. • Lift, tighten, adjust and/or secure heavy objects in order to perform work and observe safety precautions. Requirements Here's What You'll Need: • High school diploma or equivalent,. • 3 years of machinist experience and/or machine trades technical schooling • Basic mechanical knowledge required • Ability to read, write, and comprehend basic written and verbal instructions • Ability to understand, perform, and retain various job related training, operational, and safety procedures • Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards • Ability to operate overhead cranes, fork lift trucks, and other equipment

As a Machinist - Level 2 (FAA) here at Honeywell, you will be responsible for performing machining operations to produce high-quality components while ensuring adherence to safety and quality standards. Your skills will contribute to the efficiency and effectiveness of our repair and overhaul processes, playing a vital role in meeting customer demands and production goals. You will report directly to our ISC Production Supervisor and you'll work out of our Phoenix, Arizona location on an onsite work schedule. In this role, you will impact the overall productivity and quality of our repair and overhaul operations by utilizing your machining expertise to produce precise components and support the maintenance of our equipment. KEY RESPONSIBILITIES Set up and operate various machining equipment, including lathes, mills, and grinders, to produce components according to specifications. Read and interpret blueprints, technical drawings, and work orders to determine machining requirements. Perform routine maintenance and troubleshooting on machining equipment to ensure optimal performance. Inspect finished products for quality and accuracy, making adjustments as necessary to meet specifications. Collaborate with team members to improve processes and enhance operational efficiency. BENEFITS OF WORKING FOR HONEYWELL In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Posting Date: October 24, 2025. U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. FAA REQUIREMENTS All applicants for placement in DOT/FAA safety-sensitive positions will be required to submit to a pre-employment drug test, testing for Marijuana, Cocaine, Amphetamines (amphetamine, methamphetamine, MDMA, MDA), Phencyclidine (PCP), and Opioids (codeine, heroin, morphine, oxycodone, oxymorphone, hydrocodone, hydromorphone). The DOT/FAA regulations require all employees, regular and temporary, in safety-sensitive positions, to be included in the Honeywell Anti-drug and Alcohol Misuse Prevention Plan. ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here THE BUSINESS UNIT Honeywell Aerospace Technologies provides advanced aerospace solutions and services that enhance the safety, efficiency, and performance of aircraft and spacecraft. Our commitment to innovation and excellence positions us as a leader in the aerospace industry, delivering cutting-edge technologies that meet the evolving needs of our customers. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity: click here YOU MUST HAVE Minimum of 2 years of experience in machining processes and operations. Strong technical knowledge of machining equipment and tools. Proficiency in reading and interpreting blueprints and technical drawings. Experience with quality control processes and inspection techniques. Familiarity with safety regulations and best practices in a machining environment. WE VALUE Bachelor's degree in Mechanical Engineering or a related field. Experience in repair and overhaul processes. Strong problem-solving skills and attention to detail. Ability to work under pressure and meet tight deadlines. Continuous learning mindset and willingness to adapt to new technologies.

As a **Machinist - Level 2 (FAA)** here at Honeywell, you will be responsible for performing machining operations to produce high-quality components while ensuring adherence to safety and quality standards. Your skills will contribute to the efficiency and effectiveness of our repair and overhaul processes, playing a vital role in meeting customer demands and production goals. You will report directly to our **ISC Production Supervisor,** and you'll work out of our **Phoenix, Arizona** location on an **onsite** work schedule. In this role, you will impact the overall productivity and quality of our repair and overhaul operations by utilizing your machining expertise to produce precise components and support the maintenance of our equipment. **KEY RESPONSIBILITIES** + Set up and operate various machining equipment, including lathes, mills, and grinders, to produce components according to specifications. + Read and interpret blueprints, technical drawings, and work orders to determine machining requirements. + Perform routine maintenance and troubleshooting on machining equipment to ensure optimal performance. + Inspect finished products for quality and accuracy, making adjustments as necessary to meet specifications. + Collaborate with team members to improve processes and enhance operational efficiency. **YOU MUST HAVE** + Minimum of 2 years of experience in machining processes and operations. + Strong technical knowledge of machining equipment and tools. + Proficiency in reading and interpreting blueprints and technical drawings. + Experience with quality control processes and inspection techniques. + Familiarity with safety regulations and best practices in a machining environment. **WE VALUE** + Bachelor's degree in Mechanical Engineering or a related field. + Experience in repair and overhaul processes. + Strong problem-solving skills and attention to detail. + Ability to work under pressure and meet tight deadlines. + Continuous learning mindset and willingness to adapt to new technologies. **BENEFITS OF WORKING FOR HONEYWELL** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: click here (******************************** The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **U.S. PERSON REQUIREMENTS** Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. **FAA REQUIREMENTS** All applicants for placement in DOT/FAA safety-sensitive positions will be required to submit to a pre-employment drug test, testing for Marijuana, Cocaine, Amphetamines (amphetamine, methamphetamine, MDMA, MDA), Phencyclidine (PCP), and Opioids (codeine, heroin, morphine, oxycodone, oxymorphone, hydrocodone, hydromorphone). The DOT/FAA regulations require all employees, regular and temporary, in safety-sensitive positions, to be included in the Honeywell Anti-drug and Alcohol Misuse Prevention Plan. **ABOUT HONEYWELL** Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: click here (******************************** **THE BUSINESS UNIT** Honeywell Aerospace Technologies provides advanced aerospace solutions and services that enhance the safety, efficiency, and performance of aircraft and spacecraft. Our commitment to innovation and excellence positions us as a leader in the aerospace industry, delivering cutting-edge technologies that meet the evolving needs of our customers. _Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Learn more about inclusion and diversity:_ click here (***************************************************************** Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts, LLC is currently seeking to fill Manual Machinist positions. If you are interested, please email us your resume and call 602-666-6500 to schedule an interview appointment. Details: Set Up And operate manual machines. Works with precision specifications and work instructions. Responsibilities: Set up and operate manual machine. Ensure the quality of parts meet clients requirements and industry standards. Strong knowledge of geometric tolerance, blueprints and specifications Expert skill in precision measuring equipment Inspect finished product for defects Maintain equipment and ensure that all tools are being used safely. Comply with all safety policies and procedures Manage workflow to meet changing priorities Check accuracy Complete all preparation and clean up responsibilities before and after project completion. Requirements: Drug Screen (Required) Ability to pass a 7-year Background Check (Required) 5+ year of Manual Machine experience (Required) 5 years of Aerospace experience (Required) Maintain a positive and responsible work environment Ability to follow processes, be organized and punctual Motivated to be self-starter with the ability to also work in a team environment Contact Information: Staff Experts, LLC is an Equal Opportunity Employer. Contact Information: Staff Experts, LLC (Phoenix Branch) 7776 S. Pointe Parkway West, Suite 148 Phoenix, AZ 85044 602-666-6500 Office 602-391-2369 Fax www.staffexpertsinc.com

Job Title: Manual Machinist Company: Custom Control Sensors Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GED Experience: At least five years of experience in a similar aerospace industry or technical training is essential. Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits Medical Dental 401k with Match Employer funded Life Insurance and Long-term Disability Voluntary Short-term Disability Sick and Vacation Leave 9 Paid Holidays Job Description: The Manual Machinist utilizes parts, prints, drawings, travelers or engineering information in order to determine methods and sequences of operations needed to fabricate prototype components, jigs and fixtures within set tolerances. Key Responsibilities: Setup and operation of manual machinery such as lathes, mills, drill presses and surface grinders. Demonstrate knowledge of working properties of common metals. Select standard materials and equipment required for the job. Machining of complex precision parts to close specifications. Aligning and securing of holding fixtures, cutting tools, attachments, accessories and materials onto machines. Work well with leads of various company departments including engineering, weld shop, assembly and machine shop. Provide training to lower level machinists Maintain a clean and organized workspace. Skills and Requirements: Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident. Able to read and comprehend prints, engineering drawings and information in order to determine methods and sequences needed for completion Proficient knowledge of all machining equipment operations Manual dexterity to safely and proficiently utilize precision equipment, construct moderate to complex set-ups Able to work independently within established procedures associate within job function Good communication skills Ability to read, write and follow written and verbal instruction in English Ability to work well with only a modest amount of repeated instructions Be team oriented and possess flexibility and adaptability Conduct himself/herself in a business-like and civil manner Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, stand, use hands and fingers to flex and extend fingers with opposition of thumb; palmer grasp, talk or hear. The employee is frequently required to walk, bend stoop, reach, turn, twist, push, pull, and to move within all areas of the facilities and parking lots. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move over 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust and focus. An annual eye exam is required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.

The successful candidate will report to the Machining Supervisor and perform machining duties with the manufacturing environment. The Role Amphenol Aerospace Operations is seeking a CNC Machinist 3rd Shift to work out of its brand new, state-of-the-art facility in Mesa. The key responsibilities of this CNC Machinist include, but are not limited to: Is knowledgeable in CNC machining and secondary equipment Assists Production Supervisors with all aspects of KPI requirements (Safety, Quality, Delivery, Inventory and Cost) Active participant and advocate of Lean & 5S culture company wide Follows "in-process" quality inspections and works with team members to ensure total quality Aids in feedback to planning & engineering to optimize productivity Provides translation service for team members when required Ensure usage of correct gauging, hand measuring tools & metrology equipment to deliver the highest possible quality components for our customers Support preventative maintenance of equipment and report machine issues to production supervisor The Location Mesa, AZ 25 minutes from Phoenix, AZ The Person The key skills and qualities of a CNC Machinist at Amphenol Aerospace Operations: Minimum 2 years of lathe production experience on CNC & related production equipment Read and understand job layouts, blueprints, schematics and work from written and verbal job instructions on operations Strict time management with self and other employees to support a productive work environment. This includes providing hourly production stats to shift supervisor & implementing quick corrective actions to help team members reach their goals Excellent attendance Ability to communicate with and collaborate with team members Intermediate computer skills Ability to work on a busy manufacturing floor The Company With manufacturing sites in Sidney, NY, Mesa, AZ, Nogales, MX, and a Design Center in Pasadena, CA, Amphenol Aerospace Operations has been a leader in designing and manufacturing electrical components for the aviation and commercial airplane industry for 100 years. Focusing on serving the needs of advanced and challenging market segments, we pride ourselves on our consistent ability to innovate and provide the markets with new creative solutions. Working at Amphenol means you are recognized and valued for your contributions because we believe that our human capital is the most valuable asset we have. We support and encourage career development for all employees and have ample opportunities for advancement. We pride ourselves for being customer-centric, accountable, reliable, and enthusiastic in all that we do. These values are ingrained in each of us and contribute to a culture of teamwork and meaningful work. Amphenol offers a competitive salary and benefits. The candidate must be able to legally work in the United States; we are unable to provide sponsorship. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol - Making History, Designing the Future

Job Description CNC Lathe Operator NIGHT SHIFT (20% Pay differential) Aerospace & Defense Manufacturing Shift: Night Shift REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: Setup & operate to produce high precision aerospace components on ferrous and non-ferrous materials Daily machine maintenance (checking fluid levels, cleaning out chips, etc.) Maintaining a clean and organized work space Tool management, entering in offsets to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars. Etc.) Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.) Maintaining correct part counts on the MOT for the operations performed Ability to hold tolerances of .0002” - .0005” while maintaining a high level of productivity Able to work independently and stay on task - operate 2 machines regularly Ability to problem solve and communicate process improvement suggestions with management Communicate any job-related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification Reporting all machine collisions and malfunctions to lead personnel Required Skills/Abilities: Familiarity with Mazak machines a plus Proficient with standard types of measuring inspection equipment to verify machined dimensions or product - Indicating Micrometers, Bore Gages, Sunnen Gage, & Test Indicators Read and interpret of B/P's including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards and following directions Ability to read and interrupt G & M machine codes and program understanding is a plus Experience holding tolerances of .0002” - .0005” and surface finish requirements of 16 is a plus Strong attention to detail, quality-focused, and willing to learn General knowledge of standard shop practices and equipment Basic Qualifications: High School or GED 5+ years' experience preferred but not required Ability to use computer software, company ERP system, clocking in and out of jobs, etc. Familiarity with Mazak machines a plus Familiarity with live tooling a plus Must be able to stand for the majority of the work shift Team oriented company with top paying wages and benefits in the valley in regards to the Aerospace Industry. To qualify for consideration, all candidates must be able to work 40+ hours per week in a fast paced, high-demand, quality environment. All candidates must also have sufficient verbal and written communication skills as well as good problem solving skills. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: The Civil Rights Act of 1964 as Amended Age Discrimination Act of 1967 as Amended Rehabilitation Act of 1973 Vietnam Era Veterans Readjustment Act of 1974 Americans with Disabilities Act Amendment Act of 2009 (ADAAA) The Wagner-Peyser Act as Amended. The Workforce Innovation and Opportunity Act Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Title: Manual Machinist Company: Custom Control Sensors Employee Type: Full Time, Non-Exempt Industry: Manufacturing Education: High School Diploma or equivalent GED Experience: At least five years of experience in a similar aerospace industry or technical training is essential. Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits Medical Dental 401k with Match Employer funded Life Insurance and Long-term Disability Voluntary Short-term Disability Sick and Vacation Leave 9 Paid Holidays Job Description: The Manual Machinist utilizes parts, prints, drawings, travelers or engineering information in order to determine methods and sequences of operations needed to fabricate prototype components, jigs and fixtures within set tolerances. Key Responsibilities: Setup and operation of manual machinery such as lathes, mills, drill presses and surface grinders. Demonstrate knowledge of working properties of common metals. Select standard materials and equipment required for the job. Machining of complex precision parts to close specifications. Aligning and securing of holding fixtures, cutting tools, attachments, accessories and materials onto machines. Work well with leads of various company departments including engineering, weld shop, assembly and machine shop. Provide training to lower level machinists Maintain a clean and organized workspace. Skills and Requirements: Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident. Able to read and comprehend prints, engineering drawings and information in order to determine methods and sequences needed for completion Proficient knowledge of all machining equipment operations Manual dexterity to safely and proficiently utilize precision equipment, construct moderate to complex set-ups Able to work independently within established procedures associate within job function Good communication skills Ability to read, write and follow written and verbal instruction in English Ability to work well with only a modest amount of repeated instructions Be team oriented and possess flexibility and adaptability Conduct himself/herself in a business-like and civil manner Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to sit, stand, use hands and fingers to flex and extend fingers with opposition of thumb; palmer grasp, talk or hear. The employee is frequently required to walk, bend stoop, reach, turn, twist, push, pull, and to move within all areas of the facilities and parking lots. A computer is used to access, input, and retrieve data. The employee must occasionally lift and/or move over 20 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, color vision, depth perception, and the ability to adjust and focus. An annual eye exam is required. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies.