Computer numerical controller machinist jobs in Chino, CA - 405 jobs

Work schedule: 1st shift QUALIFICATIONS 3+ years of experience in setting up, operating, and programming CNC Machines SolidCam, SolidWorks, or MasterCam is preferred Job Description The CNC Machinist is responsible for programming, setting up, and operating CNC equipment - including Haas mills, lathes, and CNC Swiss-type machines - to produce precision components according to engineering drawings and specifications. This is a hands-on programming and machining role, requiring the ability to take parts from print to finished product. PRIMARY DUTIES AND RESPONSIBILITIES Independently program, set up, and operate Haas CNC mills, lathes, and CNC Swiss-type lathes. Use SolidWorks and SolidCAM to create CNC programs, toolpaths, and machining strategies. Input, edit, and optimize G-code/M-code directly at the terminal or machine as needed. Select and install tooling, fixtures, and work holding devices. Perform first article inspections and verify part dimensions using precision measuring tools (calipers, micrometers, gauges, CMM if applicable). Troubleshoot and resolve machining issues related to tooling, speeds/feeds, and part quality. Perform routine maintenance on machines and keep work area clean and organized. Collaborate with engineers and quality inspectors to improve processes and resolve issues. Maintain accurate documentation of setups, programs, and production runs. Follow safety protocols and shop procedures. EDUCATION AND TRAINING High School diploma or equivalent (technical/vocational training preferred). Must be able to independently program CNC mills, lathes, and Swiss-type machines Proficiency in SolidWorks and SolidCAM for part modeling and CNC programming. Strong knowledge of CNC programming fundamentals, toolpath strategies, and machine controls (Haas preferred). Ability to read and interpret engineering drawings, GD&T, and machining symbols. Skilled in the use of precision measuring instruments. Strong troubleshooting skills, problem-solving ability, and mechanical aptitude. EXPERIENCE 3-5 years of CNC machining experience in an AS9100 or ISO9001 environment. Proficiency in SolidWorks CAD software. PHYSICAL REQUIREMENTS Must be independently mobile while performing job duties. Regularly required to interact with a computer and communicate with peers and co-workers. Ability to lift and/or move up to 50 pounds and stand for extended periods. May require overtime or shift flexibility depending on production demand. Comply with U.S. regulations; this position requires candidates to be a U.S. Person or Protected Individual per 8 U.S.C. 1324b(a)(3).

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Responsibilities of the Manual Machinist include, but are not limited to: Review samples, drawings or instructions to understand specifications of output Plan the sequence of necessary actions for the completion of a job Take measurements and mark material for cutting or shaping Select appropriate machines (e.g. lathes) and position or load material for a job Determine and program size of batches, speed of machine etc. Monitor machine while working to adjust the feed, maintain temperature and identify issues Check output to ensure consistency with specifications and discard defects Keep records of approved and defective units or final products Perform routine machine maintenance and repair minor damages Qualifications of the ManualMachinist include, but are not limited to: Proven experience as machinist Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Ability to use precision tools (e.g. calipers) to take accurate measurements Knowledge of the properties of metal and other material Ability to read blueprints, schematics and manuals Good at math with analytical abilities Physical stamina and strength to lift heavy items Acceptable driving record, according to company guidelines. High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset #zrjj Additional Information Physical Demand: Must be able to lift up to 50 lbs. unassisted. Pay: $25 - $55 DOE Working Conditions: Shop Environment Training/Certifications: N/A Shift Time/Overtime: Day Shift 6 am to 6 pm Travel: N/A Education: HS Diploma or GED DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role: The Machinist will set up and operate OD/ID gear grinding machines to correct R/O, perpendicularity, parallelism, concentricity on shafts, splines, and gears (spur, helical, and double helical). What You Will Do: Follow specific instructions to set up and operate OD/ID grinding machines and to operate associated wheel dress and balancing equipment (60% of job) Use a variety of hand tools, gauges and dial indicators to install involute cams, yokes, arbors, work piece, etc. Use optical equipment to present wheel dresser tools; balance and dress wheels as required, indicate work piece between bench centers prior to loading grinder and make any other adjustments and/or calculations necessary to meet quality standards (20% of job) Check and monitor machine operations, check finished part prior to unloading and obtain any required dimensional verification. Visually check parts for finish, and for indications of surface burn or tempering (10-15% of job) Maintain records of all finish dimensions and obtain inspection acceptance of finished part Perform other related work of a comparable or lower skill level as related to gear machining and check work of other operators as required Perform operator checklist as required and comply with all EH&S procedures As required segregate waste material and follow good housekeeping practices May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills What You Have: High School Diploma, GED or equivalent Make calculations involving shop mathematics and handbook formulas including algebra and trigonometry Use precision instruments such as dial indicators, micrometers, height gages, snap gages, ring gages and gear measuring wires Equivalent to 2 years high school plus 2 to 3 years trades training Experience 1 to 2 years Must be willing to work any shift Preferred Candidates will have the following: CNC Experience with ability to program Have working knowledge of GD&T Summary Pay Range: $30.15 - $45.23 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. Medical, dental, and vision benefits* Paid time off plan (Vacation, Holidays, Volunteer, etc.)* 401(k) savings plans* Health Savings Account (HSA)* Flexible Spending Accounts (FSAs)* Health Lifestyle Programs* Employee Assistance Program* Voluntary Benefits and Employee Discounts* Career Development* Incentive bonus* Disability benefits Life Insurance Parental leave Adoption benefits Tuition Reimbursement Sign on bonus * These benefits also apply to part-time employees Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** For any position that will require you to work two or more hours per week on average within the unincorporated areas of Los Angeles County, please note that the Company will consider qualified applicants with arrest or conviction records in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! CNC MACHINIST III / SENIOR - D SHIFT Based out of Rocket Lab Headquarters in Long Beach, California the CNC Machinist III / Senior will maintain, set up and operate the CNC machines to build flight-ready hardware that meet Rocket Lab specification at the needed rate. WHAT YOU'LL GET TO DO: Work with CNC lathe and mill machines Read and translate drawings/CAD models Provide feedback to improve work instructions Work with CNC programmer to maintain tolerances Work to reduce any non-conformances found by quality or engineering. Provide improvement ideas on batch sizes, setups, tool selection etc. Track calibration and maintenance of all equipment and tooling in the area. (This position can be hired as a CNC Machinist III or Senior CNC Machinist Level) YOU'LL BRING THESE QUALIFICATIONS AS A CNC MACHINIST III: 5+ years of experience with CNC operation on lathe and mills Demonstrated ability using Lathes: Dual Spindle (Live Tooling) Demonstrated ability using Mills: Turning 5th Axis. Demonstrated ability to interpret drawings, GD&T YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR CNC MACHINIST: 8+ years of experience with CNC operation on lathe and mills Demonstrated ability using Lathes: Dual Spindle (Live Tooling) Demonstrated ability using Mills: Turning 5th axis Demonstrated ability to interpret drawings, GD&T. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: CNC programming experience - NX Programming Experience in an Aerospace Manufacturing Environment 5-axis CNC operation and setup Competent navigating DMG Mori Machines: DMU 50,85,125, NLX 2500-4000 Experience using Siemens, Fanuc and Celos Controls Experience using bar feeders Manual Programming ADDITIONAL REQUIREMENTS: Willing to work D Shift (Friday - Sunday 3:15pm - 1:45am) Ability to travel and communicate outside of work hours Must be able to work extended hours and/or weekends as needed Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Must be able to lift up to 25lbs. unassisted. PAY RANGE: $35 - 50 Per Hour Plus Shift Differential Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$35-$50 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Hourly Pay Range: $37.25-$41.00 **All Applicants must comply with ITAR Requirements. US Citizens or Permanent Residents only** Summary: Reporting to the Head of Machining Operations, the Machinist III is responsible for operating manual and CNC machine tools, including 5-axis gantry mills, vertical and horizontal milling centers, horizontal and vertical turning centers, etc. in support of production and development machining. Critical thinking and collaboration are required to evaluate and resolve unique equipment and product issues in a demanding production environment. Core Responsibilities: All functions of a Machinist II Communicate with other departments to keep product flowing Ensure the personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Proper selection of tools per application Apply understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Apply advanced understanding of probe cycles and functions Read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that do not require CMM, GOM, VeriSerf layout Additional Responsibilities: Other duties as assigned Qualifications: Must be able to comply with ITAR and EAR residency requirements Demonstrated knowledge of machining procedures and practices Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proven track record of operating safe facilities. Fluent in English; Bi-lingual is a plus Education/Experience: High school diploma or equivalent A minimum of 5 years of experience in a manufacturing environment operating CNC mills and lathes. (with) completion of vocational training or an apprenticeship Skills: Required: All skills required of a Machinist II Effective communication techniques for collaboration with other departments Methods for ensuring personnel and equipment are available to achieve the safety, quality, and productivity standards of the workcenter Demonstrate proper selection of tools per application Understanding of CAM programs including but not limited to: Mastercam, Fusion 360 Advanced understanding of probe cycles and functions Ability to read and interpret customer and internal drawings related to checking parts Inspect 1st article parts that don't require CMM, GOM, VeriSerf layout

Radiant is an El Segundo, CA-based startup building the world's first mass-produced, portable nuclear microreactors. The company's first reactor, Kaleidos, is a 1-megawatt failsafe microreactor that can be transported anywhere power is needed and run for up to five years without the need to refuel. Portable nuclear power with rapid deploy capability can replace similar-sized diesel generators, and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant's unique, practical approach to nuclear development utilizes modern software engineering to rapidly achieve safe, factory-built microreactors that leverage existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor next year at the Idaho National Laboratory, with initial customer deliveries beginning in 2028. Senior Engineering Technician Radiant is seeking an CNC Programmer and Machinist who will contribute to the development of our microreactor unit. you'll be a key contributor to Radiant, programming, setting up, and operating CNC machines to produce precision components that power our most critical systems. You'll translate engineering designs into high-quality, manufacturable parts ensuring accuracy, efficiency, and innovation at every step. This role requires hands-on experience with CNC machining, a deep understanding of G-code and CAM software, and a passion for solving complex manufacturing challenges. You'll work closely with engineers, machinists, and quality teams to push the limits of what's possible in precision manufacturing. Responsibilities and Duties: Develop and optimize CNC programs for 3-axis, 4-axis, and 5-axis mills, lathes, and multi-axis machining centers. Set up and operate CNC equipment to validate new programs and processes. Read and interpret complex engineering drawings, 3D models, and GD&T specifications. Collaborate with design and manufacturing engineers to improve part manufacturability and reduce cycle times. Select proper tooling, workholding, and cutting parameters for a variety of materials (aluminum, titanium, stainless steel, Inconel, etc.). Troubleshoot machining and programming issues on the floor to maintain high-quality output and machine uptime. Continuously improve machining processes through data-driven feedback and experimentation. Maintain adherence to safety and quality standards across all machining operations. Support additional technician duties or cross-functional shop activities as needed based to achieve company priorities. Required Skills and Qualifications: 5+ years of experience in CNC machining and programming in a precision manufacturing or aerospace environment. Proficiency in CAM software (e.g., Mastercam, Siemens NX, Fusion 360, or CATIA). Strong understanding of G-code, M-code, feeds, speeds, and toolpath strategies. Hands-on experience setting up and operating mills, lathes, and multi-axis machining centers. Ability to interpret complex technical drawings, GD&T, and 3D CAD models. Proven ability to take a part from print to finished component. Strong problem-solving skills and attention to detail. Desired Skills and Qualifications: Experience with 5-axis machining and post-processor development. Familiarity with aerospace or high-performance hardware manufacturing. Experience with exotic materials (e.g., titanium, Inconel, carbon composites). Working knowledge of ERP/MES systems and digital manufacturing workflows. Additional Requirements: Must be willing to work extended hours and weekends as necessary to achieve company goals. Must work 100% onsite at El Segundo HQ. Total Compensation and Benefits Radiant's new hire compensation package includes base salary, substantial equity grants, and comprehensive benefits. Total compensation and level are determined through a holistic evaluation of your interview performance, experience, education, and qualifications. Benefits and Perks for Eligible Employees: Stock: Substantial incentive stock plan for all full-time employees. Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. One Medical: Sponsored memberships for employees and their dependents. Vision: 100% top tier plan coverage + 50% for dependents. Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. Daily catered lunch. Free snacks and drinks. Flexible PTO policy. Remote workday allocation. Company and team-bonding events, happy hours and in-person camaraderie. Beautiful El Segundo headquarters close to the Pacific Ocean. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls.

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: Set up and operate Speed Lathes, Hone, and occasionally CNC lathes in order to meet daily production and quality requirements. Follow company quality control standards to include in-process inspection and documentation. Must model safe behaviors. Must have evening availability for 2 nd Shift from 3:30pm until 12:00am. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: High school diploma or General Education Degree (GED) required. Experience: Must have at least two years of current CNC lathe setup experience. Formal CNC training experience preferred. Knowledge/Skills/Abilities: Ability to interpret blueprints, setup machines, edit offsets within programs, and perform tool offset adjustments as required to machine specialty bearings. Ability to perform inspections of dimensions machined, including threads, inner diameters, outer diameters, lengths, widths, and undercuts/grooves. Ability to read and interpret engineering prints. Ability to make decisions, communicate effectively, and work well with others in a team environment. Must be a quick learner. Ability to give, receive, and follow written and verbal instructions in English and communicate job related information to others. Physical & Environmental Factors: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $20 to 25/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #25.2-1/2

Job DescriptionDescription:Temp-to-hire The Mill Machinist is responsible for the set up and operation of CNC Mills to perform machining operations, such as turning, boring, threading and facing, on metallic or nonmetallic work pieces according to specifications for the aerospace and other industries.Duties and Responsibilities: Operate Set up Mori Seiki and/or HAAS Mills with Fanuc and HAAS controls. Make changes to offsets and change/touch off tools. Ability to read and explain Blueprints, Engineering Changes, and Manufacturing Instructions. Mathematics skills: Geometry, Algebra and Trigonometry. Comprehensive understanding of mechanical components, tooling and fixtures. Use of all measuring instruments including Dial Bore Gauge, Micrometer and Comparator. Comprehensive understanding of tool geometries, materials, and coatings. Must be knowledgeable in tooling selection and speeds / feeds. Problem solving skills. Accurately complete all required documents (Router, Production Inspection Report, Programs, etc.). Maintain a safe, clean and orderly work area. Must be able to be able to listen carefully to verbal and written instructions. Must be able to load material in and out of the machines. Must keep machine properly maintained. Any other duties as required. Physical Requirements: Ability to squat and kneel on an occasional basis. Ability to twist and bend the neck and waist on a constant basis. Ability to stand up to 10 hours per day. Ability to lift and carry up to 50 pounds on a constant basis. Monday-Friday7:30 am - 4:00 pm $25/hr. #PROD2

Job DescriptionSalary: $52-$58/hr Nikon AM Synergy Inc. is a cutting-edge provider of metal additive manufacturing (AM) solutions, specializing in the aerospace, defense (ultra-secure), and space industries. We focus on the manufacture and certification of production flight hardware, aiming to drive industry growth through the integration of AM technology. As a part of the Nikon Advanced Manufacturing Ecosystem, we leverage our engineering and manufacturing capabilities, alongside Nikon SLM Solutions and organic AM solutions, to push the boundaries of additive manufacturing in industry. Prototype Machinist The Prototype Machinist is responsible for programming and operating machinery to produce parts that conform to blueprints, adhering to GD&T specifications. This role involves working 35 axis machines, Wire EDM, as well as other pneumatic abrasive tools. A keen eye for detail and strong mechanical aptitude are essential. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs. Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001) for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience with Siemens NX CAM Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required

A Conventional and CNC Machinist that works from blueprints, rough sketches, and verbal instructions to fabricate a variety of complex machined components. Performs non-repetitive assignments of a complex and difficult nature, involving the setup and operation of a wide variety of machine tools, such as lathe, mill, grinder, drill press, hand tools and CNCs. Knows the working qualities of a wide variety of materials including aluminum, stainless steel, brass and other materials. Type of Position: Temporary to Hire Hourly Rate: $25.00 - $40.00 Duties and Responsibilities • Studies specifications, such as blueprints, sketches, models, or descriptions and visualizes product to determine materials required and machines to be used to fabricate parts • Computer dimensions, plans layout, and determines assembly method and sequence of operations •Works with Engineering team to determine best possible machining methods •Sets up and operates machine tools, such as lathes, milling machines and grinders to fabricate parts and verifies conformance of machined parts to specifications •Verifies dimensions, alignments and clearances using measuring instruments, such as dial indicators, gauge blocks, thickness gauges, and micrometers •May examine previously used tools, jigs, fixtures and designs and modify parts •Assists Manufacturing Engineering in design and development of production jigs and fixtures •Performs other related duties as required and assigned Education and Experience • High School diploma required • 5 years related to high volume production Machine Shop experience • Aerospace or manufacturing experience preferred • Ability to demonstrate hands-on capability with programming and machine • Strong organizational, interpersonal, and communication skills, both oral and written • Proven ability to adapt to fluctuating work assignments and fast paced environments • Detail-oriented with sound judgment, great follow-through and initiative • Demonstrated ability to work well in a team environment, proactive, and work independently • Proficient in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand and sit. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. ITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Hydra Electric Company is an Affirmative Action and Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email ********************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ******************** or call ************. This email and phone number are created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Equal Employment Opportunity Posters

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 2: 2-10:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) + $3.00 Shift Differential Responsibilities Operate and monitor assigned machinery and equipment according to established procedures and safety standards. Perform routine maintenance and cleaning of machines to ensure optimal performance. Read and interpret blueprints, work orders, or production schedules to determine job instructions. Inspect parts and finished products for quality and accuracy using measuring tools. Record production data, including output, downtime, and defects. Adjust machine settings as necessary to maintain product specifications and minimize waste. Collaborate with team members and supervisors to meet daily production goals. Report any mechanical issues or safety concerns to maintenance or supervisory staff. Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications High school diploma or GED is a plus; vocational or technical training preferred. Previous experience in a manufacturing or production environment is a plus. Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. Familiarity with machining processes such as cutting, drilling, or grinding. Mechanical aptitude and the ability to troubleshoot minor equipment issues. Basic math and measurement skills. Ability to read and interpret technical documents, blueprints, or schematics. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment. Willingness to work flexible hours or shifts as needed. Work Environment: Regular standing, bending, reaching, and lifting up to 50 lbs. Use of hands and manual dexterity for precise machining and tool work. Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Set up and be able to operate all machines within the machine shop Set up and operate lathes and mills Set up and operate economy pointer Set up and operate slotters Set up and operate air chamber Set up and operate fillet roll Set up and operate traubs Set up and operate dye machine Set up and operate drill press Set up and operate auto pin machine Set up and operate button die and c-sink Set up and operate cut off saw Set up and operate chop off press Be familiar with and able to use dial calipers, mic and SPC computer Qualifications-Education/Experience Required: Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required for this position Education and/or Experience-High school diploma or general education degree (GED), or five years related experience and/or training, or equivalent combination of education and applicable experience Language Skills-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability tow rite routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Be able to read and interpret blue prints. Reasoning Ability- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Preferred: Travel Requirements 0%

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 2: 2-10:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) + $3.00 Shift Differential Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

A leading provider of metal additive manufacturing (AM) solutions is seeking a Prototype Machinist to support its work in the aerospace, defense (ultra-secure), and space industries. The company focuses on the manufacture and certification of production flight hardware, driving industry growth through the integration of AM technology. Leveraging advanced engineering and manufacturing capabilities, they are pushing the boundaries of additive manufacturing in high-performance sectors. The Prototype Machinist will program and operate machinery to produce parts that conform to blueprints, following GD&T specifications. This includes working on 3-5 axis machines, Wire EDM, and various pneumatic abrasive tools. The role requires a strong mechanical aptitude, attention to detail, and the ability to deliver precision work. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs with Siemens NX CAM Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts.

Aerospace manufacturing company in Yorba Linda area is seeking CNC Operators experience in Swiss Lathes to join their team! A Lathe Machinist plays a crucial role in the manufacturing aspect of the organization. Primary responsibility is to produce components to specification that will ultimately support the assembly of aerospace latches to be delivered to customers. $25 - $32/hr 3:00pm - 2:30am + OT Mon - Fri + Sat OT Must be open to OT ESSENTIAL DUTIES - other duties may be assigned Sets Up and Operates Lathe Machines in a production environment to produce parts in accordance with specifications given by blueprints, dimensional data sheets, and work order package. Checks daily schedule (Dispatch List) to ensure what job(s) need to run for the day. Checks, maintains, lubricates, and degreases production machines and equipment Starts set-ups and adjusts tooling according to Manual or CNC program to meet specifications required. Loads parts at indicated loading stations for machining and performs periodic quality checks for conformance to specifications and planning documents. Checks and inspects own parts for quality ensuring parts meet correct specifications in accordance with blueprints and data dimensional sheets. Works under limited supervision. EDUCATION AND/OR EXPERIENCE REQUIRED High school diploma or General Educational Development (GED) equivalent; and Requires 3 to 6 years on-the-job machine shop experience; and/or Equivalent combination of education and experience. To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. Proficient in spoken and written English

A leading provider of metal additive manufacturing (AM) solutions is seeking a Prototype Machinist to support its work in the aerospace, defense (ultra-secure), and space industries. The company focuses on the manufacture and certification of production flight hardware, driving industry growth through the integration of AM technology. Leveraging advanced engineering and manufacturing capabilities, they are pushing the boundaries of additive manufacturing in high-performance sectors. The Prototype Machinist will program and operate machinery to produce parts that conform to blueprints, following GD&T specifications. This includes working on 3-5 axis machines, Wire EDM, and various pneumatic abrasive tools. The role requires a strong mechanical aptitude, attention to detail, and the ability to deliver precision work. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs with Siemens NX CAM Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001') for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required Compensation: $52-$58/hr #MCTA1

About Varda Low Earth orbit is open for business. Varda is accelerating the development of commercial space infrastructure, from in-orbit pharmaceutical processing to reliable and economical reentry capsules. From life-saving pharmaceuticals to more powerful fiber optics, there is a world of products used on Earth today that can only be manufactured in space. Varda is accelerating innovation in the orbital economy by creating both the products and infrastructure needed so space can directly benefit life on Earth. Our mission is to expand the economic bounds of humankind. Our team is uniquely suited to accomplishing this goal, with leadership and staff comprised of veterans from SpaceX, Blue Origin, major pharmaceutical companies and Silicon Valley. Varda was founded in January 2021 by Will Bruey and Delian Asparouhov with significant backing from world class investors including Khosla Ventures, Lux Capital, Founders Fund, Caffeinated Capital, General Catalyst, and Also Capital. Varda is headquartered in El Segundo, California, where we have offices and a production facility where our vehicles, equipment, and materials are built, integrated, and tested. Varda also has offices in Washington, DC and Huntsville, AL. Join Varda, and work to create a bustling in-space ecosystem. About this Role We are looking for a Senior 5-Axis CNC Programmer to join our Manufacturing Team. In this role, you will be machining complex, flight-critical components with extreme precision-contributing directly to spacecraft that will leave Earth and return with life-changing materials manufactured in microgravity. This is a hands-on, high-impact role in a non-production, prototype-driven environment where you will work with cutting-edge equipment, collaborate directly with engineers, and operate with full ownership of your machining processes. You'll be surrounded by industry veterans in a culture that values humility, speed, and craftsmanship. Our Work Environment Autonomy and ownership. Responsible for print-to-part. Independent projects. One-off prototyping work. You rarely work on the same part twice. New 5-axis CNC machines. Premium tooling. Generous tooling and inspection budget. No need for personal tools. Single shift. No one else touches your machine. Clear aerospace environment. Pristine floors. Onsite in El Segundo, CA. 40-45 hours per week (over-time available with approvals). Flexible hours and generous benefits. Key Responsibilities (1) Precision Machining Machine complex aerospace components on 5-axis mills (Haas UMC1000 etc.) to tolerances of ±0.0005 in. Execute the full print-to-part workflow with full autonomy, including CAM programming, custom fixturing, setup, machine operation, and inspection. Machine exotic materials such as PEEK, Inconel, stainless steel, and carbon composite materials. Design and execute custom fixturing and work-holding solutions for prototype parts. (2) CAM Programming & Optimization Program CAM toolpaths using software such as Mastercam, HSMworks. Incorporate probing strategies and macros to reduce setup time and increase accuracy. Continuously refine feeds, speeds, and tooling strategies to minimize cycle times while maintaining aerospace-grade quality. (3) Process Ownership & Engineering Collaboration Take end-to-end ownership of machining processes, including raw material selection, programming, setup, machining, inspection, and documentation. Collaborate with engineering teams to provide Design for Manufacturability (DFM) feedback. Develop and standardize best practices to improve shop efficiency and knowledge sharing. Basic Qualifications 5+ years of experience programming and operating 5-axis vertical machining centers (e.g., Haas UMC-1000/750, DMG MORI DMU, or similar) producing tight-tolerance aerospace or flight-critical components. Proficiency in Mastercam for 3+2 and full simultaneous 5-axis toolpaths, including simulation and verification. Deep understanding of G-code/M-code and advanced CNC program editing. Experience machining exotic materials and applying GD&T principles. Hands-on experience with precision inspection tools. U.S. citizenship or lawful permanent residency (ITAR compliance). Preferred Skills and Experience 10+ years of CNC machining experience, primarily in 5-axis milling environments. 5+ years of Mastercam experience, including post customization and optimization. Skilled in custom workholding and fixture design, including modular dovetail, vacuum, and Lang-style clamping systems for small-lot prototype work. Demonstrated mentorship or leadership within a high-precision machining environment. Familiarity with CNC lathes, mill-turn, or live-tooling equipment - nice to have but not required. Pay Range Pay range: $40.00 - $60.00+ per hour Leveling and base salary is determined by job-related skills, education level, experience level, and job performance You will be eligible for long-term incentives in the form of stock options and/or long-term cash awards ITAR Requirements Varda, like all employers, must ensure that its employees working in the United States are lawfully authorized to work in the U.S. Additionally, our employees are exposed to and have access to certain export-controlled items. At present, some of our technology to which employees have access requires a license to be exported to individuals other than “U.S. Persons” as defined in U.S. export regulations. Because our employees are provided access to export-controlled items, our current policy is to only hire “U.S. persons” who are permitted to have access to our technology without an export license. “US person” means: U.S. citizen, U.S. lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) (i.e., individual admitted to the U.S. as a refugee or granted asylum in the U.S.) Learn more about the ITAR here. Benefits Exciting team of professionals at the top of their field working by your side Equity in a fully funded space startup with potential for significant growth (interns excluded) 401(k) matching (interns excluded) Unlimited PTO (interns excluded) Health insurance, including Vision and Dental Lunch and snacks provided on site every day. Dinners provided twice a week. Maternity / Paternity leave (interns excluded) Varda Space Industries is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, martial status, mental or physical disability, or any other legally protected status. E-Verify Statement Varda Space Industries, Inc. participates in the U.S. Department of Homeland Security E-Verify program. The E-Verify program is an Internet-based employment eligibility verification system operated by the U.S. Citizenship and Immigration Services. Learn more about the E-Verify program. E-Verify Notice Right To Work Notice Read more Read more

Nikon AM Synergy Inc. is a cutting-edge provider of metal additive manufacturing (AM) solutions, specializing in the aerospace, defense (ultra-secure), and space industries. We focus on the manufacture and certification of production flight hardware, aiming to drive industry growth through the integration of AM technology. As a part of the Nikon Advanced Manufacturing Ecosystem, we leverage our engineering and manufacturing capabilities, alongside Nikon SLM Solutions and organic AM solutions, to push the boundaries of additive manufacturing in industry. Prototype Machinist The Prototype Machinist is responsible for programming and operating machinery to produce parts that conform to blueprints, adhering to GD&T specifications. This role involves working 3-5 axis machines, Wire EDM, as well as other pneumatic abrasive tools. A keen eye for detail and strong mechanical aptitude are essential. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs. Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001”) for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience with Siemens NX CAM Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required

Details: A leading provider of metal additive manufacturing (AM) solutions is seeking a Prototype Machinist to support its work in the aerospace, defense (ultra-secure), and space industries. The company focuses on the manufacture and certification of production flight hardware, driving industry growth through the integration of AM technology. Leveraging advanced engineering and manufacturing capabilities, they are pushing the boundaries of additive manufacturing in high-performance sectors. The Prototype Machinist will program and operate machinery to produce parts that conform to blueprints, following GD&T specifications. This includes working on 3-5 axis machines, Wire EDM, and various pneumatic abrasive tools. The role requires a strong mechanical aptitude, attention to detail, and the ability to deliver precision work. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs with Siemens NX CAM Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Details: Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001') for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required Compensation: $52-$58/hr #MCTA1