Computer numerical controller machinist jobs in Dayton, OH - 179 jobs

Akkodis is seeking a 2nd Shift CNC Manufacturing Supervisor for a direct hire job with a client in Columbus, OH. You will be responsible for leading and coordinating all 2nd shift machining operations. This role helps cultivate an environment of excellence, teamwork, and continuous improvement. You will direct Team Leads, Set-Up Technicians, Machinists, Operators, and supporting staff to ensure safe, high-quality, and efficient production. Rate Range: $80,000/year to $100,000/year; The rate may be negotiable based on experience, education, geographic location, and other factors. 2nd Shift CNC Manufacturing Supervisor job responsibilities include: Lead daily operations of the 2nd shift, working collaboratively with the 2nd Shift EDM Manufacturing Supervisor. Direct employees in achieving production goals related to volume, cost, quality, and schedule adherence. Ensure operators are completing control charts accurately and entering production time correctly in the ERP system. Meet or exceed production quality and quantity standards. Lead and facilitate troubleshooting efforts, long-term problem solving, and process improvements. Monitor processes and equipment; report and assist in resolving issues. Maintain responsibility for processes, equipment, personnel, safety, and overall department housekeeping. Prioritize and allocate work effectively across the shift. Develop a thorough knowledge of all manufacturing processes and equipment. Maintain strong communication between management and employees to ensure policies and procedures are well understood. Build high-performing, collaborative teams that enhance job satisfaction and retention. Coach employees through constructive feedback, mentoring, and appropriate disciplinary action when necessary. Participate in annual performance reviews for team members. Model a positive, solutions-oriented leadership style and foster a culture aligned with company values. Perform successfully in changing, fast-paced, or stressful situations. Support New Product Introduction and Product Development projects. Ensure all work aligns with AS9100 and NADCAP quality standards. Desired Qualifications: Associate's degree preferred, but not required. CNC Machining certificate or 7+ years of related machining/manufacturing experience (aerospace experience highly preferred). 7+ years in a leadership role overseeing 15+ direct reports. Proficiency in Microsoft Office applications. Experience with ADP Workforce Now preferred. Requires close vision, color vision, depth perception, and ability to adjust focus. Must maintain corrected or natural 20/20 vision and pass an annual vision test. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis go to **************** Equal Opportunity Employer/Veterans/Disabled This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, and a 401K plan, vacation, sick time, holiday pay, and tuition reimbursement. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

About the Company Hi-Tek is a family-owned and operated business located in Mason, Ohio who has a reputation as both a development and production source for all major gas turbine manufacturers. We offer a clean, climate-controlled environment and quality and safety are paramount. About the Role The Applications Engineer/ CNC Programmer is responsible for providing hands-on support on the manufacturing floor to develop new processes, improve existing protocols, train and mentor machinists, and help find solutions to critical manufacturing issues. The role will be creating programs and or modifying existing programs as needed to establish setup processes for the CNC Mill, Turn, or Grinding departments. CNC Programming and Siemens NX experience is required. THS IS A FULL TIME ONSITE POSITION LOCATED IN MASON, OHIO Responsibilities Applications Engineer/ CNC Programmer Analyzes and translates drawings and specifications of jobs to coordinate set-ups and operations in order to meet manufacturing and production. Determines best-practice processes for various machining operations and designates the proper tooling to ensure quality and cost-effective product delivery. Create tooling paths using CAD/CAM software and properly select the cutting tools that will be needed to generate code for various 3, 4, 5 multi-axis work for milling, turning, and grinding operations. Verify tool path in Vericut Software. Produce setup descriptions and tool lists for machinists. Documents and establishes standards to incorporate engineering changes and improvements. Provide training resources and training instructions of setup procedures and machining processes for machinists. Participate in ongoing conversations with engineers, supervisors, and machinists to resolve any issues related to processes, quality, part completion, and customer satisfaction to aid in continuous improvement to eliminate operating problems, increase productivity, and improve product quality. Participate in the conception and design of complex work-holding/fixtures/gages. Work with tooling vendors to evaluate and obtain the best cutting tool technologies for high-temperature superalloys commonly used in the Gas Turbine Industry. Develop prototypes and test new programs/methods working in a hands-on environment with shop floor personnel to gain feedback on potential improvements. Assists Quality Department in identifying and correcting programming issues that led to non-conformances. Provides time studies, router, and job cost review to ensure standards are up to date and being met. Create and or maintain documentation of all types as required. Follow work instructions, procedures, safety, and company policies as given. Qualifications Applications Engineer/ CNC Programmer 3 + years of Machine Shop experience required - CNC Mill, Lathe, and or Grind. 3+ years as a CNC Programmer. A MUST HAVE Siemens NX experience is required. A MUST HAVE FANUC and Okuma CNC Controls experience preferred. VERICUT software experience preferred. Must be well-versed in various cutting tools for super alloys. Proficiency in the use of CAD/CAM, word processing, and spreadsheet software. Required Skills Applications Engineer/ CNC Programmer Perform under AS9100 standards. Provide leadership to others through example and sharing of knowledge/skills. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra, geometry, and trigonometry. Understand and apply statistical tools. Prioritize tasks. Able to plan, organize, and monitor work of self and others working autonomously and self-direct. Manage multiple projects simultaneously. Ability to read and interpret documents such as blueprints and travelers. Understand and communicate safety rules, operating and maintenance instructions, and procedure manual. Ability to draft routine reports. Ability to speak effectively before customers and/or employees of organization. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. CNC Programming. Siemens NX experience. Preferred Skills Applications Engineer/ CNC Programmer Experience with advanced manufacturing technology. Ability to create solutions and streamline setup procedures. Best-practices for tooling integration while working in a team environment. Pay range and compensation package Applications Engineer/ CNC Programmer $105,000 -$135,000 THS IS A FULL TIME ONSITE POSITION LOCATED IN MASON, OHIO Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are a driving force in the success of our company. Hi-Tek is committed to diversity and inclusivity.

Job Title: CNC Programmer Pay Rate:$38.00-$41.00/hour Shift: 1st Employment Type: Direct/W2 with full benefits #CNCProgramming #AerospaceManufacturing #SiemensNX Position Overview We are seeking an experienced CNC Programmer to support advanced machining operations for aerospace components. This role focuses on programming complex machining centers using Siemens NX CAM, with an emphasis on high-precision aerospace superalloys and other advanced materials. The position involves developing probing routines, macros, and optimized toolpaths to improve efficiency, reduce errors, and support new product introduction (NPI) and production readiness. The ideal candidate is detail-oriented, thrives in a fast-paced environment, and collaborates effectively with engineering, production, and supply chain teams to deliver high-quality, on-time results. Key Responsibilities * Develop, optimize, and implement NX CAM programs for lathes, mills, 5-axis mill-turn, and turn-mill machining centers. * Create advanced probing routines and macros to drive efficiency and ensure error-proof machining. * Interpret engineering drawings, blueprints, and GD&T to generate accurate toolpaths and setups. * Identify and validate tooling and fixturing strategies for complex aerospace components. * Collaborate with engineering, supply chain, and operations to troubleshoot issues, improve cycle times, and mitigate risks during NPI or production transitions. * Manage multiple programming projects simultaneously, documenting changes and providing regular updates to internal leadership and customers. * Maintain CNC programs to reflect design or process updates, ensuring production readiness and compliance with quality standards. Core Qualifications * 5+ years of CNC programming experience in aerospace or precision manufacturing. * Proficiency with CAM software (ideally NX), including multi-axis programming, probing, and macro development. * Strong understanding of machining principles, cutting tools, fixture design, and process optimization. * Hands-on experience with machining aerospace-grade materials including 4140, stainless steel, aluminum, and exotic alloys (e.g., Hastelloy). * Familiarity with CNC equipment such as mills, lathes, wire EDM, 5-axis, and turn-mill centers. * Background in CAD software and GD&T applications. * Strong communication skills with the ability to work cross-functionally in a team-based environment. * U.S. citizen or Permanent Resident (Green Card holder) required due to project requirements. Preferred Qualifications & Skills * Advanced NX CAM programming skills with CAD experience. * Knowledge of probing systems (Renishaw, Siemens). * Familiarity with CNC controls such as Fanuc, Siemens, Heidenhain, Okuma. * Experience supporting new product introduction (NPI) and production launch readiness. * Background in CMM operation and programming. * Experience applying lean manufacturing or continuous improvement practices. Belcan provides a competitive pay and benefits package. Benefits offered MAY include health, dental, vision, and life insurance; 401(k); education assistance; paid time off including PTO, holidays, and paid leave required by law. Salary guidelines for similar roles at Belcan are $38.00-41.00 per hour. Guidelines vary based on many factors including but not limited to education, qualifications, experience, discipline, geographic location, market, and business considerations. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws. Build a challenging and rewarding career with an industry leader!

Shifts Available: 2nd, & 3rd** Pay Rate: $21-29/hr Shift Differential: $1/hr for 2nd and 3rd Shift Additional Pay: Combo Rate Pay Make up to 25% more of base pay for running 2+ Machines simultaneously Benefits: Health, Dental, Vision, and Life Insurance 401(k) + 3% Company Match Paid Vacation/PTO 11 Paid Holidays FSA/HSA ($750 Company Match on HSA) Plus More Job Description: Setup and oversee operation of CNC machinery to produce parts for the aerospace industry Work on CNC Lathes, CNC Gap Lathes, Millturns, CNC Mills (3-5 axis), CNC Bridge Mills, CNC Boring Mills Read and understand setup sheets, blueprints, and shop drawings Load programs into machine; make necessary edits and adjustments according to specifications Select tooling and set into machine Perform quality checks on finished parts using micrometers, calipers, and other measurement devices Run multiple machines simultaneously Follow all company safety standards Other duties as assigned You should be proficient in: GD&T G-Code M-Code Machine Setups for Production Runs Blueprint Reading Machines & technologies you'll use: CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Dmg Mori Seiki) CNC Lathe (2-4 axis) (Mazak, Dmg Mori Seiki) Calipers and Micrometers Measurement Gauges CNC Mill (5+ axis VMC) (Mazak, Dmg Mori Seiki) CNC Lathe (5+ axis) (Mazak, Dmg Mori Seiki)

Requirements Punctuality and Attendance are crucial for success ? Works independently on complex machining tasks ? Use CAD files, engineering drawings, sketches mating parts or sample parts to build a plan for fixturing, order of operations and required tolerancing. ? Designs and fabricates holding fixtures to be used in the machining of raw materials, castings or other components. ? Selects and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, EDM's, and grinders. ? Calculates and sets controls to regulate machining factors such as speed, feed, surface feet per minute, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media for optimized speed and accuracy. ? Independently programs tool paths for optimum outcomes ? Monitors machining process to ensure accurate parts are being produced. Makes adjustments or corrections applying machine controls or machine programming to reduce rework or potential scrap. ? Verify finished component is within the engineering specification based on the drawing or stated tolerances. ? Communicates with team to describe manufacturability issues and offers alternative solutions that meet the original design intent. ? Keep accurate records for work done within work order system. ? Willingness to work some overtime, if needed.

Job Description Need to Know: Temp to Hire M-F, 7 AM - 3:30 PM (no required overtime) $23 - $28/hour Good to know: Company pays 90% of health insurance premium once hired 401K w/generous company match Many more great benefits! Ideal Candidate Qualifications: Proficient in identifying raw materials, selecting appropriate tooling, and utilizing work-holding devices. Skilled in using precision measuring tools, including micrometers, dial calipers, indicators, and edge finders. Capable of interpreting blueprints and procedural instructions to machine parts accurately while ensuring quality control. Experienced with Haas controls, G & M codes, and setting tool lengths and work offsets; familiarity with the “A” axis is a plus. Ability to inspect parts against specifications and make necessary tool offset adjustments. Experience with GibbsCam programming is beneficial. Comfortable working in a fast-paced shop environment, standing for extended periods, and handling physical tasks, including lifting up to 50 lbs. High school diploma or GED required; a technical school certificate or degree is preferred. 5-7 years of machine shop experience is strongly preferred.

The Lead Technician is primarily responsible for laboratory/machine-shop assignments by providing manufacturing support to accomplish the planned activity. Close adherence to project plans and requirements along with a high level of communication with the Project Engineer is necessary. A high level of organization will be applied to maintain project records and compile the data/results for the Project Engineer or others to analyze. The Lead Technician will be under general supervision of an Engineer and responsible for faithfully executing project plans conveyed by Project Engineers or Project Managers. Latitude for independent action exists with effective communication of those actions to those responsible for the project. Essential Functions 1. Complex setups and operate all machines in the machining facility including, but not limited to, manual and CNC machines and all inspection equipment to permit verification of results. 2. Acquire/evaluate data such as tool wear, cutting forces, and part geometries. Support engineers and other technical staff in report writing and presentation creation for the customers. 3. Create solid models for final and intermediate manufacturing process steps in a 3D CAD system. 4. Program CNC machines using CAM software such as MasterCAM or NX. 5. Design and construct mechanical-fixtures/electrical-apparatus to permit the efficient use of the equipment available or as the project requires. 6. Order supplies/components and interact with sales representatives. 7. Perform inspection duties as necessary and create accurate and compliant records of inspections. 8. Maintain the appearance of the manufacturing operation and engage in efforts to restructure the facility to accommodate tours, promotional activity or project related activity. Secondary Functions 1. Maintain active awareness of manufacturing technologies and techniques, especially state of the practice information concerning machining. 2. Assist with technology research in support of project activity as necessary. 3. Visit clients at their locations in support of our proposal development or project execution 4. Mentor Technicians. 5. Track hours and report them to permit management of project budgets. 6. Other job-related duties as assigned. Supervisory Responsibility This position has no supervisory responsibilities. However, mentorship of other Technicians will be expected. Education/Experience: - High school diploma/GED required. Vocational degree/certification or Associate's degree in a related field preferred. - Five years of experience in a machine shop and experience with machinability testing procedures. Required Skills/Competencies: - Ability to swiftly develop familiarity with data acquisition techniques and data acquisition computer programs. - Experience with machinability testing procedures. - Experience with cutting tools, conventional and CNC machines, and familiarity of milling, turning, and grinding. - The ability to read blueprints and manufacture a part from a blueprint to completion. - Experience with CAM software. - Familiarity with Fanuc, Siemens and/or Mazak controllers. - Thorough understanding of GD&T and ability to devise methods to verify compliance of parts with drawing or model requirements. Additional Information All your information will be kept confidential according to EEO guidelines.

Direct Hire with Excellent Benefits!! 2nd Shift 3-11pm CNC Machinist Performs all phases of machining, finishing, and assembly in a job shop or high volume applications. Processes components to meet print and or geometric tolerance requirements. Responsible for the setup, operation and maintenance of production machinery, maintenance of proper documentation, and support of the manufacturing engineering function. Detailed Description · Performs programming. · Performs set up of manual and CNC machines including loading of tools, troubleshooting, programming adjustments and tear-down. · With limited supervision, completes tasks as directed by SOPs, routers, prints, work instructions, and manufacturing schedules. · Operates machining equipment with an understanding of machining and metal removal concepts which may include milling, turning, grinding, and other methods. · Observes operation of machine and verifies conformance of machined work pieces to specifications using measuring instruments such as fixed gauges, calipers, and micrometers. · Adheres to dimensions and tolerances found on prints. May use prints and sketches to determine proper methods and processes. ·CNC machinist performs machine set up. · Demonstrates a high degree of proficiency in the selection and care of special machine tools such as drills, jigs, mills, lathes, and fixtures. · Diagnoses machine problems using proper diagnostic tools. · Maintains CNC program files. · Maintains machine maintenance files. · Reworks productions parts and performs emergency rework and/or modification of production parts as directed. · Modifies existing processes if necessary. · Inspects prototypes, machines prototype fixtures and First Article components. · Performs in-process checks using measuring devices and reports defective materials or questionable conditions to the department lead person or supervisor · Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. · Trains other employees. · Works on projects as part of a team, exchanging ideas and contributing skills that complement those of the other team members. Fulfills commitments to team members. · Performs assembly, deburring, and other duties as required Job Requirements - CNC Machinist · High School diploma or equivalent. · 5+ years of related experience with trade school certification preferred where applicable. · Considerable knowledge of the machinist role and complete acquaintance with and understanding of the machining of routine parts and ability to practically apply solutions to routine problems. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description An international leader in aviation Heroux-Devtek, the world's 3rd largest producer of landing gear, serves the civil and military aerospace markets from production facilities in North America, Europe and United Kingdom. The Company's longevity, flexibility, and track record for the development and implementation of innovative production systems have distinguished it as a leader in the domain. With its most recent acquisitions, Heroux-Devtek is bolstering its status as one of the foremost landing gear, actuation and hydraulic system designers and manufacturers in the global aerospace industry. Information on the division: Located in Springfield, the 70+ employee facility (100,000+ sq. ft.) is one of Héroux-Devtek's centers of excellence for the manufacturing of medium to large complex landing gear and titanium components. As part of the Central Division you will lead P&L responsible for critical machining operations of major commercial aircraft programs such as the Boeing 777 and Embraer E-2, and important military programs as F-18, F-35, C-17 and C-130. With a strong focus on latest technology of the manufacturing processes with machining automation and techniques we aim to remain the best value producer of complex landing gear components. What we offer? Leaders who invest in your success, development, and growth A culture of true teamwork and pride in our product Competitive salaries linked to performance and paid time off 11 paid holidays A comprehensive group insurance plan including a HAS/FSA options, Dental & Vision Supportive wellness program, including healthcare discounts Automatic Life Insurance with supplemental options Short and Long Term Disability Insurance Opportunities for retirement savings with 401k plans including a company match Tuition reimbursement for relevant Certifications, Education, & Trainings Free access to a virtual doctor and the employee assistance program Social activities for all employees (BBQ, Golf, Christmas parties, etc.) Generous referral bonuses and advantageous recognition programs A motivating work environment and a human management style where you can make a difference Summary: The Machinist will be responsible for the set up and machining precision parts to specifications with minimal assistance. Main responsibilities Machine Control which includes pull and send programs; tool change; trouble shooting; entering tool and D-Comp offsets; M.D.I. Understanding setup sheets, tool lists and Operational Detail Sheets Calculating Work Offsets/Indicating Understanding program/D-Comps Tightening and clamping pressures (i.e. ‘Free State' condition and part clamped maintaining free state) Cutting pressures/Boring Bar adjustments; spring pass; test cut bore Tape proving new and modified programs, anticipating what the machine will do after it cuts Preventive maintenance 6-S Activities Pre-start up inspections which incorporate Health & Safety awareness Running a combined number of machines simultaneously in a safe and effective manner. (Combo) Other duties as assigned Adhering at all times to company policies, procedures and health and safety requirements Applications: CNC Lathes, CNC Gap Lathes, Millturns, CNC Mills (3, 4 & 5 axis),CNC Bridge Mills and CNC Boring Mills Fanuc (Mitsui Seiki, Toyoda, Megas, Mori Seiki), Mazatrol(Mazak), Okuma and Tosnuc(Toshiba) controls Forefront of the technology using FMS (Flexible Manufacturing System) for our most critical programs and dynamic probing Our ideal candidate: Ability to produce a high quality part in a safe, productive and efficient manner Ability to interact with co-workers productive and positive manner Work culture and environment Are you known as an innovation driver? Are you looking for your next challenge and opportunity to learn & excel in Aerospace? Héroux-Devtek offers you the opportunity to work in a diverse and team-oriented environment where skills development is a top priority. Here, employees are at the heart of the realization of the product, developed through engineering centers, factories, a service unit, and an accessible and agile head office for fast decision-making. Be part of a motivating top-notch team taking Aerospace to new heights! Candidates must meet security screening requirements as set out by ITAR directives. HDI Landing Gear is an equal employment opportunity (EEO) employer to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, HDI Landing Gear will provide reasonable accommodations for qualified individuals with disabilities.

Job Description IronRoad is conducting a confidential search for a 2nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

Resonant Sciences LLC has an opening for a hands-on CNC Machinist - 2nd Shift to join our Dayton, Ohio team. The position provides an opportunity to join a fast-paced elite team whose primary mission is to support our Nation's War Fighters. The candidate for this position shall be a self-starter who can work independently, unsupervised, and with little guidance. The candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies. DUTIES AND RESPONSIBILITIES: We are seeking a hands-on CNC Machinist who can independently set up and run CNC jobs using setup sheets and machining instructions. The selected CNC Machinist will have responsibility for and should have expertise in the following areas: Operate 3-axis, 4-axis, and 5-axis CNC machines during off-shift or hybrid hours. Prove out NC programs and make necessary adjustments to speeds, feeds, and tool paths. Plan and execute machining tasks to meet schedule and quality requirements. Perform in-process inspections to verify dimensional compliance. Perform routine machine maintenance and basic troubleshooting. Communicate status, issues, and improvements clearly across shifts. Assist with work instruction development when required. Position is primarily 2 nd shift, with potential for a hybrid schedule depending on workload and business needs. Perform other shop duties as assigned. QUALIFICATIONS: High school diploma or equivalent required; vocational training strongly preferred. Minimum of five (5) years of CNC machining experience. Demonstrated ability to work independently with minimal supervision. Experience with 3-axis and 5-axis CNC machine setup and operation. Working knowledge of G-code interpretation and modification. Proficient with precision inspection tools and methods. Strong understanding of engineering drawings, tolerances, and GD&T fundamentals. Organized, dependable, and adaptable to shifting priorities. Strong problem-solving and communication skills, especially across shifts. Must be comfortable supporting off-shift operations and communicating effectively with day-shift personnel. CITIZENSHIP/SECURITY CLEARANCE: U.S. Citizenship required. Must be eligible to obtain and/or maintain a Secret security clearance. Active clearance preferred. WHAT'S IN IT FOR YOU? Become part of a high-tech work environment that is highly impactful, exciting, and collaborative. Flexible working environment that enables our employees to balance work and personal life. A comprehensive benefits package that includes medical, dental, vision and prescription benefits with extremely low employee cost share for you and your eligible dependents. A well-funded Health Spending Account with standard account fees paid by Resonant Sciences. 10 Federal Holidays (6 Standard, 4 Floating). A flexible Paid Time Off plan for employees. A generous retirement plan, subject to plan, IRS and ERISA rules. WHO ARE WE? Resonant Sciences is a research and development firm with locations all over the United States, focused on developing and transitioning innovative technologies and solutions to developmental and operational platforms. Our areas of expertise include radome and antenna design and fabrication, custom electronic solutions, and RF measurements of materials, antennas, radomes, and subsystems. Our extensive capabilities include design and analysis, production, and ground and flight testing. A career at Resonant Sciences means that you will be involved in the complete development life cycle, seeing your design evolve from development prototype to incorporating mission requirements to technical specifications into a finished product for field testing. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status

Job Description CNC Operator / Machinist Company: Pacific Piston Ring Co., Inc. Pacific Piston Ring Co., Inc., established in 1921, focuses on custom-made components for aerospace and industrial manufacturers. For over 100 years, the company has continuously adapted to customer needs, illustrating consistent and cost-effective manufacturing with the highest levels of product quality and reliability. We are a part of Loar Group and work in the same location as Maverick Molding Company, another Loar Group company. Job Summary We are seeking CNC Operators / Machinists to join our team in Blue Ash, Ohio. This is a full-time position for both the first and second Shifts. The role involves operating CNC mills, lathes, and/or grinders to manufacture parts that meet customer specifications and production standards. Duties and Responsibilities Set up machines using general shop tools (e.g., wrenches, screwdrivers) and precision measuring tools (e.g., micrometers, indicators) following detailed setup procedures. Operate machines to manufacture parts using fixtures, shuttles, clamps, and associated tooling to locate parts for machining. Complete required documentation (e.g., travelers, deviation tickets) with inspection information for parts run as required. Perform in-process and first-piece inspections using standard precision measuring equipment to ensure parts meet specifications outlined on operation sheets or blueprints. Maintain an accurate daily log of parts processed, significant dimensions, machining parameters, and general information pertaining to the operation performed. De-burr parts using hand tools, air grinders, and manual machine operation. Perform preventive and routine maintenance to maintain machine performance. Perform daily housekeeping tasks to provide a safe, clean, and orderly workplace. Perform related duties as assigned by management. Education and Experience Requirements High school diploma, GED, or vocational school graduate with coursework in mechanical drawing, shop mathematics, and machining practices. One to two years of prior machining experience. Experience with precision measuring equipment and reading plots and/or blueprints. Attention to detail is required to prevent damage to parts and machine tools. Ability to obtain a forklift operator's license and operate a forklift safely when applicable. Physical Requirements Regularly required to stand, walk, and reach with hands and arms. Frequently required to stoop, climb, reach at or above shoulder level, and push or pull wheeled items weighing up to 100 pounds. Occasionally required to squat, kneel, and lift up to 60 pounds independently or up to 100 pounds with assistance. Repetitive actions include simple grasping, firm grasping, and fine manipulation. Vision requirements include close vision, peripheral vision, depth perception, and ability to focus. Benefits 401(k) retirement plan with company match Comprehensive medical, dental, and vision coverage Company-paid short-term, long-term, and life insurance 10 paid holidays, plus vacation and sick time Safety shoe and eyewear allowance Please submit your cover letter and resume to our Job Portal for both Maverick Molding Company and Pacific Piston Ring. ********************************************* #hc204124

FC Precision, a subsidiary of FC Industries, is seeking a skilled Vertical Turning Lathe (VTL) Machinist to join our growing team! FCP is a leading provider of high-quality industrial tools and equipment, specializing in aerospace and Department of Defense. With a strong commitment to innovation, reliability, collaboration, and customer satisfaction, we've built a reputation as a trusted partner for some of the most advanced companies in the world - including NASA, SpaceX, GE, and many more. At FC Precision, your work contributes to cutting-edge projects that push the boundaries of technology - from space exploration and government missions to aerospace engine components and beyond. But it's not just about what we make - it's about who we are. We take pride in our positive, team-oriented culture, where every employee is valued and supported. We believe in investing in our people, providing opportunities for growth, development, and long-term success. When you join FCP, you're not just taking a job - you're growing your career with a company that truly cares about your goals and your future. Here are some of the reasons it's great to be a CNC Machinist at FC Industries! · Competitive Pay · Family/ team culture that values communication and growth · Flex start time to accommodate your family · Great Medical/ Dental/ Vision · Heating and Air Conditioning in the whole building, including the shop! · 401k Retirement Plan with strong company match · Immediate PTO and Holiday Pay · Company discounts through Verizon, Chrysler, GM and Working Advantage · On-site wellness coaching and YMCA discounts · On-site cafe/ convenience store · Fun perks such as gift cards, 50/50 drawings, Queen of Hearts, picnics, holiday parties, employee appreciation days... and more! Essential Functions as a VTL Machinist: · Setting production machinery for acceptable production processes and obtaining run approval. · Analyzes machine, tool and equipment problems and makes basic repairs, as well as handling process maintenance. · Continuous improvement of operating methods and procedures designed to eliminate operating problems, increase productivity, and improve product quality. · Inspect work pieces for conformance to specifications visually or using gages or templates and adjust the machine to correct errors or to reduce process variation. · Perform repetitive and custom work where fixtures, machine stops, indexing devices, and machining tools are utilized to control critical tolerances and dimensions. · Validate set-up and quality as needed to meet critical tolerance limits and customer specifications. · Maintaining and establishing records and documentation of all types as required. · Ensure all safety guards and personal protective equipment are always in place. · Follow Work Instructions, procedures, and company policies. · Other duties as required. Requirements Qualifications for a Vertical Turning Lathe Machinist: · Thorough knowledge of specific department equipment and their processes. · Able to read, write, and comprehend written and oral instructions · Able to monitor machine sounds to identify and diagnose changes to take appropriate action. · Minimum 3-5 years CNC Vertical Turning Lathe experience Physical Requirements for a Vertical Turning Lathe Machinist: · Ability to walk, push, reach overhead and bend to the floor. · Ability to exert up to 10 pounds of force regularly. · Ability to perform repetitive movements over an extended period. · Ability to repeatedly lift objects weighing up to 10 pounds; objects up to 25 pounds occasionally. Salary Description $28 - $34 per Hour

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. Performs all phases of machining, finishing and assembly in a job shop or high-volume applications. Processes components to meet print and or geometric tolerance requirements. Responsible for the setup, operation and maintenance of production machinery, maintenance of proper documentation and support of the manufacturing engineering function. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Primary responsibilities are to: Performs programming. Performs set up of manual and CNC machines including loading of tools, troubleshooting, programming adjustments and tear-down. With limited supervision, completes tasks as directed by SOPs, routers, prints, work instructions and manufacturing schedules. Operates machining equipment with an understanding of machining and metal removal concepts which may include milling, turning, grinding and other methods. Observes operation of machine and verifies conformance of machined work pieces to specifications using measuring instruments such as fixed gauges, calipers and micrometers. Adheres to dimensions and tolerances found on prints. May use prints and sketches to determine proper methods and processes. Performs machine set up. Demonstrates a high degree of proficiency in the selection and care of special machine tools such as drills, jigs, mills, lathes and fixtures. Diagnoses machine problems using proper diagnostic tools. Maintains CNC program files. Maintains machine maintenance files. Reworks productions part and perform emergency rework and/or modification of production parts as directed. Modifies existing processes if necessary. Inspects prototypes, machines prototype fixtures and First Article components. Performs in-process checks using measuring devices and reports defective materials or questionable conditions to the department lead person or supervisor. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Trains other employees. Works on projects as part of a team, exchanging ideas and contributing skills that complement those of the other team members. Fulfills commitments to team members. Performs assembly, deburring and other duties as required. Note: Other duties may be assigned as necessary. QUALIFICATIONS The requirements listed below are representative of the knowledge, skill and/or ability required for this position. High School diploma or equivalent. 5+ years of related experience with trade school certification preferred where applicable. Considerable knowledge of the machinist role and complete acquaintance with an understanding of the machining of routine parts and ability to practically apply solutions to routine problems. Understanding of FDA device manufacturing requirements. Salary Pay Range: $25.96 - $35.58 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

←Back to all jobs at ETI GLOBAL Manual Machinist ETI GLOBAL is an EEO Employer - M/F/Disability/Protected Veteran Status ETI, Inc. is an independent heavy equipment/parts dealer, that is looking for a Manual Machinist This position gives the chosen individual a great opportunity to learn and expand with a growing company. ETI offers competitive pay and benefits package. We are looking for an experienced manual machinist for a hydraulic repair facility. We work mainly on repairing hydraulic cylinders for Construction heavy equipment but are not limited to it solely. Must be a motivated individual to help grow our team and business further, with an emphasis on quality, speed, and proficiency. Responsibilities: · Operate, maintain, and clean machines · Duplicate or reproduce damaged parts · Cut-off or remove parts of damaged cylinders to be reused · Modify or improve existing parts · Maintain a clean and safe workstation Experience/Qualifications/Skills: · Must have previous experience running full manual lathe and mill · Good problem solving skills · Must be Reliable, Prompt, and have sense of urgency. · Good mechanical Skills, ability to use hand and power tools · Must be able to move large & heavy components. · Previous Hydraulic repair experience a plus · Welding experience preferred- TIG, MIG, and FCAW Must have a Valid Drivers License M-F 8-5:30 Business hours with frequent opportunities for overtime Occasional Saturdays when workload requires Health, Dental, Vision, PTO, Holiday, and 401K all available. Please provide a resume with references and applicable experience. Pay DOE ' Work Location: One location Work Remotely No Job Type: Full-time Salary: $25.00 per hour Benefits: 401(k) Dental insurance Flexible schedule Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Please visit our careers page to see more job opportunities.

Enginetics ETG's success is a direct result of our most important asset - our people. Working collaboratively, our team members enjoy a casual, fast-paced, flexible, and rewarding work environment that is: Customer Focused - we understand that our customers are the reason why we're in business. Built on Teamwork - we believe teamwork divides the task and doubles the success. Results Driven - we believe that what gets measured improves. Job Description Enginetics ETG is searching for a hard-working, motivated and dedicated Manual Machinist who is proficient in the programming, setup and operation of vertical milling machines. This is an immediate opening for a multi-talented, top notch Manual Machinist with excellent communication skills to work in our Huber Heights, Ohio facility. This position is on 2nd shift. Shift hours are as follows; 2nd shift Monday-Friday 2:40pm to 11:10pm Qualifications Candidates should have demonstrated experience in the following areas; Set up and fabricate complex precision parts to specifications using manual machine tools such as Bridgeport, Lathe, Surface grinders, drill press, boring bars, etc Ability to set-up and run their own job. Monitor the machining process, measure parts during fabrication operations and adjust settings and operations to ensure product conformance to all applicable specifications. Proficient with the use of measurement instruments: micrometers, dial indicators, calipers etc. Experience and ability to understand and interpret specifications, diagrams and plans Highly motivated, detail oriented, self-sufficient with a “make it happen” attitude & approach. Understanding of G-Code programming a plus. Experience in part inspection, First Piece inspection. Experience with Anilam, Prototrak or similar controls Ability to perform programming using Conversational Prototrak Controls Job shop environment a plus. Additional Information All applicants must successfully complete and pass a background check and drug screening. We offer excellent benefits; Medical, Dental Vision, HSA/FSA, Stock purchase thru weekly employee contribution at a 5% discount, Fidelity 401K, Tuition Reimbursement, and 10 Company paid Holidays. Enginetics ETG is a Drug Free and Tobacco\Smoke Free Campus We look forward to having you join our team as we prepare to “Challenge the Future Together”. Equal Opportunity Employer

IronRoad is conducting a confidential search for a 2 nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

Resonant Sciences LLC has an opening for a hands-on CNC Machinist to join our Dayton, Ohio team. The position provides an opportunity to join a fast-paced elite team whose primary mission is to support our Nation's War Fighters. The candidate for this position shall be a self-starter who can work independently, unsupervised, and with little guidance. The candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies. DUTIES AND RESPONSIBILITIES: We are seeking a hands-on CNC Machinist who can independently set up and run CNC jobs using setup sheets and machining instructions. The selected CNC Machinist will have responsibility for and should have expertise in the following areas: Operate 3-axis, 4-axis, and 5-axis CNC machines during off-shift or hybrid hours. Prove out NC programs and make necessary adjustments to speeds, feeds, and tool paths. Plan and execute machining tasks to meet schedule and quality requirements. Perform in-process inspections to verify dimensional compliance. Perform routine machine maintenance and basic troubleshooting. Communicate status, issues, and improvements clearly across shifts. Assist with work instruction development when required. Perform other shop duties as assigned. QUALIFICATIONS: High school diploma or equivalent required; vocational training strongly preferred. Minimum of five (5) years of CNC machining experience. Demonstrated ability to work independently with minimal supervision. Experience with 3-axis and 5-axis CNC machine setup and operation. Working knowledge of G-code interpretation and modification. Proficient with precision inspection tools and methods. Strong understanding of engineering drawings, tolerances, and GD&T fundamentals. Organized, dependable, and adaptable to shifting priorities. Strong problem-solving and communication skills, especially across shifts. CITIZENSHIP/SECURITY CLEARANCE: U.S. Citizenship required. Must be eligible to obtain and/or maintain a Secret security clearance. Active clearance preferred. WHAT'S IN IT FOR YOU? Become part of a high-tech work environment that is highly impactful, exciting, and collaborative. Flexible working environment that enables our employees to balance work and personal life. A comprehensive benefits package that includes medical, dental, vision and prescription benefits with extremely low employee cost share for you and your eligible dependents. A well-funded Health Spending Account with standard account fees paid by Resonant Sciences. 10 Federal Holidays (6 Standard, 4 Floating). A flexible Paid Time Off plan for employees. A generous retirement plan, subject to plan, IRS and ERISA rules. WHO ARE WE? Resonant Sciences is a research and development firm with locations all over the United States, focused on developing and transitioning innovative technologies and solutions to developmental and operational platforms. Our areas of expertise include radome and antenna design and fabrication, custom electronic solutions, and RF measurements of materials, antennas, radomes, and subsystems. Our extensive capabilities include design and analysis, production, and ground and flight testing. A career at Resonant Sciences means that you will be involved in the complete development life cycle, seeing your design evolve from development prototype to incorporating mission requirements to technical specifications into a finished product for field testing. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status

Hi-Tek Manufacturing is searching for experienced 2nd shift CNC Grind Operators who wish to advance his or her career in advanced manufacturing technology by executing a higher level of workmanship. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek offers a clean, climate-controlled environment and we believe in quality and safety above all else. 2nd shift 3:30pm-12:00am Mon-Fri *OT may be required as needed. $20- $28 Per Hr Plus a 15% Shift Differential for 2nd Shift Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. Essential Duties and Tasks: CBN (cubic boron nitrate) plated wheel grinding radial. Follow all Hi-Tek policies and procedures, including the use of proper PPE. Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications. Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary. Maintain working knowledge of CNC principles, including G and M codes. Maintain working knowledge of rotary/linear axes. Selects, aligns, and secures fixtures, grinding wheels, and workpieces on machines as necessary to machine parts as required. Analyze, interpret CMM reports, and properly offset machine dimensions to meet customer specifications. Perform Deburr operations to within specified tolerances. Operate overhead crane when necessary. Report proper labor hours in the ERP system. Maintains a safe and clean work environment by performing daily housekeeping duties. Capable of running multiple machines, when assigned. Demonstrates the ability to lift 25 pounds occasionally. Any other duties as assigned to help drive our vision, fulfill our mission, and abide by our organization's values. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment. Always take ownership and be accountable for your actions. Good and reliable attendance and a positive attitude are a must. Physical Conditions: Lift, push and/or pull 35 pounds. Stand at least 95% of the scheduled shift. Routinely perform reaching, twisting, bending, and grasping in order to move and set tools, equipment and material. Perform under AS9100 standards. Qualifications, Education and Experience: High school diploma or GED required. Duty related experience or/or including milling or lathe experience required - Min 1 yr. Ability to perform basic math functions. Troubleshooting/problem-solving skills Must be a United States Citizen, or a US Permanent Resident This job description is a tool to be followed. Other job duties may be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. 2nd shift 3:30pm-12:00am Mon-Fri *OT may be required as needed.