Computer Numerical Controller Machinist Jobs in Haddon, NJ

Container Research Corporation, an AS9100 certified company with over 60 years in business, seeks a 2nd shift CNC Machinist/Programmer. The CNC machinist/programmer will input G & M codes and program, set up, and operate Fadal and HAAS CNC Machining Centers, and set up and run conventional lathes, milling centers, and other machine shop equipment. The right candidate will have 3 or more years of experience programming and operating CNC machinery. Knowledge of program sequence is required. The candidate will need working knowledge of knee mills, conventional lathes, drills, and all other related machinery, and be able to read a rule, square, protractor, micrometer, tape measure, and other measuring devices. Four day workweek (Mon-Thurs) and weekly pay! Full benefits package after 60 days of employment and paid time off after 6 months. Are you the right fit? Apply now! Job Type: Full-time, 4x10s Monday through Thursday, 4 PM to 2:30 AM Pay: $23.36 - $37.80 per hour | Rates in the $30s are only available to those with extensive experience writing and editing code at the console | Rate is dependent on skills and experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Aston, Pennsylvania Work Type: Full Time Container Research Corporation, an AS9100 certified company with over 60 years in business, seeks a 2nd shift CNC Machinist/Programmer. The CNC machinist/programmer will input G & M codes and program, set up, and operate Fadal and HAAS CNC Machining Centers, and set up and run conventional lathes, milling centers, and other machine shop equipment. The right candidate will have 3 or more years of experience programming and operating CNC machinery. Knowledge of program sequence is required. The candidate will need working knowledge of knee mills, conventional lathes, drills, and all other related machinery, and be able to read a rule, square, protractor, micrometer, tape measure, and other measuring devices. Job Type: Full-time, 4x10s Monday through Thursday, 4 PM to 2:30 AM Pay: $23.36 - $37.80 per hour | Rates in the $30s are only available to those with extensive experience writing and editing code at the console | Rate is dependent on skills and experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Share If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. **CNC Machinist (Second Shift)** Full Time Manual Labor 30+ days ago Requisition ID: 1030 **CNC/ Mill Machinist - Second Shift (beginning 3PM)** **Privately held Manufacturing Company.** **Mt. Laurel, NJ (On-Site)** Bright Lights USA Inc. dba BLUSA Defense Manufacturing () is a small business manufacturer of mechanical and electro-mechanical components for the defense industry based in Mt. Laurel, NJ. We are an approved manufacturer for the US Government. We are ITAR registered/EAR & DFARS compliant. Our quality management system is certified to AS 9100:2016 and ISO 9001:2015. Our facility has a complete machine shop with CNC Milling, CNC Turning, Wire EDM and 3D printing. We offer a full range of manufacturing options-- from small to large quantities, and from the simple to complex--all at reasonable prices. We can even perform reverse engineering for hard-to-find items. **Job Summary:** Set up and run CNC Machining Centers. **Essential Duties:** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily: * Safely and competently setup and operate CNC mills with minimal supervision and technical guidance. * Perform part inspections as necessary to ensure quality of work and continually monitor parts production to ensure adherence to blueprint tolerances using appropriate inspection tools and criteria. * Deburr parts after machining operation to meet required specifications. * Maintain equipment and work areas in a clean, safe, and orderly fashion and perform basic preventative maintenance activities as required. * Maintain correct daily labor time recording and AS9100-related quality documents. * Perform other general shop duties or assist other departments as business demands require. **Education /Experience**: * High school diploma, G.E.D. or equivalent is preferred. * 3-5+ years' CNC Milling experience. * Possess a working knowledge of typical shop inspection equipment such as micrometers, Vernier calipers, dial indicators, bore gages, CMM's, and be proficient with all inspection methodologies. * Good working knowledge and understanding of geometric dimensioning and tolerancing (GD&T), metal cutting principles, tooling, and thread nomenclature is required. **Physical Requirements**: **I**ncludes regular exposure to manufacturing areas that require the use of personal protective equipment such as safety glasses, hearing protection, and respirators. * Must be capable of standing for extended periods of time. * Must be able to lift up to 50 lbs. on occasion. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Job Description CNC/ Mill Machinist - Day Shift Privately held Manufacturing Company. Mt. Laurel, NJ (On-Site) Bright Lights USA Inc. dba BLUSA Defense Manufacturing (blusadefense.com) is a small business manufacturer of mechanical and electro-mechanical components for the defense industry based in Mt. Laurel, NJ. We are an approved manufacturer for the US Government. We are ITAR registered/EAR & DFARS compliant. Our quality management system is certified to AS 9100:2016 and ISO 9001:2015. Our facility has a complete machine shop with CNC Milling, CNC Turning, Wire EDM and 3D printing. We offer a full range of manufacturing options-- from small to large quantities, and from the simple to complex--all at reasonable prices. We can even perform reverse engineering for hard-to-find items. Job Summary: Set up and run CNC Machining Centers. Essential Duties: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily: Safely and competently setup and operate CNC mills with minimal supervision and technical guidance. Perform part inspections as necessary to ensure quality of work and continually monitor parts production to ensure adherence to blueprint tolerances using appropriate inspection tools and criteria. Deburr parts after machining operation to meet required specifications. Maintain equipment and work areas in a clean, safe, and orderly fashion and perform basic preventative maintenance activities as required. Maintain correct daily labor time recording and AS9100-related quality documents. Perform other general shop duties or assist other departments as business demands require. Education /Experience: High school diploma, G.E.D. or equivalent is preferred. 3-5+ years’ CNC Milling experience. Possess a working knowledge of typical shop inspection equipment such as micrometers, Vernier calipers, dial indicators, bore gages, CMM’s, and be proficient with all inspection methodologies. Good working knowledge and understanding of geometric dimensioning and tolerancing (GD&T), metal cutting principles, tooling, and thread nomenclature is required. Physical Requirements: Includes regular exposure to manufacturing areas that require the use of personal protective equipment such as safety glasses, hearing protection, and respirators. Must be capable of standing for extended periods of time. Must be able to lift up to 50 lbs. on occasion. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

CNC Machinist Level III Build innovative solutions and design the future. You can pursue your potential at Tecomet by working with a dedicated team to solve complex challenges, in partnership with industry-leading clients in medical device technology, aerospace, and defense industries. With the backing of our steadfast brand, you can be a part of the next era of manufacturing by bringing bold ideas to life and building products that improve on the status quo. What's In It For You: At Tecomet, we believe that everyone makes a difference and contributes to our overall success. We are a team bound together by pride in our work and dedication to our craft. Our leadership team shares the company's strategic direction so our workforce can remain informed and attain our internal goals and objectives. Let's talk about what we have to offer: Competitive pay and benefit packages Health Benefits start on day one 401k available with company match 9 Paid Holidays with 2 Floating Holidays PTO offered POSITION SUMMARY: Produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. PRINCIPAL RESPONSIBILITIES: Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new setup Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained Read and evaluate blueprints or specifications Troubleshoot and understand CNC programs and processes Improve and produce work Instructions Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings Propose adjusted speeds and feeds for different machining requirements Perform routine maintenance as per daily machine checklist and adhere to PM schedule Perform hand finishing Follow Good Manufacturing and Good Document Practices (GMP/GDP) at all times including completion of job routers/ cards Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues Achieve set productivity targets and identify ways of improving productivity Record all activities in a timely manner on the job tracking system Identify and support Continuous Improvement activities Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required Maintain 5S/housekeeping standards within work area Performs other duties or special projects as required or as assigned by supervisor EDUCATION AND EXPERIENCE REQUIRED High School diploma or general education degree (GED) 5+ years CNC Machining experience Associates degree/certificate in Tooling & Machining or Machinist apprenticeship preferred GCSE/NVQ Maths and English is desirable (UK only) KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED Ability to operate, set up, and maintain a CNC Machine Ability to run multiple CNC Machines Ability to set up, adjust offsets and operate and run development and production jobs Ability to program with some level of supervision Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales Able to read and follow technical drawings and diagrammed instructions Proven record of quality, on-time production runs Demonstrable commitment to safety always Attention to detail alongside ability to perform repeatable task over a prolonged period Positive attitude, reliable, and a team player Problem solving ability Good communication skills, written and verbal Solid computer skills Ability to train new or lower-level machinist PHYSICAL DEMANDS/WORK ENVIRONMENT While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Tecomet, Inc is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, gender identity, religion, sexual orientation, national origin, disability, genetic information, pregnancy, protected veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Night Shift Supervisor & CNC Set-Up Machinist ' We got this .' What is the first thing that crosses your mind? Is it supporting a teammate? Is it completing your job for the day? Here at Reliable Equipment Manufacturing Co., we mean it when we say, ' We got this .' What exactly is the ' got ' in this sentence? Our customers - ensuring we provide the safest and best product in the Utility Line Industry to help keep the power on in homes and businesses - especially during times of turmoil. Our employees - we offer a full benefits package which includes, Medical, Dental, Vision, Prescription, 401k with company match, EAP, Vacation, Personal, Sick, STD as well as company paid Life Insurance and Long-Term Disability. We also pay for uniforms and work boots if needed. Bagels are provided bi-weekly for all employees as a thank you for their hard work. One another - once an employee at Reliable, you are truly a part of the team. We strive every day to become the definition of a team environment. We support one another through open conversations and sharing innovative ideas to make processes more efficient. Everyone has a voice and the opportunity to grow. We at Reliable Equipment Manufacturing Co. are currently looking for a full-time Night Shift Supervisor & CNC Set-Up Machinist. Duties: Supervisor and Lead night shift Perform setups as well as edit and update programs for jobs when necessary. Build tooling for jobs. Understand proper use of inspection equipment and validate conforming parts. Train new employees. Horizontal Machining experience is a plus. Support department by providing guidance on proper tools and procedures to help them be successful. Other duties as assigned. Qualifications: HS Diploma or equivalent. 3+ years experience in machining. Prior supervisory experience We offer a competitive salary and an excellent benefits package, including medical, dental, vision and prescription. Company paid life insurance and LTD, STD, 401(k) plan with company match, FSA, and HSA accounts. Vacation, Sick Personal days and many other perks. Hours 3 - 11:30pm If offered the position, candidate must successfully pass a background check which includes criminal, DMV, and drug testing. You may also apply by submitting your resume with salary requirements to ***************************** Reliable Equipment is committed to the principle of equal employment opportunities for all people and embraces diversity. Furthermore, Reliable Equipment does not discriminate as Reliable Equipment is an equal opportunity employer. Reliable Equipment does not discriminate against any person on the basis of race, color, religion, national origin, age, sex (including pregnancy, childbirth and related medical conditions), disability, genetics, citizenship status, military service, or any other status protected by law, in matters pertaining to employment opportunities.

Aerotek - JobID: JP-004869640 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines; Inspect, trim, test, fixture, assemble, and package products; Perform other duties as assigned. . . Hiring Immediately >>

* Full-time * FLSA Status: Non-Exempt ** Brooks Instrument, a global manufacturer of flow and pressure measurement and control products for critical applications, and a division of ITW (A Fortune 200 Company) is seeking candidates for a **Senior CNC Machinist (2nd shift).** This position will be based out of our headquarters facility in Hatfield, PA (Suburban Philadelphia). In addition to our Pennsylvania operations, Brooks maintains manufacturing locations in, Hungary, and Korea. The Company also maintains sales offices throughout the world. Our products are used in laboratory and process applications in end markets such as: life sciences, chemicals, semiconductor, analytical instruments, nuclear, and solar cells. **Job Description** **Basic Function** With minimal supervision, performs a wide variety of duties to support the Engineering Model Shop. This role requires a seasoned professional with extensive experience in both manual and CNC machining. The ideal candidate will have a deep understanding of machining processes, excellent problem-solving skills, and the ability to program CNC machines efficiently. This candidate should also have applicable knowledge of machine shop theory and procedures, shop mathematics, layout techniques and familiarity with machining various materials. **Essential Duties and Responsibilities** * Perform machining of engineering prototypes to support development programs. * Assignments may be broad in nature, requiring originality and ingenuity. * May be assisted by engineering personnel in developing unique parts/fixtures. * Make recommendations for design enhancements or improvements to support design for manufacturability optimization. * Operate with latitude for un-reviewed action or decisions. * Reviews progress with management. * Ability to make parts from analyzing drawings, sketches, specifications or sample parts to determine dimensions and tolerances of finished work-pieces. * Selects, aligns, secures holding fixtures, cutting tools, accessories, and materials on machines such as mills, lathes, grinders, etc. * Utilize EZ Trak on the Bridgeport milling machine. * Utilize Haas CNC Lathe and Mill; writing G-code and using IPS. * Verifies conformance of finished work-piece to specifications, using precise measuring equipment. (comparator, calipers, micrometers) * Support manufacturing, as required, for fixtures, tooling or small quantity parts. * Responsible for machine shop tooling maintenance on a regular basis. * Responsible for managing priorities and work schedule to support project timelines. * Responsible for ordering and managing raw material to support model shop requirements. * Knowledge of materials - general characteristics, machine-ability, heat-treating procedures. * Maintain a clean and orderly workplace. * Other duties not listed above to support departmental or corporate goals. * Regular attendance * Ability to get along with others in a large multidisciplinary team environment **Qualifications** **Education and Experience** * High school diploma required * Minimum of 8 years machining experience and/or educated through an apprenticeship program, trade school, or vocational program. * Ability to work in MS Outlook, Excel, Word and Team Center **Additional Information** Our employees enjoy competitive, merit-based salary plus excellent benefits including: * Health and dental insurance * Company Paid Life Insurance / Short and Long Term Disability * 401K plan with generous company match * Vacation, personal days and holidays * Continuing education reimbursement program * Flexible spending accounts The opportunity to join a well-established (70 + years in business) yet dynamically changing organization that works together as a team to meet the challenges of satisfying customers' needs and managing rapid growth to better compete in a global marketplace. Please visit our website: ******************************** **ITW Company Overview** ITW was built on innovation and the strength of new ideas. These values have helped us expand into multiple platforms in nearly 60 countries. But at each of our businesses, the independent entrepreneurial spirit and freedom to innovate remain strong. It's the highly talented people at ITW businesses all over the world who drive our success through new products and customer driven solutions. Together, we are ITW-a Fortune 200 company that has prospered for 100 years, and changed the way people live and work, all over the world. Brooks Instrument is an Equal Opportunity Employer / Affirmative Action employer. All qualified applicants will receive consideration for employment without required to race, color, religion, sex, national origin, disability, or protected Veteran status. All your information will be kept confidential according to EEO guidelines. *ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential.* *As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship.* *All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.* **Job Location** Senior CNC Machinist (2nd shift) * 407 W Vine St, Hatfield, PA 19440, USA * Full-time

This full-time on-site position located in West Chester, PA. Why join the Acero Precision Team? Acero Precision, located in West Chester, PA is an industry leading Medical Device contract manufacturer producing the very best in precision engineered components. To succeed in today's manufacturing industry- with its demands to serve customers in a truly global environment- we rely on three vital resources: the newest engineering technologies, quality systems, and most importantly highly-skilled people. We invite you to become a member of an organization that has established an outstanding reputation for quality and excellence. Highly competitive wages, a state-of-the-art-facility, an emphasis on work/life balance, career advancement, a team-centered workplace culture, and the opportunity to be your best is waiting for you at Acero Precision. What We Offer 1st Shift: Premium Hourly Rate 2nd Shift: Premium Hourly Rate, Plus 15% 3rd Shift: Premium Hourly Rate, Plus 30% Overtime Additional Benefits for Weekend Hours in the Machining Departments 100% Employer Paid Medical Plan 100% Employer Paid Employee and Family Assistance Program (EAP) 100% Paid Uniforms Dental / Vision Benefit Plans Personal Time Off (PTO) Paid Holidays Relocation Assistance Participation in Company 401k Plan with an Employer Percentage Match Skills Training Workshops/Online Instruction Tuition Reimbursement What You Will Do Identify different types of tooling such as drills, end mills, reamers and inserts and know how to properly use them. Ensure that parts are efficiently and accurately inspected, deburred, properly tagged and moved to the next operation. Use measuring and inspection equipment, and inspect parts accurately to the ten-thousandths, (0.0001), of an inch. Maintain visual perception of a finished product and the ability to recognize an out of tolerance surface finish, burrs or any other machining defects. Manufacture a finished part and be held accountable for the accuracy of the end product. Work from blueprints, drawings and sketches involving the use of standard machine shop mathematics and precision measuring instruments. Must be able to identify material types and alloys using bar stock color codes. Hold dimensions to nominal value plus or minus the variation for each specific characteristic and adjust the machine accordingly. Must be able to operate 2 or more machines at the same time. Assist with machine break-down and setup Perform routine maintenance on machines before, during and after a production run and diagnose machine troubles Responsible for organizing and cleaning workstations daily, including the machine, bar feeder, bench, computer, mats and floor. No oil, coolant or chips should be evident in any areas, especially around the floor of the machine and in tight corners of the machine. Able to read and follow the steps of a designated program completely. Understand the concepts of surface feed, feed rates, geometry, G codes, offsets and other CNC programming functions. Who You Are Must Haves: Experience working with Mazak Lathes/Machining Centers or Star Swiss Style Lathes (Preferred but not necessary) At least one (1) - three (3) years in CNC machining operating. High School diploma required or equivalent experience in trade school certification Preferred: Experience with Swiss Star Lathes, Mazak 5-Axis Mills and Integrex Skills and Competencies Able to work with minimal supervision Attention to detail and ability to multi-task Possess a mechanical aptitude Strong problem-solving capabilities Basic proficiency in MS Excel and Word Learn And Grow: Acero Precision is committed to growing the capabilities of our employees. We continue to build a learning community where you can work with team leaders who are highly skilled and work towards expanding your technical capabilities. Our team consists of teachers and learners who collaborate with each other to enhance each other's growth! Acero Precision is proud to be an Equal Opportunity Employer. Acero Precision does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any basis covered by appropriate law. All employment is decided on the basis of qualifications, merit and business need. *Principals only. Recruiters please do not apply on behalf of your candidates to Acero Precision job posts. All applications and/or contact information submitted are kept on file and are the property of Acero Precision. Please note recruiting fees will not be honored with candidate applications submitted by recruiters. JOIN A TEAM DRIVEN TO PERFECTION!

Relevant skills and experience will be listed so you know why those jobs are a match **Job Description** **Job Req ID** 26047 **Work Type** Hybrid **Department** SLS Eaton's ES AMER NAS division is currently seeking a Regional Solutions Engineer. This role is supporting our West Territory candidates must reside in Sacramento CA, San Jose CA, Portland OR, Seattle WA or San Francisco CA. **What you'll do:** Eaton's Electrical Sector North America Sales team is seeking a Regional Solutions Engineer for the Channel Solutions Engineering Team. The role will be based in the west and must be within 50 miles of one of the large cities listed. The Regional Solutions Engineer will be responsible for providing presales application & technical support of the DIT and CPS product portfolio for field sales, partners, and end users in territory. The role will regionally align with field sales by traveling in-market for customer visits, conduct trainings for strategic partners, and provide technical expertise at trade shows. The achievement of assigned key performance indicators, pipeline management, superior customer engagement, and providing maximum regional coverage and market penetration will be key to this role. This role will partner with Solutions Architects for product-specific technical escalations, and Pre-Sales Engineers for channel-specific projects where the end user is in territory. • Provide general pre-sales application and technical support, and product guidance of DIT and CPS products for customers, end users, field sales, distributors and resellers within their region • Deliver exceptional service as the main point of customer contact through a positive attitude, high availability, accuracy, and responsiveness. • Partner with field sales to support and influence designated sales goals with both inside and outside engineering support by traveling in-market where applicable to perform customer on sites, attend trade shows, or conduct partner trainings • Analyze customer power systems and load requirements, interpret customer specifications, drawings, and schematics to select appropriate units for customer applications and build/validate Bill of Material. • Cross reference competitive product • Escalate appropriately to Solutions Architects • Provide quotations per customer requirements according to channel pricing procedures • Administer pricing programs such as deal registrations and special discounts • Profile sales opportunities and communicate leads to field sales organization and Solutions Architects accordingly • Manage assigned territory pipeline to optimize large project support and maximize win-rate • Provide single point of customer contact, owning the project from inception to implementation • Develop and maintain customer relationships through excellent customer service skills • Communicate regularly with the field sales organization to share and influence business intelligence • Proactively communicate voice of customer feedback to Solutions Architects **Qualifications:** **Basic Qualifications:** • Bachelor's Degree from an accredited institution • Minimum of three (3) years of professional experience in sales, customer support, marketing, or engineering • No relocation is offered for this position. All candidates must currently reside within 50 miles of one of locations listed to be considered. • Must be authorized to work in the United States without company sponsorship now or in the future **Preferred Qualifications:** • Understand and apply electrical standards of Underwriters Laboratories (UL) or The National Electrical Manufacturers Association (NEMA) or International Electrotechnical Commission (IEC) • Experience with Uninterruptible Power Supplies, IT Racks, Power Distribution Units, and IT distribution products **Skills:** • Must possess a valid and unrestricted driver's license • Travel in territory (up to 25 %) to perform IT assessments, partner trainings & trade shows • Detail oriented • Ability to multi-task and prioritize • Strong work ethic, desire to learn, openness to receive feedback • Effective communication skills; customer-focused The compensation range for this full-time position includes base pay and target sales performance incentive. This position has a target total compensation range of $107,813-158,125K Base salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. **Get Matched** Upload your resume and see jobs that match your skills and experience **Perks and Benefits** ** Healthcare and retirement savings programs** ** Wellness programs and resources** to support the wellbeing of you and your family ** Flexible work options** to help balance work/life demands ** Tuition Assistance** for ongoing learning and development ** Donation matching** to support the initiatives you care the most about ** Recognition programs** for a wide range of achievements ** Paid time off** with vacation, sick days and holiday observance Eaton strives to provide benefits and programs that are competitive and focused on employee well-being. These programs are offered across the United States and Puerto Rico, but specific programs and options available may depend on eligibility factors such as geographic locations, date of hire, employment type and the applicability of collective bargaining agreements.

Brooks Instrument, a global manufacturer of flow and pressure measurement and control products for critical applications, and a division of ITW (A Fortune 200 Company) is seeking candidates for a **Senior CNC Machinist (2nd shift).** This position will be based out of our headquarters facility in Hatfield, PA (Suburban Philadelphia). In addition to our Pennsylvania operations, Brooks maintains manufacturing locations in, Hungary, and Korea. The Company also maintains sales offices throughout the world. Our products are used in laboratory and process applications in end markets such as: life sciences, chemicals, semiconductor, analytical instruments, nuclear, and solar cells. **Basic Function** With minimal supervision, performs a wide variety of duties to support the Engineering Model Shop. This role requires a seasoned professional with extensive experience in both manual and CNC machining. The ideal candidate will have a deep understanding of machining processes, excellent problem-solving skills, and the ability to program CNC machines efficiently. This candidate should also have applicable knowledge of machine shop theory and procedures, shop mathematics, layout techniques and familiarity with machining various materials. **Essential Duties and Responsibilities** + Perform machining of engineering prototypes to support development programs. + Assignments may be broad in nature, requiring originality and ingenuity. + May be assisted by engineering personnel in developing unique parts/fixtures. + Make recommendations for design enhancements or improvements to support design for manufacturability optimization. + Operate with latitude for un-reviewed action or decisions. + Reviews progress with management. + Ability to make parts from analyzing drawings, sketches, specifications or sample parts to determine dimensions and tolerances of finished work-pieces. + Selects, aligns, secures holding fixtures, cutting tools, accessories, and materials on machines such as mills, lathes, grinders, etc. + Utilize EZ Trak on the Bridgeport milling machine. + Utilize Haas CNC Lathe and Mill; writing G-code and using IPS. + Verifies conformance of finished work-piece to specifications, using precise measuring equipment. (comparator, calipers, micrometers) + Support manufacturing, as required, for fixtures, tooling or small quantity parts. + Responsible for machine shop tooling maintenance on a regular basis. + Responsible for managing priorities and work schedule to support project timelines. + Responsible for ordering and managing raw material to support model shop requirements. + Knowledge of materials - general characteristics, machine-ability, heat-treating procedures. + Maintain a clean and orderly workplace. + Other duties not listed above to support departmental or corporate goals. + Regular attendance + Ability to get along with others in a large multidisciplinary team environment **Education and Experience** + High school diploma required + Minimum of 8 years machining experience and/or educated through an apprenticeship program, trade school, or vocational program. + Ability to work in MS Outlook, Excel, Word and Team Center Our employees enjoy competitive, merit-based salary plus excellent benefits including: + Health and dental insurance + Company Paid Life Insurance / Short and Long Term Disability + 401K plan with generous company match + Vacation, personal days and holidays + Continuing education reimbursement program + Flexible spending accounts The opportunity to join a well-established (70 + years in business) yet dynamically changing organization that works together as a team to meet the challenges of satisfying customers' needs and managing rapid growth to better compete in a global marketplace. Please visit our website: ******************************** **ITW Company Overview** ITW was built on innovation and the strength of new ideas. These values have helped us expand into multiple platforms in nearly 60 countries. But at each of our businesses, the independent entrepreneurial spirit and freedom to innovate remain strong. It's the highly talented people at ITW businesses all over the world who drive our success through new products and customer driven solutions. Together, we are ITW-a Fortune 200 company that has prospered for 100 years, and changed the way people live and work, all over the world. Brooks Instrument is an Equal Opportunity Employer / Affirmative Action employer. All qualified applicants will receive consideration for employment without required to race, color, religion, sex, national origin, disability, or protected Veteran status. All your information will be kept confidential according to EEO guidelines. _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. _ ITW is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

CNC Machinist position needed for a contract opportunity with Yoh's client located in Wilmington DE . Top Skills Should You Possess: Machinist (contract position), primary role: program and operate a CNC Haas 5-axis vertical machining center and non-CNC conventional machines producing prototype and small quantity parts. This position will provide manufacturing support and advise to multiple customers with a focus on meeting commitments and producing quality machine parts. What You'll Be Doing: Provide parts manufacturing leadership, experience and knowledge required to fabricate specified prototype machine parts. Emphasis of this position is the ability to leverage knowledge and experience to setup machine operations, program tool paths, interpret models and understand specified design intent. Working as part of a team with a focus on customer satisfaction is an important expectation of this role. What You Need to Bring to the Table: Priory experience and sound working knowledge of modern machining processes as well as conventional machining tools. Experience programming CNC machines, inputting the design specifications and ensuring the machine performs as required. Experience planning and creating holding fixtures, selecting cutting tools and securing materials onto shop machines. Experience adjusting machine settings to optimize part quality. Working knowledge of current CAD software packages and file types. Experience machining precision plastic parts and polyimide resin materials. Ability to interpret and understand drawings specifications, dimension nomenclature, tolerances including geometric tolerancing. Ability to inspect and measure finished parts to insure conformance to design specifications. Must adhered to safety protocols and procedures to ensure a safe working environment and integrity of machines. Ability to collaborated with engineers and designers for clarity on custom jobs and to refine manufacturing processes Opportunity is Calling, Apply Now! Recruiter: Claudia Holley Yoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here! Estimated Min Rate: $17.50 Estimated Max Rate: $25.00 Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.

The primary purpose of a Machinist is to setup and operate all machines in the Service Center in order to produce precision parts and instruments. The position applies knowledge of mechanics, mathematics, metal properties, layout and machining procedures. The position may require routine machine maintenance and programming capabilities. Essential Job Functions: Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. Select the appropriate tools, machines, and materials to be used in preparation of machinery work. Monitor the feed and speed of machines during the machining process. Work from drawings, work orders, and instructions covering production parts or tooling requirements. Machine parts to specifications, using machine tools, such as lathes, milling machines, shapers, or grinders. Set up, adjust, and operate all of the basic machining tools and many specialized or advanced variation tools to perform precision machining operations. Measure, examine, or test completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers. Set controls to regulate machining, or enter commands to retrieve, input, or edit computerized CNC machine control media. Position and fasten work pieces. Maintain Service Center machines (Haas, FPT, VBM, and Toshiba), applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures. Marginal Job Functions: Work with Production Supervisors to train and develop new personnel when needed. Record time and production on paper and computerized systems. Physical Demands & Abilities: Must be able to lift up to a maximum of 50 lbs. Must have Near Vision, Multilimb Coordination, and Manual Dexterity Physical Abilities. Supports: Shop Managers, Production Supervisors, Product Line Managers Minimum and Preferred Qualifications: High School Degree or equivalent minimally required. 2 Year Technical Degree or completion of Relevant Apprenticeship program required. Experience and on-the-job training may be used in lieu of formal apprenticeship program. Experience with CNC machinery and programming required. Experience with Fanuc and HAAS and controls preferred. At least 3-5 years professional experience minimally required, 5+ years' experience preferred.

Container Research Corporation, an AS9100 certified company with over 65 years in business, seeks a CNC Machinist/Programmer. The CNC machinist/programmer will input G&M codes and program, set up, and operate Fadal and HAAS CNC Machining Centers, and set up and run conventional lathes, milling centers, and other machine shop equipment. The right candidate will have 3 or more years of experience programming and operating CNC machinery. Knowledge of program sequence is required; candidates who can only edit existing programs will not be considered. The candidate will need working knowledge of knee mills, conventional lathes, drills, and all other related machinery, and be able to read a rule, square, protractor, micrometer, tape measure, and other measuring devices. Four day workweek (Mon-Thurs) and weekly pay! Full benefits package after 60 days of employment and paid time off after 6 months. Are you the right fit? Apply now! Job Type: Full-time, 4x10s Monday through Thursday, 6 AM to 4:30 PM Pay: $21.63 - $35 per hour | Rates in the $30s are only available to those with extensive experience writing and editing code at the console | Rate is dependent on skills and experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Aston, Pennsylvania Work Type: Full Time Container Research Corporation, an AS9100 certified company with over 65 years in business, seeks a CNC Machinist/Programmer. The CNC machinist/programmer will input G&M codes and program, set up, and operate Fadal and HAAS CNC Machining Centers, and set up and run conventional lathes, milling centers, and other machine shop equipment. The right candidate will have 3 or more years of experience programming and operating CNC machinery. Knowledge of program sequence is required; candidates who can only edit existing programs will not be considered. The candidate will need working knowledge of knee mills, conventional lathes, drills, and all other related machinery, and be able to read a rule, square, protractor, micrometer, tape measure, and other measuring devices. Job Type: Full-time, 4x10s Monday through Thursday, 6 AM to 4:30 PM Pay: $21.63 - $35 per hour | Rates in the $30s are only available to those with extensive experience writing and editing code at the console | Rate is dependent on skills and experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

CNC Machinist Level III Build innovative solutions and design the future. You can pursue your potential at Tecomet by working with a dedicated team to solve complex challenges, in partnership with industry-leading clients in medical device technology, aerospace, and defense industries. With the backing of our steadfast brand, you can be a part of the next era of manufacturing by bringing bold ideas to life and building products that improve on the status quo. What's In It For You: At Tecomet, we believe that everyone makes a difference and contributes to our overall success. We are a team bound together by pride in our work and dedication to our craft. Our leadership team shares the company's strategic direction so our workforce can remain informed and attain our internal goals and objectives. Let's talk about what we have to offer: Competitive pay and benefit packages Health Benefits start on day one 401k available with company match 9 Paid Holidays with 2 Floating Holidays PTO offered POSITION SUMMARY: Produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. May be required to perform some programming. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. PRINCIPAL RESPONSIBILITIES: Operate, set up, and could program CNC mills, Wire EDM's, and CNC lathes within specified tolerances following work instructions and in accordance with machine programs and engineering drawings Propose new production Set ups and change offsets/tooling in machines as part of the new setup Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained Read and evaluate blueprints or specifications Troubleshoot and understand CNC programs and processes Improve and produce work Instructions Assist Engineering with redesigning fixtures to increase quality standards and productivity, change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings Propose adjusted speeds and feeds for different machining requirements Perform routine maintenance as per daily machine checklist and adhere to PM schedule Perform hand finishing Follow Good Manufacturing and Good Document Practices (GMP/GDP) at all times including completion of job routers/ cards Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues Achieve set productivity targets and identify ways of improving productivity Record all activities in a timely manner on the job tracking system Identify and support Continuous Improvement activities Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required Maintain 5S/housekeeping standards within work area Performs other duties or special projects as required or as assigned by supervisor EDUCATION AND EXPERIENCE REQUIRED High School diploma or general education degree (GED) 5+ years CNC Machining experience Associates degree/certificate in Tooling & Machining or Machinist apprenticeship preferred GCSE/NVQ Maths and English is desirable (UK only) KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED Ability to operate, set up, and maintain a CNC Machine Ability to run multiple CNC Machines Ability to set up, adjust offsets and operate and run development and production jobs Ability to program with some level of supervision Solid necessary math skills, including measuring and keeping count records Effective at planning, prioritizing, and organizing tasks and activities with the ability to deal with competing demands within specified timescales Able to read and follow technical drawings and diagrammed instructions Proven record of quality, on-time production runs Demonstrable commitment to safety always Attention to detail alongside ability to perform repeatable task over a prolonged period Positive attitude, reliable, and a team player Problem solving ability Good communication skills, written and verbal Solid computer skills Ability to train new or lower-level machinist PHYSICAL DEMANDS/WORK ENVIRONMENT While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. Tecomet, Inc is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, gender identity, religion, sexual orientation, national origin, disability, genetic information, pregnancy, protected veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Aerotek - JobID: JP-004873512 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines; Inspect, trim, test, fixture, assemble, and package products; Perform other duties as assigned. . . Hiring Immediately >>

Aerotek - JobID: JP-004877742 [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment. . . Hiring Immediately >>

**CNC Machinist IV** Information** **Job Summary:** Produces machined parts by operating, setting up and programming computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Subject Matter Expert within the specialism of CNC Machinist (eg Lead in Training, Programming etc). The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. **Essential Duties and Responsibilities:** + Operate, set up and program CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings; + Propose new production set ups and change offsets/tooling in machines as part of the new setup; + Perform difficult CNC Machinist work including progressive machining of a variety of parts and different metals where very close tolerances must be maintained; + Read and evaluate blue prints or specifications; + Troubleshoot and solve CNC programs and processes; + Improve and produce work instructions; + Redesign fixtures to increase quality standards and productivity; + Subject Matter Expert within field (eg. Lead in Training, Programming, etc.); + Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear; + Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements including using a range of measuring equipment and interpreting readings; + Propose adjusted speeds and feeds for different machining requirements; + Perform routine maintenance as per daily machine checklist and adhere to preventive maintenance (PM )schedule; + Perform hand finishing; + Follow Good Manufacturing and Good Document Practices (GMP/GDP) at all times including completion of job routers/ cards; + Ensure safe working practices are carried out to minimize risks to the job holder and/or colleagues, including identifying and reporting Safety, Health & Environmental issues; + Achieve set productivity targets and identify ways of improving productivity; + Record all activities in a timely manner on the job tracking system; + Identify and support Continuous Improvement activities; + Identify and escalate manufacturing issues to the Team Leader and/or Supervisor, participating in the resolution as required; + Maintain 5S/housekeeping standards within work area; + Performs other duties or special projects as required or as assigned by supervisor. **Qualification Requirements** **Educational/Training Requirement:** + High School diploma or general education degree (GED); Associates degree/certificate in Tooling & Machining or Machinist apprenticeship preferred. + GCSE/NVQ Maths and English is desirable (UK only) **Experience:** + Experience of working in a production environment (E/D) **Knowledge, Skills, and Abilities:** + Ability to operate, set up, program and maintain a CNC Machine + Ability to run multiple CNC Machines + Ability to set up, adjust/alter program and operate and run development and production jobs + Solid necessary math skills, including measuring and keeping count records + Effective at planning, prioritizing and organizing tasks and activities with the ability to deal with competing demands within specified timescales + Able to read and follow technical drawings and diagrammed instructions + Proven record of quality, on-time production runs + Demonstrable commitment to safety at all times + Attention to detail alongside ability to perform repeatable task over a prolonged period of time + Able to perform physically demanding work-standing, bending, lifting 25 lbs regularly + Positive attitude, reliable, and a team player + Problem solving ability + Good communication skills, written and verbal + Solid computer skills **Other Requirements** **Mental Requirements:** The work environment is representative and typical of similar jobs in comparable organizations. **Physical Requirements:** While performing the duties of this job, the employee could be required to stand. The employee could frequently be required to walk; use hand to finger, handle, or feel; reach with hands and arms and talk or hear. The employee could be required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee could occasionally lift and or move up to 50 pounds. Specific vision abilities required by the job could include close vision, distance vision, peripheral vision and ability to adjust focus. **Americans with Disabilities Act (ADA):** Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company._ 5:30pm to 5:30am until further notice. Shift will change to 4:30pm 12:30am